X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/b67f7ec359806293a6da14208bad56b842dedb60..161c40fb528ca13e5f7337b2796cf22e2de64ce5:/common/protocols.c diff --git a/common/protocols.c b/common/protocols.c index bdaff3f1..795f3eaa 100644 --- a/common/protocols.c +++ b/common/protocols.c @@ -1,19 +1,46 @@ -#include -#include +#include #include #include +#include "protocols.h" +// ATA55xx shared presets & routines +uint32_t GetT55xxClockBit(uint32_t clock) { + switch (clock) { + case 128: + return T55x7_BITRATE_RF_128; + case 100: + return T55x7_BITRATE_RF_100; + case 64: + return T55x7_BITRATE_RF_64; + case 50: + return T55x7_BITRATE_RF_50; + case 40: + return T55x7_BITRATE_RF_40; + case 32: + return T55x7_BITRATE_RF_32; + case 16: + return T55x7_BITRATE_RF_16; + case 8: + return T55x7_BITRATE_RF_8; + default: + return 0; + } +} -typedef struct { - uint8_t app_limit; - uint8_t otp[2]; - uint8_t block_writelock; - uint8_t chip_config; - uint8_t mem_config; - uint8_t eas; - uint8_t fuses; -}picopass_conf_block; +#ifndef ON_DEVICE +#include "ui.h" +#define prnt PrintAndLog +// iclass / picopass chip config structures and shared routines +typedef struct { + uint8_t app_limit; //[8] + uint8_t otp[2]; //[9-10] + uint8_t block_writelock;//[11] + uint8_t chip_config; //[12] + uint8_t mem_config; //[13] + uint8_t eas; //[14] + uint8_t fuses; //[15] +} picopass_conf_block; typedef struct { uint8_t csn[8]; @@ -22,87 +49,99 @@ typedef struct { uint8_t key_d[8]; uint8_t key_c[8]; uint8_t app_issuer_area[8]; +} picopass_hdr; -}picopass_hdr; - -#define FUSE_FPERS 0x80 -#define FUSE_CODING1 0x40 -#define FUSE_CODING0 0x20 -#define FUSE_CRYPT1 0x10 -#define FUSE_CRYPT0 0x08 -#define FUSE_FPROD1 0x04 -#define FUSE_FPROD0 0x02 -#define FUSE_RA 0x01 - -//#define prnt printf -void prnt(char *fmt,...) -{ - va_list argptr; - va_start(argptr, fmt); - vprintf(fmt, argptr); - printf(" "); // cleaning prompt - va_end(argptr); - printf("\n"); -} - -uint8_t isset(uint8_t val, uint8_t mask) -{ +uint8_t isset(uint8_t val, uint8_t mask) { return (val & mask); } -uint8_t notset(uint8_t val, uint8_t mask){ +uint8_t notset(uint8_t val, uint8_t mask) { return !(val & mask); } -void fuse_config(const picopass_hdr *hdr) -{ +void fuse_config(const picopass_hdr *hdr) { uint8_t fuses = hdr->conf.fuses; - if (isset(fuses,FUSE_FPERS))prnt(" Mode: Personalization [Programmable]"); - else prnt(" Mode: Application [Locked]"); + if (isset(fuses,FUSE_FPERS))prnt(" Mode: Personalization [Programmable]"); + else prnt(" Mode: Application [Locked]"); if (isset(fuses, FUSE_CODING1)) - prnt(" Coding: RFU"); + prnt("Coding: RFU"); else { - if( isset( fuses , FUSE_CODING0)) prnt(" Coding: ISO 14443-2 B/ISO 15693"); - else prnt(" Coding: ISO 14443B only"); + if( isset( fuses , FUSE_CODING0)) prnt("Coding: ISO 14443-2 B/ISO 15693"); + else prnt("Coding: ISO 14443B only"); } - if( isset (fuses,FUSE_CRYPT1 | FUSE_CRYPT0 )) prnt(" Crypt: Secured page, keys not locked"); - if( isset (fuses,FUSE_CRYPT1) && notset( fuses, FUSE_CRYPT0 )) prnt(" Crypt: Secured page, keys not locked"); - if( notset (fuses,FUSE_CRYPT1) && isset( fuses, FUSE_CRYPT0 )) prnt(" Crypt: Non secured page"); - if( notset (fuses,FUSE_CRYPT1) && notset( fuses, FUSE_CRYPT0 )) prnt(" Crypt: No auth possible. Read only if RA is enabled"); + if( isset (fuses,FUSE_CRYPT1 | FUSE_CRYPT0 )) prnt(" Crypt: Secured page, keys not locked"); + if( isset (fuses,FUSE_CRYPT1) && notset( fuses, FUSE_CRYPT0 )) prnt(" Crypt: Secured page, keys not locked"); + if( notset (fuses,FUSE_CRYPT1) && isset( fuses, FUSE_CRYPT0 )) prnt(" Crypt: Non secured page"); + if( notset (fuses,FUSE_CRYPT1) && notset( fuses, FUSE_CRYPT0 )) prnt(" Crypt: No auth possible. Read only if RA is enabled"); - if( isset( fuses, FUSE_RA)) prnt(" RA: Read access enabled"); - else prnt(" RA: Read access not enabled"); + if( isset( fuses, FUSE_RA)) prnt(" RA: Read access enabled"); + else prnt(" RA: Read access not enabled"); } -void mem_config(const picopass_hdr *hdr) -{ - uint8_t mem = hdr->conf.mem_config; - if( isset (mem, 0x80)) prnt(" Mem: 16KBits (255 * 8 bytes)"); - else prnt(" Mem: 2 KBits ( 32 * 8 bytes)"); +void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb) { + // mem-bit 5, mem-bit 7, chip-bit 4: defines chip type + if(isset(chip_cfg, 0x10) && notset(mem_cfg, 0x80) && notset(mem_cfg, 0x20)) { + *kb = 2; + *app_areas = 2; + *max_blk = 31; + } else if(isset(chip_cfg, 0x10) && isset(mem_cfg, 0x80) && notset(mem_cfg, 0x20)) { + *kb = 16; + *app_areas = 2; + *max_blk = 255; //16kb + } else if(notset(chip_cfg, 0x10) && notset(mem_cfg, 0x80) && notset(mem_cfg, 0x20)) { + *kb = 16; + *app_areas = 16; + *max_blk = 255; //16kb + } else if(isset(chip_cfg, 0x10) && isset(mem_cfg, 0x80) && isset(mem_cfg, 0x20)) { + *kb = 32; + *app_areas = 3; + *max_blk = 255; //16kb + } else if(notset(chip_cfg, 0x10) && notset(mem_cfg, 0x80) && isset(mem_cfg, 0x20)) { + *kb = 32; + *app_areas = 17; + *max_blk = 255; //16kb + } else { + *kb = 32; + *app_areas = 2; + *max_blk = 255; + } } -void applimit_config(const picopass_hdr *hdr) -{ + +void mem_app_config(const picopass_hdr *hdr) { + uint8_t mem = hdr->conf.mem_config; + uint8_t chip = hdr->conf.chip_config; uint8_t applimit = hdr->conf.app_limit; - prnt(" AA1: blocks 6-%d", applimit); - prnt(" AA2: blocks %d-", (applimit+1)); + if (applimit < 6) applimit = 26; + uint8_t kb = 2; + uint8_t app_areas = 2; + uint8_t max_blk = 31; + getMemConfig(mem, chip, &max_blk, &app_areas, &kb); + prnt(" Mem: %u KBits/%u App Areas (%u * 8 bytes) [%02X]", kb, app_areas, max_blk, mem); + prnt(" AA1: blocks 06-%02X", applimit); + prnt(" AA2: blocks %02X-%02X", applimit+1, max_blk); } -void print_picopass_info(const picopass_hdr *hdr) -{ +void print_picopass_info(const picopass_hdr *hdr) { fuse_config(hdr); - mem_config(hdr); - applimit_config(hdr); + mem_app_config(hdr); } -void test() -{ +void printIclassDumpInfo(uint8_t* iclass_dump) { + print_picopass_info((picopass_hdr *) iclass_dump); +} + +/* +void test() { picopass_hdr hdr = {0x27,0xaf,0x48,0x01,0xf9,0xff,0x12,0xe0,0x12,0xff,0xff,0xff,0x7f,0x1f,0xff,0x3c}; prnt("Picopass configuration:"); print_picopass_info(&hdr); } -int main(int argc, char *argv[]) -{ +int main(int argc, char *argv[]) { test(); return 0; } +*/ + +#endif +//ON_DEVICE