X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/1f42ccddfb11c6a862c6cb058af765acae038e4d..0c29544f640b8e8c03005b10229526a2d57e5954:/common/usb_cdc.c?ds=inline

diff --git a/common/usb_cdc.c b/common/usb_cdc.c
index 5577e354..84aa2c06 100644
--- a/common/usb_cdc.c
+++ b/common/usb_cdc.c
@@ -36,6 +36,8 @@
 #include "at91sam7s512.h"
 #include "config_gpio.h"
 
+
+#define AT91C_EP_CONTROL     0
 #define AT91C_EP_IN_SIZE  0x40
 #define AT91C_EP_OUT         1
 #define AT91C_EP_OUT_SIZE 0x40
@@ -197,7 +199,30 @@ const char* getStringDescriptor(uint8_t idx)
 	}
 }
 
-/* USB standard request code */
+// Bitmap for all status bits in CSR which must be written as 1 to cause no effect
+#define REG_NO_EFFECT_1_ALL      AT91C_UDP_RX_DATA_BK0 | AT91C_UDP_RX_DATA_BK1 \
+                                |AT91C_UDP_STALLSENT   | AT91C_UDP_RXSETUP \
+                                |AT91C_UDP_TXCOMP
+
+// Clear flags in the UDP_CSR register
+#define UDP_CLEAR_EP_FLAGS(endpoint, flags) { \
+	volatile unsigned int reg; \
+	reg = pUdp->UDP_CSR[(endpoint)]; \
+	reg |= REG_NO_EFFECT_1_ALL; \
+	reg &= ~(flags); \
+	pUdp->UDP_CSR[(endpoint)] = reg; \
+} 
+
+// Set flags in the UDP_CSR register
+#define UDP_SET_EP_FLAGS(endpoint, flags) { \
+	volatile unsigned int reg; \
+	reg = pUdp->UDP_CSR[(endpoint)]; \
+	reg |= REG_NO_EFFECT_1_ALL; \
+	reg |= (flags); \
+	pUdp->UDP_CSR[(endpoint)] = reg; \
+}
+
+/* USB standard request codes */
 #define STD_GET_STATUS_ZERO           0x0080
 #define STD_GET_STATUS_INTERFACE      0x0081
 #define STD_GET_STATUS_ENDPOINT       0x0082
@@ -305,7 +330,7 @@ bool usb_check() {
 		// Enable the function
 		pUdp->UDP_FADDR = AT91C_UDP_FEN;
 		// Configure endpoint 0
-		pUdp->UDP_CSR[0] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL);
+		pUdp->UDP_CSR[AT91C_EP_CONTROL] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL);
 	}
 	else if (isr & AT91C_UDP_EPINT0) {
 		pUdp->UDP_ICR = AT91C_UDP_EPINT0;
@@ -354,7 +379,7 @@ uint32_t usb_read(byte_t* data, size_t len) {
 			len -= packetSize;
 			while(packetSize--)
 				data[nbBytesRcv++] = pUdp->UDP_FDR[AT91C_EP_OUT];
-			pUdp->UDP_CSR[AT91C_EP_OUT] &= ~(bank);
+			UDP_CLEAR_EP_FLAGS(AT91C_EP_OUT, bank);
 			if (bank == AT91C_UDP_RX_DATA_BK0) {
 				bank = AT91C_UDP_RX_DATA_BK1;
 			} else {
@@ -383,7 +408,7 @@ uint32_t usb_write(const byte_t* data, const size_t len) {
 	cpt = MIN(length, AT91C_EP_IN_SIZE-1);
 	length -= cpt;
 	while (cpt--) pUdp->UDP_FDR[AT91C_EP_IN] = *data++;
-	pUdp->UDP_CSR[AT91C_EP_IN] |= AT91C_UDP_TXPKTRDY;
+	UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY);
 
 	while (length) {
 		// Fill the second bank
@@ -394,9 +419,9 @@ uint32_t usb_write(const byte_t* data, const size_t len) {
 		while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) {
 			if (!usb_check()) return length;
     }
-		pUdp->UDP_CSR[AT91C_EP_IN] &= ~(AT91C_UDP_TXCOMP);
+		UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP);
 		while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP);
-		pUdp->UDP_CSR[AT91C_EP_IN] |= AT91C_UDP_TXPKTRDY;
+		UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY);
 	}
   
 	// Wait for the end of transfer
@@ -404,7 +429,7 @@ uint32_t usb_write(const byte_t* data, const size_t len) {
 		if (!usb_check()) return length;
   }
   
-	pUdp->UDP_CSR[AT91C_EP_IN] &= ~(AT91C_UDP_TXCOMP);
+	UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP);
 	while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP);
 
 	return length;
@@ -428,27 +453,27 @@ static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, uint32_t leng
 		while (cpt--)
 			pUdp->UDP_FDR[0] = *pData++;
 
-		if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) {
-			pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
-			while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP);
+		if (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) {
+			UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP);
+			while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP);
 		}
 
-		pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;
+		UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY);
 		do {
-			csr = pUdp->UDP_CSR[0];
+			csr = pUdp->UDP_CSR[AT91C_EP_CONTROL];
 
 			// Data IN stage has been stopped by a status OUT
 			if (csr & AT91C_UDP_RX_DATA_BK0) {
-				pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0);
+				UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0);
 				return;
 			}
 		} while ( !(csr & AT91C_UDP_TXCOMP) );
 
 	} while (length);
 
-	if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) {
-		pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
-		while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP);
+	if (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) {
+		UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP);
+		while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP);
 	}
 }
 
@@ -457,10 +482,10 @@ static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, uint32_t leng
 //* \brief Send zero length packet through the control endpoint
 //*----------------------------------------------------------------------------
 void AT91F_USB_SendZlp(AT91PS_UDP pUdp) {
-	pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;
-	while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) );
-	pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
-	while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP);
+	UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY);
+	while ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) );
+	UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP);
+	while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP);
 }
 
 //*----------------------------------------------------------------------------
@@ -468,10 +493,10 @@ void AT91F_USB_SendZlp(AT91PS_UDP pUdp) {
 //* \brief Stall the control endpoint
 //*----------------------------------------------------------------------------
 void AT91F_USB_SendStall(AT91PS_UDP pUdp) {
-	pUdp->UDP_CSR[0] |= AT91C_UDP_FORCESTALL;
-	while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_ISOERROR) );
-	pUdp->UDP_CSR[0] &= ~(AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR);
-	while (pUdp->UDP_CSR[0] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR));
+	UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL);
+	while ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_ISOERROR) );
+	UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR);
+	while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR));
 }
 
 //*----------------------------------------------------------------------------
@@ -482,7 +507,7 @@ void AT91F_CDC_Enumerate() {
 	byte_t bmRequestType, bRequest;
 	uint16_t wValue, wIndex, wLength, wStatus;
 
-	if ( !(pUdp->UDP_CSR[0] & AT91C_UDP_RXSETUP) )
+	if ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP) )
 		return;
 
 	bmRequestType = pUdp->UDP_FDR[0];
@@ -495,11 +520,11 @@ void AT91F_CDC_Enumerate() {
 	wLength      |= (pUdp->UDP_FDR[0] << 8);
 
 	if (bmRequestType & 0x80) {
-		pUdp->UDP_CSR[0] |= AT91C_UDP_DIR;
-		while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_DIR) );
+		UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_DIR);
+		while ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_DIR) );
 	}
-	pUdp->UDP_CSR[0] &= ~AT91C_UDP_RXSETUP;
-	while ( (pUdp->UDP_CSR[0]  & AT91C_UDP_RXSETUP)  );
+	UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RXSETUP);
+	while ( (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP)  );
 
 	// Handle supported standard device request Cf Table 9-3 in USB specification Rev 1.1
 	switch ((bRequest << 8) | bmRequestType) {
@@ -595,8 +620,8 @@ void AT91F_CDC_Enumerate() {
 
 	// handle CDC class requests
 	case SET_LINE_CODING:
-		while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_RX_DATA_BK0) );
-		pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0);
+		while ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RX_DATA_BK0) );
+		UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0);
 		AT91F_USB_SendZlp(pUdp);
 		break;
 	case GET_LINE_CODING: