X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/6ca4c6463e401a9c7bb080010a526b9270dbfda7..04d2721b3c7c4113e627d3f953835bde932065db:/armsrc/lfops.c?ds=inline

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index d5b64593..8ea9b317 100644
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -18,144 +18,144 @@
 
 
 /**
-* Does the sample acquisition. If threshold is specified, the actual sampling 
-* is not commenced until the threshold has been reached. 
+* Does the sample acquisition. If threshold is specified, the actual sampling
+* is not commenced until the threshold has been reached.
 * @param trigger_threshold - the threshold
 * @param silent - is true, now outputs are made. If false, dbprints the status
 */
 void DoAcquisition125k_internal(int trigger_threshold,bool silent)
 {
-	uint8_t *dest = (uint8_t *)BigBuf;
-	int n = sizeof(BigBuf);
-	int i;
-
-	memset(dest, 0, n);
-	i = 0;
-	for(;;) {
-		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
-			AT91C_BASE_SSC->SSC_THR = 0x43;
-			LED_D_ON();
-		}
-		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
-			dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-			LED_D_OFF();
-			if (trigger_threshold != -1 && dest[i] < trigger_threshold)
-				continue;
-			else
-				trigger_threshold = -1;
-			if (++i >= n) break;
-		}
-	}
-	if(!silent)
-	{
-		Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...",
-				dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]);
-		
-	}
+    uint8_t *dest = (uint8_t *)BigBuf;
+    int n = sizeof(BigBuf);
+    int i;
+
+    memset(dest, 0, n);
+    i = 0;
+    for(;;) {
+        if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
+            AT91C_BASE_SSC->SSC_THR = 0x43;
+            LED_D_ON();
+        }
+        if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
+            dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
+            LED_D_OFF();
+            if (trigger_threshold != -1 && dest[i] < trigger_threshold)
+                continue;
+            else
+                trigger_threshold = -1;
+            if (++i >= n) break;
+        }
+    }
+    if(!silent)
+    {
+        Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...",
+                 dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]);
+
+    }
 }
 /**
-* Perform sample aquisition. 
+* Perform sample aquisition.
 */
 void DoAcquisition125k(int trigger_threshold)
 {
-	DoAcquisition125k_internal(trigger_threshold, false);
+    DoAcquisition125k_internal(trigger_threshold, false);
 }
 
 /**
-* Setup the FPGA to listen for samples. This method downloads the FPGA bitstream 
-* if not already loaded, sets divisor and starts up the antenna. 
+* Setup the FPGA to listen for samples. This method downloads the FPGA bitstream
+* if not already loaded, sets divisor and starts up the antenna.
 * @param divisor : 1, 88> 255 or negative ==> 134.8 KHz
 * 				   0 or 95 ==> 125 KHz
-* 				   
+*
 **/
 void LFSetupFPGAForADC(int divisor, bool lf_field)
 {
-	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-	if ( (divisor == 1) || (divisor < 0) || (divisor > 255) )
-		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-	else if (divisor == 0)
-		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	else
-		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor);
-
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | (lf_field ? FPGA_LF_ADC_READER_FIELD : 0));
-
-	// Connect the A/D to the peak-detected low-frequency path.
-	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-	// Give it a bit of time for the resonant antenna to settle.
-	SpinDelay(50);
-	// Now set up the SSC to get the ADC samples that are now streaming at us.
-	FpgaSetupSsc();
+    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+    if ( (divisor == 1) || (divisor < 0) || (divisor > 255) )
+        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
+    else if (divisor == 0)
+        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+    else
+        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor);
+
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | (lf_field ? FPGA_LF_ADC_READER_FIELD : 0));
+
+    // Connect the A/D to the peak-detected low-frequency path.
+    SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
+    // Give it a bit of time for the resonant antenna to settle.
+    SpinDelay(50);
+    // Now set up the SSC to get the ADC samples that are now streaming at us.
+    FpgaSetupSsc();
 }
 /**
-* Initializes the FPGA, and acquires the samples. 
+* Initializes the FPGA, and acquires the samples.
 **/
 void AcquireRawAdcSamples125k(int divisor)
 {
-	LFSetupFPGAForADC(divisor, true);
-	// Now call the acquisition routine
-	DoAcquisition125k_internal(-1,false);
+    LFSetupFPGAForADC(divisor, true);
+    // Now call the acquisition routine
+    DoAcquisition125k_internal(-1,false);
 }
 /**
-* Initializes the FPGA for snoop-mode, and acquires the samples. 
+* Initializes the FPGA for snoop-mode, and acquires the samples.
 **/
 
 void SnoopLFRawAdcSamples(int divisor, int trigger_threshold)
 {
-	LFSetupFPGAForADC(divisor, false);
-	DoAcquisition125k(trigger_threshold);
+    LFSetupFPGAForADC(divisor, false);
+    DoAcquisition125k(trigger_threshold);
 }
 
 void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command)
 {
 
-	/* Make sure the tag is reset */
-	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	SpinDelay(2500);
+    /* Make sure the tag is reset */
+    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+    SpinDelay(2500);
 
 
-	int divisor_used = 95; // 125 KHz
-	// see if 'h' was specified
+    int divisor_used = 95; // 125 KHz
+    // see if 'h' was specified
 
-	if (command[strlen((char *) command) - 1] == 'h')
-		divisor_used = 88; // 134.8 KHz
+    if (command[strlen((char *) command) - 1] == 'h')
+        divisor_used = 88; // 134.8 KHz
 
 
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); 
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-	// Give it a bit of time for the resonant antenna to settle.
-	SpinDelay(50);
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+    // Give it a bit of time for the resonant antenna to settle.
+    SpinDelay(50);
 
-	// And a little more time for the tag to fully power up
-	SpinDelay(2000);
+    // And a little more time for the tag to fully power up
+    SpinDelay(2000);
 
-	// Now set up the SSC to get the ADC samples that are now streaming at us.
-	FpgaSetupSsc();
+    // Now set up the SSC to get the ADC samples that are now streaming at us.
+    FpgaSetupSsc();
 
-	// now modulate the reader field
-	while(*command != '\0' && *command != ' ') {
-		FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-		LED_D_OFF();
-		SpinDelayUs(delay_off);
-		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); 
+    // now modulate the reader field
+    while(*command != '\0' && *command != ' ') {
+        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+        LED_D_OFF();
+        SpinDelayUs(delay_off);
+        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
 
-		FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-		LED_D_ON();
-		if(*(command++) == '0')
-			SpinDelayUs(period_0);
-		else
-			SpinDelayUs(period_1);
-	}
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	LED_D_OFF();
-	SpinDelayUs(delay_off);
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); 
+        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+        LED_D_ON();
+        if(*(command++) == '0')
+            SpinDelayUs(period_0);
+        else
+            SpinDelayUs(period_1);
+    }
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+    LED_D_OFF();
+    SpinDelayUs(delay_off);
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
 
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
-	// now do the read
-	DoAcquisition125k(-1);
+    // now do the read
+    DoAcquisition125k(-1);
 }
 
 /* blank r/w tag data stream
@@ -169,230 +169,227 @@ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1,
 */
 void ReadTItag(void)
 {
-	// some hardcoded initial params
-	// when we read a TI tag we sample the zerocross line at 2Mhz
-	// TI tags modulate a 1 as 16 cycles of 123.2Khz
-	// TI tags modulate a 0 as 16 cycles of 134.2Khz
-	#define FSAMPLE 2000000
-	#define FREQLO 123200
-	#define FREQHI 134200
-
-	signed char *dest = (signed char *)BigBuf;
-	int n = sizeof(BigBuf);
-//	int *dest = GraphBuffer;
-//	int n = GraphTraceLen;
-
-	// 128 bit shift register [shift3:shift2:shift1:shift0]
-	uint32_t shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0;
-
-	int i, cycles=0, samples=0;
-	// how many sample points fit in 16 cycles of each frequency
-	uint32_t sampleslo = (FSAMPLE<<4)/FREQLO, sampleshi = (FSAMPLE<<4)/FREQHI;
-	// when to tell if we're close enough to one freq or another
-	uint32_t threshold = (sampleslo - sampleshi + 1)>>1;
-
-	// TI tags charge at 134.2Khz
-	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-
-	// Place FPGA in passthrough mode, in this mode the CROSS_LO line
-	// connects to SSP_DIN and the SSP_DOUT logic level controls
-	// whether we're modulating the antenna (high)
-	// or listening to the antenna (low)
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
-
-	// get TI tag data into the buffer
-	AcquireTiType();
-
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-
-	for (i=0; i<n-1; i++) {
-		// count cycles by looking for lo to hi zero crossings
-		if ( (dest[i]<0) && (dest[i+1]>0) ) {
-			cycles++;
-			// after 16 cycles, measure the frequency
-			if (cycles>15) {
-				cycles=0;
-				samples=i-samples; // number of samples in these 16 cycles
-
-				// TI bits are coming to us lsb first so shift them
-				// right through our 128 bit right shift register
-			  shift0 = (shift0>>1) | (shift1 << 31);
-			  shift1 = (shift1>>1) | (shift2 << 31);
-			  shift2 = (shift2>>1) | (shift3 << 31);
-			  shift3 >>= 1;
-
-				// check if the cycles fall close to the number
-				// expected for either the low or high frequency
-				if ( (samples>(sampleslo-threshold)) && (samples<(sampleslo+threshold)) ) {
-					// low frequency represents a 1
-					shift3 |= (1<<31);
-				} else if ( (samples>(sampleshi-threshold)) && (samples<(sampleshi+threshold)) ) {
-					// high frequency represents a 0
-				} else {
-					// probably detected a gay waveform or noise
-					// use this as gaydar or discard shift register and start again
-					shift3 = shift2 = shift1 = shift0 = 0;
-				}
-				samples = i;
-
-				// for each bit we receive, test if we've detected a valid tag
-
-				// if we see 17 zeroes followed by 6 ones, we might have a tag
-				// remember the bits are backwards
-				if ( ((shift0 & 0x7fffff) == 0x7e0000) ) {
-					// if start and end bytes match, we have a tag so break out of the loop
-					if ( ((shift0>>16)&0xff) == ((shift3>>8)&0xff) ) {
-						cycles = 0xF0B; //use this as a flag (ugly but whatever)
-						break;
-					}
-				}
-			}
-		}
-	}
-
-	// if flag is set we have a tag
-	if (cycles!=0xF0B) {
-		DbpString("Info: No valid tag detected.");
-	} else {
-	  // put 64 bit data into shift1 and shift0
-	  shift0 = (shift0>>24) | (shift1 << 8);
-	  shift1 = (shift1>>24) | (shift2 << 8);
-
-		// align 16 bit crc into lower half of shift2
-	  shift2 = ((shift2>>24) | (shift3 << 8)) & 0x0ffff;
-
-		// if r/w tag, check ident match
-		if ( shift3&(1<<15) ) {
-			DbpString("Info: TI tag is rewriteable");
-			// only 15 bits compare, last bit of ident is not valid
-			if ( ((shift3>>16)^shift0)&0x7fff ) {
-				DbpString("Error: Ident mismatch!");
-			} else {
-				DbpString("Info: TI tag ident is valid");
-			}
-		} else {
-			DbpString("Info: TI tag is readonly");
-		}
-
-		// WARNING the order of the bytes in which we calc crc below needs checking
-		// i'm 99% sure the crc algorithm is correct, but it may need to eat the
-		// bytes in reverse or something
-		// calculate CRC
-		uint32_t crc=0;
-
-	 	crc = update_crc16(crc, (shift0)&0xff);
-		crc = update_crc16(crc, (shift0>>8)&0xff);
-		crc = update_crc16(crc, (shift0>>16)&0xff);
-		crc = update_crc16(crc, (shift0>>24)&0xff);
-		crc = update_crc16(crc, (shift1)&0xff);
-		crc = update_crc16(crc, (shift1>>8)&0xff);
-		crc = update_crc16(crc, (shift1>>16)&0xff);
-		crc = update_crc16(crc, (shift1>>24)&0xff);
-
-		Dbprintf("Info: Tag data: %x%08x, crc=%x",
-			(unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF);
-		if (crc != (shift2&0xffff)) {
-			Dbprintf("Error: CRC mismatch, expected %x", (unsigned int)crc);
-		} else {
-			DbpString("Info: CRC is good");
-		}
-	}
+    // some hardcoded initial params
+    // when we read a TI tag we sample the zerocross line at 2Mhz
+    // TI tags modulate a 1 as 16 cycles of 123.2Khz
+    // TI tags modulate a 0 as 16 cycles of 134.2Khz
+ #define FSAMPLE 2000000
+ #define FREQLO 123200
+ #define FREQHI 134200
+
+    signed char *dest = (signed char *)BigBuf;
+    int n = sizeof(BigBuf);
+    // 128 bit shift register [shift3:shift2:shift1:shift0]
+    uint32_t shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0;
+
+    int i, cycles=0, samples=0;
+    // how many sample points fit in 16 cycles of each frequency
+    uint32_t sampleslo = (FSAMPLE<<4)/FREQLO, sampleshi = (FSAMPLE<<4)/FREQHI;
+    // when to tell if we're close enough to one freq or another
+    uint32_t threshold = (sampleslo - sampleshi + 1)>>1;
+
+    // TI tags charge at 134.2Khz
+    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
+
+    // Place FPGA in passthrough mode, in this mode the CROSS_LO line
+    // connects to SSP_DIN and the SSP_DOUT logic level controls
+    // whether we're modulating the antenna (high)
+    // or listening to the antenna (low)
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
+
+    // get TI tag data into the buffer
+    AcquireTiType();
+
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+
+    for (i=0; i<n-1; i++) {
+        // count cycles by looking for lo to hi zero crossings
+        if ( (dest[i]<0) && (dest[i+1]>0) ) {
+            cycles++;
+            // after 16 cycles, measure the frequency
+            if (cycles>15) {
+                cycles=0;
+                samples=i-samples; // number of samples in these 16 cycles
+
+                // TI bits are coming to us lsb first so shift them
+                // right through our 128 bit right shift register
+                shift0 = (shift0>>1) | (shift1 << 31);
+                shift1 = (shift1>>1) | (shift2 << 31);
+                shift2 = (shift2>>1) | (shift3 << 31);
+                shift3 >>= 1;
+
+                // check if the cycles fall close to the number
+                // expected for either the low or high frequency
+                if ( (samples>(sampleslo-threshold)) && (samples<(sampleslo+threshold)) ) {
+                    // low frequency represents a 1
+                    shift3 |= (1<<31);
+                } else if ( (samples>(sampleshi-threshold)) && (samples<(sampleshi+threshold)) ) {
+                    // high frequency represents a 0
+                } else {
+                    // probably detected a gay waveform or noise
+                    // use this as gaydar or discard shift register and start again
+                    shift3 = shift2 = shift1 = shift0 = 0;
+                }
+                samples = i;
+
+                // for each bit we receive, test if we've detected a valid tag
+
+                // if we see 17 zeroes followed by 6 ones, we might have a tag
+                // remember the bits are backwards
+                if ( ((shift0 & 0x7fffff) == 0x7e0000) ) {
+                    // if start and end bytes match, we have a tag so break out of the loop
+                    if ( ((shift0>>16)&0xff) == ((shift3>>8)&0xff) ) {
+                        cycles = 0xF0B; //use this as a flag (ugly but whatever)
+                        break;
+                    }
+                }
+            }
+        }
+    }
+
+    // if flag is set we have a tag
+    if (cycles!=0xF0B) {
+        DbpString("Info: No valid tag detected.");
+    } else {
+        // put 64 bit data into shift1 and shift0
+        shift0 = (shift0>>24) | (shift1 << 8);
+        shift1 = (shift1>>24) | (shift2 << 8);
+
+        // align 16 bit crc into lower half of shift2
+        shift2 = ((shift2>>24) | (shift3 << 8)) & 0x0ffff;
+
+        // if r/w tag, check ident match
+		if (shift3 & (1<<15) ) {
+            DbpString("Info: TI tag is rewriteable");
+            // only 15 bits compare, last bit of ident is not valid
+			if (((shift3 >> 16) ^ shift0) & 0x7fff ) {
+                DbpString("Error: Ident mismatch!");
+            } else {
+                DbpString("Info: TI tag ident is valid");
+            }
+        } else {
+            DbpString("Info: TI tag is readonly");
+        }
+
+        // WARNING the order of the bytes in which we calc crc below needs checking
+        // i'm 99% sure the crc algorithm is correct, but it may need to eat the
+        // bytes in reverse or something
+        // calculate CRC
+        uint32_t crc=0;
+
+        crc = update_crc16(crc, (shift0)&0xff);
+        crc = update_crc16(crc, (shift0>>8)&0xff);
+        crc = update_crc16(crc, (shift0>>16)&0xff);
+        crc = update_crc16(crc, (shift0>>24)&0xff);
+        crc = update_crc16(crc, (shift1)&0xff);
+        crc = update_crc16(crc, (shift1>>8)&0xff);
+        crc = update_crc16(crc, (shift1>>16)&0xff);
+        crc = update_crc16(crc, (shift1>>24)&0xff);
+
+        Dbprintf("Info: Tag data: %x%08x, crc=%x",
+                 (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF);
+        if (crc != (shift2&0xffff)) {
+            Dbprintf("Error: CRC mismatch, expected %x", (unsigned int)crc);
+        } else {
+            DbpString("Info: CRC is good");
+        }
+    }
 }
 
 void WriteTIbyte(uint8_t b)
 {
-	int i = 0;
-
-	// modulate 8 bits out to the antenna
-	for (i=0; i<8; i++)
-	{
-		if (b&(1<<i)) {
-			// stop modulating antenna
-			LOW(GPIO_SSC_DOUT);
-			SpinDelayUs(1000);
-			// modulate antenna
-			HIGH(GPIO_SSC_DOUT);
-			SpinDelayUs(1000);
-		} else {
-			// stop modulating antenna
-			LOW(GPIO_SSC_DOUT);
-			SpinDelayUs(300);
-			// modulate antenna
-			HIGH(GPIO_SSC_DOUT);
-			SpinDelayUs(1700);
-		}
-	}
+    int i = 0;
+
+    // modulate 8 bits out to the antenna
+    for (i=0; i<8; i++)
+    {
+        if (b&(1<<i)) {
+            // stop modulating antenna
+            LOW(GPIO_SSC_DOUT);
+            SpinDelayUs(1000);
+            // modulate antenna
+            HIGH(GPIO_SSC_DOUT);
+            SpinDelayUs(1000);
+        } else {
+            // stop modulating antenna
+            LOW(GPIO_SSC_DOUT);
+            SpinDelayUs(300);
+            // modulate antenna
+            HIGH(GPIO_SSC_DOUT);
+            SpinDelayUs(1700);
+        }
+    }
 }
 
 void AcquireTiType(void)
 {
-	int i, j, n;
-	// tag transmission is <20ms, sampling at 2M gives us 40K samples max
-	// each sample is 1 bit stuffed into a uint32_t so we need 1250 uint32_t
-	#define TIBUFLEN 1250
-
-	// clear buffer
-	memset(BigBuf,0,sizeof(BigBuf));
-
-	// Set up the synchronous serial port
-	AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN;
-	AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN;
-
-	// steal this pin from the SSP and use it to control the modulation
-	AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
-	AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
-
-	AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
-	AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN;
-
-	// Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long
-	// 48/2 = 24 MHz clock must be divided by 12
-	AT91C_BASE_SSC->SSC_CMR = 12;
-
-	AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(0);
-	AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(32) | AT91C_SSC_MSBF;
-	AT91C_BASE_SSC->SSC_TCMR = 0;
-	AT91C_BASE_SSC->SSC_TFMR = 0;
-
-	LED_D_ON();
-
-	// modulate antenna
-	HIGH(GPIO_SSC_DOUT);
-
-	// Charge TI tag for 50ms.
-	SpinDelay(50);
-
-	// stop modulating antenna and listen
-	LOW(GPIO_SSC_DOUT);
-
-	LED_D_OFF();
-
-	i = 0;
-	for(;;) {
-		if(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
-			BigBuf[i] = AT91C_BASE_SSC->SSC_RHR;	// store 32 bit values in buffer
-			i++; if(i >= TIBUFLEN) break;
-		}
-		WDT_HIT();
-	}
-
-	// return stolen pin to SSP
-	AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;
-	AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN | GPIO_SSC_DOUT;
-
-	char *dest = (char *)BigBuf;
-	n = TIBUFLEN*32;
-	// unpack buffer
-	for (i=TIBUFLEN-1; i>=0; i--) {
-		for (j=0; j<32; j++) {
-			if(BigBuf[i] & (1 << j)) {
-				dest[--n] = 1;
-			} else {
-				dest[--n] = -1;
-			}
-		}
-	}
+    int i, j, n;
+    // tag transmission is <20ms, sampling at 2M gives us 40K samples max
+    // each sample is 1 bit stuffed into a uint32_t so we need 1250 uint32_t
+ #define TIBUFLEN 1250
+
+    // clear buffer
+    memset(BigBuf,0,sizeof(BigBuf));
+
+    // Set up the synchronous serial port
+    AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN;
+    AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN;
+
+    // steal this pin from the SSP and use it to control the modulation
+    AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
+    AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
+
+    AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
+    AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN;
+
+    // Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long
+    // 48/2 = 24 MHz clock must be divided by 12
+    AT91C_BASE_SSC->SSC_CMR = 12;
+
+    AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(0);
+    AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(32) | AT91C_SSC_MSBF;
+    AT91C_BASE_SSC->SSC_TCMR = 0;
+    AT91C_BASE_SSC->SSC_TFMR = 0;
+
+    LED_D_ON();
+
+    // modulate antenna
+    HIGH(GPIO_SSC_DOUT);
+
+    // Charge TI tag for 50ms.
+    SpinDelay(50);
+
+    // stop modulating antenna and listen
+    LOW(GPIO_SSC_DOUT);
+
+    LED_D_OFF();
+
+    i = 0;
+    for(;;) {
+        if(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
+            BigBuf[i] = AT91C_BASE_SSC->SSC_RHR;	// store 32 bit values in buffer
+            i++; if(i >= TIBUFLEN) break;
+        }
+        WDT_HIT();
+    }
+
+    // return stolen pin to SSP
+    AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;
+    AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN | GPIO_SSC_DOUT;
+
+    char *dest = (char *)BigBuf;
+    n = TIBUFLEN*32;
+    // unpack buffer
+    for (i=TIBUFLEN-1; i>=0; i--) {
+        for (j=0; j<32; j++) {
+            if(BigBuf[i] & (1 << j)) {
+                dest[--n] = 1;
+            } else {
+                dest[--n] = -1;
+            }
+        }
+    }
 }
 
 // arguments: 64bit data split into 32bit idhi:idlo and optional 16bit crc
@@ -400,127 +397,127 @@ void AcquireTiType(void)
 // if not provided a valid crc will be computed from the data and written.
 void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
 {
-	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);	
-	if(crc == 0) {
-	 	crc = update_crc16(crc, (idlo)&0xff);
-		crc = update_crc16(crc, (idlo>>8)&0xff);
-		crc = update_crc16(crc, (idlo>>16)&0xff);
-		crc = update_crc16(crc, (idlo>>24)&0xff);
-		crc = update_crc16(crc, (idhi)&0xff);
-		crc = update_crc16(crc, (idhi>>8)&0xff);
-		crc = update_crc16(crc, (idhi>>16)&0xff);
-		crc = update_crc16(crc, (idhi>>24)&0xff);
-	}
-	Dbprintf("Writing to tag: %x%08x, crc=%x",
-		(unsigned int) idhi, (unsigned int) idlo, crc);
-
-	// TI tags charge at 134.2Khz
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-	// Place FPGA in passthrough mode, in this mode the CROSS_LO line
-	// connects to SSP_DIN and the SSP_DOUT logic level controls
-	// whether we're modulating the antenna (high)
-	// or listening to the antenna (low)
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
-	LED_A_ON();
-
-	// steal this pin from the SSP and use it to control the modulation
-	AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
-	AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
-
-	// writing algorithm:
-	// a high bit consists of a field off for 1ms and field on for 1ms
-	// a low bit consists of a field off for 0.3ms and field on for 1.7ms
-	// initiate a charge time of 50ms (field on) then immediately start writing bits
-	// start by writing 0xBB (keyword) and 0xEB (password)
-	// then write 80 bits of data (or 64 bit data + 16 bit crc if you prefer)
-	// finally end with 0x0300 (write frame)
-	// all data is sent lsb firts
-	// finish with 15ms programming time
-
-	// modulate antenna
-	HIGH(GPIO_SSC_DOUT);
-	SpinDelay(50);	// charge time
-
-	WriteTIbyte(0xbb); // keyword
-	WriteTIbyte(0xeb); // password
-	WriteTIbyte( (idlo    )&0xff );
-	WriteTIbyte( (idlo>>8 )&0xff );
-	WriteTIbyte( (idlo>>16)&0xff );
-	WriteTIbyte( (idlo>>24)&0xff );
-	WriteTIbyte( (idhi    )&0xff );
-	WriteTIbyte( (idhi>>8 )&0xff );
-	WriteTIbyte( (idhi>>16)&0xff );
-	WriteTIbyte( (idhi>>24)&0xff ); // data hi to lo
-	WriteTIbyte( (crc     )&0xff ); // crc lo
-	WriteTIbyte( (crc>>8  )&0xff ); // crc hi
-	WriteTIbyte(0x00); // write frame lo
-	WriteTIbyte(0x03); // write frame hi
-	HIGH(GPIO_SSC_DOUT);
-	SpinDelay(50);	// programming time
-
-	LED_A_OFF();
-
-	// get TI tag data into the buffer
-	AcquireTiType();
-
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	DbpString("Now use tiread to check");
+    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+    if(crc == 0) {
+        crc = update_crc16(crc, (idlo)&0xff);
+        crc = update_crc16(crc, (idlo>>8)&0xff);
+        crc = update_crc16(crc, (idlo>>16)&0xff);
+        crc = update_crc16(crc, (idlo>>24)&0xff);
+        crc = update_crc16(crc, (idhi)&0xff);
+        crc = update_crc16(crc, (idhi>>8)&0xff);
+        crc = update_crc16(crc, (idhi>>16)&0xff);
+        crc = update_crc16(crc, (idhi>>24)&0xff);
+    }
+    Dbprintf("Writing to tag: %x%08x, crc=%x",
+             (unsigned int) idhi, (unsigned int) idlo, crc);
+
+    // TI tags charge at 134.2Khz
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
+    // Place FPGA in passthrough mode, in this mode the CROSS_LO line
+    // connects to SSP_DIN and the SSP_DOUT logic level controls
+    // whether we're modulating the antenna (high)
+    // or listening to the antenna (low)
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
+    LED_A_ON();
+
+    // steal this pin from the SSP and use it to control the modulation
+    AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
+    AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
+
+    // writing algorithm:
+    // a high bit consists of a field off for 1ms and field on for 1ms
+    // a low bit consists of a field off for 0.3ms and field on for 1.7ms
+    // initiate a charge time of 50ms (field on) then immediately start writing bits
+    // start by writing 0xBB (keyword) and 0xEB (password)
+    // then write 80 bits of data (or 64 bit data + 16 bit crc if you prefer)
+    // finally end with 0x0300 (write frame)
+    // all data is sent lsb firts
+    // finish with 15ms programming time
+
+    // modulate antenna
+    HIGH(GPIO_SSC_DOUT);
+    SpinDelay(50);	// charge time
+
+    WriteTIbyte(0xbb); // keyword
+    WriteTIbyte(0xeb); // password
+    WriteTIbyte( (idlo    )&0xff );
+    WriteTIbyte( (idlo>>8 )&0xff );
+    WriteTIbyte( (idlo>>16)&0xff );
+    WriteTIbyte( (idlo>>24)&0xff );
+    WriteTIbyte( (idhi    )&0xff );
+    WriteTIbyte( (idhi>>8 )&0xff );
+    WriteTIbyte( (idhi>>16)&0xff );
+    WriteTIbyte( (idhi>>24)&0xff ); // data hi to lo
+    WriteTIbyte( (crc     )&0xff ); // crc lo
+    WriteTIbyte( (crc>>8  )&0xff ); // crc hi
+    WriteTIbyte(0x00); // write frame lo
+    WriteTIbyte(0x03); // write frame hi
+    HIGH(GPIO_SSC_DOUT);
+    SpinDelay(50);	// programming time
+
+    LED_A_OFF();
+
+    // get TI tag data into the buffer
+    AcquireTiType();
+
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+    DbpString("Now use tiread to check");
 }
 
 void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 {
-	int i;
-	uint8_t *tab = (uint8_t *)BigBuf;
-    
-	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
-    
-	AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
-    
-	AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
-	AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
-    
+    int i;
+    uint8_t *tab = (uint8_t *)BigBuf;
+
+    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
+
+    AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
+
+    AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
+    AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
+
 #define SHORT_COIL()	LOW(GPIO_SSC_DOUT)
 #define OPEN_COIL()		HIGH(GPIO_SSC_DOUT)
-    
-	i = 0;
-	for(;;) {
-		while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
-			if(BUTTON_PRESS()) {
-				DbpString("Stopped");
-				return;
-			}
-			WDT_HIT();
-		}
-        
-		if (ledcontrol)
-			LED_D_ON();
-        
-		if(tab[i])
-			OPEN_COIL();
-		else
-			SHORT_COIL();
-        
-		if (ledcontrol)
-			LED_D_OFF();
-        
-		while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
-			if(BUTTON_PRESS()) {
-				DbpString("Stopped");
-				return;
-			}
-			WDT_HIT();
-		}
-        
-		i++;
-		if(i == period) {
-			i = 0;
-			if (gap) {
-				SHORT_COIL();
-				SpinDelayUs(gap);
-			}
-		}
-	}
+
+    i = 0;
+    for(;;) {
+        while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
+            if(BUTTON_PRESS()) {
+                DbpString("Stopped");
+                return;
+            }
+            WDT_HIT();
+        }
+
+        if (ledcontrol)
+            LED_D_ON();
+
+        if(tab[i])
+            OPEN_COIL();
+        else
+            SHORT_COIL();
+
+        if (ledcontrol)
+            LED_D_OFF();
+
+        while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
+            if(BUTTON_PRESS()) {
+                DbpString("Stopped");
+                return;
+            }
+            WDT_HIT();
+        }
+
+        i++;
+        if(i == period) {
+            i = 0;
+            if (gap) {
+                SHORT_COIL();
+                SpinDelayUs(gap);
+            }
+        }
+    }
 }
 
 #define DEBUG_FRAME_CONTENTS 1
@@ -530,315 +527,309 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0)
 
 // compose fc/8 fc/10 waveform
 static void fc(int c, int *n) {
-	uint8_t *dest = (uint8_t *)BigBuf;
-	int idx;
-
-	// for when we want an fc8 pattern every 4 logical bits
-	if(c==0) {
-		dest[((*n)++)]=1;
-		dest[((*n)++)]=1;
-		dest[((*n)++)]=0;
-		dest[((*n)++)]=0;
-		dest[((*n)++)]=0;
-		dest[((*n)++)]=0;
-		dest[((*n)++)]=0;
-		dest[((*n)++)]=0;
-	}
-	//	an fc/8  encoded bit is a bit pattern of  11000000  x6 = 48 samples
-	if(c==8) {
-		for (idx=0; idx<6; idx++) {
-			dest[((*n)++)]=1;
-			dest[((*n)++)]=1;
-			dest[((*n)++)]=0;
-			dest[((*n)++)]=0;
-			dest[((*n)++)]=0;
-			dest[((*n)++)]=0;
-			dest[((*n)++)]=0;
-			dest[((*n)++)]=0;
-		}
-	}
-
-	//	an fc/10 encoded bit is a bit pattern of 1110000000 x5 = 50 samples
-	if(c==10) {
-		for (idx=0; idx<5; idx++) {
-			dest[((*n)++)]=1;
-			dest[((*n)++)]=1;
-			dest[((*n)++)]=1;
-			dest[((*n)++)]=0;
-			dest[((*n)++)]=0;
-			dest[((*n)++)]=0;
-			dest[((*n)++)]=0;
-			dest[((*n)++)]=0;
-			dest[((*n)++)]=0;
-			dest[((*n)++)]=0;
-		}
-	}
+    uint8_t *dest = (uint8_t *)BigBuf;
+    int idx;
+
+    // for when we want an fc8 pattern every 4 logical bits
+    if(c==0) {
+        dest[((*n)++)]=1;
+        dest[((*n)++)]=1;
+        dest[((*n)++)]=0;
+        dest[((*n)++)]=0;
+        dest[((*n)++)]=0;
+        dest[((*n)++)]=0;
+        dest[((*n)++)]=0;
+        dest[((*n)++)]=0;
+    }
+    //	an fc/8  encoded bit is a bit pattern of  11000000  x6 = 48 samples
+    if(c==8) {
+        for (idx=0; idx<6; idx++) {
+            dest[((*n)++)]=1;
+            dest[((*n)++)]=1;
+            dest[((*n)++)]=0;
+            dest[((*n)++)]=0;
+            dest[((*n)++)]=0;
+            dest[((*n)++)]=0;
+            dest[((*n)++)]=0;
+            dest[((*n)++)]=0;
+        }
+    }
+
+    //	an fc/10 encoded bit is a bit pattern of 1110000000 x5 = 50 samples
+    if(c==10) {
+        for (idx=0; idx<5; idx++) {
+            dest[((*n)++)]=1;
+            dest[((*n)++)]=1;
+            dest[((*n)++)]=1;
+            dest[((*n)++)]=0;
+            dest[((*n)++)]=0;
+            dest[((*n)++)]=0;
+            dest[((*n)++)]=0;
+            dest[((*n)++)]=0;
+            dest[((*n)++)]=0;
+            dest[((*n)++)]=0;
+        }
+    }
 }
 
 // prepare a waveform pattern in the buffer based on the ID given then
 // simulate a HID tag until the button is pressed
 void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
 {
-	int n=0, i=0;
-	/*
-	 HID tag bitstream format
-	 The tag contains a 44bit unique code. This is sent out MSB first in sets of 4 bits
-	 A 1 bit is represented as 6 fc8 and 5 fc10 patterns
-	 A 0 bit is represented as 5 fc10 and 6 fc8 patterns
-	 A fc8 is inserted before every 4 bits
-	 A special start of frame pattern is used consisting a0b0 where a and b are neither 0
-	 nor 1 bits, they are special patterns (a = set of 12 fc8 and b = set of 10 fc10)
-	*/
-
-	if (hi>0xFFF) {
-		DbpString("Tags can only have 44 bits.");
-		return;
-	}
-	fc(0,&n);
-	// special start of frame marker containing invalid bit sequences
-	fc(8,  &n);	fc(8,  &n);	// invalid
-	fc(8,  &n);	fc(10, &n); // logical 0
-	fc(10, &n);	fc(10, &n); // invalid
-	fc(8,  &n);	fc(10, &n); // logical 0
-
-	WDT_HIT();
-	// manchester encode bits 43 to 32
-	for (i=11; i>=0; i--) {
-		if ((i%4)==3) fc(0,&n);
-		if ((hi>>i)&1) {
-			fc(10, &n);	fc(8,  &n);		// low-high transition
-		} else {
-			fc(8,  &n);	fc(10, &n);		// high-low transition
-		}
-	}
-
-	WDT_HIT();
-	// manchester encode bits 31 to 0
-	for (i=31; i>=0; i--) {
-		if ((i%4)==3) fc(0,&n);
-		if ((lo>>i)&1) {
-			fc(10, &n);	fc(8,  &n);		// low-high transition
-		} else {
-			fc(8,  &n);	fc(10, &n);		// high-low transition
-		}
-	}
-
-	if (ledcontrol)
-		LED_A_ON();
-	SimulateTagLowFrequency(n, 0, ledcontrol);
-
-	if (ledcontrol)
-		LED_A_OFF();
+    int n=0, i=0;
+    /*
+     HID tag bitstream format
+     The tag contains a 44bit unique code. This is sent out MSB first in sets of 4 bits
+     A 1 bit is represented as 6 fc8 and 5 fc10 patterns
+     A 0 bit is represented as 5 fc10 and 6 fc8 patterns
+     A fc8 is inserted before every 4 bits
+     A special start of frame pattern is used consisting a0b0 where a and b are neither 0
+     nor 1 bits, they are special patterns (a = set of 12 fc8 and b = set of 10 fc10)
+    */
+
+    if (hi>0xFFF) {
+        DbpString("Tags can only have 44 bits.");
+        return;
+    }
+    fc(0,&n);
+    // special start of frame marker containing invalid bit sequences
+    fc(8,  &n);	fc(8,  &n);	// invalid
+    fc(8,  &n);	fc(10, &n); // logical 0
+    fc(10, &n);	fc(10, &n); // invalid
+    fc(8,  &n);	fc(10, &n); // logical 0
+
+    WDT_HIT();
+    // manchester encode bits 43 to 32
+    for (i=11; i>=0; i--) {
+        if ((i%4)==3) fc(0,&n);
+        if ((hi>>i)&1) {
+            fc(10, &n);	fc(8,  &n);		// low-high transition
+        } else {
+            fc(8,  &n);	fc(10, &n);		// high-low transition
+        }
+    }
+
+    WDT_HIT();
+    // manchester encode bits 31 to 0
+    for (i=31; i>=0; i--) {
+        if ((i%4)==3) fc(0,&n);
+        if ((lo>>i)&1) {
+            fc(10, &n);	fc(8,  &n);		// low-high transition
+        } else {
+            fc(8,  &n);	fc(10, &n);		// high-low transition
+        }
+    }
+
+    if (ledcontrol)
+        LED_A_ON();
+    SimulateTagLowFrequency(n, 0, ledcontrol);
+
+    if (ledcontrol)
+        LED_A_OFF();
 }
 
 // loop to get raw HID waveform then FSK demodulate the TAG ID from it
 void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 {
-	uint8_t *dest = (uint8_t *)BigBuf;
-
-	size_t size=0; //, found=0;
-	uint32_t hi2=0, hi=0, lo=0;
-
-	// Configure to go in 125Khz listen mode
-	LFSetupFPGAForADC(95, true);
-
-	while(!BUTTON_PRESS()) {
-
-		WDT_HIT();
-		if (ledcontrol) LED_A_ON();
-
-		DoAcquisition125k_internal(-1,true);
-		size  = sizeof(BigBuf);
-    if (size < 2000) continue; 
-		// FSK demodulator
-
-		int bitLen = HIDdemodFSK(dest,size,&hi2,&hi,&lo);
-		
-		WDT_HIT();
-
-		if (bitLen>0 && lo>0){
-		// final loop, go over previously decoded manchester data and decode into usable tag ID
-		// 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0
-			if (hi2 != 0){ //extra large HID tags
-				Dbprintf("TAG ID: %x%08x%08x (%d)",
-					 (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
-			}else {  //standard HID tags <38 bits
-				//Dbprintf("TAG ID: %x%08x (%d)",(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); //old print cmd
-				uint8_t bitlen = 0;
-				uint32_t fc = 0;
-				uint32_t cardnum = 0;
-				if (((hi>>5)&1)==1){//if bit 38 is set then < 37 bit format is used
-					uint32_t lo2=0;
-					lo2=(((hi & 31) << 12) | (lo>>20)); //get bits 21-37 to check for format len bit
-					uint8_t idx3 = 1;
-					while(lo2>1){ //find last bit set to 1 (format len bit)
-						lo2=lo2>>1;
-						idx3++;
-					}
-					bitlen =idx3+19;  
-					fc =0;
-					cardnum=0;
-					if(bitlen==26){
-						cardnum = (lo>>1)&0xFFFF;
-						fc = (lo>>17)&0xFF;
-					}
-					if(bitlen==37){
-						cardnum = (lo>>1)&0x7FFFF;
-						fc = ((hi&0xF)<<12)|(lo>>20);
-					}
-					if(bitlen==34){
-						cardnum = (lo>>1)&0xFFFF;
-						fc= ((hi&1)<<15)|(lo>>17);
-					}
-					if(bitlen==35){
-						cardnum = (lo>>1)&0xFFFFF;
-						fc = ((hi&1)<<11)|(lo>>21);
-					}
-				}
-				else { //if bit 38 is not set then 37 bit format is used
-					bitlen= 37;
-					fc =0;
-					cardnum=0;
-					if(bitlen==37){
-						cardnum = (lo>>1)&0x7FFFF;
-						fc = ((hi&0xF)<<12)|(lo>>20);
-					}
-				}
-						//Dbprintf("TAG ID: %x%08x (%d)",
-				// (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);				
-				Dbprintf("TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d",
-					(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF,
-					(unsigned int) bitlen, (unsigned int) fc, (unsigned int) cardnum);
-			}
-			if (findone){
-				if (ledcontrol)	LED_A_OFF();
-				return;
-			}
-			// reset
-			hi2 = hi = lo = 0;
-		}
-		WDT_HIT();
-		//SpinDelay(50);
-	}	
-	DbpString("Stopped");
-	if (ledcontrol) LED_A_OFF();
+    uint8_t *dest = (uint8_t *)BigBuf;
+
+    size_t size=sizeof(BigBuf), idx=0; //, found=0;
+    uint32_t hi2=0, hi=0, lo=0;
+
+    // Configure to go in 125Khz listen mode
+    LFSetupFPGAForADC(95, true);
+
+    while(!BUTTON_PRESS()) {
+
+        WDT_HIT();
+        if (ledcontrol) LED_A_ON();
+
+        DoAcquisition125k_internal(-1,true);
+        // FSK demodulator
+		idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo);
+
+        WDT_HIT();
+
+		if (idx>0 && lo>0){
+            // final loop, go over previously decoded manchester data and decode into usable tag ID
+            // 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0
+            if (hi2 != 0){ //extra large HID tags
+                Dbprintf("TAG ID: %x%08x%08x (%d)",
+                         (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
+            }else {  //standard HID tags <38 bits
+                //Dbprintf("TAG ID: %x%08x (%d)",(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); //old print cmd
+                uint8_t bitlen = 0;
+                uint32_t fc = 0;
+                uint32_t cardnum = 0;
+				if (((hi>>5)&1) == 1){//if bit 38 is set then < 37 bit format is used
+                    uint32_t lo2=0;
+                    lo2=(((hi & 31) << 12) | (lo>>20)); //get bits 21-37 to check for format len bit
+                    uint8_t idx3 = 1;
+					while(lo2 > 1){ //find last bit set to 1 (format len bit)
+						lo2=lo2 >> 1;
+                        idx3++;
+                    }
+					bitlen = idx3+19;
+                    fc =0;
+                    cardnum=0;
+					if(bitlen == 26){
+                        cardnum = (lo>>1)&0xFFFF;
+                        fc = (lo>>17)&0xFF;
+                    }
+					if(bitlen == 37){
+                        cardnum = (lo>>1)&0x7FFFF;
+                        fc = ((hi&0xF)<<12)|(lo>>20);
+                    }
+					if(bitlen == 34){
+                        cardnum = (lo>>1)&0xFFFF;
+                        fc= ((hi&1)<<15)|(lo>>17);
+                    }
+					if(bitlen == 35){
+                        cardnum = (lo>>1)&0xFFFFF;
+                        fc = ((hi&1)<<11)|(lo>>21);
+                    }
+                }
+                else { //if bit 38 is not set then 37 bit format is used
+                    bitlen= 37;
+                    fc =0;
+                    cardnum=0;
+                    if(bitlen==37){
+                        cardnum = (lo>>1)&0x7FFFF;
+                        fc = ((hi&0xF)<<12)|(lo>>20);
+                    }
+                }
+                //Dbprintf("TAG ID: %x%08x (%d)",
+                // (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
+                Dbprintf("TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d",
+                         (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF,
+                         (unsigned int) bitlen, (unsigned int) fc, (unsigned int) cardnum);
+            }
+            if (findone){
+                if (ledcontrol)	LED_A_OFF();
+                return;
+            }
+            // reset
+            hi2 = hi = lo = 0;
+        }
+        WDT_HIT();
+    }
+    DbpString("Stopped");
+    if (ledcontrol) LED_A_OFF();
 }
 
 void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
 {
-	uint8_t *dest = (uint8_t *)BigBuf;
-
-	size_t size=0; //, found=0;
-	uint32_t bitLen=0;
-	int clk=0, invert=0, errCnt=0;
-	uint64_t lo=0;
-	// Configure to go in 125Khz listen mode
-	LFSetupFPGAForADC(95, true);
-
-	while(!BUTTON_PRESS()) {
-
-		WDT_HIT();
-		if (ledcontrol) LED_A_ON();
-
-		DoAcquisition125k_internal(-1,true);
-		size  = sizeof(BigBuf);
-    if (size < 2000) continue; 
-		// FSK demodulator
-     //int askmandemod(uint8_t *BinStream,uint32_t *BitLen,int *clk, int *invert);
-    bitLen=size;
-    //Dbprintf("DEBUG: Buffer got");
-    errCnt = askmandemod(dest,&bitLen,&clk,&invert); //HIDdemodFSK(dest,size,&hi2,&hi,&lo);
-		//Dbprintf("DEBUG: ASK Got");
-		WDT_HIT();
-
-		if (errCnt>=0){
-			lo = Em410xDecode(dest,bitLen);
-			//Dbprintf("DEBUG: EM GOT");
-  		//printEM410x(lo);
-  		if (lo>0){
-    		Dbprintf("EM TAG ID: %02x%08x - (%05d_%03d_%08d)",(uint32_t)(lo>>32),(uint32_t)lo,(uint32_t)(lo&0xFFFF),(uint32_t)((lo>>16LL) & 0xFF),(uint32_t)(lo & 0xFFFFFF));
-    	}
-			if (findone){
-				if (ledcontrol)	LED_A_OFF();
-				return;
-			}
-		} else{
-			//Dbprintf("DEBUG: No Tag");
-		}
-		WDT_HIT();
-		lo = 0;
-		clk=0;
-    invert=0;
-		errCnt=0;
-		size=0;
-		//SpinDelay(50);
-	}	
-	DbpString("Stopped");
-	if (ledcontrol) LED_A_OFF();
+    uint8_t *dest = (uint8_t *)BigBuf;
+
+	size_t size=0, idx=0;
+    int clk=0, invert=0, errCnt=0;
+    uint64_t lo=0;
+    // Configure to go in 125Khz listen mode
+    LFSetupFPGAForADC(95, true);
+
+    while(!BUTTON_PRESS()) {
+
+        WDT_HIT();
+        if (ledcontrol) LED_A_ON();
+
+        DoAcquisition125k_internal(-1,true);
+        size  = sizeof(BigBuf);
+        //Dbprintf("DEBUG: Buffer got");
+		//askdemod and manchester decode
+		errCnt = askmandemod(dest, &size, &clk, &invert);
+        //Dbprintf("DEBUG: ASK Got");
+        WDT_HIT();
+
+        if (errCnt>=0){
+			lo = Em410xDecode(dest, &size, &idx);
+            //Dbprintf("DEBUG: EM GOT");
+            if (lo>0){
+				Dbprintf("EM TAG ID: %02x%08x - (%05d_%03d_%08d)",
+				    (uint32_t)(lo>>32),
+				    (uint32_t)lo,
+				    (uint32_t)(lo&0xFFFF),
+				    (uint32_t)((lo>>16LL) & 0xFF),
+				    (uint32_t)(lo & 0xFFFFFF));
+            }
+            if (findone){
+                if (ledcontrol)	LED_A_OFF();
+                return;
+            }
+        } else{
+            //Dbprintf("DEBUG: No Tag");
+        }
+        WDT_HIT();
+        lo = 0;
+        clk=0;
+        invert=0;
+        errCnt=0;
+        size=0;
+    }
+    DbpString("Stopped");
+    if (ledcontrol) LED_A_OFF();
 }
 
 void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 {
-	uint8_t *dest = (uint8_t *)BigBuf;
-	size_t size=0;
-	int idx=0;
-	uint32_t code=0, code2=0;
-  uint8_t version=0;
-  uint8_t facilitycode=0;
-  uint16_t number=0;
-	// Configure to go in 125Khz listen mode
-	LFSetupFPGAForADC(95, true);
-	
-	while(!BUTTON_PRESS()) {
-		WDT_HIT();
-		if (ledcontrol) LED_A_ON();
-		DoAcquisition125k_internal(-1,true);
-		//fskdemod and get start index
-		WDT_HIT();
+    uint8_t *dest = (uint8_t *)BigBuf;
+    int idx=0;
+    uint32_t code=0, code2=0;
+    uint8_t version=0;
+    uint8_t facilitycode=0;
+    uint16_t number=0;
+    // Configure to go in 125Khz listen mode
+    LFSetupFPGAForADC(95, true);
+
+    while(!BUTTON_PRESS()) {
+        WDT_HIT();
+        if (ledcontrol) LED_A_ON();
+        DoAcquisition125k_internal(-1,true);
+        //fskdemod and get start index
+        WDT_HIT();
         idx = IOdemodFSK(dest,sizeof(BigBuf));
-		if (idx>0){
-			//valid tag found
-
-			//Index map
-			//0           10          20          30          40          50          60
-			//|           |           |           |           |           |           |
-			//01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23
-			//-----------------------------------------------------------------------------
-			//00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 ???????? 11
-			//
-			//XSF(version)facility:codeone+codetwo
-			//Handle the data
-      if(findone){ //only print binary if we are doing one
- 	    	Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx],   dest[idx+1],   dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7],dest[idx+8]);
-		    Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15],dest[idx+16],dest[idx+17]);			  
-		    Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23],dest[idx+24],dest[idx+25],dest[idx+26]);
-		    Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31],dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35]);
-		    Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39],dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44]);
-		    Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+45],dest[idx+46],dest[idx+47],dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53]);
-		    Dbprintf("%d%d%d%d%d%d%d%d %d%d",dest[idx+54],dest[idx+55],dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]);
-			}
-			code = bytebits_to_byte(dest+idx,32);
-        code2 = bytebits_to_byte(dest+idx+32,32);
-	    version = bytebits_to_byte(dest+idx+27,8); //14,4
-	    facilitycode = bytebits_to_byte(dest+idx+18,8) ;
-	    number = (bytebits_to_byte(dest+idx+36,8)<<8)|(bytebits_to_byte(dest+idx+45,8)); //36,9
-	    
-	    Dbprintf("XSF(%02d)%02x:%05d (%08x%08x)",version,facilitycode,number,code,code2);			
-			// if we're only looking for one tag 
-			if (findone){
-				if (ledcontrol)	LED_A_OFF();
-				//LED_A_OFF();
-				return;
-			}
-			code=code2=0;
-			version=facilitycode=0;
-			number=0;
-			idx=0;
-		}	
-		WDT_HIT();
-	}
-	DbpString("Stopped");
-	if (ledcontrol) LED_A_OFF();
+        if (idx>0){
+            //valid tag found
+
+            //Index map
+            //0           10          20          30          40          50          60
+            //|           |           |           |           |           |           |
+            //01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23
+            //-----------------------------------------------------------------------------
+            //00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 ???????? 11
+            //
+            //XSF(version)facility:codeone+codetwo
+            //Handle the data
+            if(findone){ //only print binary if we are doing one
+                Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx],   dest[idx+1],   dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7],dest[idx+8]);
+                Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15],dest[idx+16],dest[idx+17]);
+                Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23],dest[idx+24],dest[idx+25],dest[idx+26]);
+                Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31],dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35]);
+                Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39],dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44]);
+                Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+45],dest[idx+46],dest[idx+47],dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53]);
+                Dbprintf("%d%d%d%d%d%d%d%d %d%d",dest[idx+54],dest[idx+55],dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]);
+            }
+            code = bytebits_to_byte(dest+idx,32);
+            code2 = bytebits_to_byte(dest+idx+32,32);
+            version = bytebits_to_byte(dest+idx+27,8); //14,4
+            facilitycode = bytebits_to_byte(dest+idx+18,8) ;
+            number = (bytebits_to_byte(dest+idx+36,8)<<8)|(bytebits_to_byte(dest+idx+45,8)); //36,9
+
+            Dbprintf("XSF(%02d)%02x:%05d (%08x%08x)",version,facilitycode,number,code,code2);
+            // if we're only looking for one tag
+            if (findone){
+                if (ledcontrol)	LED_A_OFF();
+                //LED_A_OFF();
+                return;
+            }
+            code=code2=0;
+            version=facilitycode=0;
+            number=0;
+            idx=0;
+        }
+        WDT_HIT();
+    }
+    DbpString("Stopped");
+    if (ledcontrol) LED_A_OFF();
 }
 
 /*------------------------------
@@ -908,320 +899,320 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 // Write one bit to card
 void T55xxWriteBit(int bit)
 {
-	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-	if (bit == 0)
-		SpinDelayUs(WRITE_0);
-	else
-		SpinDelayUs(WRITE_1);
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	SpinDelayUs(WRITE_GAP);
+    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+    if (bit == 0)
+        SpinDelayUs(WRITE_0);
+    else
+        SpinDelayUs(WRITE_1);
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+    SpinDelayUs(WRITE_GAP);
 }
 
 // Write one card block in page 0, no lock
 void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
 {
-	//unsigned int i;  //enio adjustment 12/10/14
-	uint32_t i;
-
-	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-
-	// Give it a bit of time for the resonant antenna to settle.
-	// And for the tag to fully power up
-	SpinDelay(150);
-
-	// Now start writting
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	SpinDelayUs(START_GAP);
-
-	// Opcode
-	T55xxWriteBit(1);
-	T55xxWriteBit(0); //Page 0
-  if (PwdMode == 1){
-    // Pwd
+    //unsigned int i;  //enio adjustment 12/10/14
+    uint32_t i;
+
+    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+
+    // Give it a bit of time for the resonant antenna to settle.
+    // And for the tag to fully power up
+    SpinDelay(150);
+
+    // Now start writting
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+    SpinDelayUs(START_GAP);
+
+    // Opcode
+    T55xxWriteBit(1);
+    T55xxWriteBit(0); //Page 0
+    if (PwdMode == 1){
+        // Pwd
+        for (i = 0x80000000; i != 0; i >>= 1)
+            T55xxWriteBit(Pwd & i);
+    }
+    // Lock bit
+    T55xxWriteBit(0);
+
+    // Data
     for (i = 0x80000000; i != 0; i >>= 1)
-      T55xxWriteBit(Pwd & i);
-  }
-	// Lock bit
-	T55xxWriteBit(0);
-
-	// Data
-	for (i = 0x80000000; i != 0; i >>= 1)
-		T55xxWriteBit(Data & i);
-
-	// Block
-	for (i = 0x04; i != 0; i >>= 1)
-		T55xxWriteBit(Block & i);
-
-	// Now perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
-	// so wait a little more)
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-	SpinDelay(20);
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+        T55xxWriteBit(Data & i);
+
+    // Block
+    for (i = 0x04; i != 0; i >>= 1)
+        T55xxWriteBit(Block & i);
+
+    // Now perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
+    // so wait a little more)
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+    SpinDelay(20);
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 }
 
 // Read one card block in page 0
 void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
 {
-	uint8_t *dest = (uint8_t *)BigBuf;
-	//int m=0, i=0; //enio adjustment 12/10/14
-  	uint32_t m=0, i=0;
-	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-	m = sizeof(BigBuf);
-  // Clear destination buffer before sending the command
-	memset(dest, 128, m);
-	// Connect the A/D to the peak-detected low-frequency path.
-	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-	// Now set up the SSC to get the ADC samples that are now streaming at us.
-	FpgaSetupSsc();
-  
-	LED_D_ON();
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-  
-	// Give it a bit of time for the resonant antenna to settle.
-	// And for the tag to fully power up
-	SpinDelay(150);
-  
-	// Now start writting
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	SpinDelayUs(START_GAP);
-  
-	// Opcode
-	T55xxWriteBit(1);
-	T55xxWriteBit(0); //Page 0
-	if (PwdMode == 1){
-		// Pwd
-		for (i = 0x80000000; i != 0; i >>= 1)
-			T55xxWriteBit(Pwd & i);
-	}
-	// Lock bit
-	T55xxWriteBit(0);
-	// Block
-	for (i = 0x04; i != 0; i >>= 1)
-		T55xxWriteBit(Block & i);
-  
-  // Turn field on to read the response
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-  
-	// Now do the acquisition
-	i = 0;
-	for(;;) {
-		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
-			AT91C_BASE_SSC->SSC_THR = 0x43;
-		}
-		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
-			dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-			// we don't care about actual value, only if it's more or less than a
-			// threshold essentially we capture zero crossings for later analysis
-      //			if(dest[i] < 127) dest[i] = 0; else dest[i] = 1;
-			i++;
-			if (i >= m) break;
-		}
-	}
-  
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-	LED_D_OFF();
-	DbpString("DONE!");
+    uint8_t *dest = (uint8_t *)BigBuf;
+    //int m=0, i=0; //enio adjustment 12/10/14
+    uint32_t m=0, i=0;
+    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+    m = sizeof(BigBuf);
+    // Clear destination buffer before sending the command
+    memset(dest, 128, m);
+    // Connect the A/D to the peak-detected low-frequency path.
+    SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
+    // Now set up the SSC to get the ADC samples that are now streaming at us.
+    FpgaSetupSsc();
+
+    LED_D_ON();
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+
+    // Give it a bit of time for the resonant antenna to settle.
+    // And for the tag to fully power up
+    SpinDelay(150);
+
+    // Now start writting
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+    SpinDelayUs(START_GAP);
+
+    // Opcode
+    T55xxWriteBit(1);
+    T55xxWriteBit(0); //Page 0
+    if (PwdMode == 1){
+        // Pwd
+        for (i = 0x80000000; i != 0; i >>= 1)
+            T55xxWriteBit(Pwd & i);
+    }
+    // Lock bit
+    T55xxWriteBit(0);
+    // Block
+    for (i = 0x04; i != 0; i >>= 1)
+        T55xxWriteBit(Block & i);
+
+    // Turn field on to read the response
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+
+    // Now do the acquisition
+    i = 0;
+    for(;;) {
+        if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
+            AT91C_BASE_SSC->SSC_THR = 0x43;
+        }
+        if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
+            dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
+            // we don't care about actual value, only if it's more or less than a
+            // threshold essentially we capture zero crossings for later analysis
+            //			if(dest[i] < 127) dest[i] = 0; else dest[i] = 1;
+            i++;
+            if (i >= m) break;
+        }
+    }
+
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+    LED_D_OFF();
+    DbpString("DONE!");
 }
 
 // Read card traceability data (page 1)
 void T55xxReadTrace(void){
-	uint8_t *dest = (uint8_t *)BigBuf;
-	int m=0, i=0;
-  
-	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-	m = sizeof(BigBuf);
-  // Clear destination buffer before sending the command
-	memset(dest, 128, m);
-	// Connect the A/D to the peak-detected low-frequency path.
-	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-	// Now set up the SSC to get the ADC samples that are now streaming at us.
-	FpgaSetupSsc();
-  
-	LED_D_ON();
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-  
-	// Give it a bit of time for the resonant antenna to settle.
-	// And for the tag to fully power up
-	SpinDelay(150);
-  
-	// Now start writting
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	SpinDelayUs(START_GAP);
-  
-	// Opcode
-	T55xxWriteBit(1);
-	T55xxWriteBit(1); //Page 1
-  
-  // Turn field on to read the response
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-  
-	// Now do the acquisition
-	i = 0;
-	for(;;) {
-		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
-			AT91C_BASE_SSC->SSC_THR = 0x43;
-		}
-		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
-			dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-			i++;
-			if (i >= m) break;
-		}
-	}
-  
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-	LED_D_OFF();
-	DbpString("DONE!");
+    uint8_t *dest = (uint8_t *)BigBuf;
+    int m=0, i=0;
+
+    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+    m = sizeof(BigBuf);
+    // Clear destination buffer before sending the command
+    memset(dest, 128, m);
+    // Connect the A/D to the peak-detected low-frequency path.
+    SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
+    // Now set up the SSC to get the ADC samples that are now streaming at us.
+    FpgaSetupSsc();
+
+    LED_D_ON();
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+
+    // Give it a bit of time for the resonant antenna to settle.
+    // And for the tag to fully power up
+    SpinDelay(150);
+
+    // Now start writting
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+    SpinDelayUs(START_GAP);
+
+    // Opcode
+    T55xxWriteBit(1);
+    T55xxWriteBit(1); //Page 1
+
+    // Turn field on to read the response
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+
+    // Now do the acquisition
+    i = 0;
+    for(;;) {
+        if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
+            AT91C_BASE_SSC->SSC_THR = 0x43;
+        }
+        if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
+            dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
+            i++;
+            if (i >= m) break;
+        }
+    }
+
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+    LED_D_OFF();
+    DbpString("DONE!");
 }
 
 /*-------------- Cloning routines -----------*/
 // Copy HID id to card and setup block 0 config
 void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
 {
-	int data1=0, data2=0, data3=0, data4=0, data5=0, data6=0; //up to six blocks for long format
-	int last_block = 0;
-  
-  if (longFMT){
-	  // Ensure no more than 84 bits supplied
-	  if (hi2>0xFFFFF) {
-		  DbpString("Tags can only have 84 bits.");
-		  return;
-	  }
-    // Build the 6 data blocks for supplied 84bit ID
-    last_block = 6;
-    data1 = 0x1D96A900; // load preamble (1D) & long format identifier (9E manchester encoded)
-	  for (int i=0;i<4;i++) {
-		  if (hi2 & (1<<(19-i)))
-			  data1 |= (1<<(((3-i)*2)+1)); // 1 -> 10
-		  else
-			  data1 |= (1<<((3-i)*2)); // 0 -> 01
-	  }
-    
-  	data2 = 0;
-  	for (int i=0;i<16;i++) {
-  		if (hi2 & (1<<(15-i)))
-  			data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10
-  		else
-  			data2 |= (1<<((15-i)*2)); // 0 -> 01
-    }
-    
-  	data3 = 0;
-  	for (int i=0;i<16;i++) {
-  		if (hi & (1<<(31-i)))
-  			data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10
-  		else
-  			data3 |= (1<<((15-i)*2)); // 0 -> 01
-  	}
-    
-  	data4 = 0;
-  	for (int i=0;i<16;i++) {
-  		if (hi & (1<<(15-i)))
-  			data4 |= (1<<(((15-i)*2)+1)); // 1 -> 10
-  		else
-  			data4 |= (1<<((15-i)*2)); // 0 -> 01
+    int data1=0, data2=0, data3=0, data4=0, data5=0, data6=0; //up to six blocks for long format
+    int last_block = 0;
+
+    if (longFMT){
+        // Ensure no more than 84 bits supplied
+        if (hi2>0xFFFFF) {
+            DbpString("Tags can only have 84 bits.");
+            return;
+        }
+        // Build the 6 data blocks for supplied 84bit ID
+        last_block = 6;
+        data1 = 0x1D96A900; // load preamble (1D) & long format identifier (9E manchester encoded)
+        for (int i=0;i<4;i++) {
+            if (hi2 & (1<<(19-i)))
+                data1 |= (1<<(((3-i)*2)+1)); // 1 -> 10
+            else
+                data1 |= (1<<((3-i)*2)); // 0 -> 01
+        }
+
+        data2 = 0;
+        for (int i=0;i<16;i++) {
+            if (hi2 & (1<<(15-i)))
+                data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+            else
+                data2 |= (1<<((15-i)*2)); // 0 -> 01
+        }
+
+        data3 = 0;
+        for (int i=0;i<16;i++) {
+            if (hi & (1<<(31-i)))
+                data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+            else
+                data3 |= (1<<((15-i)*2)); // 0 -> 01
+        }
+
+        data4 = 0;
+        for (int i=0;i<16;i++) {
+            if (hi & (1<<(15-i)))
+                data4 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+            else
+                data4 |= (1<<((15-i)*2)); // 0 -> 01
+        }
+
+        data5 = 0;
+        for (int i=0;i<16;i++) {
+            if (lo & (1<<(31-i)))
+                data5 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+            else
+                data5 |= (1<<((15-i)*2)); // 0 -> 01
+        }
+
+        data6 = 0;
+        for (int i=0;i<16;i++) {
+            if (lo & (1<<(15-i)))
+                data6 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+            else
+                data6 |= (1<<((15-i)*2)); // 0 -> 01
+        }
     }
-    
-  	data5 = 0;
-  	for (int i=0;i<16;i++) {
-  		if (lo & (1<<(31-i)))
-  			data5 |= (1<<(((15-i)*2)+1)); // 1 -> 10
-  		else
-  			data5 |= (1<<((15-i)*2)); // 0 -> 01
-  	}
-    
-  	data6 = 0;
-  	for (int i=0;i<16;i++) {
-  		if (lo & (1<<(15-i)))
-  			data6 |= (1<<(((15-i)*2)+1)); // 1 -> 10
-  		else
-  			data6 |= (1<<((15-i)*2)); // 0 -> 01
+    else {
+        // Ensure no more than 44 bits supplied
+        if (hi>0xFFF) {
+            DbpString("Tags can only have 44 bits.");
+            return;
+        }
+
+        // Build the 3 data blocks for supplied 44bit ID
+        last_block = 3;
+
+        data1 = 0x1D000000; // load preamble
+
+        for (int i=0;i<12;i++) {
+            if (hi & (1<<(11-i)))
+                data1 |= (1<<(((11-i)*2)+1)); // 1 -> 10
+            else
+                data1 |= (1<<((11-i)*2)); // 0 -> 01
+        }
+
+        data2 = 0;
+        for (int i=0;i<16;i++) {
+            if (lo & (1<<(31-i)))
+                data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+            else
+                data2 |= (1<<((15-i)*2)); // 0 -> 01
+        }
+
+        data3 = 0;
+        for (int i=0;i<16;i++) {
+            if (lo & (1<<(15-i)))
+                data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+            else
+                data3 |= (1<<((15-i)*2)); // 0 -> 01
+        }
     }
-  }
-  else {
-	  // Ensure no more than 44 bits supplied
-	  if (hi>0xFFF) {
-		  DbpString("Tags can only have 44 bits.");
-		  return;
-	  }
-    
-  	// Build the 3 data blocks for supplied 44bit ID
-  	last_block = 3;
-  	
-  	data1 = 0x1D000000; // load preamble
-    
-    for (int i=0;i<12;i++) {
-      if (hi & (1<<(11-i)))
-        data1 |= (1<<(((11-i)*2)+1)); // 1 -> 10
-      else
-        data1 |= (1<<((11-i)*2)); // 0 -> 01
+
+    LED_D_ON();
+    // Program the data blocks for supplied ID
+    // and the block 0 for HID format
+    T55xxWriteBlock(data1,1,0,0);
+    T55xxWriteBlock(data2,2,0,0);
+    T55xxWriteBlock(data3,3,0,0);
+
+    if (longFMT) { // if long format there are 6 blocks
+        T55xxWriteBlock(data4,4,0,0);
+        T55xxWriteBlock(data5,5,0,0);
+        T55xxWriteBlock(data6,6,0,0);
     }
-    
-  	data2 = 0;
-  	for (int i=0;i<16;i++) {
-  		if (lo & (1<<(31-i)))
-  			data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10
-  		else
-  			data2 |= (1<<((15-i)*2)); // 0 -> 01
-  	}
-    
-  	data3 = 0;
-  	for (int i=0;i<16;i++) {
-  		if (lo & (1<<(15-i)))
-  			data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10
-  		else
-  			data3 |= (1<<((15-i)*2)); // 0 -> 01
-  	}
-  }
-  
-	LED_D_ON();
-	// Program the data blocks for supplied ID
-	// and the block 0 for HID format
-	T55xxWriteBlock(data1,1,0,0);
-	T55xxWriteBlock(data2,2,0,0);
-	T55xxWriteBlock(data3,3,0,0);
-	
-	if (longFMT) { // if long format there are 6 blocks
-	  T55xxWriteBlock(data4,4,0,0);
-	  T55xxWriteBlock(data5,5,0,0);
-	  T55xxWriteBlock(data6,6,0,0);
-  }
-  
-	// Config for HID (RF/50, FSK2a, Maxblock=3 for short/6 for long)
-	T55xxWriteBlock(T55x7_BITRATE_RF_50    |
-                  T55x7_MODULATION_FSK2a |
-                  last_block << T55x7_MAXBLOCK_SHIFT,
-                  0,0,0);
-  
-	LED_D_OFF();
-	
-	DbpString("DONE!");
+
+    // Config for HID (RF/50, FSK2a, Maxblock=3 for short/6 for long)
+    T55xxWriteBlock(T55x7_BITRATE_RF_50    |
+                    T55x7_MODULATION_FSK2a |
+                    last_block << T55x7_MAXBLOCK_SHIFT,
+                    0,0,0);
+
+    LED_D_OFF();
+
+    DbpString("DONE!");
 }
 
 void CopyIOtoT55x7(uint32_t hi, uint32_t lo, uint8_t longFMT)
 {
-   int data1=0, data2=0; //up to six blocks for long format
-  	
+    int data1=0, data2=0; //up to six blocks for long format
+
     data1 = hi;  // load preamble
     data2 = lo;
-    
+
     LED_D_ON();
     // Program the data blocks for supplied ID
     // and the block 0 for HID format
     T55xxWriteBlock(data1,1,0,0);
     T55xxWriteBlock(data2,2,0,0);
-	
+
     //Config Block
     T55xxWriteBlock(0x00147040,0,0,0);
     LED_D_OFF();
-	
+
     DbpString("DONE!");
 }
 
@@ -1231,151 +1222,151 @@ void CopyIOtoT55x7(uint32_t hi, uint32_t lo, uint8_t longFMT)
 
 void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo)
 {
-	int i, id_bit;
-	uint64_t id = EM410X_HEADER;
-	uint64_t rev_id = 0;	// reversed ID
-	int c_parity[4];	// column parity
-	int r_parity = 0;	// row parity
-	uint32_t clock = 0;
-
-	// Reverse ID bits given as parameter (for simpler operations)
-	for (i = 0; i < EM410X_ID_LENGTH; ++i) {
-		if (i < 32) {
-			rev_id = (rev_id << 1) | (id_lo & 1);
-			id_lo >>= 1;
-		} else {
-			rev_id = (rev_id << 1) | (id_hi & 1);
-			id_hi >>= 1;
-		}
-	}
-
-	for (i = 0; i < EM410X_ID_LENGTH; ++i) {
-		id_bit = rev_id & 1;
-
-		if (i % 4 == 0) {
-			// Don't write row parity bit at start of parsing
-			if (i)
-				id = (id << 1) | r_parity;
-			// Start counting parity for new row
-			r_parity = id_bit;
-		} else {
-			// Count row parity
-			r_parity ^= id_bit;
-		}
-
-		// First elements in column?
-		if (i < 4)
-			// Fill out first elements
-			c_parity[i] = id_bit;
-		else
-			// Count column parity
-			c_parity[i % 4] ^= id_bit;
-
-		// Insert ID bit
-		id = (id << 1) | id_bit;
-		rev_id >>= 1;
-	}
-
-	// Insert parity bit of last row
-	id = (id << 1) | r_parity;
-
-	// Fill out column parity at the end of tag
-	for (i = 0; i < 4; ++i)
-		id = (id << 1) | c_parity[i];
-
-	// Add stop bit
-	id <<= 1;
-
-	Dbprintf("Started writing %s tag ...", card ? "T55x7":"T5555");
-	LED_D_ON();
-
-	// Write EM410x ID
-	T55xxWriteBlock((uint32_t)(id >> 32), 1, 0, 0);
-	T55xxWriteBlock((uint32_t)id, 2, 0, 0);
-
-	// Config for EM410x (RF/64, Manchester, Maxblock=2)
-	if (card) {
-		// Clock rate is stored in bits 8-15 of the card value
-		clock = (card & 0xFF00) >> 8;
-		Dbprintf("Clock rate: %d", clock);
-		switch (clock)
-		{
-			case 32:
-				clock = T55x7_BITRATE_RF_32;
-				break;
-			case 16:
-				clock = T55x7_BITRATE_RF_16;
-				break;
-			case 0:
-				// A value of 0 is assumed to be 64 for backwards-compatibility
-				// Fall through...
-			case 64:
-				clock = T55x7_BITRATE_RF_64;
-				break;      
-			default:
-				Dbprintf("Invalid clock rate: %d", clock);
-				return;
-		}
-
-		// Writing configuration for T55x7 tag
-		T55xxWriteBlock(clock	    |
-				T55x7_MODULATION_MANCHESTER |
-				2 << T55x7_MAXBLOCK_SHIFT,
-				0, 0, 0);
-  }
-	else
-		// Writing configuration for T5555(Q5) tag
-		T55xxWriteBlock(0x1F << T5555_BITRATE_SHIFT |
-				T5555_MODULATION_MANCHESTER   |
-				2 << T5555_MAXBLOCK_SHIFT,
-				0, 0, 0);
-
-	LED_D_OFF();
-	Dbprintf("Tag %s written with 0x%08x%08x\n", card ? "T55x7":"T5555",
-					(uint32_t)(id >> 32), (uint32_t)id);
+    int i, id_bit;
+    uint64_t id = EM410X_HEADER;
+    uint64_t rev_id = 0;	// reversed ID
+    int c_parity[4];	// column parity
+    int r_parity = 0;	// row parity
+    uint32_t clock = 0;
+
+    // Reverse ID bits given as parameter (for simpler operations)
+    for (i = 0; i < EM410X_ID_LENGTH; ++i) {
+        if (i < 32) {
+            rev_id = (rev_id << 1) | (id_lo & 1);
+            id_lo >>= 1;
+        } else {
+            rev_id = (rev_id << 1) | (id_hi & 1);
+            id_hi >>= 1;
+        }
+    }
+
+    for (i = 0; i < EM410X_ID_LENGTH; ++i) {
+        id_bit = rev_id & 1;
+
+        if (i % 4 == 0) {
+            // Don't write row parity bit at start of parsing
+            if (i)
+                id = (id << 1) | r_parity;
+            // Start counting parity for new row
+            r_parity = id_bit;
+        } else {
+            // Count row parity
+            r_parity ^= id_bit;
+        }
+
+        // First elements in column?
+        if (i < 4)
+            // Fill out first elements
+            c_parity[i] = id_bit;
+        else
+            // Count column parity
+            c_parity[i % 4] ^= id_bit;
+
+        // Insert ID bit
+        id = (id << 1) | id_bit;
+        rev_id >>= 1;
+    }
+
+    // Insert parity bit of last row
+    id = (id << 1) | r_parity;
+
+    // Fill out column parity at the end of tag
+    for (i = 0; i < 4; ++i)
+        id = (id << 1) | c_parity[i];
+
+    // Add stop bit
+    id <<= 1;
+
+    Dbprintf("Started writing %s tag ...", card ? "T55x7":"T5555");
+    LED_D_ON();
+
+    // Write EM410x ID
+    T55xxWriteBlock((uint32_t)(id >> 32), 1, 0, 0);
+    T55xxWriteBlock((uint32_t)id, 2, 0, 0);
+
+    // Config for EM410x (RF/64, Manchester, Maxblock=2)
+    if (card) {
+        // Clock rate is stored in bits 8-15 of the card value
+        clock = (card & 0xFF00) >> 8;
+        Dbprintf("Clock rate: %d", clock);
+        switch (clock)
+        {
+        case 32:
+            clock = T55x7_BITRATE_RF_32;
+            break;
+        case 16:
+            clock = T55x7_BITRATE_RF_16;
+            break;
+        case 0:
+            // A value of 0 is assumed to be 64 for backwards-compatibility
+            // Fall through...
+        case 64:
+            clock = T55x7_BITRATE_RF_64;
+            break;
+        default:
+            Dbprintf("Invalid clock rate: %d", clock);
+            return;
+        }
+
+        // Writing configuration for T55x7 tag
+        T55xxWriteBlock(clock	    |
+                        T55x7_MODULATION_MANCHESTER |
+                        2 << T55x7_MAXBLOCK_SHIFT,
+                        0, 0, 0);
+    }
+    else
+        // Writing configuration for T5555(Q5) tag
+        T55xxWriteBlock(0x1F << T5555_BITRATE_SHIFT |
+                        T5555_MODULATION_MANCHESTER   |
+                        2 << T5555_MAXBLOCK_SHIFT,
+                        0, 0, 0);
+
+    LED_D_OFF();
+    Dbprintf("Tag %s written with 0x%08x%08x\n", card ? "T55x7":"T5555",
+             (uint32_t)(id >> 32), (uint32_t)id);
 }
 
 // Clone Indala 64-bit tag by UID to T55x7
 void CopyIndala64toT55x7(int hi, int lo)
 {
 
-	//Program the 2 data blocks for supplied 64bit UID
-	// and the block 0 for Indala64 format
-	T55xxWriteBlock(hi,1,0,0);
-	T55xxWriteBlock(lo,2,0,0);
-	//Config for Indala (RF/32;PSK1 with RF/2;Maxblock=2)
-	T55xxWriteBlock(T55x7_BITRATE_RF_32    |
-			T55x7_MODULATION_PSK1 |
-			2 << T55x7_MAXBLOCK_SHIFT,
-			0, 0, 0);
-	//Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data)
-//	T5567WriteBlock(0x603E1042,0);
+    //Program the 2 data blocks for supplied 64bit UID
+    // and the block 0 for Indala64 format
+    T55xxWriteBlock(hi,1,0,0);
+    T55xxWriteBlock(lo,2,0,0);
+    //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=2)
+    T55xxWriteBlock(T55x7_BITRATE_RF_32    |
+                    T55x7_MODULATION_PSK1 |
+                    2 << T55x7_MAXBLOCK_SHIFT,
+                    0, 0, 0);
+    //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data)
+    //	T5567WriteBlock(0x603E1042,0);
 
-	DbpString("DONE!");
+    DbpString("DONE!");
 
-}	
+}
 
 void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int uid6, int uid7)
 {
 
-	//Program the 7 data blocks for supplied 224bit UID
-	// and the block 0 for Indala224 format
-	T55xxWriteBlock(uid1,1,0,0);
-	T55xxWriteBlock(uid2,2,0,0);
-	T55xxWriteBlock(uid3,3,0,0);
-	T55xxWriteBlock(uid4,4,0,0);
-	T55xxWriteBlock(uid5,5,0,0);
-	T55xxWriteBlock(uid6,6,0,0);
-	T55xxWriteBlock(uid7,7,0,0);
-	//Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7)
-	T55xxWriteBlock(T55x7_BITRATE_RF_32    |
-			T55x7_MODULATION_PSK1 |
-			7 << T55x7_MAXBLOCK_SHIFT,
-			0,0,0);
-	//Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
-//	T5567WriteBlock(0x603E10E2,0);
-
-	DbpString("DONE!");
+    //Program the 7 data blocks for supplied 224bit UID
+    // and the block 0 for Indala224 format
+    T55xxWriteBlock(uid1,1,0,0);
+    T55xxWriteBlock(uid2,2,0,0);
+    T55xxWriteBlock(uid3,3,0,0);
+    T55xxWriteBlock(uid4,4,0,0);
+    T55xxWriteBlock(uid5,5,0,0);
+    T55xxWriteBlock(uid6,6,0,0);
+    T55xxWriteBlock(uid7,7,0,0);
+    //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7)
+    T55xxWriteBlock(T55x7_BITRATE_RF_32    |
+                    T55x7_MODULATION_PSK1 |
+                    7 << T55x7_MAXBLOCK_SHIFT,
+                    0,0,0);
+    //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
+    //	T5567WriteBlock(0x603E10E2,0);
+
+    DbpString("DONE!");
 
 }
 
@@ -1384,261 +1375,261 @@ void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int
 #define max(x,y) ( x<y ? y:x)
 
 int DemodPCF7931(uint8_t **outBlocks) {
-	uint8_t BitStream[256];
-	uint8_t Blocks[8][16];
-	uint8_t *GraphBuffer = (uint8_t *)BigBuf;
-	int GraphTraceLen = sizeof(BigBuf);
-	int i, j, lastval, bitidx, half_switch;
-	int clock = 64;
-	int tolerance = clock / 8;
-	int pmc, block_done;
-	int lc, warnings = 0;
-	int num_blocks = 0;
-	int lmin=128, lmax=128;
-	uint8_t dir;
-	
-	AcquireRawAdcSamples125k(0);
-	
-	lmin = 64;
-	lmax = 192;
-	
-	i = 2;
-	
-	/* Find first local max/min */
-	if(GraphBuffer[1] > GraphBuffer[0]) {
-    while(i < GraphTraceLen) {
-      if( !(GraphBuffer[i] > GraphBuffer[i-1]) && GraphBuffer[i] > lmax)
-        break;
-      i++;
+    uint8_t BitStream[256];
+    uint8_t Blocks[8][16];
+    uint8_t *GraphBuffer = (uint8_t *)BigBuf;
+    int GraphTraceLen = sizeof(BigBuf);
+    int i, j, lastval, bitidx, half_switch;
+    int clock = 64;
+    int tolerance = clock / 8;
+    int pmc, block_done;
+    int lc, warnings = 0;
+    int num_blocks = 0;
+    int lmin=128, lmax=128;
+    uint8_t dir;
+
+    AcquireRawAdcSamples125k(0);
+
+    lmin = 64;
+    lmax = 192;
+
+    i = 2;
+
+    /* Find first local max/min */
+    if(GraphBuffer[1] > GraphBuffer[0]) {
+        while(i < GraphTraceLen) {
+            if( !(GraphBuffer[i] > GraphBuffer[i-1]) && GraphBuffer[i] > lmax)
+                break;
+            i++;
+        }
+        dir = 0;
+    }
+    else {
+        while(i < GraphTraceLen) {
+            if( !(GraphBuffer[i] < GraphBuffer[i-1]) && GraphBuffer[i] < lmin)
+                break;
+            i++;
+        }
+        dir = 1;
     }
-    dir = 0;
-	}
-	else {
-    while(i < GraphTraceLen) {
-      if( !(GraphBuffer[i] < GraphBuffer[i-1]) && GraphBuffer[i] < lmin)
-        break;
-      i++;
+
+    lastval = i++;
+    half_switch = 0;
+    pmc = 0;
+    block_done = 0;
+
+    for (bitidx = 0; i < GraphTraceLen; i++)
+    {
+        if ( (GraphBuffer[i-1] > GraphBuffer[i] && dir == 1 && GraphBuffer[i] > lmax) || (GraphBuffer[i-1] < GraphBuffer[i] && dir == 0 && GraphBuffer[i] < lmin))
+        {
+            lc = i - lastval;
+            lastval = i;
+
+            // Switch depending on lc length:
+            // Tolerance is 1/8 of clock rate (arbitrary)
+            if (abs(lc-clock/4) < tolerance) {
+                // 16T0
+                if((i - pmc) == lc) { /* 16T0 was previous one */
+                    /* It's a PMC ! */
+                    i += (128+127+16+32+33+16)-1;
+                    lastval = i;
+                    pmc = 0;
+                    block_done = 1;
+                }
+                else {
+                    pmc = i;
+                }
+            } else if (abs(lc-clock/2) < tolerance) {
+                // 32TO
+                if((i - pmc) == lc) { /* 16T0 was previous one */
+                    /* It's a PMC ! */
+                    i += (128+127+16+32+33)-1;
+                    lastval = i;
+                    pmc = 0;
+                    block_done = 1;
+                }
+                else if(half_switch == 1) {
+                    BitStream[bitidx++] = 0;
+                    half_switch = 0;
+                }
+                else
+                    half_switch++;
+            } else if (abs(lc-clock) < tolerance) {
+                // 64TO
+                BitStream[bitidx++] = 1;
+            } else {
+                // Error
+                warnings++;
+                if (warnings > 10)
+                {
+                    Dbprintf("Error: too many detection errors, aborting.");
+                    return 0;
+                }
+            }
+
+            if(block_done == 1) {
+                if(bitidx == 128) {
+                    for(j=0; j<16; j++) {
+                        Blocks[num_blocks][j] = 128*BitStream[j*8+7]+
+                                64*BitStream[j*8+6]+
+                                32*BitStream[j*8+5]+
+                                16*BitStream[j*8+4]+
+                                8*BitStream[j*8+3]+
+                                4*BitStream[j*8+2]+
+                                2*BitStream[j*8+1]+
+                                BitStream[j*8];
+                    }
+                    num_blocks++;
+                }
+                bitidx = 0;
+                block_done = 0;
+                half_switch = 0;
+            }
+            if(i < GraphTraceLen)
+            {
+                if (GraphBuffer[i-1] > GraphBuffer[i]) dir=0;
+                else dir = 1;
+            }
+        }
+        if(bitidx==255)
+            bitidx=0;
+        warnings = 0;
+        if(num_blocks == 4) break;
     }
-    dir = 1;
-	}
-	
-	lastval = i++;
-	half_switch = 0;
-	pmc = 0;
-	block_done = 0;
-	
-	for (bitidx = 0; i < GraphTraceLen; i++)
-	{
-	    if ( (GraphBuffer[i-1] > GraphBuffer[i] && dir == 1 && GraphBuffer[i] > lmax) || (GraphBuffer[i-1] < GraphBuffer[i] && dir == 0 && GraphBuffer[i] < lmin))
-	    {
-	      lc = i - lastval;
-	      lastval = i;
-	      
-	      // Switch depending on lc length:
-	      // Tolerance is 1/8 of clock rate (arbitrary)
-	      if (abs(lc-clock/4) < tolerance) {
-	        // 16T0
-	        if((i - pmc) == lc) { /* 16T0 was previous one */
-	          /* It's a PMC ! */
-	          i += (128+127+16+32+33+16)-1;
-	          lastval = i;
-	          pmc = 0;
-	          block_done = 1;
-	        }
-	        else {
-	          pmc = i;
-	        }
-	      } else if (abs(lc-clock/2) < tolerance) {
-	        // 32TO
-	        if((i - pmc) == lc) { /* 16T0 was previous one */
-	          /* It's a PMC ! */
-	          i += (128+127+16+32+33)-1;
-	          lastval = i;
-	          pmc = 0;
-	          block_done = 1;
-	        }
-	        else if(half_switch == 1) {
-	          BitStream[bitidx++] = 0;
-	          half_switch = 0;
-	        }
-	        else
-	          half_switch++;
-	      } else if (abs(lc-clock) < tolerance) {
-	        // 64TO
-	        BitStream[bitidx++] = 1;
-	      } else {
-	        // Error
-	        warnings++;
-	        if (warnings > 10)
-	        {
-	          Dbprintf("Error: too many detection errors, aborting.");
-	          return 0;
-	        }
-	      }
-	      
-	      if(block_done == 1) {
-	        if(bitidx == 128) {
-	          for(j=0; j<16; j++) {
-	            Blocks[num_blocks][j] = 128*BitStream[j*8+7]+
-	            64*BitStream[j*8+6]+
-	            32*BitStream[j*8+5]+
-	            16*BitStream[j*8+4]+
-	            8*BitStream[j*8+3]+
-	            4*BitStream[j*8+2]+
-	            2*BitStream[j*8+1]+
-	            BitStream[j*8];
-	          }
-	          num_blocks++;
-	        }
-	        bitidx = 0;
-	        block_done = 0;
-	        half_switch = 0;
-	      }
-	      if(i < GraphTraceLen)
-	      {
-		      if (GraphBuffer[i-1] > GraphBuffer[i]) dir=0;
-		      else dir = 1;	      	
-	      }
-	    }
-	    if(bitidx==255)
-	      bitidx=0;
-	    warnings = 0;
-	    if(num_blocks == 4) break;
-	}
-	memcpy(outBlocks, Blocks, 16*num_blocks);
-	return num_blocks;
+    memcpy(outBlocks, Blocks, 16*num_blocks);
+    return num_blocks;
 }
 
 int IsBlock0PCF7931(uint8_t *Block) {
-	// Assume RFU means 0 :)
-	if((memcmp(Block, "\x00\x00\x00\x00\x00\x00\x00\x01", 8) == 0) && memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) // PAC enabled
-    return 1;
-	if((memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) && Block[7] == 0) // PAC disabled, can it *really* happen ?
-    return 1;
-	return 0;
+    // Assume RFU means 0 :)
+    if((memcmp(Block, "\x00\x00\x00\x00\x00\x00\x00\x01", 8) == 0) && memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) // PAC enabled
+        return 1;
+    if((memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) && Block[7] == 0) // PAC disabled, can it *really* happen ?
+        return 1;
+    return 0;
 }
 
 int IsBlock1PCF7931(uint8_t *Block) {
-	// Assume RFU means 0 :)
-	if(Block[10] == 0 && Block[11] == 0 && Block[12] == 0 && Block[13] == 0)
-    if((Block[14] & 0x7f) <= 9 && Block[15] <= 9)
-      return 1;
-	
-	return 0;
+    // Assume RFU means 0 :)
+    if(Block[10] == 0 && Block[11] == 0 && Block[12] == 0 && Block[13] == 0)
+        if((Block[14] & 0x7f) <= 9 && Block[15] <= 9)
+            return 1;
+
+    return 0;
 }
 
 #define ALLOC 16
 
 void ReadPCF7931() {
-	uint8_t Blocks[8][17];
-	uint8_t tmpBlocks[4][16];
-	int i, j, ind, ind2, n;
-	int num_blocks = 0;
-	int max_blocks = 8;
-	int ident = 0;
-	int error = 0;
-	int tries = 0;
-	
-	memset(Blocks, 0, 8*17*sizeof(uint8_t));
-	
-	do {
-    memset(tmpBlocks, 0, 4*16*sizeof(uint8_t));
-    n = DemodPCF7931((uint8_t**)tmpBlocks);
-    if(!n)
-      error++;
-    if(error==10 && num_blocks == 0) {
-      Dbprintf("Error, no tag or bad tag");
-      return;
-    }
-    else if (tries==20 || error==10) {
-      Dbprintf("Error reading the tag");
-      Dbprintf("Here is the partial content");
-      goto end;
-    }
-    
-    for(i=0; i<n; i++)
-      Dbprintf("(dbg) %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
-               tmpBlocks[i][0], tmpBlocks[i][1], tmpBlocks[i][2], tmpBlocks[i][3], tmpBlocks[i][4], tmpBlocks[i][5], tmpBlocks[i][6], tmpBlocks[i][7],
-               tmpBlocks[i][8], tmpBlocks[i][9], tmpBlocks[i][10], tmpBlocks[i][11], tmpBlocks[i][12], tmpBlocks[i][13], tmpBlocks[i][14], tmpBlocks[i][15]);
-    if(!ident) {
-      for(i=0; i<n; i++) {
-        if(IsBlock0PCF7931(tmpBlocks[i])) {
-          // Found block 0 ?
-          if(i < n-1 && IsBlock1PCF7931(tmpBlocks[i+1])) {
-            // Found block 1!
-            // \o/
-            ident = 1;
-            memcpy(Blocks[0], tmpBlocks[i], 16);
-            Blocks[0][ALLOC] = 1;
-            memcpy(Blocks[1], tmpBlocks[i+1], 16);
-            Blocks[1][ALLOC] = 1;
-            max_blocks = max((Blocks[1][14] & 0x7f), Blocks[1][15]) + 1;
-            // Debug print
-            Dbprintf("(dbg) Max blocks: %d", max_blocks);
-            num_blocks = 2;
-            // Handle following blocks
-            for(j=i+2, ind2=2; j!=i; j++, ind2++, num_blocks++) {
-              if(j==n) j=0;
-              if(j==i) break;
-              memcpy(Blocks[ind2], tmpBlocks[j], 16);
-              Blocks[ind2][ALLOC] = 1;
-            }
-            break;
-          }
+    uint8_t Blocks[8][17];
+    uint8_t tmpBlocks[4][16];
+    int i, j, ind, ind2, n;
+    int num_blocks = 0;
+    int max_blocks = 8;
+    int ident = 0;
+    int error = 0;
+    int tries = 0;
+
+    memset(Blocks, 0, 8*17*sizeof(uint8_t));
+
+    do {
+        memset(tmpBlocks, 0, 4*16*sizeof(uint8_t));
+        n = DemodPCF7931((uint8_t**)tmpBlocks);
+        if(!n)
+            error++;
+        if(error==10 && num_blocks == 0) {
+            Dbprintf("Error, no tag or bad tag");
+            return;
         }
-      }
-    }
-    else {
-      for(i=0; i<n; i++) { // Look for identical block in known blocks
-        if(memcmp(tmpBlocks[i], "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00", 16)) { // Block is not full of 00
-          for(j=0; j<max_blocks; j++) {
-            if(Blocks[j][ALLOC] == 1 && !memcmp(tmpBlocks[i], Blocks[j], 16)) {
-              // Found an identical block
-              for(ind=i-1,ind2=j-1; ind >= 0; ind--,ind2--) {
-                if(ind2 < 0)
-                  ind2 = max_blocks;
-                if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found
-                  // Dbprintf("Tmp %d -> Block %d", ind, ind2);
-                  memcpy(Blocks[ind2], tmpBlocks[ind], 16);
-                  Blocks[ind2][ALLOC] = 1;
-                  num_blocks++;
-                  if(num_blocks == max_blocks) goto end;
+        else if (tries==20 || error==10) {
+            Dbprintf("Error reading the tag");
+            Dbprintf("Here is the partial content");
+            goto end;
+        }
+
+        for(i=0; i<n; i++)
+            Dbprintf("(dbg) %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
+                     tmpBlocks[i][0], tmpBlocks[i][1], tmpBlocks[i][2], tmpBlocks[i][3], tmpBlocks[i][4], tmpBlocks[i][5], tmpBlocks[i][6], tmpBlocks[i][7],
+                    tmpBlocks[i][8], tmpBlocks[i][9], tmpBlocks[i][10], tmpBlocks[i][11], tmpBlocks[i][12], tmpBlocks[i][13], tmpBlocks[i][14], tmpBlocks[i][15]);
+        if(!ident) {
+            for(i=0; i<n; i++) {
+                if(IsBlock0PCF7931(tmpBlocks[i])) {
+                    // Found block 0 ?
+                    if(i < n-1 && IsBlock1PCF7931(tmpBlocks[i+1])) {
+                        // Found block 1!
+                        // \o/
+                        ident = 1;
+                        memcpy(Blocks[0], tmpBlocks[i], 16);
+                        Blocks[0][ALLOC] = 1;
+                        memcpy(Blocks[1], tmpBlocks[i+1], 16);
+                        Blocks[1][ALLOC] = 1;
+                        max_blocks = max((Blocks[1][14] & 0x7f), Blocks[1][15]) + 1;
+                        // Debug print
+                        Dbprintf("(dbg) Max blocks: %d", max_blocks);
+                        num_blocks = 2;
+                        // Handle following blocks
+                        for(j=i+2, ind2=2; j!=i; j++, ind2++, num_blocks++) {
+                            if(j==n) j=0;
+                            if(j==i) break;
+                            memcpy(Blocks[ind2], tmpBlocks[j], 16);
+                            Blocks[ind2][ALLOC] = 1;
+                        }
+                        break;
+                    }
                 }
-              }
-              for(ind=i+1,ind2=j+1; ind < n; ind++,ind2++) {
-                if(ind2 > max_blocks)
-                  ind2 = 0;
-                if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found
-                  // Dbprintf("Tmp %d -> Block %d", ind, ind2);
-                  memcpy(Blocks[ind2], tmpBlocks[ind], 16);
-                  Blocks[ind2][ALLOC] = 1;
-                  num_blocks++;
-                  if(num_blocks == max_blocks) goto end;
+            }
+        }
+        else {
+            for(i=0; i<n; i++) { // Look for identical block in known blocks
+                if(memcmp(tmpBlocks[i], "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00", 16)) { // Block is not full of 00
+                    for(j=0; j<max_blocks; j++) {
+                        if(Blocks[j][ALLOC] == 1 && !memcmp(tmpBlocks[i], Blocks[j], 16)) {
+                            // Found an identical block
+                            for(ind=i-1,ind2=j-1; ind >= 0; ind--,ind2--) {
+                                if(ind2 < 0)
+                                    ind2 = max_blocks;
+                                if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found
+                                    // Dbprintf("Tmp %d -> Block %d", ind, ind2);
+                                    memcpy(Blocks[ind2], tmpBlocks[ind], 16);
+                                    Blocks[ind2][ALLOC] = 1;
+                                    num_blocks++;
+                                    if(num_blocks == max_blocks) goto end;
+                                }
+                            }
+                            for(ind=i+1,ind2=j+1; ind < n; ind++,ind2++) {
+                                if(ind2 > max_blocks)
+                                    ind2 = 0;
+                                if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found
+                                    // Dbprintf("Tmp %d -> Block %d", ind, ind2);
+                                    memcpy(Blocks[ind2], tmpBlocks[ind], 16);
+                                    Blocks[ind2][ALLOC] = 1;
+                                    num_blocks++;
+                                    if(num_blocks == max_blocks) goto end;
+                                }
+                            }
+                        }
+                    }
                 }
-              }
             }
-          }
         }
-      }
-    }
-    tries++;
-    if (BUTTON_PRESS()) return;
-	} while (num_blocks != max_blocks);
+        tries++;
+        if (BUTTON_PRESS()) return;
+    } while (num_blocks != max_blocks);
 end:
-	Dbprintf("-----------------------------------------");
-	Dbprintf("Memory content:");
-	Dbprintf("-----------------------------------------");
-	for(i=0; i<max_blocks; i++) {
-    if(Blocks[i][ALLOC]==1)
-      Dbprintf("%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
-               Blocks[i][0], Blocks[i][1], Blocks[i][2], Blocks[i][3], Blocks[i][4], Blocks[i][5], Blocks[i][6], Blocks[i][7],
-               Blocks[i][8], Blocks[i][9], Blocks[i][10], Blocks[i][11], Blocks[i][12], Blocks[i][13], Blocks[i][14], Blocks[i][15]);
-    else
-      Dbprintf("<missing block %d>", i);
-	}
-	Dbprintf("-----------------------------------------");
-	
-	return ;
+    Dbprintf("-----------------------------------------");
+    Dbprintf("Memory content:");
+    Dbprintf("-----------------------------------------");
+    for(i=0; i<max_blocks; i++) {
+        if(Blocks[i][ALLOC]==1)
+            Dbprintf("%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
+                     Blocks[i][0], Blocks[i][1], Blocks[i][2], Blocks[i][3], Blocks[i][4], Blocks[i][5], Blocks[i][6], Blocks[i][7],
+                    Blocks[i][8], Blocks[i][9], Blocks[i][10], Blocks[i][11], Blocks[i][12], Blocks[i][13], Blocks[i][14], Blocks[i][15]);
+        else
+            Dbprintf("<missing block %d>", i);
+    }
+    Dbprintf("-----------------------------------------");
+
+    return ;
 }
 
 
@@ -1662,20 +1653,20 @@ uint8_t * fwd_write_ptr; //forwardlink bit pointer
 //====================================================================
 //--------------------------------------------------------------------
 uint8_t Prepare_Cmd( uint8_t cmd ) {
-  //--------------------------------------------------------------------
-  
-  *forward_ptr++ = 0; //start bit
-  *forward_ptr++ = 0; //second pause for 4050 code
-  
-  *forward_ptr++ = cmd;
-  cmd >>= 1;
-  *forward_ptr++ = cmd;
-  cmd >>= 1;
-  *forward_ptr++ = cmd;
-  cmd >>= 1;
-  *forward_ptr++ = cmd;
-  
-  return 6; //return number of emited bits
+    //--------------------------------------------------------------------
+
+    *forward_ptr++ = 0; //start bit
+    *forward_ptr++ = 0; //second pause for 4050 code
+
+    *forward_ptr++ = cmd;
+    cmd >>= 1;
+    *forward_ptr++ = cmd;
+    cmd >>= 1;
+    *forward_ptr++ = cmd;
+    cmd >>= 1;
+    *forward_ptr++ = cmd;
+
+    return 6; //return number of emited bits
 }
 
 //====================================================================
@@ -1685,21 +1676,21 @@ uint8_t Prepare_Cmd( uint8_t cmd ) {
 
 //--------------------------------------------------------------------
 uint8_t Prepare_Addr( uint8_t addr ) {
-  //--------------------------------------------------------------------
-  
-  register uint8_t line_parity;
-  
-  uint8_t i;
-  line_parity = 0;
-  for(i=0;i<6;i++) {
-    *forward_ptr++ = addr;
-    line_parity ^= addr;
-    addr >>= 1;
-  }
-  
-  *forward_ptr++ = (line_parity & 1);
-  
-  return 7; //return number of emited bits
+    //--------------------------------------------------------------------
+
+    register uint8_t line_parity;
+
+    uint8_t i;
+    line_parity = 0;
+    for(i=0;i<6;i++) {
+        *forward_ptr++ = addr;
+        line_parity ^= addr;
+        addr >>= 1;
+    }
+
+    *forward_ptr++ = (line_parity & 1);
+
+    return 7; //return number of emited bits
 }
 
 //====================================================================
@@ -1709,36 +1700,36 @@ uint8_t Prepare_Addr( uint8_t addr ) {
 
 //--------------------------------------------------------------------
 uint8_t Prepare_Data( uint16_t data_low, uint16_t data_hi) {
-  //--------------------------------------------------------------------
-  
-  register uint8_t line_parity;
-  register uint8_t column_parity;
-  register uint8_t i, j;
-  register uint16_t data;
-  
-  data = data_low;
-  column_parity = 0;
-  
-  for(i=0; i<4; i++) {
-    line_parity = 0;
+    //--------------------------------------------------------------------
+
+    register uint8_t line_parity;
+    register uint8_t column_parity;
+    register uint8_t i, j;
+    register uint16_t data;
+
+    data = data_low;
+    column_parity = 0;
+
+    for(i=0; i<4; i++) {
+        line_parity = 0;
+        for(j=0; j<8; j++) {
+            line_parity ^= data;
+            column_parity ^= (data & 1) << j;
+            *forward_ptr++ = data;
+            data >>= 1;
+        }
+        *forward_ptr++ = line_parity;
+        if(i == 1)
+            data = data_hi;
+    }
+
     for(j=0; j<8; j++) {
-      line_parity ^= data;
-      column_parity ^= (data & 1) << j;
-      *forward_ptr++ = data;
-      data >>= 1;
+        *forward_ptr++ = column_parity;
+        column_parity >>= 1;
     }
-    *forward_ptr++ = line_parity;
-    if(i == 1)
-      data = data_hi;
-  }
-  
-  for(j=0; j<8; j++) {
-    *forward_ptr++ = column_parity;
-    column_parity >>= 1;
-  }
-  *forward_ptr = 0;
-  
-  return 45; //return number of emited bits
+    *forward_ptr = 0;
+
+    return 45; //return number of emited bits
 }
 
 //====================================================================
@@ -1747,115 +1738,115 @@ uint8_t Prepare_Data( uint16_t data_low, uint16_t data_hi) {
 // fwd_bit_count set with number of bits to be sent
 //====================================================================
 void SendForward(uint8_t fwd_bit_count) {
-  
-  fwd_write_ptr = forwardLink_data;
-  fwd_bit_sz = fwd_bit_count;
-  
-  LED_D_ON();
-  
-  //Field on
-  FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-  FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-  
-  // Give it a bit of time for the resonant antenna to settle.
-  // And for the tag to fully power up
-  SpinDelay(150);
-  
-  // force 1st mod pulse (start gap must be longer for 4305)
-  fwd_bit_sz--; //prepare next bit modulation
-  fwd_write_ptr++;
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-  SpinDelayUs(55*8); //55 cycles off (8us each)for 4305
-  FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
-  SpinDelayUs(16*8); //16 cycles on (8us each)
-  
-  // now start writting
-  while(fwd_bit_sz-- > 0) { //prepare next bit modulation
-    if(((*fwd_write_ptr++) & 1) == 1)
-      SpinDelayUs(32*8); //32 cycles at 125Khz (8us each)
-    else {
-      //These timings work for 4469/4269/4305 (with the 55*8 above)
-      FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-      SpinDelayUs(23*8); //16-4 cycles off (8us each)
-      FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-      FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
-      SpinDelayUs(9*8); //16 cycles on (8us each)
+
+    fwd_write_ptr = forwardLink_data;
+    fwd_bit_sz = fwd_bit_count;
+
+    LED_D_ON();
+
+    //Field on
+    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+
+    // Give it a bit of time for the resonant antenna to settle.
+    // And for the tag to fully power up
+    SpinDelay(150);
+
+    // force 1st mod pulse (start gap must be longer for 4305)
+    fwd_bit_sz--; //prepare next bit modulation
+    fwd_write_ptr++;
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+    SpinDelayUs(55*8); //55 cycles off (8us each)for 4305
+    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
+    SpinDelayUs(16*8); //16 cycles on (8us each)
+
+    // now start writting
+    while(fwd_bit_sz-- > 0) { //prepare next bit modulation
+        if(((*fwd_write_ptr++) & 1) == 1)
+            SpinDelayUs(32*8); //32 cycles at 125Khz (8us each)
+        else {
+            //These timings work for 4469/4269/4305 (with the 55*8 above)
+            FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+            SpinDelayUs(23*8); //16-4 cycles off (8us each)
+            FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+            FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
+            SpinDelayUs(9*8); //16 cycles on (8us each)
+        }
     }
-  }
 }
 
 void EM4xLogin(uint32_t Password) {
-  
-  uint8_t fwd_bit_count;
-  
-  forward_ptr = forwardLink_data;
-  fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN );
-  fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 );
-  
-  SendForward(fwd_bit_count);
-  
-  //Wait for command to complete
-  SpinDelay(20);
-  
+
+    uint8_t fwd_bit_count;
+
+    forward_ptr = forwardLink_data;
+    fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN );
+    fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 );
+
+    SendForward(fwd_bit_count);
+
+    //Wait for command to complete
+    SpinDelay(20);
+
 }
 
 void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
-  
-  uint8_t fwd_bit_count;
-  uint8_t *dest = (uint8_t *)BigBuf;
-  int m=0, i=0;
-  
-  //If password mode do login
-  if (PwdMode == 1) EM4xLogin(Pwd);
-  
-  forward_ptr = forwardLink_data;
-  fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
-  fwd_bit_count += Prepare_Addr( Address );
-  
-  m = sizeof(BigBuf);
-  // Clear destination buffer before sending the command
-  memset(dest, 128, m);
-  // Connect the A/D to the peak-detected low-frequency path.
-  SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-  // Now set up the SSC to get the ADC samples that are now streaming at us.
-  FpgaSetupSsc();
-  
-  SendForward(fwd_bit_count);
-  
-  // Now do the acquisition
-  i = 0;
-  for(;;) {
-    if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
-      AT91C_BASE_SSC->SSC_THR = 0x43;
-    }
-    if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
-      dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-      i++;
-      if (i >= m) break;
+
+    uint8_t fwd_bit_count;
+    uint8_t *dest = (uint8_t *)BigBuf;
+    int m=0, i=0;
+
+    //If password mode do login
+    if (PwdMode == 1) EM4xLogin(Pwd);
+
+    forward_ptr = forwardLink_data;
+    fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
+    fwd_bit_count += Prepare_Addr( Address );
+
+    m = sizeof(BigBuf);
+    // Clear destination buffer before sending the command
+    memset(dest, 128, m);
+    // Connect the A/D to the peak-detected low-frequency path.
+    SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
+    // Now set up the SSC to get the ADC samples that are now streaming at us.
+    FpgaSetupSsc();
+
+    SendForward(fwd_bit_count);
+
+    // Now do the acquisition
+    i = 0;
+    for(;;) {
+        if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
+            AT91C_BASE_SSC->SSC_THR = 0x43;
+        }
+        if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
+            dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
+            i++;
+            if (i >= m) break;
+        }
     }
-  }
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-  LED_D_OFF();
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+    LED_D_OFF();
 }
 
 void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
-  
-  uint8_t fwd_bit_count;
-  
-  //If password mode do login
-  if (PwdMode == 1) EM4xLogin(Pwd);
-  
-  forward_ptr = forwardLink_data;
-  fwd_bit_count = Prepare_Cmd( FWD_CMD_WRITE );
-  fwd_bit_count += Prepare_Addr( Address );
-  fwd_bit_count += Prepare_Data( Data&0xFFFF, Data>>16 );
-  
-  SendForward(fwd_bit_count);
-  
-  //Wait for write to complete
-  SpinDelay(20);
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-  LED_D_OFF();
+
+    uint8_t fwd_bit_count;
+
+    //If password mode do login
+    if (PwdMode == 1) EM4xLogin(Pwd);
+
+    forward_ptr = forwardLink_data;
+    fwd_bit_count = Prepare_Cmd( FWD_CMD_WRITE );
+    fwd_bit_count += Prepare_Addr( Address );
+    fwd_bit_count += Prepare_Data( Data&0xFFFF, Data>>16 );
+
+    SendForward(fwd_bit_count);
+
+    //Wait for write to complete
+    SpinDelay(20);
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+    LED_D_OFF();
 }