X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/e30c654b196a87a13ae7f7d4ced930b296c038ec..e8da77409040fddae64adc6cce1799bb388db121:/armsrc/lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index e4ebacb0..b53f370e 100644
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -1,15 +1,21 @@
 //-----------------------------------------------------------------------------
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
 // Miscellaneous routines for low frequency tag operations.
 // Tags supported here so far are Texas Instruments (TI), HID
 // Also routines for raw mode reading/simulating of LF waveform
-//
 //-----------------------------------------------------------------------------
+
 #include "proxmark3.h"
 #include "apps.h"
+#include "util.h"
 #include "hitag2.h"
 #include "crc16.h"
+#include "string.h"
 
-void AcquireRawAdcSamples125k(BOOL at134khz)
+void AcquireRawAdcSamples125k(int at134khz)
 {
 	if (at134khz)
 		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
@@ -34,7 +40,7 @@ void AcquireRawAdcSamples125k(BOOL at134khz)
 // split into two routines so we can avoid timing issues after sending commands //
 void DoAcquisition125k(void)
 {
-	BYTE *dest = (BYTE *)BigBuf;
+	uint8_t *dest = (uint8_t *)BigBuf;
 	int n = sizeof(BigBuf);
 	int i;
 
@@ -46,7 +52,7 @@ void DoAcquisition125k(void)
 			LED_D_ON();
 		}
 		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
-			dest[i] = (BYTE)AT91C_BASE_SSC->SSC_RHR;
+			dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
 			i++;
 			LED_D_OFF();
 			if (i >= n) break;
@@ -56,9 +62,9 @@ void DoAcquisition125k(void)
 			dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]);
 }
 
-void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, BYTE *command)
+void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command)
 {
-	BOOL at134khz;
+	int at134khz;
 
 	/* Make sure the tag is reset */
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
@@ -141,13 +147,13 @@ void ReadTItag(void)
 //	int n = GraphTraceLen;
 
 	// 128 bit shift register [shift3:shift2:shift1:shift0]
-	DWORD shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0;
+	uint32_t shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0;
 
 	int i, cycles=0, samples=0;
 	// how many sample points fit in 16 cycles of each frequency
-	DWORD sampleslo = (FSAMPLE<<4)/FREQLO, sampleshi = (FSAMPLE<<4)/FREQHI;
+	uint32_t sampleslo = (FSAMPLE<<4)/FREQLO, sampleshi = (FSAMPLE<<4)/FREQHI;
 	// when to tell if we're close enough to one freq or another
-	DWORD threshold = (sampleslo - sampleshi + 1)>>1;
+	uint32_t threshold = (sampleslo - sampleshi + 1)>>1;
 
 	// TI tags charge at 134.2Khz
 	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
@@ -236,7 +242,7 @@ void ReadTItag(void)
 		// i'm 99% sure the crc algorithm is correct, but it may need to eat the
 		// bytes in reverse or something
 		// calculate CRC
-		DWORD crc=0;
+		uint32_t crc=0;
 
 	 	crc = update_crc16(crc, (shift0)&0xff);
 		crc = update_crc16(crc, (shift0>>8)&0xff);
@@ -257,7 +263,7 @@ void ReadTItag(void)
 	}
 }
 
-void WriteTIbyte(BYTE b)
+void WriteTIbyte(uint8_t b)
 {
 	int i = 0;
 
@@ -286,7 +292,7 @@ void AcquireTiType(void)
 {
 	int i, j, n;
 	// tag transmission is <20ms, sampling at 2M gives us 40K samples max
-	// each sample is 1 bit stuffed into a DWORD so we need 1250 DWORDS
+	// each sample is 1 bit stuffed into a uint32_t so we need 1250 uint32_t
 	#define TIBUFLEN 1250
 
 	// clear buffer
@@ -355,7 +361,7 @@ void AcquireTiType(void)
 // arguments: 64bit data split into 32bit idhi:idlo and optional 16bit crc
 // if crc provided, it will be written with the data verbatim (even if bogus)
 // if not provided a valid crc will be computed from the data and written.
-void WriteTItag(DWORD idhi, DWORD idlo, WORD crc)
+void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
 {
 	if(crc == 0) {
 	 	crc = update_crc16(crc, (idlo)&0xff);
@@ -426,7 +432,7 @@ void WriteTItag(DWORD idhi, DWORD idlo, WORD crc)
 void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 {
 	int i;
-	BYTE *tab = (BYTE *)BigBuf;
+	uint8_t *tab = (uint8_t *)BigBuf;
 
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_SIMULATOR);
 
@@ -537,7 +543,7 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0)
 	AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
 	AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME;
 	AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
-	AT91C_BASE_TC1->TC_CMR =	TC_CMR_TCCLKS_TIMER_CLOCK1 |
+	AT91C_BASE_TC1->TC_CMR =	AT91C_TC_CLKS_TIMER_DIV1_CLOCK |
 								AT91C_TC_ETRGEDG_RISING |
 								AT91C_TC_ABETRG |
 								AT91C_TC_LDRA_RISING |
@@ -673,7 +679,7 @@ static void hitag_handle_frame(int t0, int frame_len, char *frame)
 
 // compose fc/8 fc/10 waveform
 static void fc(int c, int *n) {
-	BYTE *dest = (BYTE *)BigBuf;
+	uint8_t *dest = (uint8_t *)BigBuf;
 	int idx;
 
 	// for when we want an fc8 pattern every 4 logical bits
@@ -778,9 +784,9 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
 // loop to capture raw HID waveform then FSK demodulate the TAG ID from it
 void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 {
-	BYTE *dest = (BYTE *)BigBuf;
+	uint8_t *dest = (uint8_t *)BigBuf;
 	int m=0, n=0, i=0, idx=0, found=0, lastval=0;
-	DWORD hi=0, lo=0;
+	uint32_t hi=0, lo=0;
 
 	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
@@ -815,7 +821,7 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 					LED_D_ON();
 			}
 			if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
-				dest[i] = (BYTE)AT91C_BASE_SSC->SSC_RHR;
+				dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
 				// we don't care about actual value, only if it's more or less than a
 				// threshold essentially we capture zero crossings for later analysis
 				if(dest[i] < 127) dest[i] = 0; else dest[i] = 1;
@@ -969,3 +975,256 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 		WDT_HIT();
 	}
 }
+
+/*------------------------------
+ * T5555/T5557/T5567 routines
+ *------------------------------
+ */
+
+/* T55x7 configuration register definitions */
+#define T55x7_POR_DELAY			0x00000001
+#define T55x7_ST_TERMINATOR		0x00000008
+#define T55x7_PWD			0x00000010
+#define T55x7_MAXBLOCK_SHIFT		5
+#define T55x7_AOR			0x00000200
+#define T55x7_PSKCF_RF_2		0
+#define T55x7_PSKCF_RF_4		0x00000400
+#define T55x7_PSKCF_RF_8		0x00000800
+#define T55x7_MODULATION_DIRECT		0
+#define T55x7_MODULATION_PSK1		0x00001000
+#define T55x7_MODULATION_PSK2		0x00002000
+#define T55x7_MODULATION_PSK3		0x00003000
+#define T55x7_MODULATION_FSK1		0x00004000
+#define T55x7_MODULATION_FSK2		0x00005000
+#define T55x7_MODULATION_FSK1a		0x00006000
+#define T55x7_MODULATION_FSK2a		0x00007000
+#define T55x7_MODULATION_MANCHESTER	0x00008000
+#define T55x7_MODULATION_BIPHASE	0x00010000
+#define T55x7_BITRATE_RF_8		0
+#define T55x7_BITRATE_RF_16		0x00040000
+#define T55x7_BITRATE_RF_32		0x00080000
+#define T55x7_BITRATE_RF_40		0x000C0000
+#define T55x7_BITRATE_RF_50		0x00100000
+#define T55x7_BITRATE_RF_64		0x00140000
+#define T55x7_BITRATE_RF_100		0x00180000
+#define T55x7_BITRATE_RF_128		0x001C0000
+
+/* T5555 (Q5) configuration register definitions */
+#define T5555_ST_TERMINATOR		0x00000001
+#define T5555_MAXBLOCK_SHIFT		0x00000001
+#define T5555_MODULATION_MANCHESTER	0
+#define T5555_MODULATION_PSK1		0x00000010
+#define T5555_MODULATION_PSK2		0x00000020
+#define T5555_MODULATION_PSK3		0x00000030
+#define T5555_MODULATION_FSK1		0x00000040
+#define T5555_MODULATION_FSK2		0x00000050
+#define T5555_MODULATION_BIPHASE	0x00000060
+#define T5555_MODULATION_DIRECT		0x00000070
+#define T5555_INVERT_OUTPUT		0x00000080
+#define T5555_PSK_RF_2			0
+#define T5555_PSK_RF_4			0x00000100
+#define T5555_PSK_RF_8			0x00000200
+#define T5555_USE_PWD			0x00000400
+#define T5555_USE_AOR			0x00000800
+#define T5555_BITRATE_SHIFT		12
+#define T5555_FAST_WRITE		0x00004000
+#define T5555_PAGE_SELECT		0x00008000
+
+/*
+ * Relevant times in microsecond
+ * To compensate antenna falling times shorten the write times
+ * and enlarge the gap ones.
+ */
+#define START_GAP 250
+#define WRITE_GAP 160
+#define WRITE_0   144 // 192
+#define WRITE_1   400 // 432 for T55x7; 448 for E5550
+
+// Write one bit to card
+void T55xxWriteBit(int bit)
+{
+	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+	if (bit == 0)
+		SpinDelayUs(WRITE_0);
+	else
+		SpinDelayUs(WRITE_1);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+	SpinDelayUs(WRITE_GAP);
+}
+
+// Write one card block in page 0, no lock
+void T55xxWriteBlock(int Data, int Block)
+{
+	unsigned int i;
+
+	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+
+	// Give it a bit of time for the resonant antenna to settle.
+	// And for the tag to fully power up
+	SpinDelay(150);
+
+	// Now start writting
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+	SpinDelayUs(START_GAP);
+
+	// Opcode
+	T55xxWriteBit(1);
+	T55xxWriteBit(0); //Page 0
+	// Lock bit
+	T55xxWriteBit(0);
+
+	// Data
+	for (i = 0x80000000; i != 0; i >>= 1)
+		T55xxWriteBit(Data & i);
+
+	// Page
+	for (i = 0x04; i != 0; i >>= 1)
+		T55xxWriteBit(Block & i);
+
+	// Now perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
+	// so wait a little more)
+	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+	SpinDelay(20);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+}
+
+// Copy HID id to card and setup block 0 config
+void CopyHIDtoT5567(int hi, int lo)
+{
+	int data1, data2, data3;
+
+	// Ensure no more than 44 bits supplied
+	if (hi>0xFFF) {
+		DbpString("Tags can only have 44 bits.");
+		return;
+	}
+
+	// Build the 3 data blocks for supplied 44bit ID
+	data1 = 0x1D000000; // load preamble
+
+	for (int i=0;i<12;i++) {
+		if (hi & (1<<(11-i)))
+			data1 |= (1<<(((11-i)*2)+1)); // 1 -> 10
+		else
+			data1 |= (1<<((11-i)*2)); // 0 -> 01
+	}
+
+	data2 = 0;
+	for (int i=0;i<16;i++) {
+		if (lo & (1<<(31-i)))
+			data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+		else
+			data2 |= (1<<((15-i)*2)); // 0 -> 01
+	}
+
+	data3 = 0;
+	for (int i=0;i<16;i++) {
+		if (lo & (1<<(15-i)))
+			data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+		else
+			data3 |= (1<<((15-i)*2)); // 0 -> 01
+	}
+
+	// Program the 3 data blocks for supplied 44bit ID
+	// and the block 0 for HID format
+	T55xxWriteBlock(data1,1);
+	T55xxWriteBlock(data2,2);
+	T55xxWriteBlock(data3,3);
+
+	// Config for HID (RF/50, FSK2a, Maxblock=3)
+	T55xxWriteBlock(T55x7_BITRATE_RF_50	    |
+			T55x7_MODULATION_MANCHESTER |
+			3 << T55x7_MAXBLOCK_SHIFT,
+			0);
+
+	DbpString("DONE!");
+}
+
+// Define 9bit header for EM410x tags
+#define EM410X_HEADER		0x1FF
+#define EM410X_ID_LENGTH	40
+
+void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo)
+{
+	int i, id_bit;
+	uint64_t id = EM410X_HEADER;
+	uint64_t rev_id = 0;	// reversed ID
+	int c_parity[4];	// column parity
+	int r_parity = 0;	// row parity
+
+	// Reverse ID bits given as parameter (for simpler operations)
+	for (i = 0; i < EM410X_ID_LENGTH; ++i) {
+		if (i < 32) {
+			rev_id = (rev_id << 1) | (id_lo & 1);
+			id_lo >>= 1;
+		} else {
+			rev_id = (rev_id << 1) | (id_hi & 1);
+			id_hi >>= 1;
+		}
+	}
+
+	for (i = 0; i < EM410X_ID_LENGTH; ++i) {
+		id_bit = rev_id & 1;
+
+		if (i % 4 == 0) {
+			// Don't write row parity bit at start of parsing
+			if (i)
+				id = (id << 1) | r_parity;
+			// Start counting parity for new row
+			r_parity = id_bit;
+		} else {
+			// Count row parity
+			r_parity ^= id_bit;
+		}
+
+		// First elements in column?
+		if (i < 4)
+			// Fill out first elements
+			c_parity[i] = id_bit;
+		else
+			// Count column parity
+			c_parity[i % 4] ^= id_bit;
+
+		// Insert ID bit
+		id = (id << 1) | id_bit;
+		rev_id >>= 1;
+	}
+
+	// Insert parity bit of last row
+	id = (id << 1) | r_parity;
+
+	// Fill out column parity at the end of tag
+	for (i = 0; i < 4; ++i)
+		id = (id << 1) | c_parity[i];
+
+	// Add stop bit
+	id <<= 1;
+
+	Dbprintf("Started writing %s tag ...", card ? "T55x7":"T5555");
+	LED_D_ON();
+
+	// Write EM410x ID
+	T55xxWriteBlock((uint32_t)(id >> 32), 1);
+	T55xxWriteBlock((uint32_t)id, 2);
+
+	// Config for EM410x (RF/64, Manchester, Maxblock=2)
+	if (card)
+		// Writing configuration for T55x7 tag
+		T55xxWriteBlock(T55x7_BITRATE_RF_64	    |
+				T55x7_MODULATION_MANCHESTER |
+				2 << T55x7_MAXBLOCK_SHIFT,
+				0);
+	else
+		// Writing configuration for T5555(Q5) tag
+		T55xxWriteBlock(0x1F << T5555_BITRATE_SHIFT |
+				T5555_MODULATION_MANCHESTER   |
+				2 << T5555_MAXBLOCK_SHIFT,
+				0);
+
+	LED_D_OFF();
+	Dbprintf("Tag %s written with 0x%08x%08x\n", card ? "T55x7":"T5555",
+					(uint32_t)(id >> 32), (uint32_t)id);
+}