X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/a71c68bdf0d117609a1ffd0141d1d682e1ff8e15..683180cb6015109a5b4572fcb5d781955a4ff9ba:/client/cmdhw.c?ds=sidebyside

diff --git a/client/cmdhw.c b/client/cmdhw.c
index 16be8bbe..11112118 100644
--- a/client/cmdhw.c
+++ b/client/cmdhw.c
@@ -405,6 +405,7 @@ int CmdTune(const char *Cmd)
 
 int CmdVersion(const char *Cmd)
 {
+
 	clearCommandBuffer();
 	UsbCommand c = {CMD_VERSION};
 	static UsbCommand resp = {0, {0, 0, 0}};
@@ -430,13 +431,11 @@ int CmdStatus(const char *Cmd)
 {
 	uint8_t speed_test_buffer[USB_CMD_DATA_SIZE];
 	sample_buf = speed_test_buffer;
-	#define USB_SPEED_TEST_SIZE (100*USB_CMD_DATA_SIZE)
 
 	clearCommandBuffer();
-	UsbCommand c = {CMD_STATUS, {USB_SPEED_TEST_SIZE}};
+	UsbCommand c = {CMD_STATUS};
 	SendCommand(&c);
-	UsbCommand resp;
-	if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)) {
+	if (!WaitForResponseTimeout(CMD_ACK,&c,1900)) {
 		PrintAndLog("Status command failed. USB Speed Test timed out");
 	}
 	return 0;
@@ -449,40 +448,39 @@ int CmdPing(const char *Cmd)
 	UsbCommand resp;
 	UsbCommand c = {CMD_PING};
 	SendCommand(&c);
-	if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+	if (WaitForResponseTimeout(CMD_ACK,&resp,1000))
 		PrintAndLog("Ping successfull");
-	}else{
-		PrintAndLog("Ping failed");
-	}
-  return 0;
+	else
+		PrintAndLog("Ping failed");	
+	return 0;
 }
 
 static command_t CommandTable[] = 
 {
-  {"help",          CmdHelp,        1, "This help"},
-  {"detectreader",  CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)"},
-  {"fpgaoff",       CmdFPGAOff,     0, "Set FPGA off"},
-  {"lcd",           CmdLCD,         0, "<HEX command> <count> -- Send command/data to LCD"},
-  {"lcdreset",      CmdLCDReset,    0, "Hardware reset LCD"},
-  {"readmem",       CmdReadmem,     0, "[address] -- Read memory at decimal address from flash"},
-  {"reset",         CmdReset,       0, "Reset the Proxmark3"},
-  {"setlfdivisor",  CmdSetDivisor,  0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
-  {"setmux",        CmdSetMux,      0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
-  {"tune",          CmdTune,        0, "Measure antenna tuning"},
-  {"version",       CmdVersion,     0, "Show version information about the connected Proxmark"},
+	{"help",          CmdHelp,        1, "This help"},
+	{"detectreader",  CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)"},
+	{"fpgaoff",       CmdFPGAOff,     0, "Set FPGA off"},
+	{"lcd",           CmdLCD,         0, "<HEX command> <count> -- Send command/data to LCD"},
+	{"lcdreset",      CmdLCDReset,    0, "Hardware reset LCD"},
+	{"readmem",       CmdReadmem,     0, "[address] -- Read memory at decimal address from flash"},
+	{"reset",         CmdReset,       0, "Reset the Proxmark3"},
+	{"setlfdivisor",  CmdSetDivisor,  0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
+	{"setmux",        CmdSetMux,      0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
+	{"tune",          CmdTune,        0, "Measure antenna tuning"},
+	{"version",       CmdVersion,     0, "Show version information about the connected Proxmark"},
 	{"status",        CmdStatus,      0, "Show runtime status information about the connected Proxmark"},
 	{"ping",          CmdPing,        0, "Test if the pm3 is responsive"},
-  {NULL, NULL, 0, NULL}
+	{NULL, NULL, 0, NULL}
 };
 
-int CmdHW(const char *Cmd)
-{
-  CmdsParse(CommandTable, Cmd);
-  return 0;
+int CmdHW(const char *Cmd) {
+	clearCommandBuffer();
+	CmdsParse(CommandTable, Cmd);
+	return 0;
 }
 
 int CmdHelp(const char *Cmd)
 {
-  CmdsHelp(CommandTable);
-  return 0;
+	CmdsHelp(CommandTable);
+	return 0;
 }