X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/58e93ff593ee67e1c41fa790110dc60f09b91cc4..12d708fec157dfde6f94d61e5fdc265713a71578:/armsrc/lfops.c diff --git a/armsrc/lfops.c b/armsrc/lfops.c index 468f5830..887e8404 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -37,15 +37,15 @@ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, sample_config sc = { 0,0,1, divisor_used, 0}; setSamplingConfig(&sc); - /* Make sure the tag is reset */ - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelay(2500); + /* Make sure the tag is reset */ + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + SpinDelay(2500); LFSetupFPGAForADC(sc.divisor, 1); - // And a little more time for the tag to fully power up - SpinDelay(2000); + // And a little more time for the tag to fully power up + SpinDelay(2000); // now modulate the reader field while(*command != '\0' && *command != ' ') { @@ -72,8 +72,6 @@ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, DoAcquisition_config(false); } - - /* blank r/w tag data stream ...0000000000000000 01111111 1010101010101010101010101010101010101010101010101010101010101010 @@ -381,7 +379,7 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc) DbpString("Now use tiread to check"); } -void SimulateTagLowFrequency(int period, int gap, int ledcontrol) +void SimulateTagLowFrequency(uint16_t period, uint32_t gap, uint8_t ledcontrol) { int i; uint8_t *tab = BigBuf_get_addr(); @@ -739,7 +737,7 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) if (ledcontrol) LED_A_ON(); DoAcquisition_default(-1,true); - // FSK demodulator + // FSK demodulator size = sizeOfBigBuff; //variable size will change after demod so re initialize it before use idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo); @@ -828,7 +826,7 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol) if (ledcontrol) LED_A_ON(); DoAcquisition_default(-1,true); - size = BigBuf_max_traceLen(); + size = BigBuf_max_traceLen(); //Dbprintf("DEBUG: Buffer got"); //askdemod and manchester decode errCnt = askmandemod(dest, &size, &clk, &invert, maxErr); @@ -881,7 +879,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) WDT_HIT(); if (ledcontrol) LED_A_ON(); DoAcquisition_default(-1,true); - //fskdemod and get start index + //fskdemod and get start index WDT_HIT(); idx = IOdemodFSK(dest, BigBuf_max_traceLen()); if (idx>0){ @@ -990,10 +988,20 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) * To compensate antenna falling times shorten the write times * and enlarge the gap ones. */ -#define START_GAP 250 -#define WRITE_GAP 160 -#define WRITE_0 144 // 192 -#define WRITE_1 400 // 432 for T55x7; 448 for E5550 +#define START_GAP 30*8 // 10 - 50fc 250 +#define WRITE_GAP 20*8 // 8 - 30fc +#define WRITE_0 24*8 // 16 - 31fc 24fc 192 +#define WRITE_1 54*8 // 48 - 63fc 54fc 432 for T55x7; 448 for E5550 + +// VALUES TAKEN FROM EM4x function: SendForward +// START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle) +// WRITE_GAP = 128; (16*8) +// WRITE_1 = 256 32*8; (32*8) + +// These timings work for 4469/4269/4305 (with the 55*8 above) +// WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8); + +#define T55xx_SAMPLES_SIZE 12000 // 32 x 32 x 10 (32 bit times numofblock (7), times clock skip..) // Write one bit to card void T55xxWriteBit(int bit) @@ -1001,7 +1009,7 @@ void T55xxWriteBit(int bit) FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); - if (bit == 0) + if (!bit) SpinDelayUs(WRITE_0); else SpinDelayUs(WRITE_1); @@ -1012,16 +1020,11 @@ void T55xxWriteBit(int bit) // Write one card block in page 0, no lock void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMode) { - //unsigned int i; //enio adjustment 12/10/14 - uint32_t i; - - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); + uint32_t i = 0; - // Give it a bit of time for the resonant antenna to settle. - // And for the tag to fully power up - SpinDelay(150); + // Set up FPGA, 125kHz + // Wait for config.. (192+8190xPOW)x8 == 67ms + LFSetupFPGAForADC(0, true); // Now start writting FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); @@ -1057,27 +1060,17 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod // Read one card block in page 0 void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode) { + uint32_t i = 0; uint8_t *dest = BigBuf_get_addr(); - //int m=0, i=0; //enio adjustment 12/10/14 - uint32_t m=0, i=0; - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); - m = BigBuf_max_traceLen(); - // Clear destination buffer before sending the command - memset(dest, 128, m); - // Connect the A/D to the peak-detected low-frequency path. - SetAdcMuxFor(GPIO_MUXSEL_LOPKD); - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); - - LED_D_ON(); - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); - - // Give it a bit of time for the resonant antenna to settle. - // And for the tag to fully power up - SpinDelay(150); - - // Now start writting + uint16_t bufferlength = BigBuf_max_traceLen(); + if ( bufferlength > T55xx_SAMPLES_SIZE ) + bufferlength = T55xx_SAMPLES_SIZE; + + memset(dest, 0x80, bufferlength); + + // Set up FPGA, 125kHz + // Wait for config.. (192+8190xPOW)x8 == 67ms + LFSetupFPGAForADC(0, true); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); SpinDelayUs(START_GAP); @@ -1096,53 +1089,40 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode) T55xxWriteBit(Block & i); // Turn field on to read the response - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); + TurnReadLFOn(); // Now do the acquisition i = 0; for(;;) { if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) { AT91C_BASE_SSC->SSC_THR = 0x43; + LED_D_ON(); } if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR; - // we don't care about actual value, only if it's more or less than a - // threshold essentially we capture zero crossings for later analysis - // if(dest[i] < 127) dest[i] = 0; else dest[i] = 1; - i++; - if (i >= m) break; + ++i; + LED_D_OFF(); + if (i >= bufferlength) break; } } + cmd_send(CMD_ACK,0,0,0,0,0); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off LED_D_OFF(); - DbpString("DONE!"); } // Read card traceability data (page 1) void T55xxReadTrace(void){ - uint8_t *dest = BigBuf_get_addr(); - int m=0, i=0; - - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); - m = BigBuf_max_traceLen(); - // Clear destination buffer before sending the command - memset(dest, 128, m); - // Connect the A/D to the peak-detected low-frequency path. - SetAdcMuxFor(GPIO_MUXSEL_LOPKD); - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); - - LED_D_ON(); - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); - // Give it a bit of time for the resonant antenna to settle. - // And for the tag to fully power up - SpinDelay(150); + uint32_t i = 0; + uint8_t *dest = BigBuf_get_addr(); + uint16_t bufferlength = BigBuf_max_traceLen(); + if ( bufferlength > T55xx_SAMPLES_SIZE ) + bufferlength = T55xx_SAMPLES_SIZE; - // Now start writting + memset(dest, 0x80, bufferlength); + + LFSetupFPGAForADC(0, true); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); SpinDelayUs(START_GAP); @@ -1151,25 +1131,34 @@ void T55xxReadTrace(void){ T55xxWriteBit(1); //Page 1 // Turn field on to read the response - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); + TurnReadLFOn(); // Now do the acquisition - i = 0; for(;;) { if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) { AT91C_BASE_SSC->SSC_THR = 0x43; + LED_D_ON(); } if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR; - i++; - if (i >= m) break; - } - } - + ++i; + LED_D_OFF(); + + if (i >= bufferlength) break; + } + } + + cmd_send(CMD_ACK,0,0,0,0,0); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off LED_D_OFF(); - DbpString("DONE!"); +} + +void TurnReadLFOn(){ + //FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); + // Give it a bit of time for the resonant antenna to settle. + //SpinDelay(30); + SpinDelayUs(9*150); } /*-------------- Cloning routines -----------*/ @@ -1474,9 +1463,10 @@ void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int #define max(x,y) ( x GraphBuffer[0]) { + if(dest[1] > dest[0]) { while(i < GraphTraceLen) { - if( !(GraphBuffer[i] > GraphBuffer[i-1]) && GraphBuffer[i] > lmax) + if( !(dest[i] > dest[i-1]) && dest[i] > lmax) break; i++; } @@ -1507,7 +1496,7 @@ int DemodPCF7931(uint8_t **outBlocks) { } else { while(i < GraphTraceLen) { - if( !(GraphBuffer[i] < GraphBuffer[i-1]) && GraphBuffer[i] < lmin) + if( !(dest[i] < dest[i-1]) && v[i] < lmin) break; i++; } @@ -1521,7 +1510,7 @@ int DemodPCF7931(uint8_t **outBlocks) { for (bitidx = 0; i < GraphTraceLen; i++) { - if ( (GraphBuffer[i-1] > GraphBuffer[i] && dir == 1 && GraphBuffer[i] > lmax) || (GraphBuffer[i-1] < GraphBuffer[i] && dir == 0 && GraphBuffer[i] < lmin)) + if ( (dest[i-1] > dest[i] && dir == 1 && dest[i] > lmax) || (dest[i-1] < dest[i] && dir == 0 && dest[i] < lmin)) { lc = i - lastval; lastval = i; @@ -1588,7 +1577,7 @@ int DemodPCF7931(uint8_t **outBlocks) { } if(i < GraphTraceLen) { - if (GraphBuffer[i-1] > GraphBuffer[i]) dir=0; + if (dest[i-1] > dest[i]) dir=0; else dir = 1; } } @@ -1895,9 +1884,14 @@ void EM4xLogin(uint32_t Password) { void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { + uint8_t *dest = BigBuf_get_addr(); + uint16_t bufferlength = BigBuf_max_traceLen(); + uint32_t i = 0; + + // Clear destination buffer before sending the command 0x80 = average. + memset(dest, 0x80, bufferlength); + uint8_t fwd_bit_count; - uint8_t *dest = BigBuf_get_addr(); - int m=0, i=0; //If password mode do login if (PwdMode == 1) EM4xLogin(Pwd); @@ -1906,9 +1900,6 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { fwd_bit_count = Prepare_Cmd( FWD_CMD_READ ); fwd_bit_count += Prepare_Addr( Address ); - m = BigBuf_max_traceLen(); - // Clear destination buffer before sending the command - memset(dest, 128, m); // Connect the A/D to the peak-detected low-frequency path. SetAdcMuxFor(GPIO_MUXSEL_LOPKD); // Now set up the SSC to get the ADC samples that are now streaming at us. @@ -1924,10 +1915,12 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { } if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR; - i++; - if (i >= m) break; - } - } + ++i; + if (i >= bufferlength) break; + } + } + + cmd_send(CMD_ACK,0,0,0,0,0); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off LED_D_OFF(); }