X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/4c36581b96dfb81c85f34a4229d82e51edeaf499..966c111e8c8e45e624465502d0ee405ebda9a39c:/client/cmdlft55xx.c diff --git a/client/cmdlft55xx.c b/client/cmdlft55xx.c index d104d7d7..5b650b30 100644 --- a/client/cmdlft55xx.c +++ b/client/cmdlft55xx.c @@ -6,29 +6,7 @@ //----------------------------------------------------------------------------- // Low frequency T55xx commands //----------------------------------------------------------------------------- - -#include -#include -#include -//#include -#include "proxmark3.h" -#include "ui.h" -#include "graph.h" -#include "cmdmain.h" -#include "cmdparser.h" -#include "cmddata.h" -#include "cmdlf.h" #include "cmdlft55xx.h" -#include "util.h" -#include "data.h" -#include "lfdemod.h" -#include "cmdhf14a.h" - -#define T55x7_CONFIGURATION_BLOCK 0x00 -#define T55x7_PAGE0 0x00 -#define T55x7_PAGE1 0x01 -#define T55x7_PWD 0x00000010 -#define REGULAR_READ_MODE_BLOCK 0xFF // Default configuration t55xx_conf_block_t config = { .modulation = DEMOD_ASK, .inverted = FALSE, .offset = 0x00, .block0 = 0x00, .Q5 = FALSE }; @@ -43,12 +21,13 @@ void Set_t55xx_Config(t55xx_conf_block_t conf){ int usage_t55xx_config(){ PrintAndLog("Usage: lf t55xx config [d ] [i 1] [o ] [Q5]"); PrintAndLog("Options:"); - PrintAndLog(" h This help"); - PrintAndLog(" b <8|16|32|40|50|64|100|128> Set bitrate"); - PrintAndLog(" d Set demodulation FSK / ASK / PSK / NRZ / Biphase / Biphase A"); - PrintAndLog(" i [1] Invert data signal, defaults to normal"); - PrintAndLog(" o [offset] Set offset, where data should start decode in bitstream"); - PrintAndLog(" Q5 Set as Q5(T5555) chip instead of T55x7"); + PrintAndLog(" h - This help"); + PrintAndLog(" b <8|16|32|40|50|64|100|128> - Set bitrate"); + PrintAndLog(" d - Set demodulation FSK / ASK / PSK / NRZ / Biphase / Biphase A"); + PrintAndLog(" i [1] - Invert data signal, defaults to normal"); + PrintAndLog(" o [offset] - Set offset, where data should start decode in bitstream"); + PrintAndLog(" Q5 - Set as Q5(T5555) chip instead of T55x7"); + PrintAndLog(" ST - Set Sequence Terminator on"); PrintAndLog(""); PrintAndLog("Examples:"); PrintAndLog(" lf t55xx config d FSK - FSK demodulation"); @@ -92,7 +71,7 @@ int usage_t55xx_write(){ int usage_t55xx_trace() { PrintAndLog("Usage: lf t55xx trace [1]"); PrintAndLog("Options:"); - PrintAndLog(" [graph buffer data] - if set, use Graphbuffer otherwise read data from tag."); + PrintAndLog(" 1 - if set, use Graphbuffer otherwise read data from tag."); PrintAndLog(""); PrintAndLog("Examples:"); PrintAndLog(" lf t55xx trace"); @@ -103,7 +82,7 @@ int usage_t55xx_trace() { int usage_t55xx_info() { PrintAndLog("Usage: lf t55xx info [1]"); PrintAndLog("Options:"); - PrintAndLog(" [graph buffer data] - if set, use Graphbuffer otherwise read data from tag."); + PrintAndLog(" 1 - if set, use Graphbuffer otherwise read data from tag."); PrintAndLog(""); PrintAndLog("Examples:"); PrintAndLog(" lf t55xx info"); @@ -150,7 +129,8 @@ int usage_t55xx_wakup(){ int usage_t55xx_bruteforce(){ PrintAndLog("This command uses A) bruteforce to scan a number range"); PrintAndLog(" B) a dictionary attack"); - PrintAndLog("Usage: lf t55xx bruteforce [i <*.dic>]"); + PrintAndLog("press 'enter' to cancel the command"); + PrintAndLog("Usage: lf t55xx bruteforce [h] [i <*.dic>]"); PrintAndLog(" password must be 4 bytes (8 hex symbols)"); PrintAndLog("Options:"); PrintAndLog(" h - this help"); @@ -164,12 +144,28 @@ int usage_t55xx_bruteforce(){ PrintAndLog(""); return 0; } -int usage_t55xx_wipe(){ +int usage_t55xx_recoverpw(){ + PrintAndLog("This command uses a few tricks to try to recover mangled password"); + PrintAndLog("press 'enter' to cancel the command"); + PrintAndLog("WARNING: this may brick non-password protected chips!"); + PrintAndLog("Usage: lf t55xx recoverpw [password]"); + PrintAndLog(" password must be 4 bytes (8 hex symbols)"); + PrintAndLog(" default password is 51243648, used by many cloners"); + PrintAndLog("Options:"); + PrintAndLog(" h - this help"); + PrintAndLog(" [password] - 4 byte hex value of password written by cloner"); + PrintAndLog(""); + PrintAndLog("Examples:"); + PrintAndLog(" lf t55xx recoverpw"); + PrintAndLog(" lf t55xx recoverpw 51243648"); + PrintAndLog(""); + return 0; +}int usage_t55xx_wipe(){ PrintAndLog("Usage: lf t55xx wipe [h] [Q5]"); PrintAndLog("This commands wipes a tag, fills blocks 1-7 with zeros and a default configuration block"); PrintAndLog("Options:"); PrintAndLog(" h - this help"); - PrintAndLog(" Q5 - indicates to use the T555 (Q5) default configuration block"); + PrintAndLog(" Q5 - indicates to use the T5555 (Q5) default configuration block"); PrintAndLog(""); PrintAndLog("Examples:"); PrintAndLog(" lf t55xx wipe - wipes a t55x7 tag, config block 0x000880E0"); @@ -180,8 +176,8 @@ static int CmdHelp(const char *Cmd); void printT5xxHeader(uint8_t page){ PrintAndLog("Reading Page %d:", page); - PrintAndLog("blk | hex data | binary"); - PrintAndLog("----+----------+---------------------------------"); + PrintAndLog("blk | hex data | binary | ascii"); + PrintAndLog("----+----------+----------------------------------+-------"); } int CmdT55xxSetConfig(const char *Cmd) { @@ -269,6 +265,11 @@ int CmdT55xxSetConfig(const char *Cmd) { config.Q5 = TRUE; cmdp++; break; + case 'S': + case 's': + config.ST = TRUE; + cmdp++; + break; default: PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp)); errors = TRUE; @@ -371,6 +372,7 @@ bool DecodeT55xxBlock(){ char buf[30] = {0x00}; char *cmdStr = buf; int ans = 0; + bool ST = config.ST; uint8_t bitRate[8] = {8,16,32,40,50,64,100,128}; DemodBufferLen = 0x00; @@ -391,7 +393,7 @@ bool DecodeT55xxBlock(){ break; case DEMOD_ASK: snprintf(cmdStr, sizeof(buf),"%d %d 1", bitRate[config.bitrate], config.inverted ); - ans = ASKDemod(cmdStr, FALSE, FALSE, 1); + ans = ASKDemod_ext(cmdStr, FALSE, FALSE, 1, &ST); break; case DEMOD_PSK1: // skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise) @@ -435,6 +437,14 @@ bool DecodeT5555TraceBlock() { return (bool) ASKDemod("64 0 1", FALSE, FALSE, 1); } +// sanity check. Don't use proxmark if it is offline and you didn't specify useGraphbuf +static int SanityOfflineCheck( bool useGraphBuffer ){ + if ( !useGraphBuffer && offline) { + PrintAndLog("Your proxmark3 device is offline. Specify [1] to use graphbuffer data instead"); + return 0; + } + return 1; +} int CmdT55xxDetect(const char *Cmd){ bool errors = FALSE; @@ -467,15 +477,18 @@ int CmdT55xxDetect(const char *Cmd){ } if (errors) return usage_t55xx_detect(); + // sanity check. + if (!SanityOfflineCheck(useGB)) return 1; + if ( !useGB) { if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, usepwd, password) ) - return 0; + return 1; } if ( !tryDetectModulation() ) PrintAndLog("Could not detect modulation automatically. Try setting it manually with \'lf t55xx config\'"); - return 1; + return 0; } // detect configuration? @@ -496,6 +509,7 @@ bool tryDetectModulation(){ tests[hits].bitrate = bitRate; tests[hits].inverted = FALSE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + tests[hits].ST = FALSE; ++hits; } if ( FSKrawDemod("0 1", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { @@ -507,19 +521,32 @@ bool tryDetectModulation(){ tests[hits].bitrate = bitRate; tests[hits].inverted = TRUE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + tests[hits].ST = FALSE; ++hits; } } else { clk = GetAskClock("", FALSE, FALSE); if (clk>0) { - if ( ASKDemod("0 0 1", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { + tests[hits].ST = TRUE; + // "0 0 1 " == clock auto, invert false, maxError 1. + // false = no verbose + // false = no emSearch + // 1 = Ask/Man + // st = true + if ( ASKDemod_ext("0 0 1", FALSE, FALSE, 1, &tests[hits].ST) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { tests[hits].modulation = DEMOD_ASK; tests[hits].bitrate = bitRate; tests[hits].inverted = FALSE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); ++hits; } - if ( ASKDemod("0 1 1", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { + tests[hits].ST = TRUE; + // "0 0 1 " == clock auto, invert true, maxError 1. + // false = no verbose + // false = no emSearch + // 1 = Ask/Man + // st = true + if ( ASKDemod_ext("0 1 1", FALSE, FALSE, 1, &tests[hits].ST) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { tests[hits].modulation = DEMOD_ASK; tests[hits].bitrate = bitRate; tests[hits].inverted = TRUE; @@ -531,6 +558,7 @@ bool tryDetectModulation(){ tests[hits].bitrate = bitRate; tests[hits].inverted = FALSE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + tests[hits].ST = FALSE; ++hits; } if ( ASKbiphaseDemod("0 0 1 2", FALSE) && test(DEMOD_BIa, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) { @@ -538,6 +566,7 @@ bool tryDetectModulation(){ tests[hits].bitrate = bitRate; tests[hits].inverted = TRUE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + tests[hits].ST = FALSE; ++hits; } } @@ -550,6 +579,7 @@ bool tryDetectModulation(){ tests[hits].bitrate = bitRate; tests[hits].inverted = FALSE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + tests[hits].ST = FALSE; ++hits; } @@ -558,6 +588,7 @@ bool tryDetectModulation(){ tests[hits].bitrate = bitRate; tests[hits].inverted = TRUE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + tests[hits].ST = FALSE; ++hits; } } @@ -573,6 +604,7 @@ bool tryDetectModulation(){ tests[hits].bitrate = bitRate; tests[hits].inverted = FALSE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + tests[hits].ST = FALSE; ++hits; } if ( PSKDemod("0 1 6", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { @@ -580,8 +612,10 @@ bool tryDetectModulation(){ tests[hits].bitrate = bitRate; tests[hits].inverted = TRUE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + tests[hits].ST = FALSE; ++hits; } + //ICEMAN: are these PSKDemod calls needed? // PSK2 - needs a call to psk1TOpsk2. if ( PSKDemod("0 0 6", FALSE)) { psk1TOpsk2(DemodBuffer, DemodBufferLen); @@ -590,6 +624,7 @@ bool tryDetectModulation(){ tests[hits].bitrate = bitRate; tests[hits].inverted = FALSE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + tests[hits].ST = FALSE; ++hits; } } // inverse waves does not affect this demod @@ -601,6 +636,7 @@ bool tryDetectModulation(){ tests[hits].bitrate = bitRate; tests[hits].inverted = FALSE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + tests[hits].ST = FALSE; ++hits; } } // inverse waves does not affect this demod @@ -615,17 +651,51 @@ bool tryDetectModulation(){ config.offset = tests[0].offset; config.block0 = tests[0].block0; config.Q5 = tests[0].Q5; + config.ST = tests[0].ST; printConfiguration( config ); return TRUE; } + bool retval = FALSE; if ( hits > 1) { PrintAndLog("Found [%d] possible matches for modulation.",hits); for(int i=0; i 1 || cmdp == 'h' || cmdp == 'H') return usage_t55xx_trace(); - if (strlen(Cmd)==0) + if (strlen(Cmd)==0) { + // sanity check. + if (!SanityOfflineCheck(FALSE)) return 1; + if ( !AquireData( T55x7_PAGE1, REGULAR_READ_MODE_BLOCK, pwdmode, password ) ) - return 0; + return 1; + } if ( config.Q5 ){ - if (!DecodeT5555TraceBlock()) return 0; - } - else { - if (!DecodeT55xxBlock()) return 0; + if (!DecodeT5555TraceBlock()) return 1; + } else { + if (!DecodeT55xxBlock()) return 1; } - if ( !DemodBufferLen ) return 0; + if ( !DemodBufferLen ) return 1; RepaintGraphWindow(); uint8_t repeat = (config.offset > 5) ? 32 : 0; @@ -975,7 +1051,7 @@ int CmdT55xxReadTrace(const char *Cmd) { if (hdr != 0x1FF) { PrintAndLog("Invalid Q5 Trace data header (expected 0x1FF, found %X)", hdr); - return 0; + return 1; } t5555_tracedata_t data = {.bl1 = bl1, .bl2 = bl2, .icr = 0, .lotidc = '?', .lotid = 0, .wafer = 0, .dw =0}; @@ -1009,12 +1085,12 @@ int CmdT55xxReadTrace(const char *Cmd) { } else { - t55xx_tracedata_t data = {.bl1 = bl1, .bl2 = bl2, .acl = 0, .mfc = 0, .cid = 0, .year = 0, .quarter = 0, .icr = 0, .lotid = 0, .wafer = 0, .dw = 0}; + t55x7_tracedata_t data = {.bl1 = bl1, .bl2 = bl2, .acl = 0, .mfc = 0, .cid = 0, .year = 0, .quarter = 0, .icr = 0, .lotid = 0, .wafer = 0, .dw = 0}; data.acl = PackBits(si, 8, DemodBuffer); si += 8; if ( data.acl != 0xE0 ) { PrintAndLog("The modulation is most likely wrong since the ACL is not 0xE0. "); - return 0; + return 1; } data.mfc = PackBits(si, 8, DemodBuffer); si += 8; @@ -1033,14 +1109,13 @@ int CmdT55xxReadTrace(const char *Cmd) { else data.year += 2010; - - printT55xxTrace(data, repeat); + printT55x7Trace(data, repeat); } return 0; } -void printT55xxTrace( t55xx_tracedata_t data, uint8_t repeat ){ - PrintAndLog("-- T55xx Trace Information ----------------------------------"); +void printT55x7Trace( t55x7_tracedata_t data, uint8_t repeat ){ + PrintAndLog("-- T55x7 Trace Information ----------------------------------"); PrintAndLog("-------------------------------------------------------------"); PrintAndLog(" ACL Allocation class (ISO/IEC 15963-1) : 0x%02X (%d)", data.acl, data.acl); PrintAndLog(" MFC Manufacturer ID (ISO/IEC 7816-6) : 0x%02X (%d) - %s", data.mfc, data.mfc, getTagInfo(data.mfc)); @@ -1074,6 +1149,7 @@ void printT55xxTrace( t55xx_tracedata_t data, uint8_t repeat ){ 18-32 DW, die number sequential */ } + void printT5555Trace( t5555_tracedata_t data, uint8_t repeat ){ PrintAndLog("-- T5555 (Q5) Trace Information -----------------------------"); PrintAndLog("-------------------------------------------------------------"); @@ -1101,6 +1177,7 @@ void printT5555Trace( t5555_tracedata_t data, uint8_t repeat ){ */ } +//need to add Q5 info... int CmdT55xxInfo(const char *Cmd){ /* Page 0 Block 0 Configuration data. @@ -1113,9 +1190,13 @@ int CmdT55xxInfo(const char *Cmd){ if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') return usage_t55xx_info(); - if (strlen(Cmd)==0) + if (strlen(Cmd)==0){ + // sanity check. + if (!SanityOfflineCheck(FALSE)) return 1; + if ( !AquireData( T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, pwdmode, password ) ) return 1; + } if (!DecodeT55xxBlock()) return 1; @@ -1144,7 +1225,7 @@ int CmdT55xxInfo(const char *Cmd){ if (config.Q5) PrintAndLog("*** Warning *** Config Info read off a Q5 will not display as expected"); PrintAndLog(""); - PrintAndLog("-- T55xx Configuration & Tag Information --------------------"); + PrintAndLog("-- T55x7 Configuration & Tag Information --------------------"); PrintAndLog("-------------------------------------------------------------"); PrintAndLog(" Safer key : %s", GetSaferStr(safer)); PrintAndLog(" reserved : %d", resv); @@ -1195,21 +1276,26 @@ int CmdT55xxDump(const char *Cmd){ int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password ){ // arg0 bitmodes: - // bit0 = pwdmode - // bit1 = page to read from + // bit0 = pwdmode + // bit1 = page to read from + // arg1: which block to read + // arg2: password uint8_t arg0 = (page<<1) | pwdmode; UsbCommand c = {CMD_T55XX_READ_BLOCK, {arg0, block, password}}; - clearCommandBuffer(); SendCommand(&c); - if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) { + if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2500) ) { PrintAndLog("command execution time out"); return 0; } - uint8_t got[12000]; - GetFromBigBuf(got,sizeof(got),0); - WaitForResponse(CMD_ACK,NULL); + //uint8_t got[12288]; + uint8_t got[7679]; + GetFromBigBuf(got, sizeof(got), 0); + if ( !WaitForResponseTimeout(CMD_ACK, NULL, 8000) ) { + PrintAndLog("command execution time out"); + return 0; + } setGraphBuf(got, sizeof(got)); return 1; } @@ -1325,10 +1411,9 @@ void t55x7_create_config_block( int tagtype ){ int CmdResetRead(const char *Cmd) { UsbCommand c = {CMD_T55XX_RESET_READ, {0,0,0}}; - clearCommandBuffer(); SendCommand(&c); - if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) { + if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2500) ) { PrintAndLog("command execution time out"); return 0; } @@ -1352,11 +1437,10 @@ int CmdT55xxWipe(const char *Cmd) { // With a pwd should work even if pwd bit not set PrintAndLog("\nBeginning Wipe of a T55xx tag (assuming the tag is not password protected)\n"); - if ( Q5 ){ + if ( Q5 ) snprintf(ptrData,sizeof(writeData),"b 0 d 6001F004 p 0"); - } else { + else snprintf(ptrData,sizeof(writeData),"b 0 d 000880E0 p 0"); - } if (!CmdT55xxWriteBlock(ptrData)) PrintAndLog("Error writing blk 0"); @@ -1371,27 +1455,35 @@ int CmdT55xxWipe(const char *Cmd) { return 0; } +bool IsCancelled(void) { + if (ukbhit()) { + int ch = getchar(); + (void)ch; + printf("\naborted via keyboard!\n"); + return TRUE; + } + return FALSE; +} + int CmdT55xxBruteForce(const char *Cmd) { // load a default pwd file. - char buf[9]; + char line[9]; char filename[FILE_PATH_SIZE]={0}; int keycnt = 0; - int c; uint8_t stKeyBlock = 20; uint8_t *keyBlock = NULL, *p = NULL; - keyBlock = calloc(stKeyBlock, 6); - if (keyBlock == NULL) return 1; - uint32_t start_password = 0x00000000; //start password uint32_t end_password = 0xFFFFFFFF; //end password bool found = false; + memset(line, 0, sizeof(line)); + char cmdp = param_getchar(Cmd, 0); - if (cmdp == 'h' || cmdp == 'H') { - free(keyBlock); - return usage_t55xx_bruteforce(); - } + if (cmdp == 'h' || cmdp == 'H') return usage_t55xx_bruteforce(); + + keyBlock = calloc(stKeyBlock, 4); + if (keyBlock == NULL) return 1; if (cmdp == 'i' || cmdp == 'I') { @@ -1399,46 +1491,52 @@ int CmdT55xxBruteForce(const char *Cmd) { if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE; memcpy(filename, Cmd+2, len); - FILE * f = fopen( filename , "r"); - + FILE * f = fopen( filename , "r"); if ( !f ) { PrintAndLog("File: %s: not found or locked.", filename); free(keyBlock); return 1; } - - while( fgets(buf, sizeof(buf), f) ){ - if (strlen(buf) < 8 || buf[7] == '\n') continue; - while (fgetc(f) != '\n' && !feof(f)) ; //goto next line - + while( fgets(line, sizeof(line), f) ){ + if (strlen(line) < 8 || line[7] == '\n') continue; + + //goto next line + while (fgetc(f) != '\n' && !feof(f)) ; + //The line start with # is comment, skip - if( buf[0]=='#' ) continue; + if( line[0]=='#' ) continue; - if (!isxdigit(buf[0])){ - PrintAndLog("File content error. '%s' must include 8 HEX symbols", buf); + if (!isxdigit(line[0])) { + PrintAndLog("File content error. '%s' must include 8 HEX symbols", line); continue; } - buf[8] = 0; - + line[8] = 0; + + // realloc keyblock array size. if ( stKeyBlock - keycnt < 2) { - p = realloc(keyBlock, 6*(stKeyBlock+=10)); + p = realloc(keyBlock, 4 * (stKeyBlock += 10)); if (!p) { PrintAndLog("Cannot allocate memory for defaultKeys"); free(keyBlock); - fclose(f); + if (f) + fclose(f); return 2; } keyBlock = p; } + // clear mem memset(keyBlock + 4 * keycnt, 0, 4); - num_to_bytes(strtoll(buf, NULL, 16), 4, keyBlock + 4*keycnt); - PrintAndLog("chk custom pwd[%2d] %08X", keycnt, bytes_to_num(keyBlock + 4*keycnt, 4)); - keycnt++; - memset(buf, 0, sizeof(buf)); + + num_to_bytes( strtoll(line, NULL, 16), 4, keyBlock + 4*keycnt); + + PrintAndLog("chk custom pwd[%2d] %08X", keycnt, bytes_to_num(keyBlock + 4 * keycnt, 4) ); + keycnt++; + memset(line, 0, sizeof(line)); } - fclose(f); + if (f) + fclose(f); if (keycnt == 0) { PrintAndLog("No keys found in file"); @@ -1450,11 +1548,14 @@ int CmdT55xxBruteForce(const char *Cmd) { // loop uint64_t testpwd = 0x00; for (uint16_t c = 0; c < keycnt; ++c ) { - - if (ukbhit()) { - c = getchar(); - (void)c; - printf("\naborted via keyboard!\n"); + + if ( offline ) { + printf("Device offline\n"); + free(keyBlock); + return 2; + } + + if (IsCancelled()) { free(keyBlock); return 0; } @@ -1462,20 +1563,18 @@ int CmdT55xxBruteForce(const char *Cmd) { testpwd = bytes_to_num(keyBlock + 4*c, 4); PrintAndLog("Testing %08X", testpwd); - - + if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, TRUE, testpwd)) { - PrintAndLog("Aquireing data from device failed. Quitting"); + PrintAndLog("Acquire data from device failed. Quitting"); free(keyBlock); return 0; } found = tryDetectModulation(); - if ( found ) { PrintAndLog("Found valid password: [%08X]", testpwd); - free(keyBlock); - return 0; + //free(keyBlock); + //return 0; } } PrintAndLog("Password NOT found."); @@ -1502,16 +1601,14 @@ int CmdT55xxBruteForce(const char *Cmd) { printf("."); fflush(stdout); - if (ukbhit()) { - c = getchar(); - (void)c; - printf("\naborted via keyboard!\n"); + + if (IsCancelled()) { free(keyBlock); return 0; } if (!AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, TRUE, i)) { - PrintAndLog("Aquireing data from device failed. Quitting"); + PrintAndLog("Acquire data from device failed. Quitting"); free(keyBlock); return 0; } @@ -1532,19 +1629,107 @@ int CmdT55xxBruteForce(const char *Cmd) { return 0; } +int tryOnePassword(uint32_t password) { + PrintAndLog("Trying password %08x", password); + if (!AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, TRUE, password)) { + PrintAndLog("Acquire data from device failed. Quitting"); + return -1; + } + + if (tryDetectModulation()) + return 1; + else + return 0; +} + +int CmdT55xxRecoverPW(const char *Cmd) { + int bit = 0; + uint32_t orig_password = 0x0; + uint32_t curr_password = 0x0; + uint32_t prev_password = 0xffffffff; + uint32_t mask = 0x0; + int found = 0; + char cmdp = param_getchar(Cmd, 0); + if (cmdp == 'h' || cmdp == 'H') return usage_t55xx_recoverpw(); + + orig_password = param_get32ex(Cmd, 0, 0x51243648, 16); //password used by handheld cloners + + // first try fliping each bit in the expected password + while (bit < 32) { + curr_password = orig_password ^ ( 1 << bit ); + found = tryOnePassword(curr_password); + if (found == -1) return 0; + bit++; + + if (IsCancelled()) return 0; + } + + // now try to use partial original password, since block 7 should have been completely + // erased during the write sequence and it is possible that only partial password has been + // written + // not sure from which end the bit bits are written, so try from both ends + // from low bit to high bit + bit = 0; + while (bit < 32) { + mask += ( 1 << bit ); + curr_password = orig_password & mask; + // if updated mask didn't change the password, don't try it again + if (prev_password == curr_password) { + bit++; + continue; + } + found = tryOnePassword(curr_password); + if (found == -1) return 0; + bit++; + prev_password = curr_password; + + if (IsCancelled()) return 0; + } + + // from high bit to low + bit = 0; + mask = 0xffffffff; + while (bit < 32) { + mask -= ( 1 << bit ); + curr_password = orig_password & mask; + // if updated mask didn't change the password, don't try it again + if (prev_password == curr_password) { + bit++; + continue; + } + found = tryOnePassword(curr_password); + if (found == -1) + return 0; + bit++; + prev_password = curr_password; + + if (IsCancelled()) return 0; + } + + PrintAndLog(""); + + if (found == 1) + PrintAndLog("Found valid password: [%08x]", curr_password); + else + PrintAndLog("Password NOT found."); + + return 0; +} + static command_t CommandTable[] = { {"help", CmdHelp, 1, "This help"}, - {"bruteforce",CmdT55xxBruteForce,0, " [i <*.dic>] Simple bruteforce attack to find password"}, + {"bruteforce", CmdT55xxBruteForce,0, " [i <*.dic>] Simple bruteforce attack to find password"}, {"config", CmdT55xxSetConfig, 1, "Set/Get T55XX configuration (modulation, inverted, offset, rate)"}, {"detect", CmdT55xxDetect, 1, "[1] Try detecting the tag modulation from reading the configuration block."}, {"dump", CmdT55xxDump, 0, "[password] [o] Dump T55xx card block 0-7. Optional [password], [override]"}, {"info", CmdT55xxInfo, 1, "[1] Show T55x7 configuration data (page 0/ blk 0)"}, {"read", CmdT55xxReadBlock, 0, "b p [password] [o] [1] -- Read T55xx block data. Optional [p password], [override], [page1]"}, {"resetread", CmdResetRead, 0, "Send Reset Cmd then lf read the stream to attempt to identify the start of it (needs a demod and/or plot after)"}, + {"recoverpw", CmdT55xxRecoverPW, 0, "[password] Try to recover from bad password write from a cloner. Only use on PW protected chips!"}, {"special", special, 0, "Show block changes with 64 different offsets"}, {"trace", CmdT55xxReadTrace, 1, "[1] Show T55x7 traceability data (page 1/ blk 0-1)"}, {"wakeup", CmdT55xxWakeUp, 0, "Send AOR wakeup command"}, - {"wipe", CmdT55xxWipe, 0, "Wipe a T55xx tag and set defaults (will destroy any data on tag)"}, + {"wipe", CmdT55xxWipe, 0, "[q] Wipe a T55xx tag and set defaults (will destroy any data on tag)"}, {"write", CmdT55xxWriteBlock,0, "b d p [password] [1] -- Write T55xx block data. Optional [p password], [page1]"}, {NULL, NULL, 0, NULL} };