X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/28fdb04fd8d62e46c36f959b373d662f1a146448..9a573554e0c86736cbded236edb363cd566ffa47:/armsrc/appmain.c?ds=sidebyside diff --git a/armsrc/appmain.c b/armsrc/appmain.c index 2bd8caea..2061f6b3 100644 --- a/armsrc/appmain.c +++ b/armsrc/appmain.c @@ -214,7 +214,8 @@ void MeasureAntennaTuning(void) * ( hopefully around 95 if it is tuned to 125kHz!) */ - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); for (i=255; i>19; i--) { WDT_HIT(); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i); @@ -236,6 +237,7 @@ void MeasureAntennaTuning(void) LED_A_ON(); // Let the FPGA drive the high-frequency antenna around 13.56 MHz. + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); SpinDelay(20); // Vref = 3300mV, and an 10:1 voltage divider on the input @@ -264,6 +266,7 @@ void MeasureAntennaTuningHf(void) for (;;) { // Let the FPGA drive the high-frequency antenna around 13.56 MHz. + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); SpinDelay(20); // Vref = 3300mV, and an 10:1 voltage divider on the input @@ -286,6 +289,7 @@ void SimulateTagHfListen(void) // We're using this mode just so that I can test it out; the simulated // tag mode would work just as well and be simpler. + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP); // We need to listen to the high-frequency, peak-detected path. @@ -336,7 +340,7 @@ extern struct version_information version_information; extern char *_bootphase1_version_pointer, _flash_start, _flash_end; void SendVersion(void) { - char temp[48]; /* Limited data payload in USB packets */ + char temp[256]; /* Limited data payload in USB packets */ DbpString("Prox/RFID mark3 RFID instrument"); /* Try to find the bootrom version information. Expect to find a pointer at @@ -356,6 +360,8 @@ void SendVersion(void) FpgaGatherVersion(temp, sizeof(temp)); DbpString(temp); + // Send Chip ID + cmd_send(CMD_ACK,*(AT91C_DBGU_CIDR),0,0,NULL,0); } #ifdef WITH_LF @@ -363,6 +369,7 @@ void SendVersion(void) void SamyRun() { DbpString("Stand-alone mode! No PC necessary."); + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); // 3 possible options? no just 2 for now #define OPTS 2 @@ -626,19 +633,29 @@ void UsbPacketReceived(uint8_t *packet, int len) #ifdef WITH_LF case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K: AcquireRawAdcSamples125k(c->arg[0]); - cmd_send(CMD_ACK,0,0,0,0,0); + cmd_send(CMD_ACK,0,0,0,0,0); break; case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K: ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes); break; + case CMD_LF_SNOOP_RAW_ADC_SAMPLES: + SnoopLFRawAdcSamples(c->arg[0], c->arg[1]); + cmd_send(CMD_ACK,0,0,0,0,0); + break; case CMD_HID_DEMOD_FSK: CmdHIDdemodFSK(0, 0, 0, 1); // Demodulate HID tag break; case CMD_HID_SIM_TAG: CmdHIDsimTAG(c->arg[0], c->arg[1], 1); // Simulate HID tag by ID break; - case CMD_HID_CLONE_TAG: - CopyHIDtoT55x7(c->arg[0], c->arg[1]); // Clone HID tag by ID to T55x7 + case CMD_HID_CLONE_TAG: // Clone HID tag by ID to T55x7 + CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]); + break; + case CMD_IO_DEMOD_FSK: + CmdIOdemodFSK(1, 0, 0, 1); // Demodulate IO tag + break; + case CMD_IO_CLONE_TAG: // Clone IO tag by ID to T55x7 + CopyIOtoT55x7(c->arg[0], c->arg[1], c->d.asBytes[0]); break; case CMD_EM410X_WRITE_TAG: WriteEM410x(c->arg[0], c->arg[1], c->arg[2]); @@ -663,6 +680,26 @@ void UsbPacketReceived(uint8_t *packet, int len) case CMD_INDALA_CLONE_TAG_L: // Clone Indala 224-bit tag by UID to T55x7 CopyIndala224toT55x7(c->d.asDwords[0], c->d.asDwords[1], c->d.asDwords[2], c->d.asDwords[3], c->d.asDwords[4], c->d.asDwords[5], c->d.asDwords[6]); break; + case CMD_T55XX_READ_BLOCK: + T55xxReadBlock(c->arg[1], c->arg[2],c->d.asBytes[0]); + break; + case CMD_T55XX_WRITE_BLOCK: + T55xxWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]); + break; + case CMD_T55XX_READ_TRACE: // Clone HID tag by ID to T55x7 + T55xxReadTrace(); + break; + case CMD_PCF7931_READ: // Read PCF7931 tag + ReadPCF7931(); + cmd_send(CMD_ACK,0,0,0,0,0); +// UsbSendPacket((uint8_t*)&ack, sizeof(ack)); + break; + case CMD_EM4X_READ_WORD: + EM4xReadWord(c->arg[1], c->arg[2],c->d.asBytes[0]); + break; + case CMD_EM4X_WRITE_WORD: + EM4xWriteWord(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]); + break; #endif #ifdef WITH_HITAG @@ -724,10 +761,10 @@ void UsbPacketReceived(uint8_t *packet, int len) AcquireRawAdcSamplesIso14443(c->arg[0]); break; case CMD_READ_SRI512_TAG: - ReadSRI512Iso14443(c->arg[0]); + ReadSTMemoryIso14443(0x0F); break; case CMD_READ_SRIX4K_TAG: - ReadSRIX4KIso14443(c->arg[0]); + ReadSTMemoryIso14443(0x7F); break; case CMD_SNOOP_ISO_14443: SnoopIso14443(); @@ -735,6 +772,9 @@ void UsbPacketReceived(uint8_t *packet, int len) case CMD_SIMULATE_TAG_ISO_14443: SimulateIso14443Tag(); break; + case CMD_ISO_14443B_COMMAND: + SendRawCommand14443B(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes); + break; #endif #ifdef WITH_ISO14443a @@ -745,24 +785,36 @@ void UsbPacketReceived(uint8_t *packet, int len) ReaderIso14443a(c); break; case CMD_SIMULATE_TAG_ISO_14443a: - SimulateIso14443aTag(c->arg[0], c->arg[1], c->arg[2]); // ## Simulate iso14443a tag - pass tag type & UID + SimulateIso14443aTag(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); // ## Simulate iso14443a tag - pass tag type & UID break; case CMD_EPA_PACE_COLLECT_NONCE: EPA_PACE_Collect_Nonce(c); break; case CMD_READER_MIFARE: - ReaderMifare(c->arg[0]); + ReaderMifare(c->arg[0]); break; case CMD_MIFARE_READBL: MifareReadBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); break; + case CMD_MIFAREU_READBL: + MifareUReadBlock(c->arg[0],c->d.asBytes); + break; + case CMD_MIFAREU_READCARD: + MifareUReadCard(c->arg[0],c->d.asBytes); + break; case CMD_MIFARE_READSC: MifareReadSector(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); break; case CMD_MIFARE_WRITEBL: MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); break; + case CMD_MIFAREU_WRITEBL_COMPAT: + MifareUWriteBlock(c->arg[0], c->d.asBytes); + break; + case CMD_MIFAREU_WRITEBL: + MifareUWriteBlock_Special(c->arg[0], c->d.asBytes); + break; case CMD_MIFARE_NESTED: MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); break; @@ -810,7 +862,7 @@ void UsbPacketReceived(uint8_t *packet, int len) SnoopIClass(); break; case CMD_SIMULATE_TAG_ICLASS: - SimulateIClass(c->arg[0], c->d.asBytes); + SimulateIClass(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); break; case CMD_READER_ICLASS: ReaderIClass(c->arg[0]); @@ -843,7 +895,7 @@ void UsbPacketReceived(uint8_t *packet, int len) LED_D_OFF(); // LED D indicates field ON or OFF break; - case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K: { + case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K: // UsbCommand n; // if(c->cmd == CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K) { // n.cmd = CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K; @@ -857,29 +909,30 @@ void UsbPacketReceived(uint8_t *packet, int len) // UsbSendPacket((uint8_t *)&n, sizeof(n)); // LED_B_OFF(); - LED_B_ON(); - for(size_t i=0; iarg[1]; i += USB_CMD_DATA_SIZE) { - size_t len = MIN((c->arg[1] - i),USB_CMD_DATA_SIZE); - cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K,i,len,0,((byte_t*)BigBuf)+c->arg[0]+i,len); - } - // Trigger a finish downloading signal with an ACK frame - cmd_send(CMD_ACK,0,0,0,0,0); + LED_B_ON(); + for(size_t i=0; iarg[1]; i += USB_CMD_DATA_SIZE) { + size_t len = MIN((c->arg[1] - i),USB_CMD_DATA_SIZE); + cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K,i,len,0,((byte_t*)BigBuf)+c->arg[0]+i,len); + } + // Trigger a finish downloading signal with an ACK frame + cmd_send(CMD_ACK,0,0,0,0,0); LED_B_OFF(); - } break; + break; case CMD_DOWNLOADED_SIM_SAMPLES_125K: { uint8_t *b = (uint8_t *)BigBuf; memcpy(b+c->arg[0], c->d.asBytes, 48); //Dbprintf("copied 48 bytes to %i",b+c->arg[0]); // UsbSendPacket((uint8_t*)&ack, sizeof(ack)); - cmd_send(CMD_ACK,0,0,0,0,0); - } break; - + cmd_send(CMD_ACK,0,0,0,0,0); + break; + } case CMD_READ_MEM: ReadMem(c->arg[0]); break; case CMD_SET_LF_DIVISOR: + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->arg[0]); break; @@ -906,35 +959,35 @@ void UsbPacketReceived(uint8_t *packet, int len) #endif case CMD_SETUP_WRITE: case CMD_FINISH_WRITE: - case CMD_HARDWARE_RESET: { - usb_disable(); + case CMD_HARDWARE_RESET: + usb_disable(); SpinDelay(1000); SpinDelay(1000); AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST; for(;;) { // We're going to reset, and the bootrom will take control. } - } break; + break; - case CMD_START_FLASH: { + case CMD_START_FLASH: if(common_area.flags.bootrom_present) { common_area.command = COMMON_AREA_COMMAND_ENTER_FLASH_MODE; } - usb_disable(); + usb_disable(); AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST; for(;;); - } break; + break; case CMD_DEVICE_INFO: { uint32_t dev_info = DEVICE_INFO_FLAG_OSIMAGE_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_OS; if(common_area.flags.bootrom_present) dev_info |= DEVICE_INFO_FLAG_BOOTROM_PRESENT; // UsbSendPacket((uint8_t*)&c, sizeof(c)); - cmd_send(CMD_DEVICE_INFO,dev_info,0,0,0,0); - } break; - - default: { + cmd_send(CMD_DEVICE_INFO,dev_info,0,0,0,0); + break; + } + default: Dbprintf("%s: 0x%04x","unknown command:",c->cmd); - } break; + break; } } @@ -974,7 +1027,8 @@ void __attribute__((noreturn)) AppMain(void) AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST; // Load the FPGA image, which we have stored in our flash. - FpgaDownloadAndGo(); + // (the HF version by default) + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); StartTickCount();