X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/bf7ebb7b208a3b95f28a9a40f2e560a56e121794..852ecedc16ee8220c8208828c55d14a668e69c30:/client/cmdhw.c?ds=inline

diff --git a/client/cmdhw.c b/client/cmdhw.c
index 05ad0c9f..b6a0d11f 100644
--- a/client/cmdhw.c
+++ b/client/cmdhw.c
@@ -8,18 +8,20 @@
 // Hardware commands
 //-----------------------------------------------------------------------------
 
+#include "cmdhw.h"
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <limits.h>
 #include "ui.h"
-#include "proxmark3.h"
+#include "comms.h"
 #include "cmdparser.h"
-#include "cmdhw.h"
 #include "cmdmain.h"
 #include "cmddata.h"
 
-/* low-level hardware control */
+
+static uint32_t hw_capabilities = 0;
 
 static int CmdHelp(const char *Cmd);
 
@@ -402,42 +404,69 @@ int CmdTune(const char *Cmd)
     return CmdTuneSamples(Cmd);
 }
 
+bool PM3hasSmartcardSlot(void) {
+	return (hw_capabilities & HAS_SMARTCARD_SLOT);
+}
+
 int CmdVersion(const char *Cmd)
 {
 
+	clearCommandBuffer();
 	UsbCommand c = {CMD_VERSION};
-	static UsbCommand resp = {0, {0, 0, 0}};
-	
-	if (resp.arg[0] == 0 && resp.arg[1] == 0) { // no cached information available
-		SendCommand(&c);
-		if (WaitForResponseTimeout(CMD_ACK,&resp,1000) && Cmd != NULL) {
-			PrintAndLog("Prox/RFID mark3 RFID instrument");
-			PrintAndLog((char*)resp.d.asBytes);
-			lookupChipID(resp.arg[0], resp.arg[1]);
-		}
-	} else if (Cmd != NULL) {
+	UsbCommand resp = {0, {0, 0, 0}};
+
+	SendCommand(&c);
+	if (WaitForResponseTimeout(CMD_ACK, &resp, 1000)) {
 		PrintAndLog("Prox/RFID mark3 RFID instrument");
 		PrintAndLog((char*)resp.d.asBytes);
 		lookupChipID(resp.arg[0], resp.arg[1]);
+		hw_capabilities = resp.arg[2];
+	}
+	return 0;
+}
+
+int CmdStatus(const char *Cmd)
+{
+	clearCommandBuffer();
+	UsbCommand c = {CMD_STATUS};
+	SendCommand(&c);
+	if (!WaitForResponseTimeout(CMD_ACK, &c, 1900)) {
+		PrintAndLog("Status command failed. USB Speed Test timed out");
+	}
+	return 0;
+}
+
+
+int CmdPing(const char *Cmd)
+{
+	clearCommandBuffer();
+	UsbCommand resp;
+	UsbCommand c = {CMD_PING};
+	SendCommand(&c);
+	if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+		PrintAndLog("Ping successful");
+	}else{
+		PrintAndLog("Ping failed");
 	}
-	
 	return 0;
 }
 
 static command_t CommandTable[] = 
 {
-  {"help",          CmdHelp,        1, "This help"},
-  {"detectreader",  CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)"},
-  {"fpgaoff",       CmdFPGAOff,     0, "Set FPGA off"},
-  {"lcd",           CmdLCD,         0, "<HEX command> <count> -- Send command/data to LCD"},
-  {"lcdreset",      CmdLCDReset,    0, "Hardware reset LCD"},
-  {"readmem",       CmdReadmem,     0, "[address] -- Read memory at decimal address from flash"},
-  {"reset",         CmdReset,       0, "Reset the Proxmark3"},
-  {"setlfdivisor",  CmdSetDivisor,  0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
-  {"setmux",        CmdSetMux,      0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
-  {"tune",          CmdTune,        0, "Measure antenna tuning"},
-  {"version",       CmdVersion,     0, "Show version information about the connected Proxmark"},
-  {NULL, NULL, 0, NULL}
+	{"help",          CmdHelp,        1, "This help"},
+	{"detectreader",  CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)"},
+	{"fpgaoff",       CmdFPGAOff,     0, "Set FPGA off"},
+	{"lcd",           CmdLCD,         0, "<HEX command> <count> -- Send command/data to LCD"},
+	{"lcdreset",      CmdLCDReset,    0, "Hardware reset LCD"},
+	{"readmem",       CmdReadmem,     0, "[address] -- Read memory at decimal address from flash"},
+	{"reset",         CmdReset,       0, "Reset the Proxmark3"},
+	{"setlfdivisor",  CmdSetDivisor,  0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
+	{"setmux",        CmdSetMux,      0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
+	{"tune",          CmdTune,        0, "['l'|'h'] -- Measure antenna tuning (option 'l' or 'h' to limit to LF or HF)"},
+	{"version",       CmdVersion,     0, "Show version information about the connected Proxmark"},
+	{"status",        CmdStatus,      0, "Show runtime status information about the connected Proxmark"},
+	{"ping",          CmdPing,        0, "Test if the pm3 is responsive"},
+	{NULL, NULL, 0, NULL}
 };
 
 int CmdHW(const char *Cmd)