X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/7bc95e2e43c0b00b72fc794b18c26a880ac19d1c..f028213f0e2073099dbfae86a43f6a43bdd9c495:/armsrc/iso14443a.c?ds=inline diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c index ca888295..d5dd05ca 100644 --- a/armsrc/iso14443a.c +++ b/armsrc/iso14443a.c @@ -42,15 +42,14 @@ static uint8_t iso14_pcb_blocknum = 0; // // Total delays including SSC-Transfers between ARM and FPGA. These are in carrier clock cycles (1/13,56MHz) // -// When the PM acts as reader and is receiving, it takes -// 3 ticks for the A/D conversion -// 10 ticks ( 16 on average) delay in the modulation detector. -// 6 ticks until the SSC samples the first data -// 7*16 ticks to complete the transfer from FPGA to ARM -// 8 ticks to the next ssp_clk rising edge +// When the PM acts as reader and is receiving tag data, it takes +// 3 ticks delay in the AD converter +// 16 ticks until the modulation detector completes and sets curbit +// 8 ticks until bit_to_arm is assigned from curbit +// 8*16 ticks for the transfer from FPGA to ARM // 4*16 ticks until we measure the time // - 8*16 ticks because we measure the time of the previous transfer -#define DELAY_AIR2ARM_AS_READER (3 + 10 + 6 + 7*16 + 8 + 4*16 - 8*16) +#define DELAY_AIR2ARM_AS_READER (3 + 16 + 8 + 8*16 + 4*16 - 8*16) // When the PM acts as a reader and is sending, it takes // 4*16 ticks until we can write data to the sending hold register @@ -61,15 +60,15 @@ static uint8_t iso14_pcb_blocknum = 0; #define DELAY_ARM2AIR_AS_READER (4*16 + 8*16 + 8 + 8 + 1) // When the PM acts as tag and is receiving it takes -// 12 ticks delay in the RF part, +// 2 ticks delay in the RF part (for the first falling edge), // 3 ticks for the A/D conversion, // 8 ticks on average until the start of the SSC transfer, // 8 ticks until the SSC samples the first data // 7*16 ticks to complete the transfer from FPGA to ARM // 8 ticks until the next ssp_clk rising edge -// 3*16 ticks until we measure the time +// 4*16 ticks until we measure the time // - 8*16 ticks because we measure the time of the previous transfer -#define DELAY_AIR2ARM_AS_TAG (12 + 3 + 8 + 8 + 7*16 + 8 + 3*16 - 8*16) +#define DELAY_AIR2ARM_AS_TAG (2 + 3 + 8 + 8 + 7*16 + 8 + 4*16 - 8*16) // The FPGA will report its internal sending delay in uint16_t FpgaSendQueueDelay; @@ -78,29 +77,30 @@ uint16_t FpgaSendQueueDelay; #define DELAY_FPGA_QUEUE (FpgaSendQueueDelay<<1) // When the PM acts as tag and is sending, it takes -// 5*16 ticks until we can write data to the sending hold register +// 4*16 ticks until we can write data to the sending hold register // 8*16 ticks until the SHR is transferred to the Sending Shift Register // 8 ticks until the first transfer starts // 8 ticks later the FPGA samples the data // + a varying number of ticks in the FPGA Delay Queue (mod_sig_buf) // + 1 tick to assign mod_sig_coil -#define DELAY_ARM2AIR_AS_TAG (5*16 + 8*16 + 8 + 8 + DELAY_FPGA_QUEUE + 1) +#define DELAY_ARM2AIR_AS_TAG (4*16 + 8*16 + 8 + 8 + DELAY_FPGA_QUEUE + 1) // When the PM acts as sniffer and is receiving tag data, it takes // 3 ticks A/D conversion -// 16 ticks delay in the modulation detector (on average). -// + 16 ticks until it's result is sampled. +// 14 ticks to complete the modulation detection +// 8 ticks (on average) until the result is stored in to_arm // + the delays in transferring data - which is the same for // sniffing reader and tag data and therefore not relevant -#define DELAY_TAG_AIR2ARM_AS_SNIFFER (3 + 16 + 16) +#define DELAY_TAG_AIR2ARM_AS_SNIFFER (3 + 14 + 8) -// When the PM acts as sniffer and is receiving tag data, it takes -// 12 ticks delay in analogue RF receiver +// When the PM acts as sniffer and is receiving reader data, it takes +// 2 ticks delay in analogue RF receiver (for the falling edge of the +// start bit, which marks the start of the communication) // 3 ticks A/D conversion -// 8 ticks on average until we sample the data. +// 8 ticks on average until the data is stored in to_arm. // + the delays in transferring data - which is the same for // sniffing reader and tag data and therefore not relevant -#define DELAY_READER_AIR2ARM_AS_SNIFFER (12 + 3 + 8) +#define DELAY_READER_AIR2ARM_AS_SNIFFER (2 + 3 + 8) //variables used for timing purposes: //these are in ssp_clk cycles: @@ -190,8 +190,9 @@ void AppendCrc14443a(uint8_t* data, int len) } // The function LogTrace() is also used by the iClass implementation in iClass.c -bool RAMFUNC LogTrace(const uint8_t * btBytes, uint8_t iLen, uint32_t timestamp, uint32_t dwParity, bool bReader) +bool RAMFUNC LogTrace(const uint8_t * btBytes, uint8_t iLen, uint32_t timestamp, uint32_t dwParity, bool readerToTag) { + if (!tracing) return FALSE; // Return when trace is full if (traceLen + sizeof(timestamp) + sizeof(dwParity) + iLen >= TRACE_SIZE) { tracing = FALSE; // don't trace any more @@ -203,7 +204,8 @@ bool RAMFUNC LogTrace(const uint8_t * btBytes, uint8_t iLen, uint32_t timestamp, trace[traceLen++] = ((timestamp >> 8) & 0xff); trace[traceLen++] = ((timestamp >> 16) & 0xff); trace[traceLen++] = ((timestamp >> 24) & 0xff); - if (!bReader) { + + if (!readerToTag) { trace[traceLen - 1] |= 0x80; } trace[traceLen++] = ((dwParity >> 0) & 0xff); @@ -236,6 +238,15 @@ bool RAMFUNC LogTrace(const uint8_t * btBytes, uint8_t iLen, uint32_t timestamp, //----------------------------------------------------------------------------- static tUart Uart; +// Lookup-Table to decide if 4 raw bits are a modulation. +// We accept two or three consecutive "0" in any position with the rest "1" +const bool Mod_Miller_LUT[] = { + TRUE, TRUE, FALSE, TRUE, FALSE, FALSE, FALSE, FALSE, + TRUE, TRUE, FALSE, FALSE, TRUE, FALSE, FALSE, FALSE +}; +#define IsMillerModulationNibble1(b) (Mod_Miller_LUT[(b & 0x00F0) >> 4]) +#define IsMillerModulationNibble2(b) (Mod_Miller_LUT[(b & 0x000F)]) + void UartReset() { Uart.state = STATE_UNSYNCD; @@ -249,22 +260,6 @@ void UartReset() Uart.endTime = 0; } -inline RAMFUNC Modulation_t MillerModulation(uint8_t b) -{ - // switch (b & 0x88) { - // case 0x00: return MILLER_MOD_BOTH_HALVES; - // case 0x08: return MILLER_MOD_FIRST_HALF; - // case 0x80: return MILLER_MOD_SECOND_HALF; - // case 0x88: return MILLER_MOD_NOMOD; - // } - // test the second cycle for a pause. For whatever reason the startbit tends to appear earlier than the rest. - switch (b & 0x44) { - case 0x00: return MOD_BOTH_HALVES; - case 0x04: return MOD_FIRST_HALF; - case 0x40: return MOD_SECOND_HALF; - default: return MOD_NOMOD; - } -} // use parameter non_real_time to provide a timestamp. Set to 0 if the decoder should measure real time static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time) @@ -293,14 +288,18 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time) if (Uart.syncBit != 0xFFFF) { Uart.startTime = non_real_time?non_real_time:(GetCountSspClk() & 0xfffffff8); Uart.startTime -= Uart.syncBit; + Uart.endTime = Uart.startTime; Uart.state = STATE_START_OF_COMMUNICATION; } } } else { - switch (MillerModulation(Uart.twoBits >> Uart.syncBit)) { - case MOD_FIRST_HALF: // Sequence Z = 0 + if (IsMillerModulationNibble1(Uart.twoBits >> Uart.syncBit)) { + if (IsMillerModulationNibble2(Uart.twoBits >> Uart.syncBit)) { // Modulation in both halves - error + UartReset(); + Uart.highCnt = 6; + } else { // Modulation in first half = Sequence Z = logic "0" if (Uart.state == STATE_MILLER_X) { // error - must not follow after X UartReset(); Uart.highCnt = 6; @@ -317,8 +316,9 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time) Uart.shiftReg = 0; } } - break; - case MOD_SECOND_HALF: // Sequence X = 1 + } + } else { + if (IsMillerModulationNibble2(Uart.twoBits >> Uart.syncBit)) { // Modulation second half = Sequence X = logic "1" Uart.bitCount++; Uart.shiftReg = (Uart.shiftReg >> 1) | 0x100; // add a 1 to the shiftreg Uart.state = STATE_MILLER_X; @@ -330,15 +330,14 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time) Uart.bitCount = 0; Uart.shiftReg = 0; } - break; - case MOD_NOMOD: // no modulation in both halves - Sequence Y + } else { // no modulation in both halves - Sequence Y if (Uart.state == STATE_MILLER_Z || Uart.state == STATE_MILLER_Y) { // Y after logic "0" - End of Communication Uart.state = STATE_UNSYNCD; if(Uart.len == 0 && Uart.bitCount > 0) { // if we decoded some bits Uart.shiftReg >>= (9 - Uart.bitCount); // add them to the output Uart.output[Uart.len++] = (Uart.shiftReg & 0xff); Uart.parityBits <<= 1; // no parity bit - add "0" - Uart.bitCount--; // last "0" was part of the EOC sequence + Uart.bitCount--; // last "0" was part of the EOC sequence } return TRUE; } @@ -357,11 +356,7 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time) Uart.shiftReg = 0; } } - break; - case MOD_BOTH_HALVES: // Error - UartReset(); - Uart.highCnt = 6; - return FALSE; + } } } @@ -388,9 +383,11 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time) // Note 2: parameter offset is used to determine the position of the parity bits (required for the anticollision command only) static tDemod Demod; +// Lookup-Table to decide if 4 raw bits are a modulation. +// We accept three or four "1" in any position const bool Mod_Manchester_LUT[] = { - FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, TRUE, TRUE, - FALSE, FALSE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE + FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, TRUE, + FALSE, FALSE, FALSE, TRUE, FALSE, TRUE, TRUE, TRUE }; #define IsManchesterModulationNibble1(b) (Mod_Manchester_LUT[(b & 0x00F0) >> 4]) @@ -434,7 +431,7 @@ static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non else if ((Demod.twoBits & 0x03B8) == 0x0380) Demod.syncBit = 2; else if ((Demod.twoBits & 0x01DC) == 0x01C0) Demod.syncBit = 1; else if ((Demod.twoBits & 0x00EE) == 0x00E0) Demod.syncBit = 0; - if (Demod.syncBit < 8) { + if (Demod.syncBit != 0xFFFF) { Demod.startTime = non_real_time?non_real_time:(GetCountSspClk() & 0xfffffff8); Demod.startTime -= Demod.syncBit; Demod.bitCount = offset; // number of decoded data bits @@ -473,15 +470,17 @@ static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non } Demod.endTime = Demod.startTime + 8*(9*Demod.len + Demod.bitCount + 1); } else { // no modulation in both halves - End of communication - if(Demod.bitCount > 0) { // if we decoded bits - Demod.shiftReg >>= (9 - Demod.bitCount); // add the remaining decoded bits to the output - Demod.output[Demod.len++] = Demod.shiftReg & 0xff; - // No parity bit, so just shift a 0 - Demod.parityBits <<= 1; + if (Demod.len > 0 || Demod.bitCount > 0) { // received something + if(Demod.bitCount > 0) { // if we decoded bits + Demod.shiftReg >>= (9 - Demod.bitCount); // add the remaining decoded bits to the output + Demod.output[Demod.len++] = Demod.shiftReg & 0xff; + // No parity bit, so just shift a 0 + Demod.parityBits <<= 1; + } + return TRUE; // we are finished with decoding the raw data sequence + } else { // nothing received. Start over + DemodReset(); } - Demod.state = DEMOD_UNSYNCD; // start from the beginning - Demod.twoBits = 0; - return TRUE; // we are finished with decoding the raw data sequence } } @@ -633,7 +632,7 @@ void RAMFUNC SnoopIso14443a(uint8_t param) { previous_data = *data; rsamples++; data++; - if(data > dmaBuf + DMA_BUFFER_SIZE) { + if(data == dmaBuf + DMA_BUFFER_SIZE) { data = dmaBuf; } } // main cycle @@ -1410,7 +1409,7 @@ static int EmSendCmd14443aRaw(uint8_t *resp, int respLen, bool correctionNeeded) i = 1; } - // clear receiving shift register and holding register + // clear receiving shift register and holding register while(!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY)); b = AT91C_BASE_SSC->SSC_RHR; (void) b; while(!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY)); @@ -1766,6 +1765,7 @@ int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, u } void iso14443a_setup(uint8_t fpga_minor_mode) { + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); // Set up the synchronous serial port FpgaSetupSsc(); // connect Demodulated Signal to ADC: @@ -1861,8 +1861,10 @@ void ReaderIso14443a(UsbCommand *c) if(param & ISO14A_APPEND_CRC) { AppendCrc14443a(cmd,len); len += 2; + lenbits += 16; } if(lenbits>0) { + ReaderTransmitBitsPar(cmd,lenbits,GetParity(cmd,lenbits/8), NULL); } else { ReaderTransmit(cmd,len, NULL); @@ -2580,11 +2582,12 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * //May just aswell send the collected ar_nr in the response aswell cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,0,0,&ar_nr_responses,ar_nr_collected*4*4); } + if(flags & FLAG_NR_AR_ATTACK) { if(ar_nr_collected > 1) { Dbprintf("Collected two pairs of AR/NR which can be used to extract keys from reader:"); - Dbprintf("../tools/mfkey/mfkey32 %08x %08x %08x %08x", + Dbprintf("../tools/mfkey/mfkey32 %08x %08x %08x %08x %08x %08x", ar_nr_responses[0], // UID ar_nr_responses[1], //NT ar_nr_responses[2], //AR1 @@ -2595,7 +2598,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * } else { Dbprintf("Failed to obtain two AR/NR pairs!"); if(ar_nr_collected >0) { - Dbprintf("Only got these: UID=%08d, nonce=%08d, AR1=%08d, NR1=%08d", + Dbprintf("Only got these: UID=%08x, nonce=%08x, AR1=%08x, NR1=%08x", ar_nr_responses[0], // UID ar_nr_responses[1], //NT ar_nr_responses[2], //AR1 @@ -2749,7 +2752,7 @@ void RAMFUNC SniffMifare(uint8_t param) { previous_data = *data; sniffCounter++; data++; - if(data > dmaBuf + DMA_BUFFER_SIZE) { + if(data == dmaBuf + DMA_BUFFER_SIZE) { data = dmaBuf; }