#include "cmdparser.h"
#include "cmdhw.h"
#include "cmdmain.h"
+#include "cmddata.h"
+#include "data.h"
/* low-level hardware control */
static int CmdHelp(const char *Cmd);
-static void lookupChipID(uint32_t iChipID)
+static void lookupChipID(uint32_t iChipID, uint32_t mem_used)
{
- char asBuff[100];
- switch(iChipID)
- {
- case 0x270B0A40:
- sprintf(asBuff,"AT91SAM7S512 Rev A");
- break;
- case 0x270B0A4F:
- sprintf(asBuff,"AT91SAM7S512 Rev B");
- break;
- case 0x270D0940:
- sprintf(asBuff,"AT91SAM7S256 Rev A");
- break;
- case 0x270B0941:
- sprintf(asBuff,"AT91SAM7S256 Rev B");
- break;
- case 0x270B0942:
- sprintf(asBuff,"AT91SAM7S256 Rev C");
- break;
- case 0x270B0943:
- sprintf(asBuff,"AT91SAM7S256 Rev D");
- break;
- case 0x270C0740:
- sprintf(asBuff,"AT91SAM7S128 Rev A");
- break;
- case 0x270A0741:
- sprintf(asBuff,"AT91SAM7S128 Rev B");
- break;
- case 0x270A0742:
- sprintf(asBuff,"AT91SAM7S128 Rev C");
- break;
- case 0x270A0743:
- sprintf(asBuff,"AT91SAM7S128 Rev D");
- break;
- case 0x27090540:
- sprintf(asBuff,"AT91SAM7S64 Rev A");
- break;
- case 0x27090543:
- sprintf(asBuff,"AT91SAM7S64 Rev B");
- break;
- case 0x27090544:
- sprintf(asBuff,"AT91SAM7S64 Rev C");
- break;
- case 0x27080342:
- sprintf(asBuff,"AT91SAM7S321 Rev A");
- break;
- case 0x27080340:
- sprintf(asBuff,"AT91SAM7S32 Rev A");
- break;
- case 0x27080341:
- sprintf(asBuff,"AT91SAM7S32 Rev B");
- break;
- case 0x27050241:
- sprintf(asBuff,"AT9SAM7S161 Rev A");
- break;
- case 0x27050240:
- sprintf(asBuff,"AT91SAM7S16 Rev A");
- break;
+ char asBuff[120];
+ memset(asBuff, 0, sizeof(asBuff));
+ uint32_t mem_avail = 0;
+
+ switch(iChipID) {
+ case 0x270B0A40: sprintf(asBuff,"AT91SAM7S512 Rev A"); break;
+ case 0x270B0A4F: sprintf(asBuff,"AT91SAM7S512 Rev B"); break;
+ case 0x270D0940: sprintf(asBuff,"AT91SAM7S256 Rev A"); break;
+ case 0x270B0941: sprintf(asBuff,"AT91SAM7S256 Rev B"); break;
+ case 0x270B0942: sprintf(asBuff,"AT91SAM7S256 Rev C"); break;
+ case 0x270B0943: sprintf(asBuff,"AT91SAM7S256 Rev D"); break;
+ case 0x270C0740: sprintf(asBuff,"AT91SAM7S128 Rev A"); break;
+ case 0x270A0741: sprintf(asBuff,"AT91SAM7S128 Rev B"); break;
+ case 0x270A0742: sprintf(asBuff,"AT91SAM7S128 Rev C"); break;
+ case 0x270A0743: sprintf(asBuff,"AT91SAM7S128 Rev D"); break;
+ case 0x27090540: sprintf(asBuff,"AT91SAM7S64 Rev A"); break;
+ case 0x27090543: sprintf(asBuff,"AT91SAM7S64 Rev B"); break;
+ case 0x27090544: sprintf(asBuff,"AT91SAM7S64 Rev C"); break;
+ case 0x27080342: sprintf(asBuff,"AT91SAM7S321 Rev A"); break;
+ case 0x27080340: sprintf(asBuff,"AT91SAM7S32 Rev A"); break;
+ case 0x27080341: sprintf(asBuff,"AT91SAM7S32 Rev B"); break;
+ case 0x27050241: sprintf(asBuff,"AT9SAM7S161 Rev A"); break;
+ case 0x27050240: sprintf(asBuff,"AT91SAM7S16 Rev A"); break;
}
PrintAndLog("uC: %s",asBuff);
- switch((iChipID&0xE0)>>5)
- {
- case 1:
- sprintf(asBuff,"ARM946ES");
- break;
- case 2:
- sprintf(asBuff,"ARM7TDMI");
- break;
- case 4:
- sprintf(asBuff,"ARM920T");
- break;
- case 5:
- sprintf(asBuff,"ARM926EJS");
- break;
+ switch( (iChipID & 0xE0) >> 5) {
+ case 1: sprintf(asBuff,"ARM946ES"); break;
+ case 2: sprintf(asBuff,"ARM7TDMI"); break;
+ case 4: sprintf(asBuff,"ARM920T"); break;
+ case 5: sprintf(asBuff,"ARM926EJS"); break;
}
PrintAndLog("Embedded Processor: %s",asBuff);
- switch((iChipID&0xF00)>>8)
- {
- case 0:
- sprintf(asBuff,"None");
- break;
- case 1:
- sprintf(asBuff,"8K bytes");
- break;
- case 2:
- sprintf(asBuff,"16K bytes");
- break;
- case 3:
- sprintf(asBuff,"32K bytes");
- break;
- case 5:
- sprintf(asBuff,"64K bytes");
- break;
- case 7:
- sprintf(asBuff,"128K bytes");
- break;
- case 9:
- sprintf(asBuff,"256K bytes");
- break;
- case 10:
- sprintf(asBuff,"512K bytes");
- break;
- case 12:
- sprintf(asBuff,"1024K bytes");
- break;
- case 14:
- sprintf(asBuff,"2048K bytes");
- break;
+ switch( (iChipID & 0xF00) >> 8) {
+ case 0: mem_avail = 0; break;
+ case 1: mem_avail = 8; break;
+ case 2: mem_avail = 16; break;
+ case 3: mem_avail = 32; break;
+ case 5: mem_avail = 64; break;
+ case 7: mem_avail = 128; break;
+ case 9: mem_avail = 256; break;
+ case 10: mem_avail = 512; break;
+ case 12: mem_avail = 1024; break;
+ case 14: mem_avail = 2048; break;
}
- PrintAndLog("Nonvolatile Program Memory Size: %s",asBuff);
- switch((iChipID&0xF000)>>12)
- {
- case 0:
- sprintf(asBuff,"None");
- break;
- case 1:
- sprintf(asBuff,"8K bytes");
- break;
- case 2:
- sprintf(asBuff,"16K bytes");
- break;
- case 3:
- sprintf(asBuff,"32K bytes");
- break;
- case 5:
- sprintf(asBuff,"64K bytes");
- break;
- case 7:
- sprintf(asBuff,"128K bytes");
- break;
- case 9:
- sprintf(asBuff,"256K bytes");
- break;
- case 10:
- sprintf(asBuff,"512K bytes");
- break;
- case 12:
- sprintf(asBuff,"1024K bytes");
- break;
- case 14:
- sprintf(asBuff,"2048K bytes");
- break;
+
+ uint32_t mem_left = 0;
+ if ( mem_avail > 0 )
+ mem_left = (mem_avail * 1024) - mem_used;
+
+ PrintAndLog("Nonvolatile Program Memory Size: %uK bytes. Used: %u bytes (%2.0f\%). Free: %u bytes (%2.0f\%).",
+ mem_avail,
+ mem_used,
+ mem_avail == 0 ? 0.0f : (float)mem_used/(mem_avail*1024)*100,
+ mem_left,
+ mem_avail == 0 ? 0.0f : (float)mem_left/(mem_avail*1024)*100
+ );
+
+ switch( (iChipID & 0xF000) >> 12 ) {
+ case 0: sprintf(asBuff,"None"); break;
+ case 1: sprintf(asBuff,"8K bytes"); break;
+ case 2: sprintf(asBuff,"16K bytes"); break;
+ case 3: sprintf(asBuff,"32K bytes"); break;
+ case 5: sprintf(asBuff,"64K bytes"); break;
+ case 7: sprintf(asBuff,"128K bytes"); break;
+ case 9: sprintf(asBuff,"256K bytes"); break;
+ case 10: sprintf(asBuff,"512K bytes"); break;
+ case 12: sprintf(asBuff,"1024K bytes"); break;
+ case 14: sprintf(asBuff,"2048K bytes"); break;
}
PrintAndLog("Second Nonvolatile Program Memory Size: %s",asBuff);
- switch((iChipID&0xF0000)>>16)
- {
- case 1:
- sprintf(asBuff,"1K bytes");
- break;
- case 2:
- sprintf(asBuff,"2K bytes");
- break;
- case 3:
- sprintf(asBuff,"6K bytes");
- break;
- case 4:
- sprintf(asBuff,"112K bytes");
- break;
- case 5:
- sprintf(asBuff,"4K bytes");
- break;
- case 6:
- sprintf(asBuff,"80K bytes");
- break;
- case 7:
- sprintf(asBuff,"160K bytes");
- break;
- case 8:
- sprintf(asBuff,"8K bytes");
- break;
- case 9:
- sprintf(asBuff,"16K bytes");
- break;
- case 10:
- sprintf(asBuff,"32K bytes");
- break;
- case 11:
- sprintf(asBuff,"64K bytes");
- break;
- case 12:
- sprintf(asBuff,"128K bytes");
- break;
- case 13:
- sprintf(asBuff,"256K bytes");
- break;
- case 14:
- sprintf(asBuff,"96K bytes");
- break;
- case 15:
- sprintf(asBuff,"512K bytes");
- break;
+ switch( (iChipID & 0xF0000) >> 16) {
+ case 1: sprintf(asBuff,"1K bytes"); break;
+ case 2: sprintf(asBuff,"2K bytes"); break;
+ case 3: sprintf(asBuff,"6K bytes"); break;
+ case 4: sprintf(asBuff,"112K bytes"); break;
+ case 5: sprintf(asBuff,"4K bytes"); break;
+ case 6: sprintf(asBuff,"80K bytes"); break;
+ case 7: sprintf(asBuff,"160K bytes"); break;
+ case 8: sprintf(asBuff,"8K bytes"); break;
+ case 9: sprintf(asBuff,"16K bytes"); break;
+ case 10: sprintf(asBuff,"32K bytes"); break;
+ case 11: sprintf(asBuff,"64K bytes"); break;
+ case 12: sprintf(asBuff,"128K bytes"); break;
+ case 13: sprintf(asBuff,"256K bytes"); break;
+ case 14: sprintf(asBuff,"96K bytes"); break;
+ case 15: sprintf(asBuff,"512K bytes");break;
}
PrintAndLog("Internal SRAM Size: %s",asBuff);
- switch((iChipID&0xFF00000)>>20)
- {
- case 0x19:
- sprintf(asBuff,"AT91SAM9xx Series");
- break;
- case 0x29:
- sprintf(asBuff,"AT91SAM9XExx Series");
- break;
- case 0x34:
- sprintf(asBuff,"AT91x34 Series");
- break;
- case 0x37:
- sprintf(asBuff,"CAP7 Series");
- break;
- case 0x39:
- sprintf(asBuff,"CAP9 Series");
- break;
- case 0x3B:
- sprintf(asBuff,"CAP11 Series");
- break;
- case 0x40:
- sprintf(asBuff,"AT91x40 Series");
- break;
- case 0x42:
- sprintf(asBuff,"AT91x42 Series");
- break;
- case 0x55:
- sprintf(asBuff,"AT91x55 Series");
- break;
- case 0x60:
- sprintf(asBuff,"AT91SAM7Axx Series");
- break;
- case 0x61:
- sprintf(asBuff,"AT91SAM7AQxx Series");
- break;
- case 0x63:
- sprintf(asBuff,"AT91x63 Series");
- break;
- case 0x70:
- sprintf(asBuff,"AT91SAM7Sxx Series");
- break;
- case 0x71:
- sprintf(asBuff,"AT91SAM7XCxx Series");
- break;
- case 0x72:
- sprintf(asBuff,"AT91SAM7SExx Series");
- break;
- case 0x73:
- sprintf(asBuff,"AT91SAM7Lxx Series");
- break;
- case 0x75:
- sprintf(asBuff,"AT91SAM7Xxx Series");
- break;
- case 0x92:
- sprintf(asBuff,"AT91x92 Series");
- break;
- case 0xF0:
- sprintf(asBuff,"AT75Cxx Series");
- break;
+ switch( (iChipID & 0xFF00000) >> 20) {
+ case 0x19: sprintf(asBuff,"AT91SAM9xx Series"); break;
+ case 0x29: sprintf(asBuff,"AT91SAM9XExx Series"); break;
+ case 0x34: sprintf(asBuff,"AT91x34 Series"); break;
+ case 0x37: sprintf(asBuff,"CAP7 Series"); break;
+ case 0x39: sprintf(asBuff,"CAP9 Series"); break;
+ case 0x3B: sprintf(asBuff,"CAP11 Series"); break;
+ case 0x40: sprintf(asBuff,"AT91x40 Series"); break;
+ case 0x42: sprintf(asBuff,"AT91x42 Series"); break;
+ case 0x55: sprintf(asBuff,"AT91x55 Series"); break;
+ case 0x60: sprintf(asBuff,"AT91SAM7Axx Series"); break;
+ case 0x61: sprintf(asBuff,"AT91SAM7AQxx Series"); break;
+ case 0x63: sprintf(asBuff,"AT91x63 Series"); break;
+ case 0x70: sprintf(asBuff,"AT91SAM7Sxx Series"); break;
+ case 0x71: sprintf(asBuff,"AT91SAM7XCxx Series"); break;
+ case 0x72: sprintf(asBuff,"AT91SAM7SExx Series"); break;
+ case 0x73: sprintf(asBuff,"AT91SAM7Lxx Series"); break;
+ case 0x75: sprintf(asBuff,"AT91SAM7Xxx Series"); break;
+ case 0x92: sprintf(asBuff,"AT91x92 Series"); break;
+ case 0xF0: sprintf(asBuff,"AT75Cxx Series"); break;
}
PrintAndLog("Architecture Identifier: %s",asBuff);
- switch((iChipID&0x70000000)>>28)
- {
- case 0:
- sprintf(asBuff,"ROM");
- break;
- case 1:
- sprintf(asBuff,"ROMless or on-chip Flash");
- break;
- case 4:
- sprintf(asBuff,"SRAM emulating ROM");
- break;
- case 2:
- sprintf(asBuff,"Embedded Flash Memory");
- break;
- case 3:
- sprintf(asBuff,"ROM and Embedded Flash Memory\nNVPSIZ is ROM size\nNVPSIZ2 is Flash size");
- break;
+ switch( (iChipID & 0x70000000) >> 28 ) {
+ case 0: sprintf(asBuff,"ROM"); break;
+ case 1: sprintf(asBuff,"ROMless or on-chip Flash"); break;
+ case 2: sprintf(asBuff,"Embedded Flash Memory"); break;
+ case 3: sprintf(asBuff,"ROM and Embedded Flash Memory\nNVPSIZ is ROM size\nNVPSIZ2 is Flash size"); break;
+ case 4: sprintf(asBuff,"SRAM emulating ROM"); break;
}
PrintAndLog("Nonvolatile Program Memory Type: %s",asBuff);
}
int CmdDetectReader(const char *Cmd)
{
- UsbCommand c={CMD_LISTEN_READER_FIELD};
- // 'l' means LF - 125/134 kHz
- if(*Cmd == 'l') {
- c.arg[0] = 1;
- } else if (*Cmd == 'h') {
- c.arg[0] = 2;
- } else if (*Cmd != '\0') {
- PrintAndLog("use 'detectreader' or 'detectreader l' or 'detectreader h'");
- return 0;
- }
- SendCommand(&c);
- return 0;
+ UsbCommand c = {CMD_LISTEN_READER_FIELD};
+ // 'l' means LF - 125/134 kHz
+ if(*Cmd == 'l') {
+ c.arg[0] = 1;
+ } else if (*Cmd == 'h') {
+ c.arg[0] = 2;
+ } else if (*Cmd != '\0') {
+ PrintAndLog("use 'detectreader' or 'detectreader l' or 'detectreader h'");
+ return 0;
+ }
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
}
// ## FPGA Control
int CmdFPGAOff(const char *Cmd)
{
- UsbCommand c = {CMD_FPGA_MAJOR_MODE_OFF};
- SendCommand(&c);
- return 0;
+ UsbCommand c = {CMD_FPGA_MAJOR_MODE_OFF};
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
}
int CmdLCD(const char *Cmd)
{
- int i, j;
+ int i, j;
- UsbCommand c={CMD_LCD};
- sscanf(Cmd, "%x %d", &i, &j);
- while (j--) {
- c.arg[0] = i & 0x1ff;
- SendCommand(&c);
- }
- return 0;
+ UsbCommand c = {CMD_LCD};
+ sscanf(Cmd, "%x %d", &i, &j);
+ while (j--) {
+ c.arg[0] = i & 0x1ff;
+ clearCommandBuffer();
+ SendCommand(&c);
+ }
+ return 0;
}
int CmdLCDReset(const char *Cmd)
{
- UsbCommand c = {CMD_LCD_RESET, {strtol(Cmd, NULL, 0), 0, 0}};
- SendCommand(&c);
- return 0;
+ UsbCommand c = {CMD_LCD_RESET, {strtol(Cmd, NULL, 0), 0, 0}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
}
int CmdReadmem(const char *Cmd)
{
- UsbCommand c = {CMD_READ_MEM, {strtol(Cmd, NULL, 0), 0, 0}};
- SendCommand(&c);
- return 0;
+ UsbCommand c = {CMD_READ_MEM, {strtol(Cmd, NULL, 0), 0, 0}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
}
int CmdReset(const char *Cmd)
{
- UsbCommand c = {CMD_HARDWARE_RESET};
- SendCommand(&c);
- return 0;
+ UsbCommand c = {CMD_HARDWARE_RESET};
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
}
/*
*/
int CmdSetDivisor(const char *Cmd)
{
- UsbCommand c = {CMD_SET_LF_DIVISOR, {strtol(Cmd, NULL, 0), 0, 0}};
- if (c.arg[0] < 19 || c.arg[0] > 255) {
- PrintAndLog("divisor must be between 19 and 255");
- } else {
- SendCommand(&c);
- PrintAndLog("Divisor set, expected freq=%dHz", 12000000 / (c.arg[0]+1));
- }
- return 0;
+ UsbCommand c = {CMD_SET_LF_DIVISOR, {strtol(Cmd, NULL, 0), 0, 0}};
+
+ if (c.arg[0] < 19 || c.arg[0] > 255) {
+ PrintAndLog("divisor must be between 19 and 255");
+ return 1;
+ }
+ // 12 000 000 (12Mhz)
+ //
+ clearCommandBuffer();
+ SendCommand(&c);
+ PrintAndLog("Divisor set, expected %.1f KHz", ((double)12000 / (c.arg[0]+1)) );
+ return 0;
}
int CmdSetMux(const char *Cmd)
{
- UsbCommand c={CMD_SET_ADC_MUX};
- if (strcmp(Cmd, "lopkd") == 0) {
- c.arg[0] = 0;
- } else if (strcmp(Cmd, "loraw") == 0) {
- c.arg[0] = 1;
- } else if (strcmp(Cmd, "hipkd") == 0) {
- c.arg[0] = 2;
- } else if (strcmp(Cmd, "hiraw") == 0) {
- c.arg[0] = 3;
- }
- SendCommand(&c);
- return 0;
+ UsbCommand c = {CMD_SET_ADC_MUX};
+ if (strcmp(Cmd, "lopkd") == 0) c.arg[0] = 0;
+ else if (strcmp(Cmd, "loraw") == 0) c.arg[0] = 1;
+ else if (strcmp(Cmd, "hipkd") == 0) c.arg[0] = 2;
+ else if (strcmp(Cmd, "hiraw") == 0) c.arg[0] = 3;
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
}
int CmdTune(const char *Cmd)
{
- UsbCommand c = {CMD_MEASURE_ANTENNA_TUNING};
- SendCommand(&c);
- return 0;
+ return CmdTuneSamples(Cmd);
}
int CmdVersion(const char *Cmd)
{
- UsbCommand c = {CMD_VERSION};
- UsbCommand resp;
- SendCommand(&c);
- if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
- lookupChipID(resp.arg[0]);
- }
- return 0;
+ clearCommandBuffer();
+ UsbCommand c = {CMD_VERSION};
+ static UsbCommand resp = {0, {0, 0, 0}};
+
+ if (resp.arg[0] == 0 && resp.arg[1] == 0) { // no cached information available
+ SendCommand(&c);
+ if (WaitForResponseTimeout(CMD_ACK, &resp, 1000)) {
+ PrintAndLog("Proxmark3 RFID instrument");
+ PrintAndLog((char*)resp.d.asBytes);
+ lookupChipID(resp.arg[0], resp.arg[1]);
+ }
+ } else {
+ PrintAndLog("[[[ Cached information ]]]\n");
+ PrintAndLog("Proxmark3 RFID instrument");
+ PrintAndLog((char*)resp.d.asBytes);
+ lookupChipID(resp.arg[0], resp.arg[1]);
+ PrintAndLog("");
+ }
+ return 0;
+}
+
+int CmdStatus(const char *Cmd)
+{
+ uint8_t speed_test_buffer[USB_CMD_DATA_SIZE];
+ sample_buf = speed_test_buffer;
+ clearCommandBuffer();
+ UsbCommand c = {CMD_STATUS};
+ SendCommand(&c);
+ if (!WaitForResponseTimeout(CMD_ACK, &c, 1900))
+ PrintAndLog("Status command failed. USB Speed Test timed out");
+ return 0;
+}
+
+int CmdPing(const char *Cmd)
+{
+ clearCommandBuffer();
+ UsbCommand resp;
+ UsbCommand c = {CMD_PING};
+ SendCommand(&c);
+ if (WaitForResponseTimeout(CMD_ACK, &resp, 1000))
+ PrintAndLog("Ping successfull");
+ else
+ PrintAndLog("Ping failed");
+ return 0;
}
static command_t CommandTable[] =
{
- {"help", CmdHelp, 1, "This help"},
- {"detectreader", CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)"},
- {"fpgaoff", CmdFPGAOff, 0, "Set FPGA off"},
- {"lcd", CmdLCD, 0, "<HEX command> <count> -- Send command/data to LCD"},
- {"lcdreset", CmdLCDReset, 0, "Hardware reset LCD"},
- {"readmem", CmdReadmem, 0, "[address] -- Read memory at decimal address from flash"},
- {"reset", CmdReset, 0, "Reset the Proxmark3"},
- {"setlfdivisor", CmdSetDivisor, 0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
- {"setmux", CmdSetMux, 0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
- {"tune", CmdTune, 0, "Measure antenna tuning"},
- {"version", CmdVersion, 0, "Show version inforation about the connected Proxmark"},
- {NULL, NULL, 0, NULL}
+ {"help", CmdHelp, 1, "This help"},
+ {"detectreader", CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)"},
+ {"fpgaoff", CmdFPGAOff, 0, "Set FPGA off"},
+ {"lcd", CmdLCD, 0, "<HEX command> <count> -- Send command/data to LCD"},
+ {"lcdreset", CmdLCDReset, 0, "Hardware reset LCD"},
+ {"readmem", CmdReadmem, 0, "[address] -- Read memory at decimal address from flash"},
+ {"reset", CmdReset, 0, "Reset the Proxmark3"},
+ {"setlfdivisor", CmdSetDivisor, 0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
+ {"setmux", CmdSetMux, 0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
+ {"tune", CmdTune, 0, "Measure antenna tuning"},
+ {"version", CmdVersion, 0, "Show version information about the connected Proxmark"},
+ {"status", CmdStatus, 0, "Show runtime status information about the connected Proxmark"},
+ {"ping", CmdPing, 0, "Test if the pm3 is responsive"},
+ {NULL, NULL, 0, NULL}
};
-int CmdHW(const char *Cmd)
-{
- CmdsParse(CommandTable, Cmd);
- return 0;
+int CmdHW(const char *Cmd) {
+ clearCommandBuffer();
+ CmdsParse(CommandTable, Cmd);
+ return 0;
}
int CmdHelp(const char *Cmd)
{
- CmdsHelp(CommandTable);
- return 0;
+ CmdsHelp(CommandTable);
+ return 0;
}
projects / proxmark3-svn / blobdiff