X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/0fa9ca5b53e412decad0df1f6b5baca73ae76a9c..6c5ad038603d132d10802eecbef5c2f2547d94ae:/armsrc/lfops.c?ds=inline diff --git a/armsrc/lfops.c b/armsrc/lfops.c index 8ad25ce0..c2d908df 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -42,12 +42,12 @@ void DoAcquisition125k(BOOL at134khz) memset(dest,0,n); i = 0; for(;;) { - if(SSC_STATUS & (SSC_STATUS_TX_READY)) { - SSC_TRANSMIT_HOLDING = 0x43; + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = 0x43; LED_D_ON(); } - if(SSC_STATUS & (SSC_STATUS_RX_READY)) { - dest[i] = (BYTE)SSC_RECEIVE_HOLDING; + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { + dest[i] = (BYTE)AT91C_BASE_SSC->SSC_RHR; i++; LED_D_OFF(); if(i >= n) { @@ -274,17 +274,17 @@ void WriteTIbyte(BYTE b) { if (b&(1<PIO_PDR = GPIO_SSC_DIN; + AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN; // steal this pin from the SSP and use it to control the modulation - PIO_ENABLE = (1<PIO_PER = GPIO_SSC_DOUT; + AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; - SSC_CONTROL = SSC_CONTROL_RESET; - SSC_CONTROL = SSC_CONTROL_RX_ENABLE | SSC_CONTROL_TX_ENABLE; + AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST; + AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN; - // Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long - // 48/2 = 24 MHz clock must be divided by 12 - SSC_CLOCK_DIVISOR = 12; + // Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long + // 48/2 = 24 MHz clock must be divided by 12 + AT91C_BASE_SSC->SSC_CMR = 12; - SSC_RECEIVE_CLOCK_MODE = SSC_CLOCK_MODE_SELECT(0); - SSC_RECEIVE_FRAME_MODE = SSC_FRAME_MODE_BITS_IN_WORD(32) | SSC_FRAME_MODE_MSB_FIRST; - SSC_TRANSMIT_CLOCK_MODE = 0; - SSC_TRANSMIT_FRAME_MODE = 0; + AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(0); + AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(32) | AT91C_SSC_MSBF; + AT91C_BASE_SSC->SSC_TCMR = 0; + AT91C_BASE_SSC->SSC_TFMR = 0; LED_D_ON(); // modulate antenna - PIO_OUTPUT_DATA_SET = (1<= TIBUFLEN) break; - } - WDT_HIT(); + if(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { + BigBuf[i] = AT91C_BASE_SSC->SSC_RHR; // store 32 bit values in buffer + i++; if(i >= TIBUFLEN) break; + } + WDT_HIT(); } // return stolen pin to SSP - PIO_DISABLE = (1<PIO_PDR = GPIO_SSC_DOUT; + AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN | GPIO_SSC_DOUT; char *dest = (char *)BigBuf; n = TIBUFLEN*32; @@ -394,8 +394,8 @@ void WriteTItag(DWORD idhi, DWORD idlo, WORD crc) LED_A_ON(); // steal this pin from the SSP and use it to control the modulation - PIO_ENABLE = (1<PIO_PER = GPIO_SSC_DOUT; + AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; // writing algorithm: // a high bit consists of a field off for 1ms and field on for 1ms @@ -408,7 +408,7 @@ void WriteTItag(DWORD idhi, DWORD idlo, WORD crc) // finish with 15ms programming time // modulate antenna - PIO_OUTPUT_DATA_SET = (1<>8 )&0xff ); // crc hi WriteTIbyte(0x00); // write frame lo WriteTIbyte(0x03); // write frame hi - PIO_OUTPUT_DATA_SET = (1<PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK; - PIO_OUTPUT_ENABLE = (1 << GPIO_SSC_DOUT); - PIO_OUTPUT_DISABLE = (1 << GPIO_SSC_CLK); + AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; + AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK; #define SHORT_COIL() LOW(GPIO_SSC_DOUT) -#define OPEN_COIL() HIGH(GPIO_SSC_DOUT) +#define OPEN_COIL() HIGH(GPIO_SSC_DOUT) i = 0; for(;;) { - while(!(PIO_PIN_DATA_STATUS & (1<PIO_PDSR & GPIO_SSC_CLK)) { if(BUTTON_PRESS()) { DbpString("Stopped"); return; @@ -473,7 +473,7 @@ void SimulateTagLowFrequency(int period, int ledcontrol) if (ledcontrol) LED_D_OFF(); - while(PIO_PIN_DATA_STATUS & (1<PIO_PDSR & GPIO_SSC_CLK) { if(BUTTON_PRESS()) { DbpString("Stopped"); return; @@ -529,7 +529,7 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0) hitag2_init(); /* Set up simulator mode, frequency divisor which will drive the FPGA - * and analog mux selection. + * and analog mux selection. */ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_SIMULATOR); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor); @@ -539,15 +539,19 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0) /* Set up Timer 1: * Capture mode, timer source MCK/2 (TIMER_CLOCK1), TIOA is external trigger, * external trigger rising edge, load RA on rising edge of TIOA, load RB on rising - * edge of TIOA. Assign PA15 to TIOA1 (peripheral B) + * edge of TIOA. Assign PA15 to TIOA1 (peripheral B) */ - PMC_PERIPHERAL_CLK_ENABLE = (1 << PERIPH_TC1); - PIO_PERIPHERAL_B_SEL = (1 << GPIO_SSC_FRAME); - TC1_CCR = TC_CCR_CLKDIS; - TC1_CMR = TC_CMR_TCCLKS_TIMER_CLOCK1 | TC_CMR_ETRGEDG_RISING | TC_CMR_ABETRG | - TC_CMR_LDRA_RISING | TC_CMR_LDRB_RISING; - TC1_CCR = TC_CCR_CLKEN | TC_CCR_SWTRG; + AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1); + AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME; + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; + AT91C_BASE_TC1->TC_CMR = TC_CMR_TCCLKS_TIMER_CLOCK1 | + AT91C_TC_ETRGEDG_RISING | + AT91C_TC_ABETRG | + AT91C_TC_LDRA_RISING | + AT91C_TC_LDRB_RISING; + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | + AT91C_TC_SWTRG; /* calculate the new value for the carrier period in terms of TC1 values */ t0 = t0/2; @@ -555,8 +559,8 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0) int overflow = 0; while(!BUTTON_PRESS()) { WDT_HIT(); - if(TC1_SR & TC_SR_LDRAS) { - int ra = TC1_RA; + if(AT91C_BASE_TC1->TC_SR & AT91C_TC_LDRAS) { + int ra = AT91C_BASE_TC1->TC_RA; if((ra > t0*HITAG_T_EOF) | overflow) ra = t0*HITAG_T_EOF+1; #if DEBUG_RA_VALUES if(ra > 255 || overflow) ra = 255; @@ -583,14 +587,14 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0) overflow = 0; LED_D_ON(); } else { - if(TC1_CV > t0*HITAG_T_EOF) { + if(AT91C_BASE_TC1->TC_CV > t0*HITAG_T_EOF) { /* Minor nuisance: In Capture mode, the timer can not be * stopped by a Compare C. There's no way to stop the clock * in software, so we'll just have to note the fact that an * overflow happened and the next loaded timer value might * have wrapped. Also, this marks the end of frame, and the * still running counter can be used to determine the correct - * time for the start of the reply. + * time for the start of the reply. */ overflow = 1; @@ -619,37 +623,37 @@ static void hitag_send_bit(int t0, int bit) { /* Manchester: Loaded, then unloaded */ LED_A_ON(); SHORT_COIL(); - while(TC1_CV < t0*15); + while(AT91C_BASE_TC1->TC_CV < t0*15); OPEN_COIL(); - while(TC1_CV < t0*31); + while(AT91C_BASE_TC1->TC_CV < t0*31); LED_A_OFF(); } else if(bit == 0) { /* Manchester: Unloaded, then loaded */ LED_B_ON(); OPEN_COIL(); - while(TC1_CV < t0*15); + while(AT91C_BASE_TC1->TC_CV < t0*15); SHORT_COIL(); - while(TC1_CV < t0*31); + while(AT91C_BASE_TC1->TC_CV < t0*31); LED_B_OFF(); } - TC1_CCR = TC_CCR_SWTRG; /* Reset clock for the next bit */ + AT91C_BASE_TC1->TC_CCR = AT91C_TC_SWTRG; /* Reset clock for the next bit */ } static void hitag_send_frame(int t0, int frame_len, const char const * frame, int fdt) { OPEN_COIL(); - PIO_OUTPUT_ENABLE = (1 << GPIO_SSC_DOUT); + AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; /* Wait for HITAG_T_WRESP carrier periods after the last reader bit, * not that since the clock counts since the rising edge, but T_wresp is * with respect to the falling edge, we need to wait actually (T_wresp - T_g) - * periods. The gap time T_g varies (4..10). + * periods. The gap time T_g varies (4..10). */ - while(TC1_CV < t0*(fdt-8)); + while(AT91C_BASE_TC1->TC_CV < t0*(fdt-8)); - int saved_cmr = TC1_CMR; - TC1_CMR &= ~TC_CMR_ETRGEDG; /* Disable external trigger for the clock */ - TC1_CCR = TC_CCR_SWTRG; /* Reset the clock and use it for response timing */ + int saved_cmr = AT91C_BASE_TC1->TC_CMR; + AT91C_BASE_TC1->TC_CMR &= ~AT91C_TC_ETRGEDG; /* Disable external trigger for the clock */ + AT91C_BASE_TC1->TC_CCR = AT91C_TC_SWTRG; /* Reset the clock and use it for response timing */ int i; for(i=0; i<5; i++) @@ -660,7 +664,7 @@ static void hitag_send_frame(int t0, int frame_len, const char const * frame, in } OPEN_COIL(); - TC1_CMR = saved_cmr; + AT91C_BASE_TC1->TC_CMR = saved_cmr; } /* Callback structure to cleanly separate tag emulation code from the radio layer. */ @@ -813,13 +817,13 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) m = sizeof(BigBuf); memset(dest,128,m); for(;;) { - if(SSC_STATUS & (SSC_STATUS_TX_READY)) { - SSC_TRANSMIT_HOLDING = 0x43; + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = 0x43; if (ledcontrol) LED_D_ON(); } - if(SSC_STATUS & (SSC_STATUS_RX_READY)) { - dest[i] = (BYTE)SSC_RECEIVE_HOLDING; + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { + dest[i] = (BYTE)AT91C_BASE_SSC->SSC_RHR; // we don't care about actual value, only if it's more or less than a // threshold essentially we capture zero crossings for later analysis if(dest[i] < 127) dest[i] = 0; else dest[i] = 1;