X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/85f581c79f0e10f537b2ae9a28a14d96fe255680..refs/pull/216/head:/CHANGELOG.md diff --git a/CHANGELOG.md b/CHANGELOG.md index dffe9a81..936fbbd0 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -5,6 +5,26 @@ This project uses the changelog in accordance with [keepchangelog](http://keepac ## [unreleased][unreleased] ### Added +- Added EM4x05/EM4x69 chip detection to lf search (marshmellow) +- Added lf em 4x05dump command to read and output all the blocks of the chip (marshmellow) +- Added lf em 4x05info command to read and display information about the chip (marshmellow) +- Added lf cotag read, and added it to lf search (iceman) +- Added hitag2 read UID only and added that to lf search (marshmellow) +- Added lf pyramid commands (iceman) +- Added lf presco commands - some bits not fully understood... (iceman) +- Added experimental HitagS support (Oguzhan Cicek, Hendrik Schwartke, Ralf Spenneberg) + see https://media.ccc.de/v/32c3-7166-sicherheit_von_125khz_transpondern_am_beispiel_hitag_s + English video available +- Added a LF ASK Sequence Terminator detection option to the standard ask demod - and applied it to `lf search u`, `lf t55xx detect`, and `data rawdemod am s` (marshmellow) +- `lf t55xx bruteforce [i <*.dic>]` - Simple bruteforce attack to find password - (iceman and others) +- `lf viking clone`- clone viking tag to t55x7 or Q5 from 4byte hex ID input +- `lf viking sim` - sim full viking tag from 4byte hex ID input +- `lf viking read` - read viking tag and output ID +- `lf t55xx wipe` - sets t55xx back to factory defaults +- Added viking demod to `lf search` (marshmellow) +- `data askvikingdemod` demod viking id tag from graphbuffer (marshmellow) +- `lf t55xx resetread` added reset then read command - should allow determining start of stream transmissions (marshmellow) +- `lf t55xx wakeup` added wake with password (AOR) to allow lf search or standard lf read after (iceman, marshmellow) - `hf iclass managekeys` to save, load and manage iclass keys. (adjusted most commands to accept a loaded key in memory) (marshmellow) - `hf iclass readblk` to select, authenticate, and read 1 block from an iclass card (marshmellow) - `hf iclass writeblk` to select, authenticate, and write 1 block to an iclass card (or picopass) (marshmellow + others) @@ -13,11 +33,47 @@ This project uses the changelog in accordance with [keepchangelog](http://keepac - `hf iclass encryptblk` - to encrypt a data block hex to prep for writing that block (marshmellow) - ISO14443a stand-alone operation with ARM CFLAG="WITH_ISO14443a_StandAlone". This code can read & emulate two banks of 14a tag UIDs and write to "magic" cards (Craig Young) - AWID26 command context added as 'lf awid' containing realtime demodulation as well as cloning/simulation based on tag numbers (Craig Young) +- Added 'hw status'. This command makes the ARM print out some runtime information. (holiman) +- Added 'hw ping'. This command just sends a usb packets and checks if the pm3 is responsive. Can be used to abort certain operations which supports abort over usb. (holiman) +- Added `data hex2bin` and `data bin2hex` for command line conversion between binary and hexadecimal (holiman) +- Added 'hf snoop'. This command take digitalized signal from FPGA and put in BigBuffer. (pwpiwi + enio) +- Added Topaz (NFC type 1) protocol support ('hf topaz reader', 'hf list topaz', 'hf 14a raw -T', 'hf topaz snoop'). (piwi) +- Added option c to 'hf list' (mark CRC bytes) (piwi) ### Changed +- small changes to lf psk and fsk demods to improve results when the trace begins with noise or the chip isn't broadcasting yet (marshmellow) +- NOTE CHANGED ALL `lf em4x em*` cmds to simpler `lf em ` - example: `lf em4x em410xdemod` is now `lf em 410xdemod` +- Renamed and rebuilt `lf em readword` && readwordpwd to `lf em 4x05readword` - it now demods and outputs the read block (marshmellow/iceman) +- Renamed and rebuilt `lf em writeword` && writewordpwd to `lf em 4x05writeword` - it now also reads validation output from the tag (marshmellow/iceman) +- Fixed bug in lf sim and continuous demods not turning off antenna when finished +- Fixed bug(s) in hf iclass write +- Fixed bug in lf biphase sim - `lf simask b` (and any tagtype that relies on it - gproxii...) (marshmellow) +- Fixed bug in lf viking clone/sim (iceman) +- Fixed broken `data askedgedetect` (marshmellow) +- Adjusted hf mf sim command (marshmellow) + added auto run mfkey32 to extract all keys + also added f parameter to allow attacking with UIDs from a file (implies x and i parameters) + also added e parameter to allow adding the extracted keys to emulator memory for the next simulation + added 10 byte uid option +- Added `[l] ` option to data printdemodbuffer (marshmellow) +- Adjusted lf awid clone to optionally clone to Q5 tags (marshmellow) +- Adjusted lf t55xx detect to find Q5 tags (t5555) instead of just t55x7 (marshmellow) +- Adjusted all lf NRZ demods - works more accurately and consistently (as long as you have strong signal) (marshmellow) +- Adjusted lf pskindalademod to reduce false positive reads. (marshmellow) +- Small adjustments to psk, nrz, and ask clock detect routines - more reliable. (marshmellow) +- Adjusted lf em410x em410xsim to accept a clock argument (marshmellow) +- Adjusted lf t55xx dump to allow overriding the safety check and warning text (marshmellow) +- Adjusted lf t55xx write input variables (marshmellow) +- Adjusted lf t55xx read with password safety check and warning text and adjusted the input variables (marshmellow & iceman) +- Adjusted LF FSK demod to account for cross threshold fluctuations (898 count waves will adjust the 9 to 8 now...) more accurate. (marshmellow) +- Adjusted timings for t55xx commands. more reliable now. (marshmellow & iceman) +- `lf cmdread` adjusted input methods and added help text (marshmellow & iceman) - changed `lf config t ` to be 0 - 128 and will trigger on + or - threshold value (marshmellow) -- `hf iclass dump` cli options - can now dump AA1 and AA2 with different keys in one run (does not go to muliple pages for the larger tags yet) +- `hf iclass dump` cli options - can now dump AA1 and AA2 with different keys in one run (does not go to multiple pages for the larger tags yet) (marshmellow) +- Revised workflow for StandAloneMode14a (Craig Young) - EPA functions (`hf epa`) now support both ISO 14443-A and 14443-B cards (frederikmoellers) +- 'hw version' only talks to ARM at startup, after that the info is cached. (pwpiwi) +- Added `r` option to iclass functions - allows key to be provided in raw block 3/4 format ## [2.2.0][2015-07-12]