X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/6426f6ba86c8a2d3e390fab1ced35223a92d8647..3b875041dc994ee4fefb788e8d1309b68baa4706:/armsrc/lfops.c?ds=sidebyside diff --git a/armsrc/lfops.c b/armsrc/lfops.c index 00b50852..90b8d0b3 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -17,56 +17,63 @@ #include "lfdemod.h" #include "lfsampling.h" #include "protocols.h" -#include "usb_cdc.h" //test +#include "usb_cdc.h" // for usb_poll_validate_length + +#ifndef SHORT_COIL +# define SHORT_COIL() LOW(GPIO_SSC_DOUT) +#endif +#ifndef OPEN_COIL +# define OPEN_COIL() HIGH(GPIO_SSC_DOUT) +#endif /** * Function to do a modulation and then get samples. * @param delay_off - * @param period_0 - * @param period_1 + * @param periods 0xFFFF0000 is period_0, 0x0000FFFF is period_1 + * @param useHighFreg * @param command */ -void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint32_t period_1, uint8_t *command) +void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t periods, uint32_t useHighFreq, uint8_t *command) { + /* Make sure the tag is reset */ + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + SpinDelay(200); - int divisor_used = 95; // 125 KHz - // see if 'h' was specified - - if (command[strlen((char *) command) - 1] == 'h') - divisor_used = 88; // 134.8 KHz - + uint16_t period_0 = periods >> 16; + uint16_t period_1 = periods & 0xFFFF; + + // 95 == 125 KHz 88 == 124.8 KHz + int divisor_used = (useHighFreq) ? 88 : 95; sample_config sc = { 0,0,1, divisor_used, 0}; setSamplingConfig(&sc); - /* Make sure the tag is reset */ - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelay(2500); + //clear read buffer + BigBuf_Clear_keep_EM(); LFSetupFPGAForADC(sc.divisor, 1); // And a little more time for the tag to fully power up - SpinDelay(2000); + SpinDelay(50); // now modulate the reader field while(*command != '\0' && *command != ' ') { FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); - SpinDelayUs(delay_off); + WaitUS(delay_off); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); LED_D_ON(); if(*(command++) == '0') - SpinDelayUs(period_0); + WaitUS(period_0); else - SpinDelayUs(period_1); + WaitUS(period_1); } FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); - SpinDelayUs(delay_off); + WaitUS(delay_off); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor); - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // now do the read @@ -84,6 +91,7 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint */ void ReadTItag(void) { + StartTicks(); // some hardcoded initial params // when we read a TI tag we sample the zerocross line at 2Mhz // TI tags modulate a 1 as 16 cycles of 123.2Khz @@ -202,14 +210,14 @@ void ReadTItag(void) crc = update_crc16(crc, (shift1>>16)&0xff); crc = update_crc16(crc, (shift1>>24)&0xff); - Dbprintf("Info: Tag data: %x%08x, crc=%x", - (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF); + Dbprintf("Info: Tag data: %x%08x, crc=%x", (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF); if (crc != (shift2&0xffff)) { Dbprintf("Error: CRC mismatch, expected %x", (unsigned int)crc); } else { DbpString("Info: CRC is good"); } } + StopTicks(); } void WriteTIbyte(uint8_t b) @@ -219,20 +227,20 @@ void WriteTIbyte(uint8_t b) // modulate 8 bits out to the antenna for (i=0; i<8; i++) { - if (b&(1<SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(32) | AT91C_SSC_MSBF; AT91C_BASE_SSC->SSC_TCMR = 0; AT91C_BASE_SSC->SSC_TFMR = 0; - + // iceman, FpgaSetupSsc() ?? the code above? can it be replaced? LED_D_ON(); // modulate antenna HIGH(GPIO_SSC_DOUT); // Charge TI tag for 50ms. - SpinDelay(50); + WaitMS(50); // stop modulating antenna and listen LOW(GPIO_SSC_DOUT); @@ -316,6 +324,7 @@ void AcquireTiType(void) // if not provided a valid crc will be computed from the data and written. void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc) { + StartTicks(); FpgaDownloadAndGo(FPGA_BITSTREAM_LF); if(crc == 0) { crc = update_crc16(crc, (idlo)&0xff); @@ -349,12 +358,12 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc) // start by writing 0xBB (keyword) and 0xEB (password) // then write 80 bits of data (or 64 bit data + 16 bit crc if you prefer) // finally end with 0x0300 (write frame) - // all data is sent lsb firts + // all data is sent lsb first // finish with 15ms programming time // modulate antenna HIGH(GPIO_SSC_DOUT); - SpinDelay(50); // charge time + WaitMS(50); // charge time WriteTIbyte(0xbb); // keyword WriteTIbyte(0xeb); // password @@ -371,7 +380,7 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc) WriteTIbyte(0x00); // write frame lo WriteTIbyte(0x03); // write frame hi HIGH(GPIO_SSC_DOUT); - SpinDelay(50); // programming time + WaitMS(50); // programming time LED_A_OFF(); @@ -379,62 +388,81 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc) AcquireTiType(); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - DbpString("Now use 'lf ti read' to check"); + DbpString("Now use `lf ti read` to check"); + StopTicks(); } void SimulateTagLowFrequency(int period, int gap, int ledcontrol) { - int i; - uint8_t *tab = BigBuf_get_addr(); + int i = 0; + uint8_t *buf = BigBuf_get_addr(); - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT); + //FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD); + //FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_TOGGLE_MODE ); + + // set frequency, get values from 'lf config' command + sample_config *sc = getSamplingConfig(); + if ( (sc->divisor == 1) || (sc->divisor < 0) || (sc->divisor > 255) ) + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz + else if (sc->divisor == 0) + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz + else + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc->divisor); + + SetAdcMuxFor(GPIO_MUXSEL_LOPKD); + AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK; AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK; - #define SHORT_COIL() LOW(GPIO_SSC_DOUT) - #define OPEN_COIL() HIGH(GPIO_SSC_DOUT) - - i = 0; + // power on antenna + // OPEN_COIL(); + // SpinDelay(50); + for(;;) { - //wait until SSC_CLK goes HIGH + WDT_HIT(); + + if (ledcontrol) LED_D_ON(); + + // wait until SSC_CLK goes HIGH + // used as a simple detection of a reader field? while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) { - if(BUTTON_PRESS() || (usb_poll_validate_length() )) { - DbpString("Stopped"); - return; - } WDT_HIT(); + if ( usb_poll_validate_length() || BUTTON_PRESS() ) + goto OUT; } - if (ledcontrol) LED_D_ON(); - - if(tab[i]) + + if(buf[i]) OPEN_COIL(); else SHORT_COIL(); - - if (ledcontrol) LED_D_OFF(); - + //wait until SSC_CLK goes LOW while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) { - if(BUTTON_PRESS()) { - DbpString("Stopped"); - return; - } WDT_HIT(); + if ( usb_poll_validate_length() || BUTTON_PRESS() ) + goto OUT; } - + i++; if(i == period) { - i = 0; if (gap) { + WDT_HIT(); SHORT_COIL(); SpinDelayUs(gap); } } + + if (ledcontrol) LED_D_OFF(); } +OUT: + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + LED_D_OFF(); + DbpString("Simulation stopped"); + return; } #define DEBUG_FRAME_CONTENTS 1 @@ -525,7 +553,10 @@ static void fcAll(uint8_t fc, int *n, uint8_t clock, uint16_t *modCnt) // simulate a HID tag until the button is pressed void CmdHIDsimTAG(int hi, int lo, int ledcontrol) { - int n=0, i=0; + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + set_tracing(FALSE); + + int n = 0, i = 0; /* HID tag bitstream format The tag contains a 44bit unique code. This is sent out MSB first in sets of 4 bits @@ -536,7 +567,7 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol) nor 1 bits, they are special patterns (a = set of 12 fc8 and b = set of 10 fc10) */ - if (hi>0xFFF) { + if (hi > 0xFFF) { DbpString("Tags can only have 44 bits. - USE lf simfsk for larger tags"); return; } @@ -568,7 +599,8 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol) fc(8, &n); fc(10, &n); // high-low transition } } - + WDT_HIT(); + if (ledcontrol) LED_A_ON(); SimulateTagLowFrequency(n, 0, ledcontrol); if (ledcontrol) LED_A_OFF(); @@ -579,8 +611,14 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol) // arg1 contains fcHigh and fcLow, arg2 contains invert and clock void CmdFSKsimTAG(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream) { - int ledcontrol=1; - int n=0, i=0; + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + + // free eventually allocated BigBuf memory + BigBuf_free(); BigBuf_Clear_ext(false); + clear_trace(); + set_tracing(FALSE); + + int ledcontrol = 1, n = 0, i = 0; uint8_t fcHigh = arg1 >> 8; uint8_t fcLow = arg1 & 0xFF; uint16_t modCnt = 0; @@ -588,27 +626,19 @@ void CmdFSKsimTAG(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream) uint8_t invert = (arg2 >> 8) & 1; for (i=0; i> 8) & 0xFF; uint8_t encoding = arg1 & 0xFF; uint8_t separator = arg2 & 1; uint8_t invert = (arg2 >> 8) & 1; - if (encoding==2){ //biphase - uint8_t phase=0; + if (encoding == 2){ //biphase + uint8_t phase = 0; for (i=0; i> 8; uint8_t carrier = arg1 & 0xFF; uint8_t invert = arg2 & 0xFF; @@ -719,6 +769,9 @@ void CmdPSKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream) pskSimBit(carrier, &n, clk, &curPhase, TRUE); } } + + WDT_HIT(); + Dbprintf("Simulating with Carrier: %d, clk: %d, invert: %d, n: %d",carrier, clk, invert, n); if (ledcontrol) LED_A_ON(); @@ -736,6 +789,9 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); + //clear read buffer + BigBuf_Clear_keep_EM(); + while(!BUTTON_PRESS() && !usb_poll_validate_length()) { WDT_HIT(); @@ -755,7 +811,7 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF ); - }else { //standard HID tags 44/96 bits + } else { //standard HID tags 44/96 bits uint8_t bitlen = 0; uint32_t fc = 0; uint32_t cardnum = 0; @@ -809,13 +865,14 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) if (ledcontrol) LED_A_OFF(); *high = hi; *low = lo; - return; + break; } // reset } hi2 = hi = lo = idx = 0; WDT_HIT(); } + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); DbpString("Stopped"); if (ledcontrol) LED_A_OFF(); } @@ -826,6 +883,8 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) uint8_t *dest = BigBuf_get_addr(); size_t size; int idx=0; + //clear read buffer + BigBuf_Clear_keep_EM(); // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); @@ -839,7 +898,7 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) size = 50*128*2; //big enough to catch 2 sequences of largest format idx = AWIDdemodFSK(dest, &size); - if (idx>0 && size==96){ + if (idx<=0 || size!=96) continue; // Index map // 0 10 20 30 40 50 60 // | | | | | | | @@ -859,7 +918,7 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) uint32_t rawHi2 = bytebits_to_byte(dest+idx,32); size = removeParity(dest, idx+8, 4, 1, 88); - // ok valid card found! + if (size != 66) continue; // Index map // 0 10 20 30 40 50 60 @@ -869,41 +928,55 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) // 00011010 1 01110101 0000000010001110 1 000000000000000000000000000000000 // bbbbbbbb w ffffffff cccccccccccccccc w xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx // |26 bit| |-117--| |-----142------| + // + // 00110010 0 0000011111010000000000000001000100101000100001111 0 00000000 + // bbbbbbbb w ffffffffffffffffccccccccccccccccccccccccccccccccc w xxxxxxxx + // |50 bit| |----4000------||-----------2248975-------------| + // // b = format bit len, o = odd parity of last 3 bits // f = facility code, c = card number // w = wiegand parity - // (26 bit format shown) uint32_t fc = 0; uint32_t cardnum = 0; uint32_t code1 = 0; uint32_t code2 = 0; uint8_t fmtLen = bytebits_to_byte(dest,8); - if (fmtLen==26){ - fc = bytebits_to_byte(dest+9, 8); - cardnum = bytebits_to_byte(dest+17, 16); - code1 = bytebits_to_byte(dest+8,fmtLen); - Dbprintf("AWID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi2, rawHi, rawLo); - } else { - cardnum = bytebits_to_byte(dest+8+(fmtLen-17), 16); - if (fmtLen>32){ - code1 = bytebits_to_byte(dest+8,fmtLen-32); - code2 = bytebits_to_byte(dest+8+(fmtLen-32),32); - Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, code2, rawHi2, rawHi, rawLo); - } else{ - code1 = bytebits_to_byte(dest+8,fmtLen); - Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, rawHi2, rawHi, rawLo); - } - } - if (findone){ - if (ledcontrol) LED_A_OFF(); - return; + switch(fmtLen) { + case 26: + fc = bytebits_to_byte(dest + 9, 8); + cardnum = bytebits_to_byte(dest + 17, 16); + code1 = bytebits_to_byte(dest + 8,fmtLen); + Dbprintf("AWID Found - BitLength: %d, FC: %d, Card: %u - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi2, rawHi, rawLo); + break; + case 50: + fc = bytebits_to_byte(dest + 9, 16); + cardnum = bytebits_to_byte(dest + 25, 32); + code1 = bytebits_to_byte(dest + 8, (fmtLen-32) ); + code2 = bytebits_to_byte(dest + 8 + (fmtLen-32), 32); + Dbprintf("AWID Found - BitLength: %d, FC: %d, Card: %u - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, code2, rawHi2, rawHi, rawLo); + break; + default: + if (fmtLen > 32 ) { + cardnum = bytebits_to_byte(dest+8+(fmtLen-17), 16); + code1 = bytebits_to_byte(dest+8,fmtLen-32); + code2 = bytebits_to_byte(dest+8+(fmtLen-32),32); + Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%u) - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, code2, rawHi2, rawHi, rawLo); + } else { + cardnum = bytebits_to_byte(dest+8+(fmtLen-17), 16); + code1 = bytebits_to_byte(dest+8,fmtLen); + Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%u) - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, rawHi2, rawHi, rawLo); + } + break; } - // reset - } + if (findone) + break; + idx = 0; WDT_HIT(); } + + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); DbpString("Stopped"); if (ledcontrol) LED_A_OFF(); } @@ -916,6 +989,8 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol) int clk=0, invert=0, errCnt=0, maxErr=20; uint32_t hi=0; uint64_t lo=0; + //clear read buffer + BigBuf_Clear_keep_EM(); // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); @@ -956,13 +1031,14 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol) if (ledcontrol) LED_A_OFF(); *high=lo>>32; *low=lo & 0xFFFFFFFF; - return; + break; } } WDT_HIT(); hi = lo = size = idx = 0; clk = invert = errCnt = 0; } + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); DbpString("Stopped"); if (ledcontrol) LED_A_OFF(); } @@ -977,6 +1053,10 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) uint16_t number=0; uint8_t crc = 0; uint16_t calccrc = 0; + + //clear read buffer + BigBuf_Clear_keep_EM(); + // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); @@ -1008,15 +1088,15 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) // Checksum: 0x75 //XSF(version)facility:codeone+codetwo //Handle the data - if(findone){ //only print binary if we are doing one - Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx], dest[idx+1], dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7],dest[idx+8]); - Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15],dest[idx+16],dest[idx+17]); - Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23],dest[idx+24],dest[idx+25],dest[idx+26]); - Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31],dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35]); - Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39],dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44]); - Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+45],dest[idx+46],dest[idx+47],dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53]); - Dbprintf("%d%d%d%d%d%d%d%d %d%d",dest[idx+54],dest[idx+55],dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]); - } + // if(findone){ //only print binary if we are doing one + // Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx], dest[idx+1], dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7],dest[idx+8]); + // Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15],dest[idx+16],dest[idx+17]); + // Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23],dest[idx+24],dest[idx+25],dest[idx+26]); + // Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31],dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35]); + // Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39],dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44]); + // Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+45],dest[idx+46],dest[idx+47],dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53]); + // Dbprintf("%d%d%d%d%d%d%d%d %d%d",dest[idx+54],dest[idx+55],dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]); + // } code = bytebits_to_byte(dest+idx,32); code2 = bytebits_to_byte(dest+idx+32,32); version = bytebits_to_byte(dest+idx+27,8); //14,4 @@ -1037,7 +1117,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) if (ledcontrol) LED_A_OFF(); *high=code; *low=code2; - return; + break; } code=code2=0; version=facilitycode=0; @@ -1046,6 +1126,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) WDT_HIT(); } + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); DbpString("Stopped"); if (ledcontrol) LED_A_OFF(); } @@ -1061,10 +1142,10 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) * Q5 tags seems to have issues when these values changes. */ -#define START_GAP 50*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (or 15fc) -#define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (or 10fc) -#define WRITE_0 16*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc) -#define WRITE_1 50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) 432 for T55x7; 448 for E5550 +#define START_GAP 50*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (15fc) +#define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (10fc) +#define WRITE_0 18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (24fc) +#define WRITE_1 54*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (56fc) 432 for T55x7; 448 for E5550 #define READ_GAP 15*8 // VALUES TAKEN FROM EM4x function: SendForward @@ -1073,7 +1154,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) // WRITE_1 = 256 32*8; (32*8) // These timings work for 4469/4269/4305 (with the 55*8 above) -// WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8); +// WRITE_0 = 23*8 , 9*8 // Sam7s has several timers, we will use the source TIMER_CLOCK1 (aka AT91C_TC_CLKS_TIMER_DIV1_CLOCK) // TIMER_CLOCK1 = MCK/2, MCK is running at 48 MHz, Timer is running at 48/2 = 24 MHz @@ -1081,15 +1162,17 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) // T0 = TIMER_CLOCK1 / 125000 = 192 // 1 Cycle = 8 microseconds(us) == 1 field clock -void TurnReadLFOn(int delay) { +// new timer: +// = 1us = 1.5ticks +// 1fc = 8us = 12ticks +void TurnReadLFOn(uint32_t delay) { FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); - // Give it a bit of time for the resonant antenna to settle. // measure antenna strength. //int adcval = ((MAX_ADC_LF_VOLTAGE * AvgAdc(ADC_CHAN_LF)) >> 10); - // where to save it - - SpinDelayUs(delay); + + // Give it a bit of time for the resonant antenna to settle. + WaitUS(delay); } // Write one bit to card @@ -1099,21 +1182,21 @@ void T55xxWriteBit(int bit) { else TurnReadLFOn(WRITE_1); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelayUs(WRITE_GAP); + WaitUS(WRITE_GAP); } // Send T5577 reset command then read stream (see if we can identify the start of the stream) void T55xxResetRead(void) { LED_A_ON(); //clear buffer now so it does not interfere with timing later - BigBuf_Clear_ext(false); + BigBuf_Clear_keep_EM(); // Set up FPGA, 125kHz LFSetupFPGAForADC(95, true); // Trigger T55x7 in mode. FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelayUs(START_GAP); + WaitUS(START_GAP); // reset tag - op code 00 T55xxWriteBit(0); @@ -1143,7 +1226,7 @@ void T55xxWriteBlockExt(uint32_t Data, uint8_t Block, uint32_t Pwd, uint8_t arg) // Trigger T55x7 in mode. FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelayUs(START_GAP); + WaitUS(START_GAP); // Opcode 10 T55xxWriteBit(1); @@ -1167,10 +1250,11 @@ void T55xxWriteBlockExt(uint32_t Data, uint8_t Block, uint32_t Pwd, uint8_t arg) // Perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550, // so wait a little more) TurnReadLFOn(20 * 1000); - //could attempt to do a read to confirm write took - // as the tag should repeat back the new block - // until it is reset, but to confirm it we would - // need to know the current block 0 config mode + + //could attempt to do a read to confirm write took + // as the tag should repeat back the new block + // until it is reset, but to confirm it we would + // need to know the current block 0 config mode // turn field off FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); @@ -1192,17 +1276,18 @@ void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) { bool RegReadMode = (Block == 0xFF); //clear buffer now so it does not interfere with timing later - BigBuf_Clear_ext(false); + BigBuf_Clear_keep_EM(); //make sure block is at max 7 Block &= 0x7; // Set up FPGA, 125kHz to power up the tag LFSetupFPGAForADC(95, true); + SpinDelay(3); // Trigger T55x7 Direct Access Mode with start gap FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelayUs(START_GAP); + WaitUS(START_GAP); // Opcode 1[page] T55xxWriteBit(1); @@ -1218,8 +1303,8 @@ void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) { // Send Block number (if direct access mode) if (!RegReadMode) - for (i = 0x04; i != 0; i >>= 1) - T55xxWriteBit(Block & i); + for (i = 0x04; i != 0; i >>= 1) + T55xxWriteBit(Block & i); // Turn field on to read the response TurnReadLFOn(READ_GAP); @@ -1242,7 +1327,7 @@ void T55xxWakeUp(uint32_t Pwd){ // Trigger T55x7 Direct Access Mode FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelayUs(START_GAP); + WaitUS(START_GAP); // Opcode 10 T55xxWriteBit(1); @@ -1257,22 +1342,20 @@ void T55xxWakeUp(uint32_t Pwd){ } /*-------------- Cloning routines -----------*/ - void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) { // write last block first and config block last (if included) for (uint8_t i = numblocks+startblock; i > startblock; i--) - T55xxWriteBlockExt(blockdata[i-1],i-1,0,0); + T55xxWriteBlockExt(blockdata[i-1], i-1, 0, 0); } // Copy HID id to card and setup block 0 config void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) { uint32_t data[] = {0,0,0,0,0,0,0}; - //int data1=0, data2=0, data3=0, data4=0, data5=0, data6=0; //up to six blocks for long format uint8_t last_block = 0; if (longFMT){ // Ensure no more than 84 bits supplied - if (hi2>0xFFFFF) { + if (hi2 > 0xFFFFF) { DbpString("Tags can only have 84 bits."); return; } @@ -1288,7 +1371,7 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) { data[6] = manchesterEncode2Bytes(lo & 0xFFFF); } else { // Ensure no more than 44 bits supplied - if (hi>0xFFF) { + if (hi > 0xFFF) { DbpString("Tags can only have 44 bits."); return; } @@ -1318,15 +1401,14 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) { void CopyIOtoT55x7(uint32_t hi, uint32_t lo) { uint32_t data[] = {T55x7_BITRATE_RF_64 | T55x7_MODULATION_FSK2a | (2 << T55x7_MAXBLOCK_SHIFT), hi, lo}; //TODO add selection of chip for Q5 or T55x7 - // data[0] = (((64-2)/2)<>32, id & 0xFFFFFFFF}; + uint32_t data[] = {0, (uint32_t)(id>>32), (uint32_t)(id & 0xFFFFFFFF)}; - clock = (card & 0xFF00) >> 8; - clock = (clock == 0) ? 64 : clock; - Dbprintf("Clock rate: %d", clock); + clock = (card & 0xFF00) >> 8; + clock = (clock == 0) ? 64 : clock; + Dbprintf("Clock rate: %d", clock); if (card & 0xFF) { //t55x7 clock = GetT55xxClockBit(clock); if (clock == 0) { @@ -1438,20 +1530,22 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) { clock = (clock-2)>>1; //n = (RF-2)/2 data[0] = (clock << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | (2 << T5555_MAXBLOCK_SHIFT); } - + WriteT55xx(data, 0, 3); LED_D_OFF(); - Dbprintf("Tag %s written with 0x%08x%08x\n", card ? "T55x7":"T5555", - (uint32_t)(id >> 32), (uint32_t)id); + Dbprintf("Tag %s written with 0x%08x%08x\n", + card ? "T55x7":"T5555", + (uint32_t)(id >> 32), + (uint32_t)id); } //----------------------------------- // EM4469 / EM4305 routines //----------------------------------- -#define FWD_CMD_LOGIN 0xC //including the even parity, binary mirrored -#define FWD_CMD_WRITE 0xA -#define FWD_CMD_READ 0x9 +#define FWD_CMD_LOGIN 0xC //including the even parity, binary mirrored +#define FWD_CMD_WRITE 0xA +#define FWD_CMD_READ 0x9 #define FWD_CMD_DISABLE 0x5 uint8_t forwardLink_data[64]; //array of forwarded bits @@ -1470,7 +1564,7 @@ uint8_t * fwd_write_ptr; //forwardlink bit pointer // WRITE_1 = 256 32*8; (32*8) // These timings work for 4469/4269/4305 (with the 55*8 above) -// WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8); +// WRITE_0 = 23*8 , 9*8 uint8_t Prepare_Cmd( uint8_t cmd ) { @@ -1564,20 +1658,20 @@ void SendForward(uint8_t fwd_bit_count) { fwd_bit_sz--; //prepare next bit modulation fwd_write_ptr++; FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off - SpinDelayUs(55*8); //55 cycles off (8us each)for 4305 + WaitUS(55*8); //55 cycles off (8us each)for 4305 // ICEMAN: problem with (us) clock is 21.3us increments FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on - SpinDelayUs(16*8); //16 cycles on (8us each) + WaitUS(16*8); //16 cycles on (8us each) // ICEMAN: problem with (us) clock is 21.3us increments // now start writting while(fwd_bit_sz-- > 0) { //prepare next bit modulation if(((*fwd_write_ptr++) & 1) == 1) - SpinDelayUs(32*8); //32 cycles at 125Khz (8us each) + WaitUS(32*8); //32 cycles at 125Khz (8us each) // ICEMAN: problem with (us) clock is 21.3us increments else { //These timings work for 4469/4269/4305 (with the 55*8 above) FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off - SpinDelayUs(23*8); //16-4 cycles off (8us each) + WaitUS(16*8); //16-4 cycles off (8us each) // ICEMAN: problem with (us) clock is 21.3us increments FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on - SpinDelayUs(9*8); //16 cycles on (8us each) + WaitUS(16*8); //16 cycles on (8us each) // ICEMAN: problem with (us) clock is 21.3us increments } } } @@ -1585,25 +1679,23 @@ void SendForward(uint8_t fwd_bit_count) { void EM4xLogin(uint32_t Password) { uint8_t fwd_bit_count; - forward_ptr = forwardLink_data; fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN ); fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 ); - SendForward(fwd_bit_count); //Wait for command to complete - SpinDelay(20); + WaitMS(20); } void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { uint8_t fwd_bit_count; uint8_t *dest = BigBuf_get_addr(); - uint16_t bufsize = BigBuf_max_traceLen(); + uint16_t bufsize = BigBuf_max_traceLen(); // ICEMAN: this tries to fill up all tracelog space uint32_t i = 0; - //clear buffer now so it does not interfere with timing later + // Clear destination buffer before sending the command BigBuf_Clear_ext(false); //If password mode do login @@ -1613,14 +1705,10 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { fwd_bit_count = Prepare_Cmd( FWD_CMD_READ ); fwd_bit_count += Prepare_Addr( Address ); - // Connect the A/D to the peak-detected low-frequency path. - SetAdcMuxFor(GPIO_MUXSEL_LOPKD); - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); - SendForward(fwd_bit_count); // Now do the acquisition + // ICEMAN, change to the one in lfsampling.c i = 0; for(;;) { if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) { @@ -1653,16 +1741,7 @@ void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode SendForward(fwd_bit_count); //Wait for write to complete - SpinDelay(20); + WaitMS(20); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off LED_D_OFF(); } - -void CopyViKingtoT55x7(uint32_t block1, uint32_t block2) { - - uint32_t data[] = {T55x7_BITRATE_RF_32 | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT), block1, block2}; - // Program the data blocks for supplied ID and the block 0 config - WriteT55xx(data, 0, 3); - LED_D_OFF(); -} -