X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/7d5ebac99397fe7661760259377a4f222fdb92cb..6792435739c20c270ca3cc4259e5427783ae5fe1:/common/usb_cdc.c?ds=inline diff --git a/common/usb_cdc.c b/common/usb_cdc.c index ccbb3c50..acd16b4e 100644 --- a/common/usb_cdc.c +++ b/common/usb_cdc.c @@ -33,34 +33,48 @@ */ #include "usb_cdc.h" + +#include +#include +#include + +#include "common.h" +#include "at91sam7s512.h" #include "config_gpio.h" -#define MIN(a, b) (((a) < (b)) ? (a) : (b)) -#define MAX(a, b) (((a) > (b)) ? (a) : (b)) -#define AT91C_EP_IN_SIZE 0x40 +#define AT91C_EP_CONTROL 0 #define AT91C_EP_OUT 1 -#define AT91C_EP_OUT_SIZE 0x40 #define AT91C_EP_IN 2 +#define AT91C_EP_NOTIFY 3 +#define AT91C_EP_OUT_SIZE 0x40 +#define AT91C_EP_IN_SIZE 0x40 + +// Language must always be 0. +#define STR_LANGUAGE_CODES 0x00 +#define STR_MANUFACTURER 0x01 +#define STR_PRODUCT 0x02 -const char devDescriptor[] = { + +static const char devDescriptor[] = { /* Device descriptor */ 0x12, // bLength 0x01, // bDescriptorType - 0x10,0x01, // Complies with USB Spec. Release (0110h = release 1.10) - 0x02, // bDeviceClass: CDC class code - 0x00, // bDeviceSubclass: CDC class sub code - 0x00, // bDeviceProtocol: CDC Device protocol + 0x00,0x02, // Complies with USB Spec. Release (0200h = release 2.0) + 0x02, // bDeviceClass: (Communication Device Class) + 0x00, // bDeviceSubclass: (unused at this time) + 0x00, // bDeviceProtocol: (unused at this time) 0x08, // bMaxPacketSize0 - 0x2d,0x2d, // Vendor ID (--) - 0x4d,0x50, // Product ID (PM), transmitted in reverse + 0xc4,0x9a, // Vendor ID (0x9ac4 = J. Westhues) + 0x8f,0x4b, // Product ID (0x4b8f = Proxmark-3 RFID Instrument) 0x01,0x00, // Device release number (0001) - 0x01, // iManufacturer // 0x01 - 0x00, // iProduct - 0x00, // SerialNumber + STR_MANUFACTURER, // iManufacturer + STR_PRODUCT, // iProduct + 0x00, // iSerialNumber 0x01 // bNumConfigs }; -const char cfgDescriptor[] = { + +static const char cfgDescriptor[] = { /* ============== CONFIGURATION 1 =========== */ /* Configuration 1 descriptor */ 0x09, // CbLength @@ -70,106 +84,168 @@ const char cfgDescriptor[] = { 0x02, // CbNumInterfaces 0x01, // CbConfigurationValue 0x00, // CiConfiguration - 0xC0, // CbmAttributes 0xA0 - 0x00, // CMaxPower + 0x80, // CbmAttributes (Bus Powered) + 0x4B, // CMaxPower (150mA max current drawn from bus) - /* Communication Class Interface Descriptor Requirement */ + /* Interface 0 Descriptor: Communication Class Interface */ 0x09, // bLength 0x04, // bDescriptorType 0x00, // bInterfaceNumber 0x00, // bAlternateSetting 0x01, // bNumEndpoints - 0x02, // bInterfaceClass - 0x02, // bInterfaceSubclass - 0x00, // bInterfaceProtocol + 0x02, // bInterfaceClass: Communication Interface Class + 0x02, // bInterfaceSubclass: Abstract Control Model + 0x01, // bInterfaceProtocol: Common AT Commands, V.25ter 0x00, // iInterface /* Header Functional Descriptor */ 0x05, // bFunction Length - 0x24, // bDescriptor type: CS_INTERFACE - 0x00, // bDescriptor subtype: Header Func Desc + 0x24, // bDescriptor type: CS_INTERFACE + 0x00, // bDescriptor subtype: Header Functional Descriptor 0x10, // bcdCDC:1.1 0x01, /* ACM Functional Descriptor */ 0x04, // bFunctionLength - 0x24, // bDescriptor Type: CS_INTERFACE - 0x02, // bDescriptor Subtype: ACM Func Desc - 0x00, // bmCapabilities + 0x24, // bDescriptor Type: CS_INTERFACE + 0x02, // bDescriptor Subtype: Abstract Control Management Functional Descriptor + 0x02, // bmCapabilities: D1: Device supports the request combination of Set_Line_Coding, Set_Control_Line_State, Get_Line_Coding, and the notification Serial_State /* Union Functional Descriptor */ 0x05, // bFunctionLength - 0x24, // bDescriptorType: CS_INTERFACE - 0x06, // bDescriptor Subtype: Union Func Desc - 0x00, // bMasterInterface: Communication Class Interface - 0x01, // bSlaveInterface0: Data Class Interface + 0x24, // bDescriptorType: CS_INTERFACE + 0x06, // bDescriptor Subtype: Union Functional Descriptor + 0x00, // bMasterInterface: Communication Class Interface + 0x01, // bSlaveInterface0: Data Class Interface /* Call Management Functional Descriptor */ 0x05, // bFunctionLength - 0x24, // bDescriptor Type: CS_INTERFACE - 0x01, // bDescriptor Subtype: Call Management Func Desc - 0x00, // bmCapabilities: D1 + D0 - 0x01, // bDataInterface: Data Class Interface 1 + 0x24, // bDescriptor Type: CS_INTERFACE + 0x01, // bDescriptor Subtype: Call Management Functional Descriptor + 0x00, // bmCapabilities: Device sends/receives call management information only over the Communication Class interface. Device does not handle call management itself + 0x01, // bDataInterface: Data Class Interface 1 /* Endpoint 1 descriptor */ 0x07, // bLength 0x05, // bDescriptorType - 0x83, // bEndpointAddress, Endpoint 03 - IN - 0x03, // bmAttributes INT - 0x08, // wMaxPacketSize + 0x83, // bEndpointAddress: Endpoint 03 - IN + 0x03, // bmAttributes: INT + 0x08, // wMaxPacketSize: 8 0x00, 0xFF, // bInterval - /* Data Class Interface Descriptor Requirement */ + /* Interface 1 Descriptor: Data Class Interface */ 0x09, // bLength 0x04, // bDescriptorType 0x01, // bInterfaceNumber 0x00, // bAlternateSetting 0x02, // bNumEndpoints - 0x0A, // bInterfaceClass - 0x00, // bInterfaceSubclass - 0x00, // bInterfaceProtocol + 0x0A, // bInterfaceClass: Data Interface Class + 0x00, // bInterfaceSubclass: not used + 0x00, // bInterfaceProtocol: No class specific protocol required) 0x00, // iInterface - /* First alternate setting */ /* Endpoint 1 descriptor */ 0x07, // bLength 0x05, // bDescriptorType - 0x01, // bEndpointAddress, Endpoint 01 - OUT - 0x02, // bmAttributes BULK - AT91C_EP_OUT_SIZE, // wMaxPacketSize + 0x01, // bEndpointAddress: Endpoint 01 - OUT + 0x02, // bmAttributes: BULK + AT91C_EP_OUT_SIZE, // wMaxPacketSize 0x00, 0x00, // bInterval /* Endpoint 2 descriptor */ 0x07, // bLength 0x05, // bDescriptorType - 0x82, // bEndpointAddress, Endpoint 02 - IN - 0x02, // bmAttributes BULK + 0x82, // bEndpointAddress: Endpoint 02 - IN + 0x02, // bmAttributes: BULK AT91C_EP_IN_SIZE, // wMaxPacketSize 0x00, 0x00 // bInterval }; -const char strDescriptor[] = { - 26, // Length - 0x03, // Type is string - 'p', 0x00, - 'r', 0x00, - 'o', 0x00, - 'x', 0x00, - 'm', 0x00, - 'a', 0x00, - 'r', 0x00, - 'k', 0x00, - '.', 0x00, - 'o', 0x00, - 'r', 0x00, - 'g', 0x00, + +static const char StrDescLanguageCodes[] = { + 4, // Length + 0x03, // Type is string + 0x09, 0x04 // supported language Code 0 = 0x0409 (English) +}; + + +// Note: ModemManager (Linux) ignores Proxmark3 devices by matching the +// manufacturer string "proxmark.org". Don't change this. +static const char StrDescManufacturer[] = { + 26, // Length + 0x03, // Type is string + 'p', 0x00, + 'r', 0x00, + 'o', 0x00, + 'x', 0x00, + 'm', 0x00, + 'a', 0x00, + 'r', 0x00, + 'k', 0x00, + '.', 0x00, + 'o', 0x00, + 'r', 0x00, + 'g', 0x00 +}; + + +static const char StrDescProduct[] = { + 20, // Length + 0x03, // Type is string + 'p', 0x00, + 'r', 0x00, + 'o', 0x00, + 'x', 0x00, + 'm', 0x00, + 'a', 0x00, + 'r', 0x00, + 'k', 0x00, + '3', 0x00 }; -/* USB standard request code */ +static const char* getStringDescriptor(uint8_t idx) { + switch (idx) { + case STR_LANGUAGE_CODES: + return StrDescLanguageCodes; + case STR_MANUFACTURER: + return StrDescManufacturer; + case STR_PRODUCT: + return StrDescProduct; + default: + return NULL; + } +} + + +// Bitmap for all status bits in CSR which must be written as 1 to cause no effect +#define REG_NO_EFFECT_1_ALL (AT91C_UDP_RX_DATA_BK0 | AT91C_UDP_RX_DATA_BK1 | AT91C_UDP_STALLSENT | AT91C_UDP_RXSETUP | AT91C_UDP_TXCOMP) + + +// Clear flags in the UDP_CSR register +#define UDP_CLEAR_EP_FLAGS(endpoint, flags) { \ + volatile unsigned int reg; \ + reg = AT91C_BASE_UDP->UDP_CSR[(endpoint)]; \ + reg |= REG_NO_EFFECT_1_ALL; \ + reg &= ~(flags); \ + AT91C_BASE_UDP->UDP_CSR[(endpoint)] = reg; \ +} + + +// Set flags in the UDP_CSR register +#define UDP_SET_EP_FLAGS(endpoint, flags) { \ + volatile unsigned int reg; \ + reg = AT91C_BASE_UDP->UDP_CSR[(endpoint)]; \ + reg |= REG_NO_EFFECT_1_ALL; \ + reg |= (flags); \ + AT91C_BASE_UDP->UDP_CSR[(endpoint)] = reg; \ +} + + +/* USB standard request codes */ #define STD_GET_STATUS_ZERO 0x0080 #define STD_GET_STATUS_INTERFACE 0x0081 #define STD_GET_STATUS_ENDPOINT 0x0082 @@ -196,6 +272,7 @@ const char strDescriptor[] = { #define SET_LINE_CODING 0x2021 #define SET_CONTROL_LINE_STATE 0x2221 + typedef struct { unsigned int dwDTERRate; char bCharFormat; @@ -203,177 +280,86 @@ typedef struct { char bDataBits; } AT91S_CDC_LINE_CODING, *AT91PS_CDC_LINE_CODING; -AT91S_CDC_LINE_CODING line = { + +static AT91S_CDC_LINE_CODING line = { 115200, // baudrate 0, // 1 Stop Bit 0, // None Parity 8}; // 8 Data bits -void AT91F_CDC_Enumerate(); -AT91PS_UDP pUdp = AT91C_BASE_UDP; -byte_t btConfiguration = 0; -byte_t btConnection = 0; -byte_t btReceiveBank = AT91C_UDP_RX_DATA_BK0; +static uint8_t btConfiguration = 0; +static uint8_t btConnection = 0; +static uint8_t btReceiveBank = AT91C_UDP_RX_DATA_BK0; + //*---------------------------------------------------------------------------- //* \fn usb_disable //* \brief This function deactivates the USB device //*---------------------------------------------------------------------------- void usb_disable() { - // Disconnect the USB device - AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU; - - // Clear all lingering interrupts - if(pUdp->UDP_ISR & AT91C_UDP_ENDBUSRES) { - pUdp->UDP_ICR = AT91C_UDP_ENDBUSRES; - } + // Disconnect the USB device + AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU; + + // Clear all lingering interrupts + if (AT91C_BASE_UDP->UDP_ISR & AT91C_UDP_ENDBUSRES) { + AT91C_BASE_UDP->UDP_ICR = AT91C_UDP_ENDBUSRES; + } } + //*---------------------------------------------------------------------------- //* \fn usb_enable //* \brief This function Activates the USB device //*---------------------------------------------------------------------------- void usb_enable() { - // Set the PLL USB Divider - AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ; - - // Specific Chip USB Initialisation - // Enables the 48MHz USB clock UDPCK and System Peripheral USB Clock - AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UDP; - AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_UDP); - - // Enable UDP PullUp (USB_DP_PUP) : enable & Clear of the corresponding PIO - // Set in PIO mode and Configure in Output - AT91C_BASE_PIOA->PIO_PER = GPIO_USB_PU; // Set in PIO mode - AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; // Configure as Output - - // Clear for set the Pullup resistor - AT91C_BASE_PIOA->PIO_CODR = GPIO_USB_PU; - - // Disconnect and reconnect USB controller for 100ms - usb_disable(); - - // Wait for a short while - for (volatile size_t i=0; i<0x100000; i++); - - // Reconnect USB reconnect - AT91C_BASE_PIOA->PIO_SODR = GPIO_USB_PU; - AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; -} + // Set the PLL USB Divider + AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ; -//*---------------------------------------------------------------------------- -//* \fn usb_check -//* \brief Test if the device is configured and handle enumeration -//*---------------------------------------------------------------------------- -bool usb_check() { - AT91_REG isr = pUdp->UDP_ISR; - - if (isr & AT91C_UDP_ENDBUSRES) { - pUdp->UDP_ICR = AT91C_UDP_ENDBUSRES; - // reset all endpoints - pUdp->UDP_RSTEP = (unsigned int)-1; - pUdp->UDP_RSTEP = 0; - // Enable the function - pUdp->UDP_FADDR = AT91C_UDP_FEN; - // Configure endpoint 0 - pUdp->UDP_CSR[0] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL); - } - else if (isr & AT91C_UDP_EPINT0) { - pUdp->UDP_ICR = AT91C_UDP_EPINT0; - AT91F_CDC_Enumerate(); - } - return (btConfiguration) ? true : false; -} + // Specific Chip USB Initialisation + // Enables the 48MHz USB clock UDPCK and System Peripheral USB Clock + AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UDP; + AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_UDP); + // Enable UDP PullUp (USB_DP_PUP) : enable & Clear of the corresponding PIO + // Set in PIO mode and Configure in Output + AT91C_BASE_PIOA->PIO_PER = GPIO_USB_PU; // Set in PIO mode + AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; // Configure as Output -bool usb_poll() -{ - if (!usb_check()) return false; - return (pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank); -} + // Clear for set the Pullup resistor + AT91C_BASE_PIOA->PIO_CODR = GPIO_USB_PU; -//*---------------------------------------------------------------------------- -//* \fn usb_read -//* \brief Read available data from Endpoint OUT -//*---------------------------------------------------------------------------- -uint32_t usb_read(byte_t* data, size_t len) { - byte_t bank = btReceiveBank; - uint32_t packetSize, nbBytesRcv = 0; - uint32_t time_out = 0; - - while (len) { - if (!usb_check()) break; + // Disconnect and reconnect USB controller for 100ms + usb_disable(); - if ( pUdp->UDP_CSR[AT91C_EP_OUT] & bank ) { - packetSize = MIN(pUdp->UDP_CSR[AT91C_EP_OUT] >> 16, len); - len -= packetSize; - while(packetSize--) - data[nbBytesRcv++] = pUdp->UDP_FDR[AT91C_EP_OUT]; - pUdp->UDP_CSR[AT91C_EP_OUT] &= ~(bank); - if (bank == AT91C_UDP_RX_DATA_BK0) { - bank = AT91C_UDP_RX_DATA_BK1; - } else { - bank = AT91C_UDP_RX_DATA_BK0; - } - } - if (time_out++ == 0x1fff) break; - } + // Wait for a short while + for (volatile size_t i = 0; i < 0x100000; i++); - btReceiveBank = bank; - return nbBytesRcv; + // Reconnect USB reconnect + AT91C_BASE_PIOA->PIO_SODR = GPIO_USB_PU; + AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; } + //*---------------------------------------------------------------------------- -//* \fn usb_write -//* \brief Send through endpoint 2 +//* \fn AT91F_USB_SendZlp +//* \brief Send zero length packet through an endpoint //*---------------------------------------------------------------------------- -uint32_t usb_write(const byte_t* data, const size_t len) { - size_t length = len; - uint32_t cpt = 0; - - if (!length) return 0; - if (!usb_check()) return 0; - - // Send the first packet - cpt = MIN(length, AT91C_EP_IN_SIZE-1); - length -= cpt; - while (cpt--) pUdp->UDP_FDR[AT91C_EP_IN] = *data++; - pUdp->UDP_CSR[AT91C_EP_IN] |= AT91C_UDP_TXPKTRDY; - - while (length) { - // Fill the second bank - cpt = MIN(length, AT91C_EP_IN_SIZE-1); - length -= cpt; - while (cpt--) pUdp->UDP_FDR[AT91C_EP_IN] = *data++; - // Wait for the the first bank to be sent - while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) { - if (!usb_check()) return length; - } - pUdp->UDP_CSR[AT91C_EP_IN] &= ~(AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP); - pUdp->UDP_CSR[AT91C_EP_IN] |= AT91C_UDP_TXPKTRDY; - } - - // Wait for the end of transfer - while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) { - if (!usb_check()) return length; - } - - pUdp->UDP_CSR[AT91C_EP_IN] &= ~(AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP); - - return length; +static void AT91F_USB_SendZlp(uint8_t endpoint) { + UDP_SET_EP_FLAGS(endpoint, AT91C_UDP_TXPKTRDY); + while (!(AT91C_BASE_UDP->UDP_CSR[endpoint] & AT91C_UDP_TXCOMP)) + /* wait */; + UDP_CLEAR_EP_FLAGS(endpoint, AT91C_UDP_TXCOMP); + while (AT91C_BASE_UDP->UDP_CSR[endpoint] & AT91C_UDP_TXCOMP) + /* wait */; } + //*---------------------------------------------------------------------------- //* \fn AT91F_USB_SendData //* \brief Send Data through the control endpoint //*---------------------------------------------------------------------------- -unsigned int csrTab[100] = {0x00}; -unsigned char csrIdx = 0; - -static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, uint32_t length) { +static void AT91F_USB_SendData(const char *pData, uint32_t length) { uint32_t cpt = 0; AT91_REG csr; @@ -382,182 +368,396 @@ static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, uint32_t leng length -= cpt; while (cpt--) - pUdp->UDP_FDR[0] = *pData++; + AT91C_BASE_UDP->UDP_FDR[0] = *pData++; - if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) { - pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP); + if (AT91C_BASE_UDP->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) { + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP); + while (AT91C_BASE_UDP->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) + /* wait */; } - pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY; + UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY); do { - csr = pUdp->UDP_CSR[0]; + csr = AT91C_BASE_UDP->UDP_CSR[AT91C_EP_CONTROL]; // Data IN stage has been stopped by a status OUT if (csr & AT91C_UDP_RX_DATA_BK0) { - pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0); + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0); return; } - } while ( !(csr & AT91C_UDP_TXCOMP) ); + } while (!(csr & AT91C_UDP_TXCOMP)); } while (length); - if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) { - pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP); + if (AT91C_BASE_UDP->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) { + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP); + while (AT91C_BASE_UDP->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) + /* wait */; } } -//*---------------------------------------------------------------------------- -//* \fn AT91F_USB_SendZlp -//* \brief Send zero length packet through the control endpoint -//*---------------------------------------------------------------------------- -void AT91F_USB_SendZlp(AT91PS_UDP pUdp) { - pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY; - while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) ); - pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP); -} //*---------------------------------------------------------------------------- //* \fn AT91F_USB_SendStall //* \brief Stall the control endpoint //*---------------------------------------------------------------------------- -void AT91F_USB_SendStall(AT91PS_UDP pUdp) { - pUdp->UDP_CSR[0] |= AT91C_UDP_FORCESTALL; - while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_ISOERROR) ); - pUdp->UDP_CSR[0] &= ~(AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR); - while (pUdp->UDP_CSR[0] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR)); +static void AT91F_USB_SendStall(void) { + UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL); + while (!(AT91C_BASE_UDP->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_ISOERROR)) + /* wait */; + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR); + while (AT91C_BASE_UDP->UDP_CSR[AT91C_EP_CONTROL] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR)) + /* wait */; } + //*---------------------------------------------------------------------------- //* \fn AT91F_CDC_Enumerate //* \brief This function is a callback invoked when a SETUP packet is received //*---------------------------------------------------------------------------- -void AT91F_CDC_Enumerate() { - byte_t bmRequestType, bRequest; +static void AT91F_CDC_Enumerate() { + uint8_t bmRequestType, bRequest; uint16_t wValue, wIndex, wLength, wStatus; - if ( !(pUdp->UDP_CSR[0] & AT91C_UDP_RXSETUP) ) + if (!(AT91C_BASE_UDP->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP)) return; - bmRequestType = pUdp->UDP_FDR[0]; - bRequest = pUdp->UDP_FDR[0]; - wValue = (pUdp->UDP_FDR[0] & 0xFF); - wValue |= (pUdp->UDP_FDR[0] << 8); - wIndex = (pUdp->UDP_FDR[0] & 0xFF); - wIndex |= (pUdp->UDP_FDR[0] << 8); - wLength = (pUdp->UDP_FDR[0] & 0xFF); - wLength |= (pUdp->UDP_FDR[0] << 8); - - if (bmRequestType & 0x80) { - pUdp->UDP_CSR[0] |= AT91C_UDP_DIR; - while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_DIR) ); + bmRequestType = AT91C_BASE_UDP->UDP_FDR[AT91C_EP_CONTROL]; + bRequest = AT91C_BASE_UDP->UDP_FDR[AT91C_EP_CONTROL]; + wValue = (AT91C_BASE_UDP->UDP_FDR[AT91C_EP_CONTROL] & 0xFF); + wValue |= (AT91C_BASE_UDP->UDP_FDR[AT91C_EP_CONTROL] << 8); + wIndex = (AT91C_BASE_UDP->UDP_FDR[AT91C_EP_CONTROL] & 0xFF); + wIndex |= (AT91C_BASE_UDP->UDP_FDR[AT91C_EP_CONTROL] << 8); + wLength = (AT91C_BASE_UDP->UDP_FDR[AT91C_EP_CONTROL] & 0xFF); + wLength |= (AT91C_BASE_UDP->UDP_FDR[AT91C_EP_CONTROL] << 8); + + if (bmRequestType & 0x80) { // Data Phase Transfer Direction Device to Host + UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_DIR); + while (!(AT91C_BASE_UDP->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_DIR)) + /* wait */; } - pUdp->UDP_CSR[0] &= ~AT91C_UDP_RXSETUP; - while ( (pUdp->UDP_CSR[0] & AT91C_UDP_RXSETUP) ); + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RXSETUP); + while (AT91C_BASE_UDP->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP) + /* wait */; // Handle supported standard device request Cf Table 9-3 in USB specification Rev 1.1 switch ((bRequest << 8) | bmRequestType) { case STD_GET_DESCRIPTOR: if (wValue == 0x100) // Return Device Descriptor - AT91F_USB_SendData(pUdp, devDescriptor, MIN(sizeof(devDescriptor), wLength)); + AT91F_USB_SendData(devDescriptor, MIN(sizeof(devDescriptor), wLength)); else if (wValue == 0x200) // Return Configuration Descriptor - AT91F_USB_SendData(pUdp, cfgDescriptor, MIN(sizeof(cfgDescriptor), wLength)); - else if ((wValue & 0x300) == 0x300) // Return String Descriptor - AT91F_USB_SendData(pUdp, strDescriptor, MIN(sizeof(strDescriptor), wLength)); + AT91F_USB_SendData(cfgDescriptor, MIN(sizeof(cfgDescriptor), wLength)); + else if ((wValue & 0xF00) == 0x300) { // Return String Descriptor + const char *strDescriptor = getStringDescriptor(wValue & 0xff); + if (strDescriptor != NULL) { + AT91F_USB_SendData(strDescriptor, MIN(strDescriptor[0], wLength)); + } else { + AT91F_USB_SendStall(); + } + } else - AT91F_USB_SendStall(pUdp); + AT91F_USB_SendStall(); break; case STD_SET_ADDRESS: - AT91F_USB_SendZlp(pUdp); - pUdp->UDP_FADDR = (AT91C_UDP_FEN | wValue); - pUdp->UDP_GLBSTATE = (wValue) ? AT91C_UDP_FADDEN : 0; + AT91F_USB_SendZlp(AT91C_EP_CONTROL); + AT91C_BASE_UDP->UDP_FADDR = (AT91C_UDP_FEN | wValue); + AT91C_BASE_UDP->UDP_GLBSTATE = (wValue) ? AT91C_UDP_FADDEN : 0; break; case STD_SET_CONFIGURATION: btConfiguration = wValue; - AT91F_USB_SendZlp(pUdp); - pUdp->UDP_GLBSTATE = (wValue) ? AT91C_UDP_CONFG : AT91C_UDP_FADDEN; - pUdp->UDP_CSR[1] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT) : 0; - pUdp->UDP_CSR[2] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN) : 0; - pUdp->UDP_CSR[3] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN) : 0; + AT91F_USB_SendZlp(AT91C_EP_CONTROL); + AT91C_BASE_UDP->UDP_GLBSTATE = (wValue) ? AT91C_UDP_CONFG : AT91C_UDP_FADDEN; + AT91C_BASE_UDP->UDP_CSR[AT91C_EP_OUT] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT) : 0; + AT91C_BASE_UDP->UDP_CSR[AT91C_EP_IN] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN) : 0; + AT91C_BASE_UDP->UDP_CSR[AT91C_EP_NOTIFY] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN) : 0; break; case STD_GET_CONFIGURATION: - AT91F_USB_SendData(pUdp, (char *) &(btConfiguration), sizeof(btConfiguration)); + AT91F_USB_SendData((char *) &(btConfiguration), sizeof(btConfiguration)); break; case STD_GET_STATUS_ZERO: - wStatus = 0; - AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); + wStatus = 0; // Device is Bus powered, remote wakeup disabled + AT91F_USB_SendData((char *) &wStatus, sizeof(wStatus)); break; case STD_GET_STATUS_INTERFACE: - wStatus = 0; - AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); + wStatus = 0; // reserved for future use + AT91F_USB_SendData((char *) &wStatus, sizeof(wStatus)); break; case STD_GET_STATUS_ENDPOINT: wStatus = 0; wIndex &= 0x0F; - if ((pUdp->UDP_GLBSTATE & AT91C_UDP_CONFG) && (wIndex <= 3)) { - wStatus = (pUdp->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1; - AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); - } - else if ((pUdp->UDP_GLBSTATE & AT91C_UDP_FADDEN) && (wIndex == 0)) { - wStatus = (pUdp->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1; - AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); - } - else - AT91F_USB_SendStall(pUdp); + if ((AT91C_BASE_UDP->UDP_GLBSTATE & AT91C_UDP_CONFG) && (wIndex <= AT91C_EP_NOTIFY)) { + wStatus = (AT91C_BASE_UDP->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1; + AT91F_USB_SendData((char *) &wStatus, sizeof(wStatus)); + } else if ((AT91C_BASE_UDP->UDP_GLBSTATE & AT91C_UDP_FADDEN) && (wIndex == AT91C_EP_CONTROL)) { + wStatus = (AT91C_BASE_UDP->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1; + AT91F_USB_SendData((char *) &wStatus, sizeof(wStatus)); + } else + AT91F_USB_SendStall(); break; case STD_SET_FEATURE_ZERO: - AT91F_USB_SendStall(pUdp); - break; + AT91F_USB_SendStall(); + break; case STD_SET_FEATURE_INTERFACE: - AT91F_USB_SendZlp(pUdp); + AT91F_USB_SendZlp(AT91C_EP_CONTROL); break; case STD_SET_FEATURE_ENDPOINT: wIndex &= 0x0F; - if ((wValue == 0) && wIndex && (wIndex <= 3)) { - pUdp->UDP_CSR[wIndex] = 0; - AT91F_USB_SendZlp(pUdp); - } - else - AT91F_USB_SendStall(pUdp); + if ((wValue == 0) && (wIndex >= AT91C_EP_OUT) && (wIndex <= AT91C_EP_NOTIFY)) { + AT91C_BASE_UDP->UDP_CSR[wIndex] = 0; + AT91F_USB_SendZlp(AT91C_EP_CONTROL); + } else + AT91F_USB_SendStall(); break; case STD_CLEAR_FEATURE_ZERO: - AT91F_USB_SendStall(pUdp); - break; + AT91F_USB_SendStall(); + break; case STD_CLEAR_FEATURE_INTERFACE: - AT91F_USB_SendZlp(pUdp); + AT91F_USB_SendZlp(AT91C_EP_CONTROL); break; case STD_CLEAR_FEATURE_ENDPOINT: wIndex &= 0x0F; - if ((wValue == 0) && wIndex && (wIndex <= 3)) { - if (wIndex == 1) - pUdp->UDP_CSR[1] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT); - else if (wIndex == 2) - pUdp->UDP_CSR[2] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN); - else if (wIndex == 3) - pUdp->UDP_CSR[3] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_ISO_IN); - AT91F_USB_SendZlp(pUdp); + if ((wValue == 0) && (wIndex >= AT91C_EP_OUT) && (wIndex <= AT91C_EP_NOTIFY)) { + if (wIndex == AT91C_EP_OUT) + AT91C_BASE_UDP->UDP_CSR[AT91C_EP_OUT] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT); + else if (wIndex == AT91C_EP_IN) + AT91C_BASE_UDP->UDP_CSR[AT91C_EP_IN] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN); + else if (wIndex == AT91C_EP_NOTIFY) + AT91C_BASE_UDP->UDP_CSR[AT91C_EP_NOTIFY] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN); + AT91F_USB_SendZlp(AT91C_EP_CONTROL); } else - AT91F_USB_SendStall(pUdp); + AT91F_USB_SendStall(); break; // handle CDC class requests case SET_LINE_CODING: - while ( !(pUdp->UDP_CSR[0] & AT91C_UDP_RX_DATA_BK0) ); - pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0); - AT91F_USB_SendZlp(pUdp); + while (!(AT91C_BASE_UDP->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RX_DATA_BK0)) + /* wait */; + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0); + AT91F_USB_SendZlp(AT91C_EP_CONTROL); break; case GET_LINE_CODING: - AT91F_USB_SendData(pUdp, (char *) &line, MIN(sizeof(line), wLength)); + AT91F_USB_SendData((char *) &line, MIN(sizeof(line), wLength)); break; case SET_CONTROL_LINE_STATE: btConnection = wValue; - AT91F_USB_SendZlp(pUdp); + AT91F_USB_SendZlp(AT91C_EP_CONTROL); break; default: - AT91F_USB_SendStall(pUdp); - break; + AT91F_USB_SendStall(); + break; + } +} + + +//*---------------------------------------------------------------------------- +//* \fn usb_check +//* \brief Test if the device is configured and handle enumeration +//*---------------------------------------------------------------------------- +static bool usb_check() { + AT91_REG isr = AT91C_BASE_UDP->UDP_ISR; + + if (isr & AT91C_UDP_ENDBUSRES) { + AT91C_BASE_UDP->UDP_ICR = AT91C_UDP_ENDBUSRES; + // reset all endpoints + AT91C_BASE_UDP->UDP_RSTEP = (unsigned int)-1; + AT91C_BASE_UDP->UDP_RSTEP = 0; + // Enable the function + AT91C_BASE_UDP->UDP_FADDR = AT91C_UDP_FEN; + // Configure endpoint 0 + AT91C_BASE_UDP->UDP_CSR[AT91C_EP_CONTROL] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL); + } else if (isr & AT91C_UDP_EPINT0) { + AT91C_BASE_UDP->UDP_ICR = AT91C_UDP_EPINT0; + AT91F_CDC_Enumerate(); } + return (btConfiguration) ? true : false; +} + + +bool usb_poll() { + if (!usb_check()) return false; + return (AT91C_BASE_UDP->UDP_CSR[AT91C_EP_OUT] & btReceiveBank); } + + +/** + In github PR #129, some users appears to get a false positive from + usb_poll, which returns true, but the usb_read operation + still returns 0. + This check is basically the same as above, but also checks + that the length available to read is non-zero, thus hopefully fixes the + bug. +**/ +bool usb_poll_validate_length() { + if (!usb_check()) return false; + if (!(AT91C_BASE_UDP->UDP_CSR[AT91C_EP_OUT] & btReceiveBank)) return false; + return (AT91C_BASE_UDP->UDP_CSR[AT91C_EP_OUT] >> 16) > 0; +} + + +//*---------------------------------------------------------------------------- +//* \fn usb_read +//* \brief Read available data from Endpoint OUT +//*---------------------------------------------------------------------------- +static uint32_t usb_read(uint8_t* data, size_t len) { + uint8_t bank = btReceiveBank; + uint32_t packetSize, nbBytesRcv = 0; + uint32_t time_out = 0; + + while (len) { + if (!usb_check()) break; + + if ( AT91C_BASE_UDP->UDP_CSR[AT91C_EP_OUT] & bank ) { + packetSize = MIN(AT91C_BASE_UDP->UDP_CSR[AT91C_EP_OUT] >> 16, len); + len -= packetSize; + while (packetSize--) + data[nbBytesRcv++] = AT91C_BASE_UDP->UDP_FDR[AT91C_EP_OUT]; + UDP_CLEAR_EP_FLAGS(AT91C_EP_OUT, bank); + if (bank == AT91C_UDP_RX_DATA_BK0) { + bank = AT91C_UDP_RX_DATA_BK1; + } else { + bank = AT91C_UDP_RX_DATA_BK0; + } + } + if (time_out++ == 0x1fff) break; + } + + btReceiveBank = bank; + return nbBytesRcv; +} + + +//*---------------------------------------------------------------------------- +//* \fn usb_write +//* \brief Send through endpoint 2 +//*---------------------------------------------------------------------------- +static uint32_t usb_write(const uint8_t* data, const size_t len) { + size_t length = len; + uint32_t cpt = 0; + + if (!length) return 0; + if (!usb_check()) return 0; + + // Send the first packet + cpt = MIN(length, AT91C_EP_IN_SIZE); + length -= cpt; + while (cpt--) { + AT91C_BASE_UDP->UDP_FDR[AT91C_EP_IN] = *data++; + } + UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY); + while (!(AT91C_BASE_UDP->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXPKTRDY)) + /* wait */; + + while (length) { + // Fill the next bank + cpt = MIN(length, AT91C_EP_IN_SIZE); + length -= cpt; + while (cpt--) { + AT91C_BASE_UDP->UDP_FDR[AT91C_EP_IN] = *data++; + } + // Wait for the previous bank to be sent + while (!(AT91C_BASE_UDP->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) { + if (!usb_check()) return length; + } + UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY); + while (!(AT91C_BASE_UDP->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXPKTRDY)) + /* wait */; + UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP); + while (AT91C_BASE_UDP->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP) + /* wait */; + } + + // Wait for the end of transfer + while (!(AT91C_BASE_UDP->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) { + if (!usb_check()) return length; + } + UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP); + while (AT91C_BASE_UDP->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP) + /* wait */; + + if (len % AT91C_EP_IN_SIZE == 0) { // need to send a zero length packet to complete the transfer + AT91F_USB_SendZlp(AT91C_EP_IN); + } + + return length; +} + + +//*************************************************************************** +// Interface to the main program +//*************************************************************************** + +// The function to receive a command from the client via USB +bool cmd_receive(UsbCommand* cmd) { + + // Check if there is a usb packet available + if (!usb_poll()) + return false; + + // Try to retrieve the available command frame + size_t rxlen = usb_read((uint8_t*)cmd, sizeof(UsbCommand)); + + // Check if the transfer was complete + if (rxlen != sizeof(UsbCommand)) + return false; + + // Received command successfully + return true; +} + + +// The function to send a response to the client via USB +bool cmd_send(uint16_t cmd, uint32_t arg0, uint32_t arg1, uint32_t arg2, void* data, uint16_t datalen) { + + UsbResponse txcmd; + + // Compose the outgoing response frame + txcmd.cmd = cmd | CMD_VARIABLE_SIZE_FLAG; + txcmd.arg[0] = arg0; + txcmd.arg[1] = arg1; + txcmd.arg[2] = arg2; + + // Add the (optional) content to the frame, with a maximum size of USB_CMD_DATA_SIZE + if (data) { + datalen = MIN(datalen, USB_CMD_DATA_SIZE); + for (uint16_t i = 0; i < datalen; i++) { + txcmd.d.asBytes[i] = ((uint8_t*)data)[i]; + } + txcmd.datalen = datalen; + } else { + txcmd.datalen = 0; + } + + // Send frame and make sure all bytes are transmitted + size_t tx_size = offsetof(UsbResponse, d) + datalen; + if (usb_write((uint8_t*)&txcmd, tx_size) != 0) return false; + + return true; +} + + +// For compatibility only: legacy function to send a response with fixed size to the client via USB +bool cmd_send_old(uint16_t cmd, uint32_t arg0, uint32_t arg1, uint32_t arg2, void* data, uint16_t datalen) { + + UsbCommand txcmd; + + // Compose the outgoing response frame + txcmd.cmd = cmd; + txcmd.arg[0] = arg0; + txcmd.arg[1] = arg1; + txcmd.arg[2] = arg2; + + // Add the (optional) content to the frame, with a maximum size of USB_CMD_DATA_SIZE + if (data) { + datalen = MIN(datalen, USB_CMD_DATA_SIZE); + for (uint16_t i = 0; i < datalen; i++) { + txcmd.d.asBytes[i] = ((uint8_t*)data)[i]; + } + } + + // Send frame and make sure all bytes are transmitted + if (usb_write((uint8_t*)&txcmd, sizeof(UsbCommand)) != 0) return false; + + return true; +} +