]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - armsrc/appmain.c
CHG: removed a delay in readblock
[proxmark3-svn] / armsrc / appmain.c
index aa873e42263bba0da28815a9328e06c0abefe93a..4eabb319170c1e0390c8f8f531d4f7483317d35d 100644 (file)
@@ -10,7 +10,7 @@
 // executes.
 //-----------------------------------------------------------------------------
 #include "usb_cdc.h"
-#include "cmd.h"
+//#include "cmd.h"
 #include "proxmark3.h"
 #include "apps.h"
 #include "util.h"
@@ -182,9 +182,7 @@ static int ReadAdc(int ch)
 
 int AvgAdc(int ch) // was static - merlok
 {
-       int i;
-       int a = 0;
-
+       int i, a = 0;
        for(i = 0; i < 32; ++i)
                a += ReadAdc(ch);
 
@@ -194,9 +192,11 @@ int AvgAdc(int ch) // was static - merlok
 
 void MeasureAntennaTuning(void) {
 
-       uint8_t* LF_Results = BigBuf_malloc(256);
+       uint8_t LF_Results[256];
        int i, adcval = 0, peak = 0, peakv = 0, peakf = 0;
        int vLf125 = 0, vLf134 = 0, vHf = 0;    // in mV
+
+       memset(LF_Results, 0, sizeof(LF_Results));
        LED_B_ON();
 
 /*
@@ -210,7 +210,7 @@ void MeasureAntennaTuning(void) {
   
        FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-
+               
        for  (i = 255; i >= 19; i--) {
                WDT_HIT();
                FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);
@@ -219,7 +219,7 @@ void MeasureAntennaTuning(void) {
                if (i==95)      vLf125 = adcval; // voltage at 125Khz
                if (i==89)      vLf134 = adcval; // voltage at 134Khz
 
-               LF_Results[i] = adcval>>8; // scale int to fit in byte for graphing purposes
+               LF_Results[i] = adcval >> 8; // scale int to fit in byte for graphing purposes
                if(LF_Results[i] > peak) {
                        peakv = adcval;
                        peak = LF_Results[i];
@@ -227,8 +227,6 @@ void MeasureAntennaTuning(void) {
                }
        }
 
-       for (i = 18; i >= 0; i--) LF_Results[i] = 0;
-       
        LED_A_ON();
        // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
@@ -236,10 +234,8 @@ void MeasureAntennaTuning(void) {
        SpinDelay(20);
        vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10;
 
-       cmd_send(CMD_MEASURED_ANTENNA_TUNING, vLf125 | (vLf134<<16), vHf, peakf | (peakv<<16), LF_Results, 256);
+       cmd_send(CMD_MEASURED_ANTENNA_TUNING, vLf125 | (vLf134 << 16), vHf, peakf | (peakv << 16), LF_Results, 256);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-
-       BigBuf_free(); BigBuf_Clear_ext(false);
        LEDsoff();
 }
 
@@ -1054,17 +1050,17 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_SIMULATE_TAG_LEGIC_RF:
                        LegicRfSimulate(c->arg[0], c->arg[1], c->arg[2]);
                        break;
-
                case CMD_WRITER_LEGIC_RF:
-                       LegicRfWriter( c->arg[0], c->arg[1], c->arg[2]);
+                       LegicRfWriter( c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
-
-               case CMD_RAW_WRITER_LEGIC_RF:
-                       LegicRfRawWriter(c->arg[0], c->arg[1], c->arg[2]);
-                       break;
-
                case CMD_READER_LEGIC_RF:
                        LegicRfReader(c->arg[0], c->arg[1], c->arg[2]);
+                       break;                  
+               case CMD_LEGIC_INFO:
+                       LegicRfInfo();
+                       break;
+               case CMD_LEGIC_ESET:
+                       LegicEMemSet(c->arg[0], c->arg[1], c->d.asBytes);
                        break;
 #endif
 
@@ -1194,7 +1190,6 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_MIFARE_DESFIRE:
                        MifareSendCommand(c->arg[0], c->arg[1], c->d.asBytes);
                        break;
-
                case CMD_MIFARE_COLLECT_NONCES:
                        break;
 #endif
@@ -1225,7 +1220,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_READER_ICLASS_REPLAY:
                    ReaderIClass_Replay(c->arg[0], c->d.asBytes);
                        break;
-       case CMD_ICLASS_EML_MEMSET:
+               case CMD_ICLASS_EML_MEMSET:
                        emlSet(c->d.asBytes,c->arg[0], c->arg[1]);
                        break;
                case CMD_ICLASS_WRITEBLOCK:
@@ -1279,19 +1274,36 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        LED_B_ON();
                        uint8_t *BigBuf = BigBuf_get_addr();
                        size_t len = 0;
-                       for(size_t i=0; i<c->arg[1]; i += USB_CMD_DATA_SIZE) {
-                               len = MIN((c->arg[1] - i),USB_CMD_DATA_SIZE);
-                               cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K,i,len,BigBuf_get_traceLen(),BigBuf+c->arg[0]+i,len);
+                       size_t startidx = c->arg[0];
+                       uint8_t isok = FALSE;
+                       // arg0 = startindex
+                       // arg1 = length bytes to transfer
+                       // arg2 = RFU
+                       //Dbprintf("transfer to client parameters: %llu | %llu | %llu", c->arg[0], c->arg[1], c->arg[2]);
+                       
+                       for(size_t i = 0; i < c->arg[1]; i += USB_CMD_DATA_SIZE) {
+                               len = MIN( (c->arg[1] - i), USB_CMD_DATA_SIZE);
+                               isok = cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K, i, len, BigBuf_get_traceLen(), BigBuf + startidx + i, len);
+                               if (!isok) 
+                                       Dbprintf("transfer to client failed ::  | bytes %d", len);
                        }
                        // Trigger a finish downloading signal with an ACK frame
-                       cmd_send(CMD_ACK,1,0,BigBuf_get_traceLen(),getSamplingConfig(),sizeof(sample_config));
+                       cmd_send(CMD_ACK, 1, 0, BigBuf_get_traceLen(), getSamplingConfig(), sizeof(sample_config));
                        LED_B_OFF();
                        break;
                }
                case CMD_DOWNLOADED_SIM_SAMPLES_125K: {
+                       // iceman; since changing fpga_bitstreams clears bigbuff, Its better to call it before.
+                       // to be able to use this one for uploading data to device 
+                       // arg1 = 0 upload for LF usage 
+                       //        1 upload for HF usage
+                       if ( c->arg[1] == 0 )
+                               FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+                       else 
+                               FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
                        uint8_t *b = BigBuf_get_addr();
                        memcpy( b + c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
-                       cmd_send(CMD_ACK,0,0,0,0,0);
+                       cmd_send(CMD_ACK,1,0,0,0,0);
                        break;
                }
                case CMD_DOWNLOAD_EML_BIGBUF: {
Impressum, Datenschutz