X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/9276e859a6f57ba2518e501fd8148a390ca3aa5e..7144c99b0765f6995e7a954030bfcb5bb2d441d0:/armsrc/appmain.c diff --git a/armsrc/appmain.c b/armsrc/appmain.c index 4ccb8edc..ed9b559a 100644 --- a/armsrc/appmain.c +++ b/armsrc/appmain.c @@ -34,6 +34,7 @@ // Craig Young - 14a stand-alone code #ifdef WITH_ISO14443a_StandAlone #include "iso14443a.h" + #include "protocols.h" #endif #define abs(x) ( ((x)<0) ? -(x) : (x) ) @@ -350,7 +351,6 @@ void SendStatus(void) #if defined(WITH_ISO14443a_StandAlone) || defined(WITH_LF) #define OPTS 2 - void StandAloneMode() { DbpString("Stand-alone mode! No PC necessary."); @@ -364,13 +364,9 @@ void StandAloneMode() LED(LED_GREEN, 200); LED(LED_ORANGE, 200); LED(LED_RED, 200); - } - #endif - - #ifdef WITH_ISO14443a_StandAlone void StandAloneMode14a() { @@ -387,6 +383,8 @@ void StandAloneMode14a() uint32_t uid_tmp2 = 0; iso14a_card_select_t hi14a_card[OPTS]; + uint8_t params = (MAGIC_SINGLE | MAGIC_DATAIN); + LED(selected + 1, 0); for (;;) @@ -429,7 +427,7 @@ void StandAloneMode14a() SpinDelay(300); } } - if (!iso14443a_select_card(uid, &hi14a_card[selected], &cuid)) + if (!iso14443a_select_card(uid, &hi14a_card[selected], &cuid, true, 0)) continue; else { @@ -480,87 +478,84 @@ void StandAloneMode14a() else if (iGotoClone==1) { iGotoClone=0; - LEDsoff(); - LED(selected + 1, 0); - LED(LED_ORANGE, 250); + LEDsoff(); + LED(selected + 1, 0); + LED(LED_ORANGE, 250); + // record + Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]); - // record - Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]); + // wait for button to be released + // Delay cloning until card is in place + while(BUTTON_PRESS()) + WDT_HIT(); - // wait for button to be released - while(BUTTON_PRESS()) - { - // Delay cloning until card is in place - WDT_HIT(); - } - Dbprintf("Starting clone. [Bank: %u]", selected); - // need this delay to prevent catching some weird data - SpinDelay(500); - // Begin clone function here: - /* Example from client/mifarehost.c for commanding a block write for "magic Chinese" cards: - UsbCommand c = {CMD_MIFARE_CSETBLOCK, {wantWipe, params & (0xFE | (uid == NULL ? 0:1)), blockNo}}; - memcpy(c.d.asBytes, data, 16); - SendCommand(&c); - - Block read is similar: - UsbCommand c = {CMD_MIFARE_CGETBLOCK, {params, 0, blockNo}}; - We need to imitate that call with blockNo 0 to set a uid. - - The get and set commands are handled in this file: - // Work with "magic Chinese" card - case CMD_MIFARE_CSETBLOCK: - MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); - break; - case CMD_MIFARE_CGETBLOCK: - MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); - break; - - mfCSetUID provides example logic for UID set workflow: - -Read block0 from card in field with MifareCGetBlock() - -Configure new values without replacing reserved bytes - memcpy(block0, uid, 4); // Copy UID bytes from byte array - // Mifare UID BCC - block0[4] = block0[0]^block0[1]^block0[2]^block0[3]; // BCC on byte 5 - Bytes 5-7 are reserved SAK and ATQA for mifare classic - -Use mfCSetBlock(0, block0, oldUID, wantWipe, CSETBLOCK_SINGLE_OPER) to write it - */ - uint8_t oldBlock0[16] = {0}, newBlock0[16] = {0}, testBlock0[16] = {0}; - // arg0 = Flags == CSETBLOCK_SINGLE_OPER=0x1F, arg1=returnSlot, arg2=blockNo - MifareCGetBlock(0x3F, 1, 0, oldBlock0); + Dbprintf("Starting clone. [Bank: %u]", selected); + // need this delay to prevent catching some weird data + SpinDelay(500); + // Begin clone function here: + /* Example from client/mifarehost.c for commanding a block write for "magic Chinese" cards: + UsbCommand c = {CMD_MIFARE_CSETBLOCK, {params & (0xFE | (uid == NULL ? 0:1)), blockNo, 0}}; + memcpy(c.d.asBytes, data, 16); + SendCommand(&c); + + Block read is similar: + UsbCommand c = {CMD_MIFARE_CGETBLOCK, {params, blockNo, 0}}; + We need to imitate that call with blockNo 0 to set a uid. + + The get and set commands are handled in this file: + // Work with "magic Chinese" card + case CMD_MIFARE_CSETBLOCK: + MifareCSetBlock(c->arg[0], c->arg[1], c->d.asBytes); + break; + case CMD_MIFARE_CGETBLOCK: + MifareCGetBlock(c->arg[0], c->arg[1], c->d.asBytes); + break; + + mfCSetUID provides example logic for UID set workflow: + -Read block0 from card in field with MifareCGetBlock() + -Configure new values without replacing reserved bytes + memcpy(block0, uid, 4); // Copy UID bytes from byte array + // Mifare UID BCC + block0[4] = block0[0]^block0[1]^block0[2]^block0[3]; // BCC on byte 5 + Bytes 5-7 are reserved SAK and ATQA for mifare classic + -Use mfCSetBlock(0, block0, oldUID, wantWipe, MAGIC_SINGLE) to write it + */ + uint8_t oldBlock0[16] = {0}, newBlock0[16] = {0}, testBlock0[16] = {0}; + // arg0 = Flags, arg1=blockNo + MifareCGetBlock(params, 0, oldBlock0); if (oldBlock0[0] == 0 && oldBlock0[0] == oldBlock0[1] && oldBlock0[1] == oldBlock0[2] && oldBlock0[2] == oldBlock0[3]) { Dbprintf("No changeable tag detected. Returning to replay mode for bank[%d]", selected); playing = 1; } else { - Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]); - memcpy(newBlock0,oldBlock0,16); - // Copy uid_1st for bank (2nd is for longer UIDs not supported if classic) - - newBlock0[0] = uid_1st[selected]>>24; - newBlock0[1] = 0xFF & (uid_1st[selected]>>16); - newBlock0[2] = 0xFF & (uid_1st[selected]>>8); - newBlock0[3] = 0xFF & (uid_1st[selected]); - newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3]; - // arg0 = needWipe, arg1 = workFlags, arg2 = blockNo, datain - MifareCSetBlock(0, 0xFF,0, newBlock0); - MifareCGetBlock(0x3F, 1, 0, testBlock0); - if (memcmp(testBlock0,newBlock0,16)==0) - { - DbpString("Cloned successfull!"); - cardRead[selected] = 0; // Only if the card was cloned successfully should we clear it + Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]); + memcpy(newBlock0,oldBlock0,16); + // Copy uid_1st for bank (2nd is for longer UIDs not supported if classic) + + newBlock0[0] = uid_1st[selected]>>24; + newBlock0[1] = 0xFF & (uid_1st[selected]>>16); + newBlock0[2] = 0xFF & (uid_1st[selected]>>8); + newBlock0[3] = 0xFF & (uid_1st[selected]); + newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3]; + + // arg0 = workFlags, arg1 = blockNo, datain + MifareCSetBlock(params, 0, newBlock0); + MifareCGetBlock(params, 0, testBlock0); + + if (memcmp(testBlock0, newBlock0, 16)==0) { + DbpString("Cloned successfull!"); + cardRead[selected] = 0; // Only if the card was cloned successfully should we clear it playing = 0; iGotoRecord = 1; - selected = (selected + 1) % OPTS; - } - else { + selected = (selected + 1) % OPTS; + } else { Dbprintf("Clone failed. Back to replay mode on bank[%d]", selected); playing = 1; } } LEDsoff(); LED(selected + 1, 0); - } // Change where to record (or begin playing) else if (playing==1) // button_pressed == BUTTON_SINGLE_CLICK && cardRead[selected]) @@ -640,8 +635,7 @@ void SamyRun() // Turn on selected LED LED(selected + 1, 0); - for (;;) - { + for (;;) { usb_poll(); WDT_HIT(); @@ -672,49 +666,41 @@ void SamyRun() LEDsoff(); LED(selected + 1, 0); // Finished recording - // If we were previously playing, set playing off // so next button push begins playing what we recorded - playing = 0; - - cardRead = 1; - + playing = 0; + cardRead = 1; } + else if (button_pressed > 0 && cardRead == 1) { + LEDsoff(); + LED(selected + 1, 0); + LED(LED_ORANGE, 0); - else if (button_pressed > 0 && cardRead == 1) - { - LEDsoff(); - LED(selected + 1, 0); - LED(LED_ORANGE, 0); - - // record - Dbprintf("Cloning %x %x %x", selected, high[selected], low[selected]); + // record + Dbprintf("Cloning %x %x %x", selected, high[selected], low[selected]); - // wait for button to be released - while(BUTTON_PRESS()) - WDT_HIT(); + // wait for button to be released + while(BUTTON_PRESS()) + WDT_HIT(); - /* need this delay to prevent catching some weird data */ - SpinDelay(500); + /* need this delay to prevent catching some weird data */ + SpinDelay(500); - CopyHIDtoT55x7(high[selected], low[selected], 0, 0); - Dbprintf("Cloned %x %x %x", selected, high[selected], low[selected]); + CopyHIDtoT55x7(high[selected], low[selected], 0, 0); + Dbprintf("Cloned %x %x %x", selected, high[selected], low[selected]); - LEDsoff(); - LED(selected + 1, 0); - // Finished recording + LEDsoff(); + LED(selected + 1, 0); + // Finished recording - // If we were previously playing, set playing off - // so next button push begins playing what we recorded - playing = 0; - - cardRead = 0; - + // If we were previously playing, set playing off + // so next button push begins playing what we recorded + playing = 0; + cardRead = 0; } // Change where to record (or begin playing) - else if (button_pressed) - { + else if (button_pressed) { // Next option if we were previously playing if (playing) selected = (selected + 1) % OPTS; @@ -921,7 +907,7 @@ void UsbPacketReceived(uint8_t *packet, int len) setSamplingConfig((sample_config *) c->d.asBytes); break; case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K: - cmd_send(CMD_ACK,SampleLF(c->arg[0]),0,0,0,0); + cmd_send(CMD_ACK, SampleLF(c->arg[0]),0,0,0,0); break; case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K: ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes); @@ -951,7 +937,7 @@ void UsbPacketReceived(uint8_t *packet, int len) CmdIOdemodFSK(c->arg[0], 0, 0, 1); break; case CMD_IO_CLONE_TAG: - CopyIOtoT55x7(c->arg[0], c->arg[1], c->d.asBytes[0]); + CopyIOtoT55x7(c->arg[0], c->arg[1]); break; case CMD_EM410X_DEMOD: CmdEM410xdemod(c->arg[0], 0, 0, 1); @@ -985,12 +971,12 @@ void UsbPacketReceived(uint8_t *packet, int len) case CMD_T55XX_WRITE_BLOCK: T55xxWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]); break; - case CMD_T55XX_READ_TRACE: - T55xxReadTrace(); - break; case CMD_T55XX_WAKEUP: T55xxWakeUp(c->arg[0]); break; + case CMD_T55XX_RESET_READ: + T55xxResetRead(); + break; case CMD_PCF7931_READ: ReadPCF7931(); break; @@ -1005,12 +991,10 @@ void UsbPacketReceived(uint8_t *packet, int len) break; case CMD_AWID_DEMOD_FSK: // Set realtime AWID demodulation CmdAWIDdemodFSK(c->arg[0], 0, 0, 1); - break; + break; case CMD_VIKING_CLONE_TAG: - CopyViKingtoT55x7(c->arg[0],c->arg[1]); + CopyVikingtoT55xx(c->arg[0], c->arg[1], c->arg[2]); break; - - #endif #ifdef WITH_HITAG @@ -1133,6 +1117,9 @@ void UsbPacketReceived(uint8_t *packet, int len) case CMD_MIFAREU_WRITEBL: MifareUWriteBlock(c->arg[0], c->arg[1], c->d.asBytes); break; + case CMD_MIFARE_ACQUIRE_ENCRYPTED_NONCES: + MifareAcquireEncryptedNonces(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); + break; case CMD_MIFARE_NESTED: MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); break; @@ -1162,10 +1149,10 @@ void UsbPacketReceived(uint8_t *packet, int len) // Work with "magic Chinese" card case CMD_MIFARE_CSETBLOCK: - MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); + MifareCSetBlock(c->arg[0], c->arg[1], c->d.asBytes); break; case CMD_MIFARE_CGETBLOCK: - MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes); + MifareCGetBlock(c->arg[0], c->arg[1], c->d.asBytes); break; case CMD_MIFARE_CIDENT: MifareCIdent(); @@ -1196,7 +1183,6 @@ void UsbPacketReceived(uint8_t *packet, int len) break; case CMD_MIFARE_COLLECT_NONCES: - MifareCollectNonces(c->arg[0], c->arg[1]); break; #endif @@ -1236,6 +1222,11 @@ void UsbPacketReceived(uint8_t *packet, int len) iClass_Clone(c->arg[0], c->arg[1], c->d.asBytes); break; #endif +#ifdef WITH_HFSNOOP + case CMD_HF_SNIFFER: + HfSnoop(c->arg[0], c->arg[1]); + break; +#endif case CMD_BUFF_CLEAR: BigBuf_Clear(); @@ -1372,7 +1363,7 @@ void __attribute__((noreturn)) AppMain(void) AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_PCK0; // PCK0 is PLL clock / 4 = 96Mhz / 4 = 24Mhz AT91C_BASE_PMC->PMC_PCKR[0] = AT91C_PMC_CSS_PLL_CLK | - AT91C_PMC_PRES_CLK_4; + AT91C_PMC_PRES_CLK_4; // 4 for 24Mhz pck0, 2 for 48 MHZ pck0 AT91C_BASE_PIOA->PIO_OER = GPIO_PCK0; // Reset SPI