X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/78f59945a725db88acacc772a37f32ff6debea56..e1778858ddc53a6a82e8ee24f02e6b673687f69a:/bootrom/bootrom.c

diff --git a/bootrom/bootrom.c b/bootrom/bootrom.c
index 8b052be7..9d9dcad4 100644
--- a/bootrom/bootrom.c
+++ b/bootrom/bootrom.c
@@ -49,8 +49,7 @@ static void ConfigClocks(void)
         PMC_MAIN_OSC_STARTUP_DELAY(8);
 
 	// wait for main oscillator to stabilize
-	while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS) )
-		;
+	while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS) ) {};
 
     // PLL output clock frequency in range  80 - 160 MHz needs CKGR_PLL = 00
     // PLL output clock frequency in range 150 - 180 MHz needs CKGR_PLL = 10
@@ -63,8 +62,7 @@ static void ConfigClocks(void)
 		PMC_PLL_USB_DIVISOR(1);
 
 	// wait for PLL to lock
-	while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK) )
-		;
+	while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK) ) {};
 
 	// we want a master clock (MCK) to be PLL clock / 2 = 96Mhz / 2 = 48Mhz
 	// datasheet recommends that this register is programmed in two operations
@@ -72,15 +70,13 @@ static void ConfigClocks(void)
     AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
 
 	// wait for main clock ready signal
-	while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) )
-		;
+	while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) ) {};
 
 	// set the source to PLL
     AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2 | AT91C_PMC_CSS_PLL_CLK;
 
 	// wait for main clock ready signal
-	while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) )
-		;
+	while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) ) {};
 }
 
 static void Fatal(void) {
@@ -141,10 +137,10 @@ void UsbPacketReceived(uint8_t *packet, int len) {
 				// Wait until flashing of page finishes
 				uint32_t sr;
 				while(!((sr = AT91C_BASE_EFC0->EFC_FSR) & AT91C_MC_FRDY));
-                if(sr & (AT91C_MC_LOCKE | AT91C_MC_PROGE)) {
-                    dont_ack = 1;
-                    cmd_send(CMD_NACK,sr,0,0,0,0);
-                }
+				if(sr & (AT91C_MC_LOCKE | AT91C_MC_PROGE)) {
+					dont_ack = 1;
+					cmd_send(CMD_NACK,sr,0,0,0,0);
+				}
 			}
 		} break;
       
@@ -199,8 +195,7 @@ static void flash_mode(int externally_entered)
 	size_t rx_len;
 
 	usb_enable();
-	for (volatile size_t i=0; i<0x100000; i++)
-		;
+	for (volatile size_t i=0; i<0x100000; i++) {};
 
 	for(;;) {
 		WDT_HIT();
@@ -277,10 +272,10 @@ void BootROM(void)
 	LED_B_OFF();
 	LED_A_OFF();
 
-	AT91C_BASE_EFC0->EFC_FMR =
-		AT91C_MC_FWS_1FWS |
-		MC_FLASH_MODE_MASTER_CLK_IN_MHZ(48);
-
+	AT91C_BASE_EFC0->EFC_FMR = AT91C_MC_FWS_1FWS | MC_FLASH_MODE_MASTER_CLK_IN_MHZ(48);
+#ifdef HAS_512_FLASH
+	AT91C_BASE_EFC1->EFC_FMR = AT91C_MC_FWS_1FWS | MC_FLASH_MODE_MASTER_CLK_IN_MHZ(48);
+#endif	
     // Initialize all system clocks
     ConfigClocks();