X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/6799b193741ead38211998950b10fb03fbf69d90..3c345a41b2c4c9c3614c9cbb1e81ee5b9cf5d8bb:/armsrc/hitag2.c diff --git a/armsrc/hitag2.c b/armsrc/hitag2.c index d1005f3c..0fab407f 100644 --- a/armsrc/hitag2.c +++ b/armsrc/hitag2.c @@ -414,7 +414,7 @@ static void hitag_reader_send_bit(int bit) { // Binary puls length modulation (BPLM) is used to encode the data stream // This means that a transmission of a one takes longer than that of a zero - // Enable modulation, which means, drop the the field + // Enable modulation, which means, drop the field HIGH(GPIO_SSC_DOUT); // Wait for 4-10 times the carrier period @@ -444,7 +444,7 @@ static void hitag_reader_send_frame(const byte_t* frame, size_t frame_len) } // Send EOF AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG; - // Enable modulation, which means, drop the the field + // Enable modulation, which means, drop the field HIGH(GPIO_SSC_DOUT); // Wait for 4-10 times the carrier period while(AT91C_BASE_TC0->TC_CV < T0*6); @@ -698,6 +698,42 @@ static bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx return true; } +static bool hitag2_read_uid(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { + // Reset the transmission frame length + *txlen = 0; + + // Try to find out which command was send by selecting on length (in bits) + switch (rxlen) { + // No answer, try to resurrect + case 0: { + // Just starting or if there is no answer + *txlen = 5; + memcpy(tx,"\xc0",nbytes(*txlen)); + } break; + // Received UID + case 32: { + // Check if we received answer tag (at) + if (bAuthenticating) { + bAuthenticating = false; + } else { + // Store the received block + memcpy(tag.sectors[blocknr],rx,4); + blocknr++; + } + if (blocknr > 0) { + //DbpString("Read successful!"); + bSuccessful = true; + return false; + } + } break; + // Unexpected response + default: { + Dbprintf("Uknown frame length: %d",rxlen); + return false; + } break; + } + return true; +} void SnoopHitag(uint32_t type) { int frame_count; @@ -712,15 +748,17 @@ void SnoopHitag(uint32_t type) { size_t rxlen=0; FpgaDownloadAndGo(FPGA_BITSTREAM_LF); - + + // free eventually allocated BigBuf memory + BigBuf_free(); BigBuf_Clear_ext(false); + // Clean up trace and prepare it for storing frames - set_tracing(TRUE); clear_trace(); + set_tracing(TRUE); auth_table_len = 0; auth_table_pos = 0; - BigBuf_free(); auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH); memset(auth_table, 0x00, AUTH_TABLE_LENGTH); @@ -927,14 +965,17 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) { FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + // free eventually allocated BigBuf memory + BigBuf_free(); BigBuf_Clear_ext(false); + // Clean up trace and prepare it for storing frames - set_tracing(TRUE); clear_trace(); - + set_tracing(TRUE); + auth_table_len = 0; auth_table_pos = 0; byte_t* auth_table; - BigBuf_free(); + auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH); memset(auth_table, 0x00, AUTH_TABLE_LENGTH); @@ -1121,10 +1162,10 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { bSuccessful = false; // Clean up trace and prepare it for storing frames - set_tracing(TRUE); clear_trace(); - - DbpString("Starting Hitag reader family"); + set_tracing(TRUE); + + //DbpString("Starting Hitag reader family"); // Check configuration switch(htf) { @@ -1149,7 +1190,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { case RHT2F_CRYPTO: { DbpString("Authenticating using key:"); - memcpy(key,htd->crypto.key,4); //HACK; 4 or 6?? I read both in the code. + memcpy(key,htd->crypto.key,6); //HACK; 4 or 6?? I read both in the code. Dbhexdump(6,key,false); blocknr = 0; bQuiet = false; @@ -1166,7 +1207,13 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { bQuiet = false; bCrypto = false; } break; - + case RHT2F_UID_ONLY: { + blocknr = 0; + bQuiet = false; + bCrypto = false; + bAuthenticating = false; + bQuitTraceFull = true; + } break; default: { Dbprintf("Error, unknown function: %d",htf); set_tracing(FALSE); @@ -1224,23 +1271,23 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { // hitagS settings reset_sof = 1; t_wait = 200; - DbpString("Configured for hitagS reader"); + //DbpString("Configured for hitagS reader"); } else if (htf < 20) { // hitag1 settings reset_sof = 1; t_wait = 200; - DbpString("Configured for hitag1 reader"); + //DbpString("Configured for hitag1 reader"); } else if (htf < 30) { // hitag2 settings reset_sof = 4; t_wait = HITAG_T_WAIT_2; - DbpString("Configured for hitag2 reader"); + //DbpString("Configured for hitag2 reader"); } else { Dbprintf("Error, unknown hitag reader type: %d",htf); set_tracing(FALSE); return; } - + uint8_t attempt_count=0; while(!bStop && !BUTTON_PRESS()) { // Watchdog hit WDT_HIT(); @@ -1275,6 +1322,11 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { case RHT2F_TEST_AUTH_ATTEMPTS: { bStop = !hitag2_test_auth_attempts(rx,rxlen,tx,&txlen); } break; + case RHT2F_UID_ONLY: { + bStop = !hitag2_read_uid(rx, rxlen, tx, &txlen); + attempt_count++; //attempt 3 times to get uid then quit + if (!bStop && attempt_count == 3) bStop = true; + } break; default: { Dbprintf("Error, unknown function: %d",htf); set_tracing(FALSE); @@ -1321,6 +1373,8 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { bSkip = true; tag_sof = reset_sof; response = 0; + //Dbprintf("DEBUG: Waiting to receive frame"); + uint32_t errorCount = 0; // Receive frame, watch for at most T0*EOF periods while (AT91C_BASE_TC1->TC_CV < T0*HITAG_T_WAIT_MAX) { @@ -1370,10 +1424,13 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { rxlen++; } } else { + //Dbprintf("DEBUG: Wierd2"); + errorCount++; // Ignore wierd value, is to small to mean anything } } - + //if we saw over 100 wierd values break it probably isn't hitag... + if (errorCount >100) break; // We can break this loop if we received the last bit from a frame if (AT91C_BASE_TC1->TC_CV > T0*HITAG_T_EOF) { if (rxlen>0) break; @@ -1385,7 +1442,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - Dbprintf("DONE: frame received: %d",frame_count); +// Dbprintf("DONE: frame received: %d",frame_count); cmd_send(CMD_ACK,bSuccessful,0,0,(byte_t*)tag.sectors,48); set_tracing(FALSE); } \ No newline at end of file