X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/28fdb04fd8d62e46c36f959b373d662f1a146448..905c55de2bbe642412b47ed4e92344096c817fac:/common/usb_cdc.c

diff --git a/common/usb_cdc.c b/common/usb_cdc.c
index e2787fb6..9d621777 100644
--- a/common/usb_cdc.c
+++ b/common/usb_cdc.c
@@ -46,7 +46,8 @@ const char devDescriptor[] = {
 	/* Device descriptor */
 	0x12,      // bLength
 	0x01,      // bDescriptorType
-	0x10,0x01, // Complies with USB Spec. Release (0110h = release 1.10)
+	//0x10,0x01, // Complies with USB Spec. Release (0110h = release 1.10)
+	0x00,0x02, // Complies with USB Spec. Release (0110h = release 2.00)
 	0x02,      // bDeviceClass:    CDC class code
 	0x00,      // bDeviceSubclass: CDC class sub code
 	0x00,      // bDeviceProtocol: CDC Device protocol
@@ -56,7 +57,7 @@ const char devDescriptor[] = {
 	0x01,0x00, // Device release number (0001)
 	0x01,      // iManufacturer    // 0x01
 	0x00,      // iProduct
-	0x00,      // SerialNumber
+	0xFD,      // SerialNumber
 	0x01       // bNumConfigs
 };
 
@@ -71,7 +72,7 @@ const char cfgDescriptor[] = {
 	0x01,   // CbConfigurationValue
 	0x00,   // CiConfiguration
 	0xC0,   // CbmAttributes 0xA0
-	0x00,   // CMaxPower
+	0xFA,   // CMaxPower
 
 	/* Communication Class Interface Descriptor Requirement */
 	0x09, // bLength
@@ -81,7 +82,7 @@ const char cfgDescriptor[] = {
 	0x01, // bNumEndpoints
 	0x02, // bInterfaceClass
 	0x02, // bInterfaceSubclass
-	0x00, // bInterfaceProtocol
+	0x01, // bInterfaceProtocol
 	0x00, // iInterface
 
 	/* Header Functional Descriptor */
@@ -95,7 +96,7 @@ const char cfgDescriptor[] = {
 	0x04, // bFunctionLength
 	0x24, // bDescriptor Type: CS_INTERFACE
 	0x02, // bDescriptor Subtype: ACM Func Desc
-	0x00, // bmCapabilities
+	0x02, // bmCapabilities
 
 	/* Union Functional Descriptor */
 	0x05, // bFunctionLength
@@ -152,7 +153,7 @@ const char cfgDescriptor[] = {
 };
 
 const char strDescriptor[] = {
-  26,				// Length
+  26,			// Length
   0x03,			// Type is string
   'p', 0x00,
   'r', 0x00,
@@ -168,7 +169,32 @@ const char strDescriptor[] = {
   'g', 0x00,
 };
 
-
+// Bitmap for all status bits in CSR.
+#define REG_NO_EFFECT_1_ALL      AT91C_UDP_RX_DATA_BK0 | AT91C_UDP_RX_DATA_BK1 \
+                                |AT91C_UDP_STALLSENT   | AT91C_UDP_RXSETUP \
+                                |AT91C_UDP_TXCOMP
+
+// Clear flags in the UDP_CSR register and waits for synchronization
+#define UDP_CLEAR_EP_FLAGS(endpoint, flags) { \
+	volatile unsigned int reg; \
+	reg = pUdp->UDP_CSR[(endpoint)]; \
+	reg |= REG_NO_EFFECT_1_ALL; \
+	reg &= ~(flags); \
+	pUdp->UDP_CSR[(endpoint)] = reg; \
+	while ( (pUdp->UDP_CSR[(endpoint)] & (flags)) == (flags)); \
+} \
+
+// reset flags in the UDP_CSR register and waits for synchronization
+#define UDP_SET_EP_FLAGS(endpoint, flags) { \
+	volatile unsigned int reg; \
+	reg = pUdp->UDP_CSR[(endpoint)]; \
+	reg |= REG_NO_EFFECT_1_ALL; \
+	reg |= (flags); \
+	pUdp->UDP_CSR[(endpoint)] = reg; \
+	while ( ( pUdp->UDP_CSR[(endpoint)] & (flags)) != (flags)); \
+} \
+
+	
 /* USB standard request code */
 #define STD_GET_STATUS_ZERO           0x0080
 #define STD_GET_STATUS_INTERFACE      0x0081
@@ -221,14 +247,13 @@ byte_t btReceiveBank   = AT91C_UDP_RX_DATA_BK0;
 //* \brief This function deactivates the USB device
 //*----------------------------------------------------------------------------
 void usb_disable() {
-  // Disconnect the USB device
-  AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU;
-//  SpinDelay(100);
-  
-  // Clear all lingering interrupts
-  if(pUdp->UDP_ISR & AT91C_UDP_ENDBUSRES) {
-    pUdp->UDP_ICR = AT91C_UDP_ENDBUSRES;
-  }
+	// Disconnect the USB device
+	AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU;
+
+	// Clear all lingering interrupts
+	if(pUdp->UDP_ISR & AT91C_UDP_ENDBUSRES) {
+		pUdp->UDP_ICR = AT91C_UDP_ENDBUSRES;
+	}
 }
 
 //*----------------------------------------------------------------------------
@@ -236,32 +261,32 @@ void usb_disable() {
 //* \brief This function Activates the USB device
 //*----------------------------------------------------------------------------
 void usb_enable() {
-  // Set the PLL USB Divider
-  AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ;
-  
-  // Specific Chip USB Initialisation
-  // Enables the 48MHz USB clock UDPCK and System Peripheral USB Clock
-  AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UDP;
-  AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_UDP);
-  
-  // Enable UDP PullUp (USB_DP_PUP) : enable & Clear of the corresponding PIO
-  // Set in PIO mode and Configure in Output
-  AT91C_BASE_PIOA->PIO_PER = GPIO_USB_PU; // Set in PIO mode
+	// Set the PLL USB Divider
+	AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ;
+
+	// Specific Chip USB Initialisation
+	// Enables the 48MHz USB clock UDPCK and System Peripheral USB Clock
+	AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UDP;
+	AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_UDP);
+
+	// Enable UDP PullUp (USB_DP_PUP) : enable & Clear of the corresponding PIO
+	// Set in PIO mode and Configure in Output
+	AT91C_BASE_PIOA->PIO_PER = GPIO_USB_PU; // Set in PIO mode
 	AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; // Configure as Output
-  
-  // Clear for set the Pullup resistor
+
+	// Clear for set the Pullup resistor
 	AT91C_BASE_PIOA->PIO_CODR = GPIO_USB_PU;
-  
-  // Disconnect and reconnect USB controller for 100ms
-  usb_disable();
-  
-  // Wait for a short while
-  for (volatile size_t i=0; i<0x100000; i++);
-//  SpinDelay(100);
 
-  // Reconnect USB reconnect
-  AT91C_BASE_PIOA->PIO_SODR = GPIO_USB_PU;
-  AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU;
+	// Disconnect and reconnect USB controller for 100ms
+	usb_disable();
+
+	// Wait for a short while
+	for (volatile size_t i=0; i<0x100000; i++);
+    //sleep(1);
+	
+	// Reconnect USB reconnect
+	AT91C_BASE_PIOA->PIO_SODR = GPIO_USB_PU;
+	AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU;
 }
 
 //*----------------------------------------------------------------------------
@@ -291,8 +316,23 @@ bool usb_check() {
 
 bool usb_poll()
 {
-  if (!usb_check()) return false;
-  return (pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank);
+	if (!usb_check()) return false;
+	return (pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank);
+}
+
+/**
+	In github PR #129, some users appears to get a false positive from
+	usb_poll, which returns true, but the usb_read operation
+	still returns 0.
+	This check is basically the same as above, but also checks
+	that the length available to read is non-zero, thus hopefully fixes the
+	bug.
+**/
+bool usb_poll_validate_length()
+{
+	if (!usb_check()) return false;
+	if (!(pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank)) return false;
+	return (pUdp->UDP_CSR[AT91C_EP_OUT] >> 16) >  0;
 }
 
 //*----------------------------------------------------------------------------
@@ -300,28 +340,29 @@ bool usb_poll()
 //* \brief Read available data from Endpoint OUT
 //*----------------------------------------------------------------------------
 uint32_t usb_read(byte_t* data, size_t len) {
-  byte_t bank = btReceiveBank;
+	byte_t bank = btReceiveBank;
 	uint32_t packetSize, nbBytesRcv = 0;
-  uint32_t time_out = 0;
+	uint32_t time_out = 0;
   
-	while (len)
-  {
+	while (len)  {
 		if (!usb_check()) break;
 
 		if ( pUdp->UDP_CSR[AT91C_EP_OUT] & bank ) {
 			packetSize = MIN(pUdp->UDP_CSR[AT91C_EP_OUT] >> 16, len);
-      len -= packetSize;
+			len -= packetSize;
 			while(packetSize--)
 				data[nbBytesRcv++] = pUdp->UDP_FDR[AT91C_EP_OUT];
-			pUdp->UDP_CSR[AT91C_EP_OUT] &= ~(bank);
+
+			
+			UDP_CLEAR_EP_FLAGS(AT91C_EP_OUT, bank)			
+			//pUdp->UDP_CSR[AT91C_EP_OUT] &= ~(bank);
+
 			if (bank == AT91C_UDP_RX_DATA_BK0)
-      {
 				bank = AT91C_UDP_RX_DATA_BK1;
-      } else {
-				bank = AT91C_UDP_RX_DATA_BK0;
-      }
+			else
+				bank = AT91C_UDP_RX_DATA_BK0;		
 		}
-    if (time_out++ == 0x1fff) break;
+		if (time_out++ == 0x1fff) break;
 	}
 
 	btReceiveBank = bank;
@@ -333,39 +374,46 @@ uint32_t usb_read(byte_t* data, size_t len) {
 //* \brief Send through endpoint 2
 //*----------------------------------------------------------------------------
 uint32_t usb_write(const byte_t* data, const size_t len) {
-  size_t length = len;
+	size_t length = len;
 	uint32_t cpt = 0;
 
-  if (!length) return 0;
-  if (!usb_check()) return 0;
+	if (!length) return 0;
+	if (!usb_check()) return 0;
   
 	// Send the first packet
 	cpt = MIN(length, AT91C_EP_IN_SIZE-1);
 	length -= cpt;
 	while (cpt--) pUdp->UDP_FDR[AT91C_EP_IN] = *data++;
-	pUdp->UDP_CSR[AT91C_EP_IN] |= AT91C_UDP_TXPKTRDY;
+
+	UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY)
+	//pUdp->UDP_CSR[AT91C_EP_IN] |= AT91C_UDP_TXPKTRDY;
 
 	while (length) {
 		// Fill the second bank
 		cpt = MIN(length, AT91C_EP_IN_SIZE-1);
 		length -= cpt;
 		while (cpt--) pUdp->UDP_FDR[AT91C_EP_IN] = *data++;
-		// Wait for the the first bank to be sent
+		// Wait for the first bank to be sent
 		while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) {
 			if (!usb_check()) return length;
-    }
-		pUdp->UDP_CSR[AT91C_EP_IN] &= ~(AT91C_UDP_TXCOMP);
-		while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP);
-		pUdp->UDP_CSR[AT91C_EP_IN] |= AT91C_UDP_TXPKTRDY;
+		}
+		
+		UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP)
+		//pUdp->UDP_CSR[AT91C_EP_IN] &= ~(AT91C_UDP_TXCOMP);		
+		//while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP);
+		
+		UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY)
+		//pUdp->UDP_CSR[AT91C_EP_IN] |= AT91C_UDP_TXPKTRDY;
 	}
   
 	// Wait for the end of transfer
 	while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) {
 		if (!usb_check()) return length;
-  }
-  
-	pUdp->UDP_CSR[AT91C_EP_IN] &= ~(AT91C_UDP_TXCOMP);
-	while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP);
+	}
+
+	UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP)
+	//pUdp->UDP_CSR[AT91C_EP_IN] &= ~(AT91C_UDP_TXCOMP);
+	//while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP);
 
 	return length;
 }
@@ -374,7 +422,7 @@ uint32_t usb_write(const byte_t* data, const size_t len) {
 //* \fn    AT91F_USB_SendData
 //* \brief Send Data through the control endpoint
 //*----------------------------------------------------------------------------
-unsigned int csrTab[100];
+unsigned int csrTab[100] = {0x00};
 unsigned char csrIdx = 0;
 
 static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, uint32_t length) {
@@ -389,17 +437,22 @@ static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, uint32_t leng
 			pUdp->UDP_FDR[0] = *pData++;
 
 		if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) {
-			pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
-			while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP);
+			
+			UDP_CLEAR_EP_FLAGS(0, AT91C_UDP_TXCOMP)
+			//pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
+			//while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP);
 		}
 
-		pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;
+		UDP_SET_EP_FLAGS(0, AT91C_UDP_TXPKTRDY)
+		// pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;
 		do {
 			csr = pUdp->UDP_CSR[0];
 
 			// Data IN stage has been stopped by a status OUT
 			if (csr & AT91C_UDP_RX_DATA_BK0) {
-				pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0);
+				
+				UDP_CLEAR_EP_FLAGS(0, AT91C_UDP_RX_DATA_BK0)
+				//pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0);
 				return;
 			}
 		} while ( !(csr & AT91C_UDP_TXCOMP) );
@@ -407,8 +460,10 @@ static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, uint32_t leng
 	} while (length);
 
 	if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) {
-		pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
-		while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP);
+		
+		UDP_CLEAR_EP_FLAGS(0, AT91C_UDP_TXCOMP)
+		//pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
+		//while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP);
 	}
 }
 
@@ -417,10 +472,15 @@ static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, uint32_t leng
 //* \brief Send zero length packet through the control endpoint
 //*----------------------------------------------------------------------------
 void AT91F_USB_SendZlp(AT91PS_UDP pUdp) {
-	pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;
+
+	UDP_SET_EP_FLAGS(0, AT91C_UDP_TXPKTRDY)
+	//pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;
+	
 	while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) );
-	pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
-	while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP);
+	
+	UDP_CLEAR_EP_FLAGS(0, AT91C_UDP_TXCOMP)
+	//pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
+	//while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP);
 }
 
 //*----------------------------------------------------------------------------
@@ -430,6 +490,7 @@ void AT91F_USB_SendZlp(AT91PS_UDP pUdp) {
 void AT91F_USB_SendStall(AT91PS_UDP pUdp) {
 	pUdp->UDP_CSR[0] |= AT91C_UDP_FORCESTALL;
 	while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_ISOERROR) );
+	
 	pUdp->UDP_CSR[0] &= ~(AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR);
 	while (pUdp->UDP_CSR[0] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR));
 }
@@ -455,11 +516,15 @@ void AT91F_CDC_Enumerate() {
 	wLength      |= (pUdp->UDP_FDR[0] << 8);
 
 	if (bmRequestType & 0x80) {
-		pUdp->UDP_CSR[0] |= AT91C_UDP_DIR;
-		while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_DIR) );
+
+		UDP_SET_EP_FLAGS(0, AT91C_UDP_DIR)
+		//pUdp->UDP_CSR[0] |= AT91C_UDP_DIR;
+		//while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_DIR) );
 	}
-	pUdp->UDP_CSR[0] &= ~AT91C_UDP_RXSETUP;
-	while ( (pUdp->UDP_CSR[0]  & AT91C_UDP_RXSETUP)  );
+	
+	UDP_CLEAR_EP_FLAGS(0, AT91C_UDP_RXSETUP)
+	//pUdp->UDP_CSR[0] &= ~AT91C_UDP_RXSETUP;
+	//while ( (pUdp->UDP_CSR[0]  & AT91C_UDP_RXSETUP)  );
 
 	// Handle supported standard device request Cf Table 9-3 in USB specification Rev 1.1
 	switch ((bRequest << 8) | bmRequestType) {
@@ -550,7 +615,8 @@ void AT91F_CDC_Enumerate() {
 	// handle CDC class requests
 	case SET_LINE_CODING:
 		while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_RX_DATA_BK0) );
-		pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0);
+		UDP_CLEAR_EP_FLAGS(0, AT91C_UDP_RX_DATA_BK0)
+		//pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0);
 		AT91F_USB_SendZlp(pUdp);
 		break;
 	case GET_LINE_CODING: