PCF7931: Print found single/consecutive block(s), fixes to block 1 check

[proxmark3-svn] / CHANGELOG.md

diff --git a/CHANGELOG.md b/CHANGELOG.md
index 3b454f64f8c99b07cfc5780aa1b29f558e7082c0..5210edbc15f69bdfcd955dec3e68b35b11267f49 100644 (file)
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -2,41 +2,86 @@
 All notable changes to this project will be documented in this file.
 This project uses the changelog in accordance with [keepchangelog](http://keepachangelog.com/). Please use this to write notable changes, which is not the same as git commit log...
 
 All notable changes to this project will be documented in this file.
 This project uses the changelog in accordance with [keepchangelog](http://keepachangelog.com/). Please use this to write notable changes, which is not the same as git commit log...
 

-

 ## [unreleased][unreleased]
 
 ## [unreleased][unreleased]
 

+### Changed
+- Changed hf mfp security. Now it works in all the modes. (drHatson)
+- `hf fido` - show/check DER certificate and signatures (Merlok)
+- Changed `lf hitag reader 0x ... <firstPage> <tagmode>` - to select first page to read and tagmode (0=STANDARD, 1=ADVANCED, 2=FAST_ADVANCED)
+- Accept hitagS con0 tags with memory bits set to 11 and handle like 2048 tag
+
+### Fixed
+- AC-Mode decoding for HitagS
+- Wrong UID at HitagS simulation
+- `hf 15 sim` now works as expected (piwi)
+- `hf mf chk t` save to emulator memory now works as expected (mwalker)
+ - Fix `hf mf sim` - wrong access rights to write key B in trailer (@McEloff)
+ 
+### Added
+- Added to `hf 14a apdu` print apdu and compose apdu (@merlokk)
+- Added `hf 15 csetuid` - set UID on ISO-15693 Magic tags (t0m4)
+- Added `lf config s xxxx` option to allow skipping x samples before capture (marshmellow)
+- Added `lf em 4x05protect` to support changing protection blocks on em4x05 chips (marshmellow)
+- Support Standard Communication Mode in HITAG S
+- Added `hf emv scan` - commands for scan EMV card and dump data to json file (Merlok)
+- `hf mfp` group of commands (Merlok)
+- Added `hf fido` - FIDO U2F authenticator commands https://fidoalliance.org/ (Merlok)
+- Added `lf hitag reader 03` - read block (instead of pages) 
+- Added `lf hitag reader 04` - read block (instead of pages) 
+- Added `hf fido` `assert` and `make` commands from fido2 protocol (authenticatorMakeCredential and authenticatorGetAssertion) (Merlok)
+- Added `lf paradox clone` to clone a Paradox card
+- Added `emv` commands working for both contactless and smart cards (Merlok)
+- Added `hf 15 snoop` (piwi)
+- Added support for standard USB Smartcard Readers (piwi)
+- Added `hf plot` (piwi)
+- Added `hf mfp mad` `hf mf mad` parsing MAD1 and MAD2 (Merlok)
+- Added `hf mfp ndef` `hf mf ndef` parsing NDEF records (Merlok)
+- Added Mifare Mini, Mifare 2K and 4K support to `hf mf sim` (piwi)
+- Added Legic detection to `hf search` (dnet)
+- Added Home (Pos1) and End key bindings to the plot GUI (based on @mcd1992)
+- Added downlink reference mode option r <mode> [ 0 - (or missing) default/fixed bit, 1 - long leading, 2 - leading 0 and 3 - 1 of 4 ] to `lf t55xx detect`, `lf t55xx read`, `lf t55xx write`, and `lf t55xx bruteforce`
+- Added special option `r 4` to bruteforce, to try all downlink modes (0,1,2 and 3) for each password
+- `hf mfu info` now checks the NXP Originality Signature if availabe (piwi)
+
+
+## [v3.1.0][2018-10-10]
+

 ### Changed
 - Adjusted `lf cmdread` to respond to client when complete and the client will then automatically call `data samples`
 ### Changed
 - Adjusted `lf cmdread` to respond to client when complete and the client will then automatically call `data samples`

-- Improved backdoor detection missbehaving magic s50/1k tag (Fl0-0)
+- Improved backdoor detection misbehaving magic s50/1k tag (Fl0-0)

 - Deleted wipe functionality from `hf mf csetuid` (Merlok)
 - Changed `hf mf nested` logic (Merlok)
 - Added `hf mf nested` mode: autosearch keys for attack (from well known keys) (Merlok)
 - `hf mf nested` Check keys after they have found (Merlok)
 - `hf mf chk` Move main cycle to arm (Merlok)
 - Changed proxmark command line parameter `flush` to `-f` or `-flush` (Merlok)
 - Deleted wipe functionality from `hf mf csetuid` (Merlok)
 - Changed `hf mf nested` logic (Merlok)
 - Added `hf mf nested` mode: autosearch keys for attack (from well known keys) (Merlok)
 - `hf mf nested` Check keys after they have found (Merlok)
 - `hf mf chk` Move main cycle to arm (Merlok)
 - Changed proxmark command line parameter `flush` to `-f` or `-flush` (Merlok)

-- Changed `hf 14a reader` to just reqest-anticilission-select sequence (Merlok)
+- Changed `hf 14a reader` to just request-anticolission-select sequence (Merlok)

 - Changed `hf 14a raw` - works with LED's and some exchange logic (Merlok)
 - Changed TLV parser messages to more convenient (Merlok)
 - Rewritten Legic Prime reader (`hf legic reader`, `write` and `fill`) - it is using xcorrelation now (AntiCat)
 - Changed `hf 14a raw` - works with LED's and some exchange logic (Merlok)
 - Changed TLV parser messages to more convenient (Merlok)
 - Rewritten Legic Prime reader (`hf legic reader`, `write` and `fill`) - it is using xcorrelation now (AntiCat)

+- `hf 14a` commands works via argtable3 commandline parsing library (Merlok)

 - HID LF operations on firmware updated for complete native support of long (>37 bit) HID tags (grauerfuchs)
 - HID LF operations on firmware updated for complete native support of long (>37 bit) HID tags (grauerfuchs)

+- Changed Legic Prime tag simulator (`hf legic sim`) to run from 212 kHz SSP clock for better reliability (AntiCat)

 
 ### Fixed
 - Changed start sequence in Qt mode (fix: short commands hangs main Qt thread) (Merlok)
 - Changed driver file proxmark3.inf to support both old and new Product/Vendor IDs (piwi)
 
 ### Fixed
 - Changed start sequence in Qt mode (fix: short commands hangs main Qt thread) (Merlok)
 - Changed driver file proxmark3.inf to support both old and new Product/Vendor IDs (piwi)

+- Changed all command line parsers in `hf emv` commands to argtable (Merlok)
+- Implemented AppNap API, fixing #283 and #627 OSX USB comm issues (AntiCat)

 
 ### Added
 - Added `sc` smartcard (contact card) commands - reader, info, raw, upgrade, setclock, list (hardware version RDV4.0 only) must turn option on in makefile options (Willok, Iceman, marshmellow)
 - Added a bitbang mode to `lf cmdread` if delay is 0 the cmd bits turn off and on the antenna with 0 and 1 respectively (marshmellow)
 - Added PAC/Stanley detection to lf search (marshmellow)
 - Added lf pac demod and lf pac read - extracts the raw blocks from a PAC/Stanley tag (marshmellow)
 
 ### Added
 - Added `sc` smartcard (contact card) commands - reader, info, raw, upgrade, setclock, list (hardware version RDV4.0 only) must turn option on in makefile options (Willok, Iceman, marshmellow)
 - Added a bitbang mode to `lf cmdread` if delay is 0 the cmd bits turn off and on the antenna with 0 and 1 respectively (marshmellow)
 - Added PAC/Stanley detection to lf search (marshmellow)
 - Added lf pac demod and lf pac read - extracts the raw blocks from a PAC/Stanley tag (marshmellow)

-- Added hf mf c* commands compatibity for 4k and gen1b backdoor (Fl0-0)
+- Added hf mf c* commands compatibility for 4k and gen1b backdoor (Fl0-0)

 - Added backdoor detection for gen1b magic s70/4k tag (Fl0-0)
 - Added data fsktonrz, a fsk cleaning/demodulating routine for weak fsk signal. Note: follow this up with a `data rawdemod nr` to finish demoding your signal. (marshmellow)
 - Added lf em 410xbrute, LF EM410x reader bruteforce attack by simulating UIDs from a file (Fl0-0)
 - Added `hf mf cwipe` command. It wipes "magic Chinese" card. For 1a generation it uses card's "wipe" command. For gen1a and gen1b it uses a write command. (Merlok)
 - Added to `hf mf nested` source key check before attack (Merlok)
 - Added to `hf mf nested` after attack it checks all found keys on non-open sectors (Merlok)
 - Added backdoor detection for gen1b magic s70/4k tag (Fl0-0)
 - Added data fsktonrz, a fsk cleaning/demodulating routine for weak fsk signal. Note: follow this up with a `data rawdemod nr` to finish demoding your signal. (marshmellow)
 - Added lf em 410xbrute, LF EM410x reader bruteforce attack by simulating UIDs from a file (Fl0-0)
 - Added `hf mf cwipe` command. It wipes "magic Chinese" card. For 1a generation it uses card's "wipe" command. For gen1a and gen1b it uses a write command. (Merlok)
 - Added to `hf mf nested` source key check before attack (Merlok)
 - Added to `hf mf nested` after attack it checks all found keys on non-open sectors (Merlok)

-- `hf mf chk` Added setings to set iso14443a operations timeout. default timeout set to 500us (Merlok)
+- `hf mf chk` Added settings to set iso14443a operations timeout. default timeout set to 500us (Merlok)

 - Added to `hf mf nested` parameters `s` and `ss` for checking slow cards (Merlok)
 - Added to proxmark command line parameters `w` - wait 20s for serial port (Merlok)
 - Added to proxmark command line parameters `c` and `l` - execute command and lua script from command line (Merlok)
 - Added to `hf mf nested` parameters `s` and `ss` for checking slow cards (Merlok)
 - Added to proxmark command line parameters `w` - wait 20s for serial port (Merlok)
 - Added to proxmark command line parameters `c` and `l` - execute command and lua script from command line (Merlok)


@@ -53,6 +98,7 @@ This project uses the changelog in accordance with [keepchangelog](http://keepac
 - Added to `hf emv exec` SDA, DDA, fast DDA, CDA calculations for VISA and Mastercard and some other compatible EMV cards (Merlok)
 - Added `hf emv test` - crypto tests for DES, AES, SHA, RSA, SDA, DDA, CDA and some other crypto functions (Merlok)
 - Added `hf list mf` - deciphers crypto1 stream and works with first authentication and weak nested authentications (Merlok)
 - Added to `hf emv exec` SDA, DDA, fast DDA, CDA calculations for VISA and Mastercard and some other compatible EMV cards (Merlok)
 - Added `hf emv test` - crypto tests for DES, AES, SHA, RSA, SDA, DDA, CDA and some other crypto functions (Merlok)
 - Added `hf list mf` - deciphers crypto1 stream and works with first authentication and weak nested authentications (Merlok)

+- Added to `hf emv` commands: `gpo`, `readrec`, `genac`, `challenge`, `intauth` - commands working with EMV cards (Merlok)

 - Added `lf hid encode` and `lf hid decode` commands to translate printed HID card data to and from the packed data transmitted by a prox tag (grauerfuchs)
 - Added `lf hid write` command, which operates as a macro for encode followed by clone operations (grauerfuchs)
 
 - Added `lf hid encode` and `lf hid decode` commands to translate printed HID card data to and from the packed data transmitted by a prox tag (grauerfuchs)
 - Added `lf hid write` command, which operates as a macro for encode followed by clone operations (grauerfuchs)