X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/72acba78844edd59c574d9c281c459eda0d9c1d5..8de6b69d1ef8f20c9cd7baa79590ff7a61c7254f:/fpga/fpga.v?ds=inline diff --git a/fpga/fpga.v b/fpga/fpga.v index 2fb0ed78..d2d84a32 100644 --- a/fpga/fpga.v +++ b/fpga/fpga.v @@ -1,209 +1,218 @@ -//----------------------------------------------------------------------------- -// The FPGA is responsible for interfacing between the A/D, the coil drivers, -// and the ARM. In the low-frequency modes it passes the data straight -// through, so that the ARM gets raw A/D samples over the SSP. In the high- -// frequency modes, the FPGA might perform some demodulation first, to -// reduce the amount of data that we must send to the ARM. -// -// I am not really an FPGA/ASIC designer, so I am sure that a lot of this -// could be improved. -// -// Jonathan Westhues, March 2006 -// Added ISO14443-A support by Gerhard de Koning Gans, April 2008 -//----------------------------------------------------------------------------- - -`include "lo_read.v" -`include "lo_passthru.v" -`include "lo_simulate.v" -`include "hi_read_tx.v" -`include "hi_read_rx_xcorr.v" -`include "hi_simulate.v" -`include "hi_iso14443a.v" -`include "util.v" - -module fpga( - spcki, miso, mosi, ncs, - pck0i, ck_1356meg, ck_1356megb, - pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4, - adc_d, adc_clk, adc_noe, - ssp_frame, ssp_din, ssp_dout, ssp_clk, - cross_hi, cross_lo, - dbg -); - input spcki, mosi, ncs; - output miso; - input pck0i, ck_1356meg, ck_1356megb; - output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4; - input [7:0] adc_d; - output adc_clk, adc_noe; - input ssp_dout; - output ssp_frame, ssp_din, ssp_clk; - input cross_hi, cross_lo; - output dbg; - -//assign pck0 = pck0i; - IBUFG #(.IOSTANDARD("DEFAULT") ) pck0b( - .O(pck0), - .I(pck0i) - ); -//assign spck = spcki; - IBUFG #(.IOSTANDARD("DEFAULT") ) spckb( - .O(spck), - .I(spcki) - ); -//----------------------------------------------------------------------------- -// The SPI receiver. This sets up the configuration word, which the rest of -// the logic looks at to determine how to connect the A/D and the coil -// drivers (i.e., which section gets it). Also assign some symbolic names -// to the configuration bits, for use below. -//----------------------------------------------------------------------------- - -reg [15:0] shift_reg; -reg [7:0] divisor; -reg [7:0] conf_word; - -// We switch modes between transmitting to the 13.56 MHz tag and receiving -// from it, which means that we must make sure that we can do so without -// glitching, or else we will glitch the transmitted carrier. -always @(posedge ncs) -begin - case(shift_reg[15:12]) - 4'b0001: conf_word <= shift_reg[7:0]; - 4'b0010: divisor <= shift_reg[7:0]; - endcase -end - -always @(posedge spck) -begin - if(~ncs) - begin - shift_reg[15:1] <= shift_reg[14:0]; - shift_reg[0] <= mosi; - end -end - -wire [2:0] major_mode; -assign major_mode = conf_word[7:5]; - -// For the low-frequency configuration: -wire lo_is_125khz; -assign lo_is_125khz = conf_word[3]; - -// For the high-frequency transmit configuration: modulation depth, either -// 100% (just quite driving antenna, steady LOW), or shallower (tri-state -// some fraction of the buffers) -wire hi_read_tx_shallow_modulation; -assign hi_read_tx_shallow_modulation = conf_word[0]; - -// For the high-frequency receive correlator: frequency against which to -// correlate. -wire hi_read_rx_xcorr_848; -assign hi_read_rx_xcorr_848 = conf_word[0]; -// and whether to drive the coil (reader) or just short it (snooper) -wire hi_read_rx_xcorr_snoop; -assign hi_read_rx_xcorr_snoop = conf_word[1]; - -// For the high-frequency simulated tag: what kind of modulation to use. -wire [2:0] hi_simulate_mod_type; -assign hi_simulate_mod_type = conf_word[2:0]; - -//----------------------------------------------------------------------------- -// And then we instantiate the modules corresponding to each of the FPGA's -// major modes, and use muxes to connect the outputs of the active mode to -// the output pins. -//----------------------------------------------------------------------------- - -lo_read lr( - pck0, ck_1356meg, ck_1356megb, - lr_pwr_lo, lr_pwr_hi, lr_pwr_oe1, lr_pwr_oe2, lr_pwr_oe3, lr_pwr_oe4, - adc_d, lr_adc_clk, - lr_ssp_frame, lr_ssp_din, ssp_dout, lr_ssp_clk, - cross_hi, cross_lo, - lr_dbg, - lo_is_125khz, divisor -); - -lo_passthru lp( - pck0, ck_1356meg, ck_1356megb, - lp_pwr_lo, lp_pwr_hi, lp_pwr_oe1, lp_pwr_oe2, lp_pwr_oe3, lp_pwr_oe4, - adc_d, lp_adc_clk, - lp_ssp_frame, lp_ssp_din, ssp_dout, lp_ssp_clk, - cross_hi, cross_lo, - lp_dbg -); - -lo_simulate ls( - pck0, ck_1356meg, ck_1356megb, - ls_pwr_lo, ls_pwr_hi, ls_pwr_oe1, ls_pwr_oe2, ls_pwr_oe3, ls_pwr_oe4, - adc_d, ls_adc_clk, - ls_ssp_frame, ls_ssp_din, ssp_dout, ls_ssp_clk, - cross_hi, cross_lo, - ls_dbg -); - -hi_read_tx ht( - pck0, ck_1356meg, ck_1356megb, - ht_pwr_lo, ht_pwr_hi, ht_pwr_oe1, ht_pwr_oe2, ht_pwr_oe3, ht_pwr_oe4, - adc_d, ht_adc_clk, - ht_ssp_frame, ht_ssp_din, ssp_dout, ht_ssp_clk, - cross_hi, cross_lo, - ht_dbg, - hi_read_tx_shallow_modulation -); - -hi_read_rx_xcorr hrxc( - pck0, ck_1356meg, ck_1356megb, - hrxc_pwr_lo, hrxc_pwr_hi, hrxc_pwr_oe1, hrxc_pwr_oe2, hrxc_pwr_oe3, hrxc_pwr_oe4, - adc_d, hrxc_adc_clk, - hrxc_ssp_frame, hrxc_ssp_din, ssp_dout, hrxc_ssp_clk, - cross_hi, cross_lo, - hrxc_dbg, - hi_read_rx_xcorr_848, hi_read_rx_xcorr_snoop -); - -hi_simulate hs( - pck0, ck_1356meg, ck_1356megb, - hs_pwr_lo, hs_pwr_hi, hs_pwr_oe1, hs_pwr_oe2, hs_pwr_oe3, hs_pwr_oe4, - adc_d, hs_adc_clk, - hs_ssp_frame, hs_ssp_din, ssp_dout, hs_ssp_clk, - cross_hi, cross_lo, - hs_dbg, - hi_simulate_mod_type -); - -hi_iso14443a hisn( - pck0, ck_1356meg, ck_1356megb, - hisn_pwr_lo, hisn_pwr_hi, hisn_pwr_oe1, hisn_pwr_oe2, hisn_pwr_oe3, hisn_pwr_oe4, - adc_d, hisn_adc_clk, - hisn_ssp_frame, hisn_ssp_din, ssp_dout, hisn_ssp_clk, - cross_hi, cross_lo, - hisn_dbg, - hi_simulate_mod_type -); - -// Major modes: -// 000 -- LF reader (generic) -// 001 -- LF simulated tag (generic) -// 010 -- HF reader, transmitting to tag; modulation depth selectable -// 011 -- HF reader, receiving from tag, correlating as it goes; frequency selectable -// 100 -- HF simulated tag -// 101 -- HF ISO14443-A -// 110 -- LF passthrough -// 111 -- everything off - -mux8 mux_ssp_clk (major_mode, ssp_clk, lr_ssp_clk, ls_ssp_clk, ht_ssp_clk, hrxc_ssp_clk, hs_ssp_clk, hisn_ssp_clk, lp_ssp_clk, 1'b0); -mux8 mux_ssp_din (major_mode, ssp_din, lr_ssp_din, ls_ssp_din, ht_ssp_din, hrxc_ssp_din, hs_ssp_din, hisn_ssp_din, lp_ssp_din, 1'b0); -mux8 mux_ssp_frame (major_mode, ssp_frame, lr_ssp_frame, ls_ssp_frame, ht_ssp_frame, hrxc_ssp_frame, hs_ssp_frame, hisn_ssp_frame, lp_ssp_frame, 1'b0); -mux8 mux_pwr_oe1 (major_mode, pwr_oe1, lr_pwr_oe1, ls_pwr_oe1, ht_pwr_oe1, hrxc_pwr_oe1, hs_pwr_oe1, hisn_pwr_oe1, lp_pwr_oe1, 1'b0); -mux8 mux_pwr_oe2 (major_mode, pwr_oe2, lr_pwr_oe2, ls_pwr_oe2, ht_pwr_oe2, hrxc_pwr_oe2, hs_pwr_oe2, hisn_pwr_oe2, lp_pwr_oe2, 1'b0); -mux8 mux_pwr_oe3 (major_mode, pwr_oe3, lr_pwr_oe3, ls_pwr_oe3, ht_pwr_oe3, hrxc_pwr_oe3, hs_pwr_oe3, hisn_pwr_oe3, lp_pwr_oe3, 1'b0); -mux8 mux_pwr_oe4 (major_mode, pwr_oe4, lr_pwr_oe4, ls_pwr_oe4, ht_pwr_oe4, hrxc_pwr_oe4, hs_pwr_oe4, hisn_pwr_oe4, lp_pwr_oe4, 1'b0); -mux8 mux_pwr_lo (major_mode, pwr_lo, lr_pwr_lo, ls_pwr_lo, ht_pwr_lo, hrxc_pwr_lo, hs_pwr_lo, hisn_pwr_lo, lp_pwr_lo, 1'b0); -mux8 mux_pwr_hi (major_mode, pwr_hi, lr_pwr_hi, ls_pwr_hi, ht_pwr_hi, hrxc_pwr_hi, hs_pwr_hi, hisn_pwr_hi, lp_pwr_hi, 1'b0); -mux8 mux_adc_clk (major_mode, adc_clk, lr_adc_clk, ls_adc_clk, ht_adc_clk, hrxc_adc_clk, hs_adc_clk, hisn_adc_clk, lp_adc_clk, 1'b0); -mux8 mux_dbg (major_mode, dbg, lr_dbg, ls_dbg, ht_dbg, hrxc_dbg, hs_dbg, hisn_dbg, lp_dbg, 1'b0); - -// In all modes, let the ADC's outputs be enabled. -assign adc_noe = 1'b0; - -endmodule +//----------------------------------------------------------------------------- +// The FPGA is responsible for interfacing between the A/D, the coil drivers, +// and the ARM. In the low-frequency modes it passes the data straight +// through, so that the ARM gets raw A/D samples over the SSP. In the high- +// frequency modes, the FPGA might perform some demodulation first, to +// reduce the amount of data that we must send to the ARM. +// +// I am not really an FPGA/ASIC designer, so I am sure that a lot of this +// could be improved. +// +// Jonathan Westhues, March 2006 +// Added ISO14443-A support by Gerhard de Koning Gans, April 2008 +//----------------------------------------------------------------------------- + +`include "lo_read.v" +`include "lo_passthru.v" +`include "lo_edge_detect.v" +`include "hi_read_tx.v" +`include "hi_read_rx_xcorr.v" +`include "hi_simulate.v" +`include "hi_iso14443a.v" +`include "util.v" + +module fpga( + spcki, miso, mosi, ncs, + pck0i, ck_1356meg, ck_1356megb, + pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4, + adc_d, adc_clk, adc_noe, + ssp_frame, ssp_din, ssp_dout, ssp_clk, + cross_hi, cross_lo, + dbg +); + input spcki, mosi, ncs; + output miso; + input pck0i, ck_1356meg, ck_1356megb; + output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4; + input [7:0] adc_d; + output adc_clk, adc_noe; + input ssp_dout; + output ssp_frame, ssp_din, ssp_clk; + input cross_hi, cross_lo; + output dbg; + +//assign pck0 = pck0i; + IBUFG #(.IOSTANDARD("DEFAULT") ) pck0b( + .O(pck0), + .I(pck0i) + ); +//assign spck = spcki; + IBUFG #(.IOSTANDARD("DEFAULT") ) spckb( + .O(spck), + .I(spcki) + ); +//----------------------------------------------------------------------------- +// The SPI receiver. This sets up the configuration word, which the rest of +// the logic looks at to determine how to connect the A/D and the coil +// drivers (i.e., which section gets it). Also assign some symbolic names +// to the configuration bits, for use below. +//----------------------------------------------------------------------------- + +reg [15:0] shift_reg; +reg [7:0] divisor; +reg [7:0] conf_word; + +// We switch modes between transmitting to the 13.56 MHz tag and receiving +// from it, which means that we must make sure that we can do so without +// glitching, or else we will glitch the transmitted carrier. +always @(posedge ncs) +begin + case(shift_reg[15:12]) + 4'b0001: conf_word <= shift_reg[7:0]; + 4'b0010: divisor <= shift_reg[7:0]; + endcase +end + +always @(posedge spck) +begin + if(~ncs) + begin + shift_reg[15:1] <= shift_reg[14:0]; + shift_reg[0] <= mosi; + end +end + +wire [2:0] major_mode; +assign major_mode = conf_word[7:5]; + +// For the low-frequency configuration: +wire lo_is_125khz; +assign lo_is_125khz = conf_word[3]; + +// For the high-frequency transmit configuration: modulation depth, either +// 100% (just quite driving antenna, steady LOW), or shallower (tri-state +// some fraction of the buffers) +wire hi_read_tx_shallow_modulation; +assign hi_read_tx_shallow_modulation = conf_word[0]; + +// For the high-frequency receive correlator: frequency against which to +// correlate. +wire hi_read_rx_xcorr_848; +assign hi_read_rx_xcorr_848 = conf_word[0]; +// and whether to drive the coil (reader) or just short it (snooper) +wire hi_read_rx_xcorr_snoop; +assign hi_read_rx_xcorr_snoop = conf_word[1]; + +// Divide the expected subcarrier frequency for hi_read_rx_xcorr by 4 +wire hi_read_rx_xcorr_quarter; +assign hi_read_rx_xcorr_quarter = conf_word[2]; + +// For the high-frequency simulated tag: what kind of modulation to use. +wire [2:0] hi_simulate_mod_type; +assign hi_simulate_mod_type = conf_word[2:0]; + +// For the high-frequency simulated tag: what kind of modulation to use. +wire lf_field; +assign lf_field = conf_word[0]; + +//----------------------------------------------------------------------------- +// And then we instantiate the modules corresponding to each of the FPGA's +// major modes, and use muxes to connect the outputs of the active mode to +// the output pins. +//----------------------------------------------------------------------------- + +lo_read lr( + pck0, ck_1356meg, ck_1356megb, + lr_pwr_lo, lr_pwr_hi, lr_pwr_oe1, lr_pwr_oe2, lr_pwr_oe3, lr_pwr_oe4, + adc_d, lr_adc_clk, + lr_ssp_frame, lr_ssp_din, ssp_dout, lr_ssp_clk, + cross_hi, cross_lo, + lr_dbg, + lo_is_125khz, divisor +); + +lo_passthru lp( + pck0, ck_1356meg, ck_1356megb, + lp_pwr_lo, lp_pwr_hi, lp_pwr_oe1, lp_pwr_oe2, lp_pwr_oe3, lp_pwr_oe4, + adc_d, lp_adc_clk, + lp_ssp_frame, lp_ssp_din, ssp_dout, lp_ssp_clk, + cross_hi, cross_lo, + lp_dbg, divisor +); + +lo_edge_detect ls( + pck0, ck_1356meg, ck_1356megb, + ls_pwr_lo, ls_pwr_hi, ls_pwr_oe1, ls_pwr_oe2, ls_pwr_oe3, ls_pwr_oe4, + adc_d, ls_adc_clk, + ls_ssp_frame, ls_ssp_din, ssp_dout, ls_ssp_clk, + cross_hi, cross_lo, + ls_dbg, divisor, + lf_field +); + +hi_read_tx ht( + pck0, ck_1356meg, ck_1356megb, + ht_pwr_lo, ht_pwr_hi, ht_pwr_oe1, ht_pwr_oe2, ht_pwr_oe3, ht_pwr_oe4, + adc_d, ht_adc_clk, + ht_ssp_frame, ht_ssp_din, ssp_dout, ht_ssp_clk, + cross_hi, cross_lo, + ht_dbg, + hi_read_tx_shallow_modulation +); + +hi_read_rx_xcorr hrxc( + pck0, ck_1356meg, ck_1356megb, + hrxc_pwr_lo, hrxc_pwr_hi, hrxc_pwr_oe1, hrxc_pwr_oe2, hrxc_pwr_oe3, hrxc_pwr_oe4, + adc_d, hrxc_adc_clk, + hrxc_ssp_frame, hrxc_ssp_din, ssp_dout, hrxc_ssp_clk, + cross_hi, cross_lo, + hrxc_dbg, + hi_read_rx_xcorr_848, hi_read_rx_xcorr_snoop, hi_read_rx_xcorr_quarter +); + +hi_simulate hs( + pck0, ck_1356meg, ck_1356megb, + hs_pwr_lo, hs_pwr_hi, hs_pwr_oe1, hs_pwr_oe2, hs_pwr_oe3, hs_pwr_oe4, + adc_d, hs_adc_clk, + hs_ssp_frame, hs_ssp_din, ssp_dout, hs_ssp_clk, + cross_hi, cross_lo, + hs_dbg, + hi_simulate_mod_type +); + +hi_iso14443a hisn( + pck0, ck_1356meg, ck_1356megb, + hisn_pwr_lo, hisn_pwr_hi, hisn_pwr_oe1, hisn_pwr_oe2, hisn_pwr_oe3, hisn_pwr_oe4, + adc_d, hisn_adc_clk, + hisn_ssp_frame, hisn_ssp_din, ssp_dout, hisn_ssp_clk, + cross_hi, cross_lo, + hisn_dbg, + hi_simulate_mod_type +); + +// Major modes: +// 000 -- LF reader (generic) +// 001 -- LF simulated tag (generic) +// 010 -- HF reader, transmitting to tag; modulation depth selectable +// 011 -- HF reader, receiving from tag, correlating as it goes; frequency selectable +// 100 -- HF simulated tag +// 101 -- HF ISO14443-A +// 110 -- LF passthrough +// 111 -- everything off + +mux8 mux_ssp_clk (major_mode, ssp_clk, lr_ssp_clk, ls_ssp_clk, ht_ssp_clk, hrxc_ssp_clk, hs_ssp_clk, hisn_ssp_clk, lp_ssp_clk, 1'b0); +mux8 mux_ssp_din (major_mode, ssp_din, lr_ssp_din, ls_ssp_din, ht_ssp_din, hrxc_ssp_din, hs_ssp_din, hisn_ssp_din, lp_ssp_din, 1'b0); +mux8 mux_ssp_frame (major_mode, ssp_frame, lr_ssp_frame, ls_ssp_frame, ht_ssp_frame, hrxc_ssp_frame, hs_ssp_frame, hisn_ssp_frame, lp_ssp_frame, 1'b0); +mux8 mux_pwr_oe1 (major_mode, pwr_oe1, lr_pwr_oe1, ls_pwr_oe1, ht_pwr_oe1, hrxc_pwr_oe1, hs_pwr_oe1, hisn_pwr_oe1, lp_pwr_oe1, 1'b0); +mux8 mux_pwr_oe2 (major_mode, pwr_oe2, lr_pwr_oe2, ls_pwr_oe2, ht_pwr_oe2, hrxc_pwr_oe2, hs_pwr_oe2, hisn_pwr_oe2, lp_pwr_oe2, 1'b0); +mux8 mux_pwr_oe3 (major_mode, pwr_oe3, lr_pwr_oe3, ls_pwr_oe3, ht_pwr_oe3, hrxc_pwr_oe3, hs_pwr_oe3, hisn_pwr_oe3, lp_pwr_oe3, 1'b0); +mux8 mux_pwr_oe4 (major_mode, pwr_oe4, lr_pwr_oe4, ls_pwr_oe4, ht_pwr_oe4, hrxc_pwr_oe4, hs_pwr_oe4, hisn_pwr_oe4, lp_pwr_oe4, 1'b0); +mux8 mux_pwr_lo (major_mode, pwr_lo, lr_pwr_lo, ls_pwr_lo, ht_pwr_lo, hrxc_pwr_lo, hs_pwr_lo, hisn_pwr_lo, lp_pwr_lo, 1'b0); +mux8 mux_pwr_hi (major_mode, pwr_hi, lr_pwr_hi, ls_pwr_hi, ht_pwr_hi, hrxc_pwr_hi, hs_pwr_hi, hisn_pwr_hi, lp_pwr_hi, 1'b0); +mux8 mux_adc_clk (major_mode, adc_clk, lr_adc_clk, ls_adc_clk, ht_adc_clk, hrxc_adc_clk, hs_adc_clk, hisn_adc_clk, lp_adc_clk, 1'b0); +mux8 mux_dbg (major_mode, dbg, lr_dbg, ls_dbg, ht_dbg, hrxc_dbg, hs_dbg, hisn_dbg, lp_dbg, 1'b0); + +// In all modes, let the ADC's outputs be enabled. +assign adc_noe = 1'b0; + +endmodule