X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/6bfa18eab4750123d0e24090597b0d4c7bd58daf..0b4efbdef20ccf33ba7b5f6dbe36ab80cfe5477a:/client/lualibs/commands.lua?ds=inline diff --git a/client/lualibs/commands.lua b/client/lualibs/commands.lua index aeba31a7..dadd2fc5 100644 --- a/client/lualibs/commands.lua +++ b/client/lualibs/commands.lua @@ -1,129 +1,14 @@ --[[ -These are command definitions. This file should correspond exactly to usb_cmd.h. +Handle Proxmark USB Commands --]] ---// For the bootloader -local _commands = { - CMD_DEVICE_INFO = 0x0000, - CMD_SETUP_WRITE = 0x0001, - CMD_FINISH_WRITE = 0x0003, - CMD_HARDWARE_RESET = 0x0004, - CMD_START_FLASH = 0x0005, - CMD_NACK = 0x00fe, - CMD_ACK = 0x00ff, - - --// For general mucking around - CMD_DEBUG_PRINT_STRING = 0x0100, - CMD_DEBUG_PRINT_INTEGERS = 0x0101, - CMD_DEBUG_PRINT_BYTES = 0x0102, - CMD_LCD_RESET = 0x0103, - CMD_LCD = 0x0104, - CMD_BUFF_CLEAR = 0x0105, - CMD_READ_MEM = 0x0106, - CMD_VERSION = 0x0107, - - --// For low-frequency tags - CMD_READ_TI_TYPE = 0x0202, - CMD_WRITE_TI_TYPE = 0x0203, - CMD_DOWNLOADED_RAW_BITS_TI_TYPE = 0x0204, - CMD_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0205, - CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0206, - CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K = 0x0207, - CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K = 0x0208, - CMD_DOWNLOADED_SIM_SAMPLES_125K = 0x0209, - CMD_SIMULATE_TAG_125K = 0x020A, - CMD_HID_DEMOD_FSK = 0x020B, - CMD_HID_SIM_TAG = 0x020C, - CMD_SET_LF_DIVISOR = 0x020D, - CMD_LF_SIMULATE_BIDIR = 0x020E, - CMD_SET_ADC_MUX = 0x020F, - CMD_HID_CLONE_TAG = 0x0210, - CMD_EM410X_WRITE_TAG = 0x0211, - CMD_INDALA_CLONE_TAG = 0x0212, - --// for 224 bits UID - CMD_INDALA_CLONE_TAG_L = 0x0213, - CMD_T55XX_READ_BLOCK = 0x0214, - CMD_T55XX_WRITE_BLOCK = 0x0215, - CMD_T55XX_READ_TRACE = 0x0216, - CMD_PCF7931_READ = 0x0217, - CMD_EM4X_READ_WORD = 0x0218, - CMD_EM4X_WRITE_WORD = 0x0219, - CMD_IO_DEMOD_FSK = 0x021A, - CMD_IO_CLONE_TAG = 0x021B, - CMD_EM410X_DEMOD = 0x021C, - --/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */ - - --// For the 13.56 MHz tags - CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 = 0x0300, - CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 = 0x0301, - CMD_READ_SRI512_TAG = 0x0303, - CMD_READ_SRIX4K_TAG = 0x0304, - CMD_READER_ISO_15693 = 0x0310, - CMD_SIMTAG_ISO_15693 = 0x0311, - CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 = 0x0312, - CMD_ISO_15693_COMMAND = 0x0313, - CMD_ISO_15693_COMMAND_DONE = 0x0314, - CMD_ISO_15693_FIND_AFI = 0x0315, - CMD_ISO_15693_DEBUG = 0x0316, - - --// For Hitag2 transponders - CMD_SNOOP_HITAG = 0x0370, - CMD_SIMULATE_HITAG = 0x0371, - CMD_READER_HITAG = 0x0372, - - CMD_SIMULATE_TAG_HF_LISTEN = 0x0380, - CMD_SIMULATE_TAG_ISO_14443 = 0x0381, - CMD_SNOOP_ISO_14443 = 0x0382, - CMD_SNOOP_ISO_14443a = 0x0383, - CMD_SIMULATE_TAG_ISO_14443a = 0x0384, - CMD_READER_ISO_14443a = 0x0385, - CMD_SIMULATE_TAG_LEGIC_RF = 0x0387, - CMD_READER_LEGIC_RF = 0x0388, - CMD_WRITER_LEGIC_RF = 0x0389, - CMD_EPA_PACE_COLLECT_NONCE = 0x038A, - - CMD_SNOOP_ICLASS = 0x0392, - CMD_SIMULATE_TAG_ICLASS = 0x0393, - CMD_READER_ICLASS = 0x0394, - - --// For measurements of the antenna tuning - CMD_MEASURE_ANTENNA_TUNING = 0x0400, - CMD_MEASURE_ANTENNA_TUNING_HF = 0x0401, - CMD_MEASURED_ANTENNA_TUNING = 0x0410, - CMD_LISTEN_READER_FIELD = 0x0420, - - --// For direct FPGA control - CMD_FPGA_MAJOR_MODE_OFF = 0x0500, - - --// For mifare commands - CMD_MIFARE_SET_DBGMODE = 0x0600, - CMD_MIFARE_EML_MEMCLR = 0x0601, - CMD_MIFARE_EML_MEMSET = 0x0602, - CMD_MIFARE_EML_MEMGET = 0x0603, - CMD_MIFARE_EML_CARDLOAD = 0x0604, - CMD_MIFARE_EML_CSETBLOCK = 0x0605, - CMD_MIFARE_EML_CGETBLOCK = 0x0606, - - CMD_SIMULATE_MIFARE_CARD = 0x0610, - - CMD_READER_MIFARE = 0x0611, - CMD_MIFARE_NESTED = 0x0612, - - CMD_MIFARE_READBL = 0x0620, - CMD_MIFARE_READSC = 0x0621, - CMD_MIFARE_WRITEBL = 0x0622, - CMD_MIFARE_CHKKEYS = 0x0623, - - CMD_MIFARE_SNIFFER = 0x0630, - - CMD_UNKNOWN = 0xFFFF, -} +local _commands = require('usb_cmd') local _reverse_lookup,k,v = {} -for k, v in pairs(_commands) do - _reverse_lookup[v] = k -end -_commands.tostring = function(command) + for k, v in pairs(_commands) do + _reverse_lookup[v] = k + end + _commands.tostring = function(command) if(type(command) == 'number') then return ("%s (%d)"):format(_reverse_lookup[command]or "ERROR UNDEFINED!", command) end @@ -184,8 +69,6 @@ function Command:getBytes() local data = self.data local cmd = self.cmd local arg1, arg2, arg3 = self.arg1, self.arg2, self.arg3 - - - return bin.pack("LLLLH",cmd, arg1, arg2, arg3,data); + return bin.pack("LLLLH",cmd, arg1, arg2, arg3, data); end -return _commands \ No newline at end of file +return _commands