X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/7bc95e2e43c0b00b72fc794b18c26a880ac19d1c..refs/heads/master:/armsrc/fpgaloader.c?ds=inline diff --git a/armsrc/fpgaloader.c b/armsrc/fpgaloader.c index 1e728e11..61db66d3 100644 --- a/armsrc/fpgaloader.c +++ b/armsrc/fpgaloader.c @@ -1,5 +1,6 @@ //----------------------------------------------------------------------------- // Jonathan Westhues, April 2006 +// iZsh , 2014 // // This code is licensed to you under the terms of the GNU GPL, version 2 or, // at your option, any later version. See the LICENSE.txt file for the text of @@ -9,10 +10,29 @@ // mode once it is configured. //----------------------------------------------------------------------------- -#include "proxmark3.h" +#include "fpgaloader.h" + +#include +#include +#include #include "apps.h" +#include "fpga.h" +#include "proxmark3.h" #include "util.h" #include "string.h" +#include "BigBuf.h" +#include "zlib.h" + +// remember which version of the bitstream we have already downloaded to the FPGA +static int downloaded_bitstream = 0; + +// this is where the bitstreams are located in memory: +extern uint8_t _binary_obj_fpga_all_bit_z_start, _binary_obj_fpga_all_bit_z_end; + +static uint8_t *fpga_image_ptr = NULL; +static uint32_t uncompressed_bytes_cnt; + +#define OUTPUT_BUFFER_LEN 80 //----------------------------------------------------------------------------- // Set up the Serial Peripheral Interface as master @@ -29,16 +49,16 @@ void SetupSpi(int mode) // Disable PIO control of the following pins, allows use by the SPI peripheral AT91C_BASE_PIOA->PIO_PDR = - GPIO_NCS0 | - GPIO_NCS2 | - GPIO_MISO | - GPIO_MOSI | + GPIO_NCS0 | + GPIO_NCS2 | + GPIO_MISO | + GPIO_MOSI | GPIO_SPCK; AT91C_BASE_PIOA->PIO_ASR = - GPIO_NCS0 | - GPIO_MISO | - GPIO_MOSI | + GPIO_NCS0 | + GPIO_MISO | + GPIO_MOSI | GPIO_SPCK; AT91C_BASE_PIOA->PIO_BSR = GPIO_NCS2; @@ -51,57 +71,56 @@ void SetupSpi(int mode) switch (mode) { case SPI_FPGA_MODE: AT91C_BASE_SPI->SPI_MR = - ( 0 << 24) | // Delay between chip selects (take default: 6 MCK periods) - (14 << 16) | // Peripheral Chip Select (selects FPGA SPI_NCS0 or PA11) - ( 0 << 7) | // Local Loopback Disabled - ( 1 << 4) | // Mode Fault Detection disabled - ( 0 << 2) | // Chip selects connected directly to peripheral - ( 0 << 1) | // Fixed Peripheral Select - ( 1 << 0); // Master Mode + ( 0 << 24) | // Delay between chip selects (take default: 6 MCK periods) + (14 << 16) | // Peripheral Chip Select (selects FPGA SPI_NCS0 or PA11) + ( 0 << 7) | // Local Loopback Disabled + ( 1 << 4) | // Mode Fault Detection disabled + ( 0 << 2) | // Chip selects connected directly to peripheral + ( 0 << 1) | // Fixed Peripheral Select + ( 1 << 0); // Master Mode AT91C_BASE_SPI->SPI_CSR[0] = - ( 1 << 24) | // Delay between Consecutive Transfers (32 MCK periods) - ( 1 << 16) | // Delay Before SPCK (1 MCK period) - ( 6 << 8) | // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud - ( 8 << 4) | // Bits per Transfer (16 bits) - ( 0 << 3) | // Chip Select inactive after transfer - ( 1 << 1) | // Clock Phase data captured on leading edge, changes on following edge - ( 0 << 0); // Clock Polarity inactive state is logic 0 + ( 1 << 24) | // Delay between Consecutive Transfers (32 MCK periods) + ( 1 << 16) | // Delay Before SPCK (1 MCK period) + ( 6 << 8) | // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud + ( 8 << 4) | // Bits per Transfer (16 bits) + ( 0 << 3) | // Chip Select inactive after transfer + ( 1 << 1) | // Clock Phase data captured on leading edge, changes on following edge + ( 0 << 0); // Clock Polarity inactive state is logic 0 break; case SPI_LCD_MODE: AT91C_BASE_SPI->SPI_MR = - ( 0 << 24) | // Delay between chip selects (take default: 6 MCK periods) - (11 << 16) | // Peripheral Chip Select (selects LCD SPI_NCS2 or PA10) - ( 0 << 7) | // Local Loopback Disabled - ( 1 << 4) | // Mode Fault Detection disabled - ( 0 << 2) | // Chip selects connected directly to peripheral - ( 0 << 1) | // Fixed Peripheral Select - ( 1 << 0); // Master Mode + ( 0 << 24) | // Delay between chip selects (take default: 6 MCK periods) + (11 << 16) | // Peripheral Chip Select (selects LCD SPI_NCS2 or PA10) + ( 0 << 7) | // Local Loopback Disabled + ( 1 << 4) | // Mode Fault Detection disabled + ( 0 << 2) | // Chip selects connected directly to peripheral + ( 0 << 1) | // Fixed Peripheral Select + ( 1 << 0); // Master Mode AT91C_BASE_SPI->SPI_CSR[2] = - ( 1 << 24) | // Delay between Consecutive Transfers (32 MCK periods) - ( 1 << 16) | // Delay Before SPCK (1 MCK period) - ( 6 << 8) | // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud - ( 1 << 4) | // Bits per Transfer (9 bits) - ( 0 << 3) | // Chip Select inactive after transfer - ( 1 << 1) | // Clock Phase data captured on leading edge, changes on following edge - ( 0 << 0); // Clock Polarity inactive state is logic 0 + ( 1 << 24) | // Delay between Consecutive Transfers (32 MCK periods) + ( 1 << 16) | // Delay Before SPCK (1 MCK period) + ( 6 << 8) | // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud + ( 1 << 4) | // Bits per Transfer (9 bits) + ( 0 << 3) | // Chip Select inactive after transfer + ( 1 << 1) | // Clock Phase data captured on leading edge, changes on following edge + ( 0 << 0); // Clock Polarity inactive state is logic 0 break; - default: // Disable SPI + default: // Disable SPI AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIDIS; break; } } //----------------------------------------------------------------------------- -// Set up the synchronous serial port, with the one set of options that we -// always use when we are talking to the FPGA. Both RX and TX are enabled. +// Set up the synchronous serial port with the set of options that fits +// the FPGA mode. Both RX and TX are always enabled. //----------------------------------------------------------------------------- -void FpgaSetupSsc(void) -{ +void FpgaSetupSsc(uint16_t FPGA_mode) { // First configure the GPIOs, and get ourselves a clock. AT91C_BASE_PIOA->PIO_ASR = - GPIO_SSC_FRAME | - GPIO_SSC_DIN | - GPIO_SSC_DOUT | + GPIO_SSC_FRAME | + GPIO_SSC_DIN | + GPIO_SSC_DOUT | GPIO_SSC_CLK; AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT; @@ -110,17 +129,21 @@ void FpgaSetupSsc(void) // Now set up the SSC proper, starting from a known state. AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST; - // RX clock comes from TX clock, RX starts when TX starts, data changes - // on RX clock rising edge, sampled on falling edge + // RX clock comes from TX clock, RX starts on Transmit Start, + // data and frame signal is sampled on falling edge of RK AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(1) | SSC_CLOCK_MODE_START(1); - // 8 bits per transfer, no loopback, MSB first, 1 transfer per sync - // pulse, no output sync, start on positive-going edge of sync - AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); + // 8, 16 or 32 bits per transfer, no loopback, MSB first, 1 transfer per sync + // pulse, no output sync + if ((FPGA_mode & FPGA_MAJOR_MODE_MASK) == FPGA_MAJOR_MODE_HF_READER && FpgaGetCurrent() == FPGA_BITSTREAM_HF) { + AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(16) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); + } else { + AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); + } - // clock comes from TK pin, no clock output, outputs change on falling - // edge of TK, sample on rising edge of TK - AT91C_BASE_SSC->SSC_TCMR = SSC_CLOCK_MODE_SELECT(2) | SSC_CLOCK_MODE_START(5); + // TX clock comes from TK pin, no clock output, outputs change on rising edge of TK, + // TF (frame sync) is sampled on falling edge of TK, start TX on rising edge of TF + AT91C_BASE_SSC->SSC_TCMR = SSC_CLOCK_MODE_SELECT(2) | SSC_CLOCK_MODE_START(5); // tx framing is the same as the rx framing AT91C_BASE_SSC->SSC_TFMR = AT91C_BASE_SSC->SSC_RFMR; @@ -134,22 +157,105 @@ void FpgaSetupSsc(void) // ourselves, not to another buffer). The stuff to manipulate those buffers // is in apps.h, because it should be inlined, for speed. //----------------------------------------------------------------------------- -bool FpgaSetupSscDma(uint8_t *buf, int len) +bool FpgaSetupSscDma(uint8_t *buf, uint16_t sample_count) { + if (buf == NULL) return false; + + AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; // Disable DMA Transfer + AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf; // transfer to this memory address + AT91C_BASE_PDC_SSC->PDC_RCR = sample_count; // transfer this many samples + AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf; // next transfer to same memory address + AT91C_BASE_PDC_SSC->PDC_RNCR = sample_count; // ... with same number of samples + AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN; // go! + return true; +} + + +//---------------------------------------------------------------------------- +// Uncompress (inflate) the FPGA data. Returns one decompressed byte with +// each call. +//---------------------------------------------------------------------------- +static int get_from_fpga_combined_stream(z_streamp compressed_fpga_stream, uint8_t *output_buffer) +{ + if (fpga_image_ptr == compressed_fpga_stream->next_out) { // need more data + compressed_fpga_stream->next_out = output_buffer; + compressed_fpga_stream->avail_out = OUTPUT_BUFFER_LEN; + fpga_image_ptr = output_buffer; + int res = inflate(compressed_fpga_stream, Z_SYNC_FLUSH); + if (res != Z_OK) + Dbprintf("inflate returned: %d, %s", res, compressed_fpga_stream->msg); + + if (res < 0) + return res; + } + + uncompressed_bytes_cnt++; + + return *fpga_image_ptr++; +} + +//---------------------------------------------------------------------------- +// Undo the interleaving of several FPGA config files. FPGA config files +// are combined into one big file: +// 288 bytes from FPGA file 1, followed by 288 bytes from FGPA file 2, etc. +//---------------------------------------------------------------------------- +static int get_from_fpga_stream(int bitstream_version, z_streamp compressed_fpga_stream, uint8_t *output_buffer) +{ + while((uncompressed_bytes_cnt / FPGA_INTERLEAVE_SIZE) % fpga_bitstream_num != (bitstream_version - 1)) { + // skip undesired data belonging to other bitstream_versions + get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer); + } + + return get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer); + +} + + +static voidpf fpga_inflate_malloc(voidpf opaque, uInt items, uInt size) +{ + return BigBuf_malloc(items*size); +} + + +static void fpga_inflate_free(voidpf opaque, voidpf address) { - if (buf == NULL) { - return false; - } - - AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; // Disable DMA Transfer - AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf; // transfer to this memory address - AT91C_BASE_PDC_SSC->PDC_RCR = len; // transfer this many bytes - AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf; // next transfer to same memory address - AT91C_BASE_PDC_SSC->PDC_RNCR = len; // ... with same number of bytes - AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN; // go! - - return true; + BigBuf_free(); BigBuf_Clear_ext(false); +} + + +//---------------------------------------------------------------------------- +// Initialize decompression of the respective (HF or LF) FPGA stream +//---------------------------------------------------------------------------- +static bool reset_fpga_stream(int bitstream_version, z_streamp compressed_fpga_stream, uint8_t *output_buffer) +{ + uint8_t header[FPGA_BITSTREAM_FIXED_HEADER_SIZE]; + + uncompressed_bytes_cnt = 0; + + // initialize z_stream structure for inflate: + compressed_fpga_stream->next_in = &_binary_obj_fpga_all_bit_z_start; + compressed_fpga_stream->avail_in = &_binary_obj_fpga_all_bit_z_end - &_binary_obj_fpga_all_bit_z_start; + compressed_fpga_stream->next_out = output_buffer; + compressed_fpga_stream->avail_out = OUTPUT_BUFFER_LEN; + compressed_fpga_stream->zalloc = &fpga_inflate_malloc; + compressed_fpga_stream->zfree = &fpga_inflate_free; + + inflateInit2(compressed_fpga_stream, 0); + + fpga_image_ptr = output_buffer; + + for (uint16_t i = 0; i < FPGA_BITSTREAM_FIXED_HEADER_SIZE; i++) { + header[i] = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer); + } + + // Check for a valid .bit file (starts with bitparse_fixed_header) + if(memcmp(bitparse_fixed_header, header, FPGA_BITSTREAM_FIXED_HEADER_SIZE) == 0) { + return true; + } else { + return false; + } } + static void DownloadFPGA_byte(unsigned char w) { #define SEND_BIT(x) { if(w & (1<PIO_OER = GPIO_FPGA_ON; AT91C_BASE_PIOA->PIO_PER = GPIO_FPGA_ON; - HIGH(GPIO_FPGA_ON); // ensure everything is powered on + HIGH(GPIO_FPGA_ON); // ensure everything is powered on SpinDelay(50); LED_D_ON(); // These pins are inputs - AT91C_BASE_PIOA->PIO_ODR = - GPIO_FPGA_NINIT | - GPIO_FPGA_DONE; + AT91C_BASE_PIOA->PIO_ODR = + GPIO_FPGA_NINIT | + GPIO_FPGA_DONE; // PIO controls the following pins - AT91C_BASE_PIOA->PIO_PER = - GPIO_FPGA_NINIT | - GPIO_FPGA_DONE; + AT91C_BASE_PIOA->PIO_PER = + GPIO_FPGA_NINIT | + GPIO_FPGA_DONE; // Enable pull-ups AT91C_BASE_PIOA->PIO_PPUER = GPIO_FPGA_NINIT | @@ -196,8 +304,8 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers LOW(GPIO_FPGA_DIN); // These pins are outputs AT91C_BASE_PIOA->PIO_OER = - GPIO_FPGA_NPROGRAM | - GPIO_FPGA_CCLK | + GPIO_FPGA_NPROGRAM | + GPIO_FPGA_CCLK | GPIO_FPGA_DIN; // enter FPGA configuration mode @@ -218,21 +326,13 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers return; } - if(bytereversal) { - /* This is only supported for uint32_t aligned images */ - if( ((int)FpgaImage % sizeof(uint32_t)) == 0 ) { - i=0; - while(FpgaImageLen-->0) - DownloadFPGA_byte(FpgaImage[(i++)^0x3]); - /* Explanation of the magic in the above line: - * i^0x3 inverts the lower two bits of the integer i, counting backwards - * for each 4 byte increment. The generated sequence of (i++)^3 is - * 3 2 1 0 7 6 5 4 11 10 9 8 15 14 13 12 etc. pp. - */ + for(i = 0; i < FpgaImageLen; i++) { + int b = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer); + if (b < 0) { + Dbprintf("Error %d during FpgaDownload", b); + break; } - } else { - while(FpgaImageLen-->0) - DownloadFPGA_byte(*FpgaImage++); + DownloadFPGA_byte(b); } // continue to clock FPGA until ready signal goes high @@ -250,39 +350,21 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers LED_D_OFF(); } -static char *bitparse_headers_start; -static char *bitparse_bitstream_end; -static int bitparse_initialized; + /* Simple Xilinx .bit parser. The file starts with the fixed opaque byte sequence * 00 09 0f f0 0f f0 0f f0 0f f0 00 00 01 * After that the format is 1 byte section type (ASCII character), 2 byte length * (big endian), bytes content. Except for section 'e' which has 4 bytes * length. */ -static const char _bitparse_fixed_header[] = {0x00, 0x09, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x00, 0x00, 0x01}; -static int bitparse_init(void * start_address, void *end_address) -{ - bitparse_initialized = 0; - - if(memcmp(_bitparse_fixed_header, start_address, sizeof(_bitparse_fixed_header)) != 0) { - return 0; /* Not matched */ - } else { - bitparse_headers_start= ((char*)start_address) + sizeof(_bitparse_fixed_header); - bitparse_bitstream_end= (char*)end_address; - bitparse_initialized = 1; - return 1; - } -} - -int bitparse_find_section(char section_name, char **section_start, unsigned int *section_length) +static int bitparse_find_section(int bitstream_version, char section_name, unsigned int *section_length, z_streamp compressed_fpga_stream, uint8_t *output_buffer) { - char *pos = bitparse_headers_start; int result = 0; - - if(!bitparse_initialized) return 0; - - while(pos < bitparse_bitstream_end) { - char current_name = *pos++; + #define MAX_FPGA_BIT_STREAM_HEADER_SEARCH 100 // maximum number of bytes to search for the requested section + uint16_t numbytes = 0; + while(numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH) { + char current_name = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer); + numbytes++; unsigned int current_length = 0; if(current_name < 'a' || current_name > 'e') { /* Strange section name, abort */ @@ -292,11 +374,13 @@ int bitparse_find_section(char section_name, char **section_start, unsigned int switch(current_name) { case 'e': /* Four byte length field */ - current_length += (*pos++) << 24; - current_length += (*pos++) << 16; + current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 24; + current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 16; + numbytes += 2; default: /* Fall through, two byte length field */ - current_length += (*pos++) << 8; - current_length += (*pos++) << 0; + current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 8; + current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 0; + numbytes += 2; } if(current_name != 'e' && current_length > 255) { @@ -306,103 +390,90 @@ int bitparse_find_section(char section_name, char **section_start, unsigned int if(current_name == section_name) { /* Found it */ - *section_start = pos; *section_length = current_length; result = 1; break; } - pos += current_length; /* Skip section */ + for (uint16_t i = 0; i < current_length && numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH; i++) { + get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer); + numbytes++; + } } return result; } -//----------------------------------------------------------------------------- -// Find out which FPGA image format is stored in flash, then call DownloadFPGA -// with the right parameters to download the image -//----------------------------------------------------------------------------- -extern char _binary_fpga_bit_start, _binary_fpga_bit_end; -void FpgaDownloadAndGo(void) + +//---------------------------------------------------------------------------- +// Check which FPGA image is currently loaded (if any). If necessary +// decompress and load the correct (HF or LF) image to the FPGA +//---------------------------------------------------------------------------- +void FpgaDownloadAndGo(int bitstream_version) { - /* Check for the new flash image format: Should have the .bit file at &_binary_fpga_bit_start - */ - if(bitparse_init(&_binary_fpga_bit_start, &_binary_fpga_bit_end)) { - /* Successfully initialized the .bit parser. Find the 'e' section and - * send its contents to the FPGA. - */ - char *bitstream_start; - unsigned int bitstream_length; - if(bitparse_find_section('e', &bitstream_start, &bitstream_length)) { - DownloadFPGA(bitstream_start, bitstream_length, 0); - - return; /* All done */ - } + z_stream compressed_fpga_stream; + uint8_t output_buffer[OUTPUT_BUFFER_LEN] = {0x00}; + + // check whether or not the bitstream is already loaded + if (downloaded_bitstream == bitstream_version) { + FpgaEnableTracing(); + return; } - /* Fallback for the old flash image format: Check for the magic marker 0xFFFFFFFF - * 0xAA995566 at address 0x102000. This is raw bitstream with a size of 336,768 bits - * = 10,524 uint32_t, stored as uint32_t e.g. little-endian in memory, but each DWORD - * is still to be transmitted in MSBit first order. Set the invert flag to indicate - * that the DownloadFPGA function should invert every 4 byte sequence when doing - * the bytewise download. - */ - if( *(uint32_t*)0x102000 == 0xFFFFFFFF && *(uint32_t*)0x102004 == 0xAA995566 ) - DownloadFPGA((char*)0x102000, 10524*4, 1); -} + // make sure that we have enough memory to decompress + BigBuf_free(); BigBuf_Clear_ext(false); -void FpgaGatherVersion(char *dst, int len) -{ - char *fpga_info; - unsigned int fpga_info_len; - dst[0] = 0; - if(!bitparse_find_section('e', &fpga_info, &fpga_info_len)) { - strncat(dst, "FPGA image: legacy image without version information", len-1); - } else { - strncat(dst, "FPGA image built", len-1); - /* USB packets only have 48 bytes data payload, so be terse */ -#if 0 - if(bitparse_find_section('a', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) { - strncat(dst, " from ", len-1); - strncat(dst, fpga_info, len-1); - } - if(bitparse_find_section('b', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) { - strncat(dst, " for ", len-1); - strncat(dst, fpga_info, len-1); - } -#endif - if(bitparse_find_section('c', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) { - strncat(dst, " on ", len-1); - strncat(dst, fpga_info, len-1); - } - if(bitparse_find_section('d', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) { - strncat(dst, " at ", len-1); - strncat(dst, fpga_info, len-1); - } + if (!reset_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer)) { + return; + } + + unsigned int bitstream_length; + if (bitparse_find_section(bitstream_version, 'e', &bitstream_length, &compressed_fpga_stream, output_buffer)) { + DownloadFPGA(bitstream_version, bitstream_length, &compressed_fpga_stream, output_buffer); + downloaded_bitstream = bitstream_version; } + + inflateEnd(&compressed_fpga_stream); + + // turn off antenna + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + + // free eventually allocated BigBuf memory + BigBuf_free(); BigBuf_Clear_ext(false); } + //----------------------------------------------------------------------------- // Send a 16 bit command/data pair to the FPGA. // The bit format is: C3 C2 C1 C0 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 // where C is the 4 bit command and D is the 12 bit data //----------------------------------------------------------------------------- -void FpgaSendCommand(uint16_t cmd, uint16_t v) -{ +void FpgaSendCommand(uint16_t cmd, uint16_t v) { SetupSpi(SPI_FPGA_MODE); - while ((AT91C_BASE_SPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0); // wait for the transfer to complete - AT91C_BASE_SPI->SPI_TDR = AT91C_SPI_LASTXFER | cmd | v; // send the data + AT91C_BASE_SPI->SPI_TDR = AT91C_SPI_LASTXFER | cmd | v; // write the data to be sent + while ((AT91C_BASE_SPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0); // wait for the transfer to complete } + //----------------------------------------------------------------------------- // Write the FPGA setup word (that determines what mode the logic is in, read // vs. clone vs. etc.). This is now a special case of FpgaSendCommand() to // avoid changing this function's occurence everywhere in the source code. //----------------------------------------------------------------------------- -void FpgaWriteConfWord(uint8_t v) -{ +void FpgaWriteConfWord(uint16_t v) { FpgaSendCommand(FPGA_CMD_SET_CONFREG, v); } +//----------------------------------------------------------------------------- +// enable/disable FPGA internal tracing +//----------------------------------------------------------------------------- +void FpgaEnableTracing(void) { + FpgaSendCommand(FPGA_CMD_TRACE_ENABLE, 1); +} + +void FpgaDisableTracing(void) { + FpgaSendCommand(FPGA_CMD_TRACE_ENABLE, 0); +} + //----------------------------------------------------------------------------- // Set up the CMOS switches that mux the ADC: four switches, independently // closable, but should only close one at a time. Not an FPGA thing, but @@ -429,3 +500,12 @@ void SetAdcMuxFor(uint32_t whichGpio) HIGH(whichGpio); } + +void Fpga_print_status(void) { + Dbprintf("Currently loaded FPGA image:"); + Dbprintf(" %s", fpga_version_information[downloaded_bitstream-1]); +} + +int FpgaGetCurrent() { + return downloaded_bitstream; +}