X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/aac23b243446e10c96ee93444b2e29dbcc73c08a..8d436e81afab78deb2a9ab450bd61eea546b953f:/armsrc/legicrf.c diff --git a/armsrc/legicrf.c b/armsrc/legicrf.c index ae56dcb5..86c0c360 100644 --- a/armsrc/legicrf.c +++ b/armsrc/legicrf.c @@ -8,192 +8,245 @@ #include "apps.h" #include "legicrf.h" +#include "unistd.h" +#include "stdint.h" static struct legic_frame { - int num_bytes; - int num_bits; - char data[10]; + int bits; + uint16_t data; } current_frame; +AT91PS_TC timer; -static char queries[][4] = { - {7, 0x55}, /* 1010 101 */ -}; -static char responses[][4] = { - {6, 0x3b}, /* 1101 11 */ -}; - -static void frame_send(char *response, int num_bytes, int num_bits) +static void setup_timer(void) { -#if 0 - /* Use the SSC to send a response. 8-bit transfers, LSBit first, 100us per bit */ -#else - /* Bitbang the response */ - AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; - AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; - AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; - - /* Wait for the frame start */ - while(AT91C_BASE_TC1->TC_CV < 490) ; - - int i; - for(i=0; i<(num_bytes*8+num_bits); i++) { - int nextbit = AT91C_BASE_TC1->TC_CV + 150; - int bit = response[i/8] & (1<<(i%8)); - if(bit) - AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; - else - AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; - while(AT91C_BASE_TC1->TC_CV < nextbit) ; - } - AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; -#endif + /* Set up Timer 1 to use for measuring time between pulses. Since we're bit-banging + * this it won't be terribly accurate but should be good enough. + */ + AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1); + timer = AT91C_BASE_TC1; + timer->TC_CCR = AT91C_TC_CLKDIS; + timer->TC_CMR = TC_CMR_TCCLKS_TIMER_CLOCK3; + timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + +/* At TIMER_CLOCK3 (MCK/32) */ +#define RWD_TIME_1 150 /* RWD_TIME_PAUSE off, 80us on = 100us */ +#define RWD_TIME_0 90 /* RWD_TIME_PAUSE off, 40us on = 60us */ +#define RWD_TIME_PAUSE 30 /* 20us */ +#define RWD_TIME_FUZZ 20 /* rather generous 13us, since the peak detector + hysteresis fuzz quite a bit */ +#define TAG_TIME_BIT 150 /* 100us for every bit */ +#define TAG_TIME_WAIT 490 /* time from RWD frame end to tag frame start, experimentally determined */ + } -static void frame_respond(struct legic_frame *f) +#define FUZZ_EQUAL(value, target, fuzz) ((value) > ((target)-(fuzz)) && (value) < ((target)+(fuzz))) + +/* Send a frame in reader mode, the FPGA must have been set up by + * LegicRfReader + */ +static void frame_send_rwd(uint16_t data, int bits) { - LED_D_ON(); - int bitcount = f->num_bytes*8+f->num_bits; - int i, r=-1; - for(i=0; idata[0] == queries[i][1] && f->data[1] == queries[i][2]) { - r = i; - break; + /* Start clock */ + timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ + + int i; + for(i=0; iTC_CV; + int pause_end = starttime + RWD_TIME_PAUSE, bit_end; + int bit = data & 1; + data = data >> 1; + + if(bit) { + bit_end = starttime + RWD_TIME_1; + } else { + bit_end = starttime + RWD_TIME_0; } + + /* RWD_TIME_PAUSE time off, then some time on, so that the complete bit time is + * RWD_TIME_x, where x is the bit to be transmitted */ + AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; + while(timer->TC_CV < pause_end) ; + AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; + while(timer->TC_CV < bit_end) ; } - if(r != -1) { - frame_send(&responses[r][1], responses[r][0]/8, responses[r][0]%8); - LED_A_ON(); - } else { - LED_A_OFF(); + { + /* One final pause to mark the end of the frame */ + int pause_end = timer->TC_CV + RWD_TIME_PAUSE; + AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; + while(timer->TC_CV < pause_end) ; + AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; } - LED_D_OFF(); + /* Reset the timer, to measure time until the start of the tag frame */ + timer->TC_CCR = AT91C_TC_SWTRG; + while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ } -static void frame_append_bit(struct legic_frame *f, int bit) +/* Receive a frame from the card in reader emulation mode, the FPGA and + * timer must have been set up by LegicRfReader and frame_send_rwd. + * + * The LEGIC RF protocol from card to reader does not include explicit + * frame start/stop information or length information. The reader must + * know beforehand how many bits it wants to receive. (Notably: a card + * sending a stream of 0-bits is indistinguishable from no card present.) + * + * Receive methodology: There is a fancy correlator in hi_read_rx_xcorr, but + * I'm not smart enough to use it. Instead I have patched hi_read_tx to output + * the ADC signal with hysteresis on SSP_DIN. Bit-bang that signal and look + * for edges. Count the edges in each bit interval. If they are approximately + * 0 this was a 0-bit, if they are approximately equal to the number of edges + * expected for a 212kHz subcarrier, this was a 1-bit. For timing we use the + * timer that's still running from frame_send_rwd in order to get a synchronization + * with the frame that we just sent. + * + * FIXME: Because we're relying on the hysteresis to just do the right thing + * the range is severely reduced (and you'll probably also need a good antenna). + * So this should be fixed some time in the future for a proper receiver. + */ +static void frame_receive_rwd(struct legic_frame * const f, int bits) { - if(f->num_bytes >= (int)sizeof(f->data)) - return; /* Overflow, won't happen */ - f->data[f->num_bytes] |= (bit<num_bits); - f->num_bits++; - if(f->num_bits > 7) { - f->num_bits = 0; - f->num_bytes++; - } -} + uint16_t the_bit = 1; /* Use a bitmask to save on shifts */ + uint16_t data=0; + int i, old_level=0, edges=0; + int next_bit_at = TAG_TIME_WAIT; + + + if(bits > 16) + bits = 16; -static int frame_is_empty(struct legic_frame *f) -{ - return( (f->num_bytes*8 + f->num_bits) <= 4 ); + AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; + AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; + + while(timer->TC_CV < next_bit_at) ; + next_bit_at += TAG_TIME_BIT; + + for(i=0; iTC_CV < next_bit_at) { + int level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); + if(level != old_level) + edges++; + old_level = level; + } + next_bit_at += TAG_TIME_BIT; + + if(edges > 20 && edges < 60) { /* expected are 42 edges */ + data |= the_bit; + } + + + the_bit <<= 1; + } + + f->data = data; + f->bits = bits; + + /* Reset the timer, to synchronize the next frame */ + timer->TC_CCR = AT91C_TC_SWTRG; + while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ } -static void frame_handle(struct legic_frame *f) +static void frame_clean(struct legic_frame * const f) { - if(f->num_bytes == 0 && f->num_bits == 6) { - /* Short path */ - return; - } - if( !frame_is_empty(f) ) { - frame_respond(f); - } + f->data = 0; + f->bits = 0; } -static void frame_clean(struct legic_frame *f) +static uint16_t perform_setup_phase_rwd(void) { - if(!frame_is_empty(f)) - /* memset(f->data, 0, sizeof(f->data)); */ - f->data[0] = f->data[1] = 0; - f->num_bits = 0; - f->num_bytes = 0; + + /* Switch on carrier and let the tag charge for 1ms */ + AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; + SpinDelay(1); + + frame_send_rwd(0x55, 7); + frame_clean(¤t_frame); + frame_receive_rwd(¤t_frame, 6); + while(timer->TC_CV < 387) ; /* ~ 258us */ + frame_send_rwd(0x019, 6); + + return current_frame.data ^ 0x26; } -static void emit(int bit) +static void switch_off_tag_rwd(void) { - if(bit == -1) { - frame_handle(¤t_frame); - frame_clean(¤t_frame); - } else if(bit == 0) { - frame_append_bit(¤t_frame, 0); - } else if(bit == 1) { - frame_append_bit(¤t_frame, 1); - } + /* Switch off carrier, make sure tag is reset */ + AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; + SpinDelay(10); + + WDT_HIT(); } -void LegicRfSimulate(void) +void LegicRfReader(void) { - /* ADC path high-frequency peak detector, FPGA in high-frequency simulator mode, - * modulation mode set to 212kHz subcarrier. We are getting the incoming raw - * envelope waveform on DIN and should send our response on DOUT. - * - * The LEGIC RF protocol is pulse-pause-encoding from reader to card, so we'll - * measure the time between two rising edges on DIN, and no encoding on the - * subcarrier from card to reader, so we'll just shift out our verbatim data - * on DOUT, 1 bit is 100us. The time from reader to card frame is still unclear, - * seems to be 300us-ish. - */ SetAdcMuxFor(GPIO_MUXSEL_HIPKD); FpgaSetupSsc(); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_212K); + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX); - /* Bitbang the receiver */ - AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; - AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; + /* Bitbang the transmitter */ + AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; + AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; + AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; - /* Set up Timer 1 to use for measuring time between pulses. Since we're bit-banging - * this it won't be terribly accurate but should be good enough. - */ - AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1); - AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; - AT91C_BASE_TC1->TC_CMR = TC_CMR_TCCLKS_TIMER_CLOCK3; - AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; - int old_level = 0; - -/* At TIMER_CLOCK3 (MCK/32) */ -#define BIT_TIME_1 150 -#define BIT_TIME_0 90 -#define BIT_TIME_FUZZ 20 - - int active = 0; - while(!BUTTON_PRESS()) { - int level = !!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); - int time = AT91C_BASE_TC1->TC_CV; - - if(level != old_level) { - if(level == 1) { - AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; - if(time > (BIT_TIME_1-BIT_TIME_FUZZ) && time < (BIT_TIME_1+BIT_TIME_FUZZ)) { - /* 1 bit */ - emit(1); - active = 1; - LED_B_ON(); - } else if(time > (BIT_TIME_0-BIT_TIME_FUZZ) && time < (BIT_TIME_0+BIT_TIME_FUZZ)) { - /* 0 bit */ - emit(0); - active = 1; - LED_B_ON(); - } else if(active) { - /* invalid */ - emit(-1); - active = 0; - LED_B_OFF(); - } - } - } - - if(time >= (BIT_TIME_1+BIT_TIME_FUZZ) && active) { - /* Frame end */ - emit(-1); - active = 0; - LED_B_OFF(); + setup_timer(); + + memset(BigBuf, 0, 1024); + + int byte_index = 0, card_size = 0, command_size = 0; + uint16_t command_obfuscation = 0x57, response_obfuscation = 0; + uint16_t tag_type = perform_setup_phase_rwd(); + switch_off_tag_rwd(); + + int error = 0; + switch(tag_type) { + case 0x1d: + DbpString("MIM 256 card found, reading card ..."); + command_size = 9; + card_size = 256; + response_obfuscation = 0x52; + break; + case 0x3d: + DbpString("MIM 1024 card found, reading card ..."); + command_size = 11; + card_size = 1024; + response_obfuscation = 0xd4; + break; + default: + DbpString("No or unknown card found, aborting"); + error = 1; + break; + } + + LED_B_ON(); + while(!BUTTON_PRESS() && (byte_index= (20*BIT_TIME_1) && (AT91C_BASE_TC1->TC_SR & AT91C_TC_CLKSTA)) { - AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; - } + while(timer->TC_CV < 387) ; /* ~ 258us */ + frame_send_rwd(command_obfuscation ^ (byte_index<<1), command_size); + frame_clean(¤t_frame); + frame_receive_rwd(¤t_frame, 8); + ((uint8_t*)BigBuf)[byte_index] = (current_frame.data ^ response_obfuscation) & 0xff; + switch_off_tag_rwd(); - old_level = level; WDT_HIT(); + byte_index++; + if(byte_index & 0x04) LED_C_ON(); else LED_C_OFF(); + } + LED_B_OFF(); + LED_C_OFF(); + + if(!error) { + if(card_size == 256) { + DbpString("Card read, use hexsamples 256 to view results"); + } else if(card_size == 1024) { + DbpString("Card read, use hexsamples 1024 to view results"); + } } }