]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - armsrc/fpgaloader.c
chg: changed comment
[proxmark3-svn] / armsrc / fpgaloader.c
index 077b378a918b438cb0dc625642d22a7543eaabbf..86f144cfefd6a5c43b7ad7301442bbf1b29432c0 100644 (file)
@@ -9,10 +9,32 @@
 // Routines to load the FPGA image, and then to configure the FPGA's major
 // mode once it is configured.
 //-----------------------------------------------------------------------------
 // Routines to load the FPGA image, and then to configure the FPGA's major
 // mode once it is configured.
 //-----------------------------------------------------------------------------
+
+#include <stdint.h>
+#include <stddef.h>
+#include <stdbool.h>
+#include "fpgaloader.h"
 #include "proxmark3.h"
 #include "proxmark3.h"
-#include "apps.h"
 #include "util.h"
 #include "string.h"
 #include "util.h"
 #include "string.h"
+#include "BigBuf.h"
+#include "zlib.h"
+
+extern void Dbprintf(const char *fmt, ...);
+
+// remember which version of the bitstream we have already downloaded to the FPGA
+static int downloaded_bitstream = FPGA_BITSTREAM_ERR;
+
+// this is where the bitstreams are located in memory:
+extern uint8_t _binary_obj_fpga_all_bit_z_start, _binary_obj_fpga_all_bit_z_end;
+
+static uint8_t *fpga_image_ptr = NULL;
+static uint32_t uncompressed_bytes_cnt;
+
+static const uint8_t _bitparse_fixed_header[] = {0x00, 0x09, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x00, 0x00, 0x01};
+#define FPGA_BITSTREAM_FIXED_HEADER_SIZE       sizeof(_bitparse_fixed_header)
+#define OUTPUT_BUFFER_LEN              80
+#define FPGA_INTERLEAVE_SIZE   288
 
 //-----------------------------------------------------------------------------
 // Set up the Serial Peripheral Interface as master
 
 //-----------------------------------------------------------------------------
 // Set up the Serial Peripheral Interface as master
@@ -95,8 +117,7 @@ void SetupSpi(int mode)
 // Set up the synchronous serial port, with the one set of options that we
 // always use when we are talking to the FPGA. Both RX and TX are enabled.
 //-----------------------------------------------------------------------------
 // Set up the synchronous serial port, with the one set of options that we
 // always use when we are talking to the FPGA. Both RX and TX are enabled.
 //-----------------------------------------------------------------------------
-void FpgaSetupSsc(void)
-{
+void FpgaSetupSsc(void) {
        // First configure the GPIOs, and get ourselves a clock.
        AT91C_BASE_PIOA->PIO_ASR =
                GPIO_SSC_FRAME  |
        // First configure the GPIOs, and get ourselves a clock.
        AT91C_BASE_PIOA->PIO_ASR =
                GPIO_SSC_FRAME  |
@@ -134,22 +155,104 @@ void FpgaSetupSsc(void)
 // ourselves, not to another buffer). The stuff to manipulate those buffers
 // is in apps.h, because it should be inlined, for speed.
 //-----------------------------------------------------------------------------
 // ourselves, not to another buffer). The stuff to manipulate those buffers
 // is in apps.h, because it should be inlined, for speed.
 //-----------------------------------------------------------------------------
-bool FpgaSetupSscDma(uint8_t *buf, int len)
-{
-       if (buf == NULL) {
-        return false;
-    }
-
+bool FpgaSetupSscDma(uint8_t *buf, int len) {
+       if (buf == NULL) return false;
+       
        AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;        // Disable DMA Transfer
        AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf;           // transfer to this memory address
        AT91C_BASE_PDC_SSC->PDC_RCR = len;                                      // transfer this many bytes
        AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf;          // next transfer to same memory address
        AT91C_BASE_PDC_SSC->PDC_RNCR = len;                                     // ... with same number of bytes
        AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;        // Disable DMA Transfer
        AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf;           // transfer to this memory address
        AT91C_BASE_PDC_SSC->PDC_RCR = len;                                      // transfer this many bytes
        AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf;          // next transfer to same memory address
        AT91C_BASE_PDC_SSC->PDC_RNCR = len;                                     // ... with same number of bytes
-       AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN;         // go!
-    
+       AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN;         // go!    
     return true;
 }
 
     return true;
 }
 
+
+//----------------------------------------------------------------------------
+// Uncompress (inflate) the FPGA data. Returns one decompressed byte with
+// each call. 
+//----------------------------------------------------------------------------
+static int get_from_fpga_combined_stream(z_streamp compressed_fpga_stream, uint8_t *output_buffer)
+{
+       if (fpga_image_ptr == compressed_fpga_stream->next_out) {       // need more data
+               compressed_fpga_stream->next_out = output_buffer;
+               compressed_fpga_stream->avail_out = OUTPUT_BUFFER_LEN;
+               fpga_image_ptr = output_buffer;
+               int res = inflate(compressed_fpga_stream, Z_SYNC_FLUSH);
+
+               if (res != Z_OK)
+                       Dbprintf("inflate returned: %d, %s", res, compressed_fpga_stream->msg);
+
+               if (res < 0)
+                       return res;
+       }
+
+       ++uncompressed_bytes_cnt;
+       
+       return *fpga_image_ptr++;
+}
+
+//----------------------------------------------------------------------------
+// Undo the interleaving of several FPGA config files. FPGA config files
+// are combined into one big file:
+// 288 bytes from FPGA file 1, followed by 288 bytes from FGPA file 2, etc.
+//----------------------------------------------------------------------------
+static int get_from_fpga_stream(int bitstream_version, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
+{
+       while((uncompressed_bytes_cnt / FPGA_INTERLEAVE_SIZE) % FPGA_BITSTREAM_MAX != (bitstream_version - 1)) {
+               // skip undesired data belonging to other bitstream_versions
+               get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer);
+       }
+
+       return get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer);    
+}
+
+
+static voidpf fpga_inflate_malloc(voidpf opaque, uInt items, uInt size)
+{
+       return BigBuf_malloc(items*size);
+}
+
+
+static void fpga_inflate_free(voidpf opaque, voidpf address)
+{
+       // free eventually allocated BigBuf memory
+       BigBuf_free(); BigBuf_Clear_ext(false);
+}
+
+
+//----------------------------------------------------------------------------
+// Initialize decompression of the respective (HF or LF) FPGA stream 
+//----------------------------------------------------------------------------
+static bool reset_fpga_stream(int bitstream_version, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
+{
+       uint8_t header[FPGA_BITSTREAM_FIXED_HEADER_SIZE];
+       
+       uncompressed_bytes_cnt = 0;
+       
+       // initialize z_stream structure for inflate:
+       compressed_fpga_stream->next_in = &_binary_obj_fpga_all_bit_z_start;
+       compressed_fpga_stream->avail_in = &_binary_obj_fpga_all_bit_z_start - &_binary_obj_fpga_all_bit_z_end;
+       compressed_fpga_stream->next_out = output_buffer;
+       compressed_fpga_stream->avail_out = OUTPUT_BUFFER_LEN;
+       compressed_fpga_stream->zalloc = &fpga_inflate_malloc;
+       compressed_fpga_stream->zfree = &fpga_inflate_free;
+
+       inflateInit2(compressed_fpga_stream, 0);
+
+       fpga_image_ptr = output_buffer;
+
+       for (uint16_t i = 0; i < FPGA_BITSTREAM_FIXED_HEADER_SIZE; i++)
+               header[i] = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
+       
+       // Check for a valid .bit file (starts with _bitparse_fixed_header)
+       if(memcmp(_bitparse_fixed_header, header, FPGA_BITSTREAM_FIXED_HEADER_SIZE) == 0)
+               return true;
+
+       return false;
+}
+
+
 static void DownloadFPGA_byte(unsigned char w)
 {
 #define SEND_BIT(x) { if(w & (1<<x) ) HIGH(GPIO_FPGA_DIN); else LOW(GPIO_FPGA_DIN); HIGH(GPIO_FPGA_CCLK); LOW(GPIO_FPGA_CCLK); }
 static void DownloadFPGA_byte(unsigned char w)
 {
 #define SEND_BIT(x) { if(w & (1<<x) ) HIGH(GPIO_FPGA_DIN); else LOW(GPIO_FPGA_DIN); HIGH(GPIO_FPGA_CCLK); LOW(GPIO_FPGA_CCLK); }
@@ -163,9 +266,8 @@ static void DownloadFPGA_byte(unsigned char w)
        SEND_BIT(0);
 }
 
        SEND_BIT(0);
 }
 
-// Download the fpga image starting at FpgaImage and with length FpgaImageLen bytes
-// If bytereversal is set: reverse the byte order in each 4-byte word
-static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int bytereversal)
+// Download the fpga image starting at current stream position with length FpgaImageLen bytes
+static void DownloadFPGA(int bitstream_version, int FpgaImageLen, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
 {
        int i=0;
 
 {
        int i=0;
 
@@ -218,23 +320,15 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers
                return;
        }
 
                return;
        }
 
-       if(bytereversal) {
-               /* This is only supported for uint32_t aligned images */
-               if( ((int)FpgaImage % sizeof(uint32_t)) == 0 ) {
-                       i=0;
-                       while(FpgaImageLen-->0)
-                               DownloadFPGA_byte(FpgaImage[(i++)^0x3]);
-                       /* Explanation of the magic in the above line:
-                        * i^0x3 inverts the lower two bits of the integer i, counting backwards
-                        * for each 4 byte increment. The generated sequence of (i++)^3 is
-                        * 3 2 1 0 7 6 5 4 11 10 9 8 15 14 13 12 etc. pp.
-                        */
+       for(i = 0; i < FpgaImageLen; i++) {
+               int b = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
+               if (b < 0) {
+                       Dbprintf("Error %d during FpgaDownload", b);
+                       break;
                }
                }
-       } else {
-               while(FpgaImageLen-->0)
-                       DownloadFPGA_byte(*FpgaImage++);
+               DownloadFPGA_byte(b);
        }
        }
-
+       
        // continue to clock FPGA until ready signal goes high
        i=100000;
        while ( (i--) && ( !(AT91C_BASE_PIOA->PIO_PDSR & GPIO_FPGA_DONE ) ) ) {
        // continue to clock FPGA until ready signal goes high
        i=100000;
        while ( (i--) && ( !(AT91C_BASE_PIOA->PIO_PDSR & GPIO_FPGA_DONE ) ) ) {
@@ -250,39 +344,21 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers
        LED_D_OFF();
 }
 
        LED_D_OFF();
 }
 
-static char *bitparse_headers_start;
-static char *bitparse_bitstream_end;
-static int bitparse_initialized = 0;
+
 /* Simple Xilinx .bit parser. The file starts with the fixed opaque byte sequence
  * 00 09 0f f0 0f f0 0f f0 0f f0 00 00 01
  * After that the format is 1 byte section type (ASCII character), 2 byte length
  * (big endian), <length> bytes content. Except for section 'e' which has 4 bytes
  * length.
  */
 /* Simple Xilinx .bit parser. The file starts with the fixed opaque byte sequence
  * 00 09 0f f0 0f f0 0f f0 0f f0 00 00 01
  * After that the format is 1 byte section type (ASCII character), 2 byte length
  * (big endian), <length> bytes content. Except for section 'e' which has 4 bytes
  * length.
  */
-static const char _bitparse_fixed_header[] = {0x00, 0x09, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x00, 0x00, 0x01};
-static int bitparse_init(void * start_address, void *end_address)
+static int bitparse_find_section(int bitstream_version, char section_name, unsigned int *section_length, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
 {
 {
-       bitparse_initialized = 0;
-
-       if(memcmp(_bitparse_fixed_header, start_address, sizeof(_bitparse_fixed_header)) != 0) {
-               return 0; /* Not matched */
-       } else {
-               bitparse_headers_start= ((char*)start_address) + sizeof(_bitparse_fixed_header);
-               bitparse_bitstream_end= (char*)end_address;
-               bitparse_initialized = 1;
-               return 1;
-       }
-}
-
-int bitparse_find_section(char section_name, char **section_start, unsigned int *section_length)
-{
-       char *pos = bitparse_headers_start;
        int result = 0;
        int result = 0;
-
-       if(!bitparse_initialized) return 0;
-
-       while(pos < bitparse_bitstream_end) {
-               char current_name = *pos++;
+       #define MAX_FPGA_BIT_STREAM_HEADER_SEARCH 100  // maximum number of bytes to search for the requested section
+       uint16_t numbytes = 0;
+       while(numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH) {
+               char current_name = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
+               numbytes++;
                unsigned int current_length = 0;
                if(current_name < 'a' || current_name > 'e') {
                        /* Strange section name, abort */
                unsigned int current_length = 0;
                if(current_name < 'a' || current_name > 'e') {
                        /* Strange section name, abort */
@@ -292,11 +368,13 @@ int bitparse_find_section(char section_name, char **section_start, unsigned int
                switch(current_name) {
                case 'e':
                        /* Four byte length field */
                switch(current_name) {
                case 'e':
                        /* Four byte length field */
-                       current_length += (*pos++) << 24;
-                       current_length += (*pos++) << 16;
+                       current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 24;
+                       current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 16;
+                       numbytes += 2;
                default: /* Fall through, two byte length field */
                default: /* Fall through, two byte length field */
-                       current_length += (*pos++) << 8;
-                       current_length += (*pos++) << 0;
+                       current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 8;
+                       current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 0;
+                       numbytes += 2;
                }
 
                if(current_name != 'e' && current_length > 255) {
                }
 
                if(current_name != 'e' && current_length > 255) {
@@ -306,111 +384,125 @@ int bitparse_find_section(char section_name, char **section_start, unsigned int
 
                if(current_name == section_name) {
                        /* Found it */
 
                if(current_name == section_name) {
                        /* Found it */
-                       *section_start = pos;
                        *section_length = current_length;
                        result = 1;
                        break;
                }
 
                        *section_length = current_length;
                        result = 1;
                        break;
                }
 
-               pos += current_length; /* Skip section */
+               for (uint16_t i = 0; i < current_length && numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH; i++) {
+                       get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
+                       numbytes++;
+               }
        }
 
        return result;
 }
 
        }
 
        return result;
 }
 
-//-----------------------------------------------------------------------------
-// Find out which FPGA image format is stored in flash, then call DownloadFPGA
-// with the right parameters to download the image
-//-----------------------------------------------------------------------------
-extern char _binary_fpga_lf_bit_start, _binary_fpga_lf_bit_end;
-extern char _binary_fpga_hf_bit_start, _binary_fpga_hf_bit_end;
+
+//----------------------------------------------------------------------------
+// Check which FPGA image is currently loaded (if any). If necessary 
+// decompress and load the correct (HF or LF) image to the FPGA
+//----------------------------------------------------------------------------
 void FpgaDownloadAndGo(int bitstream_version)
 {
 void FpgaDownloadAndGo(int bitstream_version)
 {
-       void *bit_start;
-       void *bit_end;
-
+       z_stream compressed_fpga_stream;
+       uint8_t output_buffer[OUTPUT_BUFFER_LEN] = {0x00};
+       
        // check whether or not the bitstream is already loaded
        // check whether or not the bitstream is already loaded
-       if (FpgaGatherBitstreamVersion() == bitstream_version)
+       if (downloaded_bitstream == bitstream_version)
                return;
 
                return;
 
-       if (bitstream_version == FPGA_BITSTREAM_LF) {
-               bit_start = &_binary_fpga_lf_bit_start;
-               bit_end = &_binary_fpga_lf_bit_end;
-       } else if (bitstream_version == FPGA_BITSTREAM_HF) {
-               bit_start = &_binary_fpga_hf_bit_start;
-               bit_end = &_binary_fpga_hf_bit_end;
-       } else
+       // make sure that we have enough memory to decompress
+       BigBuf_free(); BigBuf_Clear_ext(false);
+       
+       if (!reset_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer)) {
                return;
                return;
-       /* Check for the new flash image format: Should have the .bit file at &_binary_fpga_bit_start
-        */
-       if(bitparse_init(bit_start, bit_end)) {
-               /* Successfully initialized the .bit parser. Find the 'e' section and
-                * send its contents to the FPGA.
-                */
-               char *bitstream_start;
-               unsigned int bitstream_length;
-               if(bitparse_find_section('e', &bitstream_start, &bitstream_length)) {
-                       DownloadFPGA(bitstream_start, bitstream_length, 0);
-
-                       return; /* All done */
-               }
        }
 
        }
 
-       /* Fallback for the old flash image format: Check for the magic marker 0xFFFFFFFF
-        * 0xAA995566 at address 0x102000. This is raw bitstream with a size of 336,768 bits
-        * = 10,524 uint32_t, stored as uint32_t e.g. little-endian in memory, but each DWORD
-        * is still to be transmitted in MSBit first order. Set the invert flag to indicate
-        * that the DownloadFPGA function should invert every 4 byte sequence when doing
-        * the bytewise download.
-        */
-       if( *(uint32_t*)0x102000 == 0xFFFFFFFF && *(uint32_t*)0x102004 == 0xAA995566 )
-               DownloadFPGA((char*)0x102000, 10524*4, 1);
-}
+       unsigned int bitstream_length;
+       if(bitparse_find_section(bitstream_version, 'e', &bitstream_length, &compressed_fpga_stream, output_buffer)) {
+               DownloadFPGA(bitstream_version, bitstream_length, &compressed_fpga_stream, output_buffer);
+               downloaded_bitstream = bitstream_version;
+       }
+
+       inflateEnd(&compressed_fpga_stream);
+       
+       // free eventually allocated BigBuf memory
+       BigBuf_free(); BigBuf_Clear_ext(false);
+}      
 
 
-int FpgaGatherBitstreamVersion()
-{
-       char temp[256];
-       FpgaGatherVersion(temp, sizeof (temp));
-       if (!memcmp("LF", temp, 2))
-               return FPGA_BITSTREAM_LF;
-       else if (!memcmp("HF", temp, 2))
-               return FPGA_BITSTREAM_HF;
-       return FPGA_BITSTREAM_ERR;
-}
 
 
-void FpgaGatherVersion(char *dst, int len)
+//-----------------------------------------------------------------------------
+// Gather version information from FPGA image. Needs to decompress the begin 
+// of the respective (HF or LF) image.
+// Note: decompression makes use of (i.e. overwrites) BigBuf[]. It is therefore
+// advisable to call this only once and store the results for later use.
+//-----------------------------------------------------------------------------
+void FpgaGatherVersion(int bitstream_version, char *dst, int len)
 {
 {
-       char *fpga_info;
        unsigned int fpga_info_len;
        unsigned int fpga_info_len;
-       dst[0] = 0;
-       if(!bitparse_find_section('e', &fpga_info, &fpga_info_len)) {
-               strncat(dst, "FPGA image: legacy image without version information", len-1);
-       } else {
-               /* USB packets only have 48 bytes data payload, so be terse */
-               if(bitparse_find_section('a', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) {
-                       if (!memcmp("fpga_lf", fpga_info, 7))
-                               strncat(dst, "LF ", len-1);
-                       else if (!memcmp("fpga_hf", fpga_info, 7))
-                               strncat(dst, "HF ", len-1);
+       char tempstr[40] = {0x00};
+       z_stream compressed_fpga_stream;
+       uint8_t output_buffer[OUTPUT_BUFFER_LEN] = {0x00};
+       
+       dst[0] = '\0';
+
+       // ensure that we can allocate enough memory for decompression:
+       BigBuf_free(); BigBuf_Clear_ext(false);
+
+       if (!reset_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer))
+               return;
+
+       if(bitparse_find_section(bitstream_version, 'a', &fpga_info_len, &compressed_fpga_stream, output_buffer)) {
+               for (uint16_t i = 0; i < fpga_info_len; i++) {
+                       char c = (char)get_from_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer);
+                       if (i < sizeof(tempstr)) {
+                               tempstr[i] = c;
+                       }
                }
                }
-               strncat(dst, "FPGA image built", len-1);
-#if 0
-               if(bitparse_find_section('b', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) {
-                       strncat(dst, " for ", len-1);
-                       strncat(dst, fpga_info, len-1);
+               if (!memcmp("fpga_lf", tempstr, 7))
+                       strncat(dst, "LF ", len-1);
+               else if (!memcmp("fpga_hf", tempstr, 7))
+                       strncat(dst, "HF ", len-1);
+       }
+       strncat(dst, "FPGA image built", len-1);
+       if(bitparse_find_section(bitstream_version, 'b', &fpga_info_len, &compressed_fpga_stream, output_buffer)) {
+               strncat(dst, " for ", len-1);
+               for (uint16_t i = 0; i < fpga_info_len; i++) {
+                       char c = (char)get_from_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer);
+                       if (i < sizeof(tempstr)) {
+                               tempstr[i] = c;
+                       }
                }
                }
-#endif
-               if(bitparse_find_section('c', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) {
-                       strncat(dst, " on ", len-1);
-                       strncat(dst, fpga_info, len-1);
+               strncat(dst, tempstr, len-1);
+       }
+       if(bitparse_find_section(bitstream_version, 'c', &fpga_info_len, &compressed_fpga_stream, output_buffer)) {
+               strncat(dst, " on ", len-1);
+               for (uint16_t i = 0; i < fpga_info_len; i++) {
+                       char c = (char)get_from_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer);
+                       if (i < sizeof(tempstr)) {
+                               tempstr[i] = c;
+                       }
                }
                }
-               if(bitparse_find_section('d', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) {
-                       strncat(dst, " at ", len-1);
-                       strncat(dst, fpga_info, len-1);
+               strncat(dst, tempstr, len-1);
+       }
+       if(bitparse_find_section(bitstream_version, 'd', &fpga_info_len, &compressed_fpga_stream, output_buffer)) {
+               strncat(dst, " at ", len-1);
+               for (uint16_t i = 0; i < fpga_info_len; i++) {
+                       char c = (char)get_from_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer);
+                       if (i < sizeof(tempstr)) {
+                               tempstr[i] = c;
+                       }
                }
                }
+               strncat(dst, tempstr, len-1);
        }
        }
+       
+       strncat(dst, "\n", len-1);
+
+       inflateEnd(&compressed_fpga_stream);
 }
 
 }
 
+
 //-----------------------------------------------------------------------------
 // Send a 16 bit command/data pair to the FPGA.
 // The bit format is:  C3 C2 C1 C0 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
 //-----------------------------------------------------------------------------
 // Send a 16 bit command/data pair to the FPGA.
 // The bit format is:  C3 C2 C1 C0 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
@@ -458,3 +550,11 @@ void SetAdcMuxFor(uint32_t whichGpio)
 
        HIGH(whichGpio);
 }
 
        HIGH(whichGpio);
 }
+
+void Fpga_print_status(void)
+{
+       Dbprintf("Fgpa");
+       if(downloaded_bitstream == FPGA_BITSTREAM_HF) Dbprintf("  mode.............HF");
+       else if(downloaded_bitstream == FPGA_BITSTREAM_LF) Dbprintf("  mode.............LF");
+       else Dbprintf("  mode.............%d", downloaded_bitstream);
+}
Impressum, Datenschutz