X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/db25599d7faa310019d325290b9b93a59dd97c1b..e98572a1e2dde603f31cc06f330c6abd295139de:/armsrc/lfops.c diff --git a/armsrc/lfops.c b/armsrc/lfops.c index b10b0c03..74086d36 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -90,9 +90,9 @@ void ReadTItag(void) // when we read a TI tag we sample the zerocross line at 2Mhz // TI tags modulate a 1 as 16 cycles of 123.2Khz // TI tags modulate a 0 as 16 cycles of 134.2Khz - #define FSAMPLE 2000000 - #define FREQLO 123200 - #define FREQHI 134200 + #define FSAMPLE 2000000 + #define FREQLO 123200 + #define FREQHI 134200 signed char *dest = (signed char *)BigBuf_get_addr(); uint16_t n = BigBuf_max_traceLen(); @@ -402,7 +402,7 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol) for(;;) { //wait until SSC_CLK goes HIGH while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) { - if(BUTTON_PRESS() || usb_poll()) { + if(BUTTON_PRESS() || (usb_poll_validate_length() )) { DbpString("Stopped"); return; } @@ -762,7 +762,7 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); - while(!BUTTON_PRESS()) { + while(!BUTTON_PRESS() && !usb_poll_validate_length()) { WDT_HIT(); if (ledcontrol) LED_A_ON(); @@ -851,7 +851,7 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); - while(!BUTTON_PRESS()) { + while(!BUTTON_PRESS() && !usb_poll_validate_length()) { WDT_HIT(); if (ledcontrol) LED_A_ON(); @@ -942,7 +942,7 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol) // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); - while(!BUTTON_PRESS()) { + while(!BUTTON_PRESS() && !usb_poll_validate_length()) { WDT_HIT(); if (ledcontrol) LED_A_ON(); @@ -1003,7 +1003,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); - while(!BUTTON_PRESS()) { + while(!BUTTON_PRESS() && !usb_poll_validate_length()) { WDT_HIT(); if (ledcontrol) LED_A_ON(); DoAcquisition_default(-1,true); @@ -1080,14 +1080,14 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) */ /* T55x7 configuration register definitions */ -#define T55x7_POR_DELAY 0x00000001 -#define T55x7_ST_TERMINATOR 0x00000008 -#define T55x7_PWD 0x00000010 +#define T55x7_POR_DELAY 0x00000001 +#define T55x7_ST_TERMINATOR 0x00000008 +#define T55x7_PWD 0x00000010 #define T55x7_MAXBLOCK_SHIFT 5 -#define T55x7_AOR 0x00000200 -#define T55x7_PSKCF_RF_2 0 -#define T55x7_PSKCF_RF_4 0x00000400 -#define T55x7_PSKCF_RF_8 0x00000800 +#define T55x7_AOR 0x00000200 +#define T55x7_PSKCF_RF_2 0 +#define T55x7_PSKCF_RF_4 0x00000400 +#define T55x7_PSKCF_RF_8 0x00000800 #define T55x7_MODULATION_DIRECT 0 #define T55x7_MODULATION_PSK1 0x00001000 #define T55x7_MODULATION_PSK2 0x00002000 @@ -1098,17 +1098,18 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) #define T55x7_MODULATION_FSK2a 0x00007000 #define T55x7_MODULATION_MANCHESTER 0x00008000 #define T55x7_MODULATION_BIPHASE 0x00010000 -#define T55x7_BITRATE_RF_8 0 -#define T55x7_BITRATE_RF_16 0x00040000 -#define T55x7_BITRATE_RF_32 0x00080000 -#define T55x7_BITRATE_RF_40 0x000C0000 -#define T55x7_BITRATE_RF_50 0x00100000 -#define T55x7_BITRATE_RF_64 0x00140000 +//#define T55x7_MODULATION_BIPHASE57 0x00011000 +#define T55x7_BITRATE_RF_8 0 +#define T55x7_BITRATE_RF_16 0x00040000 +#define T55x7_BITRATE_RF_32 0x00080000 +#define T55x7_BITRATE_RF_40 0x000C0000 +#define T55x7_BITRATE_RF_50 0x00100000 +#define T55x7_BITRATE_RF_64 0x00140000 #define T55x7_BITRATE_RF_100 0x00180000 #define T55x7_BITRATE_RF_128 0x001C0000 /* T5555 (Q5) configuration register definitions */ -#define T5555_ST_TERMINATOR 0x00000001 +#define T5555_ST_TERMINATOR 0x00000001 #define T5555_MAXBLOCK_SHIFT 0x00000001 #define T5555_MODULATION_MANCHESTER 0 #define T5555_MODULATION_PSK1 0x00000010 @@ -1118,22 +1119,23 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) #define T5555_MODULATION_FSK2 0x00000050 #define T5555_MODULATION_BIPHASE 0x00000060 #define T5555_MODULATION_DIRECT 0x00000070 -#define T5555_INVERT_OUTPUT 0x00000080 -#define T5555_PSK_RF_2 0 -#define T5555_PSK_RF_4 0x00000100 -#define T5555_PSK_RF_8 0x00000200 -#define T5555_USE_PWD 0x00000400 -#define T5555_USE_AOR 0x00000800 -#define T5555_BITRATE_SHIFT 12 -#define T5555_FAST_WRITE 0x00004000 -#define T5555_PAGE_SELECT 0x00008000 +#define T5555_INVERT_OUTPUT 0x00000080 +#define T5555_PSK_RF_2 0 +#define T5555_PSK_RF_4 0x00000100 +#define T5555_PSK_RF_8 0x00000200 +#define T5555_USE_PWD 0x00000400 +#define T5555_USE_AOR 0x00000800 +#define T5555_BITRATE_SHIFT 12 +#define T5555_FAST_WRITE 0x00004000 +#define T5555_PAGE_SELECT 0x00008000 /* * Relevant times in microsecond * To compensate antenna falling times shorten the write times * and enlarge the gap ones. */ -#define START_GAP 31*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (or 15fc) + +#define START_GAP 50*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (or 15fc) #define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (or 10fc) #define WRITE_0 18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc) #define WRITE_1 50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) 432 for T55x7; 448 for E5550 @@ -1157,7 +1159,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) // Write one bit to card void T55xxWriteBit(int bit) { - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + //FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); if (!bit) @@ -1176,7 +1178,7 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod // Set up FPGA, 125kHz // Wait for config.. (192+8190xPOW)x8 == 67ms LFSetupFPGAForADC(0, true); - + // Now start writting FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); SpinDelayUs(START_GAP); @@ -1211,7 +1213,7 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod void TurnReadLFOn(){ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // Give it a bit of time for the resonant antenna to settle. - SpinDelayUs(8*150); + SpinDelayUs(300); } @@ -1229,7 +1231,21 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode) // Set up FPGA, 125kHz // Wait for config.. (192+8190xPOW)x8 == 67ms - LFSetupFPGAForADC(0, true); + //LFSetupFPGAForADC(0, true); + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); + + // Connect the A/D to the peak-detected low-frequency path. + SetAdcMuxFor(GPIO_MUXSEL_LOPKD); + + // Now set up the SSC to get the ADC samples that are now streaming at us. + FpgaSetupSsc(); + + // Give it a bit of time for the resonant antenna to settle. + //SpinDelayUs(8*200); //192FC + SpinDelay(50); + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); SpinDelayUs(START_GAP); @@ -2098,3 +2114,271 @@ void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off LED_D_OFF(); } +void CopyViKingtoT55x7(uint32_t block1,uint32_t block2) +{ + LED_D_ON(); + T55xxWriteBlock(block1,1,0,0); + T55xxWriteBlock(block2,2,0,0); + + T55xxWriteBlock(T55x7_MODULATION_MANCHESTER | T55x7_BITRATE_RF_32 | 2 << T5555_MAXBLOCK_SHIFT,0,0,1); + LED_D_OFF(); + DbpString("DONE!"); +} + + +#define T0_PCF 8 //period for the pcf7931 in us + +/* Write on a byte of a PCF7931 tag + * @param address : address of the block to write + @param byte : address of the byte to write + @param data : data to write + */ +void WritePCF7931(uint8_t pass1, uint8_t pass2, uint8_t pass3, uint8_t pass4, uint8_t pass5, uint8_t pass6, uint8_t pass7, uint16_t init_delay, int32_t l, int32_t p, uint8_t address, uint8_t byte, uint8_t data) +{ + + uint32_t tab[1024]={0}; // data times frame + uint32_t u = 0; + uint8_t parity = 0; + bool comp = 0; + + + //BUILD OF THE DATA FRAME + + //alimentation of the tag (time for initializing) + AddPatternPCF7931(init_delay, 0, 8192/2*T0_PCF, tab); + + //PMC + Dbprintf("Initialization delay : %d us", init_delay); + AddPatternPCF7931(8192/2*T0_PCF + 319*T0_PCF+70, 3*T0_PCF, 29*T0_PCF, tab); + + Dbprintf("Offsets : %d us on the low pulses width, %d us on the low pulses positions", l, p); + + //password indication bit + AddBitPCF7931(1, tab, l, p); + + + //password (on 56 bits) + Dbprintf("Password (LSB first on each byte) : %02x %02x %02x %02x %02x %02x %02x", pass1,pass2,pass3,pass4,pass5,pass6,pass7); + AddBytePCF7931(pass1, tab, l, p); + AddBytePCF7931(pass2, tab, l, p); + AddBytePCF7931(pass3, tab, l, p); + AddBytePCF7931(pass4, tab, l, p); + AddBytePCF7931(pass5, tab, l, p); + AddBytePCF7931(pass6, tab, l, p); + AddBytePCF7931(pass7, tab, l, p); + + + //programming mode (0 or 1) + AddBitPCF7931(0, tab, l, p); + + //block adress on 6 bits + Dbprintf("Block address : %02x", address); + for (u=0; u<6; u++) + { + if (address&(1< 0xFFFF){ + tab[u] -= 0xFFFF; + comp = 0; + } + } + } + + SendCmdPCF7931(tab); +} + + + +/* Send a trame to a PCF7931 tags + * @param tab : array of the data frame + */ + +void SendCmdPCF7931(uint32_t * tab){ + uint16_t u=0; + uint16_t tempo=0; + + Dbprintf("SENDING DATA FRAME..."); + + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz + + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU ); + + LED_A_ON(); + + // steal this pin from the SSP and use it to control the modulation + AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; + AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; + + //initialization of the timer + AT91C_BASE_PMC->PMC_PCER |= (0x1 << 12) | (0x1 << 13) | (0x1 << 14); + AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_TIOA0 | AT91C_TCB_TC2XC2S_NONE; + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; // timer disable + AT91C_BASE_TC0->TC_CMR = AT91C_TC_CLKS_TIMER_DIV3_CLOCK; //clock at 48/32 MHz + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN; + AT91C_BASE_TCB->TCB_BCR = 1; + + + tempo = AT91C_BASE_TC0->TC_CV; + for(u=0;tab[u]!= 0;u+=3){ + + + // modulate antenna + HIGH(GPIO_SSC_DOUT); + while(tempo != tab[u]){ + tempo = AT91C_BASE_TC0->TC_CV; + } + + // stop modulating antenna + LOW(GPIO_SSC_DOUT); + while(tempo != tab[u+1]){ + tempo = AT91C_BASE_TC0->TC_CV; + } + + + // modulate antenna + HIGH(GPIO_SSC_DOUT); + while(tempo != tab[u+2]){ + tempo = AT91C_BASE_TC0->TC_CV; + } + + + } + + LED_A_OFF(); + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + SpinDelay(200); + + + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; // timer disable + DbpString("FINISH !"); + DbpString("(Could be usefull to send the same trame many times)"); + LED(0xFFFF, 1000); +} + + +/* Add a byte for building the data frame of PCF7931 tags + * @param b : byte to add + * @param tab : array of the data frame + * @param l : offset on low pulse width + * @param p : offset on low pulse positioning + */ + +bool AddBytePCF7931(uint8_t byte, uint32_t * tab, int32_t l, int32_t p){ + + uint32_t u; + for (u=0; u<8; u++) + { + if (byte&(1<