X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/7bc95e2e43c0b00b72fc794b18c26a880ac19d1c..34e2af02a4a2837135a855111bfd7e2561fc6b83:/armsrc/util.c diff --git a/armsrc/util.c b/armsrc/util.c index 6d34ae5e..a0fa50d3 100644 --- a/armsrc/util.c +++ b/armsrc/util.c @@ -12,9 +12,30 @@ #include "util.h" #include "string.h" #include "apps.h" +#include "BigBuf.h" + + + +void print_result(char *name, uint8_t *buf, size_t len) { + uint8_t *p = buf; + + if ( len % 16 == 0 ) { + for(; p-buf < len; p += 16) + Dbprintf("[%s:%d/%d] %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x", + name, + p-buf, + len, + p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15] + ); + } + else { + for(; p-buf < len; p += 8) + Dbprintf("[%s:%d/%d] %02x %02x %02x %02x %02x %02x %02x %02x", name, p-buf, len, p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]); + } +} size_t nbytes(size_t nbits) { - return (nbits/8)+((nbits%8)>0); + return (nbits >> 3)+((nbits % 8) > 0); } uint32_t SwapBits(uint32_t value, int nrbits) { @@ -45,6 +66,26 @@ uint64_t bytes_to_num(uint8_t* src, size_t len) return num; } +// RotateLeft - Ultralight, Desfire +void rol(uint8_t *data, const size_t len){ + uint8_t first = data[0]; + for (size_t i = 0; i < len-1; i++) { + data[i] = data[i+1]; + } + data[len-1] = first; +} +void lsl (uint8_t *data, size_t len) { + for (size_t n = 0; n < len - 1; n++) { + data[n] = (data[n] << 1) | (data[n+1] >> 7); + } + data[len - 1] <<= 1; +} + +int32_t le24toh (uint8_t data[3]) +{ + return (data[2] << 16) | (data[1] << 8) | data[0]; +} + void LEDsoff() { LED_A_OFF(); @@ -225,29 +266,30 @@ void FormatVersionInformation(char *dst, int len, const char *prefix, void *vers { struct version_information *v = (struct version_information*)version_information; dst[0] = 0; - strncat(dst, prefix, len); + strncat(dst, prefix, len-1); if(v->magic != VERSION_INFORMATION_MAGIC) { - strncat(dst, "Missing/Invalid version information", len); + strncat(dst, "Missing/Invalid version information\n", len - strlen(dst) - 1); return; } if(v->versionversion != 1) { - strncat(dst, "Version information not understood", len); + strncat(dst, "Version information not understood\n", len - strlen(dst) - 1); return; } if(!v->present) { - strncat(dst, "Version information not available", len); + strncat(dst, "Version information not available\n", len - strlen(dst) - 1); return; } - strncat(dst, v->svnversion, len); + strncat(dst, v->gitversion, len - strlen(dst) - 1); if(v->clean == 0) { - strncat(dst, "-unclean", len); + strncat(dst, "-unclean", len - strlen(dst) - 1); } else if(v->clean == 2) { - strncat(dst, "-suspect", len); + strncat(dst, "-suspect", len - strlen(dst) - 1); } - strncat(dst, " ", len); - strncat(dst, v->buildtime, len); + strncat(dst, " ", len - strlen(dst) - 1); + strncat(dst, v->buildtime, len - strlen(dst) - 1); + strncat(dst, "\n", len - strlen(dst) - 1); } // ------------------------------------------------------------------------- @@ -262,11 +304,12 @@ void FormatVersionInformation(char *dst, int len, const char *prefix, void *vers void StartTickCount() { -// must be 0x40, but on my cpu - included divider is optimal -// 0x20 - 1 ms / bit -// 0x40 - 2 ms / bit - - AT91C_BASE_RTTC->RTTC_RTMR = AT91C_RTTC_RTTRST + 0x001D; // was 0x003B + // This timer is based on the slow clock. The slow clock frequency is between 22kHz and 40kHz. + // We can determine the actual slow clock frequency by looking at the Main Clock Frequency Register. + uint16_t mainf = AT91C_BASE_PMC->PMC_MCFR & 0xffff; // = 16 * main clock frequency (16MHz) / slow clock frequency + // set RealTimeCounter divider to count at 1kHz: + AT91C_BASE_RTTC->RTTC_RTMR = AT91C_RTTC_RTTRST | ((256000 + (mainf/2)) / mainf); + // note: worst case precision is approx 2.5% } /* @@ -302,7 +345,7 @@ void StartCountUS() } uint32_t RAMFUNC GetCountUS(){ - return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV / 15) * 10); + return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV * 2) / 3); //was /15) * 10); } static uint32_t GlobalUsCounter = 0; @@ -363,8 +406,6 @@ void StartCountSspClk() // while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME)); // wait for ssp_frame to go high (start of frame) while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME); // wait for ssp_frame to be low - // after the falling edge of ssp_frame, there is delay of 1/13,56MHz (73ns) until the next rising edge of ssp_clk. This are only a few - // processor cycles. We therefore may or may not be able to sync on this edge. Therefore better make sure that we miss it: while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)); // wait for ssp_clk to go high // note: up to now two ssp_clk rising edges have passed since the rising edge of ssp_frame // it is now safe to assert a sync signal. This sets all timers to 0 on next active clock edge @@ -377,8 +418,13 @@ void StartCountSspClk() // we can use the counter. while (AT91C_BASE_TC0->TC_CV < 0xFFF0); } - - +void ResetSspClk(void) { + //enable clock of timer and software trigger + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + while (AT91C_BASE_TC2->TC_CV > 0); +} uint32_t RAMFUNC GetCountSspClk(){ uint32_t tmp_count; tmp_count = (AT91C_BASE_TC2->TC_CV << 16) | AT91C_BASE_TC0->TC_CV; @@ -390,4 +436,80 @@ uint32_t RAMFUNC GetCountSspClk(){ } } +// ------------------------------------------------------------------------- +// Timer for bitbanging, or LF stuff when you need a very precis timer +// 1us = 1.5ticks +// ------------------------------------------------------------------------- +void StartTicks(void){ + //initialization of the timer + // tc1 is higher 0xFFFF0000 + // tc0 is lower 0x0000FFFF + AT91C_BASE_PMC->PMC_PCER |= (1 << AT91C_ID_TC0) | (1 << AT91C_ID_TC1); + AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_TIOA0 | AT91C_TCB_TC2XC2S_NONE; + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; + AT91C_BASE_TC0->TC_CMR = AT91C_TC_CLKS_TIMER_DIV3_CLOCK | // MCK(48MHz) / 32 + AT91C_TC_WAVE | AT91C_TC_WAVESEL_UP_AUTO | AT91C_TC_ACPA_CLEAR | + AT91C_TC_ACPC_SET | AT91C_TC_ASWTRG_SET; + AT91C_BASE_TC0->TC_RA = 1; + AT91C_BASE_TC0->TC_RC = 0; + + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; // timer disable + AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_XC1; // from TC0 + + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + AT91C_BASE_TCB->TCB_BCR = 1; + + // wait until timer becomes zero. + while (AT91C_BASE_TC1->TC_CV > 0); +} + +// Wait - Spindelay in ticks. +// if called with a high number, this will trigger the WDT... +void WaitTicks(uint32_t ticks){ + if ( ticks == 0 ) return; + ticks += GET_TICKS; + while (GET_TICKS < ticks); +} +// Wait / Spindelay in us (microseconds) +// 1us = 1.5ticks. +void WaitUS(uint16_t us){ + if ( us == 0 ) return; + WaitTicks( (uint32_t)(us * 1.5) ); +} +void WaitMS(uint16_t ms){ + if (ms == 0) return; + WaitTicks( (uint32_t)(ms * 1500) ); +} +// Starts Clock and waits until its reset +void ResetTicks(void){ + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + while (AT91C_BASE_TC1->TC_CV > 0); +} +void ResetTimer(AT91PS_TC timer){ + timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + while(timer->TC_CV > 0) ; +} +// stop clock +void StopTicks(void){ + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; + AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; +} + +static uint64_t next_random = 1; + +/* Generates a (non-cryptographically secure) 32-bit random number. + * + * We don't have an implementation of the "rand" function or a clock to seed it + * with, so we just call GetTickCount the first time to seed ourselves. + */ +uint32_t prand() { + if (next_random == 1) { + next_random = GetTickCount(); + } + + next_random = next_random * 6364136223846793005 + 1; + return (uint32_t)(next_random >> 32) % 0xffffffff; +}