X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/0ec548dc2122f9bc0f0b536db5fa1a12f1f5c16a..1b12afbd9fd2f6b3de278a1419d0e095cb9181ce:/armsrc/legicrf.c?ds=sidebyside diff --git a/armsrc/legicrf.c b/armsrc/legicrf.c index d11436ec..1596c50c 100644 --- a/armsrc/legicrf.c +++ b/armsrc/legicrf.c @@ -8,14 +8,7 @@ // LEGIC RF simulation code //----------------------------------------------------------------------------- -#include "../include/proxmark3.h" -#include "apps.h" -#include "util.h" -#include "string.h" - #include "legicrf.h" -#include "../include/legic_prng.h" -#include "../common/crc.h" static struct legic_frame { int bits; @@ -37,11 +30,12 @@ static int legic_phase_drift; static int legic_frame_drift; static int legic_reqresp_drift; +int timestamp; + AT91PS_TC timer; AT91PS_TC prng_timer; -static void setup_timer(void) -{ +static void setup_timer(void) { /* Set up Timer 1 to use for measuring time between pulses. Since we're bit-banging * this it won't be terribly accurate but should be good enough. */ @@ -68,7 +62,7 @@ static void setup_timer(void) #define RWD_TIME_PAUSE 30 /* 20us */ #define RWD_TIME_FUZZ 20 /* rather generous 13us, since the peak detector + hysteresis fuzz quite a bit */ #define TAG_TIME_BIT 150 /* 100us for every bit */ -#define TAG_TIME_WAIT 490 /* time from RWD frame end to tag frame start, experimentally determined */ +#define TAG_TIME_WAIT 490 /* 490 time from RWD frame end to tag frame start, experimentally determined */ #define SIM_DIVISOR 586 /* prng_time/SIM_DIVISOR count prng needs to be forwared */ #define SIM_SHIFT 900 /* prng_time+SIM_SHIFT shift of delayed start */ @@ -78,41 +72,66 @@ static void setup_timer(void) #define FUZZ_EQUAL(value, target, fuzz) ((value) > ((target)-(fuzz)) && (value) < ((target)+(fuzz))) +// ~ 258us + 100us*delay +#define WAIT_387 WAIT(387) +#define WAIT(delay) while(timer->TC_CV < (delay) ); + + +// ToDo: define a meaningful maximum size for auth_table. The bigger this is, the lower will be the available memory for traces. +// Historically it used to be FREE_BUFFER_SIZE, which was 2744. +#define LEGIC_CARD_MEMSIZE 1024 +static uint8_t* cardmem; + +/* +The new tracelog.. + // Traceformat: + // 32 bits timestamp (little endian) + // 16 bits duration (little endian) + // 16 bits data length (little endian, Highest Bit used as readerToTag flag) + // y Bytes data + // x Bytes parity (one byte per 8 bytes data) +*/ + /* Generate Keystream */ static uint32_t get_key_stream(int skip, int count) { - uint32_t key=0; int i; - - /* Use int to enlarge timer tc to 32bit */ - legic_prng_bc += prng_timer->TC_CV; - prng_timer->TC_CCR = AT91C_TC_SWTRG; - - /* If skip == -1, forward prng time based */ - if(skip == -1) { - i = (legic_prng_bc+SIM_SHIFT)/SIM_DIVISOR; /* Calculate Cycles based on timer */ - i -= legic_prng_count(); /* substract cycles of finished frames */ - i -= count; /* substract current frame length, rewidn to bedinning */ - legic_prng_forward(i); - } else { - legic_prng_forward(skip); - } - - /* Write Time Data into LOG */ - uint8_t *BigBuf = BigBuf_get_addr(); - if(count == 6) { i = -1; } else { i = legic_read_count; } - BigBuf[OFFSET_LOG+128+i] = legic_prng_count(); - BigBuf[OFFSET_LOG+256+i*4] = (legic_prng_bc >> 0) & 0xff; - BigBuf[OFFSET_LOG+256+i*4+1] = (legic_prng_bc >> 8) & 0xff; - BigBuf[OFFSET_LOG+256+i*4+2] = (legic_prng_bc >>16) & 0xff; - BigBuf[OFFSET_LOG+256+i*4+3] = (legic_prng_bc >>24) & 0xff; - BigBuf[OFFSET_LOG+384+i] = count; - - /* Generate KeyStream */ - for(i=0; iTC_CV; + + // reset the prng timer. + prng_timer->TC_CCR = AT91C_TC_SWTRG; + while(prng_timer->TC_CV > 1) ; + + /* If skip == -1, forward prng time based */ + if(skip == -1) { + i = (legic_prng_bc + SIM_SHIFT)/SIM_DIVISOR; /* Calculate Cycles based on timer */ + i -= legic_prng_count(); /* substract cycles of finished frames */ + i -= count; /* substract current frame length, rewind to beginning */ + legic_prng_forward(i); + } else { + legic_prng_forward(skip); + } + + i = (count == 6) ? -1 : legic_read_count; + + /* Write Time Data into LOG */ + // uint8_t *BigBuf = BigBuf_get_addr(); + // BigBuf[OFFSET_LOG+128+i] = legic_prng_count(); + // BigBuf[OFFSET_LOG+256+i*4] = (legic_prng_bc >> 0) & 0xff; + // BigBuf[OFFSET_LOG+256+i*4+1] = (legic_prng_bc >> 8) & 0xff; + // BigBuf[OFFSET_LOG+256+i*4+2] = (legic_prng_bc >>16) & 0xff; + // BigBuf[OFFSET_LOG+256+i*4+3] = (legic_prng_bc >>24) & 0xff; + // BigBuf[OFFSET_LOG+384+i] = count; + + /* Generate KeyStream */ + for(i=0; i shift by 2 */ - int i; int key = 0; - for(i=0; iTC_CV < (TAG_TIME_WAIT - 30)) ; - - int i; - for(i=0; iTC_CV < (TAG_TIME_WAIT - 30)) ; + WAIT( TAG_TIME_WAIT - 30) + + uint8_t bit = 0; + for(int i = 0; i < bits; i++) { int nextbit = timer->TC_CV + TAG_TIME_BIT; - int bit = response & 1; - response = response >> 1; - if(bit) { + bit = response & 1; + response >>= 1; + + if (bit) AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; - } else { + else AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; - } - while(timer->TC_CV < nextbit) ; + + //while(timer->TC_CV < nextbit) ; + WAIT(nextbit) } AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; } +// Starts Clock and waits until its reset +static void ResetClock(void){ + timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + while(timer->TC_CV > 1) ; +} + /* Send a frame in reader mode, the FPGA must have been set up by * LegicRfReader */ -static void frame_send_rwd(uint32_t data, int bits) -{ - /* Start clock */ - timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; - while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ +static void frame_send_rwd(uint32_t data, uint8_t bits){ - int i; - for(i=0; iTC_CV; - int pause_end = starttime + RWD_TIME_PAUSE, bit_end; - int bit = data & 1; - data = data >> 1; + uint8_t bit = 0; + uint32_t starttime = 0, pause_end = 0, bit_end = 0, temp = data; + ResetClock(); + + for(int i = 0; i < bits; i++) { - if(bit ^ legic_prng_get_bit()) { + starttime = timer->TC_CV; + pause_end = starttime + RWD_TIME_PAUSE; + bit = temp & 1; + temp >>= 1; + + if(bit ^ legic_prng_get_bit()) bit_end = starttime + RWD_TIME_1; - } else { + else bit_end = starttime + RWD_TIME_0; - } - + /* RWD_TIME_PAUSE time off, then some time on, so that the complete bit time is * RWD_TIME_x, where x is the bit to be transmitted */ AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; - while(timer->TC_CV < pause_end) ; + + WAIT( pause_end ) + AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; - legic_prng_forward(1); /* bit duration is longest. use this time to forward the lfsr */ - while(timer->TC_CV < bit_end) ; - } + // bit duration is longest. use this time to forward the lfsr + legic_prng_forward(1); - { - /* One final pause to mark the end of the frame */ - int pause_end = timer->TC_CV + RWD_TIME_PAUSE; - AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; - while(timer->TC_CV < pause_end) ; - AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; + WAIT( bit_end ) } + // One final pause to mark the end of the frame + pause_end = timer->TC_CV + RWD_TIME_PAUSE; + + AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; + + WAIT(pause_end) + + AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; + + // log + uint8_t cmdbytes[2] = { (data & 0xFF), 0 }; + if ( bits > 8 ) { + cmdbytes[1] = (data >> 8 ) & 0xFF; + LogTrace(cmdbytes, 2, 0, timer->TC_CV, NULL, TRUE); + } else { + LogTrace(cmdbytes, 1, 0, timer->TC_CV, NULL, TRUE); + } /* Reset the timer, to measure time until the start of the tag frame */ - timer->TC_CCR = AT91C_TC_SWTRG; - while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ + ResetClock(); } /* Receive a frame from the card in reader emulation mode, the FPGA and @@ -223,14 +261,15 @@ static void frame_send_rwd(uint32_t data, int bits) */ static void frame_receive_rwd(struct legic_frame * const f, int bits, int crypt) { - uint32_t the_bit = 1; /* Use a bitmask to save on shifts */ - uint32_t data=0; - int i, old_level=0, edges=0; + uint32_t starttime = timer->TC_CV; + + uint32_t the_bit = 1; + uint32_t data = 0;/* Use a bitmask to save on shifts */ + int i, old_level = 0, edges = 0; int next_bit_at = TAG_TIME_WAIT; + int level = 0; - if(bits > 32) { - bits = 32; - } + if(bits > 32) bits = 32; AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; @@ -239,29 +278,30 @@ static void frame_receive_rwd(struct legic_frame * const f, int bits, int crypt) * since we cannot compute it on the fly while reading */ legic_prng_forward(2); - if(crypt) - { + if(crypt) { for(i=0; iTC_CV < next_bit_at) ; + // QUESTION: how long did those extra calls to logtrace take? + WAIT(next_bit_at) next_bit_at += TAG_TIME_BIT; for(i=0; iTC_CV < next_bit_at) { - int level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); + level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); if(level != old_level) edges++; old_level = level; } next_bit_at += TAG_TIME_BIT; - if(edges > 20 && edges < 60) { /* expected are 42 edges */ + // We expect 42 edges + if(edges > 20 && edges < 60) { data ^= the_bit; } the_bit <<= 1; @@ -269,48 +309,65 @@ static void frame_receive_rwd(struct legic_frame * const f, int bits, int crypt) f->data = data; f->bits = bits; - - /* Reset the timer, to synchronize the next frame */ - timer->TC_CCR = AT91C_TC_SWTRG; - while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ + + // log + uint8_t cmdbytes[] = { (data & 0xFF), (data >> 8) & 0xFF }; + LogTrace(cmdbytes, 2, starttime, timer->TC_CV, NULL, FALSE); + + // Reset the timer, to synchronize the next frame + ResetClock(); } -static void frame_append_bit(struct legic_frame * const f, int bit) -{ - if(f->bits >= 31) { - return; /* Overflow, won't happen */ - } - f->data |= (bit<bits); +static void frame_append_bit(struct legic_frame * const f, int bit) { + // Overflow, won't happen + if (f->bits >= 31) return; + + f->data |= (bit << f->bits); f->bits++; } -static void frame_clean(struct legic_frame * const f) -{ +static void frame_clean(struct legic_frame * const f) { f->data = 0; f->bits = 0; } -static uint32_t perform_setup_phase_rwd(int iv) -{ +// Setup pm3 as a Legic Reader +static uint32_t perform_setup_phase_rwd(uint8_t iv) { - /* Switch on carrier and let the tag charge for 1ms */ + // Switch on carrier and let the tag charge for 1ms AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; - SpinDelay(1); + SpinDelay(20); // was 1ms before. + + // no keystream yet + legic_prng_init(0); - legic_prng_init(0); /* no keystream yet */ frame_send_rwd(iv, 7); + legic_prng_init(iv); frame_clean(¤t_frame); + frame_receive_rwd(¤t_frame, 6, 1); - legic_prng_forward(1); /* we wait anyways */ - while(timer->TC_CV < 387) ; /* ~ 258us */ - frame_send_rwd(0x19, 6); + + // we wait anyways + legic_prng_forward(3); + + WAIT(387) + + // Send obsfuscated acknowledgment frame. + // 0x19 = MIM22 + // 0x39 = MIM256, MIM1024 + if ( current_frame.data == 0x0D ){ + frame_send_rwd(0x19, 6); + }else{ + frame_send_rwd(0x39, 6); + } return current_frame.data; } static void LegicCommonInit(void) { + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); SetAdcMuxFor(GPIO_MUXSEL_HIPKD); FpgaSetupSsc(); @@ -321,69 +378,87 @@ static void LegicCommonInit(void) { AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; + // reserve a cardmem, meaning we can use the tracelog function in bigbuff easier. + cardmem = BigBuf_malloc(LEGIC_CARD_MEMSIZE); + memset(cardmem, 0x00, LEGIC_CARD_MEMSIZE); + + clear_trace(); + set_tracing(TRUE); + setup_timer(); crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0); } -static void switch_off_tag_rwd(void) -{ - /* Switch off carrier, make sure tag is reset */ +/* Switch off carrier, make sure tag is reset */ +static void switch_off_tag_rwd(void) { AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; SpinDelay(10); - WDT_HIT(); } -/* calculate crc for a legic command */ -static int LegicCRC(int byte_index, int value, int cmd_sz) { + +// calculate crc4 for a legic READ command +// 5,8,10 address size. +static int LegicCRC(uint16_t byte_index, uint8_t value, uint8_t cmd_sz) { crc_clear(&legic_crc); - crc_update(&legic_crc, 1, 1); /* CMD_READ */ + crc_update(&legic_crc, LEGIC_READ, 1); crc_update(&legic_crc, byte_index, cmd_sz-1); crc_update(&legic_crc, value, 8); return crc_finish(&legic_crc); } +#define LEGIC_READ 0x01 +#define LEGIC_WRITE 0x00 + int legic_read_byte(int byte_index, int cmd_sz) { - int byte; - legic_prng_forward(4); /* we wait anyways */ - while(timer->TC_CV < 387) ; /* ~ 258us + 100us*delay */ + int calcCrc = 0, crc = 0; + uint8_t byte = 0; + uint32_t cmd = (byte_index << 1) | LEGIC_READ; + + WAIT_387 + + // send read command + frame_send_rwd(cmd, cmd_sz); - frame_send_rwd(1 | (byte_index << 1), cmd_sz); frame_clean(¤t_frame); + // receive frame_receive_rwd(¤t_frame, 12, 1); byte = current_frame.data & 0xff; - if( LegicCRC(byte_index, byte, cmd_sz) != (current_frame.data >> 8) ) { - Dbprintf("!!! crc mismatch: expected %x but got %x !!!", - LegicCRC(byte_index, current_frame.data & 0xff, cmd_sz), current_frame.data >> 8); + calcCrc = LegicCRC(byte_index, byte, cmd_sz); + crc = (current_frame.data >> 8); + + if( calcCrc != crc ) { + Dbprintf("!!! crc mismatch: expected %x but got %x !!!", calcCrc, crc); return -1; } + // we wait anyways + legic_prng_forward(4); return byte; } -/* legic_write_byte() is not included, however it's trivial to implement - * and here are some hints on what remains to be done: - * - * * assemble a write_cmd_frame with crc and send it - * * wait until the tag sends back an ACK ('1' bit unencrypted) - * * forward the prng based on the timing +/* + * - assemble a write_cmd_frame with crc and send it + * - wait until the tag sends back an ACK ('1' bit unencrypted) + * - forward the prng based on the timing */ +//int legic_write_byte(int byte, int addr, int addr_sz, int PrngCorrection) { int legic_write_byte(int byte, int addr, int addr_sz) { - //do not write UID, CRC, DCF - if(addr <= 0x06) { - return 0; - } - //== send write command ============================== + //do not write UID, CRC at offset 0-4. + if(addr <= 0x04) return 0; + + // crc crc_clear(&legic_crc); crc_update(&legic_crc, 0, 1); /* CMD_WRITE */ crc_update(&legic_crc, addr, addr_sz); crc_update(&legic_crc, byte, 8); - uint32_t crc = crc_finish(&legic_crc); + + // send write command uint32_t cmd = ((crc <<(addr_sz+1+8)) //CRC |(byte <<(addr_sz+1)) //Data |(addr <<1) //Address @@ -391,14 +466,22 @@ int legic_write_byte(int byte, int addr, int addr_sz) { uint32_t cmd_sz = addr_sz+1+8+4; //crc+data+cmd legic_prng_forward(2); /* we wait anyways */ + while(timer->TC_CV < 387) ; /* ~ 258us */ + frame_send_rwd(cmd, cmd_sz); + +// wllm-rbnt doesnt have these +// AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; +// AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; + + // wait for ack + int t, old_level = 0, edges = 0; + int next_bit_at = 0; - //== wait for ack ==================================== - int t, old_level=0, edges=0; - int next_bit_at =0; while(timer->TC_CV < 387) ; /* ~ 258us */ - for(t=0; t<80; t++) { + + for( t = 0; t < 80; t++) { edges = 0; next_bit_at += TAG_TIME_BIT; while(timer->TC_CV < next_bit_at) { @@ -410,101 +493,165 @@ int legic_write_byte(int byte, int addr, int addr_sz) { } if(edges > 20 && edges < 60) { /* expected are 42 edges */ int t = timer->TC_CV; - int c = t/TAG_TIME_BIT; - timer->TC_CCR = AT91C_TC_SWTRG; - while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ + int c = t / TAG_TIME_BIT; + + ResetClock(); legic_prng_forward(c); return 0; } } - timer->TC_CCR = AT91C_TC_SWTRG; - while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ + + ResetClock(); return -1; } -int LegicRfReader(int offset, int bytes) { - int byte_index=0, cmd_sz=0, card_sz=0; +int LegicRfReader(int offset, int bytes, int iv) { + + // ice_legic_setup(); + // ice_legic_select_card(); + // return 0; + int byte_index = 0, cmd_sz = 0, card_sz = 0; LegicCommonInit(); - uint8_t *BigBuf = BigBuf_get_addr(); - memset(BigBuf, 0, 1024); + if ( MF_DBGLEVEL >= 2) DbpString("setting up legic card"); + + uint32_t tag_type = perform_setup_phase_rwd(iv); + + //we lose to mutch time with dprintf + switch_off_tag_rwd(); - DbpString("setting up legic card"); - uint32_t tag_type = perform_setup_phase_rwd(SESSION_IV); - switch_off_tag_rwd(); //we lose to mutch time with dprintf switch(tag_type) { + case 0x0d: + if ( MF_DBGLEVEL >= 2) DbpString("MIM22 card found, reading card ..."); + cmd_sz = 6; + card_sz = 22; + break; case 0x1d: - DbpString("MIM 256 card found, reading card ..."); + if ( MF_DBGLEVEL >= 2) DbpString("MIM256 card found, reading card ..."); cmd_sz = 9; card_sz = 256; break; case 0x3d: - DbpString("MIM 1024 card found, reading card ..."); + if ( MF_DBGLEVEL >= 2) DbpString("MIM1024 card found, reading card ..."); cmd_sz = 11; card_sz = 1024; break; default: - Dbprintf("Unknown card format: %x",tag_type); + if ( MF_DBGLEVEL >= 1) Dbprintf("Unknown card format: %x",tag_type); return -1; } - if(bytes == -1) { + if(bytes == -1) bytes = card_sz; - } - if(bytes+offset >= card_sz) { - bytes = card_sz-offset; - } - perform_setup_phase_rwd(SESSION_IV); + if(bytes+offset >= card_sz) + bytes = card_sz - offset; + + perform_setup_phase_rwd(iv); + + legic_prng_forward(2); LED_B_ON(); while(byte_index < bytes) { int r = legic_read_byte(byte_index+offset, cmd_sz); - if(r == -1 ||BUTTON_PRESS()) { - DbpString("operation aborted"); - switch_off_tag_rwd(); - LED_B_OFF(); - LED_C_OFF(); - return -1; + if(r == -1 || BUTTON_PRESS()) { + switch_off_tag_rwd(); + LEDsoff(); + if ( MF_DBGLEVEL >= 2) DbpString("operation aborted"); + return -1; } - BigBuf[byte_index] = r; + cardmem[byte_index] = r; WDT_HIT(); - byte_index++; - if(byte_index & 0x10) LED_C_ON(); else LED_C_OFF(); + byte_index++; } - LED_B_OFF(); - LED_C_OFF(); + switch_off_tag_rwd(); - Dbprintf("Card read, use 'hf legic decode' or"); - Dbprintf("'data hexsamples %d' to view results", (bytes+7) & ~7); + LEDsoff(); + + if ( MF_DBGLEVEL >= 1) Dbprintf("Card read, use 'hf legic decode' or"); + if ( MF_DBGLEVEL >= 1) Dbprintf("'data hexsamples %d' to view results", (bytes+7) & ~7); return 0; } -void LegicRfWriter(int bytes, int offset) { - int byte_index=0, addr_sz=0; - uint8_t *BigBuf = BigBuf_get_addr(); +/*int _LegicRfWriter(int offset, int bytes, int addr_sz, uint8_t *BigBuf, int RoundBruteforceValue) { + int byte_index=0; + + LED_B_ON(); + perform_setup_phase_rwd(SESSION_IV); + //legic_prng_forward(2); + while(byte_index < bytes) { + int r; + + //check if the DCF should be changed + if ( (offset == 0x05) && (bytes == 0x02) ) { + //write DCF in reverse order (addr 0x06 before 0x05) + r = legic_write_byte(BigBuf[(0x06-byte_index)], (0x06-byte_index), addr_sz, RoundBruteforceValue); + //legic_prng_forward(1); + if(r == 0) { + byte_index++; + r = legic_write_byte(BigBuf[(0x06-byte_index)], (0x06-byte_index), addr_sz, RoundBruteforceValue); + } + //legic_prng_forward(1); + } + else { + r = legic_write_byte(BigBuf[byte_index+offset], byte_index+offset, addr_sz, RoundBruteforceValue); + } + if((r != 0) || BUTTON_PRESS()) { + Dbprintf("operation aborted @ 0x%03.3x", byte_index); + switch_off_tag_rwd(); + LED_B_OFF(); + LED_C_OFF(); + return -1; + } + + WDT_HIT(); + byte_index++; + if(byte_index & 0x10) LED_C_ON(); else LED_C_OFF(); + } + LED_B_OFF(); + LED_C_OFF(); + DbpString("write successful"); + return 0; +}*/ + +void LegicRfWriter(int offset, int bytes, int iv) { + + int byte_index = 0, addr_sz = 0; + + iv = (iv <=0 ) ? SESSION_IV : iv; LegicCommonInit(); - DbpString("setting up legic card"); - uint32_t tag_type = perform_setup_phase_rwd(SESSION_IV); + if ( MF_DBGLEVEL >= 2) DbpString("setting up legic card"); + + uint32_t tag_type = perform_setup_phase_rwd(iv); + switch_off_tag_rwd(); + switch(tag_type) { + case 0x0d: + if(offset+bytes > 22) { + Dbprintf("Error: can not write to 0x%03.3x on MIM22", offset+bytes); + return; + } + addr_sz = 5; + if ( MF_DBGLEVEL >= 2) Dbprintf("MIM22 card found, writing 0x%02.2x - 0x%02.2x ...", offset, offset+bytes); + break; case 0x1d: if(offset+bytes > 0x100) { - Dbprintf("Error: can not write to 0x%03.3x on MIM 256", offset+bytes); + Dbprintf("Error: can not write to 0x%03.3x on MIM256", offset+bytes); return; } addr_sz = 8; - Dbprintf("MIM 256 card found, writing 0x%02.2x - 0x%02.2x ...", offset, offset+bytes); + if ( MF_DBGLEVEL >= 2) Dbprintf("MIM256 card found, writing 0x%02.2x - 0x%02.2x ...", offset, offset+bytes); break; case 0x3d: if(offset+bytes > 0x400) { - Dbprintf("Error: can not write to 0x%03.3x on MIM 1024", offset+bytes); + Dbprintf("Error: can not write to 0x%03.3x on MIM1024", offset+bytes); return; } addr_sz = 10; - Dbprintf("MIM 1024 card found, writing 0x%03.3x - 0x%03.3x ...", offset, offset+bytes); + if ( MF_DBGLEVEL >= 2) Dbprintf("MIM1024 card found, writing 0x%03.3x - 0x%03.3x ...", offset, offset+bytes); break; default: Dbprintf("No or unknown card found, aborting"); @@ -512,38 +659,117 @@ void LegicRfWriter(int bytes, int offset) { } LED_B_ON(); - perform_setup_phase_rwd(SESSION_IV); - legic_prng_forward(2); + perform_setup_phase_rwd(iv); while(byte_index < bytes) { - int r = legic_write_byte(BigBuf[byte_index+offset], byte_index+offset, addr_sz); + int r; + + //check if the DCF should be changed + if ( ((byte_index+offset) == 0x05) && (bytes >= 0x02) ) { + //write DCF in reverse order (addr 0x06 before 0x05) + r = legic_write_byte(cardmem[(0x06-byte_index)], (0x06-byte_index), addr_sz); + + // write second byte on success... + if(r == 0) { + byte_index++; + r = legic_write_byte(cardmem[(0x06-byte_index)], (0x06-byte_index), addr_sz); + } + } + else { + r = legic_write_byte(cardmem[byte_index+offset], byte_index+offset, addr_sz); + } + if((r != 0) || BUTTON_PRESS()) { Dbprintf("operation aborted @ 0x%03.3x", byte_index); switch_off_tag_rwd(); - LED_B_OFF(); - LED_C_OFF(); + LEDsoff(); return; } + WDT_HIT(); byte_index++; - if(byte_index & 0x10) LED_C_ON(); else LED_C_OFF(); } - LED_B_OFF(); - LED_C_OFF(); - DbpString("write successful"); + LEDsoff(); + if ( MF_DBGLEVEL >= 1) DbpString("write successful"); } -int timestamp; +void LegicRfRawWriter(int address, int byte, int iv) { -/* Handle (whether to respond) a frame in tag mode */ + int byte_index = 0, addr_sz = 0; + + iv = (iv <= 0) ? SESSION_IV : iv; + + LegicCommonInit(); + + if ( MF_DBGLEVEL >= 2) DbpString("setting up legic card"); + + uint32_t tag_type = perform_setup_phase_rwd(iv); + + switch_off_tag_rwd(); + + switch(tag_type) { + case 0x0d: + if(address > 22) { + Dbprintf("Error: can not write to 0x%03.3x on MIM22", address); + return; + } + addr_sz = 5; + if ( MF_DBGLEVEL >= 2) Dbprintf("MIM22 card found, writing at addr 0x%02.2x - value 0x%02.2x ...", address, byte); + break; + case 0x1d: + if(address > 0x100) { + Dbprintf("Error: can not write to 0x%03.3x on MIM256", address); + return; + } + addr_sz = 8; + if ( MF_DBGLEVEL >= 2) Dbprintf("MIM256 card found, writing at addr 0x%02.2x - value 0x%02.2x ...", address, byte); + break; + case 0x3d: + if(address > 0x400) { + Dbprintf("Error: can not write to 0x%03.3x on MIM1024", address); + return; + } + addr_sz = 10; + if ( MF_DBGLEVEL >= 2) Dbprintf("MIM1024 card found, writing at addr 0x%03.3x - value 0x%03.3x ...", address, byte); + break; + default: + Dbprintf("No or unknown card found, aborting"); + return; + } + + Dbprintf("integer value: %d address: %d addr_sz: %d", byte, address, addr_sz); + LED_B_ON(); + + perform_setup_phase_rwd(iv); + //legic_prng_forward(2); + + int r = legic_write_byte(byte, address, addr_sz); + + if((r != 0) || BUTTON_PRESS()) { + Dbprintf("operation aborted @ 0x%03.3x (%1d)", byte_index, r); + switch_off_tag_rwd(); + LEDsoff(); + return; + } + + LEDsoff(); + if ( MF_DBGLEVEL >= 1) DbpString("write successful"); +} + +/* Handle (whether to respond) a frame in tag mode + * Only called when simulating a tag. + */ static void frame_handle_tag(struct legic_frame const * const f) { uint8_t *BigBuf = BigBuf_get_addr(); /* First Part of Handshake (IV) */ if(f->bits == 7) { - if(f->data == SESSION_IV) { + LED_C_ON(); - prng_timer->TC_CCR = AT91C_TC_SWTRG; + + prng_timer->TC_CCR = AT91C_TC_SWTRG; + while(prng_timer->TC_CV > 1) ; + legic_prng_init(f->data); frame_send_tag(0x3d, 6, 1); /* 0x3d^0x26 = 0x1b */ legic_state = STATE_IV; @@ -552,32 +778,31 @@ static void frame_handle_tag(struct legic_frame const * const f) legic_prng_iv = f->data; /* TIMEOUT */ - timer->TC_CCR = AT91C_TC_SWTRG; - while(timer->TC_CV > 1); - while(timer->TC_CV < 280); - return; - } else if((prng_timer->TC_CV % 50) > 40) { - legic_prng_init(f->data); - frame_send_tag(0x3d, 6, 1); - SpinDelay(20); + ResetClock(); + + //while(timer->TC_CV < 280); + WAIT(280) return; - } } /* 0x19==??? */ if(legic_state == STATE_IV) { - if((f->bits == 6) && (f->data == (0x19 ^ get_key_stream(1, 6)))) { + int local_key = get_key_stream(3, 6); + int xored = 0x39 ^ local_key; + if((f->bits == 6) && (f->data == xored)) { legic_state = STATE_CON; /* TIMEOUT */ - timer->TC_CCR = AT91C_TC_SWTRG; - while(timer->TC_CV > 1); - while(timer->TC_CV < 200); + ResetClock(); + + //while(timer->TC_CV < 200); + WAIT(200) + return; } else { legic_state = STATE_DISCON; LED_C_OFF(); - Dbprintf("0x19 - Frame: %03.3x", f->data); + Dbprintf("iv: %02x frame: %02x key: %02x xored: %02x", legic_prng_iv, f->data, local_key, xored); return; } } @@ -585,7 +810,7 @@ static void frame_handle_tag(struct legic_frame const * const f) /* Read */ if(f->bits == 11) { if(legic_state == STATE_CON) { - int key = get_key_stream(-1, 11); //legic_phase_drift, 11); + int key = get_key_stream(2, 11); //legic_phase_drift, 11); int addr = f->data ^ key; addr = addr >> 1; int data = BigBuf[addr]; int hash = LegicCRC(addr, data, 11) << 8; @@ -597,11 +822,13 @@ static void frame_handle_tag(struct legic_frame const * const f) frame_send_tag(hash | data, 12, 1); - /* SHORT TIMEOUT */ - timer->TC_CCR = AT91C_TC_SWTRG; - while(timer->TC_CV > 1); - legic_prng_forward(legic_frame_drift); - while(timer->TC_CV < 180); + /* TIMEOUT */ + ResetClock(); + + legic_prng_forward(2); + //while(timer->TC_CV < 180); + WAIT(180) + return; } } @@ -650,21 +877,25 @@ static void frame_handle_tag(struct legic_frame const * const f) /* Read bit by bit untill full frame is received * Call to process frame end answer */ -static void emit(int bit) -{ - if(bit == -1) { - if(current_frame.bits <= 4) { - frame_clean(¤t_frame); - } else { - frame_handle_tag(¤t_frame); - frame_clean(¤t_frame); - } - WDT_HIT(); - } else if(bit == 0) { - frame_append_bit(¤t_frame, 0); - } else if(bit == 1) { - frame_append_bit(¤t_frame, 1); - } +static void emit(int bit) { + + switch (bit) { + case 1: + frame_append_bit(¤t_frame, 1); + break; + case 0: + frame_append_bit(¤t_frame, 0); + break; + default: + if(current_frame.bits <= 4) { + frame_clean(¤t_frame); + } else { + frame_handle_tag(¤t_frame); + frame_clean(¤t_frame); + } + WDT_HIT(); + break; + } } void LegicRfSimulate(int phase, int frame, int reqresp) @@ -680,80 +911,822 @@ void LegicRfSimulate(int phase, int frame, int reqresp) * seems to be 300us-ish. */ - if(phase < 0) { - int i; - for(i=0; i<=reqresp; i++) { - legic_prng_init(SESSION_IV); - Dbprintf("i=%u, key 0x%3.3x", i, get_key_stream(i, frame)); - } - return; - } + legic_phase_drift = phase; + legic_frame_drift = frame; + legic_reqresp_drift = reqresp; - legic_phase_drift = phase; - legic_frame_drift = frame; - legic_reqresp_drift = reqresp; + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); + SetAdcMuxFor(GPIO_MUXSEL_HIPKD); + FpgaSetupSsc(); + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_212K); - FpgaDownloadAndGo(FPGA_BITSTREAM_HF); - SetAdcMuxFor(GPIO_MUXSEL_HIPKD); - FpgaSetupSsc(); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_212K); - - /* Bitbang the receiver */ - AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; - AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; - - setup_timer(); - crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0); + /* Bitbang the receiver */ + AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; + AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; + + setup_timer(); + crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0); + + int old_level = 0; + int active = 0; + legic_state = STATE_DISCON; + + LED_B_ON(); + DbpString("Starting Legic emulator, press button to end"); - int old_level = 0; - int active = 0; - legic_state = STATE_DISCON; - - LED_B_ON(); - DbpString("Starting Legic emulator, press button to end"); - while(!BUTTON_PRESS()) { - int level = !!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); - int time = timer->TC_CV; - - if(level != old_level) { - if(level == 1) { - timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; - if(FUZZ_EQUAL(time, RWD_TIME_1, RWD_TIME_FUZZ)) { - /* 1 bit */ - emit(1); - active = 1; - LED_A_ON(); - } else if(FUZZ_EQUAL(time, RWD_TIME_0, RWD_TIME_FUZZ)) { - /* 0 bit */ - emit(0); - active = 1; - LED_A_ON(); - } else if(active) { - /* invalid */ - emit(-1); - active = 0; - LED_A_OFF(); - } - } - } + while(!BUTTON_PRESS() && !usb_poll_validate_length()) { + int level = !!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); + int time = timer->TC_CV; + + if(level != old_level) { + if(level == 1) { + timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + + if (FUZZ_EQUAL(time, RWD_TIME_1, RWD_TIME_FUZZ)) { + /* 1 bit */ + emit(1); + active = 1; + LED_A_ON(); + } else if (FUZZ_EQUAL(time, RWD_TIME_0, RWD_TIME_FUZZ)) { + /* 0 bit */ + emit(0); + active = 1; + LED_A_ON(); + } else if (active) { + /* invalid */ + emit(-1); + active = 0; + LED_A_OFF(); + } + } + } - if(time >= (RWD_TIME_1+RWD_TIME_FUZZ) && active) { - /* Frame end */ - emit(-1); - active = 0; - LED_A_OFF(); - } - - if(time >= (20*RWD_TIME_1) && (timer->TC_SR & AT91C_TC_CLKSTA)) { - timer->TC_CCR = AT91C_TC_CLKDIS; - } - - old_level = level; - WDT_HIT(); - } - DbpString("Stopped"); - LED_B_OFF(); - LED_A_OFF(); - LED_C_OFF(); + /* Frame end */ + if(time >= (RWD_TIME_1+RWD_TIME_FUZZ) && active) { + emit(-1); + active = 0; + LED_A_OFF(); + } + + if(time >= (20*RWD_TIME_1) && (timer->TC_SR & AT91C_TC_CLKSTA)) { + timer->TC_CCR = AT91C_TC_CLKDIS; + } + + old_level = level; + WDT_HIT(); + } + if ( MF_DBGLEVEL >= 1) DbpString("Stopped"); + LEDsoff(); +} + +//----------------------------------------------------------------------------- +//----------------------------------------------------------------------------- + + +//----------------------------------------------------------------------------- +// Code up a string of octets at layer 2 (including CRC, we don't generate +// that here) so that they can be transmitted to the reader. Doesn't transmit +// them yet, just leaves them ready to send in ToSend[]. +//----------------------------------------------------------------------------- +// static void CodeLegicAsTag(const uint8_t *cmd, int len) +// { + // int i; + + // ToSendReset(); + + // // Transmit a burst of ones, as the initial thing that lets the + // // reader get phase sync. This (TR1) must be > 80/fs, per spec, + // // but tag that I've tried (a Paypass) exceeds that by a fair bit, + // // so I will too. + // for(i = 0; i < 20; i++) { + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // } + + // // Send SOF. + // for(i = 0; i < 10; i++) { + // ToSendStuffBit(0); + // ToSendStuffBit(0); + // ToSendStuffBit(0); + // ToSendStuffBit(0); + // } + // for(i = 0; i < 2; i++) { + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // } + + // for(i = 0; i < len; i++) { + // int j; + // uint8_t b = cmd[i]; + + // // Start bit + // ToSendStuffBit(0); + // ToSendStuffBit(0); + // ToSendStuffBit(0); + // ToSendStuffBit(0); + + // // Data bits + // for(j = 0; j < 8; j++) { + // if(b & 1) { + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // } else { + // ToSendStuffBit(0); + // ToSendStuffBit(0); + // ToSendStuffBit(0); + // ToSendStuffBit(0); + // } + // b >>= 1; + // } + + // // Stop bit + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // } + + // // Send EOF. + // for(i = 0; i < 10; i++) { + // ToSendStuffBit(0); + // ToSendStuffBit(0); + // ToSendStuffBit(0); + // ToSendStuffBit(0); + // } + // for(i = 0; i < 2; i++) { + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // ToSendStuffBit(1); + // } + + // // Convert from last byte pos to length + // ToSendMax++; +// } + +//----------------------------------------------------------------------------- +// The software UART that receives commands from the reader, and its state +// variables. +//----------------------------------------------------------------------------- +static struct { + enum { + STATE_UNSYNCD, + STATE_GOT_FALLING_EDGE_OF_SOF, + STATE_AWAITING_START_BIT, + STATE_RECEIVING_DATA + } state; + uint16_t shiftReg; + int bitCnt; + int byteCnt; + int byteCntMax; + int posCnt; + uint8_t *output; +} Uart; + +/* Receive & handle a bit coming from the reader. + * + * This function is called 4 times per bit (every 2 subcarrier cycles). + * Subcarrier frequency fs is 212kHz, 1/fs = 4,72us, i.e. function is called every 9,44us + * + * LED handling: + * LED A -> ON once we have received the SOF and are expecting the rest. + * LED A -> OFF once we have received EOF or are in error state or unsynced + * + * Returns: true if we received a EOF + * false if we are still waiting for some more + */ +// static RAMFUNC int HandleLegicUartBit(uint8_t bit) +// { + // switch(Uart.state) { + // case STATE_UNSYNCD: + // if(!bit) { + // // we went low, so this could be the beginning of an SOF + // Uart.state = STATE_GOT_FALLING_EDGE_OF_SOF; + // Uart.posCnt = 0; + // Uart.bitCnt = 0; + // } + // break; + + // case STATE_GOT_FALLING_EDGE_OF_SOF: + // Uart.posCnt++; + // if(Uart.posCnt == 2) { // sample every 4 1/fs in the middle of a bit + // if(bit) { + // if(Uart.bitCnt > 9) { + // // we've seen enough consecutive + // // zeros that it's a valid SOF + // Uart.posCnt = 0; + // Uart.byteCnt = 0; + // Uart.state = STATE_AWAITING_START_BIT; + // LED_A_ON(); // Indicate we got a valid SOF + // } else { + // // didn't stay down long enough + // // before going high, error + // Uart.state = STATE_UNSYNCD; + // } + // } else { + // // do nothing, keep waiting + // } + // Uart.bitCnt++; + // } + // if(Uart.posCnt >= 4) Uart.posCnt = 0; + // if(Uart.bitCnt > 12) { + // // Give up if we see too many zeros without + // // a one, too. + // LED_A_OFF(); + // Uart.state = STATE_UNSYNCD; + // } + // break; + + // case STATE_AWAITING_START_BIT: + // Uart.posCnt++; + // if(bit) { + // if(Uart.posCnt > 50/2) { // max 57us between characters = 49 1/fs, max 3 etus after low phase of SOF = 24 1/fs + // // stayed high for too long between + // // characters, error + // Uart.state = STATE_UNSYNCD; + // } + // } else { + // // falling edge, this starts the data byte + // Uart.posCnt = 0; + // Uart.bitCnt = 0; + // Uart.shiftReg = 0; + // Uart.state = STATE_RECEIVING_DATA; + // } + // break; + + // case STATE_RECEIVING_DATA: + // Uart.posCnt++; + // if(Uart.posCnt == 2) { + // // time to sample a bit + // Uart.shiftReg >>= 1; + // if(bit) { + // Uart.shiftReg |= 0x200; + // } + // Uart.bitCnt++; + // } + // if(Uart.posCnt >= 4) { + // Uart.posCnt = 0; + // } + // if(Uart.bitCnt == 10) { + // if((Uart.shiftReg & 0x200) && !(Uart.shiftReg & 0x001)) + // { + // // this is a data byte, with correct + // // start and stop bits + // Uart.output[Uart.byteCnt] = (Uart.shiftReg >> 1) & 0xff; + // Uart.byteCnt++; + + // if(Uart.byteCnt >= Uart.byteCntMax) { + // // Buffer overflowed, give up + // LED_A_OFF(); + // Uart.state = STATE_UNSYNCD; + // } else { + // // so get the next byte now + // Uart.posCnt = 0; + // Uart.state = STATE_AWAITING_START_BIT; + // } + // } else if (Uart.shiftReg == 0x000) { + // // this is an EOF byte + // LED_A_OFF(); // Finished receiving + // Uart.state = STATE_UNSYNCD; + // if (Uart.byteCnt != 0) { + // return TRUE; + // } + // } else { + // // this is an error + // LED_A_OFF(); + // Uart.state = STATE_UNSYNCD; + // } + // } + // break; + + // default: + // LED_A_OFF(); + // Uart.state = STATE_UNSYNCD; + // break; + // } + + // return FALSE; +// } + + +static void UartReset() { + Uart.byteCntMax = 3; + Uart.state = STATE_UNSYNCD; + Uart.byteCnt = 0; + Uart.bitCnt = 0; + Uart.posCnt = 0; + memset(Uart.output, 0x00, 3); +} + +// static void UartInit(uint8_t *data) { + // Uart.output = data; + // UartReset(); +// } + +//============================================================================= +// An LEGIC reader. We take layer two commands, code them +// appropriately, and then send them to the tag. We then listen for the +// tag's response, which we leave in the buffer to be demodulated on the +// PC side. +//============================================================================= + +static struct { + enum { + DEMOD_UNSYNCD, + DEMOD_PHASE_REF_TRAINING, + DEMOD_AWAITING_FALLING_EDGE_OF_SOF, + DEMOD_GOT_FALLING_EDGE_OF_SOF, + DEMOD_AWAITING_START_BIT, + DEMOD_RECEIVING_DATA + } state; + int bitCount; + int posCount; + int thisBit; + uint16_t shiftReg; + uint8_t *output; + int len; + int sumI; + int sumQ; +} Demod; + +/* + * Handles reception of a bit from the tag + * + * This function is called 2 times per bit (every 4 subcarrier cycles). + * Subcarrier frequency fs is 212kHz, 1/fs = 4,72us, i.e. function is called every 9,44us + * + * LED handling: + * LED C -> ON once we have received the SOF and are expecting the rest. + * LED C -> OFF once we have received EOF or are unsynced + * + * Returns: true if we received a EOF + * false if we are still waiting for some more + * + */ + + #ifndef SUBCARRIER_DETECT_THRESHOLD + # define SUBCARRIER_DETECT_THRESHOLD 8 + #endif + + // Subcarrier amplitude v = sqrt(ci^2 + cq^2), approximated here by max(abs(ci),abs(cq)) + 1/2*min(abs(ci),abs(cq))) +#ifndef CHECK_FOR_SUBCARRIER +# define CHECK_FOR_SUBCARRIER() { v = MAX(ai, aq) + MIN(halfci, halfcq); } +#endif + +// The soft decision on the bit uses an estimate of just the +// quadrant of the reference angle, not the exact angle. +// Subcarrier amplitude v = sqrt(ci^2 + cq^2), approximated here by max(abs(ci),abs(cq)) + 1/2*min(abs(ci),abs(cq))) +#define MAKE_SOFT_DECISION() { \ + if(Demod.sumI > 0) \ + v = ci; \ + else \ + v = -ci; \ + \ + if(Demod.sumQ > 0) \ + v += cq; \ + else \ + v -= cq; \ + \ + } + +static RAMFUNC int HandleLegicSamplesDemod(int ci, int cq) +{ + int v = 0; + int ai = ABS(ci); + int aq = ABS(cq); + int halfci = (ai >> 1); + int halfcq = (aq >> 1); + + switch(Demod.state) { + case DEMOD_UNSYNCD: + + CHECK_FOR_SUBCARRIER() + + if(v > SUBCARRIER_DETECT_THRESHOLD) { // subcarrier detected + Demod.state = DEMOD_PHASE_REF_TRAINING; + Demod.sumI = ci; + Demod.sumQ = cq; + Demod.posCount = 1; + } + break; + + case DEMOD_PHASE_REF_TRAINING: + if(Demod.posCount < 8) { + + CHECK_FOR_SUBCARRIER() + + if (v > SUBCARRIER_DETECT_THRESHOLD) { + // set the reference phase (will code a logic '1') by averaging over 32 1/fs. + // note: synchronization time > 80 1/fs + Demod.sumI += ci; + Demod.sumQ += cq; + ++Demod.posCount; + } else { + // subcarrier lost + Demod.state = DEMOD_UNSYNCD; + } + } else { + Demod.state = DEMOD_AWAITING_FALLING_EDGE_OF_SOF; + } + break; + + case DEMOD_AWAITING_FALLING_EDGE_OF_SOF: + + MAKE_SOFT_DECISION() + + //Dbprintf("ICE: %d %d %d %d %d", v, Demod.sumI, Demod.sumQ, ci, cq ); + // logic '0' detected + if (v <= 0) { + + Demod.state = DEMOD_GOT_FALLING_EDGE_OF_SOF; + + // start of SOF sequence + Demod.posCount = 0; + } else { + // maximum length of TR1 = 200 1/fs + if(Demod.posCount > 25*2) Demod.state = DEMOD_UNSYNCD; + } + ++Demod.posCount; + break; + + case DEMOD_GOT_FALLING_EDGE_OF_SOF: + ++Demod.posCount; + + MAKE_SOFT_DECISION() + + if(v > 0) { + // low phase of SOF too short (< 9 etu). Note: spec is >= 10, but FPGA tends to "smear" edges + if(Demod.posCount < 10*2) { + Demod.state = DEMOD_UNSYNCD; + } else { + LED_C_ON(); // Got SOF + Demod.state = DEMOD_AWAITING_START_BIT; + Demod.posCount = 0; + Demod.len = 0; + } + } else { + // low phase of SOF too long (> 12 etu) + if(Demod.posCount > 13*2) { + Demod.state = DEMOD_UNSYNCD; + LED_C_OFF(); + } + } + break; + + case DEMOD_AWAITING_START_BIT: + ++Demod.posCount; + + MAKE_SOFT_DECISION() + + if(v > 0) { + // max 19us between characters = 16 1/fs, max 3 etu after low phase of SOF = 24 1/fs + if(Demod.posCount > 3*2) { + Demod.state = DEMOD_UNSYNCD; + LED_C_OFF(); + } + } else { + // start bit detected + Demod.bitCount = 0; + Demod.posCount = 1; // this was the first half + Demod.thisBit = v; + Demod.shiftReg = 0; + Demod.state = DEMOD_RECEIVING_DATA; + } + break; + + case DEMOD_RECEIVING_DATA: + + MAKE_SOFT_DECISION() + + if(Demod.posCount == 0) { + // first half of bit + Demod.thisBit = v; + Demod.posCount = 1; + } else { + // second half of bit + Demod.thisBit += v; + Demod.shiftReg >>= 1; + // logic '1' + if(Demod.thisBit > 0) + Demod.shiftReg |= 0x200; + + ++Demod.bitCount; + + if(Demod.bitCount == 10) { + + uint16_t s = Demod.shiftReg; + + if((s & 0x200) && !(s & 0x001)) { + // stop bit == '1', start bit == '0' + uint8_t b = (s >> 1); + Demod.output[Demod.len] = b; + ++Demod.len; + Demod.state = DEMOD_AWAITING_START_BIT; + } else { + Demod.state = DEMOD_UNSYNCD; + LED_C_OFF(); + + if(s == 0x000) { + // This is EOF (start, stop and all data bits == '0' + return TRUE; + } + } + } + Demod.posCount = 0; + } + break; + + default: + Demod.state = DEMOD_UNSYNCD; + LED_C_OFF(); + break; + } + return FALSE; +} + +// Clear out the state of the "UART" that receives from the tag. +static void DemodReset() { + Demod.len = 0; + Demod.state = DEMOD_UNSYNCD; + Demod.posCount = 0; + Demod.sumI = 0; + Demod.sumQ = 0; + Demod.bitCount = 0; + Demod.thisBit = 0; + Demod.shiftReg = 0; + memset(Demod.output, 0x00, 3); +} + +static void DemodInit(uint8_t *data) { + Demod.output = data; + DemodReset(); } +/* + * Demodulate the samples we received from the tag, also log to tracebuffer + * quiet: set to 'TRUE' to disable debug output + */ + #define LEGIC_DMA_BUFFER_SIZE 256 +static void GetSamplesForLegicDemod(int n, bool quiet) +{ + int max = 0; + bool gotFrame = FALSE; + int lastRxCounter = LEGIC_DMA_BUFFER_SIZE; + int ci, cq, samples = 0; + + BigBuf_free(); + + // And put the FPGA in the appropriate mode + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_QUARTER_FREQ); + + // The response (tag -> reader) that we're receiving. + // Set up the demodulator for tag -> reader responses. + DemodInit(BigBuf_malloc(MAX_FRAME_SIZE)); + + // The DMA buffer, used to stream samples from the FPGA + int8_t *dmaBuf = (int8_t*) BigBuf_malloc(LEGIC_DMA_BUFFER_SIZE); + int8_t *upTo = dmaBuf; + + // Setup and start DMA. + if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, LEGIC_DMA_BUFFER_SIZE) ){ + if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting"); + return; + } + + // Signal field is ON with the appropriate LED: + LED_D_ON(); + for(;;) { + int behindBy = lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR; + if(behindBy > max) max = behindBy; + + while(((lastRxCounter-AT91C_BASE_PDC_SSC->PDC_RCR) & (LEGIC_DMA_BUFFER_SIZE-1)) > 2) { + ci = upTo[0]; + cq = upTo[1]; + upTo += 2; + if(upTo >= dmaBuf + LEGIC_DMA_BUFFER_SIZE) { + upTo = dmaBuf; + AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) upTo; + AT91C_BASE_PDC_SSC->PDC_RNCR = LEGIC_DMA_BUFFER_SIZE; + } + lastRxCounter -= 2; + if(lastRxCounter <= 0) + lastRxCounter = LEGIC_DMA_BUFFER_SIZE; + + samples += 2; + + gotFrame = HandleLegicSamplesDemod(ci , cq ); + if ( gotFrame ) + break; + } + + if(samples > n || gotFrame) + break; + } + + FpgaDisableSscDma(); + + if (!quiet && Demod.len == 0) { + Dbprintf("max behindby = %d, samples = %d, gotFrame = %d, Demod.len = %d, Demod.sumI = %d, Demod.sumQ = %d", + max, + samples, + gotFrame, + Demod.len, + Demod.sumI, + Demod.sumQ + ); + } + + //Tracing + if (Demod.len > 0) { + uint8_t parity[MAX_PARITY_SIZE] = {0x00}; + LogTrace(Demod.output, Demod.len, 0, 0, parity, FALSE); + } +} +//----------------------------------------------------------------------------- +// Transmit the command (to the tag) that was placed in ToSend[]. +//----------------------------------------------------------------------------- +static void TransmitForLegic(void) +{ + int c; + + FpgaSetupSsc(); + + while(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) + AT91C_BASE_SSC->SSC_THR = 0xff; + + // Signal field is ON with the appropriate Red LED + LED_D_ON(); + + // Signal we are transmitting with the Green LED + LED_B_ON(); + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX | FPGA_HF_READER_TX_SHALLOW_MOD); + + for(c = 0; c < 10;) { + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = 0xff; + c++; + } + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { + volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR; + (void)r; + } + WDT_HIT(); + } + + c = 0; + for(;;) { + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = ToSend[c]; + legic_prng_forward(1); // forward the lfsr + c++; + if(c >= ToSendMax) { + break; + } + } + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { + volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR; + (void)r; + } + WDT_HIT(); + } + LED_B_OFF(); +} + + +//----------------------------------------------------------------------------- +// Code a layer 2 command (string of octets, including CRC) into ToSend[], +// so that it is ready to transmit to the tag using TransmitForLegic(). +//----------------------------------------------------------------------------- +static void CodeLegicBitsAsReader(const uint8_t *cmd, uint8_t cmdlen, int bits) +{ + int i, j; + uint8_t b; + + ToSendReset(); + + // Send SOF + for(i = 0; i < 7; i++) + ToSendStuffBit(1); + + + for(i = 0; i < cmdlen; i++) { + // Start bit + ToSendStuffBit(0); + + // Data bits + b = cmd[i]; + for(j = 0; j < bits; j++) { + if(b & 1) { + ToSendStuffBit(1); + } else { + ToSendStuffBit(0); + } + b >>= 1; + } + } + + // Convert from last character reference to length + ++ToSendMax; +} + +/** + Convenience function to encode, transmit and trace Legic comms + **/ +static void CodeAndTransmitLegicAsReader(const uint8_t *cmd, uint8_t cmdlen, int bits) +{ + CodeLegicBitsAsReader(cmd, cmdlen, bits); + TransmitForLegic(); + if (tracing) { + uint8_t parity[1] = {0x00}; + LogTrace(cmd, cmdlen, 0, 0, parity, TRUE); + } +} + +int ice_legic_select_card() +{ + //int cmd_size=0, card_size=0; + uint8_t wakeup[] = { 0x7F }; + uint8_t getid[] = {0x19}; + + legic_prng_init(SESSION_IV); + + // first, wake up the tag, 7bits + CodeAndTransmitLegicAsReader(wakeup, sizeof(wakeup), 7); + + GetSamplesForLegicDemod(1000, TRUE); + + // frame_clean(¤t_frame); + //frame_receive_rwd(¤t_frame, 6, 1); + + legic_prng_forward(1); /* we wait anyways */ + + //while(timer->TC_CV < 387) ; /* ~ 258us */ + //frame_send_rwd(0x19, 6); + CodeAndTransmitLegicAsReader(getid, sizeof(getid), 8); + GetSamplesForLegicDemod(1000, TRUE); + + //if (Demod.len < 14) return 2; + Dbprintf("CARD TYPE: %02x LEN: %d", Demod.output[0], Demod.len); + + switch(Demod.output[0]) { + case 0x1d: + DbpString("MIM 256 card found"); + // cmd_size = 9; + // card_size = 256; + break; + case 0x3d: + DbpString("MIM 1024 card found"); + // cmd_size = 11; + // card_size = 1024; + break; + default: + return -1; + } + + // if(bytes == -1) + // bytes = card_size; + + // if(bytes + offset >= card_size) + // bytes = card_size - offset; + + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + set_tracing(FALSE); + return 1; +} + +// Set up LEGIC communication +void ice_legic_setup() { + + // standard things. + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); + BigBuf_free(); BigBuf_Clear_ext(false); + clear_trace(); + set_tracing(TRUE); + DemodReset(); + UartReset(); + + // Set up the synchronous serial port + FpgaSetupSsc(); + + // connect Demodulated Signal to ADC: + SetAdcMuxFor(GPIO_MUXSEL_HIPKD); + + // Signal field is on with the appropriate LED + LED_D_ON(); + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX | FPGA_HF_READER_TX_SHALLOW_MOD); + SpinDelay(20); + // Start the timer + //StartCountSspClk(); + + // initalize CRC + crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0); + + // initalize prng + legic_prng_init(0); +} \ No newline at end of file