X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/28fdb04fd8d62e46c36f959b373d662f1a146448..refs/pull/493/head:/common/usb_cdc.c?ds=sidebyside diff --git a/common/usb_cdc.c b/common/usb_cdc.c index e2787fb6..91a63cf3 100644 --- a/common/usb_cdc.c +++ b/common/usb_cdc.c @@ -33,34 +33,41 @@ */ #include "usb_cdc.h" +#include "at91sam7s512.h" #include "config_gpio.h" -#define MIN(a, b) (((a) < (b)) ? (a) : (b)) -#define MAX(a, b) (((a) > (b)) ? (a) : (b)) -#define AT91C_EP_IN_SIZE 0x40 + +#define AT91C_EP_CONTROL 0 #define AT91C_EP_OUT 1 -#define AT91C_EP_OUT_SIZE 0x40 #define AT91C_EP_IN 2 +#define AT91C_EP_NOTIFY 3 +#define AT91C_EP_OUT_SIZE 0x40 +#define AT91C_EP_IN_SIZE 0x40 + +// Language must always be 0. +#define STR_LANGUAGE_CODES 0x00 +#define STR_MANUFACTURER 0x01 +#define STR_PRODUCT 0x02 -const char devDescriptor[] = { +static const char devDescriptor[] = { /* Device descriptor */ 0x12, // bLength 0x01, // bDescriptorType - 0x10,0x01, // Complies with USB Spec. Release (0110h = release 1.10) - 0x02, // bDeviceClass: CDC class code - 0x00, // bDeviceSubclass: CDC class sub code - 0x00, // bDeviceProtocol: CDC Device protocol + 0x00,0x02, // Complies with USB Spec. Release (0200h = release 2.0) + 0x02, // bDeviceClass: (Communication Device Class) + 0x00, // bDeviceSubclass: (unused at this time) + 0x00, // bDeviceProtocol: (unused at this time) 0x08, // bMaxPacketSize0 - 0x2d,0x2d, // Vendor ID (--) - 0x4d,0x50, // Product ID (PM), transmitted in reverse + 0xc4,0x9a, // Vendor ID (0x9ac4 = J. Westhues) + 0x8f,0x4b, // Product ID (0x4b8f = Proxmark-3 RFID Instrument) 0x01,0x00, // Device release number (0001) - 0x01, // iManufacturer // 0x01 - 0x00, // iProduct - 0x00, // SerialNumber + STR_MANUFACTURER, // iManufacturer + STR_PRODUCT, // iProduct + 0x00, // iSerialNumber 0x01 // bNumConfigs }; -const char cfgDescriptor[] = { +static const char cfgDescriptor[] = { /* ============== CONFIGURATION 1 =========== */ /* Configuration 1 descriptor */ 0x09, // CbLength @@ -71,88 +78,95 @@ const char cfgDescriptor[] = { 0x01, // CbConfigurationValue 0x00, // CiConfiguration 0xC0, // CbmAttributes 0xA0 - 0x00, // CMaxPower + 0xFA, // CMaxPower - /* Communication Class Interface Descriptor Requirement */ + /* Interface 0 Descriptor: Communication Class Interface */ 0x09, // bLength 0x04, // bDescriptorType 0x00, // bInterfaceNumber 0x00, // bAlternateSetting 0x01, // bNumEndpoints - 0x02, // bInterfaceClass - 0x02, // bInterfaceSubclass - 0x00, // bInterfaceProtocol + 0x02, // bInterfaceClass: Communication Interface Class + 0x02, // bInterfaceSubclass: Abstract Control Model + 0x01, // bInterfaceProtocol: Common AT Commands, V.25ter 0x00, // iInterface /* Header Functional Descriptor */ 0x05, // bFunction Length - 0x24, // bDescriptor type: CS_INTERFACE - 0x00, // bDescriptor subtype: Header Func Desc + 0x24, // bDescriptor type: CS_INTERFACE + 0x00, // bDescriptor subtype: Header Functional Descriptor 0x10, // bcdCDC:1.1 0x01, /* ACM Functional Descriptor */ 0x04, // bFunctionLength - 0x24, // bDescriptor Type: CS_INTERFACE - 0x02, // bDescriptor Subtype: ACM Func Desc - 0x00, // bmCapabilities + 0x24, // bDescriptor Type: CS_INTERFACE + 0x02, // bDescriptor Subtype: Abstract Control Management Functional Descriptor + 0x02, // bmCapabilities: D1: Device supports the request combination of Set_Line_Coding, Set_Control_Line_State, Get_Line_Coding, and the notification Serial_State /* Union Functional Descriptor */ 0x05, // bFunctionLength - 0x24, // bDescriptorType: CS_INTERFACE - 0x06, // bDescriptor Subtype: Union Func Desc - 0x00, // bMasterInterface: Communication Class Interface - 0x01, // bSlaveInterface0: Data Class Interface + 0x24, // bDescriptorType: CS_INTERFACE + 0x06, // bDescriptor Subtype: Union Functional Descriptor + 0x00, // bMasterInterface: Communication Class Interface + 0x01, // bSlaveInterface0: Data Class Interface /* Call Management Functional Descriptor */ 0x05, // bFunctionLength - 0x24, // bDescriptor Type: CS_INTERFACE - 0x01, // bDescriptor Subtype: Call Management Func Desc - 0x00, // bmCapabilities: D1 + D0 - 0x01, // bDataInterface: Data Class Interface 1 + 0x24, // bDescriptor Type: CS_INTERFACE + 0x01, // bDescriptor Subtype: Call Management Functional Descriptor + 0x00, // bmCapabilities: Device sends/receives call management information only over the Communication Class interface. Device does not handle call management itself + 0x01, // bDataInterface: Data Class Interface 1 /* Endpoint 1 descriptor */ 0x07, // bLength 0x05, // bDescriptorType - 0x83, // bEndpointAddress, Endpoint 03 - IN - 0x03, // bmAttributes INT - 0x08, // wMaxPacketSize + 0x83, // bEndpointAddress: Endpoint 03 - IN + 0x03, // bmAttributes: INT + 0x08, // wMaxPacketSize: 8 0x00, 0xFF, // bInterval - /* Data Class Interface Descriptor Requirement */ + /* Interface 1 Descriptor: Data Class Interface */ 0x09, // bLength 0x04, // bDescriptorType 0x01, // bInterfaceNumber 0x00, // bAlternateSetting 0x02, // bNumEndpoints - 0x0A, // bInterfaceClass - 0x00, // bInterfaceSubclass - 0x00, // bInterfaceProtocol + 0x0A, // bInterfaceClass: Data Interface Class + 0x00, // bInterfaceSubclass: not used + 0x00, // bInterfaceProtocol: No class specific protocol required) 0x00, // iInterface - /* First alternate setting */ /* Endpoint 1 descriptor */ 0x07, // bLength 0x05, // bDescriptorType - 0x01, // bEndpointAddress, Endpoint 01 - OUT - 0x02, // bmAttributes BULK - AT91C_EP_OUT_SIZE, // wMaxPacketSize + 0x01, // bEndpointAddress: Endpoint 01 - OUT + 0x02, // bmAttributes: BULK + AT91C_EP_OUT_SIZE, // wMaxPacketSize 0x00, 0x00, // bInterval /* Endpoint 2 descriptor */ 0x07, // bLength 0x05, // bDescriptorType - 0x82, // bEndpointAddress, Endpoint 02 - IN - 0x02, // bmAttributes BULK + 0x82, // bEndpointAddress: Endpoint 02 - IN + 0x02, // bmAttributes: BULK AT91C_EP_IN_SIZE, // wMaxPacketSize 0x00, 0x00 // bInterval }; -const char strDescriptor[] = { - 26, // Length +static const char StrDescLanguageCodes[] = { + 4, // Length + 0x03, // Type is string + 0x09, 0x04 // supported language Code 0 = 0x0409 (English) +}; + +// Note: ModemManager (Linux) ignores Proxmark3 devices by matching the +// manufacturer string "proxmark.org". Don't change this. +static const char StrDescManufacturer[] = { + 26, // Length 0x03, // Type is string 'p', 0x00, 'r', 0x00, @@ -165,11 +179,55 @@ const char strDescriptor[] = { '.', 0x00, 'o', 0x00, 'r', 0x00, - 'g', 0x00, + 'g', 0x00 +}; + +static const char StrDescProduct[] = { + 8, // Length + 0x03, // Type is string + 'P', 0x00, + 'M', 0x00, + '3', 0x00 }; +const char* getStringDescriptor(uint8_t idx) +{ + switch (idx) { + case STR_LANGUAGE_CODES: + return StrDescLanguageCodes; + case STR_MANUFACTURER: + return StrDescManufacturer; + case STR_PRODUCT: + return StrDescProduct; + default: + return NULL; + } +} + +// Bitmap for all status bits in CSR which must be written as 1 to cause no effect +#define REG_NO_EFFECT_1_ALL AT91C_UDP_RX_DATA_BK0 | AT91C_UDP_RX_DATA_BK1 \ + |AT91C_UDP_STALLSENT | AT91C_UDP_RXSETUP \ + |AT91C_UDP_TXCOMP + +// Clear flags in the UDP_CSR register +#define UDP_CLEAR_EP_FLAGS(endpoint, flags) { \ + volatile unsigned int reg; \ + reg = pUdp->UDP_CSR[(endpoint)]; \ + reg |= REG_NO_EFFECT_1_ALL; \ + reg &= ~(flags); \ + pUdp->UDP_CSR[(endpoint)] = reg; \ +} + +// Set flags in the UDP_CSR register +#define UDP_SET_EP_FLAGS(endpoint, flags) { \ + volatile unsigned int reg; \ + reg = pUdp->UDP_CSR[(endpoint)]; \ + reg |= REG_NO_EFFECT_1_ALL; \ + reg |= (flags); \ + pUdp->UDP_CSR[(endpoint)] = reg; \ +} -/* USB standard request code */ +/* USB standard request codes */ #define STD_GET_STATUS_ZERO 0x0080 #define STD_GET_STATUS_INTERFACE 0x0081 #define STD_GET_STATUS_ENDPOINT 0x0082 @@ -209,6 +267,7 @@ AT91S_CDC_LINE_CODING line = { 0, // None Parity 8}; // 8 Data bits + void AT91F_CDC_Enumerate(); AT91PS_UDP pUdp = AT91C_BASE_UDP; @@ -216,54 +275,55 @@ byte_t btConfiguration = 0; byte_t btConnection = 0; byte_t btReceiveBank = AT91C_UDP_RX_DATA_BK0; + //*---------------------------------------------------------------------------- //* \fn usb_disable //* \brief This function deactivates the USB device //*---------------------------------------------------------------------------- void usb_disable() { - // Disconnect the USB device - AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU; -// SpinDelay(100); - - // Clear all lingering interrupts - if(pUdp->UDP_ISR & AT91C_UDP_ENDBUSRES) { - pUdp->UDP_ICR = AT91C_UDP_ENDBUSRES; - } + // Disconnect the USB device + AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU; + + // Clear all lingering interrupts + if(pUdp->UDP_ISR & AT91C_UDP_ENDBUSRES) { + pUdp->UDP_ICR = AT91C_UDP_ENDBUSRES; + } } + //*---------------------------------------------------------------------------- //* \fn usb_enable //* \brief This function Activates the USB device //*---------------------------------------------------------------------------- void usb_enable() { - // Set the PLL USB Divider - AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ; - - // Specific Chip USB Initialisation - // Enables the 48MHz USB clock UDPCK and System Peripheral USB Clock - AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UDP; - AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_UDP); - - // Enable UDP PullUp (USB_DP_PUP) : enable & Clear of the corresponding PIO - // Set in PIO mode and Configure in Output - AT91C_BASE_PIOA->PIO_PER = GPIO_USB_PU; // Set in PIO mode + // Set the PLL USB Divider + AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ; + + // Specific Chip USB Initialisation + // Enables the 48MHz USB clock UDPCK and System Peripheral USB Clock + AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UDP; + AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_UDP); + + // Enable UDP PullUp (USB_DP_PUP) : enable & Clear of the corresponding PIO + // Set in PIO mode and Configure in Output + AT91C_BASE_PIOA->PIO_PER = GPIO_USB_PU; // Set in PIO mode AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; // Configure as Output - - // Clear for set the Pullup resistor + + // Clear for set the Pullup resistor AT91C_BASE_PIOA->PIO_CODR = GPIO_USB_PU; - - // Disconnect and reconnect USB controller for 100ms - usb_disable(); - - // Wait for a short while - for (volatile size_t i=0; i<0x100000; i++); -// SpinDelay(100); - // Reconnect USB reconnect - AT91C_BASE_PIOA->PIO_SODR = GPIO_USB_PU; - AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; + // Disconnect and reconnect USB controller for 100ms + usb_disable(); + + // Wait for a short while + for (volatile size_t i=0; i<0x100000; i++); + + // Reconnect USB reconnect + AT91C_BASE_PIOA->PIO_SODR = GPIO_USB_PU; + AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; } + //*---------------------------------------------------------------------------- //* \fn usb_check //* \brief Test if the device is configured and handle enumeration @@ -279,9 +339,8 @@ bool usb_check() { // Enable the function pUdp->UDP_FADDR = AT91C_UDP_FEN; // Configure endpoint 0 - pUdp->UDP_CSR[0] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL); - } - else if (isr & AT91C_UDP_EPINT0) { + pUdp->UDP_CSR[AT91C_EP_CONTROL] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL); + } else if (isr & AT91C_UDP_EPINT0) { pUdp->UDP_ICR = AT91C_UDP_EPINT0; AT91F_CDC_Enumerate(); } @@ -291,8 +350,24 @@ bool usb_check() { bool usb_poll() { - if (!usb_check()) return false; - return (pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank); + if (!usb_check()) return false; + return (pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank); +} + + +/** + In github PR #129, some users appears to get a false positive from + usb_poll, which returns true, but the usb_read operation + still returns 0. + This check is basically the same as above, but also checks + that the length available to read is non-zero, thus hopefully fixes the + bug. +**/ +bool usb_poll_validate_length() +{ + if (!usb_check()) return false; + if (!(pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank)) return false; + return (pUdp->UDP_CSR[AT91C_EP_OUT] >> 16) > 0; } //*---------------------------------------------------------------------------- @@ -300,81 +375,85 @@ bool usb_poll() //* \brief Read available data from Endpoint OUT //*---------------------------------------------------------------------------- uint32_t usb_read(byte_t* data, size_t len) { - byte_t bank = btReceiveBank; + byte_t bank = btReceiveBank; uint32_t packetSize, nbBytesRcv = 0; - uint32_t time_out = 0; + uint32_t time_out = 0; - while (len) - { + while (len) { if (!usb_check()) break; if ( pUdp->UDP_CSR[AT91C_EP_OUT] & bank ) { packetSize = MIN(pUdp->UDP_CSR[AT91C_EP_OUT] >> 16, len); - len -= packetSize; + len -= packetSize; while(packetSize--) data[nbBytesRcv++] = pUdp->UDP_FDR[AT91C_EP_OUT]; - pUdp->UDP_CSR[AT91C_EP_OUT] &= ~(bank); - if (bank == AT91C_UDP_RX_DATA_BK0) - { + UDP_CLEAR_EP_FLAGS(AT91C_EP_OUT, bank); + if (bank == AT91C_UDP_RX_DATA_BK0) { bank = AT91C_UDP_RX_DATA_BK1; - } else { + } else { bank = AT91C_UDP_RX_DATA_BK0; - } + } } - if (time_out++ == 0x1fff) break; + if (time_out++ == 0x1fff) break; } btReceiveBank = bank; return nbBytesRcv; } + //*---------------------------------------------------------------------------- //* \fn usb_write //* \brief Send through endpoint 2 //*---------------------------------------------------------------------------- uint32_t usb_write(const byte_t* data, const size_t len) { - size_t length = len; + size_t length = len; uint32_t cpt = 0; - if (!length) return 0; - if (!usb_check()) return 0; - + if (!length) return 0; + if (!usb_check()) return 0; + // Send the first packet - cpt = MIN(length, AT91C_EP_IN_SIZE-1); + cpt = MIN(length, AT91C_EP_IN_SIZE); length -= cpt; - while (cpt--) pUdp->UDP_FDR[AT91C_EP_IN] = *data++; - pUdp->UDP_CSR[AT91C_EP_IN] |= AT91C_UDP_TXPKTRDY; + while (cpt--) { + pUdp->UDP_FDR[AT91C_EP_IN] = *data++; + } + UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY); while (length) { - // Fill the second bank - cpt = MIN(length, AT91C_EP_IN_SIZE-1); + // Fill the next bank + cpt = MIN(length, AT91C_EP_IN_SIZE); length -= cpt; - while (cpt--) pUdp->UDP_FDR[AT91C_EP_IN] = *data++; - // Wait for the the first bank to be sent + while (cpt--) { + pUdp->UDP_FDR[AT91C_EP_IN] = *data++; + } + // Wait for the previous bank to be sent while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) { if (!usb_check()) return length; - } - pUdp->UDP_CSR[AT91C_EP_IN] &= ~(AT91C_UDP_TXCOMP); + } + UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP); while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP); - pUdp->UDP_CSR[AT91C_EP_IN] |= AT91C_UDP_TXPKTRDY; + UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY); } - + // Wait for the end of transfer while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) { if (!usb_check()) return length; - } - - pUdp->UDP_CSR[AT91C_EP_IN] &= ~(AT91C_UDP_TXCOMP); + } + + UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP); while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP); return length; } + //*---------------------------------------------------------------------------- //* \fn AT91F_USB_SendData //* \brief Send Data through the control endpoint //*---------------------------------------------------------------------------- -unsigned int csrTab[100]; +unsigned int csrTab[100] = {0x00}; unsigned char csrIdx = 0; static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, uint32_t length) { @@ -388,52 +467,55 @@ static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, uint32_t leng while (cpt--) pUdp->UDP_FDR[0] = *pData++; - if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) { - pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP); + if (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) { + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP); + while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP); } - pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY; + UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY); do { - csr = pUdp->UDP_CSR[0]; + csr = pUdp->UDP_CSR[AT91C_EP_CONTROL]; // Data IN stage has been stopped by a status OUT if (csr & AT91C_UDP_RX_DATA_BK0) { - pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0); + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0); return; } } while ( !(csr & AT91C_UDP_TXCOMP) ); } while (length); - if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) { - pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP); + if (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) { + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP); + while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP); } } + //*---------------------------------------------------------------------------- //* \fn AT91F_USB_SendZlp //* \brief Send zero length packet through the control endpoint //*---------------------------------------------------------------------------- void AT91F_USB_SendZlp(AT91PS_UDP pUdp) { - pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY; - while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) ); - pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP); + UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY); + while ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) ); + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP); + while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP); } + //*---------------------------------------------------------------------------- //* \fn AT91F_USB_SendStall //* \brief Stall the control endpoint //*---------------------------------------------------------------------------- void AT91F_USB_SendStall(AT91PS_UDP pUdp) { - pUdp->UDP_CSR[0] |= AT91C_UDP_FORCESTALL; - while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_ISOERROR) ); - pUdp->UDP_CSR[0] &= ~(AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR); - while (pUdp->UDP_CSR[0] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR)); + UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL); + while ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_ISOERROR) ); + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR); + while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR)); } + //*---------------------------------------------------------------------------- //* \fn AT91F_CDC_Enumerate //* \brief This function is a callback invoked when a SETUP packet is received @@ -442,24 +524,24 @@ void AT91F_CDC_Enumerate() { byte_t bmRequestType, bRequest; uint16_t wValue, wIndex, wLength, wStatus; - if ( !(pUdp->UDP_CSR[0] & AT91C_UDP_RXSETUP) ) + if ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP) ) return; - bmRequestType = pUdp->UDP_FDR[0]; - bRequest = pUdp->UDP_FDR[0]; - wValue = (pUdp->UDP_FDR[0] & 0xFF); - wValue |= (pUdp->UDP_FDR[0] << 8); - wIndex = (pUdp->UDP_FDR[0] & 0xFF); - wIndex |= (pUdp->UDP_FDR[0] << 8); - wLength = (pUdp->UDP_FDR[0] & 0xFF); - wLength |= (pUdp->UDP_FDR[0] << 8); - - if (bmRequestType & 0x80) { - pUdp->UDP_CSR[0] |= AT91C_UDP_DIR; - while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_DIR) ); + bmRequestType = pUdp->UDP_FDR[AT91C_EP_CONTROL]; + bRequest = pUdp->UDP_FDR[AT91C_EP_CONTROL]; + wValue = (pUdp->UDP_FDR[AT91C_EP_CONTROL] & 0xFF); + wValue |= (pUdp->UDP_FDR[AT91C_EP_CONTROL] << 8); + wIndex = (pUdp->UDP_FDR[AT91C_EP_CONTROL] & 0xFF); + wIndex |= (pUdp->UDP_FDR[AT91C_EP_CONTROL] << 8); + wLength = (pUdp->UDP_FDR[AT91C_EP_CONTROL] & 0xFF); + wLength |= (pUdp->UDP_FDR[AT91C_EP_CONTROL] << 8); + + if (bmRequestType & 0x80) { // Data Phase Transfer Direction Device to Host + UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_DIR); + while ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_DIR) ); } - pUdp->UDP_CSR[0] &= ~AT91C_UDP_RXSETUP; - while ( (pUdp->UDP_CSR[0] & AT91C_UDP_RXSETUP) ); + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RXSETUP); + while ( (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP) ); // Handle supported standard device request Cf Table 9-3 in USB specification Rev 1.1 switch ((bRequest << 8) | bmRequestType) { @@ -468,8 +550,14 @@ void AT91F_CDC_Enumerate() { AT91F_USB_SendData(pUdp, devDescriptor, MIN(sizeof(devDescriptor), wLength)); else if (wValue == 0x200) // Return Configuration Descriptor AT91F_USB_SendData(pUdp, cfgDescriptor, MIN(sizeof(cfgDescriptor), wLength)); - else if ((wValue & 0x300) == 0x300) // Return String Descriptor - AT91F_USB_SendData(pUdp, strDescriptor, MIN(sizeof(strDescriptor), wLength)); + else if ((wValue & 0xF00) == 0x300) { // Return String Descriptor + const char *strDescriptor = getStringDescriptor(wValue & 0xff); + if (strDescriptor != NULL) { + AT91F_USB_SendData(pUdp, strDescriptor, MIN(strDescriptor[0], wLength)); + } else { + AT91F_USB_SendStall(pUdp); + } + } else AT91F_USB_SendStall(pUdp); break; @@ -482,29 +570,29 @@ void AT91F_CDC_Enumerate() { btConfiguration = wValue; AT91F_USB_SendZlp(pUdp); pUdp->UDP_GLBSTATE = (wValue) ? AT91C_UDP_CONFG : AT91C_UDP_FADDEN; - pUdp->UDP_CSR[1] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT) : 0; - pUdp->UDP_CSR[2] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN) : 0; - pUdp->UDP_CSR[3] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN) : 0; + pUdp->UDP_CSR[AT91C_EP_OUT] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT) : 0; + pUdp->UDP_CSR[AT91C_EP_IN] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN) : 0; + pUdp->UDP_CSR[AT91C_EP_NOTIFY] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN) : 0; break; case STD_GET_CONFIGURATION: AT91F_USB_SendData(pUdp, (char *) &(btConfiguration), sizeof(btConfiguration)); break; case STD_GET_STATUS_ZERO: - wStatus = 0; + wStatus = 0; // Device is Bus powered, remote wakeup disabled AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); break; case STD_GET_STATUS_INTERFACE: - wStatus = 0; + wStatus = 0; // reserved for future use AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); break; case STD_GET_STATUS_ENDPOINT: wStatus = 0; wIndex &= 0x0F; - if ((pUdp->UDP_GLBSTATE & AT91C_UDP_CONFG) && (wIndex <= 3)) { + if ((pUdp->UDP_GLBSTATE & AT91C_UDP_CONFG) && (wIndex <= AT91C_EP_NOTIFY)) { wStatus = (pUdp->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1; AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); } - else if ((pUdp->UDP_GLBSTATE & AT91C_UDP_FADDEN) && (wIndex == 0)) { + else if ((pUdp->UDP_GLBSTATE & AT91C_UDP_FADDEN) && (wIndex == AT91C_EP_CONTROL)) { wStatus = (pUdp->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1; AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); } @@ -519,7 +607,7 @@ void AT91F_CDC_Enumerate() { break; case STD_SET_FEATURE_ENDPOINT: wIndex &= 0x0F; - if ((wValue == 0) && wIndex && (wIndex <= 3)) { + if ((wValue == 0) && (wIndex >= AT91C_EP_OUT) && (wIndex <= AT91C_EP_NOTIFY)) { pUdp->UDP_CSR[wIndex] = 0; AT91F_USB_SendZlp(pUdp); } @@ -534,13 +622,13 @@ void AT91F_CDC_Enumerate() { break; case STD_CLEAR_FEATURE_ENDPOINT: wIndex &= 0x0F; - if ((wValue == 0) && wIndex && (wIndex <= 3)) { - if (wIndex == 1) - pUdp->UDP_CSR[1] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT); - else if (wIndex == 2) - pUdp->UDP_CSR[2] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN); - else if (wIndex == 3) - pUdp->UDP_CSR[3] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_ISO_IN); + if ((wValue == 0) && (wIndex >= AT91C_EP_OUT) && (wIndex <= AT91C_EP_NOTIFY)) { + if (wIndex == AT91C_EP_OUT) + pUdp->UDP_CSR[AT91C_EP_OUT] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT); + else if (wIndex == AT91C_EP_IN) + pUdp->UDP_CSR[AT91C_EP_IN] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN); + else if (wIndex == AT91C_EP_NOTIFY) + pUdp->UDP_CSR[AT91C_EP_NOTIFY] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN); AT91F_USB_SendZlp(pUdp); } else @@ -549,8 +637,8 @@ void AT91F_CDC_Enumerate() { // handle CDC class requests case SET_LINE_CODING: - while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_RX_DATA_BK0) ); - pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0); + while ( !(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RX_DATA_BK0) ); + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0); AT91F_USB_SendZlp(pUdp); break; case GET_LINE_CODING: