X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/2da2e9283771f20e4fb809709ea1c97c0636e455..refs/pull/493/head:/armsrc/util.c?ds=inline diff --git a/armsrc/util.c b/armsrc/util.c index 8576ddce..e25c6e0b 100644 --- a/armsrc/util.c +++ b/armsrc/util.c @@ -292,6 +292,7 @@ void FormatVersionInformation(char *dst, int len, const char *prefix, void *vers strncat(dst, "\n", len - strlen(dst) - 1); } + // ------------------------------------------------------------------------- // timer lib // ------------------------------------------------------------------------- @@ -304,13 +305,15 @@ void FormatVersionInformation(char *dst, int len, const char *prefix, void *vers void StartTickCount() { -// must be 0x40, but on my cpu - included divider is optimal -// 0x20 - 1 ms / bit -// 0x40 - 2 ms / bit - - AT91C_BASE_RTTC->RTTC_RTMR = AT91C_RTTC_RTTRST + 0x001D; // was 0x003B + // This timer is based on the slow clock. The slow clock frequency is between 22kHz and 40kHz. + // We can determine the actual slow clock frequency by looking at the Main Clock Frequency Register. + uint16_t mainf = AT91C_BASE_PMC->PMC_MCFR & 0xffff; // = 16 * main clock frequency (16MHz) / slow clock frequency + // set RealTimeCounter divider to count at 1kHz: + AT91C_BASE_RTTC->RTTC_RTMR = AT91C_RTTC_RTTRST | ((256000 + (mainf/2)) / mainf); + // note: worst case precision is approx 2.5% } + /* * Get the current count. */ @@ -318,6 +321,7 @@ uint32_t RAMFUNC GetTickCount(){ return AT91C_BASE_RTTC->RTTC_RTVR;// was * 2; } + // ------------------------------------------------------------------------- // microseconds timer // ------------------------------------------------------------------------- @@ -343,10 +347,12 @@ void StartCountUS() AT91C_BASE_TCB->TCB_BCR = 1; } + uint32_t RAMFUNC GetCountUS(){ - return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV / 15) * 10); + return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV * 2) / 3); //was /15) * 10); } + static uint32_t GlobalUsCounter = 0; uint32_t RAMFUNC GetDeltaCountUS(){ @@ -401,7 +407,7 @@ void StartCountSspClk() AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN; // enable TC2 // - // synchronize the counter with the ssp_frame signal. Note: FPGA must be in any iso14446 mode, otherwise the frame signal would not be present + // synchronize the counter with the ssp_frame signal. Note: FPGA must be in any iso14443 mode, otherwise SSC_FRAME and SSC_CLK signals would not be present // while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME)); // wait for ssp_frame to go high (start of frame) while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME); // wait for ssp_frame to be low @@ -415,7 +421,17 @@ void StartCountSspClk() // (just started with the transfer of the 4th Bit). // The high word of the counter (TC2) will not reset until the low word (TC0) overflows. Therefore need to wait quite some time before // we can use the counter. - while (AT91C_BASE_TC0->TC_CV < 0xFFF0); + while (AT91C_BASE_TC0->TC_CV < 0xFFFF); + // Note: needs one more SSP_CLK cycle (1.18 us) until TC2 resets. Don't call GetCountSspClk() that soon. +} + + +void ResetSspClk(void) { + //enable clock of timer and software trigger + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + while (AT91C_BASE_TC2->TC_CV > 0); } @@ -430,3 +446,92 @@ uint32_t RAMFUNC GetCountSspClk(){ } } + +// ------------------------------------------------------------------------- +// Timer for bitbanging, or LF stuff when you need a very precis timer +// 1us = 1.5ticks +// ------------------------------------------------------------------------- +void StartTicks(void){ + //initialization of the timer + // tc1 is higher 0xFFFF0000 + // tc0 is lower 0x0000FFFF + AT91C_BASE_PMC->PMC_PCER |= (1 << AT91C_ID_TC0) | (1 << AT91C_ID_TC1); + AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_TIOA0 | AT91C_TCB_TC2XC2S_NONE; + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; + AT91C_BASE_TC0->TC_CMR = AT91C_TC_CLKS_TIMER_DIV3_CLOCK | // MCK(48MHz) / 32 + AT91C_TC_WAVE | AT91C_TC_WAVESEL_UP_AUTO | AT91C_TC_ACPA_CLEAR | + AT91C_TC_ACPC_SET | AT91C_TC_ASWTRG_SET; + AT91C_BASE_TC0->TC_RA = 1; + AT91C_BASE_TC0->TC_RC = 0; + + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; // timer disable + AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_XC1; // from TC0 + + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + AT91C_BASE_TCB->TCB_BCR = 1; + + // wait until timer becomes zero. + while (AT91C_BASE_TC1->TC_CV > 0); +} + + +// Wait - Spindelay in ticks. +// if called with a high number, this will trigger the WDT... +void WaitTicks(uint32_t ticks){ + if ( ticks == 0 ) return; + ticks += GET_TICKS; + while (GET_TICKS < ticks); +} + + +// Wait / Spindelay in us (microseconds) +// 1us = 1.5ticks. +void WaitUS(uint16_t us){ + if ( us == 0 ) return; + WaitTicks( (uint32_t)(us * 1.5) ); +} + + +void WaitMS(uint16_t ms){ + if (ms == 0) return; + WaitTicks( (uint32_t)(ms * 1500) ); +} + + +// Starts Clock and waits until its reset +void ResetTicks(void){ + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + while (AT91C_BASE_TC1->TC_CV > 0); +} + + +void ResetTimer(AT91PS_TC timer){ + timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + while(timer->TC_CV > 0) ; +} + + +// stop clock +void StopTicks(void){ + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; +} + + +static uint64_t next_random = 1; + +/* Generates a (non-cryptographically secure) 32-bit random number. + * + * We don't have an implementation of the "rand" function or a clock to seed it + * with, so we just call GetTickCount the first time to seed ourselves. + */ +uint32_t prand() { + if (next_random == 1) { + next_random = GetTickCount(); + } + + next_random = next_random * 6364136223846793005 + 1; + return (uint32_t)(next_random >> 32) % 0xffffffff; +}