X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/1f6417a9b25f05a29e8de171fb26022c996453b3..896473399bbe08d9a2d0a65763d49fd95613d8a6:/client/polarssl_config.h diff --git a/client/polarssl_config.h b/client/polarssl_config.h new file mode 100644 index 00000000..5bd88fc0 --- /dev/null +++ b/client/polarssl_config.h @@ -0,0 +1,2179 @@ +/** + * \file config.h + * + * \brief Configuration options (set of defines) + * + * Copyright (C) 2006-2014, Brainspark B.V. + * + * This file is part of PolarSSL (http://www.polarssl.org) + * Lead Maintainer: Paul Bakker + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * This set of compile-time options may be used to enable + * or disable features selectively, and reduce the global + * memory footprint. + */ +#ifndef POLARSSL_CONFIG_H +#define POLARSSL_CONFIG_H + +#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) +#define _CRT_SECURE_NO_DEPRECATE 1 +#endif + +/** + * \name SECTION: System support + * + * This section sets system specific settings. + * \{ + */ + +/** + * \def POLARSSL_HAVE_INT8 + * + * The system uses 8-bit wide native integers. + * + * Uncomment if native integers are 8-bit wide. + */ +//#define POLARSSL_HAVE_INT8 + +/** + * \def POLARSSL_HAVE_INT16 + * + * The system uses 16-bit wide native integers. + * + * Uncomment if native integers are 16-bit wide. + */ +//#define POLARSSL_HAVE_INT16 + +/** + * \def POLARSSL_HAVE_LONGLONG + * + * The compiler supports the 'long long' type. + * (Only used on 32-bit platforms) + */ +#define POLARSSL_HAVE_LONGLONG + +/** + * \def POLARSSL_HAVE_ASM + * + * The compiler has support for asm(). + * + * Requires support for asm() in compiler. + * + * Used in: + * library/timing.c + * library/padlock.c + * include/polarssl/bn_mul.h + * + * Comment to disable the use of assembly code. + */ +#define POLARSSL_HAVE_ASM + +/** + * \def POLARSSL_HAVE_SSE2 + * + * CPU supports SSE2 instruction set. + * + * Uncomment if the CPU supports SSE2 (IA-32 specific). + */ +//#define POLARSSL_HAVE_SSE2 + +/** + * \def POLARSSL_HAVE_TIME + * + * System has time.h and time() / localtime() / gettimeofday(). + * + * Comment if your system does not support time functions + */ +#define POLARSSL_HAVE_TIME + +/** + * \def POLARSSL_HAVE_IPV6 + * + * System supports the basic socket interface for IPv6 (RFC 3493), + * specifically getaddrinfo(), freeaddrinfo() and struct sockaddr_storage. + * + * Note: on Windows/MingW, XP or higher is required. + * + * Comment if your system does not support the IPv6 socket interface + */ +#define POLARSSL_HAVE_IPV6 + +/** + * \def POLARSSL_PLATFORM_MEMORY + * + * Enable the memory allocation layer. + * + * By default PolarSSL uses the system-provided malloc() and free(). + * This allows different allocators (self-implemented or provided) to be + * provided to the platform abstraction layer. + * + * Enabling POLARSSL_PLATFORM_MEMORY will provide "platform_set_malloc_free()" + * to allow you to set an alternative malloc() and free() function pointer. + * + * Requires: POLARSSL_PLATFORM_C + * + * Enable this layer to allow use of alternative memory allocators. + */ +//#define POLARSSL_PLATFORM_MEMORY + +/** + * \def POLARSSL_PLATFORM_NO_STD_FUNCTIONS + * + * Do not assign standard functions in the platform layer (e.g. malloc() to + * POLARSSL_PLATFORM_STD_MALLOC and printf() to POLARSSL_PLATFORM_STD_PRINTF) + * + * This makes sure there are no linking errors on platforms that do not support + * these functions. You will HAVE to provide alternatives, either at runtime + * via the platform_set_xxx() functions or at compile time by setting + * the POLARSSL_PLATFORM_STD_XXX defines. + * + * Requires: POLARSSL_PLATFORM_C + * + * Uncomment to prevent default assignment of standard functions in the + * platform layer. + */ +//#define POLARSSL_PLATFORM_NO_STD_FUNCTIONS + +/** + * \def POLARSSL_PLATFORM_XXX_ALT + * + * Uncomment a macro to let PolarSSL support the function in the platform + * abstraction layer. + * + * Example: In case you uncomment POLARSSL_PLATFORM_PRINTF_ALT, PolarSSL will + * provide a function "platform_set_printf()" that allows you to set an + * alternative printf function pointer. + * + * All these define require POLARSSL_PLATFORM_C to be defined! + * + * Uncomment a macro to enable alternate implementation of specific base + * platform function + */ +//#define POLARSSL_PLATFORM_PRINTF_ALT +//#define POLARSSL_PLATFORM_FPRINTF_ALT +/* \} name SECTION: System support */ + +/** + * \name SECTION: PolarSSL feature support + * + * This section sets support for features that are or are not needed + * within the modules that are enabled. + * \{ + */ + +/** + * \def POLARSSL_TIMING_ALT + * + * Uncomment to provide your own alternate implementation for hardclock(), + * get_timer(), set_alarm() and m_sleep(). + * + * Only works if you have POLARSSL_TIMING_C enabled. + * + * You will need to provide a header "timing_alt.h" and an implementation at + * compile time. + */ +//#define POLARSSL_TIMING_ALT + +/** + * \def POLARSSL_XXX_ALT + * + * Uncomment a macro to let PolarSSL use your alternate core implementation of + * a symmetric or hash algorithm (e.g. platform specific assembly optimized + * implementations). Keep in mind that the function prototypes should remain + * the same. + * + * Example: In case you uncomment POLARSSL_AES_ALT, PolarSSL will no longer + * provide the "struct aes_context" definition and omit the base function + * declarations and implementations. "aes_alt.h" will be included from + * "aes.h" to include the new function definitions. + * + * Uncomment a macro to enable alternate implementation for core algorithm + * functions + */ +//#define POLARSSL_AES_ALT +//#define POLARSSL_ARC4_ALT +//#define POLARSSL_BLOWFISH_ALT +//#define POLARSSL_CAMELLIA_ALT +//#define POLARSSL_DES_ALT +//#define POLARSSL_XTEA_ALT +//#define POLARSSL_MD2_ALT +//#define POLARSSL_MD4_ALT +//#define POLARSSL_MD5_ALT +//#define POLARSSL_RIPEMD160_ALT +//#define POLARSSL_SHA1_ALT +//#define POLARSSL_SHA256_ALT +//#define POLARSSL_SHA512_ALT + +/** + * \def POLARSSL_AES_ROM_TABLES + * + * Store the AES tables in ROM. + * + * Uncomment this macro to store the AES tables in ROM. + * + */ +//#define POLARSSL_AES_ROM_TABLES + +/** + * \def POLARSSL_CIPHER_MODE_CBC + * + * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers. + */ +#define POLARSSL_CIPHER_MODE_CBC + +/** + * \def POLARSSL_CIPHER_MODE_CFB + * + * Enable Cipher Feedback mode (CFB) for symmetric ciphers. + */ +#define POLARSSL_CIPHER_MODE_CFB + +/** + * \def POLARSSL_CIPHER_MODE_CTR + * + * Enable Counter Block Cipher mode (CTR) for symmetric ciphers. + */ +#define POLARSSL_CIPHER_MODE_CTR + +/** + * \def POLARSSL_CIPHER_NULL_CIPHER + * + * Enable NULL cipher. + * Warning: Only do so when you know what you are doing. This allows for + * encryption or channels without any security! + * + * Requires POLARSSL_ENABLE_WEAK_CIPHERSUITES as well to enable + * the following ciphersuites: + * TLS_ECDH_ECDSA_WITH_NULL_SHA + * TLS_ECDH_RSA_WITH_NULL_SHA + * TLS_ECDHE_ECDSA_WITH_NULL_SHA + * TLS_ECDHE_RSA_WITH_NULL_SHA + * TLS_ECDHE_PSK_WITH_NULL_SHA384 + * TLS_ECDHE_PSK_WITH_NULL_SHA256 + * TLS_ECDHE_PSK_WITH_NULL_SHA + * TLS_DHE_PSK_WITH_NULL_SHA384 + * TLS_DHE_PSK_WITH_NULL_SHA256 + * TLS_DHE_PSK_WITH_NULL_SHA + * TLS_RSA_WITH_NULL_SHA256 + * TLS_RSA_WITH_NULL_SHA + * TLS_RSA_WITH_NULL_MD5 + * TLS_RSA_PSK_WITH_NULL_SHA384 + * TLS_RSA_PSK_WITH_NULL_SHA256 + * TLS_RSA_PSK_WITH_NULL_SHA + * TLS_PSK_WITH_NULL_SHA384 + * TLS_PSK_WITH_NULL_SHA256 + * TLS_PSK_WITH_NULL_SHA + * + * Uncomment this macro to enable the NULL cipher and ciphersuites + */ +//#define POLARSSL_CIPHER_NULL_CIPHER + +/** + * \def POLARSSL_CIPHER_PADDING_XXX + * + * Uncomment or comment macros to add support for specific padding modes + * in the cipher layer with cipher modes that support padding (e.g. CBC) + * + * If you disable all padding modes, only full blocks can be used with CBC. + * + * Enable padding modes in the cipher layer. + */ +#define POLARSSL_CIPHER_PADDING_PKCS7 +#define POLARSSL_CIPHER_PADDING_ONE_AND_ZEROS +#define POLARSSL_CIPHER_PADDING_ZEROS_AND_LEN +#define POLARSSL_CIPHER_PADDING_ZEROS + +/** + * \def POLARSSL_ENABLE_WEAK_CIPHERSUITES + * + * Enable weak ciphersuites in SSL / TLS. + * Warning: Only do so when you know what you are doing. This allows for + * channels with virtually no security at all! + * + * This enables the following ciphersuites: + * TLS_RSA_WITH_DES_CBC_SHA + * TLS_DHE_RSA_WITH_DES_CBC_SHA + * + * Uncomment this macro to enable weak ciphersuites + */ +//#define POLARSSL_ENABLE_WEAK_CIPHERSUITES + +/** + * \def POLARSSL_REMOVE_ARC4_CIPHERSUITES + * + * Remove RC4 ciphersuites by default in SSL / TLS. + * This flag removes the ciphersuites based on RC4 from the default list as + * returned by ssl_list_ciphersuites(). However, it is still possible to + * enable (some of) them with ssl_set_ciphersuites() by including them + * explicitly. + * + * Uncomment this macro to remove RC4 ciphersuites by default. + */ +//#define POLARSSL_REMOVE_ARC4_CIPHERSUITES + +/** + * \def POLARSSL_ECP_XXXX_ENABLED + * + * Enables specific curves within the Elliptic Curve module. + * By default all supported curves are enabled. + * + * Comment macros to disable the curve and functions for it + */ +#define POLARSSL_ECP_DP_SECP192R1_ENABLED +#define POLARSSL_ECP_DP_SECP224R1_ENABLED +#define POLARSSL_ECP_DP_SECP256R1_ENABLED +#define POLARSSL_ECP_DP_SECP384R1_ENABLED +#define POLARSSL_ECP_DP_SECP521R1_ENABLED +#define POLARSSL_ECP_DP_SECP192K1_ENABLED +#define POLARSSL_ECP_DP_SECP224K1_ENABLED +#define POLARSSL_ECP_DP_SECP256K1_ENABLED +#define POLARSSL_ECP_DP_BP256R1_ENABLED +#define POLARSSL_ECP_DP_BP384R1_ENABLED +#define POLARSSL_ECP_DP_BP512R1_ENABLED +//#define POLARSSL_ECP_DP_M221_ENABLED // Not implemented yet! +#define POLARSSL_ECP_DP_M255_ENABLED +//#define POLARSSL_ECP_DP_M383_ENABLED // Not implemented yet! +//#define POLARSSL_ECP_DP_M511_ENABLED // Not implemented yet! + +/** + * \def POLARSSL_ECP_NIST_OPTIM + * + * Enable specific 'modulo p' routines for each NIST prime. + * Depending on the prime and architecture, makes operations 4 to 8 times + * faster on the corresponding curve. + * + * Comment this macro to disable NIST curves optimisation. + */ +#define POLARSSL_ECP_NIST_OPTIM + +/** + * \def POLARSSL_ECDSA_DETERMINISTIC + * + * Enable deterministic ECDSA (RFC 6979). + * Standard ECDSA is "fragile" in the sense that lack of entropy when signing + * may result in a compromise of the long-term signing key. This is avoided by + * the deterministic variant. + * + * Requires: POLARSSL_HMAC_DRBG_C + * + * Comment this macro to disable deterministic ECDSA. + */ +#define POLARSSL_ECDSA_DETERMINISTIC + +/** + * \def POLARSSL_KEY_EXCHANGE_PSK_ENABLED + * + * Enable the PSK based ciphersuite modes in SSL / TLS. + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_PSK_WITH_AES_256_GCM_SHA384 + * TLS_PSK_WITH_AES_256_CBC_SHA384 + * TLS_PSK_WITH_AES_256_CBC_SHA + * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_PSK_WITH_AES_128_GCM_SHA256 + * TLS_PSK_WITH_AES_128_CBC_SHA256 + * TLS_PSK_WITH_AES_128_CBC_SHA + * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_PSK_WITH_3DES_EDE_CBC_SHA + * TLS_PSK_WITH_RC4_128_SHA + */ +#define POLARSSL_KEY_EXCHANGE_PSK_ENABLED + +/** + * \def POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED + * + * Enable the DHE-PSK based ciphersuite modes in SSL / TLS. + * + * Requires: POLARSSL_DHM_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 + * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 + * TLS_DHE_PSK_WITH_AES_256_CBC_SHA + * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 + * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 + * TLS_DHE_PSK_WITH_AES_128_CBC_SHA + * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA + * TLS_DHE_PSK_WITH_RC4_128_SHA + */ +#define POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED + +/** + * \def POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED + * + * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS. + * + * Requires: POLARSSL_ECDH_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 + * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA + * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 + * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA + * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA + * TLS_ECDHE_PSK_WITH_RC4_128_SHA + */ +#define POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED + +/** + * \def POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED + * + * Enable the RSA-PSK based ciphersuite modes in SSL / TLS. + * + * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15, + * POLARSSL_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 + * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 + * TLS_RSA_PSK_WITH_AES_256_CBC_SHA + * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 + * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 + * TLS_RSA_PSK_WITH_AES_128_CBC_SHA + * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA + * TLS_RSA_PSK_WITH_RC4_128_SHA + */ +#define POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED + +/** + * \def POLARSSL_KEY_EXCHANGE_RSA_ENABLED + * + * Enable the RSA-only based ciphersuite modes in SSL / TLS. + * + * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15, + * POLARSSL_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_RSA_WITH_AES_256_GCM_SHA384 + * TLS_RSA_WITH_AES_256_CBC_SHA256 + * TLS_RSA_WITH_AES_256_CBC_SHA + * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 + * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA + * TLS_RSA_WITH_AES_128_GCM_SHA256 + * TLS_RSA_WITH_AES_128_CBC_SHA256 + * TLS_RSA_WITH_AES_128_CBC_SHA + * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA + * TLS_RSA_WITH_3DES_EDE_CBC_SHA + * TLS_RSA_WITH_RC4_128_SHA + * TLS_RSA_WITH_RC4_128_MD5 + */ +#define POLARSSL_KEY_EXCHANGE_RSA_ENABLED + +/** + * \def POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED + * + * Enable the DHE-RSA based ciphersuite modes in SSL / TLS. + * + * Requires: POLARSSL_DHM_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15, + * POLARSSL_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 + * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 + * TLS_DHE_RSA_WITH_AES_256_CBC_SHA + * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 + * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA + * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 + * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 + * TLS_DHE_RSA_WITH_AES_128_CBC_SHA + * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA + * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA + */ +#define POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED + +/** + * \def POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED + * + * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS. + * + * Requires: POLARSSL_ECDH_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15, + * POLARSSL_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 + * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 + * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA + * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 + * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 + * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA + * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA + * TLS_ECDHE_RSA_WITH_RC4_128_SHA + */ +#define POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED + +/** + * \def POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED + * + * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS. + * + * Requires: POLARSSL_ECDH_C, POLARSSL_ECDSA_C, POLARSSL_X509_CRT_PARSE_C, + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 + * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 + * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA + * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 + * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 + * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA + * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA + * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA + */ +#define POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED + +/** + * \def POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED + * + * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS. + * + * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_ECDH_ECDSA_WITH_RC4_128_SHA + * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA + * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA + * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA + * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 + * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 + * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 + * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 + * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 + */ +#define POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED + +/** + * \def POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED + * + * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS. + * + * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_ECDH_RSA_WITH_RC4_128_SHA + * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA + * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA + * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA + * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 + * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 + * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 + * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 + * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 + */ +#define POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED + +/** + * \def POLARSSL_PK_PARSE_EC_EXTENDED + * + * Enhance support for reading EC keys using variants of SEC1 not allowed by + * RFC 5915 and RFC 5480. + * + * Currently this means parsing the SpecifiedECDomain choice of EC + * parameters (only known groups are supported, not arbitrary domains, to + * avoid validation issues). + * + * Disable if you only need to support RFC 5915 + 5480 key formats. + */ +#define POLARSSL_PK_PARSE_EC_EXTENDED + +/** + * \def POLARSSL_ERROR_STRERROR_BC + * + * Make available the backward compatible error_strerror() next to the + * current polarssl_strerror(). + * + * For new code, it is recommended to use polarssl_strerror() instead and + * disable this. + * + * Disable if you run into name conflicts and want to really remove the + * error_strerror() + */ +#define POLARSSL_ERROR_STRERROR_BC + +/** + * \def POLARSSL_ERROR_STRERROR_DUMMY + * + * Enable a dummy error function to make use of polarssl_strerror() in + * third party libraries easier when POLARSSL_ERROR_C is disabled + * (no effect when POLARSSL_ERROR_C is enabled). + * + * You can safely disable this if POLARSSL_ERROR_C is enabled, or if you're + * not using polarssl_strerror() or error_strerror() in your application. + * + * Disable if you run into name conflicts and want to really remove the + * polarssl_strerror() + */ +#define POLARSSL_ERROR_STRERROR_DUMMY + +/** + * \def POLARSSL_GENPRIME + * + * Enable the prime-number generation code. + * + * Requires: POLARSSL_BIGNUM_C + */ +#define POLARSSL_GENPRIME + +/** + * \def POLARSSL_FS_IO + * + * Enable functions that use the filesystem. + */ +#define POLARSSL_FS_IO + +/** + * \def POLARSSL_NO_DEFAULT_ENTROPY_SOURCES + * + * Do not add default entropy sources. These are the platform specific, + * hardclock and HAVEGE based poll functions. + * + * This is useful to have more control over the added entropy sources in an + * application. + * + * Uncomment this macro to prevent loading of default entropy functions. + */ +//#define POLARSSL_NO_DEFAULT_ENTROPY_SOURCES + +/** + * \def POLARSSL_NO_PLATFORM_ENTROPY + * + * Do not use built-in platform entropy functions. + * This is useful if your platform does not support + * standards like the /dev/urandom or Windows CryptoAPI. + * + * Uncomment this macro to disable the built-in platform entropy functions. + */ +//#define POLARSSL_NO_PLATFORM_ENTROPY + +/** + * \def POLARSSL_ENTROPY_FORCE_SHA256 + * + * Force the entropy accumulator to use a SHA-256 accumulator instead of the + * default SHA-512 based one (if both are available). + * + * Requires: POLARSSL_SHA256_C + * + * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option + * if you have performance concerns. + * + * This option is only useful if both POLARSSL_SHA256_C and + * POLARSSL_SHA512_C are defined. Otherwise the available hash module is used. + */ +//#define POLARSSL_ENTROPY_FORCE_SHA256 + +/** + * \def POLARSSL_MEMORY_DEBUG + * + * Enable debugging of buffer allocator memory issues. Automatically prints + * (to stderr) all (fatal) messages on memory allocation issues. Enables + * function for 'debug output' of allocated memory. + * + * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C + * + * Uncomment this macro to let the buffer allocator print out error messages. + */ +//#define POLARSSL_MEMORY_DEBUG + +/** + * \def POLARSSL_MEMORY_BACKTRACE + * + * Include backtrace information with each allocated block. + * + * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C + * GLIBC-compatible backtrace() an backtrace_symbols() support + * + * Uncomment this macro to include backtrace information + */ +//#define POLARSSL_MEMORY_BACKTRACE + +/** + * \def POLARSSL_PKCS1_V15 + * + * Enable support for PKCS#1 v1.5 encoding. + * + * Requires: POLARSSL_RSA_C + * + * This enables support for PKCS#1 v1.5 operations. + */ +#define POLARSSL_PKCS1_V15 + +/** + * \def POLARSSL_PKCS1_V21 + * + * Enable support for PKCS#1 v2.1 encoding. + * + * Requires: POLARSSL_MD_C, POLARSSL_RSA_C + * + * This enables support for RSAES-OAEP and RSASSA-PSS operations. + */ +#define POLARSSL_PKCS1_V21 + +/** + * \def POLARSSL_RSA_NO_CRT + * + * Do not use the Chinese Remainder Theorem for the RSA private operation. + * + * Uncomment this macro to disable the use of CRT in RSA. + * + */ +//#define POLARSSL_RSA_NO_CRT + +/** + * \def POLARSSL_SELF_TEST + * + * Enable the checkup functions (*_self_test). + */ +#define POLARSSL_SELF_TEST + +/** + * \def POLARSSL_SSL_ALL_ALERT_MESSAGES + * + * Enable sending of alert messages in case of encountered errors as per RFC. + * If you choose not to send the alert messages, PolarSSL can still communicate + * with other servers, only debugging of failures is harder. + * + * The advantage of not sending alert messages, is that no information is given + * about reasons for failures thus preventing adversaries of gaining intel. + * + * Enable sending of all alert messages + */ +#define POLARSSL_SSL_ALERT_MESSAGES + +/** + * \def POLARSSL_SSL_DEBUG_ALL + * + * Enable the debug messages in SSL module for all issues. + * Debug messages have been disabled in some places to prevent timing + * attacks due to (unbalanced) debugging function calls. + * + * If you need all error reporting you should enable this during debugging, + * but remove this for production servers that should log as well. + * + * Uncomment this macro to report all debug messages on errors introducing + * a timing side-channel. + * + */ +//#define POLARSSL_SSL_DEBUG_ALL + +/** + * \def POLARSSL_SSL_HW_RECORD_ACCEL + * + * Enable hooking functions in SSL module for hardware acceleration of + * individual records. + * + * Uncomment this macro to enable hooking functions. + */ +//#define POLARSSL_SSL_HW_RECORD_ACCEL + +/** + * \def POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO + * + * Enable support for receiving and parsing SSLv2 Client Hello messages for the + * SSL Server module (POLARSSL_SSL_SRV_C). + * + * Comment this macro to disable support for SSLv2 Client Hello messages. + */ +#define POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO + +/** + * \def POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE + * + * Pick the ciphersuite according to the client's preferences rather than ours + * in the SSL Server module (POLARSSL_SSL_SRV_C). + * + * Uncomment this macro to respect client's ciphersuite order + */ +//#define POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE + +/** + * \def POLARSSL_SSL_MAX_FRAGMENT_LENGTH + * + * Enable support for RFC 6066 max_fragment_length extension in SSL. + * + * Comment this macro to disable support for the max_fragment_length extension + */ +#define POLARSSL_SSL_MAX_FRAGMENT_LENGTH + +/** + * \def POLARSSL_SSL_PROTO_SSL3 + * + * Enable support for SSL 3.0. + * + * Requires: POLARSSL_MD5_C + * POLARSSL_SHA1_C + * + * Comment this macro to disable support for SSL 3.0 + */ +#define POLARSSL_SSL_PROTO_SSL3 + +/** + * \def POLARSSL_SSL_PROTO_TLS1 + * + * Enable support for TLS 1.0. + * + * Requires: POLARSSL_MD5_C + * POLARSSL_SHA1_C + * + * Comment this macro to disable support for TLS 1.0 + */ +#define POLARSSL_SSL_PROTO_TLS1 + +/** + * \def POLARSSL_SSL_PROTO_TLS1_1 + * + * Enable support for TLS 1.1. + * + * Requires: POLARSSL_MD5_C + * POLARSSL_SHA1_C + * + * Comment this macro to disable support for TLS 1.1 + */ +#define POLARSSL_SSL_PROTO_TLS1_1 + +/** + * \def POLARSSL_SSL_PROTO_TLS1_2 + * + * Enable support for TLS 1.2. + * + * Requires: POLARSSL_SHA1_C or POLARSSL_SHA256_C or POLARSSL_SHA512_C + * (Depends on ciphersuites) + * + * Comment this macro to disable support for TLS 1.2 + */ +#define POLARSSL_SSL_PROTO_TLS1_2 + +/** + * \def POLARSSL_SSL_ALPN + * + * Enable support for Application Layer Protocol Negotiation. + * draft-ietf-tls-applayerprotoneg-05 + * + * Comment this macro to disable support for ALPN. + */ +#define POLARSSL_SSL_ALPN + +/** + * \def POLARSSL_SSL_SESSION_TICKETS + * + * Enable support for RFC 5077 session tickets in SSL. + * + * Requires: POLARSSL_AES_C + * POLARSSL_SHA256_C + * POLARSSL_CIPHER_MODE_CBC + * + * Comment this macro to disable support for SSL session tickets + */ +#define POLARSSL_SSL_SESSION_TICKETS + +/** + * \def POLARSSL_SSL_SERVER_NAME_INDICATION + * + * Enable support for RFC 6066 server name indication (SNI) in SSL. + * + * Comment this macro to disable support for server name indication in SSL + */ +#define POLARSSL_SSL_SERVER_NAME_INDICATION + +/** + * \def POLARSSL_SSL_TRUNCATED_HMAC + * + * Enable support for RFC 6066 truncated HMAC in SSL. + * + * Comment this macro to disable support for truncated HMAC in SSL + */ +#define POLARSSL_SSL_TRUNCATED_HMAC + +/** + * \def POLARSSL_SSL_SET_CURVES + * + * Enable ssl_set_curves(). + * + * This is disabled by default since it breaks binary compatibility with the + * 1.3.x line. If you choose to enable it, you will need to rebuild your + * application against the new header files, relinking will not be enough. + * It will be enabled by default, or no longer an option, in the 1.4 branch. + * + * Uncomment to make ssl_set_curves() available. + */ +//#define POLARSSL_SSL_SET_CURVES + +/** + * \def POLARSSL_THREADING_ALT + * + * Provide your own alternate threading implementation. + * + * Requires: POLARSSL_THREADING_C + * + * Uncomment this to allow your own alternate threading implementation. + */ +//#define POLARSSL_THREADING_ALT + +/** + * \def POLARSSL_THREADING_PTHREAD + * + * Enable the pthread wrapper layer for the threading layer. + * + * Requires: POLARSSL_THREADING_C + * + * Uncomment this to enable pthread mutexes. + */ +//#define POLARSSL_THREADING_PTHREAD + +/** + * \def POLARSSL_VERSION_FEATURES + * + * Allow run-time checking of compile-time enabled features. Thus allowing users + * to check at run-time if the library is for instance compiled with threading + * support via version_check_feature(). + * + * Requires: POLARSSL_VERSION_C + * + * Comment this to disable run-time checking and save ROM space + */ +#define POLARSSL_VERSION_FEATURES + +/** + * \def POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3 + * + * If set, the X509 parser will not break-off when parsing an X509 certificate + * and encountering an extension in a v1 or v2 certificate. + * + * Uncomment to prevent an error. + */ +//#define POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3 + +/** + * \def POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION + * + * If set, the X509 parser will not break-off when parsing an X509 certificate + * and encountering an unknown critical extension. + * + * Uncomment to prevent an error. + */ +//#define POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION + +/** + * \def POLARSSL_X509_CHECK_KEY_USAGE + * + * Enable verification of the keyUsage extension (CA and leaf certificates). + * + * Disabling this avoids problems with mis-issued and/or misused + * (intermediate) CA and leaf certificates. + * + * \warning Depending on your PKI use, disabling this can be a security risk! + * + * Comment to skip keyUsage checking for both CA and leaf certificates. + */ +#define POLARSSL_X509_CHECK_KEY_USAGE + +/** + * \def POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE + * + * Enable verification of the extendedKeyUsage extension (leaf certificates). + * + * Disabling this avoids problems with mis-issued and/or misused certificates. + * + * \warning Depending on your PKI use, disabling this can be a security risk! + * + * Comment to skip extendedKeyUsage checking for certificates. + */ +#define POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE + +/** + * \def POLARSSL_X509_RSASSA_PSS_SUPPORT + * + * Enable parsing and verification of X.509 certificates, CRLs and CSRS + * signed with RSASSA-PSS (aka PKCS#1 v2.1). + * + * Comment this macro to disallow using RSASSA-PSS in certificates. + */ +#define POLARSSL_X509_RSASSA_PSS_SUPPORT + +/** + * \def POLARSSL_ZLIB_SUPPORT + * + * If set, the SSL/TLS module uses ZLIB to support compression and + * decompression of packet data. + * + * \warning TLS-level compression MAY REDUCE SECURITY! See for example the + * CRIME attack. Before enabling this option, you should examine with care if + * CRIME or similar exploits may be a applicable to your use case. + * + * Used in: library/ssl_tls.c + * library/ssl_cli.c + * library/ssl_srv.c + * + * This feature requires zlib library and headers to be present. + * + * Uncomment to enable use of ZLIB + */ +//#define POLARSSL_ZLIB_SUPPORT +/* \} name SECTION: PolarSSL feature support */ + +/** + * \name SECTION: PolarSSL modules + * + * This section enables or disables entire modules in PolarSSL + * \{ + */ + +/** + * \def POLARSSL_AESNI_C + * + * Enable AES-NI support on x86-64. + * + * Module: library/aesni.c + * Caller: library/aes.c + * + * Requires: POLARSSL_HAVE_ASM + * + * This modules adds support for the AES-NI instructions on x86-64 + */ +//#define POLARSSL_AESNI_C + +/** + * \def POLARSSL_AES_C + * + * Enable the AES block cipher. + * + * Module: library/aes.c + * Caller: library/ssl_tls.c + * library/pem.c + * library/ctr_drbg.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA + * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA + * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA + * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA + * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 + * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 + * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 + * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 + * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 + * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 + * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 + * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 + * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 + * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 + * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 + * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 + * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 + * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 + * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA + * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA + * TLS_DHE_RSA_WITH_AES_256_CBC_SHA + * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 + * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 + * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 + * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 + * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 + * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 + * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA + * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA + * TLS_DHE_RSA_WITH_AES_128_CBC_SHA + * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 + * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 + * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 + * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA + * TLS_DHE_PSK_WITH_AES_256_CBC_SHA + * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 + * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 + * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 + * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA + * TLS_DHE_PSK_WITH_AES_128_CBC_SHA + * TLS_RSA_WITH_AES_256_GCM_SHA384 + * TLS_RSA_WITH_AES_256_CBC_SHA256 + * TLS_RSA_WITH_AES_256_CBC_SHA + * TLS_RSA_WITH_AES_128_GCM_SHA256 + * TLS_RSA_WITH_AES_128_CBC_SHA256 + * TLS_RSA_WITH_AES_128_CBC_SHA + * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 + * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 + * TLS_RSA_PSK_WITH_AES_256_CBC_SHA + * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 + * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 + * TLS_RSA_PSK_WITH_AES_128_CBC_SHA + * TLS_PSK_WITH_AES_256_GCM_SHA384 + * TLS_PSK_WITH_AES_256_CBC_SHA384 + * TLS_PSK_WITH_AES_256_CBC_SHA + * TLS_PSK_WITH_AES_128_GCM_SHA256 + * TLS_PSK_WITH_AES_128_CBC_SHA256 + * TLS_PSK_WITH_AES_128_CBC_SHA + * + * PEM_PARSE uses AES for decrypting encrypted keys. + */ +#define POLARSSL_AES_C + +/** + * \def POLARSSL_ARC4_C + * + * Enable the ARCFOUR stream cipher. + * + * Module: library/arc4.c + * Caller: library/ssl_tls.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_ECDH_ECDSA_WITH_RC4_128_SHA + * TLS_ECDH_RSA_WITH_RC4_128_SHA + * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA + * TLS_ECDHE_RSA_WITH_RC4_128_SHA + * TLS_ECDHE_PSK_WITH_RC4_128_SHA + * TLS_DHE_PSK_WITH_RC4_128_SHA + * TLS_RSA_WITH_RC4_128_SHA + * TLS_RSA_WITH_RC4_128_MD5 + * TLS_RSA_PSK_WITH_RC4_128_SHA + * TLS_PSK_WITH_RC4_128_SHA + */ +#define POLARSSL_ARC4_C + +/** + * \def POLARSSL_ASN1_PARSE_C + * + * Enable the generic ASN1 parser. + * + * Module: library/asn1.c + * Caller: library/x509.c + * library/dhm.c + * library/pkcs12.c + * library/pkcs5.c + * library/pkparse.c + */ +#define POLARSSL_ASN1_PARSE_C + +/** + * \def POLARSSL_ASN1_WRITE_C + * + * Enable the generic ASN1 writer. + * + * Module: library/asn1write.c + * Caller: library/ecdsa.c + * library/pkwrite.c + * library/x509_create.c + * library/x509write_crt.c + * library/x509write_csr.c + */ +#define POLARSSL_ASN1_WRITE_C + +/** + * \def POLARSSL_BASE64_C + * + * Enable the Base64 module. + * + * Module: library/base64.c + * Caller: library/pem.c + * + * This module is required for PEM support (required by X.509). + */ +#define POLARSSL_BASE64_C + +/** + * \def POLARSSL_BIGNUM_C + * + * Enable the multi-precision integer library. + * + * Module: library/bignum.c + * Caller: library/dhm.c + * library/ecp.c + * library/ecdsa.c + * library/rsa.c + * library/ssl_tls.c + * + * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support. + */ +#define POLARSSL_BIGNUM_C + +/** + * \def POLARSSL_BLOWFISH_C + * + * Enable the Blowfish block cipher. + * + * Module: library/blowfish.c + */ +#define POLARSSL_BLOWFISH_C + +/** + * \def POLARSSL_CAMELLIA_C + * + * Enable the Camellia block cipher. + * + * Module: library/camellia.c + * Caller: library/ssl_tls.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 + * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA + * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA + * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 + * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA + * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA + * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 + */ +#define POLARSSL_CAMELLIA_C + +/** + * \def POLARSSL_CCM_C + * + * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher. + * + * Module: library/ccm.c + * + * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C + * + * This module enables the AES-CCM ciphersuites, if other requisites are + * enabled as well. + */ +#define POLARSSL_CCM_C + +/** + * \def POLARSSL_CERTS_C + * + * Enable the test certificates. + * + * Module: library/certs.c + * Caller: + * + * Requires: POLARSSL_PEM_PARSE_C + * + * This module is used for testing (ssl_client/server). + */ +#define POLARSSL_CERTS_C + +/** + * \def POLARSSL_CIPHER_C + * + * Enable the generic cipher layer. + * + * Module: library/cipher.c + * Caller: library/ssl_tls.c + * + * Uncomment to enable generic cipher wrappers. + */ +#define POLARSSL_CIPHER_C + +/** + * \def POLARSSL_CTR_DRBG_C + * + * Enable the CTR_DRBG AES-256-based random generator. + * + * Module: library/ctr_drbg.c + * Caller: + * + * Requires: POLARSSL_AES_C + * + * This module provides the CTR_DRBG AES-256 random number generator. + */ +#define POLARSSL_CTR_DRBG_C + +/** + * \def POLARSSL_DEBUG_C + * + * Enable the debug functions. + * + * Module: library/debug.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * + * This module provides debugging functions. + */ +#define POLARSSL_DEBUG_C + +/** + * \def POLARSSL_DES_C + * + * Enable the DES block cipher. + * + * Module: library/des.c + * Caller: library/pem.c + * library/ssl_tls.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA + * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA + * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA + * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA + * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA + * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA + * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA + * TLS_RSA_WITH_3DES_EDE_CBC_SHA + * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA + * TLS_PSK_WITH_3DES_EDE_CBC_SHA + * + * PEM_PARSE uses DES/3DES for decrypting encrypted keys. + */ +#define POLARSSL_DES_C + +/** + * \def POLARSSL_DHM_C + * + * Enable the Diffie-Hellman-Merkle module. + * + * Module: library/dhm.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * + * This module is used by the following key exchanges: + * DHE-RSA, DHE-PSK + */ +#define POLARSSL_DHM_C + +/** + * \def POLARSSL_ECDH_C + * + * Enable the elliptic curve Diffie-Hellman library. + * + * Module: library/ecdh.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * + * This module is used by the following key exchanges: + * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK + * + * Requires: POLARSSL_ECP_C + */ +#define POLARSSL_ECDH_C + +/** + * \def POLARSSL_ECDSA_C + * + * Enable the elliptic curve DSA library. + * + * Module: library/ecdsa.c + * Caller: + * + * This module is used by the following key exchanges: + * ECDHE-ECDSA + * + * Requires: POLARSSL_ECP_C, POLARSSL_ASN1_WRITE_C, POLARSSL_ASN1_PARSE_C + */ +#define POLARSSL_ECDSA_C + +/** + * \def POLARSSL_ECP_C + * + * Enable the elliptic curve over GF(p) library. + * + * Module: library/ecp.c + * Caller: library/ecdh.c + * library/ecdsa.c + * + * Requires: POLARSSL_BIGNUM_C and at least one POLARSSL_ECP_DP_XXX_ENABLED + */ +#define POLARSSL_ECP_C + +/** + * \def POLARSSL_ENTROPY_C + * + * Enable the platform-specific entropy code. + * + * Module: library/entropy.c + * Caller: + * + * Requires: POLARSSL_SHA512_C or POLARSSL_SHA256_C + * + * This module provides a generic entropy pool + */ +#define POLARSSL_ENTROPY_C + +/** + * \def POLARSSL_ERROR_C + * + * Enable error code to error string conversion. + * + * Module: library/error.c + * Caller: + * + * This module enables polarssl_strerror(). + */ +#define POLARSSL_ERROR_C + +/** + * \def POLARSSL_GCM_C + * + * Enable the Galois/Counter Mode (GCM) for AES. + * + * Module: library/gcm.c + * + * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C + * + * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other + * requisites are enabled as well. + */ +#define POLARSSL_GCM_C + +/** + * \def POLARSSL_HAVEGE_C + * + * Enable the HAVEGE random generator. + * + * Warning: the HAVEGE random generator is not suitable for virtualized + * environments + * + * Warning: the HAVEGE random generator is dependent on timing and specific + * processor traits. It is therefore not advised to use HAVEGE as + * your applications primary random generator or primary entropy pool + * input. As a secondary input to your entropy pool, it IS able add + * the (limited) extra entropy it provides. + * + * Module: library/havege.c + * Caller: + * + * Requires: POLARSSL_TIMING_C + * + * Uncomment to enable the HAVEGE random generator. + */ +//#define POLARSSL_HAVEGE_C + +/** + * \def POLARSSL_HMAC_DRBG_C + * + * Enable the HMAC_DRBG random generator. + * + * Module: library/hmac_drbg.c + * Caller: + * + * Requires: POLARSSL_MD_C + * + * Uncomment to enable the HMAC_DRBG random number geerator. + */ +#define POLARSSL_HMAC_DRBG_C + +/** + * \def POLARSSL_MD_C + * + * Enable the generic message digest layer. + * + * Module: library/md.c + * Caller: + * + * Uncomment to enable generic message digest wrappers. + */ +#define POLARSSL_MD_C + +/** + * \def POLARSSL_MD2_C + * + * Enable the MD2 hash algorithm. + * + * Module: library/md2.c + * Caller: + * + * Uncomment to enable support for (rare) MD2-signed X.509 certs. + */ +//#define POLARSSL_MD2_C + +/** + * \def POLARSSL_MD4_C + * + * Enable the MD4 hash algorithm. + * + * Module: library/md4.c + * Caller: + * + * Uncomment to enable support for (rare) MD4-signed X.509 certs. + */ +//#define POLARSSL_MD4_C + +/** + * \def POLARSSL_MD5_C + * + * Enable the MD5 hash algorithm. + * + * Module: library/md5.c + * Caller: library/md.c + * library/pem.c + * library/ssl_tls.c + * + * This module is required for SSL/TLS and X.509. + * PEM_PARSE uses MD5 for decrypting encrypted keys. + */ +#define POLARSSL_MD5_C + +/** + * \def POLARSSL_MEMORY_C + * Deprecated since 1.3.5. Please use POLARSSL_PLATFORM_MEMORY instead. + */ +//#define POLARSSL_MEMORY_C + +/** + * \def POLARSSL_MEMORY_BUFFER_ALLOC_C + * + * Enable the buffer allocator implementation that makes use of a (stack) + * based buffer to 'allocate' dynamic memory. (replaces malloc() and free() + * calls) + * + * Module: library/memory_buffer_alloc.c + * + * Requires: POLARSSL_PLATFORM_C + * POLARSSL_PLATFORM_MEMORY (to use it within PolarSSL) + * + * Enable this module to enable the buffer memory allocator. + */ +//#define POLARSSL_MEMORY_BUFFER_ALLOC_C + +/** + * \def POLARSSL_NET_C + * + * Enable the TCP/IP networking routines. + * + * Module: library/net.c + * + * This module provides TCP/IP networking routines. + */ +#define POLARSSL_NET_C + +/** + * \def POLARSSL_OID_C + * + * Enable the OID database. + * + * Module: library/oid.c + * Caller: library/asn1write.c + * library/pkcs5.c + * library/pkparse.c + * library/pkwrite.c + * library/rsa.c + * library/x509.c + * library/x509_create.c + * library/x509_crl.c + * library/x509_crt.c + * library/x509_csr.c + * library/x509write_crt.c + * library/x509write_csr.c + * + * This modules translates between OIDs and internal values. + */ +#define POLARSSL_OID_C + +/** + * \def POLARSSL_PADLOCK_C + * + * Enable VIA Padlock support on x86. + * + * Module: library/padlock.c + * Caller: library/aes.c + * + * Requires: POLARSSL_HAVE_ASM + * + * This modules adds support for the VIA PadLock on x86. + */ +//#define POLARSSL_PADLOCK_C + +/** + * \def POLARSSL_PBKDF2_C + * + * Enable PKCS#5 PBKDF2 key derivation function. + * DEPRECATED: Use POLARSSL_PKCS5_C instead + * + * Module: library/pbkdf2.c + * + * Requires: POLARSSL_PKCS5_C + * + * This module adds support for the PKCS#5 PBKDF2 key derivation function. + */ +#define POLARSSL_PBKDF2_C + +/** + * \def POLARSSL_PEM_PARSE_C + * + * Enable PEM decoding / parsing. + * + * Module: library/pem.c + * Caller: library/dhm.c + * library/pkparse.c + * library/x509_crl.c + * library/x509_crt.c + * library/x509_csr.c + * + * Requires: POLARSSL_BASE64_C + * + * This modules adds support for decoding / parsing PEM files. + */ +#define POLARSSL_PEM_PARSE_C + +/** + * \def POLARSSL_PEM_WRITE_C + * + * Enable PEM encoding / writing. + * + * Module: library/pem.c + * Caller: library/pkwrite.c + * library/x509write_crt.c + * library/x509write_csr.c + * + * Requires: POLARSSL_BASE64_C + * + * This modules adds support for encoding / writing PEM files. + */ +#define POLARSSL_PEM_WRITE_C + +/** + * \def POLARSSL_PK_C + * + * Enable the generic public (asymetric) key layer. + * + * Module: library/pk.c + * Caller: library/ssl_tls.c + * library/ssl_cli.c + * library/ssl_srv.c + * + * Requires: POLARSSL_RSA_C or POLARSSL_ECP_C + * + * Uncomment to enable generic public key wrappers. + */ +#define POLARSSL_PK_C + +/** + * \def POLARSSL_PK_PARSE_C + * + * Enable the generic public (asymetric) key parser. + * + * Module: library/pkparse.c + * Caller: library/x509_crt.c + * library/x509_csr.c + * + * Requires: POLARSSL_PK_C + * + * Uncomment to enable generic public key parse functions. + */ +#define POLARSSL_PK_PARSE_C + +/** + * \def POLARSSL_PK_WRITE_C + * + * Enable the generic public (asymetric) key writer. + * + * Module: library/pkwrite.c + * Caller: library/x509write.c + * + * Requires: POLARSSL_PK_C + * + * Uncomment to enable generic public key write functions. + */ +#define POLARSSL_PK_WRITE_C + +/** + * \def POLARSSL_PKCS5_C + * + * Enable PKCS#5 functions. + * + * Module: library/pkcs5.c + * + * Requires: POLARSSL_MD_C + * + * This module adds support for the PKCS#5 functions. + */ +#define POLARSSL_PKCS5_C + +/** + * \def POLARSSL_PKCS11_C + * + * Enable wrapper for PKCS#11 smartcard support. + * + * Module: library/pkcs11.c + * Caller: library/pk.c + * + * Requires: POLARSSL_PK_C + * + * This module enables SSL/TLS PKCS #11 smartcard support. + * Requires the presence of the PKCS#11 helper library (libpkcs11-helper) + */ +//#define POLARSSL_PKCS11_C + +/** + * \def POLARSSL_PKCS12_C + * + * Enable PKCS#12 PBE functions. + * Adds algorithms for parsing PKCS#8 encrypted private keys + * + * Module: library/pkcs12.c + * Caller: library/pkparse.c + * + * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_CIPHER_C, POLARSSL_MD_C + * Can use: POLARSSL_ARC4_C + * + * This module enables PKCS#12 functions. + */ +#define POLARSSL_PKCS12_C + +/** + * \def POLARSSL_PLATFORM_C + * + * Enable the platform abstraction layer that allows you to re-assign + * functions like malloc(), free(), printf(), fprintf() + * + * Module: library/platform.c + * Caller: Most other .c files + * + * This module enables abstraction of common (libc) functions. + */ +//#define POLARSSL_PLATFORM_C + +/** + * \def POLARSSL_RIPEMD160_C + * + * Enable the RIPEMD-160 hash algorithm. + * + * Module: library/ripemd160.c + * Caller: library/md.c + * + */ +#define POLARSSL_RIPEMD160_C + +/** + * \def POLARSSL_RSA_C + * + * Enable the RSA public-key cryptosystem. + * + * Module: library/rsa.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * library/x509.c + * + * This module is used by the following key exchanges: + * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK + * + * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C + */ +#define POLARSSL_RSA_C + +/** + * \def POLARSSL_SHA1_C + * + * Enable the SHA1 cryptographic hash algorithm. + * + * Module: library/sha1.c + * Caller: library/md.c + * library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * library/x509write_crt.c + * + * This module is required for SSL/TLS and SHA1-signed certificates. + */ +#define POLARSSL_SHA1_C + +/** + * \def POLARSSL_SHA256_C + * + * Enable the SHA-224 and SHA-256 cryptographic hash algorithms. + * (Used to be POLARSSL_SHA2_C) + * + * Module: library/sha256.c + * Caller: library/entropy.c + * library/md.c + * library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * + * This module adds support for SHA-224 and SHA-256. + * This module is required for the SSL/TLS 1.2 PRF function. + */ +#define POLARSSL_SHA256_C + +/** + * \def POLARSSL_SHA512_C + * + * Enable the SHA-384 and SHA-512 cryptographic hash algorithms. + * (Used to be POLARSSL_SHA4_C) + * + * Module: library/sha512.c + * Caller: library/entropy.c + * library/md.c + * library/ssl_cli.c + * library/ssl_srv.c + * + * This module adds support for SHA-384 and SHA-512. + */ +#define POLARSSL_SHA512_C + +/** + * \def POLARSSL_SSL_CACHE_C + * + * Enable simple SSL cache implementation. + * + * Module: library/ssl_cache.c + * Caller: + * + * Requires: POLARSSL_SSL_CACHE_C + */ +#define POLARSSL_SSL_CACHE_C + +/** + * \def POLARSSL_SSL_CLI_C + * + * Enable the SSL/TLS client code. + * + * Module: library/ssl_cli.c + * Caller: + * + * Requires: POLARSSL_SSL_TLS_C + * + * This module is required for SSL/TLS client support. + */ +#define POLARSSL_SSL_CLI_C + +/** + * \def POLARSSL_SSL_SRV_C + * + * Enable the SSL/TLS server code. + * + * Module: library/ssl_srv.c + * Caller: + * + * Requires: POLARSSL_SSL_TLS_C + * + * This module is required for SSL/TLS server support. + */ +#define POLARSSL_SSL_SRV_C + +/** + * \def POLARSSL_SSL_TLS_C + * + * Enable the generic SSL/TLS code. + * + * Module: library/ssl_tls.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * + * Requires: POLARSSL_CIPHER_C, POLARSSL_MD_C + * and at least one of the POLARSSL_SSL_PROTO_* defines + * + * This module is required for SSL/TLS. + */ +#define POLARSSL_SSL_TLS_C + +/** + * \def POLARSSL_THREADING_C + * + * Enable the threading abstraction layer. + * By default PolarSSL assumes it is used in a non-threaded environment or that + * contexts are not shared between threads. If you do intend to use contexts + * between threads, you will need to enable this layer to prevent race + * conditions. + * + * Module: library/threading.c + * + * This allows different threading implementations (self-implemented or + * provided). + * + * You will have to enable either POLARSSL_THREADING_ALT or + * POLARSSL_THREADING_PTHREAD. + * + * Enable this layer to allow use of mutexes within PolarSSL + */ +//#define POLARSSL_THREADING_C + +/** + * \def POLARSSL_TIMING_C + * + * Enable the portable timing interface. + * + * Module: library/timing.c + * Caller: library/havege.c + * + * This module is used by the HAVEGE random number generator. + */ +#define POLARSSL_TIMING_C + +/** + * \def POLARSSL_VERSION_C + * + * Enable run-time version information. + * + * Module: library/version.c + * + * This module provides run-time version information. + */ +#define POLARSSL_VERSION_C + +/** + * \def POLARSSL_X509_USE_C + * + * Enable X.509 core for using certificates. + * + * Module: library/x509.c + * Caller: library/x509_crl.c + * library/x509_crt.c + * library/x509_csr.c + * + * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_BIGNUM_C, POLARSSL_OID_C, + * POLARSSL_PK_PARSE_C + * + * This module is required for the X.509 parsing modules. + */ +#define POLARSSL_X509_USE_C + +/** + * \def POLARSSL_X509_CRT_PARSE_C + * + * Enable X.509 certificate parsing. + * + * Module: library/x509_crt.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * + * Requires: POLARSSL_X509_USE_C + * + * This module is required for X.509 certificate parsing. + */ +#define POLARSSL_X509_CRT_PARSE_C + +/** + * \def POLARSSL_X509_CRL_PARSE_C + * + * Enable X.509 CRL parsing. + * + * Module: library/x509_crl.c + * Caller: library/x509_crt.c + * + * Requires: POLARSSL_X509_USE_C + * + * This module is required for X.509 CRL parsing. + */ +#define POLARSSL_X509_CRL_PARSE_C + +/** + * \def POLARSSL_X509_CSR_PARSE_C + * + * Enable X.509 Certificate Signing Request (CSR) parsing. + * + * Module: library/x509_csr.c + * Caller: library/x509_crt_write.c + * + * Requires: POLARSSL_X509_USE_C + * + * This module is used for reading X.509 certificate request. + */ +#define POLARSSL_X509_CSR_PARSE_C + +/** + * \def POLARSSL_X509_CREATE_C + * + * Enable X.509 core for creating certificates. + * + * Module: library/x509_create.c + * + * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C, POLARSSL_PK_WRITE_C + * + * This module is the basis for creating X.509 certificates and CSRs. + */ +#define POLARSSL_X509_CREATE_C + +/** + * \def POLARSSL_X509_CRT_WRITE_C + * + * Enable creating X.509 certificates. + * + * Module: library/x509_crt_write.c + * + * Requires: POLARSSL_CREATE_C + * + * This module is required for X.509 certificate creation. + */ +#define POLARSSL_X509_CRT_WRITE_C + +/** + * \def POLARSSL_X509_CSR_WRITE_C + * + * Enable creating X.509 Certificate Signing Requests (CSR). + * + * Module: library/x509_csr_write.c + * + * Requires: POLARSSL_CREATE_C + * + * This module is required for X.509 certificate request writing. + */ +#define POLARSSL_X509_CSR_WRITE_C + +/** + * \def POLARSSL_XTEA_C + * + * Enable the XTEA block cipher. + * + * Module: library/xtea.c + * Caller: + */ +#define POLARSSL_XTEA_C + +/* \} name SECTION: PolarSSL modules */ + +/** + * \name SECTION: Module configuration options + * + * This section allows for the setting of module specific sizes and + * configuration options. The default values are already present in the + * relevant header files and should suffice for the regular use cases. + * + * Our advice is to enable options and change their values here + * only if you have a good reason and know the consequences. + * + * Please check the respective header file for documentation on these + * parameters (to prevent duplicate documentation). + * \{ + */ + +/* MPI / BIGNUM options */ +//#define POLARSSL_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ +//#define POLARSSL_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ + +/* CTR_DRBG options */ +//#define CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */ +//#define CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ +//#define CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ +//#define CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ +//#define CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ + +/* HMAC_DRBG options */ +//#define POLARSSL_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ +//#define POLARSSL_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ +//#define POLARSSL_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ +//#define POLARSSL_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ + +/* ECP options */ +//#define POLARSSL_ECP_MAX_BITS 521 /**< Maximum bit size of groups */ +//#define POLARSSL_ECP_WINDOW_SIZE 6 /**< Maximum window size used */ +//#define POLARSSL_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */ + +/* Entropy options */ +//#define ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */ +//#define ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */ + +/* Memory buffer allocator options */ +//#define POLARSSL_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */ + +/* Platform options */ +//#define POLARSSL_PLATFORM_STD_MEM_HDR /**< Header to include if POLARSSL_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */ +//#define POLARSSL_PLATFORM_STD_MALLOC malloc /**< Default allocator to use, can be undefined */ +//#define POLARSSL_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */ +//#define POLARSSL_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */ +//#define POLARSSL_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */ + +/* SSL Cache options */ +//#define SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */ +//#define SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */ + +/* SSL options */ +//#define SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */ +//#define SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ +//#define POLARSSL_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */ + +/** + * Complete list of ciphersuites to use, in order of preference. + * + * \warning No dependency checking is done on that field! This option can only + * be used to restrict the set of available ciphersuites. It is your + * responsibility to make sure the needed modules are active. + * + * Use this to save a few hundred bytes of ROM (default ordering of all + * available ciphersuites) and a few to a few hundred bytes of RAM. + * + * The value below is only an example, not the default. + */ +//#define SSL_CIPHERSUITES TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 + +/* Debug options */ +//#define POLARSSL_DEBUG_DFL_MODE POLARSSL_DEBUG_LOG_FULL /**< Default log: Full or Raw */ + +/* \} name SECTION: Module configuration options */ + + +#endif /* POLARSSL_CONFIG_H */