X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/6f5dd6010ec48f56724029a414db1ee3594ab810..3c05723ee224b72138884c150b78c4c45ae841ba:/client/proxmark3.c diff --git a/client/proxmark3.c b/client/proxmark3.c index 3b30b3cb..d2bb2011 100644 --- a/client/proxmark3.c +++ b/client/proxmark3.c @@ -48,6 +48,11 @@ void SendCommand(UsbCommand *c) { return; } + /** + The while-loop below causes hangups at times, when the pm3 unit is unresponsive + or disconnected. The main console thread is alive, but comm thread just spins here. + Not good.../holiman + **/ while(txcmd_pending); txcmd = *c; txcmd_pending = true; @@ -62,21 +67,6 @@ struct main_loop_arg { char *script_cmds_file; }; -//static void *usb_receiver(void *targ) { -// struct receiver_arg *arg = (struct receiver_arg*)targ; -// UsbCommand cmdbuf; -// -// while (arg->run) { -// if (ReceiveCommandPoll(&cmdbuf)) { -// UsbCommandReceived(&cmdbuf); -// fflush(NULL); -// } -// } -// -// pthread_exit(NULL); -// return NULL; -//} - byte_t rx[0x1000000]; byte_t* prx = rx; @@ -207,25 +197,14 @@ static void *main_loop(void *targ) { return NULL; } -//static void dumpHelp(char *parent, ...) -//{ -// printf("## %s\n\n", parent); -// CommandReceived(parent); -// -// printf("\n"); -//} - -static void dumpAllHelp() +static void dumpAllHelp(int markdown) { - offline=3; - printf("\n# Proxmark3 command dump\n\n"); - printf("Some commands are available only if a Proxmark is actually connected.\n"); + printf("\n%sProxmark3 command dump%s\n\n",markdown?"# ":"",markdown?"":"\n======================"); + printf("Some commands are available only if a Proxmark is actually connected.%s\n",markdown?" ":""); printf("Check column \"offline\" for their availability.\n"); printf("\n"); command_t *cmds = getTopLevelCommandTable(); - - dumpCommandsRecursive(cmds); - + dumpCommandsRecursive(cmds, markdown); } int main(int argc, char* argv[]) { @@ -234,17 +213,22 @@ int main(int argc, char* argv[]) { if (argc < 2) { printf("syntax: %s \n\n",argv[0]); printf("\tLinux example:'%s /dev/ttyACM0'\n\n", argv[0]); - printf("help: %s -h\n\n", argv[0]); - printf("\tDump all interactive help at once\n"); + printf("help: %s -h\n\n", argv[0]); + printf("\tDump all interactive help at once\n"); + printf("markdown: %s -m\n\n", argv[0]); + printf("\tDump all interactive help at once in markdown syntax\n"); return 1; } - - if (strcmp(argv[1], "-h") == 0) { - printf("syntax: %s \n\n",argv[0]); - printf("\tLinux example:'%s /dev/ttyACM0'\n\n", argv[0]); - dumpAllHelp(); - return 0; - } + if (strcmp(argv[1], "-h") == 0) { + printf("syntax: %s \n\n",argv[0]); + printf("\tLinux example:'%s /dev/ttyACM0'\n\n", argv[0]); + dumpAllHelp(0); + return 0; + } + if (strcmp(argv[1], "-m") == 0) { + dumpAllHelp(1); + return 0; + } // Make sure to initialize struct main_loop_arg marg = { .usb_present = 0, @@ -252,17 +236,6 @@ int main(int argc, char* argv[]) { }; pthread_t main_loop_t; -/* - usb_init(); - if (!OpenProxmark(1)) { - fprintf(stderr,"PROXMARK3: NOT FOUND!\n"); - marg.usb_present = 0; - offline = 1; - } else { - marg.usb_present = 1; - offline = 0; - } -*/ sp = uart_open(argv[1]); if (sp == INVALID_SERIAL_PORT) { @@ -303,10 +276,6 @@ int main(int argc, char* argv[]) { pthread_join(main_loop_t, NULL); -// if (marg.usb_present == 1) { -// CloseProxmark(); -// } - // Clean up the port uart_close(sp);