X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/13d77ef964cefe68750873d5268299a53c9e22a5..refs/pull/245/head:/client/cmdlft55xx.c

diff --git a/client/cmdlft55xx.c b/client/cmdlft55xx.c
index 57540bd8..b287ce28 100644
--- a/client/cmdlft55xx.c
+++ b/client/cmdlft55xx.c
@@ -10,6 +10,8 @@
 #include <stdio.h>
 #include <string.h>
 #include <inttypes.h>
+#include <ctype.h>
+#include <time.h>
 #include "proxmark3.h"
 #include "ui.h"
 #include "graph.h"
@@ -21,24 +23,34 @@
 #include "util.h"
 #include "data.h"
 #include "lfdemod.h"
-#include "../common/crc.h"
-#include "../common/iso14443crc.h"
-#include "cmdhf14a.h"
+#include "cmdhf14a.h" //for getTagInfo
 
-#define CONFIGURATION_BLOCK 0x00
-#define TRACE_BLOCK 0x01
+#define T55x7_CONFIGURATION_BLOCK 0x00
+#define T55x7_PAGE0 0x00
+#define T55x7_PAGE1 0x01
+//#define T55x7_PWD	0x00000010
+#define REGULAR_READ_MODE_BLOCK 0xFF
 
 // Default configuration
-t55xx_conf_block_t config = { .modulation = DEMOD_ASK, .inverted = FALSE, .offset = 0x00, .block0 = 0x00};
+t55xx_conf_block_t config = { .modulation = DEMOD_ASK, .inverted = false, .offset = 0x00, .block0 = 0x00, .Q5 = false };
+
+t55xx_conf_block_t Get_t55xx_Config(){
+	return config;
+}
+void Set_t55xx_Config(t55xx_conf_block_t conf){
+	config = conf;
+}
 
 int usage_t55xx_config(){
-	PrintAndLog("Usage: lf t55xx config [d <demodulation>] [i 1] [o <offset>]");
-	PrintAndLog("Options:        ");
+	PrintAndLog("Usage: lf t55xx config [d <demodulation>] [i 1] [o <offset>] [Q5]");
+	PrintAndLog("Options:");
 	PrintAndLog("       h                        This help");
-	PrintAndLog("       b <8|16|32|40|50|64|100|128>     Set bitrate");
-	PrintAndLog("       d <FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NZ|BI|BIa>  Set demodulation FSK / ASK / PSK / NZ / Biphase / Biphase A");
-	PrintAndLog("       i [1]                            Invert data signal, defaults to normal");
-	PrintAndLog("       o [offset]                       Set offset, where data should start decode in bitstream");
+	PrintAndLog("       b <8|16|32|40|50|64|100|128>  Set bitrate");
+	PrintAndLog("       d <FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NRZ|BI|BIa>  Set demodulation FSK / ASK / PSK / NRZ / Biphase / Biphase A");
+	PrintAndLog("       i [1]                         Invert data signal, defaults to normal");
+	PrintAndLog("       o [offset]                    Set offset, where data should start decode in bitstream");
+	PrintAndLog("       Q5                            Set as Q5(T5555) chip instead of T55x7");
+	PrintAndLog("       ST                            Set Sequence Terminator on");
 	PrintAndLog("");
 	PrintAndLog("Examples:");
 	PrintAndLog("      lf t55xx config d FSK          - FSK demodulation");
@@ -48,31 +60,41 @@ int usage_t55xx_config(){
 	return 0;
 }
 int usage_t55xx_read(){
-	PrintAndLog("Usage:  lf t55xx read <block> <password>");
-    PrintAndLog("     <block>, block number to read. Between 0-7");
-    PrintAndLog("     <password>, OPTIONAL password (8 hex characters)");
-    PrintAndLog("");
+	PrintAndLog("Usage:  lf t55xx read [b <block>] [p <password>] <override_safety> <page1>");
+	PrintAndLog("Options:");
+	PrintAndLog("     b <block>    - block number to read. Between 0-7");
+	PrintAndLog("     p <password> - OPTIONAL password (8 hex characters)");
+	PrintAndLog("     o            - OPTIONAL override safety check");
+	PrintAndLog("     1            - OPTIONAL read Page 1 instead of Page 0");
+	PrintAndLog("     ****WARNING****");
+	PrintAndLog("     Use of read with password on a tag not configured for a pwd");
+	PrintAndLog("     can damage the tag");
+	PrintAndLog("");
 	PrintAndLog("Examples:");
-    PrintAndLog("      lf t55xx read 0           - read data from block 0");
-	PrintAndLog("      lf t55xx read 0 feedbeef  - read data from block 0 password feedbeef");
+	PrintAndLog("      lf t55xx read b 0              - read data from block 0");
+	PrintAndLog("      lf t55xx read b 0 p feedbeef   - read data from block 0 password feedbeef");
+	PrintAndLog("      lf t55xx read b 0 p feedbeef o - read data from block 0 password feedbeef safety check");
 	PrintAndLog("");
 	return 0;
 }
 int usage_t55xx_write(){
-	PrintAndLog("Usage:  lf t55xx wr <block> <data> [password]");
-    PrintAndLog("     <block>, block number to read. Between 0-7");
-	PrintAndLog("     <data>,  4 bytes of data to write (8 hex characters)");
-    PrintAndLog("     [password], OPTIONAL password 4bytes (8 hex characters)");
-    PrintAndLog("");
+	PrintAndLog("Usage:  lf t55xx write [b <block>] [d <data>] [p <password>] [1]");
+	PrintAndLog("Options:");
+	PrintAndLog("     b <block>    - block number to write. Between 0-7");
+	PrintAndLog("     d <data>     - 4 bytes of data to write (8 hex characters)");
+	PrintAndLog("     p <password> - OPTIONAL password 4bytes (8 hex characters)");
+	PrintAndLog("     1            - OPTIONAL write Page 1 instead of Page 0");
+	PrintAndLog("");
 	PrintAndLog("Examples:");
-    PrintAndLog("      lf t55xx wd 3 11223344           - write 11223344 to block 3");
-	PrintAndLog("      lf t55xx wd 3 11223344 feedbeef  - write 11223344 to block 3 password feedbeef");
+	PrintAndLog("      lf t55xx write b 3 d 11223344            - write 11223344 to block 3");
+	PrintAndLog("      lf t55xx write b 3 d 11223344 p feedbeef - write 11223344 to block 3 password feedbeef");
 	PrintAndLog("");
 	return 0;
 }
 int usage_t55xx_trace() {
 	PrintAndLog("Usage:  lf t55xx trace [1]");
-	PrintAndLog("     [graph buffer data], if set, use Graphbuffer otherwise read data from tag.");
+	PrintAndLog("Options:");
+	PrintAndLog("     [graph buffer data]  - if set, use Graphbuffer otherwise read data from tag.");
 	PrintAndLog("");
 	PrintAndLog("Examples:");
 	PrintAndLog("      lf t55xx trace");
@@ -82,7 +104,8 @@ int usage_t55xx_trace() {
 }
 int usage_t55xx_info() {
 	PrintAndLog("Usage:  lf t55xx info [1]");
-	PrintAndLog("     [graph buffer data], if set, use Graphbuffer otherwise read data from tag.");
+	PrintAndLog("Options:");
+	PrintAndLog("     [graph buffer data]  - if set, use Graphbuffer otherwise read data from tag.");
 	PrintAndLog("");
 	PrintAndLog("Examples:");
 	PrintAndLog("      lf t55xx info");
@@ -91,36 +114,89 @@ int usage_t55xx_info() {
 	return 0;
 }
 int usage_t55xx_dump(){
-	PrintAndLog("Usage:  lf t55xx dump <password>");
-    PrintAndLog("     <password>, OPTIONAL password 4bytes (8 hex symbols)");
+	PrintAndLog("Usage:  lf t55xx dump <password> [o]");
+	PrintAndLog("Options:");
+	PrintAndLog("     <password>  - OPTIONAL password 4bytes (8 hex symbols)");
+	PrintAndLog("     o           - OPTIONAL override, force pwd read despite danger to card");
 	PrintAndLog("");
 	PrintAndLog("Examples:");
 	PrintAndLog("      lf t55xx dump");
-	PrintAndLog("      lf t55xx dump feedbeef");
+	PrintAndLog("      lf t55xx dump feedbeef o");
 	PrintAndLog("");
 	return 0;
 }
 int usage_t55xx_detect(){
-	PrintAndLog("Usage:  lf t55xx detect");
+	PrintAndLog("Usage:  lf t55xx detect [1] [p <password>]");
+	PrintAndLog("Options:");
+	PrintAndLog("     1             - if set, use Graphbuffer otherwise read data from tag.");
+	PrintAndLog("     p <password>  - OPTIONAL password (8 hex characters)");
 	PrintAndLog("");
 	PrintAndLog("Examples:");
 	PrintAndLog("      lf t55xx detect");
 	PrintAndLog("      lf t55xx detect 1");
+	PrintAndLog("      lf t55xx detect p 11223344");
+	PrintAndLog("");
+	return 0;
+}
+int usage_t55xx_wakup(){
+	PrintAndLog("Usage:  lf t55xx wakeup [h] p <password>");
+	PrintAndLog("This commands send the Answer-On-Request command and leaves the readerfield ON afterwards.");
+	PrintAndLog("Options:");
+	PrintAndLog("     h             - this help");
+	PrintAndLog("     p <password>  - password 4bytes (8 hex symbols)");
+	PrintAndLog("");
+	PrintAndLog("Examples:");
+		PrintAndLog("      lf t55xx wakeup p 11223344  - send wakeup password");
+	return 0;
+}
+int usage_t55xx_bruteforce(){
+	PrintAndLog("This command uses A) bruteforce to scan a number range");
+	PrintAndLog("                  B) a dictionary attack");
+	PrintAndLog("Usage: lf t55xx bruteforce <start password> <end password> [i <*.dic>]");
+	PrintAndLog("       password must be 4 bytes (8 hex symbols)");
+	PrintAndLog("Options:");
+	PrintAndLog("     h           - this help");
+	PrintAndLog("     <start_pwd> - 4 byte hex value to start pwd search at");
+	PrintAndLog("     <end_pwd>   - 4 byte hex value to end pwd search at");
+	PrintAndLog("     i <*.dic>   - loads a default keys dictionary file <*.dic>");
+	PrintAndLog("");
+	PrintAndLog("Examples:");
+	PrintAndLog("       lf t55xx bruteforce aaaaaaaa bbbbbbbb");
+	PrintAndLog("       lf t55xx bruteforce i default_pwd.dic");
 	PrintAndLog("");
 	return 0;
 }
+int usage_t55xx_wipe(){
+	PrintAndLog("Usage:  lf t55xx wipe [h] [Q5]");
+	PrintAndLog("This commands wipes a tag, fills blocks 1-7 with zeros and a default configuration block");
+	PrintAndLog("Options:");
+	PrintAndLog("     h   - this help");
+	PrintAndLog("     Q5  - indicates to use the T5555 (Q5) default configuration block");
+	PrintAndLog("");
+	PrintAndLog("Examples:");
+	PrintAndLog("      lf t55xx wipe    -  wipes a t55x7 tag,    config block 0x000880E0");
+	PrintAndLog("      lf t55xx wipe Q5 -  wipes a t5555 Q5 tag, config block 0x6001F004");
+	return 0;
+}
+
 
 static int CmdHelp(const char *Cmd);
 
+void printT5xxHeader(uint8_t page){
+	PrintAndLog("Reading Page %d:", page);
+	PrintAndLog("blk | hex data | binary");
+	PrintAndLog("----+----------+---------------------------------");	
+}
+
 int CmdT55xxSetConfig(const char *Cmd) {
 
 	uint8_t offset = 0;
-	bool errors = FALSE;
-	uint8_t cmdp = 0;
 	char modulation[5] = {0x00};
 	char tmp = 0x00;
 	uint8_t bitRate = 0;
 	uint8_t rates[9] = {8,16,32,40,50,64,100,128,0};
+	uint8_t cmdp = 0;
+	bool errors = false;
 	while(param_getchar(Cmd, cmdp) != 0x00 && !errors)
 	{
 		tmp = param_getchar(Cmd, cmdp);
@@ -139,7 +215,7 @@ int CmdT55xxSetConfig(const char *Cmd) {
 						break;
 					}
 				}
-				if (i==9) errors = TRUE;
+				if (i==9) errors = true;
 			}
 			cmdp+=2;
 			break;
@@ -147,33 +223,39 @@ int CmdT55xxSetConfig(const char *Cmd) {
 			param_getstr(Cmd, cmdp+1, modulation);
 			cmdp += 2;
 
-			if ( strcmp(modulation, "FSK" ) == 0)
+			if ( strcmp(modulation, "FSK" ) == 0) {
 				config.modulation = DEMOD_FSK;
-			else if ( strcmp(modulation, "FSK1" ) == 0)
+			} else if ( strcmp(modulation, "FSK1" ) == 0) {
 				config.modulation = DEMOD_FSK1;
-			else if ( strcmp(modulation, "FSK1a" ) == 0)
+				config.inverted=1;
+			} else if ( strcmp(modulation, "FSK1a" ) == 0) {
 				config.modulation = DEMOD_FSK1a;
-			else if ( strcmp(modulation, "FSK2" ) == 0)
+				config.inverted=0;
+			} else if ( strcmp(modulation, "FSK2" ) == 0) {
 				config.modulation = DEMOD_FSK2;
-			else if ( strcmp(modulation, "FSK2a" ) == 0)
+				config.inverted=0;
+			} else if ( strcmp(modulation, "FSK2a" ) == 0) {
 				config.modulation = DEMOD_FSK2a;
-			else if ( strcmp(modulation, "ASK" ) == 0)
+				config.inverted=1;
+			} else if ( strcmp(modulation, "ASK" ) == 0) {
 				config.modulation = DEMOD_ASK;
-			else if ( strcmp(modulation, "NRZ" ) == 0)
+			} else if ( strcmp(modulation, "NRZ" ) == 0) {
 				config.modulation = DEMOD_NRZ;
-			else if ( strcmp(modulation, "PSK1" ) == 0)
+			} else if ( strcmp(modulation, "PSK1" ) == 0) {
 				config.modulation = DEMOD_PSK1;
-			else if ( strcmp(modulation, "PSK2" ) == 0)
+			} else if ( strcmp(modulation, "PSK2" ) == 0) {
 				config.modulation = DEMOD_PSK2;
-			else if ( strcmp(modulation, "PSK3" ) == 0)
+			} else if ( strcmp(modulation, "PSK3" ) == 0) {
 				config.modulation = DEMOD_PSK3;
-			else if ( strcmp(modulation, "BIa" ) == 0)
+			} else if ( strcmp(modulation, "BIa" ) == 0) {
 				config.modulation = DEMOD_BIa;
-			else if ( strcmp(modulation, "BI" ) == 0)
+				config.inverted=1;
+			} else if ( strcmp(modulation, "BI" ) == 0) {
 				config.modulation = DEMOD_BI;
-			else {
+				config.inverted=0;
+			} else {
 				PrintAndLog("Unknown modulation '%s'", modulation);
-				errors = TRUE;
+				errors = true;
 			}
 			break;
 		case 'i':
@@ -186,287 +268,374 @@ int CmdT55xxSetConfig(const char *Cmd) {
 				config.offset = offset;
 			cmdp+=2;
 			break;
+		case 'Q':
+		case 'q':		
+			config.Q5 = true;
+			cmdp++;
+			break;
+		case 'S':
+		case 's':		
+			config.ST = true;
+			cmdp++;
+			break;
 		default:
 			PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
-			errors = TRUE;
+			errors = true;
 			break;
 		}
 	}
 
 	// No args
-	if (cmdp == 0) {
-		printConfiguration( config );
-		return 0;
-	}
+	if (cmdp == 0) return printConfiguration( config );
+
 	//Validations
-	if (errors)
-		return usage_t55xx_config();
+	if (errors) return usage_t55xx_config();
 
- 	config.block0 = 0;
- 	printConfiguration ( config );
-	return 0;
+	config.block0 = 0;
+	return printConfiguration ( config );
 }
 
-int CmdT55xxReadBlock(const char *Cmd) {
-	int block = -1;
-	int password = 0xFFFFFFFF; //default to blank Block 7
+int T55xxReadBlock(uint8_t block, bool page1, bool usepwd, bool override, uint32_t password){
+	//Password mode
+	if ( usepwd ) {
+		// try reading the config block and verify that PWD bit is set before doing this!
+		if ( !override ) {
+			if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, false, 0 ) ) return 0;
+			if ( !tryDetectModulation() ) {
+				PrintAndLog("Safety Check: Could not detect if PWD bit is set in config block. Exits.");
+				return 0;
+			} else {
+				PrintAndLog("Safety Check: PWD bit is NOT set in config block. Reading without password...");	
+				usepwd = false;
+				page1 = false;
+			}
+		} else {
+			PrintAndLog("Safety Check Overriden - proceeding despite risk");
+		}
+	}
 
-	char cmdp = param_getchar(Cmd, 0);
-	if (cmdp == 'h' || cmdp == 'H')
-		return usage_t55xx_read();
+	if (!AquireData(page1, block, usepwd, password) )	return 0;
+	if (!DecodeT55xxBlock()) return 0;
 
-	int res = sscanf(Cmd, "%d %x", &block, &password);
+	char blk[10]={0};
+	sprintf(blk,"%d", block);
+	printT55xxBlock(blk);	
+	return 1;
+}
 
-	if ( res < 1 || res > 2 )
-		return usage_t55xx_read();
+int CmdT55xxReadBlock(const char *Cmd) {
+	uint8_t block = REGULAR_READ_MODE_BLOCK;
+	uint32_t password = 0; //default to blank Block 7
+	bool usepwd = false;
+	bool override = false;
+	bool page1 = false;
+	bool errors = false;
+	uint8_t cmdp = 0;
+	while(param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+		switch(param_getchar(Cmd, cmdp)) {
+		case 'h':
+		case 'H':
+			return usage_t55xx_read();
+		case 'b':
+		case 'B':
+			errors |= param_getdec(Cmd, cmdp+1, &block);
+			cmdp += 2;
+			break;
+		case 'o':
+		case 'O':
+			override = true;
+			cmdp++;
+			break;
+		case 'p':
+		case 'P':
+			password = param_get32ex(Cmd, cmdp+1, 0, 16);
+			usepwd = true;
+			cmdp += 2;
+			break;
+		case '1':
+			page1 = true;
+			cmdp++;
+			break;
+		default:
+			PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+			errors = true;
+			break;
+		}
+	}
+	if (errors) return usage_t55xx_read();
 
-	
-	if ((block < 0) | (block > 7)) {
+	if (block > 7 && block != REGULAR_READ_MODE_BLOCK	) {
 		PrintAndLog("Block must be between 0 and 7");
-		return 1;
-	}	
-
-	UsbCommand c = {CMD_T55XX_READ_BLOCK, {0, block, 0}};
- 	c.d.asBytes[0] = 0x0; 
-
-	//Password mode
-	if ( res == 2 ) {
-		c.arg[2] = password;
-		c.d.asBytes[0] = 0x1; 
+		return 0;
 	}
 
-	SendCommand(&c);
-	if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {
-		PrintAndLog("command execution time out");
-		return 2;
-	}
-	
-	uint8_t got[12000];
-	GetFromBigBuf(got,sizeof(got),0);
-	WaitForResponse(CMD_ACK,NULL);
-	setGraphBuf(got, 12000);
-	DemodBufferLen=0;
-	if (!DecodeT55xxBlock()) return 0;
-	char blk[10]={0};
-	sprintf(blk,"%d", block);
-	printT55xxBlock(blk);
-	return 0;
+	printT5xxHeader(page1);
+	return T55xxReadBlock(block, page1, usepwd, override, password);
 }
 
 bool DecodeT55xxBlock(){
 	
-	char buf[8] = {0x00};
+	char buf[30] = {0x00};
 	char *cmdStr = buf;
 	int ans = 0;
+	bool ST = config.ST;
 	uint8_t bitRate[8] = {8,16,32,40,50,64,100,128};
-
 	DemodBufferLen = 0x00;
 
 	switch( config.modulation ){
 		case DEMOD_FSK:
-			//CmdLtrim("26");
-			sprintf(cmdStr,"%d", bitRate[config.bitrate]/2 );
-			CmdLtrim(cmdStr);			
-			sprintf(cmdStr,"%d %d", bitRate[config.bitrate], config.inverted );
-			ans = FSKrawDemod(cmdStr, FALSE);
+			snprintf(cmdStr, sizeof(buf),"%d %d", bitRate[config.bitrate], config.inverted );
+			ans = FSKrawDemod(cmdStr, false);
 			break;
 		case DEMOD_FSK1:
-			//CmdLtrim("26");
-			sprintf(cmdStr,"%d", bitRate[config.bitrate]/2 );
-			CmdLtrim(cmdStr);			
-			sprintf(cmdStr,"%d 1 8 5", bitRate[config.bitrate] );
-			ans = FSKrawDemod(cmdStr, FALSE);
-			break;
 		case DEMOD_FSK1a:
-			//CmdLtrim("26");
-			sprintf(cmdStr,"%d", bitRate[config.bitrate]/2 );
-			CmdLtrim(cmdStr);			
-			sprintf(cmdStr,"%d 0 8 5", bitRate[config.bitrate] );
-			ans = FSKrawDemod(cmdStr, FALSE);
+			snprintf(cmdStr, sizeof(buf),"%d %d 8 5", bitRate[config.bitrate], config.inverted );
+			ans = FSKrawDemod(cmdStr, false);
 			break;
 		case DEMOD_FSK2:
-			//CmdLtrim("26");
-			sprintf(cmdStr,"%d", bitRate[config.bitrate]/2 );
-			CmdLtrim(cmdStr);			
-			sprintf(cmdStr,"%d 0 10 8", bitRate[config.bitrate] );
-			ans = FSKrawDemod(cmdStr, FALSE);
-			break;
 		case DEMOD_FSK2a:
-			//CmdLtrim("26");
-			sprintf(cmdStr,"%d", bitRate[config.bitrate]/2 );
-			CmdLtrim(cmdStr);			
-			sprintf(cmdStr,"%d 1 10 8", bitRate[config.bitrate] );
-			ans = FSKrawDemod(cmdStr, FALSE);
+			snprintf(cmdStr, sizeof(buf),"%d %d 10 8", bitRate[config.bitrate], config.inverted );
+			ans = FSKrawDemod(cmdStr, false);
 			break;
 		case DEMOD_ASK:
-			sprintf(cmdStr,"%d %d 1", bitRate[config.bitrate], config.inverted );
-			ans = ASKmanDemod(cmdStr, FALSE, FALSE);
+			snprintf(cmdStr, sizeof(buf),"%d %d 1", bitRate[config.bitrate], config.inverted );
+			ans = ASKDemod_ext(cmdStr, false, false, 1, &ST);
 			break;
 		case DEMOD_PSK1:
-			sprintf(cmdStr,"%d %d 1", bitRate[config.bitrate], config.inverted );
-			ans = PSKDemod(cmdStr, FALSE);
-			break;
-		case DEMOD_PSK2:
-			sprintf(cmdStr,"%d 1", bitRate[config.bitrate] );
-			ans = PSKDemod(cmdStr, FALSE);
-			psk1TOpsk2(DemodBuffer, DemodBufferLen);
-			break;
-		case DEMOD_PSK3:
-			sprintf(cmdStr,"%d %d 1", bitRate[config.bitrate], config.inverted );
-			ans = PSKDemod(cmdStr, FALSE);
+			// skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)
+			save_restoreGB(1);
+			CmdLtrim("160");
+			snprintf(cmdStr, sizeof(buf),"%d %d 6", bitRate[config.bitrate], config.inverted );
+			ans = PSKDemod(cmdStr, false);
+			//undo trim samples
+			save_restoreGB(0);
+			break;
+		case DEMOD_PSK2: //inverted won't affect this
+		case DEMOD_PSK3: //not fully implemented
+			// skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)
+			save_restoreGB(1);
+			CmdLtrim("160");
+			snprintf(cmdStr, sizeof(buf),"%d 0 6", bitRate[config.bitrate] );
+			ans = PSKDemod(cmdStr, false);
 			psk1TOpsk2(DemodBuffer, DemodBufferLen);
+			//undo trim samples
+			save_restoreGB(0);
 			break;
 		case DEMOD_NRZ:
-			sprintf(cmdStr,"%d %d 1", bitRate[config.bitrate], config.inverted );
-			ans = NRZrawDemod(cmdStr, FALSE);
+			snprintf(cmdStr, sizeof(buf),"%d %d 1", bitRate[config.bitrate], config.inverted );
+			ans = NRZrawDemod(cmdStr, false);
 			break;
 		case DEMOD_BI:
-			sprintf(cmdStr,"0 %d 0 1", bitRate[config.bitrate] );
-			ans = ASKbiphaseDemod(cmdStr, FALSE);
-			break;
 		case DEMOD_BIa:
-			sprintf(cmdStr,"0 %d 1 1", bitRate[config.bitrate] );
-			ans = ASKbiphaseDemod(cmdStr, FALSE);
+			snprintf(cmdStr, sizeof(buf),"0 %d %d 1", bitRate[config.bitrate], config.inverted );
+			ans = ASKbiphaseDemod(cmdStr, false);
 			break;
 		default:
-			return FALSE;
+			return false;
 	}
 	return (bool) ans;
 }
 
+bool DecodeT5555TraceBlock() {
+	DemodBufferLen = 0x00;
+	
+	// According to datasheet. Always: RF/64, not inverted, Manchester
+	return (bool) ASKDemod("64 0 1", false, false, 1);
+}
+
 int CmdT55xxDetect(const char *Cmd){
+	bool errors = false;
+	bool useGB = false;
+	bool usepwd = false;
+	uint32_t password = 0;
+	uint8_t cmdp = 0;
 
-	char cmdp = param_getchar(Cmd, 0);
-	if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H')
-		return usage_t55xx_detect();
+	while(param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+		switch(param_getchar(Cmd, cmdp)) {
+		case 'h':
+		case 'H':
+			return usage_t55xx_detect();
+		case 'p':
+		case 'P':
+			password = param_get32ex(Cmd, cmdp+1, 0, 16);
+			usepwd = true;
+			cmdp += 2;
+			break;
+		case '1':
+			// use Graphbuffer data
+			useGB = true;
+			cmdp++;
+			break;
+		default:
+			PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+			errors = true;
+			break;
+		}
+	}
+	if (errors) return usage_t55xx_detect();
+	
+	if ( !useGB) {
+		if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, usepwd, password) )
+			return 0;
+	}
 	
-	if (strlen(Cmd)==0)
-		AquireData( CONFIGURATION_BLOCK );
-
 	if ( !tryDetectModulation() )
 		PrintAndLog("Could not detect modulation automatically. Try setting it manually with \'lf t55xx config\'");
 
-	return 0;
+	return 1;
 }
 
 // detect configuration?
 bool tryDetectModulation(){
-	char cmdStr[8] = {0};
 	uint8_t hits = 0;
 	t55xx_conf_block_t tests[15];
-	
-	if (GetFskClock("", FALSE, FALSE)){ 
-		uint8_t fc1 = 0, fc2 = 0, clk=0;
-		fskClocks(&fc1, &fc2, &clk, FALSE);
-		sprintf(cmdStr,"%d", clk/2);
-		CmdLtrim(cmdStr);
-		if ( FSKrawDemod("0 0", FALSE) && test(DEMOD_FSK, &tests[hits].offset)){
+	int bitRate=0;
+	uint8_t fc1 = 0, fc2 = 0, clk=0;
+	if (GetFskClock("", false, false)){ 
+		fskClocks(&fc1, &fc2, &clk, false);
+		if ( FSKrawDemod("0 0", false) && test(DEMOD_FSK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
 			tests[hits].modulation = DEMOD_FSK;
 			if (fc1==8 && fc2 == 5)
 				tests[hits].modulation = DEMOD_FSK1a;
-			else if (fc1==10 && fc2 == 8)
+ 			else if (fc1==10 && fc2 == 8)
 				tests[hits].modulation = DEMOD_FSK2;
-
-			tests[hits].inverted = FALSE;
+			tests[hits].bitrate = bitRate;
+			tests[hits].inverted = false;
 			tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
+			tests[hits].ST = false;
 			++hits;
 		}
-		if ( FSKrawDemod("0 1", FALSE) && test(DEMOD_FSK, &tests[hits].offset)) {
+		if ( FSKrawDemod("0 1", false) && test(DEMOD_FSK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
 			tests[hits].modulation = DEMOD_FSK;
-			if (fc1==8 && fc2 == 5)
+			if (fc1 == 8 && fc2 == 5)
 				tests[hits].modulation = DEMOD_FSK1;
-			else if (fc1==10 && fc2 == 8)
+			else if (fc1 == 10 && fc2 == 8)
 				tests[hits].modulation = DEMOD_FSK2a;
-
-			tests[hits].inverted = TRUE;
+			tests[hits].bitrate = bitRate;
+			tests[hits].inverted = true;
 			tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
+			tests[hits].ST = false;
 			++hits;
 		}
 	} else {
-		if ( ASKmanDemod("0 0 1", FALSE, FALSE) && test(DEMOD_ASK, &tests[hits].offset)) {
-			tests[hits].modulation = DEMOD_ASK;
-			tests[hits].inverted = FALSE;
-			tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
-			++hits;
+		clk = GetAskClock("", false, false);
+		if (clk>0) {
+			tests[hits].ST = true;
+			if ( ASKDemod_ext("0 0 1", false, false, 1, &tests[hits].ST) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
+				tests[hits].modulation = DEMOD_ASK;
+				tests[hits].bitrate = bitRate;
+				tests[hits].inverted = false;
+				tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
+				++hits;
 			}
-
-		if ( ASKmanDemod("0 1 1", FALSE, FALSE)  && test(DEMOD_ASK, &tests[hits].offset)) {
-			tests[hits].modulation = DEMOD_ASK;
-			tests[hits].inverted = TRUE;
-			tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
-			++hits;
+			tests[hits].ST = true;
+			if ( ASKDemod_ext("0 1 1", false, false, 1, &tests[hits].ST)  && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
+				tests[hits].modulation = DEMOD_ASK;
+				tests[hits].bitrate = bitRate;
+				tests[hits].inverted = true;
+				tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
+				++hits;
+			}
+			if ( ASKbiphaseDemod("0 0 0 2", false) && test(DEMOD_BI, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) {
+				tests[hits].modulation = DEMOD_BI;
+				tests[hits].bitrate = bitRate;
+				tests[hits].inverted = false;
+				tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
+				tests[hits].ST = false;
+				++hits;
+			}
+			if ( ASKbiphaseDemod("0 0 1 2", false) && test(DEMOD_BIa, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) {
+				tests[hits].modulation = DEMOD_BIa;
+				tests[hits].bitrate = bitRate;
+				tests[hits].inverted = true;
+				tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
+				tests[hits].ST = false;
+				++hits;
 			}
-		
-		if ( NRZrawDemod("0 0 1", FALSE)  && test(DEMOD_NRZ, &tests[hits].offset)) {
-			tests[hits].modulation = DEMOD_NRZ;
-			tests[hits].inverted = FALSE;
-			tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
-			++hits;
 		}
+		//undo trim from ask
+		//save_restoreGB(0);
+		clk = GetNrzClock("", false, false);
+		if (clk>0) {
+			if ( NRZrawDemod("0 0 1", false)  && test(DEMOD_NRZ, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
+				tests[hits].modulation = DEMOD_NRZ;
+				tests[hits].bitrate = bitRate;
+				tests[hits].inverted = false;
+				tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
+				tests[hits].ST = false;
+				++hits;
+			}
 
-		if ( NRZrawDemod("0 1 1", FALSE)  && test(DEMOD_NRZ, &tests[hits].offset)) {
-			tests[hits].modulation = DEMOD_NRZ;
-			tests[hits].inverted = TRUE;
-			tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
-			++hits;
+			if ( NRZrawDemod("0 1 1", false)  && test(DEMOD_NRZ, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
+				tests[hits].modulation = DEMOD_NRZ;
+				tests[hits].bitrate = bitRate;
+				tests[hits].inverted = true;
+				tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
+				tests[hits].ST = false;
+				++hits;
 			}
-		
-		if ( PSKDemod("0 0 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset)) {
-			tests[hits].modulation = DEMOD_PSK1;
-			tests[hits].inverted = FALSE;
-			tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
-			++hits;
 		}
 		
-		if ( PSKDemod("0 1 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset)) {
-			tests[hits].modulation = DEMOD_PSK1;
-			tests[hits].inverted = TRUE;
-			tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
-			++hits;
-		}
-
-		// PSK2 - needs a call to psk1TOpsk2.
-		if ( PSKDemod("0 0 1", FALSE)) {
-			psk1TOpsk2(DemodBuffer, DemodBufferLen);
-			if (test(DEMOD_PSK2, &tests[hits].offset)){
-				tests[hits].modulation = DEMOD_PSK2;
-				tests[hits].inverted = FALSE;
+		// allow undo
+		// skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)
+		save_restoreGB(1);
+		CmdLtrim("160");
+		clk = GetPskClock("", false, false);
+		if (clk>0) {
+			if ( PSKDemod("0 0 6", false) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
+				tests[hits].modulation = DEMOD_PSK1;
+				tests[hits].bitrate = bitRate;
+				tests[hits].inverted = false;
 				tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
+				tests[hits].ST = false;
 				++hits;
 			}
-		} // inverse waves does not affect this demod
-
-		// PSK3 - needs a call to psk1TOpsk2.
-		if ( PSKDemod("0 0 1", FALSE)) {
-			psk1TOpsk2(DemodBuffer, DemodBufferLen);
-			if (test(DEMOD_PSK3, &tests[hits].offset)){
-				tests[hits].modulation = DEMOD_PSK3;
-				tests[hits].inverted = FALSE;
+			if ( PSKDemod("0 1 6", false) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
+				tests[hits].modulation = DEMOD_PSK1;
+				tests[hits].bitrate = bitRate;
+				tests[hits].inverted = true;
 				tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
+				tests[hits].ST = false;
 				++hits;
 			}
-		} // inverse waves does not affect this demod
-	
-		if ( ASKbiphaseDemod("0 0 0 1", FALSE) && test(DEMOD_BI, &tests[hits].offset) ) {
-			tests[hits].modulation = DEMOD_BI;
-			tests[hits].inverted = FALSE;
-			tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
-			++hits;
-		}
-		if ( ASKbiphaseDemod("0 0 1 1", FALSE) && test(DEMOD_BIa, &tests[hits].offset) ) {
-			tests[hits].modulation = DEMOD_BIa;
-			tests[hits].inverted = TRUE;
-			tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
-			++hits;
+			// PSK2 - needs a call to psk1TOpsk2.
+			if ( PSKDemod("0 0 6", false)) {
+				psk1TOpsk2(DemodBuffer, DemodBufferLen);
+				if (test(DEMOD_PSK2, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)){
+					tests[hits].modulation = DEMOD_PSK2;
+					tests[hits].bitrate = bitRate;
+					tests[hits].inverted = false;
+					tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
+					tests[hits].ST = false;
+					++hits;
+				}
+			} // inverse waves does not affect this demod
+			// PSK3 - needs a call to psk1TOpsk2.
+			if ( PSKDemod("0 0 6", false)) {
+				psk1TOpsk2(DemodBuffer, DemodBufferLen);
+				if (test(DEMOD_PSK3, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)){
+					tests[hits].modulation = DEMOD_PSK3;
+					tests[hits].bitrate = bitRate;
+					tests[hits].inverted = false;
+					tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
+					tests[hits].ST = false;
+					++hits;
+				}
+			} // inverse waves does not affect this demod
 		}
-	}		
+		//undo trim samples
+		save_restoreGB(0);
+	}	
 	if ( hits == 1) {
 		config.modulation = tests[0].modulation;
+		config.bitrate = tests[0].bitrate;
 		config.inverted = tests[0].inverted;
 		config.offset = tests[0].offset;
 		config.block0 = tests[0].block0;
+		config.Q5 = tests[0].Q5;
+		config.ST = tests[0].ST;
 		printConfiguration( config );
-		return TRUE;
+		return true;
 	}
 	
 	if ( hits > 1) {
@@ -476,167 +645,172 @@ bool tryDetectModulation(){
 			printConfiguration( tests[i] );
 		}
 	}
-	return FALSE;
+	return false;
 }
 
 bool testModulation(uint8_t mode, uint8_t modread){
 	switch( mode ){
 		case DEMOD_FSK:
-			if (modread > 3 && modread < 8) return TRUE;
+			if (modread >= DEMOD_FSK1 && modread <= DEMOD_FSK2a) return true;
 			break;
 		case DEMOD_ASK:
-			if (modread == DEMOD_ASK) return TRUE;
+			if (modread == DEMOD_ASK) return true;
 			break;
 		case DEMOD_PSK1:
-			if (modread == DEMOD_PSK1) return TRUE;
+			if (modread == DEMOD_PSK1) return true;
 			break;
 		case DEMOD_PSK2:
-			if (modread == DEMOD_PSK2) return TRUE;
+			if (modread == DEMOD_PSK2) return true;
 			break;
 		case DEMOD_PSK3:
-			if (modread == DEMOD_PSK3) return TRUE;
+			if (modread == DEMOD_PSK3) return true;
 			break;
 		case DEMOD_NRZ:
-			if (modread == DEMOD_NRZ) return TRUE;
+			if (modread == DEMOD_NRZ) return true;
 			break;
 		case DEMOD_BI:
-			if (modread == DEMOD_BI) return TRUE;
+			if (modread == DEMOD_BI) return true;
 			break;
 		case DEMOD_BIa:
-			if (modread == DEMOD_BIa) return TRUE;
+			if (modread == DEMOD_BIa) return true;
 			break;		
 		default:
-			return FALSE;
+			return false;
 	}
-	return FALSE;
+	return false;
 }
 
-bool testBitRate(uint8_t readRate, uint8_t mod){
-	uint8_t expected[8] = {8, 16, 32, 40, 50, 64, 100, 128};
-	uint8_t detRate = 0;
-	switch( mod ){
+bool testQ5Modulation(uint8_t	mode, uint8_t	modread){
+	switch( mode ){
 		case DEMOD_FSK:
-			detRate = GetFskClock("",FALSE, FALSE); 
-			if (expected[readRate] == detRate) {
-				config.bitrate = readRate;
-				return TRUE;
-			}
-			break;
-		case DEMOD_FSK1:
-			detRate = GetFskClock("",FALSE, FALSE); 
-			if (expected[readRate] == detRate) {
-				config.bitrate = readRate;
-				return TRUE;
-			}
-			break;
-		case DEMOD_FSK1a:
-			detRate = GetFskClock("",FALSE, FALSE); 
-			if (expected[readRate] == detRate) {
-				config.bitrate = readRate;
-				return TRUE;
-			}
-			break;
-		case DEMOD_FSK2:
-			detRate = GetFskClock("",FALSE, FALSE); 
-			if (expected[readRate] == detRate) {
-				config.bitrate = readRate;
-				return TRUE;
-			}
-			break;
-		case DEMOD_FSK2a:
-			detRate = GetFskClock("",FALSE, FALSE); 
-			if (expected[readRate] == detRate) {
-				config.bitrate = readRate;
-				return TRUE;
-			}
+			if (modread >= 4 && modread <= 5) return true;
 			break;
 		case DEMOD_ASK:
-			detRate = GetAskClock("",FALSE, FALSE); 
-			if (expected[readRate] == detRate) {
-				config.bitrate = readRate;
-				return TRUE;
-			}
+			if (modread == 0) return true;
 			break;
 		case DEMOD_PSK1:
-			detRate = GetPskClock("",FALSE, FALSE); 
-			if (expected[readRate] == detRate) {
-				config.bitrate = readRate;
-				return TRUE;
-			}
+			if (modread == 1) return true;
 			break;
 		case DEMOD_PSK2:
-			detRate = GetPskClock("",FALSE, FALSE); 
-			if (expected[readRate] == detRate) {
-				config.bitrate = readRate;
-				return TRUE;
-			}
+			if (modread == 2) return true;
 			break;
 		case DEMOD_PSK3:
-			detRate = GetPskClock("",FALSE, FALSE); 
-			if (expected[readRate] == detRate) {
-				config.bitrate = readRate;
-				return TRUE;
-			}
+			if (modread == 3) return true;
 			break;
 		case DEMOD_NRZ:
-			detRate = GetNrzClock("",FALSE, FALSE); 
-			if (expected[readRate] == detRate) {
-				config.bitrate = readRate;
-				return TRUE;
-			}
+			if (modread == 7) return true;
 			break;
 		case DEMOD_BI:
-			detRate = GetAskClock("",FALSE, FALSE); 
-			if (expected[readRate] == detRate) {
-				config.bitrate = readRate;
-				return TRUE;
-			}
+			if (modread == 6) return true;
 			break;
 		default:
-			return FALSE;
+			return false;
+	}
+	return false;
+}
+
+int convertQ5bitRate(uint8_t bitRateRead) {
+	uint8_t expected[] = {8, 16, 32, 40, 50, 64, 100, 128};
+	for (int i=0; i<8; i++)
+		if (expected[i] == bitRateRead)
+			return i;
+
+	return -1;
+}
+
+bool testQ5(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t	clk){
+
+	if ( DemodBufferLen < 64 ) return false;
+	uint8_t si = 0;
+	for (uint8_t idx = 28; idx < 64; idx++){
+		si = idx;
+		if ( PackBits(si, 28, DemodBuffer) == 0x00 ) continue;
+
+		uint8_t safer     = PackBits(si, 4, DemodBuffer); si += 4;     //master key
+		uint8_t resv      = PackBits(si, 8, DemodBuffer); si += 8;
+		// 2nibble must be zeroed.
+		if (safer != 0x6 && safer != 0x9) continue;
+		if ( resv > 0x00) continue;
+		//uint8_t	pageSel   = PackBits(si, 1, DemodBuffer); si += 1;
+		//uint8_t fastWrite = PackBits(si, 1, DemodBuffer); si += 1;
+		si += 1+1;
+		int bitRate       = PackBits(si, 6, DemodBuffer)*2 + 2; si += 6;     //bit rate
+		if (bitRate > 128 || bitRate < 8) continue;
+
+		//uint8_t AOR       = PackBits(si, 1, DemodBuffer); si += 1;   
+		//uint8_t PWD       = PackBits(si, 1, DemodBuffer); si += 1; 
+		//uint8_t pskcr     = PackBits(si, 2, DemodBuffer); si += 2;  //could check psk cr
+		//uint8_t inverse   = PackBits(si, 1, DemodBuffer); si += 1;
+		si += 1+1+2+1;
+		uint8_t modread   = PackBits(si, 3, DemodBuffer); si += 3;
+		uint8_t maxBlk    = PackBits(si, 3, DemodBuffer); si += 3;
+		//uint8_t ST        = PackBits(si, 1, DemodBuffer); si += 1;
+		if (maxBlk == 0) continue;
+		//test modulation
+		if (!testQ5Modulation(mode, modread)) continue;
+		if (bitRate != clk) continue;
+		*fndBitRate = convertQ5bitRate(bitRate);
+		if (*fndBitRate < 0) continue;
+		*offset = idx;
+
+		return true;
 	}
-	return FALSE;
+	return false;
 }
 
-bool test(uint8_t mode, uint8_t *offset){
+bool testBitRate(uint8_t readRate, uint8_t clk){
+	uint8_t expected[] = {8, 16, 32, 40, 50, 64, 100, 128};
+	if (expected[readRate] == clk)
+		return true;
 
-	if ( !DemodBufferLen) return FALSE;
+	return false;
+}
+
+bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5){
+
+	if ( DemodBufferLen < 64 ) return false;
 	uint8_t si = 0;
-	for (uint8_t idx = 0; idx < 64; idx++){
+	for (uint8_t idx = 28; idx < 64; idx++){
 		si = idx;
-		if ( PackBits(si, 32, DemodBuffer) == 0x00 ) continue;
+		if ( PackBits(si, 28, DemodBuffer) == 0x00 ) continue;
 
-		uint8_t safer    = PackBits(si, 4, DemodBuffer); si += 4;	    //master key
+		uint8_t safer    = PackBits(si, 4, DemodBuffer); si += 4;     //master key
 		uint8_t resv     = PackBits(si, 4, DemodBuffer); si += 4;     //was 7 & +=7+3 //should be only 4 bits if extended mode
 		// 2nibble must be zeroed.
 		// moved test to here, since this gets most faults first.
 		if ( resv > 0x00) continue;
 
-		uint8_t xtRate   = PackBits(si, 3, DemodBuffer); si += 3;   //new
-		uint8_t bitRate  = PackBits(si, 3, DemodBuffer); si += 3;   //new  could check bit rate
+		uint8_t xtRate   = PackBits(si, 3, DemodBuffer); si += 3;     //extended mode part of rate
+		int bitRate      = PackBits(si, 3, DemodBuffer); si += 3;     //bit rate
+		if (bitRate > 7) continue;
 		uint8_t extend   = PackBits(si, 1, DemodBuffer); si += 1;     //bit 15 extended mode
-		uint8_t modread  = PackBits(si, 5, DemodBuffer); si += 5+2+1; //new
-		//uint8_t pskcr   = PackBits(si, 2, DemodBuffer); si += 2+1;  //new  could check psk cr
-		uint8_t nml01    = PackBits(si, 1, DemodBuffer); si += 1+5;   //bit 24 , 30, 31 could be tested for 0 if not extended mode
-		uint8_t nml02    = PackBits(si, 2, DemodBuffer); si += 2;
+		uint8_t modread  = PackBits(si, 5, DemodBuffer); si += 5+2+1; 
+		//uint8_t pskcr   = PackBits(si, 2, DemodBuffer); si += 2+1;  //could check psk cr
+		//uint8_t nml01    = PackBits(si, 1, DemodBuffer); si += 1+5;   //bit 24, 30, 31 could be tested for 0 if not extended mode
+		//uint8_t nml02    = PackBits(si, 2, DemodBuffer); si += 2;
 		
 		//if extended mode
-		bool extMode =( (safer == 0x6 || safer == 0x9) && extend) ? TRUE : FALSE;
+		bool extMode =( (safer == 0x6 || safer == 0x9) && extend) ? true : false;
 
 		if (!extMode){
-			if (nml01 || nml02 || xtRate) continue;
+			if (xtRate) continue;  //nml01 || nml02 ||  caused issues on noralys tags
 		}
 		//test modulation
 		if (!testModulation(mode, modread)) continue;
-
+		if (!testBitRate(bitRate, clk)) continue;
+		*fndBitRate = bitRate;
 		*offset = idx;
-		if (!testBitRate(bitRate, mode)) continue;
-		return TRUE;
+		*Q5 = false;
+		return true;
 	}
-	return FALSE;
+	if (testQ5(mode, offset, fndBitRate, clk)) {
+		*Q5 = true;
+		return true;
+	}
+	return false;
 }
 
-void printT55xxBlock(const char *demodStr){
+void printT55xxBlock(const char *blockNum){
 	
 	uint8_t i = config.offset;
 	uint8_t endpos = 32 + i;
@@ -654,14 +828,15 @@ void printT55xxBlock(const char *demodStr){
 		bits[i - config.offset]=DemodBuffer[i];
 
 	blockData = PackBits(0, 32, bits);
-	PrintAndLog("0x%08X  %s [%s]", blockData, sprint_bin(bits,32), demodStr);
+
+	PrintAndLog("  %s | %08X | %s", blockNum, blockData, sprint_bin(bits,32));
 }
 
 int special(const char *Cmd) {
 	uint32_t blockData = 0;
 	uint8_t bits[32] = {0x00};
 
-	PrintAndLog("[OFFSET] [DATA] [BINARY]");
+	PrintAndLog("OFFSET | DATA       | BINARY");
 	PrintAndLog("----------------------------------------------------");
 	int i,j = 0;
 	for (; j < 64; ++j){
@@ -671,113 +846,236 @@ int special(const char *Cmd) {
 	
 		blockData = PackBits(0, 32, bits);
 		
-		PrintAndLog("[%02d] 0x%08X  %s",j , blockData, sprint_bin(bits,32));	
+		PrintAndLog("    %02d | 0x%08X | %s",j , blockData, sprint_bin(bits,32));	
 	}
 	return 0;
 }
 
-void printConfiguration( t55xx_conf_block_t b){
+int printConfiguration( t55xx_conf_block_t b){
+	PrintAndLog("Chip Type  : %s", (b.Q5) ? "T5555(Q5)" : "T55x7");
 	PrintAndLog("Modulation : %s", GetSelectedModulationStr(b.modulation) );
 	PrintAndLog("Bit Rate   : %s", GetBitRateStr(b.bitrate) );
 	PrintAndLog("Inverted   : %s", (b.inverted) ? "Yes" : "No" );
 	PrintAndLog("Offset     : %d", b.offset);
+	PrintAndLog("Seq. Term. : %s", (b.ST) ? "Yes" : "No" );
 	PrintAndLog("Block0     : 0x%08X", b.block0);
 	PrintAndLog("");
+	return 0;
 }
 
-int CmdT55xxWriteBlock(const char *Cmd)
-{
-	int block = 8; //default to invalid block
-	int data = 0xFFFFFFFF; //default to blank Block 
-	int password = 0xFFFFFFFF; //default to blank Block 7
-	
-	char cmdp = param_getchar(Cmd, 0);
-	if (cmdp == 'h' || cmdp == 'H') {
-		usage_t55xx_write();
-		return 0;
+int CmdT55xxWakeUp(const char *Cmd) {
+	uint32_t password = 0;
+	uint8_t cmdp = 0;
+	bool errors = true;
+	while(param_getchar(Cmd, cmdp) != 0x00) {
+		switch(param_getchar(Cmd, cmdp)) {
+		case 'h':
+		case 'H':
+			return usage_t55xx_wakup();
+		case 'p':
+		case 'P':
+			password = param_get32ex(Cmd, cmdp+1, 0xFFFFFFFF, 16);
+			cmdp += 2;
+			errors = false;
+			break;
+		default:
+			PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+			errors = true;
+			break;
+		}
 	}
-  
-	int res = sscanf(Cmd, "%d %x %x",&block, &data, &password);
-	
-	if ( res < 2 || res > 3) {
-		usage_t55xx_write();
-		return 1;
+	if (errors) return usage_t55xx_wakup();
+
+	UsbCommand c = {CMD_T55XX_WAKEUP, {password, 0, 0}};
+	clearCommandBuffer();
+	SendCommand(&c);
+	PrintAndLog("Wake up command sent. Try read now");
+	return 0;
+}
+
+int CmdT55xxWriteBlock(const char *Cmd) {
+	uint8_t block = 0xFF; //default to invalid block
+	uint32_t data = 0; //default to blank Block 
+	uint32_t password = 0; //default to blank Block 7
+	bool usepwd = false;
+	bool page1 = false;	
+	bool gotdata = false;
+	bool errors = false;
+	uint8_t cmdp = 0;
+	while(param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+		switch(param_getchar(Cmd, cmdp)) {
+		case 'h':
+		case 'H':
+			return usage_t55xx_write();
+		case 'b':
+		case 'B':
+			errors |= param_getdec(Cmd, cmdp+1, &block);
+			cmdp += 2;
+			break;
+		case 'd':
+		case 'D':
+			data = param_get32ex(Cmd, cmdp+1, 0, 16);
+			gotdata	= true;
+			cmdp += 2;
+			break;
+		case 'p':
+		case 'P':
+			password = param_get32ex(Cmd, cmdp+1, 0, 16);
+			usepwd = true;
+			cmdp += 2;
+			break;
+		case '1':
+			page1 = true;
+			cmdp++;
+			break;
+		default:
+			PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+			errors = true;
+			break;
+		}
 	}
+	if (errors || !gotdata) return usage_t55xx_write();
 
 	if (block > 7) {
 		PrintAndLog("Block number must be between 0 and 7");
-		return 1;
+		return 0;
 	}
 	
 	UsbCommand c = {CMD_T55XX_WRITE_BLOCK, {data, block, 0}};
- 	c.d.asBytes[0] = 0x0; 
+	UsbCommand resp;
+ 	c.d.asBytes[0] = (page1) ? 0x2 : 0; 
+
+	char pwdStr[16] = {0};
+	snprintf(pwdStr, sizeof(pwdStr), "pwd: 0x%08X", password);
 
-	PrintAndLog("Writing to block: %d  data  : 0x%08X", block, data);
+	PrintAndLog("Writing page %d  block: %02d  data: 0x%08X %s", page1, block, data,  (usepwd) ? pwdStr : "" );
 
 	//Password mode
-	if (res == 3) {
+	if (usepwd) {
 		c.arg[2] = password;
-		c.d.asBytes[0] = 0x1; 
-		PrintAndLog("pwd   : 0x%08X", password);
+		c.d.asBytes[0] |= 0x1; 
 	}
+	clearCommandBuffer();
 	SendCommand(&c);
-	return 0;
+	if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){
+		PrintAndLog("Error occurred, device did not ACK write operation. (May be due to old firmware)");
+		return 0;
+	}
+	return 1;
 }
 
-int CmdT55xxReadTrace(const char *Cmd)
-{
+int CmdT55xxReadTrace(const char *Cmd) {
 	char cmdp = param_getchar(Cmd, 0);
-	
+	bool pwdmode = false;
+	uint32_t password = 0;
 	if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') 
 		return usage_t55xx_trace();
 
 	if (strlen(Cmd)==0)
-		AquireData( TRACE_BLOCK );
-	
-	if (!DecodeT55xxBlock()) return 1;
+		if ( !AquireData( T55x7_PAGE1, REGULAR_READ_MODE_BLOCK, pwdmode, password ) )
+			return 0;
+
+	if ( config.Q5 ) {
+		if (!DecodeT5555TraceBlock()) return 0;
+	} else {
+		if (!DecodeT55xxBlock()) return 0;
+	}
+
+	if ( !DemodBufferLen ) return 0;
 
-	if ( !DemodBufferLen) return 1;
-	
 	RepaintGraphWindow();
-	uint8_t repeat = 0;
-	if (config.offset > 5) 
-		repeat = 32;
+	uint8_t repeat = (config.offset > 5) ? 32 : 0;
+
 	uint8_t si = config.offset+repeat;
-	uint32_t bl0     = PackBits(si, 32, DemodBuffer);
-	uint32_t bl1     = PackBits(si+32, 32, DemodBuffer);
-	
-	uint32_t acl     = PackBits(si,  8, DemodBuffer); si += 8;
-	uint32_t mfc     = PackBits(si, 8, DemodBuffer); si += 8;
-	uint32_t cid     = PackBits(si, 5, DemodBuffer); si += 5;
-	uint32_t icr     = PackBits(si, 3, DemodBuffer); si += 3;
-	uint32_t year    = PackBits(si, 4, DemodBuffer); si += 4;
-	uint32_t quarter = PackBits(si, 2, DemodBuffer); si += 2;
-	uint32_t lotid    = PackBits(si, 12, DemodBuffer); si += 12;
-	uint32_t wafer   = PackBits(si, 5, DemodBuffer); si += 5;
-	uint32_t dw      = PackBits(si, 15, DemodBuffer); 
-	
-	year += 2000;
-	
-	PrintAndLog("");
-	PrintAndLog("-- T55xx Trace Information ----------------------------------");
+	uint32_t bl1     = PackBits(si, 32, DemodBuffer);
+	uint32_t bl2     = PackBits(si+32, 32, DemodBuffer);
+
+	if (config.Q5) {
+		uint32_t hdr = PackBits(si, 9,  DemodBuffer); si += 9;
+
+		if (hdr != 0x1FF) {
+			PrintAndLog("Invalid Q5 Trace data header (expected 0x1FF, found %X)", hdr);
+			return 0;
+		}
+
+		t5555_tracedata_t data = {.bl1 = bl1, .bl2 = bl2, .icr = 0, .lotidc = '?', .lotid = 0, .wafer = 0, .dw =0};
+
+		data.icr     = PackBits(si, 2,  DemodBuffer); si += 2;
+		data.lotidc  = 'Z' - PackBits(si, 2,  DemodBuffer); si += 3;
+
+		data.lotid   = PackBits(si, 4,  DemodBuffer); si += 5;
+		data.lotid <<= 4;
+		data.lotid  |= PackBits(si, 4,  DemodBuffer); si += 5;
+		data.lotid <<= 4;
+		data.lotid  |= PackBits(si, 4,  DemodBuffer); si += 5;
+		data.lotid <<= 4;
+		data.lotid  |= PackBits(si, 4,  DemodBuffer); si += 5;
+		data.lotid <<= 1;
+		data.lotid  |= PackBits(si, 1,  DemodBuffer); si += 1;
+
+		data.wafer   = PackBits(si, 3,  DemodBuffer); si += 4;
+		data.wafer <<= 2;
+		data.wafer  |= PackBits(si, 2,  DemodBuffer); si += 2;
+
+		data.dw      = PackBits(si, 2,  DemodBuffer); si += 3;
+		data.dw    <<= 4;
+		data.dw     |= PackBits(si, 4,  DemodBuffer); si += 5;
+		data.dw    <<= 4;
+		data.dw     |= PackBits(si, 4,  DemodBuffer); si += 5;
+		data.dw    <<= 4;
+		data.dw     |= PackBits(si, 4,  DemodBuffer); si += 5;
+
+		printT5555Trace(data, repeat);
+
+	} else {
+
+		t55x7_tracedata_t data = {.bl1 = bl1, .bl2 = bl2, .acl = 0, .mfc = 0, .cid = 0, .year = 0, .quarter = 0, .icr = 0,  .lotid = 0, .wafer = 0, .dw = 0};
+		
+		data.acl = PackBits(si, 8,  DemodBuffer); si += 8;
+		if ( data.acl != 0xE0 ) {
+			PrintAndLog("The modulation is most likely wrong since the ACL is not 0xE0. ");
+			return 0;
+		}
+
+		data.mfc     = PackBits(si, 8,  DemodBuffer); si += 8;
+		data.cid     = PackBits(si, 5,  DemodBuffer); si += 5;
+		data.icr     = PackBits(si, 3,  DemodBuffer); si += 3;
+		data.year    = PackBits(si, 4,  DemodBuffer); si += 4;
+		data.quarter = PackBits(si, 2,  DemodBuffer); si += 2;
+		data.lotid   = PackBits(si, 14, DemodBuffer); si += 14;
+		data.wafer   = PackBits(si, 5,  DemodBuffer); si += 5;
+		data.dw      = PackBits(si, 15, DemodBuffer); 
+
+		time_t t = time(NULL);
+		struct tm tm = *localtime(&t);
+		if ( data.year > tm.tm_year-110)
+			data.year += 2000;
+		else
+			data.year += 2010;
+
+		printT55x7Trace(data, repeat);
+	}
+	return 0;
+}
+
+void printT55x7Trace( t55x7_tracedata_t data, uint8_t repeat ){
+	PrintAndLog("-- T55x7 Trace Information ----------------------------------");
 	PrintAndLog("-------------------------------------------------------------");
-	PrintAndLog(" ACL Allocation class (ISO/IEC 15963-1)  : 0x%02X (%d)", acl, acl);
-	PrintAndLog(" MFC Manufacturer ID (ISO/IEC 7816-6)    : 0x%02X (%d) - %s", mfc, mfc, getTagInfo(mfc));
-	PrintAndLog(" CID                                     : 0x%02X (%d) - %s", cid, cid, GetModelStrFromCID(cid));
-	PrintAndLog(" ICR IC Revision                         : %d",icr );
+	PrintAndLog(" ACL Allocation class (ISO/IEC 15963-1)  : 0x%02X (%d)", data.acl, data.acl);
+	PrintAndLog(" MFC Manufacturer ID (ISO/IEC 7816-6)    : 0x%02X (%d) - %s", data.mfc, data.mfc, getTagInfo(data.mfc));
+	PrintAndLog(" CID                                     : 0x%02X (%d) - %s", data.cid, data.cid, GetModelStrFromCID(data.cid));
+	PrintAndLog(" ICR IC Revision                         : %d", data.icr );
 	PrintAndLog(" Manufactured");
-	PrintAndLog("     Year/Quarter : %d/%d",year, quarter );
-	PrintAndLog("     Lot ID       : %d", lotid );
-	PrintAndLog("     Wafer number : %d", wafer);
-	PrintAndLog("     Die Number   : %d", dw);
+	PrintAndLog("     Year/Quarter : %d/%d", data.year, data.quarter);
+	PrintAndLog("     Lot ID       : %d", data.lotid );
+	PrintAndLog("     Wafer number : %d", data.wafer);
+	PrintAndLog("     Die Number   : %d", data.dw);
 	PrintAndLog("-------------------------------------------------------------");
 	PrintAndLog(" Raw Data - Page 1");
-	PrintAndLog("     Block 0  : 0x%08X  %s", bl0, sprint_bin(DemodBuffer+config.offset+repeat,32) );
-	PrintAndLog("     Block 1  : 0x%08X  %s", bl1, sprint_bin(DemodBuffer+config.offset+repeat+32,32) );
-	PrintAndLog("-------------------------------------------------------------");
+	PrintAndLog("     Block 1  : 0x%08X  %s", data.bl1, sprint_bin(DemodBuffer+config.offset+repeat,32) );
+	PrintAndLog("     Block 2  : 0x%08X  %s", data.bl2, sprint_bin(DemodBuffer+config.offset+repeat+32,32) );
+	PrintAndLog("-------------------------------------------------------------");	
 
-	if ( acl != 0xE0 )
-		PrintAndLog("The modulation is most likely wrong since the ACL is not 0xE0. ");
 	/*
 	TRACE - BLOCK O
 		Bits	Definition								HEX
@@ -794,27 +1092,57 @@ int CmdT55xxReadTrace(const char *Cmd)
 		13-17	Wafer number
 		18-32	DW,  die number sequential
 	*/
+}
+
+void printT5555Trace( t5555_tracedata_t data, uint8_t repeat ){
+	PrintAndLog("-- T5555 (Q5) Trace Information -----------------------------");
+	PrintAndLog("-------------------------------------------------------------");
+	PrintAndLog(" ICR IC Revision  : %d", data.icr );	
+	PrintAndLog("     Lot          : %c%d", data.lotidc, data.lotid);
+	PrintAndLog("     Wafer number : %d", data.wafer);
+	PrintAndLog("     Die Number   : %d", data.dw);
+	PrintAndLog("-------------------------------------------------------------");
+	PrintAndLog(" Raw Data - Page 1");
+	PrintAndLog("     Block 1  : 0x%08X  %s", data.bl1, sprint_bin(DemodBuffer+config.offset+repeat,32) );
+	PrintAndLog("     Block 2  : 0x%08X  %s", data.bl2, sprint_bin(DemodBuffer+config.offset+repeat+32,32) );
 	
-  return 0;
+	/*
+		** Q5 **
+		TRACE - BLOCK O and BLOCK1
+		Bits	Definition				HEX
+		1-9		Header                  0x1FF
+		10-11 IC Revision
+		12-13 Lot ID char
+		15-35 Lot ID (NB parity)
+		36-41 Wafer number (NB parity)
+		42-58 DW, die number sequential (NB parity)
+		60-63 Parity bits
+		64    Always zero
+	*/
 }
 
+//need to add Q5 info...
 int CmdT55xxInfo(const char *Cmd){
 	/*
 		Page 0 Block 0 Configuration data.
 		Normal mode
 		Extended mode
 	*/
+	bool pwdmode = false;
+	uint32_t password = 0;
 	char cmdp = param_getchar(Cmd, 0);
 
 	if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H')
 		return usage_t55xx_info();
 	
 	if (strlen(Cmd)==0)
-		AquireData( CONFIGURATION_BLOCK );
-	
+		if ( !AquireData( T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, pwdmode, password ) )
+			return 1;
+
 	if (!DecodeT55xxBlock()) return 1;
 
-	if ( !DemodBufferLen) return 1;
+	// too little space to start with
+	if ( DemodBufferLen < 32) return 1;
 
 	uint8_t si = config.offset;
 	uint32_t bl0      = PackBits(si, 32, DemodBuffer);
@@ -833,9 +1161,10 @@ int CmdT55xxInfo(const char *Cmd){
 	uint32_t fw       = PackBits(si, 1, DemodBuffer); si += 1;
 	uint32_t inv      = PackBits(si, 1, DemodBuffer); si += 1;	
 	uint32_t por      = PackBits(si, 1, DemodBuffer); si += 1;
-		
+	
+	if (config.Q5) PrintAndLog("*** Warning *** Config Info read off a Q5 will not display as expected");
 	PrintAndLog("");
-	PrintAndLog("-- T55xx Configuration & Tag Information --------------------");
+	PrintAndLog("-- T55x7 Configuration & Tag Information --------------------");
 	PrintAndLog("-------------------------------------------------------------");
 	PrintAndLog(" Safer key                 : %s", GetSaferStr(safer));
 	PrintAndLog(" reserved                  : %d", resv);
@@ -861,162 +1190,101 @@ int CmdT55xxInfo(const char *Cmd){
 
 int CmdT55xxDump(const char *Cmd){
 
-	char s[20] = {0x00};
-	uint8_t pwd[4] = {0x00};
-
+	uint32_t password = 0;
 	char cmdp = param_getchar(Cmd, 0);
-	if ( cmdp == 'h' || cmdp == 'H') {
-		usage_t55xx_dump();
-		return 0;
-	}
-
-	bool hasPwd = ( strlen(Cmd) > 0);	
-	if ( hasPwd ){
-		if (param_gethex(Cmd, 0, pwd, 8)) {
-			PrintAndLog("password must include 8 HEX symbols");
-			return 1;
-		}
+	bool override = false;
+	if ( cmdp == 'h' || cmdp == 'H') return usage_t55xx_dump();
+
+	bool usepwd = ( strlen(Cmd) > 0);	
+	if ( usepwd ){
+		password = param_get32ex(Cmd, 0, 0, 16);
+		if (param_getchar(Cmd, 1) =='o' )
+			override = true;
 	}
 	
-	for ( int i = 0; i <8; ++i){
-		memset(s,0,sizeof(s));
-		if ( hasPwd ) {
-			sprintf(s,"%d %02x%02x%02x%02x", i, pwd[0],pwd[1],pwd[2],pwd[3]);
-		} else {
-			sprintf(s,"%d", i);
-		}
-		CmdT55xxReadBlock(s);
-	}
-	return 0;
-}
+	printT5xxHeader(0);
+	for ( uint8_t i = 0; i <8; ++i)
+		T55xxReadBlock(i, 0, usepwd, override, password);
 
-int AquireData( uint8_t block ){
+	printT5xxHeader(1);
+	for ( uint8_t	i = 0; i<4; i++)
+		T55xxReadBlock(i, 1, usepwd, override, password);		
 
-	UsbCommand c;
-	
-	if ( block == CONFIGURATION_BLOCK ) 
-		c.cmd = CMD_T55XX_READ_BLOCK;
-	else if (block == TRACE_BLOCK )
-		c.cmd = CMD_T55XX_READ_TRACE;
-		
-	c.arg[0] = 0x00;
-	c.arg[1] = 0x00;
-	c.arg[2] = 0x00;
-	c.d.asBytes[0] = 0x0; 
+	return 1;
+}
 
-	//Password mode
-	// if ( res == 2 ) {
-		// c.arg[2] = password;
-		// c.d.asBytes[0] = 0x1; 
-	// }
+int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password ){
+	// arg0 bitmodes:
+	// bit0 = pwdmode
+	// bit1 = page to read from
+	uint8_t arg0 = (page<<1) | pwdmode;
+	UsbCommand c = {CMD_T55XX_READ_BLOCK, {arg0, block, password}};
 
+	clearCommandBuffer();
 	SendCommand(&c);
 	if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {
 		PrintAndLog("command execution time out");
-		return 1;
+		return 0;
 	}
 
 	uint8_t got[12000];
 	GetFromBigBuf(got,sizeof(got),0);
 	WaitForResponse(CMD_ACK,NULL);
-	setGraphBuf(got, 12000);
-	return 0;
+	setGraphBuf(got, sizeof(got));
+	return 1;
 }
 
-char * GetBitRateStr(uint32_t id){
- 	static char buf[40];
-	char *retStr = buf;
-		switch (id){
-		case 0: 
-			sprintf(retStr,"%d - RF/8",id);
-			break;
-		case 1:
-			sprintf(retStr,"%d - RF/16",id);
-			break;
-		case 2:		
-			sprintf(retStr,"%d - RF/32",id);
-			break;
-		case 3:
-			sprintf(retStr,"%d - RF/40",id);
-			break;
-		case 4:
-			sprintf(retStr,"%d - RF/50",id);
-			break;
-		case 5:
-			sprintf(retStr,"%d - RF/64",id);
-			break;
-		case 6:
-			sprintf(retStr,"%d - RF/100",id);
-			break;
-		case 7:
-			sprintf(retStr,"%d - RF/128",id);
-			break;
-		default:
-			sprintf(retStr,"%d - (Unknown)",id);
-			break;
-		}
+char * GetBitRateStr(uint32_t id) {
+	static char buf[25];
 
+	char *retStr = buf;
+	switch (id) {
+		case 0:   snprintf(retStr,sizeof(buf),"%d - RF/8",id);   break;
+		case 1:   snprintf(retStr,sizeof(buf),"%d - RF/16",id);  break;
+		case 2:   snprintf(retStr,sizeof(buf),"%d - RF/32",id);  break;
+		case 3:   snprintf(retStr,sizeof(buf),"%d - RF/40",id);  break;
+		case 4:   snprintf(retStr,sizeof(buf),"%d - RF/50",id);  break;
+		case 5:   snprintf(retStr,sizeof(buf),"%d - RF/64",id);  break;
+		case 6:   snprintf(retStr,sizeof(buf),"%d - RF/100",id); break;
+		case 7:   snprintf(retStr,sizeof(buf),"%d - RF/128",id); break;
+		default:  snprintf(retStr,sizeof(buf),"%d - (Unknown)",id); break;
+	}
 	return buf;
 }
 
-char * GetSaferStr(uint32_t id){
+char * GetSaferStr(uint32_t id) {
 	static char buf[40];
 	char *retStr = buf;
 	
-	sprintf(retStr,"%d",id);
+	snprintf(retStr,sizeof(buf),"%d",id);
 	if (id == 6) {
-		sprintf(retStr,"%d - passwd",id);
+		snprintf(retStr,sizeof(buf),"%d - passwd",id);
 	}
 	if (id == 9 ){
-		sprintf(retStr,"%d - testmode",id);
+		snprintf(retStr,sizeof(buf),"%d - testmode",id);
 	}
 	
 	return buf;
 }
+
 char * GetModulationStr( uint32_t id){
-	static char buf[40];
+	static char buf[60];
 	char *retStr = buf;
 	
 	switch (id){
-		case 0: 
-			sprintf(retStr,"%d - DIRECT (ASK/NRZ)",id);
-			break;
-		case 1:
-			sprintf(retStr,"%d - PSK 1 phase change when input changes",id);
-			break;
-		case 2:		
-			sprintf(retStr,"%d - PSK 2 phase change on bitclk if input high",id);
-			break;
-		case 3:
-			sprintf(retStr,"%d - PSK 3 phase change on rising edge of input",id);
-			break;
-		case 4:
-			sprintf(retStr,"%d - FSK 1 RF/8  RF/5",id);
-			break;
-		case 5:
-			sprintf(retStr,"%d - FSK 2 RF/8  RF/10",id);
-			break;
-		case 6:
-			sprintf(retStr,"%d - FSK 1a RF/5  RF/8",id);
-			break;
-		case 7:
-			sprintf(retStr,"%d - FSK 2a RF/10  RF/8",id);
-			break;
-		case 8:
-			sprintf(retStr,"%d - Manschester",id);
-			break;
-		case 16:
-			sprintf(retStr,"%d - Biphase",id);
-			break;
-		case 0x18:
-			sprintf(retStr,"%d - Biphase a",id);
-			break;
-		case 17:
-			sprintf(retStr,"%d - Reserved",id);
-			break;
-		default:
-			sprintf(retStr,"0x%02X (Unknown)",id);
-			break;
+		case 0: snprintf(retStr,sizeof(buf),"%d - DIRECT (ASK/NRZ)",id); break;
+		case 1: snprintf(retStr,sizeof(buf),"%d - PSK 1 phase change when input changes",id); break;
+		case 2:	snprintf(retStr,sizeof(buf),"%d - PSK 2 phase change on bitclk if input high",id); break;
+		case 3: snprintf(retStr,sizeof(buf),"%d - PSK 3 phase change on rising edge of input",id); break;
+		case 4: snprintf(retStr,sizeof(buf),"%d - FSK 1 RF/8  RF/5",id); break;
+		case 5: snprintf(retStr,sizeof(buf),"%d - FSK 2 RF/8  RF/10",id); break;
+		case 6: snprintf(retStr,sizeof(buf),"%d - FSK 1a RF/5  RF/8",id); break;
+		case 7: snprintf(retStr,sizeof(buf),"%d - FSK 2a RF/10  RF/8",id); break;
+		case 8: snprintf(retStr,sizeof(buf),"%d - Manchester",id); break;
+		case 16: snprintf(retStr,sizeof(buf),"%d - Biphase",id); break;
+		case 0x18: snprintf(retStr,sizeof(buf),"%d - Biphase a - AKA Conditional Dephase Encoding(CDP)",id); break;
+		case 17: snprintf(retStr,sizeof(buf),"%d - Reserved",id); break;
+		default: snprintf(retStr,sizeof(buf),"0x%02X (Unknown)",id); break;
 		}
 	return buf;
 }
@@ -1026,57 +1294,31 @@ char * GetModelStrFromCID(uint32_t cid){
 	static char buf[10];
 	char *retStr = buf;
 	
-	if (cid == 1) sprintf(retStr,"ATA5577M1");
-	if (cid == 2) sprintf(retStr,"ATA5577M2");	
+	if (cid == 1) snprintf(retStr, sizeof(buf),"ATA5577M1");
+	if (cid == 2) snprintf(retStr, sizeof(buf),"ATA5577M2");	
 	return buf;
 }
 
 char * GetSelectedModulationStr( uint8_t id){
 
-	static char buf[16];
+	static char buf[20];
 	char *retStr = buf;
 
-	switch (id){
-		case DEMOD_FSK:
-			sprintf(retStr,"FSK");
-			break;
-		case DEMOD_FSK1:
-			sprintf(retStr,"FSK1");
-			break;
-		case DEMOD_FSK1a:
-			sprintf(retStr,"FSK1a");
-			break;
-		case DEMOD_FSK2:
-			sprintf(retStr,"FSK2");
-			break;
-		case DEMOD_FSK2a:
-			sprintf(retStr,"FSK2a");
-			break;
-		case DEMOD_ASK:		
-			sprintf(retStr,"ASK");
-			break;
-		case DEMOD_NRZ:
-			sprintf(retStr,"DIRECT/NRZ");
-			break;
-		case DEMOD_PSK1:
-			sprintf(retStr,"PSK1");
-			break;
-		case DEMOD_PSK2:
-			sprintf(retStr,"PSK2");
-			break;
-		case DEMOD_PSK3:
-			sprintf(retStr,"PSK3");
-			break;
-		case DEMOD_BI:
-			sprintf(retStr,"BIPHASE");
-			break;
-		case DEMOD_BIa:
-			sprintf(retStr,"BIPHASEa");
-			break;
-		default:
-			sprintf(retStr,"(Unknown)");
-			break;
-		}
+	switch (id) {
+		case DEMOD_FSK:	snprintf(retStr,sizeof(buf),"FSK");	break;
+		case DEMOD_FSK1: snprintf(retStr,sizeof(buf),"FSK1"); break;
+		case DEMOD_FSK1a: snprintf(retStr,sizeof(buf),"FSK1a"); break;
+		case DEMOD_FSK2: snprintf(retStr,sizeof(buf),"FSK2"); break;
+		case DEMOD_FSK2a: snprintf(retStr,sizeof(buf),"FSK2a"); break;
+		case DEMOD_ASK: snprintf(retStr,sizeof(buf),"ASK"); break;
+		case DEMOD_NRZ: snprintf(retStr,sizeof(buf),"DIRECT/NRZ"); break;
+		case DEMOD_PSK1: snprintf(retStr,sizeof(buf),"PSK1"); break;
+		case DEMOD_PSK2: snprintf(retStr,sizeof(buf),"PSK2"); break;
+		case DEMOD_PSK3: snprintf(retStr,sizeof(buf),"PSK3"); break;
+		case DEMOD_BI: snprintf(retStr,sizeof(buf),"BIPHASE"); break;
+		case DEMOD_BIa: snprintf(retStr,sizeof(buf),"BIPHASEa - (CDP)"); break;
+		default: snprintf(retStr,sizeof(buf),"(Unknown)"); break;
+	}
 	return buf;
 }
 
@@ -1094,28 +1336,233 @@ uint32_t PackBits(uint8_t start, uint8_t len, uint8_t* bits){
 	return tmp;
 }
 
-static command_t CommandTable[] =
-{
-  {"help",   CmdHelp,           1, "This help"},
-  {"config", CmdT55xxSetConfig, 1, "Set/Get T55XX configuration (modulation, inverted, offset, rate)"},
-  {"detect", CmdT55xxDetect,    0, "[1] Try detecting the tag modulation from reading the configuration block."},
-  {"read",   CmdT55xxReadBlock, 0, "<block> [password] -- Read T55xx block data (page 0) [optional password]"},
-  {"write",  CmdT55xxWriteBlock,0, "<block> <data> [password] -- Write T55xx block data (page 0) [optional password]"},
-  {"trace",  CmdT55xxReadTrace, 0, "[1] Show T55xx traceability data (page 1/ blk 0-1)"},
-  {"info",   CmdT55xxInfo,      0, "[1] Show T55xx configuration data (page 0/ blk 0)"},
-  {"dump",   CmdT55xxDump,      0, "[password] Dump T55xx card block 0-7. [optional password]"},
-  {"special", special,          0, "Show block changes with 64 different offsets"},
+int CmdResetRead(const char *Cmd) {
+	UsbCommand c = {CMD_T55XX_RESET_READ, {0,0,0}};
+
+	clearCommandBuffer();
+	SendCommand(&c);
+	if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {
+		PrintAndLog("command execution time out");
+		return 0;
+	}
+
+	uint8_t got[BIGBUF_SIZE-1];
+	GetFromBigBuf(got,sizeof(got),0);
+	WaitForResponse(CMD_ACK,NULL);
+	setGraphBuf(got, sizeof(got));
+	return 1;
+}
+
+int CmdT55xxWipe(const char *Cmd) {
+	char writeData[20] = {0};
+	char *ptrData = writeData;
+
+	char cmdp = param_getchar(Cmd, 0);	
+	if ( cmdp == 'h' || cmdp == 'H') return usage_t55xx_wipe();
+
+	bool Q5 = (cmdp == 'q' || cmdp == 'Q');
+
+	// Try with the default password to reset block 0
+	// With a pwd should work even if pwd bit not set
+	PrintAndLog("\nBeginning Wipe of a T55xx tag (assuming the tag is not password protected)\n");
+
+	if ( Q5 ){
+		snprintf(ptrData,sizeof(writeData),"b 0 d 6001F004 p 0");
+	} else {
+		snprintf(ptrData,sizeof(writeData),"b 0 d 00088040 p 0");
+	}
+
+	if (!CmdT55xxWriteBlock(ptrData)) PrintAndLog("Error writing blk 0");
+
+	for (uint8_t blk = 1; blk<8; blk++) {
+		snprintf(ptrData,sizeof(writeData),"b %d d 0", blk);
+		if (!CmdT55xxWriteBlock(ptrData))
+			PrintAndLog("Error writing blk %d", blk);
+
+		memset(writeData, 0x00, sizeof(writeData));
+	}
+	return 0;
+}
+
+int CmdT55xxBruteForce(const char *Cmd) {
+
+	// load a default pwd file.
+	char buf[9];
+	char filename[FILE_PATH_SIZE]={0};
+	int keycnt = 0;
+	int ch;
+	uint8_t stKeyBlock = 20;
+	uint8_t *keyBlock = NULL, *p = NULL;
+	uint32_t start_password = 0x00000000; //start password
+	uint32_t end_password   = 0xFFFFFFFF; //end   password
+	bool found = false;
+
+	char cmdp = param_getchar(Cmd, 0);
+	if (cmdp == 'h' || cmdp == 'H') return usage_t55xx_bruteforce();
+
+	keyBlock = calloc(stKeyBlock, 6);
+	if (keyBlock == NULL) return 1;
+
+	if (cmdp == 'i' || cmdp == 'I') {
+
+		int len = strlen(Cmd+2);
+		if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
+		memcpy(filename, Cmd+2, len);
+
+		FILE * f = fopen( filename , "r");
+
+		if ( !f ) {
+			PrintAndLog("File: %s: not found or locked.", filename);
+			free(keyBlock);
+			return 1;
+		}
+
+		while( fgets(buf, sizeof(buf), f) ) {
+			if (strlen(buf) < 8 || buf[7] == '\n') continue;
+
+			while (fgetc(f) != '\n' && !feof(f)) ;  //goto next line
+
+			//The line start with # is comment, skip
+			if( buf[0]=='#' ) continue;
+
+			if (!isxdigit(buf[0])) {
+				PrintAndLog("File content error. '%s' must include 8 HEX symbols", buf);
+				continue;
+			}
+			
+			buf[8] = 0;
+
+			if ( stKeyBlock - keycnt < 2) {
+				p = realloc(keyBlock, 6*(stKeyBlock+=10));
+				if (!p) {
+					PrintAndLog("Cannot allocate memory for defaultKeys");
+					free(keyBlock);
+					fclose(f);
+					return 2;
+				}
+				keyBlock = p;
+			}
+			memset(keyBlock + 4 * keycnt, 0, 4);
+			num_to_bytes(strtoll(buf, NULL, 16), 4, keyBlock + 4*keycnt);
+			PrintAndLog("chk custom pwd[%2d] %08X", keycnt, bytes_to_num(keyBlock + 4*keycnt, 4));
+			keycnt++;
+			memset(buf, 0, sizeof(buf));
+		}
+		fclose(f);
+		
+		if (keycnt == 0) {
+			PrintAndLog("No keys found in file");
+			free(keyBlock);
+			return 1;
+		}
+		PrintAndLog("Loaded %d keys", keycnt);
+		
+		// loop
+		uint64_t testpwd = 0x00;
+		for (uint16_t c = 0; c < keycnt; ++c ) {
+
+			if (ukbhit()) {
+				ch = getchar();
+				(void)ch;
+				printf("\naborted via keyboard!\n");
+				free(keyBlock);
+				return 0;
+			}
+
+			testpwd = bytes_to_num(keyBlock + 4*c, 4);
+
+			PrintAndLog("Testing %08X", testpwd);
+
+			if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, testpwd)) {
+				PrintAndLog("Aquireing data from device failed. Quitting");
+				free(keyBlock);
+				return 0;
+			}
+
+			found = tryDetectModulation();
+
+			if ( found ) {
+				PrintAndLog("Found valid password: [%08X]", testpwd);
+				free(keyBlock);
+				return 0;
+			}
+		}
+		PrintAndLog("Password NOT found.");
+		free(keyBlock);
+		return 0;
+	}
+
+	// Try to read Block 7, first :)
+
+	// incremental pwd range search
+	start_password = param_get32ex(Cmd, 0, 0, 16);
+	end_password = param_get32ex(Cmd, 1, 0, 16);
+
+	if ( start_password >= end_password ) {
+		free(keyBlock);
+		return usage_t55xx_bruteforce();
+	}
+	PrintAndLog("Search password range [%08X -> %08X]", start_password, end_password);
+
+	uint32_t i = start_password;
+
+	while ((!found) && (i <= end_password)) {
+
+		printf(".");
+		fflush(stdout);
+		if (ukbhit()) {
+			ch = getchar();
+			(void)ch;
+			printf("\naborted via keyboard!\n");
+			free(keyBlock);
+			return 0;
+		}
+
+		if (!AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, i)) {
+			PrintAndLog("Aquireing data from device failed. Quitting");
+			free(keyBlock);
+			return 0;
+		}
+		found = tryDetectModulation();
+
+		if (found) break;
+		i++;
+	}
+
+	PrintAndLog("");
+
+	if (found)
+		PrintAndLog("Found valid password: [%08x]", i);
+	else
+		PrintAndLog("Password NOT found. Last tried: [%08x]", --i);
+
+	free(keyBlock);
+	return 0;
+}
+
+static command_t CommandTable[] = {
+  {"help",      CmdHelp,           1, "This help"},
+	{"bruteforce",CmdT55xxBruteForce,0, "<start password> <end password> [i <*.dic>] Simple bruteforce attack to find password"},
+  {"config",    CmdT55xxSetConfig, 1, "Set/Get T55XX configuration (modulation, inverted, offset, rate)"},
+  {"detect",    CmdT55xxDetect,    1, "[1] Try detecting the tag modulation from reading the configuration block."},
+  {"read",      CmdT55xxReadBlock, 0, "b <block> p [password] [o] [1] -- Read T55xx block data. Optional [p password], [override], [page1]"},
+  {"resetread", CmdResetRead,      0, "Send Reset Cmd then lf read the stream to attempt to identify the start of it (needs a demod and/or plot after)"},
+  {"write",     CmdT55xxWriteBlock,0, "b <block> d <data> p [password] [1] -- Write T55xx block data. Optional [p password], [page1]"},
+  {"trace",     CmdT55xxReadTrace, 1, "[1] Show T55x7 traceability data (page 1/ blk 0-1)"},
+  {"info",      CmdT55xxInfo,      1, "[1] Show T55x7 configuration data (page 0/ blk 0)"},
+  {"dump",      CmdT55xxDump,      0, "[password] [o] Dump T55xx card block 0-7. Optional [password], [override]"},
+  {"special",   special,           0, "Show block changes with 64 different offsets"},
+  {"wakeup",    CmdT55xxWakeUp,    0, "Send AOR wakeup command"},
+  {"wipe",      CmdT55xxWipe,      0, "[q] Wipe a T55xx tag and set defaults (will destroy any data on tag)"},
   {NULL, NULL, 0, NULL}
 };
 
-int CmdLFT55XX(const char *Cmd)
-{
+int CmdLFT55XX(const char *Cmd) {
   CmdsParse(CommandTable, Cmd);
   return 0;
 }
 
-int CmdHelp(const char *Cmd)
-{
+int CmdHelp(const char *Cmd) {
   CmdsHelp(CommandTable);
   return 0;
 }