X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/111c6934d4e5c58883d08210399afe8eaeccc5c3..86087eba009ffe9440c3b24720ea5f3b8001e850:/armsrc/legicrf.c diff --git a/armsrc/legicrf.c b/armsrc/legicrf.c index 572a870e..4e0bc240 100644 --- a/armsrc/legicrf.c +++ b/armsrc/legicrf.c @@ -7,11 +7,10 @@ //----------------------------------------------------------------------------- // LEGIC RF simulation code //----------------------------------------------------------------------------- - #include "legicrf.h" static struct legic_frame { - int bits; + uint8_t bits; uint32_t data; } current_frame; @@ -69,15 +68,11 @@ static void setup_timer(void) { */ // At TIMER_CLOCK3 (MCK/32) -//#define RWD_TIME_1 150 /* RWD_TIME_PAUSE off, 80us on = 100us */ -//#define RWD_TIME_0 90 /* RWD_TIME_PAUSE off, 40us on = 60us */ -//#define RWD_TIME_PAUSE 30 /* 20us */ - -// testing calculating in ticks instead of (us) microseconds. +// testing calculating in (us) microseconds. #define RWD_TIME_1 120 // READER_TIME_PAUSE 20us off, 80us on = 100us 80 * 1.5 == 120ticks #define RWD_TIME_0 60 // READER_TIME_PAUSE 20us off, 40us on = 60us 40 * 1.5 == 60ticks #define RWD_TIME_PAUSE 30 // 20us == 20 * 1.5 == 30ticks */ -#define TAG_BIT_PERIOD 150 // 100us == 100 * 1.5 == 150ticks +#define TAG_BIT_PERIOD 143 // 100us == 100 * 1.5 == 150ticks #define TAG_FRAME_WAIT 495 // 330us from READER frame end to TAG frame start. 330 * 1.5 == 495 #define RWD_TIME_FUZZ 20 // rather generous 13us, since the peak detector + hysteresis fuzz quite a bit @@ -90,30 +85,24 @@ static void setup_timer(void) { #define FUZZ_EQUAL(value, target, fuzz) ((value) > ((target)-(fuzz)) && (value) < ((target)+(fuzz))) #ifndef SHORT_COIL -//#define LOW(x) AT91C_BASE_PIOA->PIO_CODR = (x) # define SHORT_COIL LOW(GPIO_SSC_DOUT); #endif #ifndef OPEN_COIL -//#define HIGH(x) AT91C_BASE_PIOA->PIO_SODR = (x) # define OPEN_COIL HIGH(GPIO_SSC_DOUT); #endif -uint32_t stop_send_frame_us = 0; - // Pause pulse, off in 20us / 30ticks, // ONE / ZERO bit pulse, // one == 80us / 120ticks // zero == 40us / 60ticks #ifndef COIL_PULSE -# define COIL_PULSE(x) { \ +# define COIL_PULSE(x) \ + do { \ SHORT_COIL; \ - Wait(RWD_TIME_PAUSE); \ + WaitTicks( (RWD_TIME_PAUSE) ); \ OPEN_COIL; \ - Wait((x)); \ - } -#endif -#ifndef GET_TICKS -# define GET_TICKS AT91C_BASE_TC0->TC_CV + WaitTicks((x)); \ + } while (0) #endif // ToDo: define a meaningful maximum size for auth_table. The bigger this is, the lower will be the available memory for traces. @@ -121,23 +110,7 @@ uint32_t stop_send_frame_us = 0; #define LEGIC_CARD_MEMSIZE 1024 static uint8_t* cardmem; -static void Wait(uint32_t time){ - if ( time == 0 ) return; - time += GET_TICKS; - while (GET_TICKS < time); -} -// Starts Clock and waits until its reset -static void Reset(AT91PS_TC clock){ - clock->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; - while(clock->TC_CV > 1) ; -} - -// Starts Clock and waits until its reset -static void ResetClock(void){ - Reset(timer); -} - -static void frame_append_bit(struct legic_frame * const f, int bit) { +static void frame_append_bit(struct legic_frame * const f, uint8_t bit) { // Overflow, won't happen if (f->bits >= 31) return; @@ -154,7 +127,7 @@ static void frame_clean(struct legic_frame * const f) { // and while sending/receiving in bit frames (100, 60) /*static void CalibratePrng( uint32_t time){ // Calculate Cycles based on timer 100us - uint32_t i = (time - stop_send_frame_us) / 100 ; + uint32_t i = (time - sendFrameStop) / 100 ; // substract cycles of finished frames int k = i - legic_prng_count()+1; @@ -166,8 +139,7 @@ static void frame_clean(struct legic_frame * const f) { */ /* Generate Keystream */ -static uint32_t get_key_stream(int skip, int count) -{ +uint32_t get_key_stream(int skip, int count) { uint32_t key = 0; int i; @@ -175,7 +147,7 @@ static uint32_t get_key_stream(int skip, int count) legic_prng_bc += prng_timer->TC_CV; // reset the prng timer. - Reset(prng_timer); + ResetTimer(prng_timer); /* If skip == -1, forward prng time based */ if(skip == -1) { @@ -209,7 +181,7 @@ static uint32_t get_key_stream(int skip, int count) /* Send a frame in tag mode, the FPGA must have been set up by * LegicRfSimulate */ -static void frame_send_tag(uint16_t response, uint8_t bits, uint8_t crypt) { +void frame_send_tag(uint16_t response, uint8_t bits, uint8_t crypt) { /* Bitbang the response */ LOW(GPIO_SSC_DOUT); AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; @@ -222,7 +194,7 @@ static void frame_send_tag(uint16_t response, uint8_t bits, uint8_t crypt) { } /* Wait for the frame start */ - Wait( TAG_FRAME_WAIT ); + WaitUS( TAG_FRAME_WAIT ); uint8_t bit = 0; for(int i = 0; i < bits; i++) { @@ -235,7 +207,7 @@ static void frame_send_tag(uint16_t response, uint8_t bits, uint8_t crypt) { else LOW(GPIO_SSC_DOUT); - Wait(100); + WaitUS(100); } LOW(GPIO_SSC_DOUT); } @@ -243,35 +215,27 @@ static void frame_send_tag(uint16_t response, uint8_t bits, uint8_t crypt) { /* Send a frame in reader mode, the FPGA must have been set up by * LegicRfReader */ -static void frame_sendAsReader(uint32_t data, uint8_t bits){ +void frame_sendAsReader(uint32_t data, uint8_t bits){ uint32_t starttime = GET_TICKS, send = 0; uint16_t mask = 1; - uint8_t prng1 = legic_prng_count() ; // xor lsfr onto data. send = data ^ legic_prng_get_bits(bits); for (; mask < BITMASK(bits); mask <<= 1) { - if (send & mask) { + if (send & mask) COIL_PULSE(RWD_TIME_1); - } else { + else COIL_PULSE(RWD_TIME_0); - } } // Final pause to mark the end of the frame COIL_PULSE(0); - stop_send_frame_us = GET_TICKS; - uint8_t cmdbytes[] = { - BYTEx(data, 0), - BYTEx(data, 1), - bits, - prng1, - legic_prng_count() - }; - LogTrace(cmdbytes, sizeof(cmdbytes), starttime, stop_send_frame_us, NULL, TRUE); + // log + uint8_t cmdbytes[] = {bits, BYTEx(data, 0), BYTEx(data, 1), BYTEx(send, 0), BYTEx(send, 1)}; + LogTrace(cmdbytes, sizeof(cmdbytes), starttime, GET_TICKS, NULL, TRUE); } /* Receive a frame from the card in reader emulation mode, the FPGA and @@ -297,36 +261,30 @@ static void frame_sendAsReader(uint32_t data, uint8_t bits){ */ static void frame_receiveAsReader(struct legic_frame * const f, uint8_t bits) { - frame_clean(f); + if ( bits > 32 ) return; - uint8_t i = 0, edges = 0; - uint16_t lsfr = 0; - uint32_t the_bit = 1, next_bit_at = 0, data; - int old_level = 0, level = 0; - - if(bits > 32) bits = 32; - + uint8_t i = bits, edges = 0; + uint32_t the_bit = 1, next_bit_at = 0, data = 0; + uint32_t old_level = 0; + volatile uint32_t level = 0; + + frame_clean(f); + AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; - // calibrate the prng. + // calibrate the prng. legic_prng_forward(2); - - // precompute the cipher - uint8_t prng_before = legic_prng_count() ; - - lsfr = legic_prng_get_bits(bits); - - data = lsfr; + data = legic_prng_get_bits(bits); //FIXED time between sending frame and now listening frame. 330us - Wait( TAG_FRAME_WAIT ); - uint32_t starttime = GET_TICKS; - - next_bit_at = GET_TICKS + TAG_BIT_PERIOD; - - for( i = 0; i < bits; i++) { + // its about 9+9 ticks delay from end-send to here. + WaitTicks( 477 ); + + next_bit_at = GET_TICKS + TAG_BIT_PERIOD; + + while ( i-- ){ edges = 0; while ( GET_TICKS < next_bit_at) { @@ -336,43 +294,34 @@ static void frame_receiveAsReader(struct legic_frame * const f, uint8_t bits) { ++edges; old_level = level; - } + } + next_bit_at += TAG_BIT_PERIOD; - // We expect 42 edges == ONE - if(edges > 20 && edges < 60) { + // We expect 42 edges (ONE) + if ( edges > 20 ) data ^= the_bit; - } - the_bit <<= 1; + + the_bit <<= 1; } // output f->data = data; f->bits = bits; - - // log - stop_send_frame_us = GET_TICKS; - uint8_t cmdbytes[] = { - BYTEx(data,0), - BYTEx(data,1), - bits, - BYTEx(lsfr,0), - BYTEx(lsfr,1), - prng_before, - legic_prng_count() - }; - LogTrace(cmdbytes, sizeof(cmdbytes), starttime, stop_send_frame_us, NULL, FALSE); + // log + uint8_t cmdbytes[] = {bits, BYTEx(data, 0), BYTEx(data, 1)}; + LogTrace(cmdbytes, sizeof(cmdbytes), starttime, GET_TICKS, NULL, FALSE); } // Setup pm3 as a Legic Reader -static uint32_t perform_setup_phase_rwd(uint8_t iv) { - +static uint32_t setup_phase_reader(uint8_t iv) { + // Switch on carrier and let the tag charge for 1ms HIGH(GPIO_SSC_DOUT); - SpinDelay(40); + WaitUS(5000); - ResetUSClock(); + ResetTicks(); // no keystream yet legic_prng_init(0); @@ -385,32 +334,30 @@ static uint32_t perform_setup_phase_rwd(uint8_t iv) { frame_receiveAsReader(¤t_frame, 6); - // fixed delay before sending ack. - Wait(TAG_FRAME_WAIT); - legic_prng_forward(4); + // 292us (438t) - fixed delay before sending ack. + // minus log and stuff 100tick? + WaitTicks(338); + legic_prng_forward(3); // Send obsfuscated acknowledgment frame. // 0x19 = 0x18 MIM22, 0x01 LSB READCMD // 0x39 = 0x38 MIM256, MIM1024 0x01 LSB READCMD switch ( current_frame.data ) { - case 0x0D: - frame_sendAsReader(0x19, 6); - break; - case 0x1D: - case 0x3D: - frame_sendAsReader(0x39, 6); - break; - default: - break; + case 0x0D: frame_sendAsReader(0x19, 6); break; + case 0x1D: + case 0x3D: frame_sendAsReader(0x39, 6); break; + default: break; } + + legic_prng_forward(2); return current_frame.data; } -static void LegicCommonInit(void) { +static void LegicCommonInit(void) { + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX); SetAdcMuxFor(GPIO_MUXSEL_HIPKD); - FpgaSetupSsc(); /* Bitbang the transmitter */ LOW(GPIO_SSC_DOUT); @@ -418,51 +365,52 @@ static void LegicCommonInit(void) { AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; // reserve a cardmem, meaning we can use the tracelog function in bigbuff easier. - cardmem = BigBuf_malloc(LEGIC_CARD_MEMSIZE); + cardmem = BigBuf_get_EM_addr(); memset(cardmem, 0x00, LEGIC_CARD_MEMSIZE); clear_trace(); set_tracing(TRUE); crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0); - StartCountUS(); + StartTicks(); } // Switch off carrier, make sure tag is reset static void switch_off_tag_rwd(void) { LOW(GPIO_SSC_DOUT); - SpinDelay(10); + WaitUS(20); WDT_HIT(); } // calculate crc4 for a legic READ command -// 5,8,10 address size. -static uint32_t legic4Crc(uint8_t legicCmd, uint16_t byte_index, uint8_t value, uint8_t cmd_sz) { +static uint32_t legic4Crc(uint8_t cmd, uint16_t byte_index, uint8_t value, uint8_t cmd_sz) { crc_clear(&legic_crc); - uint32_t temp = (value << cmd_sz) | (byte_index << 1) | legicCmd; + uint32_t temp = (value << cmd_sz) | (byte_index << 1) | cmd; crc_update(&legic_crc, temp, cmd_sz + 8 ); return crc_finish(&legic_crc); } -int legic_read_byte(int byte_index, int cmd_sz) { +int legic_read_byte( uint16_t index, uint8_t cmd_sz) { - uint8_t byte = 0, crc = 0; - uint32_t calcCrc = 0; - uint32_t cmd = (byte_index << 1) | LEGIC_READ; + uint8_t byte, crc, calcCrc = 0; + uint32_t cmd = (index << 1) | LEGIC_READ; - Wait(TAG_FRAME_WAIT); + //WaitTicks(366); + WaitTicks(330); frame_sendAsReader(cmd, cmd_sz); frame_receiveAsReader(¤t_frame, 12); + // CRC check. byte = BYTEx(current_frame.data, 0); - calcCrc = legic4Crc(LEGIC_READ, byte_index, byte, cmd_sz); crc = BYTEx(current_frame.data, 1); + calcCrc = legic4Crc(LEGIC_READ, index, byte, cmd_sz); if( calcCrc != crc ) { Dbprintf("!!! crc mismatch: expected %x but got %x !!!", calcCrc, crc); return -1; } + legic_prng_forward(4); return byte; } @@ -484,11 +432,11 @@ int legic_write_byte(uint8_t byte, uint16_t addr, uint8_t addr_sz) { crc_update(&legic_crc, addr, addr_sz); crc_update(&legic_crc, byte, 8); uint32_t crc = crc_finish(&legic_crc); - uint32_t crc2 = legic4Crc(LEGIC_WRITE, addr, byte, addr_sz+1); - if ( crc != crc2 ) + if ( crc != crc2 ) { Dbprintf("crc is missmatch"); - + return 1; + } // send write command uint32_t cmd = ((crc <<(addr_sz+1+8)) //CRC |(byte <<(addr_sz+1)) //Data @@ -499,11 +447,10 @@ int legic_write_byte(uint8_t byte, uint16_t addr, uint8_t addr_sz) { legic_prng_forward(2); /* we wait anyways */ - Wait(TAG_FRAME_WAIT); + WaitTicks(330); frame_sendAsReader(cmd, cmd_sz); - - // wllm-rbnt doesnt have these + AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; @@ -511,97 +458,72 @@ int legic_write_byte(uint8_t byte, uint16_t addr, uint8_t addr_sz) { int t, old_level = 0, edges = 0; int next_bit_at = 0; - Wait(TAG_FRAME_WAIT); + WaitUS(TAG_FRAME_WAIT); for( t = 0; t < 80; ++t) { edges = 0; next_bit_at += TAG_BIT_PERIOD; while(timer->TC_CV < next_bit_at) { - int level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); + volatile uint32_t level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); if(level != old_level) edges++; old_level = level; } - if(edges > 20 && edges < 60) { /* expected are 42 edges */ + if(edges > 20 ) { /* expected are 42 edges */ int t = timer->TC_CV; int c = t / TAG_BIT_PERIOD; - ResetClock(); + ResetTimer(timer); legic_prng_forward(c); return 0; } } - ResetClock(); + ResetTimer(timer); return -1; } -int LegicRfReader(int offset, int bytes, int iv) { +int LegicRfReader(uint16_t offset, uint16_t len, uint8_t iv) { - uint16_t byte_index = 0; - uint8_t cmd_sz = 0; - int card_sz = 0; + len &= 0x3FF; - if ( MF_DBGLEVEL >= 2) - Dbprintf("setting up legic card, IV = 0x%03.3x", iv); + uint16_t i = 0; + uint8_t isOK = 1; + legic_card_select_t card; LegicCommonInit(); - - uint32_t tag_type = perform_setup_phase_rwd(iv); - - //we lose to mutch time with dprintf - switch_off_tag_rwd(); - switch(tag_type) { - case 0x0d: - if ( MF_DBGLEVEL >= 2) DbpString("MIM22 card found, reading card"); - cmd_sz = 6; - card_sz = 22; - break; - case 0x1d: - if ( MF_DBGLEVEL >= 2) DbpString("MIM256 card found, reading card"); - cmd_sz = 9; - card_sz = 256; - break; - case 0x3d: - if ( MF_DBGLEVEL >= 2) DbpString("MIM1024 card found, reading card"); - cmd_sz = 11; - card_sz = 1024; - break; - default: - if ( MF_DBGLEVEL >= 1) Dbprintf("Unknown card format: %x", tag_type); - return 1; + if ( legic_select_card_iv(&card, iv) ) { + isOK = 0; + goto OUT; } - if (bytes == -1) - bytes = card_sz; - if (bytes + offset >= card_sz) - bytes = card_sz - offset; + switch_off_tag_rwd(); - // Start setup and read bytes. - perform_setup_phase_rwd(iv); + if (len + offset >= card.cardsize) + len = card.cardsize - offset; + setup_phase_reader(iv); + LED_B_ON(); - while (byte_index < bytes) { - int r = legic_read_byte(byte_index + offset, cmd_sz); + while (i < len) { + int r = legic_read_byte(offset + i, card.cmdsize); if (r == -1 || BUTTON_PRESS()) { - switch_off_tag_rwd(); - LEDsoff(); if ( MF_DBGLEVEL >= 2) DbpString("operation aborted"); - cmd_send(CMD_ACK,0,0,0,0,0); - return 1; + isOK = 0; + goto OUT; } - cardmem[++byte_index] = r; - //byte_index++; + cardmem[i++] = r; WDT_HIT(); } +OUT: + WDT_HIT(); switch_off_tag_rwd(); LEDsoff(); - uint8_t len = (bytes & 0x3FF); - cmd_send(CMD_ACK,1,len,0,0,0); + cmd_send(CMD_ACK, isOK, len, 0, cardmem, len); return 0; } @@ -609,7 +531,7 @@ int LegicRfReader(int offset, int bytes, int iv) { int byte_index=0; LED_B_ON(); - perform_setup_phase_rwd(iv); + setup_phase_reader(iv); //legic_prng_forward(2); while(byte_index < bytes) { int r; @@ -646,25 +568,27 @@ int LegicRfReader(int offset, int bytes, int iv) { return 0; }*/ -void LegicRfWriter(int offset, int bytes, int iv) { +void LegicRfWriter(uint16_t offset, uint16_t bytes, uint8_t iv) { - int byte_index = 0, addr_sz = 0; - - LegicCommonInit(); + int byte_index = 0; + uint8_t isOK = 1; + legic_card_select_t card; - if ( MF_DBGLEVEL >= 2) DbpString("setting up legic card"); + LegicCommonInit(); - uint32_t tag_type = perform_setup_phase_rwd(iv); + if ( legic_select_card_iv(&card, iv) ) { + isOK = 0; + goto OUT; + } switch_off_tag_rwd(); - switch(tag_type) { + switch(card.tagtype) { case 0x0d: if(offset+bytes > 22) { Dbprintf("Error: can not write to 0x%03.3x on MIM22", offset + bytes); return; } - addr_sz = 5; if ( MF_DBGLEVEL >= 2) Dbprintf("MIM22 card found, writing 0x%02.2x - 0x%02.2x ...", offset, offset + bytes); break; case 0x1d: @@ -672,7 +596,6 @@ void LegicRfWriter(int offset, int bytes, int iv) { Dbprintf("Error: can not write to 0x%03.3x on MIM256", offset + bytes); return; } - addr_sz = 8; if ( MF_DBGLEVEL >= 2) Dbprintf("MIM256 card found, writing 0x%02.2x - 0x%02.2x ...", offset, offset + bytes); break; case 0x3d: @@ -680,49 +603,50 @@ void LegicRfWriter(int offset, int bytes, int iv) { Dbprintf("Error: can not write to 0x%03.3x on MIM1024", offset + bytes); return; } - addr_sz = 10; if ( MF_DBGLEVEL >= 2) Dbprintf("MIM1024 card found, writing 0x%03.3x - 0x%03.3x ...", offset, offset + bytes); break; default: - Dbprintf("No or unknown card found, aborting"); return; } LED_B_ON(); - perform_setup_phase_rwd(iv); + setup_phase_reader(iv); + int r = 0; while(byte_index < bytes) { //check if the DCF should be changed if ( ((byte_index+offset) == 0x05) && (bytes >= 0x02) ) { //write DCF in reverse order (addr 0x06 before 0x05) - r = legic_write_byte(cardmem[(0x06-byte_index)], (0x06-byte_index), addr_sz); + r = legic_write_byte(cardmem[(0x06-byte_index)], (0x06-byte_index), card.addrsize); - // write second byte on success... + // write second byte on success if(r == 0) { byte_index++; - r = legic_write_byte(cardmem[(0x06-byte_index)], (0x06-byte_index), addr_sz); + r = legic_write_byte(cardmem[(0x06-byte_index)], (0x06-byte_index), card.addrsize); } } else { - r = legic_write_byte(cardmem[byte_index+offset], byte_index+offset, addr_sz); + r = legic_write_byte(cardmem[byte_index+offset], byte_index+offset, card.addrsize); } if ((r != 0) || BUTTON_PRESS()) { Dbprintf("operation aborted @ 0x%03.3x", byte_index); - switch_off_tag_rwd(); - LEDsoff(); - return; + isOK = 0; + goto OUT; } WDT_HIT(); byte_index++; } - LEDsoff(); - if ( MF_DBGLEVEL >= 1) DbpString("write successful"); + +OUT: + cmd_send(CMD_ACK, isOK, 0,0,0,0); + switch_off_tag_rwd(); + LEDsoff(); } -void LegicRfRawWriter(int address, int byte, int iv) { +void LegicRfRawWriter(int address, int byte, uint8_t iv) { int byte_index = 0, addr_sz = 0; @@ -730,7 +654,7 @@ void LegicRfRawWriter(int address, int byte, int iv) { if ( MF_DBGLEVEL >= 2) DbpString("setting up legic card"); - uint32_t tag_type = perform_setup_phase_rwd(iv); + uint32_t tag_type = setup_phase_reader(iv); switch_off_tag_rwd(); @@ -767,7 +691,7 @@ void LegicRfRawWriter(int address, int byte, int iv) { Dbprintf("integer value: %d address: %d addr_sz: %d", byte, address, addr_sz); LED_B_ON(); - perform_setup_phase_rwd(iv); + setup_phase_reader(iv); int r = legic_write_byte(byte, address, addr_sz); @@ -782,6 +706,69 @@ void LegicRfRawWriter(int address, int byte, int iv) { if ( MF_DBGLEVEL >= 1) DbpString("write successful"); } +int legic_select_card_iv(legic_card_select_t *p_card, uint8_t iv){ + + if ( p_card == NULL ) return 1; + + p_card->tagtype = setup_phase_reader(iv); + + switch(p_card->tagtype) { + case 0x0d: + p_card->cmdsize = 6; + p_card->addrsize = 5; + p_card->cardsize = 22; + break; + case 0x1d: + p_card->cmdsize = 9; + p_card->addrsize = 8; + p_card->cardsize = 256; + break; + case 0x3d: + p_card->cmdsize = 11; + p_card->addrsize = 10; + p_card->cardsize = 1024; + break; + default: + p_card->cmdsize = 0; + p_card->addrsize = 0; + p_card->cardsize = 0; + return 2; + } + return 0; +} +int legic_select_card(legic_card_select_t *p_card){ + return legic_select_card_iv(p_card, 0x01); +} + +void LegicRfInfo(void){ + + uint8_t buf[sizeof(legic_card_select_t)] = {0x00}; + legic_card_select_t *card = (legic_card_select_t*) buf; + + LegicCommonInit(); + + if ( legic_select_card(card) ) { + cmd_send(CMD_ACK,0,0,0,0,0); + goto OUT; + } + + // read UID bytes + for ( uint8_t i = 0; i < sizeof(card->uid); ++i) { + int r = legic_read_byte(i, card->cmdsize); + if ( r == -1 ) { + cmd_send(CMD_ACK,0,0,0,0,0); + goto OUT; + } + card->uid[i] = r & 0xFF; + } + + cmd_send(CMD_ACK, 1, 0, 0, buf, sizeof(legic_card_select_t)); + +OUT: + switch_off_tag_rwd(); + LEDsoff(); +} + /* Handle (whether to respond) a frame in tag mode * Only called when simulating a tag. */ @@ -795,7 +782,7 @@ static void frame_handle_tag(struct legic_frame const * const f) LED_C_ON(); // Reset prng timer - Reset(prng_timer); + ResetTimer(prng_timer); legic_prng_init(f->data); frame_send_tag(0x3d, 6, 1); /* 0x3d^0x26 = 0x1B */ @@ -805,8 +792,8 @@ static void frame_handle_tag(struct legic_frame const * const f) legic_prng_iv = f->data; - ResetClock(); - Wait(280); + ResetTimer(timer); + WaitUS(280); return; } @@ -817,8 +804,8 @@ static void frame_handle_tag(struct legic_frame const * const f) if((f->bits == 6) && (f->data == xored)) { legic_state = STATE_CON; - ResetClock(); - Wait(200); + ResetTimer(timer); + WaitUS(200); return; } else { @@ -844,9 +831,9 @@ static void frame_handle_tag(struct legic_frame const * const f) frame_send_tag(hash | data, 12, 1); - ResetClock(); + ResetTimer(timer); legic_prng_forward(2); - Wait(180); + WaitUS(180); return; } } @@ -997,10 +984,6 @@ void LegicRfSimulate(int phase, int frame, int reqresp) LEDsoff(); } -//----------------------------------------------------------------------------- -//----------------------------------------------------------------------------- - - //----------------------------------------------------------------------------- // Code up a string of octets at layer 2 (including CRC, we don't generate // that here) so that they can be transmitted to the reader. Doesn't transmit @@ -1092,6 +1075,7 @@ void LegicRfSimulate(int phase, int frame, int reqresp) // The software UART that receives commands from the reader, and its state // variables. //----------------------------------------------------------------------------- +/* static struct { enum { STATE_UNSYNCD, @@ -1106,7 +1090,7 @@ static struct { int posCnt; uint8_t *output; } Uart; - +*/ /* Receive & handle a bit coming from the reader. * * This function is called 4 times per bit (every 2 subcarrier cycles). @@ -1231,7 +1215,7 @@ static struct { // return FALSE; // } - +/* static void UartReset() { Uart.byteCntMax = 3; @@ -1241,7 +1225,7 @@ static void UartReset() { Uart.posCnt = 0; memset(Uart.output, 0x00, 3); } - +*/ // static void UartInit(uint8_t *data) { // Uart.output = data; // UartReset(); @@ -1253,7 +1237,7 @@ static void UartReset() { // tag's response, which we leave in the buffer to be demodulated on the // PC side. //============================================================================= - +/* static struct { enum { DEMOD_UNSYNCD, @@ -1272,7 +1256,7 @@ static struct { int sumI; int sumQ; } Demod; - +*/ /* * Handles reception of a bit from the tag * @@ -1287,32 +1271,8 @@ static struct { * false if we are still waiting for some more * */ - - #ifndef SUBCARRIER_DETECT_THRESHOLD - # define SUBCARRIER_DETECT_THRESHOLD 8 - #endif - // Subcarrier amplitude v = sqrt(ci^2 + cq^2), approximated here by max(abs(ci),abs(cq)) + 1/2*min(abs(ci),abs(cq))) -#ifndef CHECK_FOR_SUBCARRIER -# define CHECK_FOR_SUBCARRIER() { v = MAX(ai, aq) + MIN(halfci, halfcq); } -#endif - -// The soft decision on the bit uses an estimate of just the -// quadrant of the reference angle, not the exact angle. -// Subcarrier amplitude v = sqrt(ci^2 + cq^2), approximated here by max(abs(ci),abs(cq)) + 1/2*min(abs(ci),abs(cq))) -#define MAKE_SOFT_DECISION() { \ - if(Demod.sumI > 0) \ - v = ci; \ - else \ - v = -ci; \ - \ - if(Demod.sumQ > 0) \ - v += cq; \ - else \ - v -= cq; \ - \ - } - +/* static RAMFUNC int HandleLegicSamplesDemod(int ci, int cq) { int v = 0; @@ -1467,7 +1427,8 @@ static RAMFUNC int HandleLegicSamplesDemod(int ci, int cq) } return FALSE; } - +*/ +/* // Clear out the state of the "UART" that receives from the tag. static void DemodReset() { Demod.len = 0; @@ -1485,13 +1446,17 @@ static void DemodInit(uint8_t *data) { Demod.output = data; DemodReset(); } +*/ /* * Demodulate the samples we received from the tag, also log to tracebuffer * quiet: set to 'TRUE' to disable debug output */ + + /* #define LEGIC_DMA_BUFFER_SIZE 256 -static void GetSamplesForLegicDemod(int n, bool quiet) + + static void GetSamplesForLegicDemod(int n, bool quiet) { int max = 0; bool gotFrame = FALSE; @@ -1566,9 +1531,13 @@ static void GetSamplesForLegicDemod(int n, bool quiet) LogTrace(Demod.output, Demod.len, 0, 0, parity, FALSE); } } + +*/ + //----------------------------------------------------------------------------- // Transmit the command (to the tag) that was placed in ToSend[]. //----------------------------------------------------------------------------- +/* static void TransmitForLegic(void) { int c; @@ -1615,12 +1584,13 @@ static void TransmitForLegic(void) } LED_B_OFF(); } - +*/ //----------------------------------------------------------------------------- // Code a layer 2 command (string of octets, including CRC) into ToSend[], // so that it is ready to transmit to the tag using TransmitForLegic(). //----------------------------------------------------------------------------- +/* static void CodeLegicBitsAsReader(const uint8_t *cmd, uint8_t cmdlen, int bits) { int i, j; @@ -1652,11 +1622,12 @@ static void CodeLegicBitsAsReader(const uint8_t *cmd, uint8_t cmdlen, int bits) // Convert from last character reference to length ++ToSendMax; } - +*/ /** Convenience function to encode, transmit and trace Legic comms **/ -static void CodeAndTransmitLegicAsReader(const uint8_t *cmd, uint8_t cmdlen, int bits) +/* + static void CodeAndTransmitLegicAsReader(const uint8_t *cmd, uint8_t cmdlen, int bits) { CodeLegicBitsAsReader(cmd, cmdlen, bits); TransmitForLegic(); @@ -1666,58 +1637,9 @@ static void CodeAndTransmitLegicAsReader(const uint8_t *cmd, uint8_t cmdlen, int } } -int ice_legic_select_card() -{ - //int cmd_size=0, card_size=0; - uint8_t wakeup[] = { 0x7F }; - uint8_t getid[] = {0x19}; - - //legic_prng_init(SESSION_IV); - - // first, wake up the tag, 7bits - CodeAndTransmitLegicAsReader(wakeup, sizeof(wakeup), 7); - - GetSamplesForLegicDemod(1000, TRUE); - - //frame_receiveAsReader(¤t_frame, 6, 1); - - legic_prng_forward(1); /* we wait anyways */ - - //while(timer->TC_CV < 387) ; /* ~ 258us */ - //frame_sendAsReader(0x19, 6); - CodeAndTransmitLegicAsReader(getid, sizeof(getid), 8); - GetSamplesForLegicDemod(1000, TRUE); - - //if (Demod.len < 14) return 2; - Dbprintf("CARD TYPE: %02x LEN: %d", Demod.output[0], Demod.len); - - switch(Demod.output[0]) { - case 0x1d: - DbpString("MIM 256 card found"); - // cmd_size = 9; - // card_size = 256; - break; - case 0x3d: - DbpString("MIM 1024 card found"); - // cmd_size = 11; - // card_size = 1024; - break; - default: - return -1; - } - - // if(bytes == -1) - // bytes = card_size; - - // if(bytes + offset >= card_size) - // bytes = card_size - offset; - - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - set_tracing(FALSE); - return 1; -} - +*/ // Set up LEGIC communication +/* void ice_legic_setup() { // standard things. @@ -1746,4 +1668,5 @@ void ice_legic_setup() { // initalize prng legic_prng_init(0); -} \ No newline at end of file +} +*/ \ No newline at end of file