X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/b35e04a7c6a8b6c99fcdc8f45e387437cbae4f08..1963cc9fe0ab7d6ddd04c5f8b4f27af836e98335:/fpga/hi_iso14443a.v diff --git a/fpga/hi_iso14443a.v b/fpga/hi_iso14443a.v index b1b7b141..e460a2cc 100644 --- a/fpga/hi_iso14443a.v +++ b/fpga/hi_iso14443a.v @@ -3,29 +3,20 @@ // Gerhard de Koning Gans, April 2008 //----------------------------------------------------------------------------- -// constants for the different modes: -`define SNIFFER 3'b000 -`define TAGSIM_LISTEN 3'b001 -`define TAGSIM_MOD 3'b010 -`define READER_LISTEN 3'b011 -`define READER_MOD 3'b100 - module hi_iso14443a( - pck0, ck_1356meg, ck_1356megb, + ck_1356meg, pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4, adc_d, adc_clk, ssp_frame, ssp_din, ssp_dout, ssp_clk, - cross_hi, cross_lo, dbg, mod_type ); - input pck0, ck_1356meg, ck_1356megb; + input ck_1356meg; output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4; input [7:0] adc_d; output adc_clk; input ssp_dout; output ssp_frame, ssp_din, ssp_clk; - input cross_hi, cross_lo; output dbg; input [2:0] mod_type; @@ -151,7 +142,7 @@ begin end // adjust internal timer counter if necessary: - if (negedge_cnt[3:0] == 4'd13 && (mod_type == `SNIFFER || mod_type == `TAGSIM_LISTEN) && deep_modulation) + if (negedge_cnt[3:0] == 4'd13 && (mod_type == `FPGA_HF_ISO14443A_SNIFFER || mod_type == `FPGA_HF_ISO14443A_TAGSIM_LISTEN) && deep_modulation) begin if (reader_falling_edge_time == 4'd1) // reader signal changes right after sampling. Better sample earlier next time. begin @@ -185,7 +176,7 @@ reg [3:0] mod_detect_reset_time; always @(negedge adc_clk) begin - if (mod_type == `READER_LISTEN) + if (mod_type == `FPGA_HF_ISO14443A_READER_LISTEN) // (our) reader signal changes at negedge_cnt[3:0]=9, tag response expected to start n*16+4 ticks later, further delayed by // 3 ticks ADC conversion. The maximum filter output (edge detected) will be detected after subcarrier zero crossing (+7 ticks). // To allow some timing variances, we want to have the maximum filter outputs well within the detection window, i.e. @@ -195,7 +186,7 @@ begin mod_detect_reset_time <= 4'd4; end else - if (mod_type == `SNIFFER) + if (mod_type == `FPGA_HF_ISO14443A_SNIFFER) begin // detect a rising edge of reader's signal and sync modulation detector to the tag's answer: if (~pre_after_hysteresis && after_hysteresis && deep_modulation) @@ -320,7 +311,7 @@ reg [3:0] sub_carrier_cnt; // response window of 1128 - 774 = 354 ticks. // reset on a pause in listen mode. I.e. the counter starts when the pause is over: -assign fdt_reset = ~after_hysteresis && mod_type == `TAGSIM_LISTEN; +assign fdt_reset = ~after_hysteresis && mod_type == `FPGA_HF_ISO14443A_TAGSIM_LISTEN; always @(negedge adc_clk) begin @@ -363,7 +354,7 @@ reg mod_sig_coil; always @(negedge adc_clk) begin - if (mod_type == `TAGSIM_MOD) // need to take care of proper fdt timing + if (mod_type == `FPGA_HF_ISO14443A_TAGSIM_MOD) // need to take care of proper fdt timing begin if(fdt_counter == `FDT_COUNT) begin @@ -438,7 +429,7 @@ always @(negedge adc_clk) begin if (negedge_cnt[5:0] == 6'd63) // fill the buffer begin - if (mod_type == `SNIFFER) + if (mod_type == `FPGA_HF_ISO14443A_SNIFFER) begin if(deep_modulation) // a reader is sending (or there's no field at all) begin @@ -455,7 +446,7 @@ begin end end - if(negedge_cnt[2:0] == 3'b000 && mod_type == `SNIFFER) // shift at double speed + if(negedge_cnt[2:0] == 3'b000 && mod_type == `FPGA_HF_ISO14443A_SNIFFER) // shift at double speed begin // Don't shift if we just loaded new data, obviously. if(negedge_cnt[5:0] != 6'd0) @@ -464,7 +455,7 @@ begin end end - if(negedge_cnt[3:0] == 4'b0000 && mod_type != `SNIFFER) + if(negedge_cnt[3:0] == 4'b0000 && mod_type != `FPGA_HF_ISO14443A_SNIFFER) begin // Don't shift if we just loaded new data, obviously. if(negedge_cnt[6:0] != 7'd0) @@ -484,8 +475,8 @@ reg ssp_frame; always @(negedge adc_clk) begin - if(mod_type == `SNIFFER) - // SNIFFER mode (ssp_clk = adc_clk / 8, ssp_frame clock = adc_clk / 64)): + if(mod_type == `FPGA_HF_ISO14443A_SNIFFER) + // FPGA_HF_ISO14443A_SNIFFER mode (ssp_clk = adc_clk / 8, ssp_frame clock = adc_clk / 64)): begin if(negedge_cnt[2:0] == 3'd0) ssp_clk <= 1'b1; @@ -505,7 +496,7 @@ begin if(negedge_cnt[3:0] == 4'd8) ssp_clk <= 1'b0; - if(negedge_cnt[6:0] == 7'd7) // ssp_frame rising edge indicates start of frame + if(negedge_cnt[6:0] == 7'd7) // ssp_frame rising edge indicates start of frame, sampled on falling edge of ssp_clk ssp_frame <= 1'b1; if(negedge_cnt[6:0] == 7'd23) ssp_frame <= 1'b0; @@ -525,23 +516,23 @@ begin if(negedge_cnt[3:0] == 4'd0) begin // What do we communicate to the ARM - if(mod_type == `TAGSIM_LISTEN) + if(mod_type == `FPGA_HF_ISO14443A_TAGSIM_LISTEN) sendbit = after_hysteresis; - else if(mod_type == `TAGSIM_MOD) + else if(mod_type == `FPGA_HF_ISO14443A_TAGSIM_MOD) /* if(fdt_counter > 11'd772) sendbit = mod_sig_coil; // huh? else */ sendbit = fdt_indicator; - else if (mod_type == `READER_LISTEN) + else if (mod_type == `FPGA_HF_ISO14443A_READER_LISTEN) sendbit = curbit; else sendbit = 1'b0; end - if(mod_type == `SNIFFER) + if(mod_type == `FPGA_HF_ISO14443A_SNIFFER) // send sampled reader and tag data: bit_to_arm = to_arm[7]; - else if (mod_type == `TAGSIM_MOD && fdt_elapsed && temp_buffer_reset) + else if (mod_type == `FPGA_HF_ISO14443A_TAGSIM_MOD && fdt_elapsed && temp_buffer_reset) // send timing information: bit_to_arm = to_arm[7]; else @@ -554,22 +545,22 @@ end assign ssp_din = bit_to_arm; -// Subcarrier (adc_clk/16, for TAGSIM_MOD only). +// Subcarrier (adc_clk/16, for FPGA_HF_ISO14443A_TAGSIM_MOD only). wire sub_carrier; assign sub_carrier = ~sub_carrier_cnt[3]; -// in READER_MOD: drop carrier for mod_sig_coil==1 (pause); in READER_LISTEN: carrier always on; in other modes: carrier always off -assign pwr_hi = (ck_1356megb & (((mod_type == `READER_MOD) & ~mod_sig_coil) || (mod_type == `READER_LISTEN))); +// in FPGA_HF_ISO14443A_READER_MOD: drop carrier for mod_sig_coil==1 (pause); in FPGA_HF_ISO14443A_READER_LISTEN: carrier always on; in other modes: carrier always off +assign pwr_hi = (ck_1356meg & (((mod_type == `FPGA_HF_ISO14443A_READER_MOD) & ~mod_sig_coil) || (mod_type == `FPGA_HF_ISO14443A_READER_LISTEN))); // Enable HF antenna drivers: assign pwr_oe1 = 1'b0; assign pwr_oe3 = 1'b0; -// TAGSIM_MOD: short circuit antenna with different resistances (modulated by sub_carrier modulated by mod_sig_coil) +// FPGA_HF_ISO14443A_TAGSIM_MOD: short circuit antenna with different resistances (modulated by sub_carrier modulated by mod_sig_coil) // for pwr_oe4 = 1 (tristate): antenna load = 10k || 33 = 32,9 Ohms // for pwr_oe4 = 0 (active): antenna load = 10k || 33 || 33 = 16,5 Ohms -assign pwr_oe4 = mod_sig_coil & sub_carrier & (mod_type == `TAGSIM_MOD); +assign pwr_oe4 = mod_sig_coil & sub_carrier & (mod_type == `FPGA_HF_ISO14443A_TAGSIM_MOD); // This is all LF, so doesn't matter. assign pwr_oe2 = 1'b0;