X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/bce5d24494997238052d7f3fa7a3b89df43bce9f..45095b01789279d8608a52c805a642e8b6a3ac7d:/armsrc/hitag2.c diff --git a/armsrc/hitag2.c b/armsrc/hitag2.c index 27a5d508..6a072bf4 100644 --- a/armsrc/hitag2.c +++ b/armsrc/hitag2.c @@ -21,37 +21,16 @@ #include "util.h" #include "hitag2.h" #include "string.h" +#include "BigBuf.h" static bool bQuiet; -bool bCrypto; -bool bAuthenticating; -bool bPwd; -bool bSuccessful; +static bool bCrypto; +static bool bAuthenticating; +static bool bPwd; +static bool bSuccessful; + -int LogTraceHitag(const uint8_t * btBytes, int iBits, int iSamples, uint32_t dwParity, int bReader) -{ - // Return when trace is full - if (traceLen >= TRACE_SIZE) return FALSE; - - // Trace the random, i'm curious - rsamples += iSamples; - trace[traceLen++] = ((rsamples >> 0) & 0xff); - trace[traceLen++] = ((rsamples >> 8) & 0xff); - trace[traceLen++] = ((rsamples >> 16) & 0xff); - trace[traceLen++] = ((rsamples >> 24) & 0xff); - if (!bReader) { - trace[traceLen - 1] |= 0x80; - } - trace[traceLen++] = ((dwParity >> 0) & 0xff); - trace[traceLen++] = ((dwParity >> 8) & 0xff); - trace[traceLen++] = ((dwParity >> 16) & 0xff); - trace[traceLen++] = ((dwParity >> 24) & 0xff); - trace[traceLen++] = iBits; - memcpy(trace + traceLen, btBytes, nbytes(iBits)); - traceLen += nbytes(iBits); - return TRUE; -} struct hitag2_tag { uint32_t uid; @@ -85,21 +64,17 @@ static struct hitag2_tag tag = { }, }; -//#define TRACE_LENGTH 3000 -//uint8_t *trace = (uint8_t *) BigBuf; -//int traceLen = 0; -//int rsamples = 0; +// ToDo: define a meaningful maximum size for auth_table. The bigger this is, the lower will be the available memory for traces. +// Historically it used to be FREE_BUFFER_SIZE, which was 2744. +#define AUTH_TABLE_LENGTH 2744 +static byte_t* auth_table; +static size_t auth_table_pos = 0; +static size_t auth_table_len = AUTH_TABLE_LENGTH; -#define AUTH_TABLE_OFFSET FREE_BUFFER_OFFSET -#define AUTH_TABLE_LENGTH FREE_BUFFER_SIZE -byte_t* auth_table = (byte_t *)BigBuf+AUTH_TABLE_OFFSET; -size_t auth_table_pos = 0; -size_t auth_table_len = AUTH_TABLE_LENGTH; - -byte_t password[4]; -byte_t NrAr[8]; -byte_t key[8]; -uint64_t cipher_state; +static byte_t password[4]; +static byte_t NrAr[8]; +static byte_t key[8]; +static uint64_t cipher_state; /* Following is a modified version of cryptolib.com/ciphers/hitag2/ */ // Software optimized 48-bit Philips/NXP Mifare Hitag2 PCF7936/46/47/52 stream cipher algorithm by I.C. Wiener 2006-2007. @@ -177,14 +152,14 @@ static u32 _hitag2_byte (u64 * x) return c; } -int hitag2_reset(void) +static int hitag2_reset(void) { tag.state = TAG_STATE_RESET; tag.crypto_active = 0; return 0; } -int hitag2_init(void) +static int hitag2_init(void) { // memcpy(&tag, &resetdata, sizeof(tag)); hitag2_reset(); @@ -300,7 +275,8 @@ static void hitag_send_frame(const byte_t* frame, size_t frame_len) LOW(GPIO_SSC_DOUT); } -void hitag2_handle_reader_command(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) + +static void hitag2_handle_reader_command(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { byte_t rx_air[HITAG_FRAME_LEN]; @@ -364,7 +340,7 @@ void hitag2_handle_reader_command(byte_t* rx, const size_t rxlen, byte_t* tx, si // Unknown command default: - Dbprintf("Uknown command: %02x %02x",rx[0],rx[1]); + Dbprintf("Unknown command: %02x %02x",rx[0],rx[1]); return; break; } @@ -435,7 +411,7 @@ static void hitag_reader_send_bit(int bit) { // Binary puls length modulation (BPLM) is used to encode the data stream // This means that a transmission of a one takes longer than that of a zero - // Enable modulation, which means, drop the the field + // Enable modulation, which means, drop the field HIGH(GPIO_SSC_DOUT); // Wait for 4-10 times the carrier period @@ -457,6 +433,7 @@ static void hitag_reader_send_bit(int bit) { LED_A_OFF(); } + static void hitag_reader_send_frame(const byte_t* frame, size_t frame_len) { // Send the content of the frame @@ -465,7 +442,7 @@ static void hitag_reader_send_frame(const byte_t* frame, size_t frame_len) } // Send EOF AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG; - // Enable modulation, which means, drop the the field + // Enable modulation, which means, drop the field HIGH(GPIO_SSC_DOUT); // Wait for 4-10 times the carrier period while(AT91C_BASE_TC0->TC_CV < T0*6); @@ -475,7 +452,7 @@ static void hitag_reader_send_frame(const byte_t* frame, size_t frame_len) size_t blocknr; -bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { +static bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { // Reset the transmission frame length *txlen = 0; @@ -530,7 +507,7 @@ bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) return true; } -bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { +static bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { // Reset the transmission frame length *txlen = 0; @@ -623,7 +600,7 @@ bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { } -bool hitag2_authenticate(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { +static bool hitag2_authenticate(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { // Reset the transmission frame length *txlen = 0; @@ -663,7 +640,9 @@ bool hitag2_authenticate(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txl return true; } -bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { + +static bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { + // Reset the transmission frame length *txlen = 0; @@ -675,17 +654,17 @@ bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_ if (bCrypto) { Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed, removed entry!",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]); - // Removing failed entry from authentiations table - memcpy(auth_table+auth_table_pos,auth_table+auth_table_pos+8,8); - auth_table_len -= 8; + // Removing failed entry from authentiations table + memcpy(auth_table+auth_table_pos,auth_table+auth_table_pos+8,8); + auth_table_len -= 8; - // Return if we reached the end of the authentiactions table + // Return if we reached the end of the authentications table bCrypto = false; if (auth_table_pos == auth_table_len) { return false; } - - // Copy the next authentication attempt in row (at the same position, b/c we removed last failed entry) + + // Copy the next authentication attempt in row (at the same position, b/c we removed last failed entry) memcpy(NrAr,auth_table+auth_table_pos,8); } *txlen = 5; @@ -718,6 +697,43 @@ bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_ return true; } +static bool hitag2_read_uid(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { + // Reset the transmission frame length + *txlen = 0; + + // Try to find out which command was send by selecting on length (in bits) + switch (rxlen) { + // No answer, try to resurrect + case 0: { + // Just starting or if there is no answer + *txlen = 5; + memcpy(tx,"\xc0",nbytes(*txlen)); + } break; + // Received UID + case 32: { + // Check if we received answer tag (at) + if (bAuthenticating) { + bAuthenticating = false; + } else { + // Store the received block + memcpy(tag.sectors[blocknr],rx,4); + blocknr++; + } + if (blocknr > 0) { + //DbpString("Read successful!"); + bSuccessful = true; + return false; + } + } break; + // Unexpected response + default: { + Dbprintf("Uknown frame length: %d",rxlen); + return false; + } break; + } + return true; +} + void SnoopHitag(uint32_t type) { int frame_count; int response; @@ -730,21 +746,25 @@ void SnoopHitag(uint32_t type) { byte_t rx[HITAG_FRAME_LEN]; size_t rxlen=0; - // Clean up trace and prepare it for storing frames - iso14a_set_tracing(TRUE); - iso14a_clear_trace(); + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + // Clean up trace and prepare it for storing frames + set_tracing(TRUE); + clear_trace(); + auth_table_len = 0; auth_table_pos = 0; + + BigBuf_free(); + auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH); memset(auth_table, 0x00, AUTH_TABLE_LENGTH); - + DbpString("Starting Hitag2 snoop"); LED_D_ON(); // Set up eavesdropping mode, frequency divisor which will drive the FPGA // and analog mux selection. - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_TOGGLE_MODE); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz SetAdcMuxFor(GPIO_MUXSEL_LOPKD); RELAY_OFF(); @@ -760,7 +780,7 @@ void SnoopHitag(uint32_t type) { AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1); AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME; - // Disable timer during configuration + // Disable timer during configuration AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; // Capture mode, defaul timer source = MCK/2 (TIMER_CLOCK1), TIOA is external trigger, @@ -940,11 +960,17 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) { bool bQuitTraceFull = false; bQuiet = false; + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + // Clean up trace and prepare it for storing frames - iso14a_set_tracing(TRUE); - iso14a_clear_trace(); + set_tracing(TRUE); + clear_trace(); + auth_table_len = 0; auth_table_pos = 0; + byte_t* auth_table; + BigBuf_free(); + auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH); memset(auth_table, 0x00, AUTH_TABLE_LENGTH); DbpString("Starting Hitag2 simulation"); @@ -967,8 +993,7 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) { // Set up simulator mode, frequency divisor which will drive the FPGA // and analog mux selection. - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz SetAdcMuxFor(GPIO_MUXSEL_LOPKD); RELAY_OFF(); @@ -1126,56 +1151,60 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { bool bStop; bool bQuitTraceFull = false; - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); - // Reset the return status - bSuccessful = false; + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + // Reset the return status + bSuccessful = false; // Clean up trace and prepare it for storing frames - iso14a_set_tracing(TRUE); - iso14a_clear_trace(); - DbpString("Starting Hitag reader family"); + set_tracing(TRUE); + clear_trace(); + + //DbpString("Starting Hitag reader family"); // Check configuration switch(htf) { case RHT2F_PASSWORD: { - Dbprintf("List identifier in password mode"); + Dbprintf("List identifier in password mode"); memcpy(password,htd->pwd.password,4); - blocknr = 0; + blocknr = 0; bQuitTraceFull = false; bQuiet = false; bPwd = false; } break; - case RHT2F_AUTHENTICATE: { DbpString("Authenticating using nr,ar pair:"); memcpy(NrAr,htd->auth.NrAr,8); Dbhexdump(8,NrAr,false); bQuiet = false; bCrypto = false; - bAuthenticating = false; + bAuthenticating = false; bQuitTraceFull = true; } break; - case RHT2F_CRYPTO: { DbpString("Authenticating using key:"); - memcpy(key,htd->crypto.key,4); //HACK; 4 or 6?? I read both in the code. + memcpy(key,htd->crypto.key,6); //HACK; 4 or 6?? I read both in the code. Dbhexdump(6,key,false); - blocknr = 0; + blocknr = 0; bQuiet = false; bCrypto = false; - bAuthenticating = false; + bAuthenticating = false; bQuitTraceFull = true; } break; - case RHT2F_TEST_AUTH_ATTEMPTS: { Dbprintf("Testing %d authentication attempts",(auth_table_len/8)); auth_table_pos = 0; - memcpy(NrAr,auth_table,8); + memcpy(NrAr, auth_table, 8); bQuitTraceFull = false; bQuiet = false; bCrypto = false; } break; - + case RHT2F_UID_ONLY: { + blocknr = 0; + bQuiet = false; + bCrypto = false; + bAuthenticating = false; + bQuitTraceFull = true; + } break; default: { Dbprintf("Error, unknown function: %d",htf); return; @@ -1232,22 +1261,22 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { // hitagS settings reset_sof = 1; t_wait = 200; - DbpString("Configured for hitagS reader"); + //DbpString("Configured for hitagS reader"); } else if (htf < 20) { // hitag1 settings reset_sof = 1; t_wait = 200; - DbpString("Configured for hitag1 reader"); + //DbpString("Configured for hitag1 reader"); } else if (htf < 30) { // hitag2 settings reset_sof = 4; t_wait = HITAG_T_WAIT_2; - DbpString("Configured for hitag2 reader"); + //DbpString("Configured for hitag2 reader"); } else { Dbprintf("Error, unknown hitag reader type: %d",htf); return; } - + uint8_t attempt_count=0; while(!bStop && !BUTTON_PRESS()) { // Watchdog hit WDT_HIT(); @@ -1282,6 +1311,11 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { case RHT2F_TEST_AUTH_ATTEMPTS: { bStop = !hitag2_test_auth_attempts(rx,rxlen,tx,&txlen); } break; + case RHT2F_UID_ONLY: { + bStop = !hitag2_read_uid(rx, rxlen, tx, &txlen); + attempt_count++; //attempt 3 times to get uid then quit + if (!bStop && attempt_count == 3) bStop = true; + } break; default: { Dbprintf("Error, unknown function: %d",htf); return; @@ -1298,6 +1332,8 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { // we need to wait (T_Wait2 + half_tag_period) when the last was a 'one'. // All timer values are in terms of T0 units while(AT91C_BASE_TC0->TC_CV < T0*(t_wait+(HITAG_T_TAG_HALF_PERIOD*lastbit))); + + //Dbprintf("DEBUG: Sending reader frame"); // Transmit the reader frame hitag_reader_send_frame(tx,txlen); @@ -1327,7 +1363,9 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { bSkip = true; tag_sof = reset_sof; response = 0; - + //Dbprintf("DEBUG: Waiting to receive frame"); + uint32_t errorCount = 0; + // Receive frame, watch for at most T0*EOF periods while (AT91C_BASE_TC1->TC_CV < T0*HITAG_T_WAIT_MAX) { // Check if falling edge in tag modulation is detected @@ -1343,19 +1381,29 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { // Capture tag frame (manchester decoding using only falling edges) if(ra >= HITAG_T_EOF) { if (rxlen != 0) { - //DbpString("wierd1?"); + //Dbprintf("DEBUG: Wierd1"); } // Capture the T0 periods that have passed since last communication or field drop (reset) // We always recieve a 'one' first, which has the falling edge after a half period |-_| response = ra-HITAG_T_TAG_HALF_PERIOD; } else if(ra >= HITAG_T_TAG_CAPTURE_FOUR_HALF) { // Manchester coding example |-_|_-|-_| (101) + + //need to test to verify we don't exceed memory... + //if ( ((rxlen+2) / 8) > HITAG_FRAME_LEN) { + // break; + //} rx[rxlen / 8] |= 0 << (7-(rxlen%8)); rxlen++; rx[rxlen / 8] |= 1 << (7-(rxlen%8)); rxlen++; } else if(ra >= HITAG_T_TAG_CAPTURE_THREE_HALF) { // Manchester coding example |_-|...|_-|-_| (0...01) + + //need to test to verify we don't exceed memory... + //if ( ((rxlen+2) / 8) > HITAG_FRAME_LEN) { + // break; + //} rx[rxlen / 8] |= 0 << (7-(rxlen%8)); rxlen++; // We have to skip this half period at start and add the 'one' the second time @@ -1367,6 +1415,11 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { bSkip = !bSkip; } else if(ra >= HITAG_T_TAG_CAPTURE_TWO_HALF) { // Manchester coding example |_-|_-| (00) or |-_|-_| (11) + + //need to test to verify we don't exceed memory... + //if ( ((rxlen+2) / 8) > HITAG_FRAME_LEN) { + // break; + //} if (tag_sof) { // Ignore bits that are transmitted during SOF tag_sof--; @@ -1376,22 +1429,27 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { rxlen++; } } else { + //Dbprintf("DEBUG: Wierd2"); + errorCount++; // Ignore wierd value, is to small to mean anything } } - + //if we saw over 100 wierd values break it probably isn't hitag... + if (errorCount >100) break; // We can break this loop if we received the last bit from a frame if (AT91C_BASE_TC1->TC_CV > T0*HITAG_T_EOF) { if (rxlen>0) break; } } } + //Dbprintf("DEBUG: Done waiting for frame"); + LED_B_OFF(); LED_D_OFF(); AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - Dbprintf("frame received: %d",frame_count); - DbpString("All done"); - cmd_send(CMD_ACK,bSuccessful,0,0,(byte_t*)tag.sectors,48); + //Dbprintf("frame received: %d",frame_count); + //DbpString("All done"); + cmd_send(CMD_ACK,bSuccessful,0,0,(byte_t*)tag.sectors,48); }