#include "legicrf.h"
#include <hitag2.h>
-
+#include "lfsampling.h"
+#include "BigBuf.h"
#ifdef WITH_LCD
#include "LCD.h"
#endif
// is the order in which they go out on the wire.
//=============================================================================
-uint8_t ToSend[512];
+#define TOSEND_BUFFER_SIZE (9*MAX_FRAME_SIZE + 1 + 1 + 2) // 8 data bits and 1 parity bit per payload byte, 1 correction bit, 1 SOC bit, 2 EOC bits
+uint8_t ToSend[TOSEND_BUFFER_SIZE];
int ToSendMax;
static int ToSendBit;
struct common_area common_area __attribute__((section(".commonarea")));
-void BufferClear(void)
-{
- memset(BigBuf,0,sizeof(BigBuf));
- Dbprintf("Buffer cleared (%i bytes)",sizeof(BigBuf));
-}
-
void ToSendReset(void)
{
ToSendMax = -1;
ToSendBit++;
- if(ToSendBit >= sizeof(ToSend)) {
+ if(ToSendMax >= sizeof(ToSend)) {
ToSendBit = 0;
DbpString("ToSendStuffBit overflowed!");
}
{
byte_t len = strlen(str);
cmd_send(CMD_DEBUG_PRINT_STRING,len,0,0,(byte_t*)str,len);
-// /* this holds up stuff unless we're connected to usb */
-// if (!UsbConnected())
-// return;
-//
-// UsbCommand c;
-// c.cmd = CMD_DEBUG_PRINT_STRING;
-// c.arg[0] = strlen(str);
-// if(c.arg[0] > sizeof(c.d.asBytes)) {
-// c.arg[0] = sizeof(c.d.asBytes);
-// }
-// memcpy(c.d.asBytes, str, c.arg[0]);
-//
-// UsbSendPacket((uint8_t *)&c, sizeof(c));
-// // TODO fix USB so stupid things like this aren't req'd
-// SpinDelay(50);
}
#if 0
void DbpIntegers(int x1, int x2, int x3)
{
cmd_send(CMD_DEBUG_PRINT_INTEGERS,x1,x2,x3,0,0);
-// /* this holds up stuff unless we're connected to usb */
-// if (!UsbConnected())
-// return;
-//
-// UsbCommand c;
-// c.cmd = CMD_DEBUG_PRINT_INTEGERS;
-// c.arg[0] = x1;
-// c.arg[1] = x2;
-// c.arg[2] = x3;
-//
-// UsbSendPacket((uint8_t *)&c, sizeof(c));
-// // XXX
-// SpinDelay(50);
}
#endif
AT91C_BASE_ADC->ADC_CR = AT91C_ADC_SWRST;
AT91C_BASE_ADC->ADC_MR =
- ADC_MODE_PRESCALE(32) |
- ADC_MODE_STARTUP_TIME(16) |
- ADC_MODE_SAMPLE_HOLD_TIME(8);
+ ADC_MODE_PRESCALE(63 /* was 32 */) | // ADC_CLK = MCK / ((63+1) * 2) = 48MHz / 128 = 375kHz
+ ADC_MODE_STARTUP_TIME(1 /* was 16 */) | // Startup Time = (1+1) * 8 / ADC_CLK = 16 / 375kHz = 42,7us Note: must be > 20us
+ ADC_MODE_SAMPLE_HOLD_TIME(15 /* was 8 */); // Sample & Hold Time SHTIM = 15 / ADC_CLK = 15 / 375kHz = 40us
+
+ // Note: ADC_MODE_PRESCALE and ADC_MODE_SAMPLE_HOLD_TIME are set to the maximum allowed value.
+ // Both AMPL_LO and AMPL_HI are very high impedance (10MOhm) outputs, the input capacitance of the ADC is 12pF (typical). This results in a time constant
+ // of RC = 10MOhm * 12pF = 120us. Even after the maximum configurable sample&hold time of 40us the input capacitor will not be fully charged.
+ //
+ // The maths are:
+ // If there is a voltage v_in at the input, the voltage v_cap at the capacitor (this is what we are measuring) will be
+ //
+ // v_cap = v_in * (1 - exp(-RC/SHTIM)) = v_in * (1 - exp(-3)) = v_in * 0,95 (i.e. an error of 5%)
+ //
+ // Note: with the "historic" values in the comments above, the error was 34% !!!
+
AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ch);
AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
+
while(!(AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ch)))
;
d = AT91C_BASE_ADC->ADC_CDR[ch];
void MeasureAntennaTuning(void)
{
- uint8_t *dest = (uint8_t *)BigBuf+FREE_BUFFER_OFFSET;
+ uint8_t LF_Results[256];
int i, adcval = 0, peak = 0, peakv = 0, peakf = 0; //ptr = 0
int vLf125 = 0, vLf134 = 0, vHf = 0; // in mV
-// UsbCommand c;
-
- LED_B_ON();
- DbpString("Measuring antenna characteristics, please wait...");
- memset(dest,0,sizeof(FREE_BUFFER_SIZE));
+ LED_B_ON();
/*
* Sweeps the useful LF range of the proxmark from
* ( hopefully around 95 if it is tuned to 125kHz!)
*/
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
- for (i=255; i>19; i--) {
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+ for (i=255; i>=19; i--) {
WDT_HIT();
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);
SpinDelay(20);
- // Vref = 3.3V, and a 10000:240 voltage divider on the input
- // can measure voltages up to 137500 mV
- adcval = ((137500 * AvgAdc(ADC_CHAN_LF)) >> 10);
+ adcval = ((MAX_ADC_LF_VOLTAGE * AvgAdc(ADC_CHAN_LF)) >> 10);
if (i==95) vLf125 = adcval; // voltage at 125Khz
if (i==89) vLf134 = adcval; // voltage at 134Khz
- dest[i] = adcval>>8; // scale int to fit in byte for graphing purposes
- if(dest[i] > peak) {
+ LF_Results[i] = adcval>>8; // scale int to fit in byte for graphing purposes
+ if(LF_Results[i] > peak) {
peakv = adcval;
- peak = dest[i];
+ peak = LF_Results[i];
peakf = i;
//ptr = i;
}
}
- LED_A_ON();
+ for (i=18; i >= 0; i--) LF_Results[i] = 0;
+
+ LED_A_ON();
// Let the FPGA drive the high-frequency antenna around 13.56 MHz.
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
SpinDelay(20);
- // Vref = 3300mV, and an 10:1 voltage divider on the input
- // can measure voltages up to 33000 mV
- vHf = (33000 * AvgAdc(ADC_CHAN_HF)) >> 10;
-
-// c.cmd = CMD_MEASURED_ANTENNA_TUNING;
-// c.arg[0] = (vLf125 << 0) | (vLf134 << 16);
-// c.arg[1] = vHf;
-// c.arg[2] = peakf | (peakv << 16);
-
- DbpString("Measuring complete, sending report back to host");
- cmd_send(CMD_MEASURED_ANTENNA_TUNING,vLf125|(vLf134<<16),vHf,peakf|(peakv<<16),0,0);
-// UsbSendPacket((uint8_t *)&c, sizeof(c));
+ vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10;
+
+ cmd_send(CMD_MEASURED_ANTENNA_TUNING, vLf125 | (vLf134<<16), vHf, peakf | (peakv<<16), LF_Results, 256);
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- LED_A_OFF();
- LED_B_OFF();
- return;
+ LED_A_OFF();
+ LED_B_OFF();
+ return;
}
void MeasureAntennaTuningHf(void)
DbpString("Measuring HF antenna, press button to exit");
+ // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
+
for (;;) {
- // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
- FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
SpinDelay(20);
- // Vref = 3300mV, and an 10:1 voltage divider on the input
- // can measure voltages up to 33000 mV
- vHf = (33000 * AvgAdc(ADC_CHAN_HF)) >> 10;
+ vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10;
Dbprintf("%d mV",vHf);
if (BUTTON_PRESS()) break;
}
DbpString("cancelled");
+
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+
}
void SimulateTagHfListen(void)
{
- uint8_t *dest = (uint8_t *)BigBuf+FREE_BUFFER_OFFSET;
+ // ToDo: historically this used the free buffer, which was 2744 Bytes long.
+ // There might be a better size to be defined:
+ #define HF_14B_SNOOP_BUFFER_SIZE 2744
+ uint8_t *dest = BigBuf_malloc(HF_14B_SNOOP_BUFFER_SIZE);
uint8_t v = 0;
int i;
int p = 0;
// We're using this mode just so that I can test it out; the simulated
// tag mode would work just as well and be simpler.
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP);
// We need to listen to the high-frequency, peak-detected path.
p = 0;
i++;
- if(i >= FREE_BUFFER_SIZE) {
+ if(i >= HF_14B_SNOOP_BUFFER_SIZE) {
break;
}
}
extern char *_bootphase1_version_pointer, _flash_start, _flash_end;
void SendVersion(void)
{
- char temp[48]; /* Limited data payload in USB packets */
+ char temp[512]; /* Limited data payload in USB packets */
DbpString("Prox/RFID mark3 RFID instrument");
/* Try to find the bootrom version information. Expect to find a pointer at
void SamyRun()
{
DbpString("Stand-alone mode! No PC necessary.");
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
// 3 possible options? no just 2 for now
#define OPTS 2
int selected = 0;
int playing = 0;
+ int cardRead = 0;
// Turn on selected LED
LED(selected + 1, 0);
for (;;)
{
-// UsbPoll(FALSE);
usb_poll();
WDT_HIT();
SpinDelay(300);
// Button was held for a second, begin recording
- if (button_pressed > 0)
+ if (button_pressed > 0 && cardRead == 0)
{
LEDsoff();
LED(selected + 1, 0);
// If we were previously playing, set playing off
// so next button push begins playing what we recorded
playing = 0;
+
+ cardRead = 1;
+
+ }
+
+ else if (button_pressed > 0 && cardRead == 1)
+ {
+ LEDsoff();
+ LED(selected + 1, 0);
+ LED(LED_ORANGE, 0);
+
+ // record
+ Dbprintf("Cloning %x %x %x", selected, high[selected], low[selected]);
+
+ // wait for button to be released
+ while(BUTTON_PRESS())
+ WDT_HIT();
+
+ /* need this delay to prevent catching some weird data */
+ SpinDelay(500);
+
+ CopyHIDtoT55x7(high[selected], low[selected], 0, 0);
+ Dbprintf("Cloned %x %x %x", selected, high[selected], low[selected]);
+
+ LEDsoff();
+ LED(selected + 1, 0);
+ // Finished recording
+
+ // If we were previously playing, set playing off
+ // so next button push begins playing what we recorded
+ playing = 0;
+
+ cardRead = 0;
+
}
// Change where to record (or begin playing)
void ListenReaderField(int limit)
{
- int lf_av, lf_av_new, lf_baseline= 0, lf_count= 0, lf_max;
- int hf_av, hf_av_new, hf_baseline= 0, hf_count= 0, hf_max;
+ int lf_av, lf_av_new, lf_baseline= 0, lf_max;
+ int hf_av, hf_av_new, hf_baseline= 0, hf_max;
int mode=1, display_val, display_max, i;
-#define LF_ONLY 1
-#define HF_ONLY 2
+#define LF_ONLY 1
+#define HF_ONLY 2
+#define REPORT_CHANGE 10 // report new values only if they have changed at least by REPORT_CHANGE
+
+
+ // switch off FPGA - we don't want to measure our own signal
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
LEDsoff();
- lf_av=lf_max=ReadAdc(ADC_CHAN_LF);
+ lf_av = lf_max = AvgAdc(ADC_CHAN_LF);
if(limit != HF_ONLY) {
- Dbprintf("LF 125/134 Baseline: %d", lf_av);
+ Dbprintf("LF 125/134kHz Baseline: %dmV", (MAX_ADC_LF_VOLTAGE * lf_av) >> 10);
lf_baseline = lf_av;
}
- hf_av=hf_max=ReadAdc(ADC_CHAN_HF);
+ hf_av = hf_max = AvgAdc(ADC_CHAN_HF);
if (limit != LF_ONLY) {
- Dbprintf("HF 13.56 Baseline: %d", hf_av);
+ Dbprintf("HF 13.56MHz Baseline: %dmV", (MAX_ADC_HF_VOLTAGE * hf_av) >> 10);
hf_baseline = hf_av;
}
WDT_HIT();
if (limit != HF_ONLY) {
- if(mode==1) {
- if (abs(lf_av - lf_baseline) > 10) LED_D_ON();
- else LED_D_OFF();
+ if(mode == 1) {
+ if (abs(lf_av - lf_baseline) > REPORT_CHANGE)
+ LED_D_ON();
+ else
+ LED_D_OFF();
}
- ++lf_count;
- lf_av_new= ReadAdc(ADC_CHAN_LF);
+ lf_av_new = AvgAdc(ADC_CHAN_LF);
// see if there's a significant change
- if(abs(lf_av - lf_av_new) > 10) {
- Dbprintf("LF 125/134 Field Change: %x %x %x", lf_av, lf_av_new, lf_count);
+ if(abs(lf_av - lf_av_new) > REPORT_CHANGE) {
+ Dbprintf("LF 125/134kHz Field Change: %5dmV", (MAX_ADC_LF_VOLTAGE * lf_av_new) >> 10);
lf_av = lf_av_new;
if (lf_av > lf_max)
lf_max = lf_av;
- lf_count= 0;
}
}
if (limit != LF_ONLY) {
if (mode == 1){
- if (abs(hf_av - hf_baseline) > 10) LED_B_ON();
- else LED_B_OFF();
+ if (abs(hf_av - hf_baseline) > REPORT_CHANGE)
+ LED_B_ON();
+ else
+ LED_B_OFF();
}
- ++hf_count;
- hf_av_new= ReadAdc(ADC_CHAN_HF);
+ hf_av_new = AvgAdc(ADC_CHAN_HF);
// see if there's a significant change
- if(abs(hf_av - hf_av_new) > 10) {
- Dbprintf("HF 13.56 Field Change: %x %x %x", hf_av, hf_av_new, hf_count);
+ if(abs(hf_av - hf_av_new) > REPORT_CHANGE) {
+ Dbprintf("HF 13.56MHz Field Change: %5dmV", (MAX_ADC_HF_VOLTAGE * hf_av_new) >> 10);
hf_av = hf_av_new;
if (hf_av > hf_max)
hf_max = hf_av;
- hf_count= 0;
}
}
switch(c->cmd) {
#ifdef WITH_LF
+ case CMD_SET_LF_SAMPLING_CONFIG:
+ setSamplingConfig((sample_config *) c->d.asBytes);
+ break;
case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:
- AcquireRawAdcSamples125k(c->arg[0]);
- cmd_send(CMD_ACK,0,0,0,0,0);
+ cmd_send(CMD_ACK,SampleLF(c->arg[0]),0,0,0,0);
break;
case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:
ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
break;
+ case CMD_LF_SNOOP_RAW_ADC_SAMPLES:
+ cmd_send(CMD_ACK,SnoopLF(),0,0,0,0);
+ break;
case CMD_HID_DEMOD_FSK:
- CmdHIDdemodFSK(0, 0, 0, 1); // Demodulate HID tag
+ CmdHIDdemodFSK(c->arg[0], 0, 0, 1);
break;
case CMD_HID_SIM_TAG:
- CmdHIDsimTAG(c->arg[0], c->arg[1], 1); // Simulate HID tag by ID
+ CmdHIDsimTAG(c->arg[0], c->arg[1], 1);
+ break;
+ case CMD_FSK_SIM_TAG:
+ CmdFSKsimTAG(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+ break;
+ case CMD_ASK_SIM_TAG:
+ CmdASKsimTag(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+ break;
+ case CMD_PSK_SIM_TAG:
+ CmdPSKsimTag(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
- case CMD_HID_CLONE_TAG: // Clone HID tag by ID to T55x7
+ case CMD_HID_CLONE_TAG:
CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
break;
case CMD_IO_DEMOD_FSK:
- CmdIOdemodFSK(1, 0, 0, 1); // Demodulate IO tag
+ CmdIOdemodFSK(c->arg[0], 0, 0, 1);
break;
- case CMD_IO_CLONE_TAG: // Clone IO tag by ID to T55x7
+ case CMD_IO_CLONE_TAG:
CopyIOtoT55x7(c->arg[0], c->arg[1], c->d.asBytes[0]);
break;
+ case CMD_EM410X_DEMOD:
+ CmdEM410xdemod(c->arg[0], 0, 0, 1);
+ break;
case CMD_EM410X_WRITE_TAG:
WriteEM410x(c->arg[0], c->arg[1], c->arg[2]);
break;
case CMD_LF_SIMULATE_BIDIR:
SimulateTagLowFrequencyBidir(c->arg[0], c->arg[1]);
break;
- case CMD_INDALA_CLONE_TAG: // Clone Indala 64-bit tag by UID to T55x7
+ case CMD_INDALA_CLONE_TAG:
CopyIndala64toT55x7(c->arg[0], c->arg[1]);
break;
- case CMD_INDALA_CLONE_TAG_L: // Clone Indala 224-bit tag by UID to T55x7
+ case CMD_INDALA_CLONE_TAG_L:
CopyIndala224toT55x7(c->d.asDwords[0], c->d.asDwords[1], c->d.asDwords[2], c->d.asDwords[3], c->d.asDwords[4], c->d.asDwords[5], c->d.asDwords[6]);
break;
case CMD_T55XX_READ_BLOCK:
case CMD_T55XX_WRITE_BLOCK:
T55xxWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
break;
- case CMD_T55XX_READ_TRACE: // Clone HID tag by ID to T55x7
+ case CMD_T55XX_READ_TRACE:
T55xxReadTrace();
break;
- case CMD_PCF7931_READ: // Read PCF7931 tag
+ case CMD_PCF7931_READ:
ReadPCF7931();
cmd_send(CMD_ACK,0,0,0,0,0);
-// UsbSendPacket((uint8_t*)&ack, sizeof(ack));
break;
case CMD_EM4X_READ_WORD:
EM4xReadWord(c->arg[1], c->arg[2],c->d.asBytes[0]);
ReaderHitag((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes);
break;
#endif
-
+
#ifdef WITH_ISO15693
case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:
AcquireRawAdcSamplesIso15693();
ReaderIso15693(c->arg[0]);
break;
case CMD_SIMTAG_ISO_15693:
- SimTagIso15693(c->arg[0]);
+ SimTagIso15693(c->arg[0], c->d.asBytes);
break;
#endif
case CMD_SIMULATE_TAG_ISO_14443a:
SimulateIso14443aTag(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); // ## Simulate iso14443a tag - pass tag type & UID
break;
+
case CMD_EPA_PACE_COLLECT_NONCE:
EPA_PACE_Collect_Nonce(c);
break;
case CMD_READER_MIFARE:
- ReaderMifare(c->arg[0]);
+ ReaderMifare(c->arg[0]);
break;
case CMD_MIFARE_READBL:
MifareReadBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
case CMD_MIFAREU_READBL:
- MifareUReadBlock(c->arg[0],c->d.asBytes);
+ MifareUReadBlock(c->arg[0],c->arg[1], c->d.asBytes);
+ break;
+ case CMD_MIFAREUC_AUTH:
+ MifareUC_Auth(c->arg[0],c->d.asBytes);
break;
case CMD_MIFAREU_READCARD:
- MifareUReadCard(c->arg[0],c->d.asBytes);
- break;
+ MifareUReadCard(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+ break;
+ case CMD_MIFAREUC_SETPWD:
+ MifareUSetPwd(c->arg[0], c->d.asBytes);
+ break;
case CMD_MIFARE_READSC:
MifareReadSector(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
case CMD_MIFARE_WRITEBL:
MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
- case CMD_MIFAREU_WRITEBL_COMPAT:
- MifareUWriteBlock(c->arg[0], c->d.asBytes);
- break;
+ //case CMD_MIFAREU_WRITEBL_COMPAT:
+ //MifareUWriteBlockCompat(c->arg[0], c->d.asBytes);
+ //break;
case CMD_MIFAREU_WRITEBL:
- MifareUWriteBlock_Special(c->arg[0], c->d.asBytes);
- break;
+ MifareUWriteBlock(c->arg[0], c->arg[1], c->d.asBytes);
+ break;
case CMD_MIFARE_NESTED:
MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
break;
// Work with "magic Chinese" card
- case CMD_MIFARE_EML_CSETBLOCK:
+ case CMD_MIFARE_CSETBLOCK:
MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
- case CMD_MIFARE_EML_CGETBLOCK:
+ case CMD_MIFARE_CGETBLOCK:
MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
+ case CMD_MIFARE_CIDENT:
+ MifareCIdent();
+ break;
// mifare sniffer
case CMD_MIFARE_SNIFFER:
SniffMifare(c->arg[0]);
break;
+
#endif
#ifdef WITH_ICLASS
SnoopIClass();
break;
case CMD_SIMULATE_TAG_ICLASS:
- SimulateIClass(c->arg[0], c->d.asBytes);
+ SimulateIClass(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
case CMD_READER_ICLASS:
ReaderIClass(c->arg[0]);
case CMD_READER_ICLASS_REPLAY:
ReaderIClass_Replay(c->arg[0], c->d.asBytes);
break;
- case CMD_ICLASS_ISO14443A_GETPUBLIC:
- IClass_iso14443A_GetPublic(c->arg[0]);
- break;
+ case CMD_ICLASS_EML_MEMSET:
+ emlSet(c->d.asBytes,c->arg[0], c->arg[1]);
+ break;
#endif
case CMD_SIMULATE_TAG_HF_LISTEN:
break;
case CMD_BUFF_CLEAR:
- BufferClear();
+ BigBuf_Clear();
break;
case CMD_MEASURE_ANTENNA_TUNING:
break;
case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K:
-// UsbCommand n;
-// if(c->cmd == CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K) {
-// n.cmd = CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K;
-// } else {
-// n.cmd = CMD_DOWNLOADED_RAW_BITS_TI_TYPE;
-// }
-// n.arg[0] = c->arg[0];
- // memcpy(n.d.asBytes, BigBuf+c->arg[0], 48); // 12*sizeof(uint32_t)
- // LED_B_ON();
- // usb_write((uint8_t *)&n, sizeof(n));
- // UsbSendPacket((uint8_t *)&n, sizeof(n));
- // LED_B_OFF();
LED_B_ON();
+ uint8_t *BigBuf = BigBuf_get_addr();
for(size_t i=0; i<c->arg[1]; i += USB_CMD_DATA_SIZE) {
size_t len = MIN((c->arg[1] - i),USB_CMD_DATA_SIZE);
- cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K,i,len,0,((byte_t*)BigBuf)+c->arg[0]+i,len);
+ cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K,i,len,BigBuf_get_traceLen(),BigBuf+c->arg[0]+i,len);
}
// Trigger a finish downloading signal with an ACK frame
- cmd_send(CMD_ACK,0,0,0,0,0);
+ cmd_send(CMD_ACK,1,0,BigBuf_get_traceLen(),getSamplingConfig(),sizeof(sample_config));
LED_B_OFF();
break;
case CMD_DOWNLOADED_SIM_SAMPLES_125K: {
- uint8_t *b = (uint8_t *)BigBuf;
- memcpy(b+c->arg[0], c->d.asBytes, 48);
- //Dbprintf("copied 48 bytes to %i",b+c->arg[0]);
-// UsbSendPacket((uint8_t*)&ack, sizeof(ack));
+ uint8_t *b = BigBuf_get_addr();
+ memcpy(b+c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
cmd_send(CMD_ACK,0,0,0,0,0);
break;
}
break;
case CMD_SET_LF_DIVISOR:
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->arg[0]);
break;
case CMD_DEVICE_INFO: {
uint32_t dev_info = DEVICE_INFO_FLAG_OSIMAGE_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_OS;
if(common_area.flags.bootrom_present) dev_info |= DEVICE_INFO_FLAG_BOOTROM_PRESENT;
-// UsbSendPacket((uint8_t*)&c, sizeof(c));
cmd_send(CMD_DEVICE_INFO,dev_info,0,0,0,0);
break;
}
void __attribute__((noreturn)) AppMain(void)
{
SpinDelay(100);
-
+ clear_trace();
if(common_area.magic != COMMON_AREA_MAGIC || common_area.version != 1) {
/* Initialize common area */
memset(&common_area, 0, sizeof(common_area));
LED_B_OFF();
LED_A_OFF();
- // Init USB device`
+ // Init USB device
usb_enable();
-// UsbStart();
// The FPGA gets its clock from us from PCK0 output, so set that up.
AT91C_BASE_PIOA->PIO_BSR = GPIO_PCK0;
AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
// Load the FPGA image, which we have stored in our flash.
- FpgaDownloadAndGo();
+ // (the HF version by default)
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
StartTickCount();
UsbPacketReceived(rx,rx_len);
}
}
-// UsbPoll(FALSE);
-
WDT_HIT();
#ifdef WITH_LF
projects / proxmark3-svn / blobdiff