X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/a71c68bdf0d117609a1ffd0141d1d682e1ff8e15..614da335f6e2c35ea8620cecacdde8270111e5b1:/armsrc/appmain.c?ds=sidebyside

diff --git a/armsrc/appmain.c b/armsrc/appmain.c
index 2e1a43af..ed9b559a 100644
--- a/armsrc/appmain.c
+++ b/armsrc/appmain.c
@@ -26,6 +26,7 @@
 #include "lfsampling.h"
 #include "BigBuf.h"
 #include "mifareutil.h"
+#include "pcf7931.h"
 #ifdef WITH_LCD
  #include "LCD.h"
 #endif
@@ -33,6 +34,7 @@
 // Craig Young - 14a stand-alone code
 #ifdef WITH_ISO14443a_StandAlone
  #include "iso14443a.h"
+ #include "protocols.h"
 #endif
 
 #define abs(x) ( ((x)<0) ? -(x) : (x) )
@@ -301,39 +303,42 @@ void SendVersion(void)
 
 // measure the USB Speed by sending SpeedTestBufferSize bytes to client and measuring the elapsed time.
 // Note: this mimics GetFromBigbuf(), i.e. we have the overhead of the UsbCommand structure included.
-void printUSBSpeed(uint32_t SpeedTestBufferSize) 
+void printUSBSpeed(void) 
 {
 	Dbprintf("USB Speed:");
-	Dbprintf("  Sending %d bytes payload...", SpeedTestBufferSize);
+	Dbprintf("  Sending USB packets to client...");
 
+	#define USB_SPEED_TEST_MIN_TIME	1500	// in milliseconds
 	uint8_t *test_data = BigBuf_get_addr();
+	uint32_t end_time;
 
-	uint32_t start_time = GetTickCount();
+	uint32_t start_time = end_time = GetTickCount();
+	uint32_t bytes_transferred = 0;
 
 	LED_B_ON();
-	for(size_t i=0; i < SpeedTestBufferSize; i += USB_CMD_DATA_SIZE) {
-		size_t len = MIN((SpeedTestBufferSize - i), USB_CMD_DATA_SIZE);
-		cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K,0,len,0,test_data,len);
+	while(end_time < start_time + USB_SPEED_TEST_MIN_TIME) {
+		cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K, 0, USB_CMD_DATA_SIZE, 0, test_data, USB_CMD_DATA_SIZE);
+		end_time = GetTickCount();
+		bytes_transferred += USB_CMD_DATA_SIZE;
 	}
 	LED_B_OFF();
 
-	uint32_t end_time = GetTickCount();
-
-	Dbprintf("  Time elapsed: %dms, USB Transfer Speed PM3 -> Client = %d Bytes/s", 
-		end_time - start_time,
-		1000* SpeedTestBufferSize / (end_time - start_time));
+	Dbprintf("  Time elapsed:      %dms", end_time - start_time);
+	Dbprintf("  Bytes transferred: %d", bytes_transferred);
+	Dbprintf("  USB Transfer Speed PM3 -> Client = %d Bytes/s", 
+		1000 * bytes_transferred / (end_time - start_time));
 
 }
 	
 /**
   * Prints runtime information about the PM3.
 **/
-void SendStatus(uint32_t SpeedTestBufferSize)
+void SendStatus(void)
 {
 	BigBuf_print_status();
 	Fpga_print_status();
 	printConfig(); //LF Sampling config
-	printUSBSpeed(SpeedTestBufferSize);
+	printUSBSpeed();
 	Dbprintf("Various");
 	Dbprintf("  MF_DBGLEVEL........%d", MF_DBGLEVEL);
 	Dbprintf("  ToSendMax..........%d", ToSendMax);
@@ -346,7 +351,6 @@ void SendStatus(uint32_t SpeedTestBufferSize)
 #if defined(WITH_ISO14443a_StandAlone) || defined(WITH_LF)
 
 #define OPTS 2
-
 void StandAloneMode()
 {
 	DbpString("Stand-alone mode! No PC necessary.");
@@ -360,13 +364,9 @@ void StandAloneMode()
 	LED(LED_GREEN,	200);
 	LED(LED_ORANGE, 200);
 	LED(LED_RED,	200);
-
 }
-
 #endif
 
-
-
 #ifdef WITH_ISO14443a_StandAlone
 void StandAloneMode14a()
 {
@@ -383,6 +383,8 @@ void StandAloneMode14a()
 	uint32_t uid_tmp2 = 0;
 	iso14a_card_select_t hi14a_card[OPTS];
 
+	uint8_t params = (MAGIC_SINGLE | MAGIC_DATAIN);
+					
 	LED(selected + 1, 0);
 
 	for (;;)
@@ -425,7 +427,7 @@ void StandAloneMode14a()
 						SpinDelay(300);
 					}
 				}
-				if (!iso14443a_select_card(uid, &hi14a_card[selected], &cuid))
+				if (!iso14443a_select_card(uid, &hi14a_card[selected], &cuid, true, 0))
 					continue;
 				else
 				{
@@ -476,87 +478,84 @@ void StandAloneMode14a()
 		else if (iGotoClone==1)
 		{
 			iGotoClone=0;
-					LEDsoff();
-					LED(selected + 1, 0);
-					LED(LED_ORANGE, 250);
+			LEDsoff();
+			LED(selected + 1, 0);
+			LED(LED_ORANGE, 250);
 
+			// record
+			Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]);
 
-					// record
-					Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]);
+			// wait for button to be released
+			// Delay cloning until card is in place
+			while(BUTTON_PRESS())
+				WDT_HIT();
 
-					// wait for button to be released
-					while(BUTTON_PRESS())
-					{
-						// Delay cloning until card is in place
-						WDT_HIT();
-					}
-					Dbprintf("Starting clone. [Bank: %u]", selected);
-					// need this delay to prevent catching some weird data
-					SpinDelay(500);
-					// Begin clone function here:
-					/* Example from client/mifarehost.c for commanding a block write for "magic Chinese" cards:
-							UsbCommand c = {CMD_MIFARE_CSETBLOCK, {wantWipe, params & (0xFE | (uid == NULL ? 0:1)), blockNo}};
-							memcpy(c.d.asBytes, data, 16);
-							SendCommand(&c);
-
-						Block read is similar:
-							UsbCommand c = {CMD_MIFARE_CGETBLOCK, {params, 0, blockNo}};
-						We need to imitate that call with blockNo 0 to set a uid.
-
-						The get and set commands are handled in this file:
-							// Work with "magic Chinese" card
-							case CMD_MIFARE_CSETBLOCK:
-									MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
-									break;
-							case CMD_MIFARE_CGETBLOCK:
-									MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
-									break;
-
-						mfCSetUID provides example logic for UID set workflow:
-							-Read block0 from card in field with MifareCGetBlock()
-							-Configure new values without replacing reserved bytes
-									memcpy(block0, uid, 4); // Copy UID bytes from byte array
-									// Mifare UID BCC
-									block0[4] = block0[0]^block0[1]^block0[2]^block0[3]; // BCC on byte 5
-									Bytes 5-7 are reserved SAK and ATQA for mifare classic
-							-Use mfCSetBlock(0, block0, oldUID, wantWipe, CSETBLOCK_SINGLE_OPER) to write it
-					*/
-					uint8_t oldBlock0[16] = {0}, newBlock0[16] = {0}, testBlock0[16] = {0};
-					// arg0 = Flags == CSETBLOCK_SINGLE_OPER=0x1F, arg1=returnSlot, arg2=blockNo
-			MifareCGetBlock(0x3F, 1, 0, oldBlock0);
+			Dbprintf("Starting clone. [Bank: %u]", selected);
+			// need this delay to prevent catching some weird data
+			SpinDelay(500);
+			// Begin clone function here:
+			/* Example from client/mifarehost.c for commanding a block write for "magic Chinese" cards:
+					UsbCommand c = {CMD_MIFARE_CSETBLOCK, {params & (0xFE | (uid == NULL ? 0:1)), blockNo, 0}};
+					memcpy(c.d.asBytes, data, 16);
+					SendCommand(&c);
+
+				Block read is similar:
+					UsbCommand c = {CMD_MIFARE_CGETBLOCK, {params, blockNo, 0}};
+				We need to imitate that call with blockNo 0 to set a uid.
+
+				The get and set commands are handled in this file:
+					// Work with "magic Chinese" card
+					case CMD_MIFARE_CSETBLOCK:
+							MifareCSetBlock(c->arg[0], c->arg[1], c->d.asBytes);
+							break;
+					case CMD_MIFARE_CGETBLOCK:
+							MifareCGetBlock(c->arg[0], c->arg[1], c->d.asBytes);
+							break;
+
+				mfCSetUID provides example logic for UID set workflow:
+					-Read block0 from card in field with MifareCGetBlock()
+					-Configure new values without replacing reserved bytes
+							memcpy(block0, uid, 4); // Copy UID bytes from byte array
+							// Mifare UID BCC
+							block0[4] = block0[0]^block0[1]^block0[2]^block0[3]; // BCC on byte 5
+							Bytes 5-7 are reserved SAK and ATQA for mifare classic
+					-Use mfCSetBlock(0, block0, oldUID, wantWipe, MAGIC_SINGLE) to write it
+			*/
+			uint8_t oldBlock0[16] = {0}, newBlock0[16] = {0}, testBlock0[16] = {0};
+			// arg0 = Flags, arg1=blockNo
+			MifareCGetBlock(params, 0, oldBlock0);
 			if (oldBlock0[0] == 0 && oldBlock0[0] == oldBlock0[1]  && oldBlock0[1] == oldBlock0[2] && oldBlock0[2] == oldBlock0[3]) {
 				Dbprintf("No changeable tag detected. Returning to replay mode for bank[%d]", selected);
 				playing = 1;
 			}
 			else {
-					Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]);
-					memcpy(newBlock0,oldBlock0,16);
-					// Copy uid_1st for bank (2nd is for longer UIDs not supported if classic)
-
-					newBlock0[0] = uid_1st[selected]>>24;
-					newBlock0[1] = 0xFF & (uid_1st[selected]>>16);
-					newBlock0[2] = 0xFF & (uid_1st[selected]>>8);
-					newBlock0[3] = 0xFF & (uid_1st[selected]);
-					newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3];
-					// arg0 = needWipe, arg1 = workFlags, arg2 = blockNo, datain
-					MifareCSetBlock(0, 0xFF,0, newBlock0);
-				MifareCGetBlock(0x3F, 1, 0, testBlock0);
-					if (memcmp(testBlock0,newBlock0,16)==0)
-					{
-						DbpString("Cloned successfull!");
-						cardRead[selected] = 0; // Only if the card was cloned successfully should we clear it
+				Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]);
+				memcpy(newBlock0,oldBlock0,16);
+				// Copy uid_1st for bank (2nd is for longer UIDs not supported if classic)
+
+				newBlock0[0] = uid_1st[selected]>>24;
+				newBlock0[1] = 0xFF & (uid_1st[selected]>>16);
+				newBlock0[2] = 0xFF & (uid_1st[selected]>>8);
+				newBlock0[3] = 0xFF & (uid_1st[selected]);
+				newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3];
+
+				// arg0 = workFlags, arg1 = blockNo, datain
+				MifareCSetBlock(params, 0, newBlock0);
+				MifareCGetBlock(params, 0, testBlock0);
+				
+				if (memcmp(testBlock0, newBlock0, 16)==0) {
+					DbpString("Cloned successfull!");
+					cardRead[selected] = 0; // Only if the card was cloned successfully should we clear it
 					playing = 0;
 					iGotoRecord = 1;
-				selected = (selected + 1) % OPTS;
-				}
-				else {
+					selected = (selected + 1) % OPTS;
+				} else {
 					Dbprintf("Clone failed. Back to replay mode on bank[%d]", selected);
 					playing = 1;
 				}
 			}
 			LEDsoff();
 			LED(selected + 1, 0);
-
 		}
 		// Change where to record (or begin playing)
 		else if (playing==1) // button_pressed == BUTTON_SINGLE_CLICK && cardRead[selected])
@@ -636,8 +635,7 @@ void SamyRun()
 	// Turn on selected LED
 	LED(selected + 1, 0);
 
-	for (;;)
-	{
+	for (;;) {
 		usb_poll();
 		WDT_HIT();
 
@@ -668,49 +666,41 @@ void SamyRun()
 			LEDsoff();
 			LED(selected + 1, 0);
 			// Finished recording
-
 			// If we were previously playing, set playing off
 			// so next button push begins playing what we recorded
-			playing = 0;
-			
-			cardRead = 1;
-	
+			playing = 0;			
+			cardRead = 1;	
 		}
+		else if (button_pressed > 0 && cardRead == 1) {
+			LEDsoff();
+			LED(selected + 1, 0);
+			LED(LED_ORANGE, 0);
 
-		else if (button_pressed > 0 && cardRead == 1)
-		{
-					LEDsoff();
-					LED(selected + 1, 0);
-					LED(LED_ORANGE, 0);
-
-					// record
-					Dbprintf("Cloning %x %x %x", selected, high[selected], low[selected]);
+			// record
+			Dbprintf("Cloning %x %x %x", selected, high[selected], low[selected]);
 
-					// wait for button to be released
-					while(BUTTON_PRESS())
-						WDT_HIT();
+			// wait for button to be released
+			while(BUTTON_PRESS())
+				WDT_HIT();
 
-					/* need this delay to prevent catching some weird data */
-					SpinDelay(500);
+			/* need this delay to prevent catching some weird data */
+			SpinDelay(500);
 
-					CopyHIDtoT55x7(high[selected], low[selected], 0, 0);
-					Dbprintf("Cloned %x %x %x", selected, high[selected], low[selected]);
+			CopyHIDtoT55x7(high[selected], low[selected], 0, 0);
+			Dbprintf("Cloned %x %x %x", selected, high[selected], low[selected]);
 
-					LEDsoff();
-					LED(selected + 1, 0);
-					// Finished recording
+			LEDsoff();
+			LED(selected + 1, 0);
+			// Finished recording
 
-					// If we were previously playing, set playing off
-					// so next button push begins playing what we recorded
-					playing = 0;
-					
-					cardRead = 0;
-			
+			// If we were previously playing, set playing off
+			// so next button push begins playing what we recorded
+			playing = 0;			
+			cardRead = 0;			
 		}
 
 		// Change where to record (or begin playing)
-		else if (button_pressed)
-		{
+		else if (button_pressed) {
 			// Next option if we were previously playing
 			if (playing)
 				selected = (selected + 1) % OPTS;
@@ -917,7 +907,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			setSamplingConfig((sample_config *) c->d.asBytes);
 			break;
 		case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:
-			cmd_send(CMD_ACK,SampleLF(c->arg[0]),0,0,0,0);
+			cmd_send(CMD_ACK, SampleLF(c->arg[0]),0,0,0,0);
 			break;
 		case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:
 			ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
@@ -947,7 +937,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			CmdIOdemodFSK(c->arg[0], 0, 0, 1);
 			break;
 		case CMD_IO_CLONE_TAG:
-			CopyIOtoT55x7(c->arg[0], c->arg[1], c->d.asBytes[0]);
+			CopyIOtoT55x7(c->arg[0], c->arg[1]);
 			break;
 		case CMD_EM410X_DEMOD:
 			CmdEM410xdemod(c->arg[0], 0, 0, 1);
@@ -976,18 +966,22 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			CopyIndala224toT55x7(c->d.asDwords[0], c->d.asDwords[1], c->d.asDwords[2], c->d.asDwords[3], c->d.asDwords[4], c->d.asDwords[5], c->d.asDwords[6]);
 			break;
 		case CMD_T55XX_READ_BLOCK:
-			T55xxReadBlock(c->arg[1], c->arg[2],c->d.asBytes[0]);
+			T55xxReadBlock(c->arg[0], c->arg[1], c->arg[2]);
 			break;
 		case CMD_T55XX_WRITE_BLOCK:
 			T55xxWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
-			cmd_send(CMD_ACK,0,0,0,0,0);
 			break;
-		case CMD_T55XX_READ_TRACE:
-			T55xxReadTrace();
+		case CMD_T55XX_WAKEUP:
+			T55xxWakeUp(c->arg[0]);
+			break;
+		case CMD_T55XX_RESET_READ:
+			T55xxResetRead();
 			break;
 		case CMD_PCF7931_READ:
 			ReadPCF7931();
-			cmd_send(CMD_ACK,0,0,0,0,0);
+			break;
+		case CMD_PCF7931_WRITE:
+			WritePCF7931(c->d.asBytes[0],c->d.asBytes[1],c->d.asBytes[2],c->d.asBytes[3],c->d.asBytes[4],c->d.asBytes[5],c->d.asBytes[6], c->d.asBytes[9], c->d.asBytes[7]-128,c->d.asBytes[8]-128, c->arg[0], c->arg[1], c->arg[2]);
 			break;
 		case CMD_EM4X_READ_WORD:
 			EM4xReadWord(c->arg[1], c->arg[2],c->d.asBytes[0]);
@@ -997,7 +991,10 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			break;
 		case CMD_AWID_DEMOD_FSK: // Set realtime AWID demodulation
 			CmdAWIDdemodFSK(c->arg[0], 0, 0, 1);
-                        break;
+			break;
+        case CMD_VIKING_CLONE_TAG:
+			CopyVikingtoT55xx(c->arg[0], c->arg[1], c->arg[2]);
+            break;
 #endif
 
 #ifdef WITH_HITAG
@@ -1120,6 +1117,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
 		case CMD_MIFAREU_WRITEBL:
 			MifareUWriteBlock(c->arg[0], c->arg[1], c->d.asBytes);
 			break;
+		case CMD_MIFARE_ACQUIRE_ENCRYPTED_NONCES:
+			MifareAcquireEncryptedNonces(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+			break;
 		case CMD_MIFARE_NESTED:
 			MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
 			break;
@@ -1149,10 +1149,10 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			
 		// Work with "magic Chinese" card
 		case CMD_MIFARE_CSETBLOCK:
-			MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+			MifareCSetBlock(c->arg[0], c->arg[1], c->d.asBytes);
 			break;
 		case CMD_MIFARE_CGETBLOCK:
-			MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+			MifareCGetBlock(c->arg[0], c->arg[1], c->d.asBytes);
 			break;
 		case CMD_MIFARE_CIDENT:
 			MifareCIdent();
@@ -1183,7 +1183,6 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			break;
 
 		case CMD_MIFARE_COLLECT_NONCES:
-			MifareCollectNonces(c->arg[0], c->arg[1]);
 			break;
 #endif
 
@@ -1204,6 +1203,29 @@ void UsbPacketReceived(uint8_t *packet, int len)
 	case CMD_ICLASS_EML_MEMSET:
 			emlSet(c->d.asBytes,c->arg[0], c->arg[1]);
 			break;
+		case CMD_ICLASS_WRITEBLOCK:
+			iClass_WriteBlock(c->arg[0], c->d.asBytes);
+			break;
+		case CMD_ICLASS_READCHECK:  // auth step 1
+			iClass_ReadCheck(c->arg[0], c->arg[1]);
+			break;
+		case CMD_ICLASS_READBLOCK:
+			iClass_ReadBlk(c->arg[0]);
+			break;
+		case CMD_ICLASS_AUTHENTICATION: //check
+			iClass_Authentication(c->d.asBytes);
+			break;
+		case CMD_ICLASS_DUMP:
+			iClass_Dump(c->arg[0], c->arg[1]);
+			break;
+		case CMD_ICLASS_CLONE:
+			iClass_Clone(c->arg[0], c->arg[1], c->d.asBytes);
+			break;
+#endif
+#ifdef WITH_HFSNOOP
+		case CMD_HF_SNIFFER:
+			HfSnoop(c->arg[0], c->arg[1]);
+			break;
 #endif
 
 		case CMD_BUFF_CLEAR:
@@ -1232,8 +1254,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
 
 			LED_B_ON();
 			uint8_t *BigBuf = BigBuf_get_addr();
+			size_t len = 0;
 			for(size_t i=0; i<c->arg[1]; i += USB_CMD_DATA_SIZE) {
-				size_t len = MIN((c->arg[1] - i),USB_CMD_DATA_SIZE);
+				len = MIN((c->arg[1] - i),USB_CMD_DATA_SIZE);
 				cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K,i,len,BigBuf_get_traceLen(),BigBuf+c->arg[0]+i,len);
 			}
 			// Trigger a finish downloading signal with an ACK frame
@@ -1269,7 +1292,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			SendVersion();
 			break;
 		case CMD_STATUS:
-			SendStatus(c->arg[0]);
+			SendStatus();
 			break;
 		case CMD_PING:
 			cmd_send(CMD_ACK,0,0,0,0,0);
@@ -1340,7 +1363,7 @@ void  __attribute__((noreturn)) AppMain(void)
 	AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_PCK0;
 	// PCK0 is PLL clock / 4 = 96Mhz / 4 = 24Mhz
 	AT91C_BASE_PMC->PMC_PCKR[0] = AT91C_PMC_CSS_PLL_CLK |
-		AT91C_PMC_PRES_CLK_4;
+		AT91C_PMC_PRES_CLK_4; //  4 for 24Mhz pck0, 2 for 48 MHZ pck0
 	AT91C_BASE_PIOA->PIO_OER = GPIO_PCK0;
 
 	// Reset SPI