X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/f89c705002842291e39d000f27dbaea1ddd78917..00baf27097ca945936d52afde1f8da831decbe59:/armsrc/iso14443a.c diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c index 7b709ab0..f86b816f 100644 --- a/armsrc/iso14443a.c +++ b/armsrc/iso14443a.c @@ -1,5 +1,5 @@ -//----------------------------------------------------------------------------- -// Merlok - June 2011 + //----------------------------------------------------------------------------- +// Merlok - June 2011, 2012 // Gerhard de Koning Gans - May 2008 // Hagen Fritsch - June 2010 // @@ -9,28 +9,99 @@ //----------------------------------------------------------------------------- // Routines to support ISO 14443 type A. //----------------------------------------------------------------------------- - -#include "proxmark3.h" -#include "apps.h" -#include "util.h" -#include "string.h" - -#include "iso14443crc.h" #include "iso14443a.h" -#include "crapto1.h" -#include "mifareutil.h" -static uint8_t *trace = (uint8_t *) BigBuf; -static int traceLen = 0; -static int rsamples = 0; -static int tracing = TRUE; static uint32_t iso14a_timeout; +int rsamples = 0; +uint8_t trigger = 0; +// the block number for the ISO14443-4 PCB +static uint8_t iso14_pcb_blocknum = 0; + +static uint8_t* free_buffer_pointer; + +// +// ISO14443 timing: +// +// minimum time between the start bits of consecutive transfers from reader to tag: 7000 carrier (13.56Mhz) cycles +#define REQUEST_GUARD_TIME (7000/16 + 1) +// minimum time between last modulation of tag and next start bit from reader to tag: 1172 carrier cycles +#define FRAME_DELAY_TIME_PICC_TO_PCD (1172/16 + 1) +// bool LastCommandWasRequest = FALSE; -// CARD TO READER +// +// Total delays including SSC-Transfers between ARM and FPGA. These are in carrier clock cycles (1/13,56MHz) +// +// When the PM acts as reader and is receiving tag data, it takes +// 3 ticks delay in the AD converter +// 16 ticks until the modulation detector completes and sets curbit +// 8 ticks until bit_to_arm is assigned from curbit +// 8*16 ticks for the transfer from FPGA to ARM +// 4*16 ticks until we measure the time +// - 8*16 ticks because we measure the time of the previous transfer +#define DELAY_AIR2ARM_AS_READER (3 + 16 + 8 + 8*16 + 4*16 - 8*16) + +// When the PM acts as a reader and is sending, it takes +// 4*16 ticks until we can write data to the sending hold register +// 8*16 ticks until the SHR is transferred to the Sending Shift Register +// 8 ticks until the first transfer starts +// 8 ticks later the FPGA samples the data +// 1 tick to assign mod_sig_coil +#define DELAY_ARM2AIR_AS_READER (4*16 + 8*16 + 8 + 8 + 1) + +// When the PM acts as tag and is receiving it takes +// 2 ticks delay in the RF part (for the first falling edge), +// 3 ticks for the A/D conversion, +// 8 ticks on average until the start of the SSC transfer, +// 8 ticks until the SSC samples the first data +// 7*16 ticks to complete the transfer from FPGA to ARM +// 8 ticks until the next ssp_clk rising edge +// 4*16 ticks until we measure the time +// - 8*16 ticks because we measure the time of the previous transfer +#define DELAY_AIR2ARM_AS_TAG (2 + 3 + 8 + 8 + 7*16 + 8 + 4*16 - 8*16) + +// The FPGA will report its internal sending delay in +uint16_t FpgaSendQueueDelay; +// the 5 first bits are the number of bits buffered in mod_sig_buf +// the last three bits are the remaining ticks/2 after the mod_sig_buf shift +#define DELAY_FPGA_QUEUE (FpgaSendQueueDelay<<1) + +// When the PM acts as tag and is sending, it takes +// 4*16 ticks until we can write data to the sending hold register +// 8*16 ticks until the SHR is transferred to the Sending Shift Register +// 8 ticks until the first transfer starts +// 8 ticks later the FPGA samples the data +// + a varying number of ticks in the FPGA Delay Queue (mod_sig_buf) +// + 1 tick to assign mod_sig_coil +#define DELAY_ARM2AIR_AS_TAG (4*16 + 8*16 + 8 + 8 + DELAY_FPGA_QUEUE + 1) + +// When the PM acts as sniffer and is receiving tag data, it takes +// 3 ticks A/D conversion +// 14 ticks to complete the modulation detection +// 8 ticks (on average) until the result is stored in to_arm +// + the delays in transferring data - which is the same for +// sniffing reader and tag data and therefore not relevant +#define DELAY_TAG_AIR2ARM_AS_SNIFFER (3 + 14 + 8) + +// When the PM acts as sniffer and is receiving reader data, it takes +// 2 ticks delay in analogue RF receiver (for the falling edge of the +// start bit, which marks the start of the communication) +// 3 ticks A/D conversion +// 8 ticks on average until the data is stored in to_arm. +// + the delays in transferring data - which is the same for +// sniffing reader and tag data and therefore not relevant +#define DELAY_READER_AIR2ARM_AS_SNIFFER (2 + 3 + 8) + +//variables used for timing purposes: +//these are in ssp_clk cycles: +static uint32_t NextTransferTime; +static uint32_t LastTimeProxToAirStart; +static uint32_t LastProxToAirDuration; + +// CARD TO READER - manchester // Sequence D: 11110000 modulation with subcarrier during first half // Sequence E: 00001111 modulation with subcarrier during second half // Sequence F: 00000000 no modulation with subcarrier -// READER TO CARD +// READER TO CARD - miller // Sequence X: 00001100 drop after half a period // Sequence Y: 00000000 no drop // Sequence Z: 11000000 drop at start @@ -41,569 +112,381 @@ static uint32_t iso14a_timeout; #define SEC_Y 0x00 #define SEC_Z 0xc0 -static const uint8_t OddByteParity[256] = { - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, - 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1 -}; +void iso14a_set_trigger(bool enable) { + trigger = enable; +} -// BIG CHANGE - UNDERSTAND THIS BEFORE WE COMMIT -#define RECV_CMD_OFFSET 3032 -#define RECV_RES_OFFSET 3096 -#define DMA_BUFFER_OFFSET 3160 -#define DMA_BUFFER_SIZE 4096 -#define TRACE_LENGTH 3000 +void iso14a_set_timeout(uint32_t timeout) { + iso14a_timeout = timeout; + if(MF_DBGLEVEL >= 3) Dbprintf("ISO14443A Timeout set to %ld (%dms)", iso14a_timeout, iso14a_timeout / 106); +} -uint8_t trigger = 0; -void iso14a_set_trigger(int enable) { - trigger = enable; +void iso14a_set_ATS_timeout(uint8_t *ats) { + uint8_t tb1; + uint8_t fwi; + uint32_t fwt; + + if (ats[0] > 1) { // there is a format byte T0 + if ((ats[1] & 0x20) == 0x20) { // there is an interface byte TB(1) + + if ((ats[1] & 0x10) == 0x10) // there is an interface byte TA(1) preceding TB(1) + tb1 = ats[3]; + else + tb1 = ats[2]; + + fwi = (tb1 & 0xf0) >> 4; // frame waiting indicator (FWI) + fwt = 256 * 16 * (1 << fwi); // frame waiting time (FWT) in 1/fc + //fwt = 4096 * (1 << fwi); + + iso14a_set_timeout(fwt/(8*16)); + //iso14a_set_timeout(fwt/128); + } + } } //----------------------------------------------------------------------------- // Generate the parity value for a byte sequence // //----------------------------------------------------------------------------- -byte_t oddparity (const byte_t bt) -{ - return OddByteParity[bt]; -} - -uint32_t GetParity(const uint8_t * pbtCmd, int iLen) -{ - int i; - uint32_t dwPar = 0; - - // Generate the encrypted data - for (i = 0; i < iLen; i++) { - // Save the encrypted parity bit - dwPar |= ((OddByteParity[pbtCmd[i]]) << i); - } - return dwPar; -} +void GetParity(const uint8_t *pbtCmd, uint16_t iLen, uint8_t *par) { + uint16_t paritybit_cnt = 0; + uint16_t paritybyte_cnt = 0; + uint8_t parityBits = 0; + + for (uint16_t i = 0; i < iLen; i++) { + // Generate the parity bits + parityBits |= ((oddparity8(pbtCmd[i])) << (7-paritybit_cnt)); + if (paritybit_cnt == 7) { + par[paritybyte_cnt] = parityBits; // save 8 Bits parity + parityBits = 0; // and advance to next Parity Byte + paritybyte_cnt++; + paritybit_cnt = 0; + } else { + paritybit_cnt++; + } + } -void AppendCrc14443a(uint8_t* data, int len) -{ - ComputeCrc14443(CRC_14443_A,data,len,data+len,data+len+1); + // save remaining parity bits + par[paritybyte_cnt] = parityBits; } -int LogTrace(const uint8_t * btBytes, int iLen, int iSamples, uint32_t dwParity, int bReader) -{ - // Return when trace is full - if (traceLen >= TRACE_LENGTH) return FALSE; - - // Trace the random, i'm curious - rsamples += iSamples; - trace[traceLen++] = ((rsamples >> 0) & 0xff); - trace[traceLen++] = ((rsamples >> 8) & 0xff); - trace[traceLen++] = ((rsamples >> 16) & 0xff); - trace[traceLen++] = ((rsamples >> 24) & 0xff); - if (!bReader) { - trace[traceLen - 1] |= 0x80; - } - trace[traceLen++] = ((dwParity >> 0) & 0xff); - trace[traceLen++] = ((dwParity >> 8) & 0xff); - trace[traceLen++] = ((dwParity >> 16) & 0xff); - trace[traceLen++] = ((dwParity >> 24) & 0xff); - trace[traceLen++] = iLen; - memcpy(trace + traceLen, btBytes, iLen); - traceLen += iLen; - return TRUE; +void AppendCrc14443a(uint8_t* data, int len) { + ComputeCrc14443(CRC_14443_A,data,len,data+len,data+len+1); } +//============================================================================= +// ISO 14443 Type A - Miller decoder +//============================================================================= +// Basics: +// This decoder is used when the PM3 acts as a tag. +// The reader will generate "pauses" by temporarily switching of the field. +// At the PM3 antenna we will therefore measure a modulated antenna voltage. +// The FPGA does a comparison with a threshold and would deliver e.g.: +// ........ 1 1 1 1 1 1 0 0 1 1 1 1 1 1 1 1 1 1 0 0 1 1 1 1 1 1 1 1 1 1 ....... +// The Miller decoder needs to identify the following sequences: +// 2 (or 3) ticks pause followed by 6 (or 5) ticks unmodulated: pause at beginning - Sequence Z ("start of communication" or a "0") +// 8 ticks without a modulation: no pause - Sequence Y (a "0" or "end of communication" or "no information") +// 4 ticks unmodulated followed by 2 (or 3) ticks pause: pause in second half - Sequence X (a "1") +// Note 1: the bitstream may start at any time. We therefore need to sync. +// Note 2: the interpretation of Sequence Y and Z depends on the preceding sequence. //----------------------------------------------------------------------------- -// The software UART that receives commands from the reader, and its state -// variables. -//----------------------------------------------------------------------------- -static struct { - enum { - STATE_UNSYNCD, - STATE_START_OF_COMMUNICATION, - STATE_MILLER_X, - STATE_MILLER_Y, - STATE_MILLER_Z, - STATE_ERROR_WAIT - } state; - uint16_t shiftReg; - int bitCnt; - int byteCnt; - int byteCntMax; - int posCnt; - int syncBit; - int parityBits; - int samples; - int highCnt; - int bitBuffer; - enum { - DROP_NONE, - DROP_FIRST_HALF, - DROP_SECOND_HALF - } drop; - uint8_t *output; -} Uart; - -static RAMFUNC int MillerDecoding(int bit) -{ - int error = 0; - int bitright; - - if(!Uart.bitBuffer) { - Uart.bitBuffer = bit ^ 0xFF0; - return FALSE; - } - else { - Uart.bitBuffer <<= 4; - Uart.bitBuffer ^= bit; - } - - int EOC = FALSE; - - if(Uart.state != STATE_UNSYNCD) { - Uart.posCnt++; +static tUart Uart; + +// Lookup-Table to decide if 4 raw bits are a modulation. +// We accept the following: +// 0001 - a 3 tick wide pause +// 0011 - a 2 tick wide pause, or a three tick wide pause shifted left +// 0111 - a 2 tick wide pause shifted left +// 1001 - a 2 tick wide pause shifted right +const bool Mod_Miller_LUT[] = { + FALSE, TRUE, FALSE, TRUE, FALSE, FALSE, FALSE, TRUE, + FALSE, TRUE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE +}; +#define IsMillerModulationNibble1(b) (Mod_Miller_LUT[(b & 0x000000F0) >> 4]) +#define IsMillerModulationNibble2(b) (Mod_Miller_LUT[(b & 0x0000000F)]) + +void UartReset() { + Uart.state = STATE_UNSYNCD; + Uart.bitCount = 0; + Uart.len = 0; // number of decoded data bytes + Uart.parityLen = 0; // number of decoded parity bytes + Uart.shiftReg = 0; // shiftreg to hold decoded data bits + Uart.parityBits = 0; // holds 8 parity bits + Uart.startTime = 0; + Uart.endTime = 0; + + Uart.byteCntMax = 0; + Uart.posCnt = 0; + Uart.syncBit = 9999; +} - if((Uart.bitBuffer & Uart.syncBit) ^ Uart.syncBit) { - bit = 0x00; - } - else { - bit = 0x01; - } - if(((Uart.bitBuffer << 1) & Uart.syncBit) ^ Uart.syncBit) { - bitright = 0x00; - } - else { - bitright = 0x01; - } - if(bit != bitright) { bit = bitright; } +void UartInit(uint8_t *data, uint8_t *parity) { + Uart.output = data; + Uart.parity = parity; + Uart.fourBits = 0x00000000; // clear the buffer for 4 Bits + UartReset(); +} - if(Uart.posCnt == 1) { - // measurement first half bitperiod - if(!bit) { - Uart.drop = DROP_FIRST_HALF; - } +// use parameter non_real_time to provide a timestamp. Set to 0 if the decoder should measure real time +static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time) { + Uart.fourBits = (Uart.fourBits << 8) | bit; + + if (Uart.state == STATE_UNSYNCD) { // not yet synced + Uart.syncBit = 9999; // not set + + // 00x11111 2|3 ticks pause followed by 6|5 ticks unmodulated Sequence Z (a "0" or "start of communication") + // 11111111 8 ticks unmodulation Sequence Y (a "0" or "end of communication" or "no information") + // 111100x1 4 ticks unmodulated followed by 2|3 ticks pause Sequence X (a "1") + + // The start bit is one ore more Sequence Y followed by a Sequence Z (... 11111111 00x11111). We need to distinguish from + // Sequence X followed by Sequence Y followed by Sequence Z (111100x1 11111111 00x11111) + // we therefore look for a ...xx1111 11111111 00x11111xxxxxx... pattern + // (12 '1's followed by 2 '0's, eventually followed by another '0', followed by 5 '1's) + // +#define ISO14443A_STARTBIT_MASK 0x07FFEF80 // mask is 00001111 11111111 1110 1111 10000000 +#define ISO14443A_STARTBIT_PATTERN 0x07FF8F80 // pattern is 00001111 11111111 1000 1111 10000000 + + if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 0)) == ISO14443A_STARTBIT_PATTERN >> 0) Uart.syncBit = 7; + else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 1)) == ISO14443A_STARTBIT_PATTERN >> 1) Uart.syncBit = 6; + else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 2)) == ISO14443A_STARTBIT_PATTERN >> 2) Uart.syncBit = 5; + else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 3)) == ISO14443A_STARTBIT_PATTERN >> 3) Uart.syncBit = 4; + else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 4)) == ISO14443A_STARTBIT_PATTERN >> 4) Uart.syncBit = 3; + else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 5)) == ISO14443A_STARTBIT_PATTERN >> 5) Uart.syncBit = 2; + else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 6)) == ISO14443A_STARTBIT_PATTERN >> 6) Uart.syncBit = 1; + else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 7)) == ISO14443A_STARTBIT_PATTERN >> 7) Uart.syncBit = 0; + + if (Uart.syncBit != 9999) { // found a sync bit + Uart.startTime = non_real_time ? non_real_time : (GetCountSspClk() & 0xfffffff8); + Uart.startTime -= Uart.syncBit; + Uart.endTime = Uart.startTime; + Uart.state = STATE_START_OF_COMMUNICATION; } - else { - // measurement second half bitperiod - if(!bit & (Uart.drop == DROP_NONE)) { - Uart.drop = DROP_SECOND_HALF; - } - else if(!bit) { - // measured a drop in first and second half - // which should not be possible - Uart.state = STATE_ERROR_WAIT; - error = 0x01; + } else { + + if (IsMillerModulationNibble1(Uart.fourBits >> Uart.syncBit)) { + if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation in both halves - error + UartReset(); + } else { // Modulation in first half = Sequence Z = logic "0" + if (Uart.state == STATE_MILLER_X) { // error - must not follow after X + UartReset(); + } else { + Uart.bitCount++; + Uart.shiftReg = (Uart.shiftReg >> 1); // add a 0 to the shiftreg + Uart.state = STATE_MILLER_Z; + Uart.endTime = Uart.startTime + 8*(9*Uart.len + Uart.bitCount + 1) - 6; + if(Uart.bitCount >= 9) { // if we decoded a full byte (including parity) + Uart.output[Uart.len++] = (Uart.shiftReg & 0xff); + Uart.parityBits <<= 1; // make room for the parity bit + Uart.parityBits |= ((Uart.shiftReg >> 8) & 0x01); // store parity bit + Uart.bitCount = 0; + Uart.shiftReg = 0; + if((Uart.len&0x0007) == 0) { // every 8 data bytes + Uart.parity[Uart.parityLen++] = Uart.parityBits; // store 8 parity bits + Uart.parityBits = 0; + } + } + } } - - Uart.posCnt = 0; - - switch(Uart.state) { - case STATE_START_OF_COMMUNICATION: + } else { + if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation second half = Sequence X = logic "1" + Uart.bitCount++; + Uart.shiftReg = (Uart.shiftReg >> 1) | 0x100; // add a 1 to the shiftreg + Uart.state = STATE_MILLER_X; + Uart.endTime = Uart.startTime + 8*(9*Uart.len + Uart.bitCount + 1) - 2; + if(Uart.bitCount >= 9) { // if we decoded a full byte (including parity) + Uart.output[Uart.len++] = (Uart.shiftReg & 0xff); + Uart.parityBits <<= 1; // make room for the new parity bit + Uart.parityBits |= ((Uart.shiftReg >> 8) & 0x01); // store parity bit + Uart.bitCount = 0; Uart.shiftReg = 0; - if(Uart.drop == DROP_SECOND_HALF) { - // error, should not happen in SOC - Uart.state = STATE_ERROR_WAIT; - error = 0x02; - } - else { - // correct SOC - Uart.state = STATE_MILLER_Z; - } - break; - - case STATE_MILLER_Z: - Uart.bitCnt++; - Uart.shiftReg >>= 1; - if(Uart.drop == DROP_NONE) { - // logic '0' followed by sequence Y - // end of communication - Uart.state = STATE_UNSYNCD; - EOC = TRUE; + if ((Uart.len&0x0007) == 0) { // every 8 data bytes + Uart.parity[Uart.parityLen++] = Uart.parityBits; // store 8 parity bits + Uart.parityBits = 0; } - // if(Uart.drop == DROP_FIRST_HALF) { - // Uart.state = STATE_MILLER_Z; stay the same - // we see a logic '0' } - if(Uart.drop == DROP_SECOND_HALF) { - // we see a logic '1' - Uart.shiftReg |= 0x100; - Uart.state = STATE_MILLER_X; - } - break; - - case STATE_MILLER_X: - Uart.shiftReg >>= 1; - if(Uart.drop == DROP_NONE) { - // sequence Y, we see a '0' - Uart.state = STATE_MILLER_Y; - Uart.bitCnt++; - } - if(Uart.drop == DROP_FIRST_HALF) { - // Would be STATE_MILLER_Z - // but Z does not follow X, so error - Uart.state = STATE_ERROR_WAIT; - error = 0x03; - } - if(Uart.drop == DROP_SECOND_HALF) { - // We see a '1' and stay in state X - Uart.shiftReg |= 0x100; - Uart.bitCnt++; - } - break; - - case STATE_MILLER_Y: - Uart.bitCnt++; - Uart.shiftReg >>= 1; - if(Uart.drop == DROP_NONE) { - // logic '0' followed by sequence Y - // end of communication - Uart.state = STATE_UNSYNCD; - EOC = TRUE; - } - if(Uart.drop == DROP_FIRST_HALF) { - // we see a '0' - Uart.state = STATE_MILLER_Z; - } - if(Uart.drop == DROP_SECOND_HALF) { - // We see a '1' and go to state X - Uart.shiftReg |= 0x100; - Uart.state = STATE_MILLER_X; + } + } else { // no modulation in both halves - Sequence Y + if (Uart.state == STATE_MILLER_Z || Uart.state == STATE_MILLER_Y) { // Y after logic "0" - End of Communication + Uart.state = STATE_UNSYNCD; + Uart.bitCount--; // last "0" was part of EOC sequence + Uart.shiftReg <<= 1; // drop it + if(Uart.bitCount > 0) { // if we decoded some bits + Uart.shiftReg >>= (9 - Uart.bitCount); // right align them + Uart.output[Uart.len++] = (Uart.shiftReg & 0xff); // add last byte to the output + Uart.parityBits <<= 1; // add a (void) parity bit + Uart.parityBits <<= (8 - (Uart.len&0x0007)); // left align parity bits + Uart.parity[Uart.parityLen++] = Uart.parityBits; // and store it + return TRUE; + } else if (Uart.len & 0x0007) { // there are some parity bits to store + Uart.parityBits <<= (8 - (Uart.len&0x0007)); // left align remaining parity bits + Uart.parity[Uart.parityLen++] = Uart.parityBits; // and store them } - break; - - case STATE_ERROR_WAIT: - // That went wrong. Now wait for at least two bit periods - // and try to sync again - if(Uart.drop == DROP_NONE) { - Uart.highCnt = 6; - Uart.state = STATE_UNSYNCD; + if (Uart.len) { + return TRUE; // we are finished with decoding the raw data sequence + } else { + UartReset(); // Nothing received - start over } - break; - - default: - Uart.state = STATE_UNSYNCD; - Uart.highCnt = 0; - break; - } - - Uart.drop = DROP_NONE; - - // should have received at least one whole byte... - if((Uart.bitCnt == 2) && EOC && (Uart.byteCnt > 0)) { - return TRUE; - } - - if(Uart.bitCnt == 9) { - Uart.output[Uart.byteCnt] = (Uart.shiftReg & 0xff); - Uart.byteCnt++; - - Uart.parityBits <<= 1; - Uart.parityBits ^= ((Uart.shiftReg >> 8) & 0x01); - - if(EOC) { - // when End of Communication received and - // all data bits processed.. - return TRUE; } - Uart.bitCnt = 0; - } - - /*if(error) { - Uart.output[Uart.byteCnt] = 0xAA; - Uart.byteCnt++; - Uart.output[Uart.byteCnt] = error & 0xFF; - Uart.byteCnt++; - Uart.output[Uart.byteCnt] = 0xAA; - Uart.byteCnt++; - Uart.output[Uart.byteCnt] = (Uart.bitBuffer >> 8) & 0xFF; - Uart.byteCnt++; - Uart.output[Uart.byteCnt] = Uart.bitBuffer & 0xFF; - Uart.byteCnt++; - Uart.output[Uart.byteCnt] = (Uart.syncBit >> 3) & 0xFF; - Uart.byteCnt++; - Uart.output[Uart.byteCnt] = 0xAA; - Uart.byteCnt++; - return TRUE; - }*/ - } - - } - else { - bit = Uart.bitBuffer & 0xf0; - bit >>= 4; - bit ^= 0x0F; - if(bit) { - // should have been high or at least (4 * 128) / fc - // according to ISO this should be at least (9 * 128 + 20) / fc - if(Uart.highCnt == 8) { - // we went low, so this could be start of communication - // it turns out to be safer to choose a less significant - // syncbit... so we check whether the neighbour also represents the drop - Uart.posCnt = 1; // apparently we are busy with our first half bit period - Uart.syncBit = bit & 8; - Uart.samples = 3; - if(!Uart.syncBit) { Uart.syncBit = bit & 4; Uart.samples = 2; } - else if(bit & 4) { Uart.syncBit = bit & 4; Uart.samples = 2; bit <<= 2; } - if(!Uart.syncBit) { Uart.syncBit = bit & 2; Uart.samples = 1; } - else if(bit & 2) { Uart.syncBit = bit & 2; Uart.samples = 1; bit <<= 1; } - if(!Uart.syncBit) { Uart.syncBit = bit & 1; Uart.samples = 0; - if(Uart.syncBit && (Uart.bitBuffer & 8)) { - Uart.syncBit = 8; - - // the first half bit period is expected in next sample - Uart.posCnt = 0; - Uart.samples = 3; + if (Uart.state == STATE_START_OF_COMMUNICATION) { // error - must not follow directly after SOC + UartReset(); + } else { // a logic "0" + Uart.bitCount++; + Uart.shiftReg = (Uart.shiftReg >> 1); // add a 0 to the shiftreg + Uart.state = STATE_MILLER_Y; + if(Uart.bitCount >= 9) { // if we decoded a full byte (including parity) + Uart.output[Uart.len++] = (Uart.shiftReg & 0xff); + Uart.parityBits <<= 1; // make room for the parity bit + Uart.parityBits |= ((Uart.shiftReg >> 8) & 0x01); // store parity bit + Uart.bitCount = 0; + Uart.shiftReg = 0; + if ((Uart.len&0x0007) == 0) { // every 8 data bytes + Uart.parity[Uart.parityLen++] = Uart.parityBits; // store 8 parity bits + Uart.parityBits = 0; + } } } - else if(bit & 1) { Uart.syncBit = bit & 1; Uart.samples = 0; } - - Uart.syncBit <<= 4; - Uart.state = STATE_START_OF_COMMUNICATION; - Uart.drop = DROP_FIRST_HALF; - Uart.bitCnt = 0; - Uart.byteCnt = 0; - Uart.parityBits = 0; - error = 0; - } - else { - Uart.highCnt = 0; } } - else { - if(Uart.highCnt < 8) { - Uart.highCnt++; - } - } - } - - return FALSE; + } + return FALSE; // not finished yet, need more data } //============================================================================= -// ISO 14443 Type A - Manchester +// ISO 14443 Type A - Manchester decoder //============================================================================= +// Basics: +// This decoder is used when the PM3 acts as a reader. +// The tag will modulate the reader field by asserting different loads to it. As a consequence, the voltage +// at the reader antenna will be modulated as well. The FPGA detects the modulation for us and would deliver e.g. the following: +// ........ 0 0 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ....... +// The Manchester decoder needs to identify the following sequences: +// 4 ticks modulated followed by 4 ticks unmodulated: Sequence D = 1 (also used as "start of communication") +// 4 ticks unmodulated followed by 4 ticks modulated: Sequence E = 0 +// 8 ticks unmodulated: Sequence F = end of communication +// 8 ticks modulated: A collision. Save the collision position and treat as Sequence D +// Note 1: the bitstream may start at any time. We therefore need to sync. +// Note 2: parameter offset is used to determine the position of the parity bits (required for the anticollision command only) +static tDemod Demod; + +// Lookup-Table to decide if 4 raw bits are a modulation. +// We accept three or four "1" in any position +const bool Mod_Manchester_LUT[] = { + FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, TRUE, + FALSE, FALSE, FALSE, TRUE, FALSE, TRUE, TRUE, TRUE +}; -static struct { - enum { - DEMOD_UNSYNCD, - DEMOD_START_OF_COMMUNICATION, - DEMOD_MANCHESTER_D, - DEMOD_MANCHESTER_E, - DEMOD_MANCHESTER_F, - DEMOD_ERROR_WAIT - } state; - int bitCount; - int posCount; - int syncBit; - int parityBits; - uint16_t shiftReg; - int buffer; - int buff; - int samples; - int len; - enum { - SUB_NONE, - SUB_FIRST_HALF, - SUB_SECOND_HALF - } sub; - uint8_t *output; -} Demod; - -static RAMFUNC int ManchesterDecoding(int v) -{ - int bit; - int modulation; - int error = 0; +#define IsManchesterModulationNibble1(b) (Mod_Manchester_LUT[(b & 0x00F0) >> 4]) +#define IsManchesterModulationNibble2(b) (Mod_Manchester_LUT[(b & 0x000F)]) - if(!Demod.buff) { - Demod.buff = 1; - Demod.buffer = v; - return FALSE; - } - else { - bit = Demod.buffer; - Demod.buffer = v; - } +void DemodReset() { + Demod.state = DEMOD_UNSYNCD; + Demod.len = 0; // number of decoded data bytes + Demod.parityLen = 0; + Demod.shiftReg = 0; // shiftreg to hold decoded data bits + Demod.parityBits = 0; // + Demod.collisionPos = 0; // Position of collision bit + Demod.twoBits = 0xffff; // buffer for 2 Bits + Demod.highCnt = 0; + Demod.startTime = 0; + Demod.endTime = 0; + Demod.bitCount = 0; + Demod.syncBit = 0xFFFF; + Demod.samples = 0; +} - if(Demod.state==DEMOD_UNSYNCD) { - Demod.output[Demod.len] = 0xfa; - Demod.syncBit = 0; - //Demod.samples = 0; - Demod.posCount = 1; // This is the first half bit period, so after syncing handle the second part +void DemodInit(uint8_t *data, uint8_t *parity) { + Demod.output = data; + Demod.parity = parity; + DemodReset(); +} - if(bit & 0x08) { - Demod.syncBit = 0x08; - } +// use parameter non_real_time to provide a timestamp. Set to 0 if the decoder should measure real time +static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non_real_time) { + Demod.twoBits = (Demod.twoBits << 8) | bit; + + if (Demod.state == DEMOD_UNSYNCD) { - if(bit & 0x04) { - if(Demod.syncBit) { - bit <<= 4; + if (Demod.highCnt < 2) { // wait for a stable unmodulated signal + if (Demod.twoBits == 0x0000) { + Demod.highCnt++; + } else { + Demod.highCnt = 0; } - Demod.syncBit = 0x04; - } - - if(bit & 0x02) { - if(Demod.syncBit) { - bit <<= 2; + } else { + Demod.syncBit = 0xFFFF; // not set + if ((Demod.twoBits & 0x7700) == 0x7000) Demod.syncBit = 7; + else if ((Demod.twoBits & 0x3B80) == 0x3800) Demod.syncBit = 6; + else if ((Demod.twoBits & 0x1DC0) == 0x1C00) Demod.syncBit = 5; + else if ((Demod.twoBits & 0x0EE0) == 0x0E00) Demod.syncBit = 4; + else if ((Demod.twoBits & 0x0770) == 0x0700) Demod.syncBit = 3; + else if ((Demod.twoBits & 0x03B8) == 0x0380) Demod.syncBit = 2; + else if ((Demod.twoBits & 0x01DC) == 0x01C0) Demod.syncBit = 1; + else if ((Demod.twoBits & 0x00EE) == 0x00E0) Demod.syncBit = 0; + if (Demod.syncBit != 0xFFFF) { + Demod.startTime = non_real_time?non_real_time:(GetCountSspClk() & 0xfffffff8); + Demod.startTime -= Demod.syncBit; + Demod.bitCount = offset; // number of decoded data bits + Demod.state = DEMOD_MANCHESTER_DATA; } - Demod.syncBit = 0x02; } + } else { - if(bit & 0x01 && Demod.syncBit) { - Demod.syncBit = 0x01; - } - - if(Demod.syncBit) { - Demod.len = 0; - Demod.state = DEMOD_START_OF_COMMUNICATION; - Demod.sub = SUB_FIRST_HALF; - Demod.bitCount = 0; - Demod.shiftReg = 0; - Demod.parityBits = 0; - Demod.samples = 0; - if(Demod.posCount) { - if(trigger) LED_A_OFF(); - switch(Demod.syncBit) { - case 0x08: Demod.samples = 3; break; - case 0x04: Demod.samples = 2; break; - case 0x02: Demod.samples = 1; break; - case 0x01: Demod.samples = 0; break; + if (IsManchesterModulationNibble1(Demod.twoBits >> Demod.syncBit)) { // modulation in first half + if (IsManchesterModulationNibble2(Demod.twoBits >> Demod.syncBit)) { // ... and in second half = collision + if (!Demod.collisionPos) { + Demod.collisionPos = (Demod.len << 3) + Demod.bitCount; } - } - error = 0; - } - } - else { - //modulation = bit & Demod.syncBit; - modulation = ((bit << 1) ^ ((Demod.buffer & 0x08) >> 3)) & Demod.syncBit; - - Demod.samples += 4; - - if(Demod.posCount==0) { - Demod.posCount = 1; - if(modulation) { - Demod.sub = SUB_FIRST_HALF; - } - else { - Demod.sub = SUB_NONE; - } - } - else { - Demod.posCount = 0; - if(modulation && (Demod.sub == SUB_FIRST_HALF)) { - if(Demod.state!=DEMOD_ERROR_WAIT) { - Demod.state = DEMOD_ERROR_WAIT; - Demod.output[Demod.len] = 0xaa; - error = 0x01; + } // modulation in first half only - Sequence D = 1 + Demod.bitCount++; + Demod.shiftReg = (Demod.shiftReg >> 1) | 0x100; // in both cases, add a 1 to the shiftreg + if(Demod.bitCount == 9) { // if we decoded a full byte (including parity) + Demod.output[Demod.len++] = (Demod.shiftReg & 0xff); + Demod.parityBits <<= 1; // make room for the parity bit + Demod.parityBits |= ((Demod.shiftReg >> 8) & 0x01); // store parity bit + Demod.bitCount = 0; + Demod.shiftReg = 0; + if((Demod.len&0x0007) == 0) { // every 8 data bytes + Demod.parity[Demod.parityLen++] = Demod.parityBits; // store 8 parity bits + Demod.parityBits = 0; } } - else if(modulation) { - Demod.sub = SUB_SECOND_HALF; - } - - switch(Demod.state) { - case DEMOD_START_OF_COMMUNICATION: - if(Demod.sub == SUB_FIRST_HALF) { - Demod.state = DEMOD_MANCHESTER_D; - } - else { - Demod.output[Demod.len] = 0xab; - Demod.state = DEMOD_ERROR_WAIT; - error = 0x02; - } - break; - - case DEMOD_MANCHESTER_D: - case DEMOD_MANCHESTER_E: - if(Demod.sub == SUB_FIRST_HALF) { - Demod.bitCount++; - Demod.shiftReg = (Demod.shiftReg >> 1) ^ 0x100; - Demod.state = DEMOD_MANCHESTER_D; - } - else if(Demod.sub == SUB_SECOND_HALF) { - Demod.bitCount++; - Demod.shiftReg >>= 1; - Demod.state = DEMOD_MANCHESTER_E; - } - else { - Demod.state = DEMOD_MANCHESTER_F; - } - break; - - case DEMOD_MANCHESTER_F: - // Tag response does not need to be a complete byte! - if(Demod.len > 0 || Demod.bitCount > 0) { - if(Demod.bitCount > 0) { - Demod.shiftReg >>= (9 - Demod.bitCount); - Demod.output[Demod.len] = Demod.shiftReg & 0xff; - Demod.len++; - // No parity bit, so just shift a 0 - Demod.parityBits <<= 1; - } - - Demod.state = DEMOD_UNSYNCD; - return TRUE; + Demod.endTime = Demod.startTime + 8*(9*Demod.len + Demod.bitCount + 1) - 4; + } else { // no modulation in first half + if (IsManchesterModulationNibble2(Demod.twoBits >> Demod.syncBit)) { // and modulation in second half = Sequence E = 0 + Demod.bitCount++; + Demod.shiftReg = (Demod.shiftReg >> 1); // add a 0 to the shiftreg + if(Demod.bitCount >= 9) { // if we decoded a full byte (including parity) + Demod.output[Demod.len++] = (Demod.shiftReg & 0xff); + Demod.parityBits <<= 1; // make room for the new parity bit + Demod.parityBits |= ((Demod.shiftReg >> 8) & 0x01); // store parity bit + Demod.bitCount = 0; + Demod.shiftReg = 0; + if ((Demod.len&0x0007) == 0) { // every 8 data bytes + Demod.parity[Demod.parityLen++] = Demod.parityBits; // store 8 parity bits1 + Demod.parityBits = 0; } - else { - Demod.output[Demod.len] = 0xad; - Demod.state = DEMOD_ERROR_WAIT; - error = 0x03; - } - break; - - case DEMOD_ERROR_WAIT: - Demod.state = DEMOD_UNSYNCD; - break; - - default: - Demod.output[Demod.len] = 0xdd; - Demod.state = DEMOD_UNSYNCD; - break; - } - - if(Demod.bitCount>=9) { - Demod.output[Demod.len] = Demod.shiftReg & 0xff; - Demod.len++; - - Demod.parityBits <<= 1; - Demod.parityBits ^= ((Demod.shiftReg >> 8) & 0x01); - - Demod.bitCount = 0; - Demod.shiftReg = 0; + } + Demod.endTime = Demod.startTime + 8*(9*Demod.len + Demod.bitCount + 1); + } else { // no modulation in both halves - End of communication + if(Demod.bitCount > 0) { // there are some remaining data bits + Demod.shiftReg >>= (9 - Demod.bitCount); // right align the decoded bits + Demod.output[Demod.len++] = Demod.shiftReg & 0xff; // and add them to the output + Demod.parityBits <<= 1; // add a (void) parity bit + Demod.parityBits <<= (8 - (Demod.len&0x0007)); // left align remaining parity bits + Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them + return TRUE; + } else if (Demod.len & 0x0007) { // there are some parity bits to store + Demod.parityBits <<= (8 - (Demod.len&0x0007)); // left align remaining parity bits + Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them + } + if (Demod.len) { + return TRUE; // we are finished with decoding the raw data sequence + } else { // nothing received. Start over + DemodReset(); + } } - - /*if(error) { - Demod.output[Demod.len] = 0xBB; - Demod.len++; - Demod.output[Demod.len] = error & 0xFF; - Demod.len++; - Demod.output[Demod.len] = 0xBB; - Demod.len++; - Demod.output[Demod.len] = bit & 0xFF; - Demod.len++; - Demod.output[Demod.len] = Demod.buffer & 0xFF; - Demod.len++; - Demod.output[Demod.len] = Demod.syncBit & 0xFF; - Demod.len++; - Demod.output[Demod.len] = 0xBB; - Demod.len++; - return TRUE; - }*/ - } - - } // end (state != UNSYNCED) - - return FALSE; + } + return FALSE; // not finished yet, need more data } //============================================================================= @@ -615,181 +498,175 @@ static RAMFUNC int ManchesterDecoding(int v) // Record the sequence of commands sent by the reader to the tag, with // triggering so that we start recording at the point that the tag is moved // near the reader. +// "hf 14a sniff" //----------------------------------------------------------------------------- -void RAMFUNC SnoopIso14443a(void) -{ -// #define RECV_CMD_OFFSET 2032 // original (working as of 21/2/09) values -// #define RECV_RES_OFFSET 2096 // original (working as of 21/2/09) values -// #define DMA_BUFFER_OFFSET 2160 // original (working as of 21/2/09) values -// #define DMA_BUFFER_SIZE 4096 // original (working as of 21/2/09) values -// #define TRACE_LENGTH 2000 // original (working as of 21/2/09) values - - // We won't start recording the frames that we acquire until we trigger; - // a good trigger condition to get started is probably when we see a - // response from the tag. - int triggered = FALSE; // FALSE to wait first for card - - // The command (reader -> tag) that we're receiving. - // The length of a received command will in most cases be no more than 18 bytes. - // So 32 should be enough! - uint8_t *receivedCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET); - // The response (tag -> reader) that we're receiving. - uint8_t *receivedResponse = (((uint8_t *)BigBuf) + RECV_RES_OFFSET); - - // As we receive stuff, we copy it from receivedCmd or receivedResponse - // into trace, along with its length and other annotations. - //uint8_t *trace = (uint8_t *)BigBuf; - - traceLen = 0; // uncommented to fix ISSUE 15 - gerhard - jan2011 - - // The DMA buffer, used to stream samples from the FPGA - int8_t *dmaBuf = ((int8_t *)BigBuf) + DMA_BUFFER_OFFSET; - int lastRxCounter; - int8_t *upTo; - int smpl; - int maxBehindBy = 0; - - // Count of samples received so far, so that we can include timing - // information in the trace buffer. - int samples = 0; - int rsamples = 0; - - memset(trace, 0x44, RECV_CMD_OFFSET); - - // Set up the demodulator for tag -> reader responses. - Demod.output = receivedResponse; - Demod.len = 0; - Demod.state = DEMOD_UNSYNCD; - - // Setup for the DMA. - FpgaSetupSsc(); - upTo = dmaBuf; - lastRxCounter = DMA_BUFFER_SIZE; - FpgaSetupSscDma((uint8_t *)dmaBuf, DMA_BUFFER_SIZE); - - // And the reader -> tag commands - memset(&Uart, 0, sizeof(Uart)); - Uart.output = receivedCmd; - Uart.byteCntMax = 32; // was 100 (greg)//////////////////////////////////////////////////////////////////////// - Uart.state = STATE_UNSYNCD; - - // And put the FPGA in the appropriate mode - // Signal field is off with the appropriate LED - LED_D_OFF(); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_SNIFFER); - SetAdcMuxFor(GPIO_MUXSEL_HIPKD); +void RAMFUNC SniffIso14443a(uint8_t param) { + // param: + // bit 0 - trigger from first card answer + // bit 1 - trigger from first reader 7-bit request + LEDsoff(); + iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER); + + // Allocate memory from BigBuf for some buffers + // free all previous allocations first + BigBuf_free(); BigBuf_Clear_ext(false); + clear_trace(); + set_tracing(TRUE); + + // The command (reader -> tag) that we're receiving. + uint8_t *receivedCmd = BigBuf_malloc(MAX_FRAME_SIZE); + uint8_t *receivedCmdPar = BigBuf_malloc(MAX_PARITY_SIZE); + + // The response (tag -> reader) that we're receiving. + uint8_t *receivedResponse = BigBuf_malloc(MAX_FRAME_SIZE); + uint8_t *receivedResponsePar = BigBuf_malloc(MAX_PARITY_SIZE); + + // The DMA buffer, used to stream samples from the FPGA + uint8_t *dmaBuf = BigBuf_malloc(DMA_BUFFER_SIZE); + + uint8_t *data = dmaBuf; + uint8_t previous_data = 0; + int maxDataLen = 0; + int dataLen = 0; + bool TagIsActive = FALSE; + bool ReaderIsActive = FALSE; + + // Set up the demodulator for tag -> reader responses. + DemodInit(receivedResponse, receivedResponsePar); + + // Set up the demodulator for the reader -> tag commands + UartInit(receivedCmd, receivedCmdPar); + + // Setup and start DMA. + if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, DMA_BUFFER_SIZE) ){ + if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting"); + return; + } + + // We won't start recording the frames that we acquire until we trigger; + // a good trigger condition to get started is probably when we see a + // response from the tag. + // triggered == FALSE -- to wait first for card + bool triggered = !(param & 0x03); + + // And now we loop, receiving samples. + for(uint32_t rsamples = 0; TRUE; ) { - // And now we loop, receiving samples. - for(;;) { - LED_A_ON(); - WDT_HIT(); - int behindBy = (lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR) & - (DMA_BUFFER_SIZE-1); - if(behindBy > maxBehindBy) { - maxBehindBy = behindBy; - if(behindBy > 400) { - Dbprintf("blew circular buffer! behindBy=0x%x", behindBy); - goto done; - } - } - if(behindBy < 1) continue; + if(BUTTON_PRESS()) { + DbpString("cancelled by button"); + break; + } - LED_A_OFF(); - smpl = upTo[0]; - upTo++; - lastRxCounter -= 1; - if(upTo - dmaBuf > DMA_BUFFER_SIZE) { - upTo -= DMA_BUFFER_SIZE; - lastRxCounter += DMA_BUFFER_SIZE; - AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) upTo; - AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE; - } + LED_A_ON(); + WDT_HIT(); - samples += 4; - if(MillerDecoding((smpl & 0xF0) >> 4)) { - rsamples = samples - Uart.samples; - LED_C_ON(); - if(triggered) { - trace[traceLen++] = ((rsamples >> 0) & 0xff); - trace[traceLen++] = ((rsamples >> 8) & 0xff); - trace[traceLen++] = ((rsamples >> 16) & 0xff); - trace[traceLen++] = ((rsamples >> 24) & 0xff); - trace[traceLen++] = ((Uart.parityBits >> 0) & 0xff); - trace[traceLen++] = ((Uart.parityBits >> 8) & 0xff); - trace[traceLen++] = ((Uart.parityBits >> 16) & 0xff); - trace[traceLen++] = ((Uart.parityBits >> 24) & 0xff); - trace[traceLen++] = Uart.byteCnt; - memcpy(trace+traceLen, receivedCmd, Uart.byteCnt); - traceLen += Uart.byteCnt; - if(traceLen > TRACE_LENGTH) break; - } - /* And ready to receive another command. */ - Uart.state = STATE_UNSYNCD; - /* And also reset the demod code, which might have been */ - /* false-triggered by the commands from the reader. */ - Demod.state = DEMOD_UNSYNCD; - LED_B_OFF(); - } + int register readBufDataP = data - dmaBuf; + int register dmaBufDataP = DMA_BUFFER_SIZE - AT91C_BASE_PDC_SSC->PDC_RCR; + if (readBufDataP <= dmaBufDataP){ + dataLen = dmaBufDataP - readBufDataP; + } else { + dataLen = DMA_BUFFER_SIZE - readBufDataP + dmaBufDataP; + } + // test for length of buffer + if(dataLen > maxDataLen) { + maxDataLen = dataLen; + if(dataLen > (9 * DMA_BUFFER_SIZE / 10)) { + Dbprintf("blew circular buffer! dataLen=%d", dataLen); + break; + } + } + if(dataLen < 1) continue; - if(ManchesterDecoding(smpl & 0x0F)) { - rsamples = samples - Demod.samples; - LED_B_ON(); - - // timestamp, as a count of samples - trace[traceLen++] = ((rsamples >> 0) & 0xff); - trace[traceLen++] = ((rsamples >> 8) & 0xff); - trace[traceLen++] = ((rsamples >> 16) & 0xff); - trace[traceLen++] = 0x80 | ((rsamples >> 24) & 0xff); - trace[traceLen++] = ((Demod.parityBits >> 0) & 0xff); - trace[traceLen++] = ((Demod.parityBits >> 8) & 0xff); - trace[traceLen++] = ((Demod.parityBits >> 16) & 0xff); - trace[traceLen++] = ((Demod.parityBits >> 24) & 0xff); - // length - trace[traceLen++] = Demod.len; - memcpy(trace+traceLen, receivedResponse, Demod.len); - traceLen += Demod.len; - if(traceLen > TRACE_LENGTH) break; - - triggered = TRUE; - - // And ready to receive another response. - memset(&Demod, 0, sizeof(Demod)); - Demod.output = receivedResponse; - Demod.state = DEMOD_UNSYNCD; - LED_C_OFF(); - } + // primary buffer was stopped( <-- we lost data! + if (!AT91C_BASE_PDC_SSC->PDC_RCR) { + AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) dmaBuf; + AT91C_BASE_PDC_SSC->PDC_RCR = DMA_BUFFER_SIZE; + Dbprintf("RxEmpty ERROR!!! data length:%d", dataLen); // temporary + } + // secondary buffer sets as primary, secondary buffer was stopped + if (!AT91C_BASE_PDC_SSC->PDC_RNCR) { + AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) dmaBuf; + AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE; + } - if(BUTTON_PRESS()) { - DbpString("cancelled_a"); - goto done; - } - } + LED_A_OFF(); + + if (rsamples & 0x01) { // Need two samples to feed Miller and Manchester-Decoder + + if(!TagIsActive) { // no need to try decoding reader data if the tag is sending + uint8_t readerdata = (previous_data & 0xF0) | (*data >> 4); + if (MillerDecoding(readerdata, (rsamples-1)*4)) { + LED_C_ON(); + + // check - if there is a short 7bit request from reader + if ((!triggered) && (param & 0x02) && (Uart.len == 1) && (Uart.bitCount == 7)) triggered = TRUE; + + if(triggered) { + if (!LogTrace(receivedCmd, + Uart.len, + Uart.startTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER, + Uart.endTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER, + Uart.parity, + TRUE)) break; + } + /* And ready to receive another command. */ + UartReset(); + /* And also reset the demod code, which might have been */ + /* false-triggered by the commands from the reader. */ + DemodReset(); + LED_B_OFF(); + } + ReaderIsActive = (Uart.state != STATE_UNSYNCD); + } - DbpString("COMMAND FINISHED"); + if(!ReaderIsActive) { // no need to try decoding tag data if the reader is sending - and we cannot afford the time + uint8_t tagdata = (previous_data << 4) | (*data & 0x0F); + if(ManchesterDecoding(tagdata, 0, (rsamples-1)*4)) { + LED_B_ON(); + + if (!LogTrace(receivedResponse, + Demod.len, + Demod.startTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER, + Demod.endTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER, + Demod.parity, + FALSE)) break; + + if ((!triggered) && (param & 0x01)) triggered = TRUE; + + // And ready to receive another response. + DemodReset(); + // And reset the Miller decoder including itS (now outdated) input buffer + UartInit(receivedCmd, receivedCmdPar); + LED_C_OFF(); + } + TagIsActive = (Demod.state != DEMOD_UNSYNCD); + } + } - Dbprintf("%x %x %x", maxBehindBy, Uart.state, Uart.byteCnt); - Dbprintf("%x %x %x", Uart.byteCntMax, traceLen, (int)Uart.output[0]); + previous_data = *data; + rsamples++; + data++; + if(data == dmaBuf + DMA_BUFFER_SIZE) { + data = dmaBuf; + } + } // main cycle -done: - AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; - Dbprintf("%x %x %x", maxBehindBy, Uart.state, Uart.byteCnt); - Dbprintf("%x %x %x", Uart.byteCntMax, traceLen, (int)Uart.output[0]); - LED_A_OFF(); - LED_B_OFF(); - LED_C_OFF(); - LED_D_OFF(); + if (MF_DBGLEVEL >= 1) { + Dbprintf("maxDataLen=%d, Uart.state=%x, Uart.len=%d", maxDataLen, Uart.state, Uart.len); + Dbprintf("traceLen=%d, Uart.output[0]=%08x", BigBuf_get_traceLen(), (uint32_t)Uart.output[0]); + } + FpgaDisableSscDma(); + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + LEDsoff(); + set_tracing(FALSE); } //----------------------------------------------------------------------------- // Prepare tag messages //----------------------------------------------------------------------------- -static void CodeIso14443aAsTag(const uint8_t *cmd, int len) -{ - int i; - int oddparity; - - ToSendReset(); +static void CodeIso14443aAsTagPar(const uint8_t *cmd, uint16_t len, uint8_t *parity) { + ToSendReset(); // Correction bit, might be removed when not needed ToSendStuffBit(0); @@ -800,59 +677,51 @@ static void CodeIso14443aAsTag(const uint8_t *cmd, int len) ToSendStuffBit(0); ToSendStuffBit(0); ToSendStuffBit(0); - + // Send startbit ToSend[++ToSendMax] = SEC_D; + LastProxToAirDuration = 8 * ToSendMax - 4; - for(i = 0; i < len; i++) { - int j; - uint8_t b = cmd[i]; + for(uint16_t i = 0; i < len; i++) { + uint8_t b = cmd[i]; // Data bits - oddparity = 0x01; - for(j = 0; j < 8; j++) { - oddparity ^= (b & 1); + for(uint16_t j = 0; j < 8; j++) { if(b & 1) { ToSend[++ToSendMax] = SEC_D; } else { ToSend[++ToSendMax] = SEC_E; - } - b >>= 1; - } + } + b >>= 1; + } - // Parity bit - if(oddparity) { - ToSend[++ToSendMax] = SEC_D; + // Get the parity bit + if (parity[i>>3] & (0x80>>(i&0x0007))) { + ToSend[++ToSendMax] = SEC_D; + LastProxToAirDuration = 8 * ToSendMax - 4; } else { ToSend[++ToSendMax] = SEC_E; + LastProxToAirDuration = 8 * ToSendMax; } - } - - // Send stopbit - ToSend[++ToSendMax] = SEC_F; - - // Flush the buffer in FPGA!! - for(i = 0; i < 5; i++) { - ToSend[++ToSendMax] = SEC_F; } - // Convert from last byte pos to length - ToSendMax++; + // Send stopbit + ToSend[++ToSendMax] = SEC_F; - // Add a few more for slop - ToSend[ToSendMax++] = 0x00; - ToSend[ToSendMax++] = 0x00; - //ToSendMax += 2; + // Convert from last byte pos to length + ++ToSendMax; } -//----------------------------------------------------------------------------- -// This is to send a NACK kind of answer, its only 3 bits, I know it should be 4 -//----------------------------------------------------------------------------- -static void CodeStrangeAnswer() -{ - int i; +static void CodeIso14443aAsTag(const uint8_t *cmd, uint16_t len) { + uint8_t par[MAX_PARITY_SIZE] = {0}; + GetParity(cmd, len, par); + CodeIso14443aAsTagPar(cmd, len, par); +} + +static void Code4bitAnswerAsTag(uint8_t cmd) { + uint8_t b = cmd; - ToSendReset(); + ToSendReset(); // Correction bit, might be removed when not needed ToSendStuffBit(0); @@ -867,30 +736,22 @@ static void CodeStrangeAnswer() // Send startbit ToSend[++ToSendMax] = SEC_D; - // 0 - ToSend[++ToSendMax] = SEC_E; - - // 0 - ToSend[++ToSendMax] = SEC_E; - - // 1 - ToSend[++ToSendMax] = SEC_D; - - // Send stopbit - ToSend[++ToSendMax] = SEC_F; - - // Flush the buffer in FPGA!! - for(i = 0; i < 5; i++) { - ToSend[++ToSendMax] = SEC_F; + for(uint8_t i = 0; i < 4; i++) { + if(b & 1) { + ToSend[++ToSendMax] = SEC_D; + LastProxToAirDuration = 8 * ToSendMax - 4; + } else { + ToSend[++ToSendMax] = SEC_E; + LastProxToAirDuration = 8 * ToSendMax; + } + b >>= 1; } - // Convert from last byte pos to length - ToSendMax++; + // Send stopbit + ToSend[++ToSendMax] = SEC_F; - // Add a few more for slop - ToSend[ToSendMax++] = 0x00; - ToSend[ToSendMax++] = 0x00; - //ToSendMax += 2; + // Convert from last byte pos to length + ToSendMax++; } //----------------------------------------------------------------------------- @@ -898,264 +759,565 @@ static void CodeStrangeAnswer() // Stop when button is pressed // Or return TRUE when command is captured //----------------------------------------------------------------------------- -static int GetIso14443aCommandFromReader(uint8_t *received, int *len, int maxLen) -{ +int GetIso14443aCommandFromReader(uint8_t *received, uint8_t *parity, int *len) { // Set FPGA mode to "simulated ISO 14443 tag", no modulation (listen // only, since we are receiving, not transmitting). // Signal field is off with the appropriate LED LED_D_OFF(); FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_LISTEN); - // Now run a `software UART' on the stream of incoming samples. - Uart.output = received; - Uart.byteCntMax = maxLen; - Uart.state = STATE_UNSYNCD; + // Now run a `software UART` on the stream of incoming samples. + UartInit(received, parity); + + // clear RXRDY: + uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR; for(;;) { WDT_HIT(); if(BUTTON_PRESS()) return FALSE; - - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - AT91C_BASE_SSC->SSC_THR = 0x00; - } + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { - uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR; - if(MillerDecoding((b & 0xf0) >> 4)) { - *len = Uart.byteCnt; - return TRUE; - } - if(MillerDecoding(b & 0x0f)) { - *len = Uart.byteCnt; + b = (uint8_t)AT91C_BASE_SSC->SSC_RHR; + if(MillerDecoding(b, 0)) { + *len = Uart.len; return TRUE; } - } + } } } -//----------------------------------------------------------------------------- -// Main loop of simulated tag: receive commands from reader, decide what -// response to send, and send it. -//----------------------------------------------------------------------------- -void SimulateIso14443aTag(int tagType, int TagUid) -{ - // This function contains the tag emulation - - // Prepare protocol messages - // static const uint8_t cmd1[] = { 0x26 }; -// static const uint8_t response1[] = { 0x02, 0x00 }; // Says: I am Mifare 4k - original line - greg -// - static const uint8_t response1[] = { 0x44, 0x03 }; // Says: I am a DESFire Tag, ph33r me -// static const uint8_t response1[] = { 0x44, 0x00 }; // Says: I am a ULTRALITE Tag, 0wn me - - // UID response - // static const uint8_t cmd2[] = { 0x93, 0x20 }; - //static const uint8_t response2[] = { 0x9a, 0xe5, 0xe4, 0x43, 0xd8 }; // original value - greg - -// my desfire - static const uint8_t response2[] = { 0x88, 0x04, 0x21, 0x3f, 0x4d }; // known uid - note cascade (0x88), 2nd byte (0x04) = NXP/Phillips - - -// When reader selects us during cascade1 it will send cmd3 -//uint8_t response3[] = { 0x04, 0x00, 0x00 }; // SAK Select (cascade1) successful response (ULTRALITE) -uint8_t response3[] = { 0x24, 0x00, 0x00 }; // SAK Select (cascade1) successful response (DESFire) -ComputeCrc14443(CRC_14443_A, response3, 1, &response3[1], &response3[2]); - -// send cascade2 2nd half of UID -static const uint8_t response2a[] = { 0x51, 0x48, 0x1d, 0x80, 0x84 }; // uid - cascade2 - 2nd half (4 bytes) of UID+ BCCheck -// NOTE : THE CRC on the above may be wrong as I have obfuscated the actual UID - -// When reader selects us during cascade2 it will send cmd3a -//uint8_t response3a[] = { 0x00, 0x00, 0x00 }; // SAK Select (cascade2) successful response (ULTRALITE) -uint8_t response3a[] = { 0x20, 0x00, 0x00 }; // SAK Select (cascade2) successful response (DESFire) -ComputeCrc14443(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]); - - static const uint8_t response5[] = { 0x00, 0x00, 0x00, 0x00 }; // Very random tag nonce - - uint8_t *resp; - int respLen; - - // Longest possible response will be 16 bytes + 2 CRC = 18 bytes - // This will need +bool prepare_tag_modulation(tag_response_info_t* response_info, size_t max_buffer_size) { + // Example response, answer to MIFARE Classic read block will be 16 bytes + 2 CRC = 18 bytes + // This will need the following byte array for a modulation sequence // 144 data bits (18 * 8) // 18 parity bits // 2 Start and stop // 1 Correction bit (Answer in 1172 or 1236 periods, see FPGA) // 1 just for the case // ----------- + - // 166 - // - // 166 bytes, since every bit that needs to be send costs us a byte + // 166 bytes, since every bit that needs to be send costs us a byte // + // Prepare the tag modulation bits from the message + CodeIso14443aAsTag(response_info->response,response_info->response_n); - // Respond with card type - uint8_t *resp1 = (((uint8_t *)BigBuf) + 800); - int resp1Len; - - // Anticollision cascade1 - respond with uid - uint8_t *resp2 = (((uint8_t *)BigBuf) + 970); - int resp2Len; - - // Anticollision cascade2 - respond with 2nd half of uid if asked - // we're only going to be asked if we set the 1st byte of the UID (during cascade1) to 0x88 - uint8_t *resp2a = (((uint8_t *)BigBuf) + 1140); - int resp2aLen; + // Make sure we do not exceed the free buffer space + if (ToSendMax > max_buffer_size) { + Dbprintf("Out of memory, when modulating bits for tag answer:"); + Dbhexdump(response_info->response_n,response_info->response,false); + return FALSE; + } - // Acknowledge select - cascade 1 - uint8_t *resp3 = (((uint8_t *)BigBuf) + 1310); - int resp3Len; + // Copy the byte array, used for this modulation to the buffer position + memcpy(response_info->modulation,ToSend,ToSendMax); - // Acknowledge select - cascade 2 - uint8_t *resp3a = (((uint8_t *)BigBuf) + 1480); - int resp3aLen; + // Store the number of bytes that were used for encoding/modulation and the time needed to transfer them + response_info->modulation_n = ToSendMax; + response_info->ProxToAirDuration = LastProxToAirDuration; + return TRUE; +} - // Response to a read request - not implemented atm - uint8_t *resp4 = (((uint8_t *)BigBuf) + 1550); - int resp4Len; +// "precompile" responses. There are 7 predefined responses with a total of 28 bytes data to transmit. +// Coded responses need one byte per bit to transfer (data, parity, start, stop, correction) +// 28 * 8 data bits, 28 * 1 parity bits, 7 start bits, 7 stop bits, 7 correction bits +// -> need 273 bytes buffer +// 44 * 8 data bits, 44 * 1 parity bits, 9 start bits, 9 stop bits, 9 correction bits --370 +// 47 * 8 data bits, 47 * 1 parity bits, 10 start bits, 10 stop bits, 10 correction bits +#define ALLOCATED_TAG_MODULATION_BUFFER_SIZE 453 + +bool prepare_allocated_tag_modulation(tag_response_info_t* response_info) { + // Retrieve and store the current buffer index + response_info->modulation = free_buffer_pointer; + + // Determine the maximum size we can use from our buffer + size_t max_buffer_size = ALLOCATED_TAG_MODULATION_BUFFER_SIZE; + + // Forward the prepare tag modulation function to the inner function + if (prepare_tag_modulation(response_info, max_buffer_size)) { + // Update the free buffer offset + free_buffer_pointer += ToSendMax; + return true; + } else { + return false; + } +} - // Authenticate response - nonce - uint8_t *resp5 = (((uint8_t *)BigBuf) + 1720); - int resp5Len; +//----------------------------------------------------------------------------- +// Main loop of simulated tag: receive commands from reader, decide what +// response to send, and send it. +// 'hf 14a sim' +//----------------------------------------------------------------------------- +void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { - uint8_t *receivedCmd = (uint8_t *)BigBuf; - int len; + #define ATTACK_KEY_COUNT 8 // keep same as define in cmdhfmf.c -> readerAttack() + // init pseudorand + fast_prand(); + + uint8_t sak = 0; + uint32_t cuid = 0; + uint32_t nonce = 0; + + // PACK response to PWD AUTH for EV1/NTAG + uint8_t response8[4] = {0,0,0,0}; + // Counter for EV1/NTAG + uint32_t counters[] = {0,0,0}; + + // The first response contains the ATQA (note: bytes are transmitted in reverse order). + uint8_t response1[] = {0,0}; + + // Here, we collect CUID, block1, keytype1, NT1, NR1, AR1, CUID, block2, keytyp2, NT2, NR2, AR2 + // it should also collect block, keytype. + uint8_t cardAUTHSC = 0; + uint8_t cardAUTHKEY = 0xff; // no authentication + // allow collecting up to 8 sets of nonces to allow recovery of up to 8 keys + + nonces_t ar_nr_nonces[ATTACK_KEY_COUNT]; // for attack types moebius + memset(ar_nr_nonces, 0x00, sizeof(ar_nr_nonces)); + uint8_t moebius_count = 0; + + switch (tagType) { + case 1: { // MIFARE Classic 1k + response1[0] = 0x04; + sak = 0x08; + } break; + case 2: { // MIFARE Ultralight + response1[0] = 0x44; + sak = 0x00; + } break; + case 3: { // MIFARE DESFire + response1[0] = 0x04; + response1[1] = 0x03; + sak = 0x20; + } break; + case 4: { // ISO/IEC 14443-4 - javacard (JCOP) + response1[0] = 0x04; + sak = 0x28; + } break; + case 5: { // MIFARE TNP3XXX + response1[0] = 0x01; + response1[1] = 0x0f; + sak = 0x01; + } break; + case 6: { // MIFARE Mini 320b + response1[0] = 0x44; + sak = 0x09; + } break; + case 7: { // NTAG + response1[0] = 0x44; + sak = 0x00; + // PACK + response8[0] = 0x80; + response8[1] = 0x80; + ComputeCrc14443(CRC_14443_A, response8, 2, &response8[2], &response8[3]); + // uid not supplied then get from emulator memory + if (data[0]==0) { + uint16_t start = 4 * (0+12); + uint8_t emdata[8]; + emlGetMemBt( emdata, start, sizeof(emdata)); + memcpy(data, emdata, 3); // uid bytes 0-2 + memcpy(data+3, emdata+4, 4); // uid bytes 3-7 + flags |= FLAG_7B_UID_IN_DATA; + } + } break; + case 8: { // MIFARE Classic 4k + response1[0] = 0x02; + sak = 0x18; + } break; + default: { + Dbprintf("Error: unkown tagtype (%d)",tagType); + return; + } break; + } + + // The second response contains the (mandatory) first 24 bits of the UID + uint8_t response2[5] = {0x00}; - int i; - int u; - uint8_t b; + // For UID size 7, + uint8_t response2a[5] = {0x00}; + + if ( (flags & FLAG_7B_UID_IN_DATA) == FLAG_7B_UID_IN_DATA ) { + response2[0] = 0x88; // Cascade Tag marker + response2[1] = data[0]; + response2[2] = data[1]; + response2[3] = data[2]; + + response2a[0] = data[3]; + response2a[1] = data[4]; + response2a[2] = data[5]; + response2a[3] = data[6]; //?? + response2a[4] = response2a[0] ^ response2a[1] ^ response2a[2] ^ response2a[3]; + + // Configure the ATQA and SAK accordingly + response1[0] |= 0x40; + sak |= 0x04; + + cuid = bytes_to_num(data+3, 4); + } else { + memcpy(response2, data, 4); + // Configure the ATQA and SAK accordingly + response1[0] &= 0xBF; + sak &= 0xFB; + cuid = bytes_to_num(data, 4); + } - // To control where we are in the protocol - int order = 0; - int lastorder; + // Calculate the BitCountCheck (BCC) for the first 4 bytes of the UID. + response2[4] = response2[0] ^ response2[1] ^ response2[2] ^ response2[3]; - // Just to allow some checks - int happened = 0; - int happened2 = 0; + // Prepare the mandatory SAK (for 4 and 7 byte UID) + uint8_t response3[3] = {sak, 0x00, 0x00}; + ComputeCrc14443(CRC_14443_A, response3, 1, &response3[1], &response3[2]); - int cmdsRecvd = 0; + // Prepare the optional second SAK (for 7 byte UID), drop the cascade bit + uint8_t response3a[3] = {0x00}; + response3a[0] = sak & 0xFB; + ComputeCrc14443(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]); - int fdt_indicator; + // Tag NONCE. + uint8_t response5[4]; + + uint8_t response6[] = { 0x04, 0x58, 0x80, 0x02, 0x00, 0x00 }; // dummy ATS (pseudo-ATR), answer to RATS: + // Format byte = 0x58: FSCI=0x08 (FSC=256), TA(1) and TC(1) present, + // TA(1) = 0x80: different divisors not supported, DR = 1, DS = 1 + // TB(1) = not present. Defaults: FWI = 4 (FWT = 256 * 16 * 2^4 * 1/fc = 4833us), SFGI = 0 (SFG = 256 * 16 * 2^0 * 1/fc = 302us) + // TC(1) = 0x02: CID supported, NAD not supported + ComputeCrc14443(CRC_14443_A, response6, 4, &response6[4], &response6[5]); + + // Prepare GET_VERSION (different for UL EV-1 / NTAG) + // uint8_t response7_EV1[] = {0x00, 0x04, 0x03, 0x01, 0x01, 0x00, 0x0b, 0x03, 0xfd, 0xf7}; //EV1 48bytes VERSION. + // uint8_t response7_NTAG[] = {0x00, 0x04, 0x04, 0x02, 0x01, 0x00, 0x11, 0x03, 0x01, 0x9e}; //NTAG 215 + // Prepare CHK_TEARING + // uint8_t response9[] = {0xBD,0x90,0x3f}; + + #define TAG_RESPONSE_COUNT 10 + tag_response_info_t responses[TAG_RESPONSE_COUNT] = { + { .response = response1, .response_n = sizeof(response1) }, // Answer to request - respond with card type + { .response = response2, .response_n = sizeof(response2) }, // Anticollision cascade1 - respond with uid + { .response = response2a, .response_n = sizeof(response2a) }, // Anticollision cascade2 - respond with 2nd half of uid if asked + { .response = response3, .response_n = sizeof(response3) }, // Acknowledge select - cascade 1 + { .response = response3a, .response_n = sizeof(response3a) }, // Acknowledge select - cascade 2 + { .response = response5, .response_n = sizeof(response5) }, // Authentication answer (random nonce) + { .response = response6, .response_n = sizeof(response6) }, // dummy ATS (pseudo-ATR), answer to RATS + + { .response = response8, .response_n = sizeof(response8) } // EV1/NTAG PACK response + }; + // { .response = response7_NTAG, .response_n = sizeof(response7_NTAG)}, // EV1/NTAG GET_VERSION response + // { .response = response9, .response_n = sizeof(response9) } // EV1/NTAG CHK_TEAR response + - memset(receivedCmd, 0x44, 400); + // Allocate 512 bytes for the dynamic modulation, created when the reader queries for it + // Such a response is less time critical, so we can prepare them on the fly + #define DYNAMIC_RESPONSE_BUFFER_SIZE 64 + #define DYNAMIC_MODULATION_BUFFER_SIZE 512 + uint8_t dynamic_response_buffer[DYNAMIC_RESPONSE_BUFFER_SIZE]; + uint8_t dynamic_modulation_buffer[DYNAMIC_MODULATION_BUFFER_SIZE]; + tag_response_info_t dynamic_response_info = { + .response = dynamic_response_buffer, + .response_n = 0, + .modulation = dynamic_modulation_buffer, + .modulation_n = 0 + }; + + // We need to listen to the high-frequency, peak-detected path. + iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN); + + BigBuf_free_keep_EM(); + clear_trace(); + set_tracing(TRUE); + + // allocate buffers: + uint8_t *receivedCmd = BigBuf_malloc(MAX_FRAME_SIZE); + uint8_t *receivedCmdPar = BigBuf_malloc(MAX_PARITY_SIZE); + free_buffer_pointer = BigBuf_malloc(ALLOCATED_TAG_MODULATION_BUFFER_SIZE); // Prepare the responses of the anticollision phase // there will be not enough time to do this at the moment the reader sends it REQA + for (size_t i=0; i 0) { + num_to_bytes(counters[index], 3, cmd); + AppendCrc14443a(cmd, sizeof(cmd)-2); + } + EmSendCmdEx(cmd,sizeof(cmd)); + p_response = NULL; + } else if (receivedCmd[0] == MIFARE_ULEV1_INCR_CNT && tagType == 7) { // Received a INC COUNTER -- + // number of counter + uint8_t counter = receivedCmd[1]; + uint32_t val = bytes_to_num(receivedCmd+2,4); + counters[counter] = val; + + // send ACK + uint8_t ack[] = {0x0a}; + EmSendCmdEx(ack,sizeof(ack)); + p_response = NULL; + } else if(receivedCmd[0] == MIFARE_ULEV1_CHECKTEAR && tagType == 7) { // Received a CHECK_TEARING_EVENT -- + // first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature] + uint8_t emdata[3]; + uint8_t counter=0; + if (receivedCmd[1]<3) counter = receivedCmd[1]; + emlGetMemBt( emdata, 10+counter, 1); + AppendCrc14443a(emdata, sizeof(emdata)-2); + EmSendCmdEx(emdata, sizeof(emdata)); + p_response = NULL; + } else if(receivedCmd[0] == ISO14443A_CMD_HALT) { // Received a HALT + LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + p_response = NULL; + } else if(receivedCmd[0] == MIFARE_AUTH_KEYA || receivedCmd[0] == MIFARE_AUTH_KEYB) { // Received an authentication request + if ( tagType == 7 ) { // IF NTAG /EV1 0x60 == GET_VERSION, not a authentication request. + uint8_t emdata[10]; + emlGetMemBt( emdata, 0, 8 ); + AppendCrc14443a(emdata, sizeof(emdata)-2); + EmSendCmdEx(emdata, sizeof(emdata)); + p_response = NULL; + } else { + + cardAUTHKEY = receivedCmd[0] - 0x60; + cardAUTHSC = receivedCmd[1] / 4; // received block num + + // incease nonce at AUTH requests. this is time consuming. + nonce = prand(); + //num_to_bytes(nonce, 4, response5); + num_to_bytes(nonce, 4, dynamic_response_info.response); + dynamic_response_info.response_n = 4; + + //prepare_tag_modulation(&responses[5], DYNAMIC_MODULATION_BUFFER_SIZE); + prepare_tag_modulation(&dynamic_response_info, DYNAMIC_MODULATION_BUFFER_SIZE); + p_response = &dynamic_response_info; + //p_response = &responses[5]; + order = 7; + } + } else if(receivedCmd[0] == ISO14443A_CMD_RATS) { // Received a RATS request + if (tagType == 1 || tagType == 2) { // RATS not supported + EmSend4bit(CARD_NACK_NA); + p_response = NULL; + } else { + p_response = &responses[6]; order = 70; + } + } else if (order == 7 && len == 8) { // Received {nr] and {ar} (part of authentication) + LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + uint32_t nr = bytes_to_num(receivedCmd,4); + uint32_t ar = bytes_to_num(receivedCmd+4,4); + + // Collect AR/NR per keytype & sector + if ( (flags & FLAG_NR_AR_ATTACK) == FLAG_NR_AR_ATTACK ) { + + int8_t index = -1; + int8_t empty = -1; + for (uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) { + // find which index to use + if ( (cardAUTHSC == ar_nr_nonces[i].sector) && (cardAUTHKEY == ar_nr_nonces[i].keytype)) + index = i; + + // keep track of empty slots. + if ( ar_nr_nonces[i].state == EMPTY) + empty = i; + } + // if no empty slots. Choose first and overwrite. + if ( index == -1 ) { + if ( empty == -1 ) { + index = 0; + ar_nr_nonces[index].state = EMPTY; + } else { + index = empty; + } + } - if(!GetIso14443aCommandFromReader(receivedCmd, &len, 100)) { - DbpString("button press"); - break; - } - // doob - added loads of debug strings so we can see what the reader is saying to us during the sim as hi14alist is not populated - // Okay, look at the command now. - lastorder = order; - i = 1; // first byte transmitted - if(receivedCmd[0] == 0x26) { - // Received a REQUEST - resp = resp1; respLen = resp1Len; order = 1; - //DbpString("Hello request from reader:"); - } else if(receivedCmd[0] == 0x52) { - // Received a WAKEUP - resp = resp1; respLen = resp1Len; order = 6; -// //DbpString("Wakeup request from reader:"); - - } else if(receivedCmd[1] == 0x20 && receivedCmd[0] == 0x93) { // greg - cascade 1 anti-collision - // Received request for UID (cascade 1) - resp = resp2; respLen = resp2Len; order = 2; -// DbpString("UID (cascade 1) request from reader:"); -// DbpIntegers(receivedCmd[0], receivedCmd[1], receivedCmd[2]); - - - } else if(receivedCmd[1] == 0x20 && receivedCmd[0] ==0x95) { // greg - cascade 2 anti-collision - // Received request for UID (cascade 2) - resp = resp2a; respLen = resp2aLen; order = 20; -// DbpString("UID (cascade 2) request from reader:"); -// DbpIntegers(receivedCmd[0], receivedCmd[1], receivedCmd[2]); - - - } else if(receivedCmd[1] == 0x70 && receivedCmd[0] ==0x93) { // greg - cascade 1 select - // Received a SELECT - resp = resp3; respLen = resp3Len; order = 3; -// DbpString("Select (cascade 1) request from reader:"); -// DbpIntegers(receivedCmd[0], receivedCmd[1], receivedCmd[2]); - - - } else if(receivedCmd[1] == 0x70 && receivedCmd[0] ==0x95) { // greg - cascade 2 select - // Received a SELECT - resp = resp3a; respLen = resp3aLen; order = 30; -// DbpString("Select (cascade 2) request from reader:"); -// DbpIntegers(receivedCmd[0], receivedCmd[1], receivedCmd[2]); - - - } else if(receivedCmd[0] == 0x30) { - // Received a READ - resp = resp4; respLen = resp4Len; order = 4; // Do nothing - Dbprintf("Read request from reader: %x %x %x", - receivedCmd[0], receivedCmd[1], receivedCmd[2]); - - - } else if(receivedCmd[0] == 0x50) { - // Received a HALT - resp = resp1; respLen = 0; order = 5; // Do nothing - DbpString("Reader requested we HALT!:"); - - } else if(receivedCmd[0] == 0x60) { - // Received an authentication request - resp = resp5; respLen = resp5Len; order = 7; - Dbprintf("Authenticate request from reader: %x %x %x", - receivedCmd[0], receivedCmd[1], receivedCmd[2]); - - } else if(receivedCmd[0] == 0xE0) { - // Received a RATS request - resp = resp1; respLen = 0;order = 70; - Dbprintf("RATS request from reader: %x %x %x", - receivedCmd[0], receivedCmd[1], receivedCmd[2]); - } else { - // Never seen this command before - Dbprintf("Unknown command received from reader (len=%d): %x %x %x %x %x %x %x %x %x", - len, - receivedCmd[0], receivedCmd[1], receivedCmd[2], - receivedCmd[3], receivedCmd[4], receivedCmd[5], - receivedCmd[6], receivedCmd[7], receivedCmd[8]); - // Do not respond - resp = resp1; respLen = 0; order = 0; - } + switch(ar_nr_nonces[index].state) { + case EMPTY: { + // first nonce collect + ar_nr_nonces[index].cuid = cuid; + ar_nr_nonces[index].sector = cardAUTHSC; + ar_nr_nonces[index].keytype = cardAUTHKEY; + ar_nr_nonces[index].nonce = nonce; + ar_nr_nonces[index].nr = nr; + ar_nr_nonces[index].ar = ar; + ar_nr_nonces[index].state = FIRST; + break; + } + case FIRST : { + // second nonce collect + ar_nr_nonces[index].nonce2 = nonce; + ar_nr_nonces[index].nr2 = nr; + ar_nr_nonces[index].ar2 = ar; + ar_nr_nonces[index].state = SECOND; + + // send to client + cmd_send(CMD_ACK, CMD_SIMULATE_MIFARE_CARD, 0, 0, &ar_nr_nonces[index], sizeof(nonces_t)); + + ar_nr_nonces[index].state = EMPTY; + ar_nr_nonces[index].sector = 0; + ar_nr_nonces[index].keytype = 0; + + moebius_count++; + break; + } + default: break; + } + } + p_response = NULL; + + } else if (receivedCmd[0] == MIFARE_ULC_AUTH_1 ) { // ULC authentication, or Desfire Authentication + } else if (receivedCmd[0] == MIFARE_ULEV1_AUTH) { // NTAG / EV-1 authentication + if ( tagType == 7 ) { + uint16_t start = 13; // first 4 blocks of emu are [getversion answer - check tearing - pack - 0x00] + uint8_t emdata[4]; + emlGetMemBt( emdata, start, 2); + AppendCrc14443a(emdata, 2); + EmSendCmdEx(emdata, sizeof(emdata)); + p_response = NULL; + uint32_t pwd = bytes_to_num(receivedCmd+1,4); + + if ( MF_DBGLEVEL >= 3) Dbprintf("Auth attempt: %08x", pwd); + } + } else { + // Check for ISO 14443A-4 compliant commands, look at left nibble + switch (receivedCmd[0]) { + case 0x02: + case 0x03: { // IBlock (command no CID) + dynamic_response_info.response[0] = receivedCmd[0]; + dynamic_response_info.response[1] = 0x90; + dynamic_response_info.response[2] = 0x00; + dynamic_response_info.response_n = 3; + } break; + case 0x0B: + case 0x0A: { // IBlock (command CID) + dynamic_response_info.response[0] = receivedCmd[0]; + dynamic_response_info.response[1] = 0x00; + dynamic_response_info.response[2] = 0x90; + dynamic_response_info.response[3] = 0x00; + dynamic_response_info.response_n = 4; + } break; + + case 0x1A: + case 0x1B: { // Chaining command + dynamic_response_info.response[0] = 0xaa | ((receivedCmd[0]) & 1); + dynamic_response_info.response_n = 2; + } break; + + case 0xAA: + case 0xBB: { + dynamic_response_info.response[0] = receivedCmd[0] ^ 0x11; + dynamic_response_info.response_n = 2; + } break; + + case 0xBA: { // ping / pong + dynamic_response_info.response[0] = 0xAB; + dynamic_response_info.response[1] = 0x00; + dynamic_response_info.response_n = 2; + } break; + + case 0xCA: + case 0xC2: { // Readers sends deselect command + dynamic_response_info.response[0] = 0xCA; + dynamic_response_info.response[1] = 0x00; + dynamic_response_info.response_n = 2; + } break; + + default: { + // Never seen this command before + LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + Dbprintf("Received unknown command (len=%d):",len); + Dbhexdump(len,receivedCmd,false); + // Do not respond + dynamic_response_info.response_n = 0; + } break; + } + + if (dynamic_response_info.response_n > 0) { + // Copy the CID from the reader query + dynamic_response_info.response[1] = receivedCmd[1]; + + // Add CRC bytes, always used in ISO 14443A-4 compliant cards + AppendCrc14443a(dynamic_response_info.response, dynamic_response_info.response_n); + dynamic_response_info.response_n += 2; + + if (prepare_tag_modulation(&dynamic_response_info,DYNAMIC_MODULATION_BUFFER_SIZE) == false) { + DbpString("Error preparing tag response"); + LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + break; + } + p_response = &dynamic_response_info; + } + } // Count number of wakeups received after a halt if(order == 6 && lastorder == 5) { happened++; } @@ -1163,587 +1325,1035 @@ ComputeCrc14443(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]); // Count number of other messages after a halt if(order != 6 && lastorder == 5) { happened2++; } - // Look at last parity bit to determine timing of answer - if((Uart.parityBits & 0x01) || receivedCmd[0] == 0x52) { - // 1236, so correction bit needed - i = 0; + // comment this limit if you want to simulation longer + if (!tracing) { + DbpString("Trace Full. Simulation stopped."); + break; } - - memset(receivedCmd, 0x44, 32); - + // comment this limit if you want to simulation longer if(cmdsRecvd > 999) { DbpString("1000 commands later..."); - break; - } - else { - cmdsRecvd++; + break; } + cmdsRecvd++; - if(respLen <= 0) continue; - - // Modulate Manchester - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_MOD); - AT91C_BASE_SSC->SSC_THR = 0x00; - FpgaSetupSsc(); - - // ### Transmit the response ### - u = 0; - b = 0x00; - fdt_indicator = FALSE; - for(;;) { - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { - volatile uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR; - (void)b; - } - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - if(i > respLen) { - b = 0x00; - u++; - } else { - b = resp[i]; - i++; - } - AT91C_BASE_SSC->SSC_THR = b; - - if(u > 4) { - break; - } - } - if(BUTTON_PRESS()) { - break; - } - } - - } + if (p_response != NULL) { + EmSendCmd14443aRaw(p_response->modulation, p_response->modulation_n); + // do the tracing for the previous reader request and this tag answer: + uint8_t par[MAX_PARITY_SIZE] = {0x00}; + GetParity(p_response->response, p_response->response_n, par); + + EmLogTrace(Uart.output, + Uart.len, + Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, + Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, + Uart.parity, + p_response->response, + p_response->response_n, + LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_TAG, + (LastTimeProxToAirStart + p_response->ProxToAirDuration)*16 + DELAY_ARM2AIR_AS_TAG, + par); + } + } - Dbprintf("%x %x %x", happened, happened2, cmdsRecvd); + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + set_tracing(FALSE); + BigBuf_free_keep_EM(); LED_A_OFF(); + + if (MF_DBGLEVEL >= 4){ + Dbprintf("-[ Wake ups after halt [%d]", happened); + Dbprintf("-[ Messages after halt [%d]", happened2); + Dbprintf("-[ Num of received cmd [%d]", cmdsRecvd); + Dbprintf("-[ Num of moebius tries [%d]", moebius_count); + } + + cmd_send(CMD_ACK,1,0,0,0,0); } -//----------------------------------------------------------------------------- +// prepare a delayed transfer. This simply shifts ToSend[] by a number +// of bits specified in the delay parameter. +void PrepareDelayedTransfer(uint16_t delay) { + delay &= 0x07; + if (!delay) return; + + uint8_t bitmask = 0; + uint8_t bits_to_shift = 0; + uint8_t bits_shifted = 0; + uint16_t i = 0; + + for (i = 0; i < delay; ++i) + bitmask |= (0x01 << i); + + ToSend[++ToSendMax] = 0x00; + + for (i = 0; i < ToSendMax; ++i) { + bits_to_shift = ToSend[i] & bitmask; + ToSend[i] = ToSend[i] >> delay; + ToSend[i] = ToSend[i] | (bits_shifted << (8 - delay)); + bits_shifted = bits_to_shift; + } + } + + +//------------------------------------------------------------------------------------- // Transmit the command (to the tag) that was placed in ToSend[]. -//----------------------------------------------------------------------------- -static void TransmitFor14443a(const uint8_t *cmd, int len, int *samples, int *wait) -{ - int c; +// Parameter timing: +// if NULL: transfer at next possible time, taking into account +// request guard time and frame delay time +// if == 0: transfer immediately and return time of transfer +// if != 0: delay transfer until time specified +//------------------------------------------------------------------------------------- +static void TransmitFor14443a(const uint8_t *cmd, uint16_t len, uint32_t *timing) { + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD); + uint32_t ThisTransferTime = 0; - if (wait) - if(*wait < 10) - *wait = 10; + if (timing) { + if(*timing == 0) { // Measure time + *timing = (GetCountSspClk() + 8) & 0xfffffff8; + } else { + PrepareDelayedTransfer(*timing & 0x00000007); // Delay transfer (fine tuning - up to 7 MF clock ticks) + } + if(MF_DBGLEVEL >= 4 && GetCountSspClk() >= (*timing & 0xfffffff8)) Dbprintf("TransmitFor14443a: Missed timing"); + while(GetCountSspClk() < (*timing & 0xfffffff8)); // Delay transfer (multiple of 8 MF clock ticks) + LastTimeProxToAirStart = *timing; + } else { + ThisTransferTime = ((MAX(NextTransferTime, GetCountSspClk()) & 0xfffffff8) + 8); - for(c = 0; c < *wait;) { - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - AT91C_BASE_SSC->SSC_THR = 0x00; // For exact timing! - c++; - } - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { - volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR; - (void)r; - } - WDT_HIT(); - } - - c = 0; - for(;;) { - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - AT91C_BASE_SSC->SSC_THR = cmd[c]; - c++; - if(c >= len) { - break; - } - } - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { - volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR; - (void)r; - } - WDT_HIT(); - } - if (samples) *samples = (c + *wait) << 3; + while(GetCountSspClk() < ThisTransferTime); + + LastTimeProxToAirStart = ThisTransferTime; + } + + // clear TXRDY + AT91C_BASE_SSC->SSC_THR = SEC_Y; + + uint16_t c = 0; + for(;;) { + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = cmd[c]; + ++c; + if(c >= len) + break; + } + } + + NextTransferTime = MAX(NextTransferTime, LastTimeProxToAirStart + REQUEST_GUARD_TIME); } //----------------------------------------------------------------------------- -// Code a 7-bit command without parity bit -// This is especially for 0x26 and 0x52 (REQA and WUPA) +// Prepare reader command (in bits, support short frames) to send to FPGA //----------------------------------------------------------------------------- -void ShortFrameFromReader(const uint8_t bt) -{ - int j; - int last; - uint8_t b; +void CodeIso14443aBitsAsReaderPar(const uint8_t *cmd, uint16_t bits, const uint8_t *parity) { + int i, j; + int last = 0; + uint8_t b; ToSendReset(); // Start of Communication (Seq. Z) ToSend[++ToSendMax] = SEC_Z; - last = 0; - - b = bt; - for(j = 0; j < 7; j++) { - if(b & 1) { - // Sequence X - ToSend[++ToSendMax] = SEC_X; - last = 1; - } else { - if(last == 0) { + LastProxToAirDuration = 8 * (ToSendMax+1) - 6; + + size_t bytecount = nbytes(bits); + // Generate send structure for the data bits + for (i = 0; i < bytecount; i++) { + // Get the current byte to send + b = cmd[i]; + size_t bitsleft = MIN((bits-(i*8)),8); + + for (j = 0; j < bitsleft; j++) { + if (b & 1) { + // Sequence X + ToSend[++ToSendMax] = SEC_X; + LastProxToAirDuration = 8 * (ToSendMax+1) - 2; + last = 1; + } else { + if (last == 0) { // Sequence Z ToSend[++ToSendMax] = SEC_Z; + LastProxToAirDuration = 8 * (ToSendMax+1) - 6; + } else { + // Sequence Y + ToSend[++ToSendMax] = SEC_Y; + last = 0; + } } - else { - // Sequence Y - ToSend[++ToSendMax] = SEC_Y; - last = 0; + b >>= 1; + } + + // Only transmit parity bit if we transmitted a complete byte + if (j == 8 && parity != NULL) { + // Get the parity bit + if (parity[i>>3] & (0x80 >> (i&0x0007))) { + // Sequence X + ToSend[++ToSendMax] = SEC_X; + LastProxToAirDuration = 8 * (ToSendMax+1) - 2; + last = 1; + } else { + if (last == 0) { + // Sequence Z + ToSend[++ToSendMax] = SEC_Z; + LastProxToAirDuration = 8 * (ToSendMax+1) - 6; + } else { + // Sequence Y + ToSend[++ToSendMax] = SEC_Y; + last = 0; + } } } - b >>= 1; } - // End of Communication - if(last == 0) { + // End of Communication: Logic 0 followed by Sequence Y + if (last == 0) { // Sequence Z ToSend[++ToSendMax] = SEC_Z; - } - else { + LastProxToAirDuration = 8 * (ToSendMax+1) - 6; + } else { // Sequence Y ToSend[++ToSendMax] = SEC_Y; last = 0; } - // Sequence Y - ToSend[++ToSendMax] = SEC_Y; - - // Just to be sure! - ToSend[++ToSendMax] = SEC_Y; - ToSend[++ToSendMax] = SEC_Y; ToSend[++ToSendMax] = SEC_Y; - // Convert from last character reference to length - ToSendMax++; + // Convert to length of command: + ++ToSendMax; } //----------------------------------------------------------------------------- // Prepare reader command to send to FPGA -// //----------------------------------------------------------------------------- -void CodeIso14443aAsReaderPar(const uint8_t * cmd, int len, uint32_t dwParity) -{ - int i, j; - int last; - uint8_t b; - - ToSendReset(); - - // Start of Communication (Seq. Z) - ToSend[++ToSendMax] = SEC_Z; - last = 0; - - // Generate send structure for the data bits - for (i = 0; i < len; i++) { - // Get the current byte to send - b = cmd[i]; - - for (j = 0; j < 8; j++) { - if (b & 1) { - // Sequence X - ToSend[++ToSendMax] = SEC_X; - last = 1; - } else { - if (last == 0) { - // Sequence Z - ToSend[++ToSendMax] = SEC_Z; - } else { - // Sequence Y - ToSend[++ToSendMax] = SEC_Y; - last = 0; +void CodeIso14443aAsReaderPar(const uint8_t *cmd, uint16_t len, const uint8_t *parity) { + CodeIso14443aBitsAsReaderPar(cmd, len*8, parity); +} + +//----------------------------------------------------------------------------- +// Wait for commands from reader +// Stop when button is pressed (return 1) or field was gone (return 2) +// Or return 0 when command is captured +//----------------------------------------------------------------------------- +int EmGetCmd(uint8_t *received, uint16_t *len, uint8_t *parity) { + *len = 0; + + uint32_t timer = 0, vtime = 0; + int analogCnt = 0; + int analogAVG = 0; + + // Set FPGA mode to "simulated ISO 14443 tag", no modulation (listen + // only, since we are receiving, not transmitting). + // Signal field is off with the appropriate LED + LED_D_OFF(); + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_LISTEN); + + // Set ADC to read field strength + AT91C_BASE_ADC->ADC_CR = AT91C_ADC_SWRST; + AT91C_BASE_ADC->ADC_MR = + ADC_MODE_PRESCALE(63) | + ADC_MODE_STARTUP_TIME(1) | + ADC_MODE_SAMPLE_HOLD_TIME(15); + AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ADC_CHAN_HF); + // start ADC + AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START; + + // Now run a 'software UART' on the stream of incoming samples. + UartInit(received, parity); + + // Clear RXRDY: + uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR; + + for(;;) { + WDT_HIT(); + + if (BUTTON_PRESS()) return 1; + + // test if the field exists + if (AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ADC_CHAN_HF)) { + analogCnt++; + analogAVG += AT91C_BASE_ADC->ADC_CDR[ADC_CHAN_HF]; + AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START; + if (analogCnt >= 32) { + if ((MAX_ADC_HF_VOLTAGE * (analogAVG / analogCnt) >> 10) < MF_MINFIELDV) { + vtime = GetTickCount(); + if (!timer) timer = vtime; + // 50ms no field --> card to idle state + if (vtime - timer > 50) return 2; + } else + if (timer) timer = 0; + analogCnt = 0; + analogAVG = 0; + } + } + + // receive and test the miller decoding + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { + b = (uint8_t)AT91C_BASE_SSC->SSC_RHR; + if(MillerDecoding(b, 0)) { + *len = Uart.len; + return 0; + } } - } - b >>= 1; - } + } +} + +int EmSendCmd14443aRaw(uint8_t *resp, uint16_t respLen) { + uint8_t b; + uint16_t i = 0; + uint32_t ThisTransferTime; + bool correctionNeeded; + + // Modulate Manchester + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_MOD); + + // Include correction bit if necessary + if (Uart.bitCount == 7) + { + // Short tags (7 bits) don't have parity, determine the correct value from MSB + correctionNeeded = Uart.output[0] & 0x40; + } + else + { + // The parity bits are left-aligned + correctionNeeded = Uart.parity[(Uart.len-1)/8] & (0x80 >> ((Uart.len-1) & 7)); + } + // 1236, so correction bit needed + i = (correctionNeeded) ? 0 : 1; + + // clear receiving shift register and holding register + while(!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY)); + b = AT91C_BASE_SSC->SSC_RHR; (void) b; + while(!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY)); + b = AT91C_BASE_SSC->SSC_RHR; (void) b; + + // wait for the FPGA to signal fdt_indicator == 1 (the FPGA is ready to queue new data in its delay line) + for (uint8_t j = 0; j < 5; j++) { // allow timeout - better late than never + while(!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY)); + if (AT91C_BASE_SSC->SSC_RHR) break; + } + + while ((ThisTransferTime = GetCountSspClk()) & 0x00000007); + + // Clear TXRDY: + AT91C_BASE_SSC->SSC_THR = SEC_F; + + // send cycle + for(; i < respLen; ) { + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = resp[i++]; + FpgaSendQueueDelay = (uint8_t)AT91C_BASE_SSC->SSC_RHR; + } + + if(BUTTON_PRESS()) break; + } + + // Ensure that the FPGA Delay Queue is empty before we switch to TAGSIM_LISTEN again: + uint8_t fpga_queued_bits = FpgaSendQueueDelay >> 3; // twich /8 ?? >>3, + for (i = 0; i <= fpga_queued_bits/8 + 1; ) { + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = SEC_F; + FpgaSendQueueDelay = (uint8_t)AT91C_BASE_SSC->SSC_RHR; + i++; + } + } + LastTimeProxToAirStart = ThisTransferTime + (correctionNeeded ? 8 : 0); + return 0; +} + +int EmSend4bit(uint8_t resp){ + Code4bitAnswerAsTag(resp); + int res = EmSendCmd14443aRaw(ToSend, ToSendMax); + // do the tracing for the previous reader request and this tag answer: + uint8_t par[1] = {0x00}; + GetParity(&resp, 1, par); + EmLogTrace(Uart.output, + Uart.len, + Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, + Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, + Uart.parity, + &resp, + 1, + LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_TAG, + (LastTimeProxToAirStart + LastProxToAirDuration)*16 + DELAY_ARM2AIR_AS_TAG, + par); + return res; +} + +int EmSendCmdExPar(uint8_t *resp, uint16_t respLen, uint8_t *par){ + CodeIso14443aAsTagPar(resp, respLen, par); + int res = EmSendCmd14443aRaw(ToSend, ToSendMax); + // do the tracing for the previous reader request and this tag answer: + EmLogTrace(Uart.output, + Uart.len, + Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, + Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, + Uart.parity, + resp, + respLen, + LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_TAG, + (LastTimeProxToAirStart + LastProxToAirDuration)*16 + DELAY_ARM2AIR_AS_TAG, + par); + return res; +} + +int EmSendCmdEx(uint8_t *resp, uint16_t respLen){ + uint8_t par[MAX_PARITY_SIZE] = {0x00}; + GetParity(resp, respLen, par); + return EmSendCmdExPar(resp, respLen, par); +} + +int EmSendCmd(uint8_t *resp, uint16_t respLen){ + uint8_t par[MAX_PARITY_SIZE] = {0x00}; + GetParity(resp, respLen, par); + return EmSendCmdExPar(resp, respLen, par); +} + +int EmSendCmdPar(uint8_t *resp, uint16_t respLen, uint8_t *par){ + return EmSendCmdExPar(resp, respLen, par); +} + +bool EmLogTrace(uint8_t *reader_data, uint16_t reader_len, uint32_t reader_StartTime, uint32_t reader_EndTime, uint8_t *reader_Parity, + uint8_t *tag_data, uint16_t tag_len, uint32_t tag_StartTime, uint32_t tag_EndTime, uint8_t *tag_Parity) +{ + // we cannot exactly measure the end and start of a received command from reader. However we know that the delay from + // end of the received command to start of the tag's (simulated by us) answer is n*128+20 or n*128+84 resp. + // with n >= 9. The start of the tags answer can be measured and therefore the end of the received command be calculated: + uint16_t reader_modlen = reader_EndTime - reader_StartTime; + uint16_t approx_fdt = tag_StartTime - reader_EndTime; + uint16_t exact_fdt = (approx_fdt - 20 + 32)/64 * 64 + 20; + reader_EndTime = tag_StartTime - exact_fdt; + reader_StartTime = reader_EndTime - reader_modlen; + + if (!LogTrace(reader_data, reader_len, reader_StartTime, reader_EndTime, reader_Parity, TRUE)) + return FALSE; + else + return(!LogTrace(tag_data, tag_len, tag_StartTime, tag_EndTime, tag_Parity, FALSE)); - // Get the parity bit - if ((dwParity >> i) & 0x01) { - // Sequence X - ToSend[++ToSendMax] = SEC_X; - last = 1; - } else { - if (last == 0) { - // Sequence Z - ToSend[++ToSendMax] = SEC_Z; - } else { - // Sequence Y - ToSend[++ToSendMax] = SEC_Y; - last = 0; - } - } - } - - // End of Communication - if (last == 0) { - // Sequence Z - ToSend[++ToSendMax] = SEC_Z; - } else { - // Sequence Y - ToSend[++ToSendMax] = SEC_Y; - last = 0; - } - // Sequence Y - ToSend[++ToSendMax] = SEC_Y; - - // Just to be sure! - ToSend[++ToSendMax] = SEC_Y; - ToSend[++ToSendMax] = SEC_Y; - ToSend[++ToSendMax] = SEC_Y; - - // Convert from last character reference to length - ToSendMax++; } //----------------------------------------------------------------------------- // Wait a certain time for tag response // If a response is captured return TRUE -// If it takes to long return FALSE +// If it takes too long return FALSE //----------------------------------------------------------------------------- -static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, int maxLen, int *samples, int *elapsed) //uint8_t *buffer -{ - // buffer needs to be 512 bytes - int c; - +static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, uint8_t *receivedResponsePar, uint16_t offset) { + uint32_t c = 0x00; + // Set FPGA mode to "reader listen mode", no modulation (listen // only, since we are receiving, not transmitting). // Signal field is on with the appropriate LED LED_D_ON(); FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_LISTEN); - + // Now get the answer from the card - Demod.output = receivedResponse; - Demod.len = 0; - Demod.state = DEMOD_UNSYNCD; + DemodInit(receivedResponse, receivedResponsePar); - uint8_t b; - if (elapsed) *elapsed = 0; + // clear RXRDY: + uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR; - c = 0; for(;;) { WDT_HIT(); - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - AT91C_BASE_SSC->SSC_THR = 0x00; // To make use of exact timing of next command from reader!! - if (elapsed) (*elapsed)++; - } if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { - if(c < iso14a_timeout) { c++; } else { return FALSE; } b = (uint8_t)AT91C_BASE_SSC->SSC_RHR; - if(ManchesterDecoding((b>>4) & 0xf)) { - *samples = ((c - 1) << 3) + 4; - return TRUE; - } - if(ManchesterDecoding(b & 0x0f)) { - *samples = c << 3; + if(ManchesterDecoding(b, offset, 0)) { + NextTransferTime = MAX(NextTransferTime, Demod.endTime - (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/16 + FRAME_DELAY_TIME_PICC_TO_PCD); return TRUE; + } else if (c++ > iso14a_timeout && Demod.state == DEMOD_UNSYNCD) { + return FALSE; } } } } -void ReaderTransmitShort(const uint8_t* bt) -{ - int wait = 0; - int samples = 0; - - ShortFrameFromReader(*bt); +void ReaderTransmitBitsPar(uint8_t* frame, uint16_t bits, uint8_t *par, uint32_t *timing) { - // Select the card - TransmitFor14443a(ToSend, ToSendMax, &samples, &wait); - - // Store reader command in buffer - if (tracing) LogTrace(bt,1,0,GetParity(bt,1),TRUE); + CodeIso14443aBitsAsReaderPar(frame, bits, par); + // Send command to tag + TransmitFor14443a(ToSend, ToSendMax, timing); + if(trigger) LED_A_ON(); + + LogTrace(frame, nbytes(bits), (LastTimeProxToAirStart<<4) + DELAY_ARM2AIR_AS_READER, ((LastTimeProxToAirStart + LastProxToAirDuration)<<4) + DELAY_ARM2AIR_AS_READER, par, TRUE); } -void ReaderTransmitPar(uint8_t* frame, int len, uint32_t par) -{ - int wait = 0; - int samples = 0; - - // This is tied to other size changes - // uint8_t* frame_addr = ((uint8_t*)BigBuf) + 2024; - CodeIso14443aAsReaderPar(frame,len,par); - - // Select the card - TransmitFor14443a(ToSend, ToSendMax, &samples, &wait); - if(trigger) - LED_A_ON(); - - // Store reader command in buffer - if (tracing) LogTrace(frame,len,0,par,TRUE); +void ReaderTransmitPar(uint8_t* frame, uint16_t len, uint8_t *par, uint32_t *timing) { + ReaderTransmitBitsPar(frame, len*8, par, timing); } - -void ReaderTransmit(uint8_t* frame, int len) -{ - // Generate parity and redirect - ReaderTransmitPar(frame,len,GetParity(frame,len)); +void ReaderTransmitBits(uint8_t* frame, uint16_t len, uint32_t *timing) { + // Generate parity and redirect + uint8_t par[MAX_PARITY_SIZE] = {0x00}; + GetParity(frame, len/8, par); + ReaderTransmitBitsPar(frame, len, par, timing); } -int ReaderReceive(uint8_t* receivedAnswer) -{ - int samples = 0; - if (!GetIso14443aAnswerFromTag(receivedAnswer,160,&samples,0)) return FALSE; - if (tracing) LogTrace(receivedAnswer,Demod.len,samples,Demod.parityBits,FALSE); - if(samples == 0) return FALSE; - return Demod.len; +void ReaderTransmit(uint8_t* frame, uint16_t len, uint32_t *timing) { + // Generate parity and redirect + uint8_t par[MAX_PARITY_SIZE] = {0x00}; + GetParity(frame, len, par); + ReaderTransmitBitsPar(frame, len*8, par, timing); } -int ReaderReceivePar(uint8_t* receivedAnswer, uint32_t * parptr) -{ - int samples = 0; - if (!GetIso14443aAnswerFromTag(receivedAnswer,160,&samples,0)) return FALSE; - if (tracing) LogTrace(receivedAnswer,Demod.len,samples,Demod.parityBits,FALSE); - *parptr = Demod.parityBits; - if(samples == 0) return FALSE; - return Demod.len; +int ReaderReceiveOffset(uint8_t* receivedAnswer, uint16_t offset, uint8_t *parity) { + if (!GetIso14443aAnswerFromTag(receivedAnswer, parity, offset)) + return FALSE; + LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, parity, FALSE); + return Demod.len; } -/* performs iso14443a anticolision procedure - * fills the uid pointer unless NULL - * fills resp_data unless NULL */ -int iso14443a_select_card(uint8_t * uid_ptr, iso14a_card_select_t * resp_data, uint32_t * cuid_ptr) { - uint8_t wupa[] = { 0x52 }; // 0x26 - REQA 0x52 - WAKE-UP - uint8_t sel_all[] = { 0x93,0x20 }; - uint8_t sel_uid[] = { 0x93,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; - uint8_t rats[] = { 0xE0,0x80,0x00,0x00 }; // FSD=256, FSDI=8, CID=0 +int ReaderReceive(uint8_t *receivedAnswer, uint8_t *parity) { + if (!GetIso14443aAnswerFromTag(receivedAnswer, parity, 0)) + return FALSE; + LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, parity, FALSE); + return Demod.len; +} - uint8_t* resp = (((uint8_t *)BigBuf) + 3560); // was 3560 - tied to other size changes +// performs iso14443a anticollision (optional) and card select procedure +// fills the uid and cuid pointer unless NULL +// fills the card info record unless NULL +// if anticollision is false, then the UID must be provided in uid_ptr[] +// and num_cascades must be set (1: 4 Byte UID, 2: 7 Byte UID, 3: 10 Byte UID) +int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, uint32_t *cuid_ptr, bool anticollision, uint8_t num_cascades) { + uint8_t wupa[] = { ISO14443A_CMD_WUPA }; // 0x26 - ISO14443A_CMD_REQA 0x52 - ISO14443A_CMD_WUPA + uint8_t sel_all[] = { ISO14443A_CMD_ANTICOLL_OR_SELECT,0x20 }; + uint8_t sel_uid[] = { ISO14443A_CMD_ANTICOLL_OR_SELECT,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00}; + uint8_t rats[] = { ISO14443A_CMD_RATS,0x80,0x00,0x00 }; // FSD=256, FSDI=8, CID=0 + uint8_t resp[MAX_FRAME_SIZE] = {0}; // theoretically. A usual RATS will be much smaller + uint8_t resp_par[MAX_PARITY_SIZE] = {0}; + byte_t uid_resp[4] = {0}; + size_t uid_resp_len = 0; uint8_t sak = 0x04; // cascade uid int cascade_level = 0; - int len; - - // clear uid - memset(uid_ptr, 0, 8); // Broadcast for a card, WUPA (0x52) will force response from all cards in the field - ReaderTransmitShort(wupa); + ReaderTransmitBitsPar(wupa, 7, NULL, NULL); + // Receive the ATQA - if(!ReaderReceive(resp)) return 0; + if(!ReaderReceive(resp, resp_par)) return 0; + + if(p_hi14a_card) { + memcpy(p_hi14a_card->atqa, resp, 2); + p_hi14a_card->uidlen = 0; + memset(p_hi14a_card->uid,0,10); + } + + if (anticollision) { + // clear uid + if (uid_ptr) + memset(uid_ptr,0,10); + } - if(resp_data) - memcpy(resp_data->atqa, resp, 2); + // reset the PCB block number + iso14_pcb_blocknum = 0; + + // check for proprietary anticollision: + if ((resp[0] & 0x1F) == 0) return 3; // OK we will select at least at cascade 1, lets see if first byte of UID was 0x88 in // which case we need to make a cascade 2 request and select - this is a long UID // While the UID is not complete, the 3nd bit (from the right) is set in the SAK. - for(; sak & 0x04; cascade_level++) - { + for(; sak & 0x04; cascade_level++) { // SELECT_* (L1: 0x93, L2: 0x95, L3: 0x97) sel_uid[0] = sel_all[0] = 0x93 + cascade_level * 2; + if (anticollision) { // SELECT_ALL - ReaderTransmit(sel_all,sizeof(sel_all)); - if (!ReaderReceive(resp)) return 0; - if(uid_ptr) memcpy(uid_ptr + cascade_level*4, resp, 4); - - // calculate crypto UID - if(cuid_ptr) *cuid_ptr = bytes_to_num(resp, 4); - - // Construct SELECT UID command - memcpy(sel_uid+2,resp,5); - AppendCrc14443a(sel_uid,7); - ReaderTransmit(sel_uid,sizeof(sel_uid)); + ReaderTransmit(sel_all, sizeof(sel_all), NULL); + if (!ReaderReceive(resp, resp_par)) return 0; + + if (Demod.collisionPos) { // we had a collision and need to construct the UID bit by bit + memset(uid_resp, 0, 4); + uint16_t uid_resp_bits = 0; + uint16_t collision_answer_offset = 0; + // anti-collision-loop: + while (Demod.collisionPos) { + Dbprintf("Multiple tags detected. Collision after Bit %d", Demod.collisionPos); + for (uint16_t i = collision_answer_offset; i < Demod.collisionPos; i++, uid_resp_bits++) { // add valid UID bits before collision point + uint16_t UIDbit = (resp[i/8] >> (i % 8)) & 0x01; + uid_resp[uid_resp_bits / 8] |= UIDbit << (uid_resp_bits % 8); + } + uid_resp[uid_resp_bits/8] |= 1 << (uid_resp_bits % 8); // next time select the card(s) with a 1 in the collision position + uid_resp_bits++; + // construct anticollosion command: + sel_uid[1] = ((2 + uid_resp_bits/8) << 4) | (uid_resp_bits & 0x07); // length of data in bytes and bits + for (uint16_t i = 0; i <= uid_resp_bits/8; i++) { + sel_uid[2+i] = uid_resp[i]; + } + collision_answer_offset = uid_resp_bits%8; + ReaderTransmitBits(sel_uid, 16 + uid_resp_bits, NULL); + if (!ReaderReceiveOffset(resp, collision_answer_offset, resp_par)) return 0; + } + // finally, add the last bits and BCC of the UID + for (uint16_t i = collision_answer_offset; i < (Demod.len-1)*8; i++, uid_resp_bits++) { + uint16_t UIDbit = (resp[i/8] >> (i%8)) & 0x01; + uid_resp[uid_resp_bits/8] |= UIDbit << (uid_resp_bits % 8); + } - // Receive the SAK - if (!ReaderReceive(resp)) return 0; - sak = resp[0]; - } - if(resp_data) { - resp_data->sak = sak; - resp_data->ats_len = 0; + } else { // no collision, use the response to SELECT_ALL as current uid + memcpy(uid_resp, resp, 4); + } + + } else { + if (cascade_level < num_cascades - 1) { + uid_resp[0] = 0x88; + memcpy(uid_resp+1, uid_ptr+cascade_level*3, 3); + } else { + memcpy(uid_resp, uid_ptr+cascade_level*3, 4); + } + } + uid_resp_len = 4; + + // calculate crypto UID. Always use last 4 Bytes. + if(cuid_ptr) + *cuid_ptr = bytes_to_num(uid_resp, 4); + + // Construct SELECT UID command + sel_uid[1] = 0x70; // transmitting a full UID (1 Byte cmd, 1 Byte NVB, 4 Byte UID, 1 Byte BCC, 2 Bytes CRC) + memcpy(sel_uid+2, uid_resp, 4); // the UID received during anticollision, or the provided UID + sel_uid[6] = sel_uid[2] ^ sel_uid[3] ^ sel_uid[4] ^ sel_uid[5]; // calculate and add BCC + AppendCrc14443a(sel_uid, 7); // calculate and add CRC + ReaderTransmit(sel_uid, sizeof(sel_uid), NULL); + + // Receive the SAK + if (!ReaderReceive(resp, resp_par)) return 0; + + sak = resp[0]; + + // Test if more parts of the uid are coming + if ((sak & 0x04) /* && uid_resp[0] == 0x88 */) { + // Remove first byte, 0x88 is not an UID byte, it CT, see page 3 of: + // http://www.nxp.com/documents/application_note/AN10927.pdf + uid_resp[0] = uid_resp[1]; + uid_resp[1] = uid_resp[2]; + uid_resp[2] = uid_resp[3]; + uid_resp_len = 3; + } + + if(uid_ptr && anticollision) + memcpy(uid_ptr + (cascade_level*3), uid_resp, uid_resp_len); + + if(p_hi14a_card) { + memcpy(p_hi14a_card->uid + (cascade_level*3), uid_resp, uid_resp_len); + p_hi14a_card->uidlen += uid_resp_len; + } } - //-- this byte not UID, it CT. http://www.nxp.com/documents/application_note/AN10927.pdf page 3 - if (uid_ptr[0] == 0x88) { - memcpy(uid_ptr, uid_ptr + 1, 7); - uid_ptr[7] = 0; + + if(p_hi14a_card) { + p_hi14a_card->sak = sak; + p_hi14a_card->ats_len = 0; } - if( (sak & 0x20) == 0) - return 2; // non iso14443a compliant tag + // non iso14443a compliant tag + if( (sak & 0x20) == 0) return 2; // Request for answer to select - if(resp_data) { // JCOP cards - if reader sent RATS then there is no MIFARE session at all!!! - AppendCrc14443a(rats, 2); - ReaderTransmit(rats, sizeof(rats)); - - if (!(len = ReaderReceive(resp))) return 0; - - memcpy(resp_data->ats, resp, sizeof(resp_data->ats)); - resp_data->ats_len = len; - } + AppendCrc14443a(rats, 2); + ReaderTransmit(rats, sizeof(rats), NULL); + + if (!(len = ReaderReceive(resp, resp_par))) return 0; - return 1; + if(p_hi14a_card) { + memcpy(p_hi14a_card->ats, resp, sizeof(p_hi14a_card->ats)); + p_hi14a_card->ats_len = len; + } + + // set default timeout based on ATS + iso14a_set_ATS_timeout(resp); + return 1; } -void iso14443a_setup() { - // Setup SSC - FpgaSetupSsc(); - // Start from off (no field generated) - // Signal field is off with the appropriate LED - LED_D_OFF(); - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelay(200); +void iso14443a_setup(uint8_t fpga_minor_mode) { + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); + // Set up the synchronous serial port + FpgaSetupSsc(); + // connect Demodulated Signal to ADC: SetAdcMuxFor(GPIO_MUXSEL_HIPKD); - // Now give it time to spin up. + LED_D_OFF(); // Signal field is on with the appropriate LED - LED_D_ON(); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD); - SpinDelay(200); + if (fpga_minor_mode == FPGA_HF_ISO14443A_READER_MOD || + fpga_minor_mode == FPGA_HF_ISO14443A_READER_LISTEN) + LED_D_ON(); + + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | fpga_minor_mode); - iso14a_timeout = 2048; //default + SpinDelay(20); + + // Start the timer + StartCountSspClk(); + + // Prepare the demodulation functions + DemodReset(); + UartReset(); + NextTransferTime = 2 * DELAY_ARM2AIR_AS_READER; + iso14a_set_timeout(10*106); // 20ms default } -int iso14_apdu(uint8_t * cmd, size_t cmd_len, void * data) { +int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, void *data) { + uint8_t parity[MAX_PARITY_SIZE] = {0x00}; uint8_t real_cmd[cmd_len+4]; real_cmd[0] = 0x0a; //I-Block + // put block number into the PCB + real_cmd[0] |= iso14_pcb_blocknum; real_cmd[1] = 0x00; //CID: 0 //FIXME: allow multiple selected cards memcpy(real_cmd+2, cmd, cmd_len); AppendCrc14443a(real_cmd,cmd_len+2); - ReaderTransmit(real_cmd, cmd_len+4); - size_t len = ReaderReceive(data); - if(!len) - return -1; //DATA LINK ERROR + ReaderTransmit(real_cmd, cmd_len+4, NULL); + size_t len = ReaderReceive(data, parity); + //DATA LINK ERROR + if (!len) return 0; + uint8_t *data_bytes = (uint8_t *) data; + + // if we received an I- or R(ACK)-Block with a block number equal to the + // current block number, toggle the current block number + if (len >= 4 // PCB+CID+CRC = 4 bytes + && ((data_bytes[0] & 0xC0) == 0 // I-Block + || (data_bytes[0] & 0xD0) == 0x80) // R-Block with ACK bit set to 0 + && (data_bytes[0] & 0x01) == iso14_pcb_blocknum) // equal block numbers + { + iso14_pcb_blocknum ^= 1; + } return len; } //----------------------------------------------------------------------------- // Read an ISO 14443a tag. Send out commands and store answers. -// //----------------------------------------------------------------------------- -void ReaderIso14443a(UsbCommand * c, UsbCommand * ack) -{ +void ReaderIso14443a(UsbCommand *c) { iso14a_command_t param = c->arg[0]; - uint8_t * cmd = c->d.asBytes; - size_t len = c->arg[1]; - - if(param & ISO14A_REQUEST_TRIGGER) iso14a_set_trigger(1); - - if(param & ISO14A_CONNECT) { - iso14443a_setup(); - ack->arg[0] = iso14443a_select_card(ack->d.asBytes, (iso14a_card_select_t *) (ack->d.asBytes+12), NULL); - UsbSendPacket((void *)ack, sizeof(UsbCommand)); - } - - if(param & ISO14A_SET_TIMEOUT) { - iso14a_timeout = c->arg[2]; + size_t len = c->arg[1] & 0xffff; + size_t lenbits = c->arg[1] >> 16; + uint32_t timeout = c->arg[2]; + uint8_t *cmd = c->d.asBytes; + uint32_t arg0 = 0; + byte_t buf[USB_CMD_DATA_SIZE] = {0x00}; + uint8_t par[MAX_PARITY_SIZE] = {0x00}; + + if (param & ISO14A_CONNECT) + clear_trace(); + + set_tracing(TRUE); + + if (param & ISO14A_REQUEST_TRIGGER) + iso14a_set_trigger(TRUE); + + if (param & ISO14A_CONNECT) { + iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN); + if(!(param & ISO14A_NO_SELECT)) { + iso14a_card_select_t *card = (iso14a_card_select_t*)buf; + arg0 = iso14443a_select_card(NULL,card,NULL, true, 0); + cmd_send(CMD_ACK, arg0, card->uidlen, 0, buf, sizeof(iso14a_card_select_t)); + // if it fails, the cmdhf14a.c client quites.. however this one still executes. + if ( arg0 == 0 ) return; + } } - if(param & ISO14A_SET_TIMEOUT) { - iso14a_timeout = c->arg[2]; - } + if (param & ISO14A_SET_TIMEOUT) + iso14a_set_timeout(timeout); - if(param & ISO14A_APDU) { - ack->arg[0] = iso14_apdu(cmd, len, ack->d.asBytes); - UsbSendPacket((void *)ack, sizeof(UsbCommand)); + if (param & ISO14A_APDU) { + arg0 = iso14_apdu(cmd, len, buf); + cmd_send(CMD_ACK,arg0,0,0,buf,sizeof(buf)); } - if(param & ISO14A_RAW) { - if(param & ISO14A_APPEND_CRC) { - AppendCrc14443a(cmd,len); + if (param & ISO14A_RAW) { + if (param & ISO14A_APPEND_CRC) { + if (param & ISO14A_TOPAZMODE) + AppendCrc14443b(cmd,len); + else + AppendCrc14443a(cmd,len); + len += 2; + if (lenbits) lenbits += 16; } - ReaderTransmit(cmd,len); - ack->arg[0] = ReaderReceive(ack->d.asBytes); - UsbSendPacket((void *)ack, sizeof(UsbCommand)); + if (lenbits>0) { // want to send a specific number of bits (e.g. short commands) + if (param & ISO14A_TOPAZMODE) { + int bits_to_send = lenbits; + uint16_t i = 0; + ReaderTransmitBitsPar(&cmd[i++], MIN(bits_to_send, 7), NULL, NULL); // first byte is always short (7bits) and no parity + bits_to_send -= 7; + while (bits_to_send > 0) { + ReaderTransmitBitsPar(&cmd[i++], MIN(bits_to_send, 8), NULL, NULL); // following bytes are 8 bit and no parity + bits_to_send -= 8; + } + } else { + GetParity(cmd, lenbits/8, par); + ReaderTransmitBitsPar(cmd, lenbits, par, NULL); // bytes are 8 bit with odd parity + } + } else { // want to send complete bytes only + if (param & ISO14A_TOPAZMODE) { + uint16_t i = 0; + ReaderTransmitBitsPar(&cmd[i++], 7, NULL, NULL); // first byte: 7 bits, no paritiy + while (i < len) { + ReaderTransmitBitsPar(&cmd[i++], 8, NULL, NULL); // following bytes: 8 bits, no paritiy + } + } else { + ReaderTransmit(cmd,len, NULL); // 8 bits, odd parity + } + } + arg0 = ReaderReceive(buf, par); + cmd_send(CMD_ACK,arg0,0,0,buf,sizeof(buf)); } - if(param & ISO14A_REQUEST_TRIGGER) iso14a_set_trigger(0); + if (param & ISO14A_REQUEST_TRIGGER) + iso14a_set_trigger(FALSE); - if(param & ISO14A_NO_DISCONNECT) + if (param & ISO14A_NO_DISCONNECT) return; FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + set_tracing(FALSE); LEDsoff(); } + +// Determine the distance between two nonces. +// Assume that the difference is small, but we don't know which is first. +// Therefore try in alternating directions. +int32_t dist_nt(uint32_t nt1, uint32_t nt2) { + + if (nt1 == nt2) return 0; + + uint32_t nttmp1 = nt1; + uint32_t nttmp2 = nt2; + + // 0xFFFF -- Half up and half down to find distance between nonces + for (uint16_t i = 1; i < 32768/8; i += 8) { + nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i; + nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+1; + nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+2; + nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+3; + nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+4; + nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+5; + nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+6; + nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+7; + + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -i; + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+1); + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+2); + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+3); + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+4); + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+5); + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+6); + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+7); + } + // either nt1 or nt2 are invalid nonces + return(-99999); +} + //----------------------------------------------------------------------------- -// Read an ISO 14443a tag. Send out commands and store answers. -// +// Recover several bits of the cypher stream. This implements (first stages of) +// the algorithm described in "The Dark Side of Security by Obscurity and +// Cloning MiFare Classic Rail and Building Passes, Anywhere, Anytime" +// (article by Nicolas T. Courtois, 2009) //----------------------------------------------------------------------------- -void ReaderMifare(uint32_t parameter) -{ - // Mifare AUTH - uint8_t mf_auth[] = { 0x60,0x00,0xf5,0x7b }; - uint8_t mf_nr_ar[] = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; - uint8_t* receivedAnswer = (((uint8_t *)BigBuf) + 3560); // was 3560 - tied to other size changes - traceLen = 0; - tracing = false; +void ReaderMifare(bool first_try, uint8_t block, uint8_t keytype ) { + + uint8_t mf_auth[] = { keytype, block, 0x00, 0x00 }; + uint8_t mf_nr_ar[] = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; + uint8_t uid[10] = {0,0,0,0,0,0,0,0,0,0}; + uint8_t par_list[8] = {0,0,0,0,0,0,0,0}; + uint8_t ks_list[8] = {0,0,0,0,0,0,0,0}; + uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE] = {0x00}; + uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE] = {0x00}; + uint8_t par[1] = {0}; // maximum 8 Bytes to be sent here, 1 byte parity is therefore enough + byte_t nt_diff = 0; + uint32_t nt = 0; + uint32_t previous_nt = 0; + uint32_t cuid = 0; + + int32_t catch_up_cycles = 0; + int32_t last_catch_up = 0; + int32_t isOK = 0; + int32_t nt_distance = 0; + + uint16_t elapsed_prng_sequences = 1; + uint16_t consecutive_resyncs = 0; + uint16_t unexpected_random = 0; + uint16_t sync_tries = 0; + + // static variables here, is re-used in the next call + static uint32_t nt_attacked = 0; + static uint32_t sync_time = 0; + static uint32_t sync_cycles = 0; + static uint8_t par_low = 0; + static uint8_t mf_nr_ar3 = 0; + + #define PRNG_SEQUENCE_LENGTH (1 << 16) + #define MAX_UNEXPECTED_RANDOM 4 // maximum number of unexpected (i.e. real) random numbers when trying to sync. Then give up. + #define MAX_SYNC_TRIES 32 + + AppendCrc14443a(mf_auth, 2); + + BigBuf_free(); BigBuf_Clear_ext(false); + clear_trace(); + set_tracing(FALSE); + iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD); + + sync_time = GetCountSspClk() & 0xfffffff8; + sync_cycles = PRNG_SEQUENCE_LENGTH; // Mifare Classic's random generator repeats every 2^16 cycles (and so do the nonces). + nt_attacked = 0; + + if (MF_DBGLEVEL >= 4) Dbprintf("Mifare::Sync %u", sync_time); + + if (first_try) { + mf_nr_ar3 = 0; + par_low = 0; + } else { + // we were unsuccessful on a previous call. + // Try another READER nonce (first 3 parity bits remain the same) + ++mf_nr_ar3; + mf_nr_ar[3] = mf_nr_ar3; + par[0] = par_low; + } - iso14443a_setup(); + bool have_uid = FALSE; + uint8_t cascade_levels = 0; - LED_A_ON(); - LED_B_OFF(); - LED_C_OFF(); + LED_C_ON(); + uint16_t i; + for(i = 0; TRUE; ++i) { - byte_t nt_diff = 0; - LED_A_OFF(); - byte_t par = 0; - byte_t par_mask = 0xff; - byte_t par_low = 0; - int led_on = TRUE; - uint8_t uid[7]; - uint32_t cuid; - - tracing = FALSE; - byte_t nt[4] = {0,0,0,0}; - byte_t nt_attacked[4]; - byte_t par_list[8] = {0,0,0,0,0,0,0,0}; - byte_t ks_list[8] = {0,0,0,0,0,0,0,0}; - num_to_bytes(parameter, 4, nt_attacked); - int isOK = 0; - - while(TRUE) - { - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelay(200); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD); + WDT_HIT(); // Test if the action was cancelled if(BUTTON_PRESS()) { + isOK = -1; break; } + + // this part is from Piwi's faster nonce collecting part in Hardnested. + if (!have_uid) { // need a full select cycle to get the uid first + iso14a_card_select_t card_info; + if(!iso14443a_select_card(uid, &card_info, &cuid, true, 0)) { + if (MF_DBGLEVEL >= 4) Dbprintf("Mifare: Can't select card (ALL)"); + break; + } + switch (card_info.uidlen) { + case 4 : cascade_levels = 1; break; + case 7 : cascade_levels = 2; break; + case 10: cascade_levels = 3; break; + default: break; + } + have_uid = TRUE; + } else { // no need for anticollision. We can directly select the card + if(!iso14443a_select_card(uid, NULL, &cuid, false, cascade_levels)) { + if (MF_DBGLEVEL >= 4) Dbprintf("Mifare: Can't select card (UID)"); + continue; + } + } + + // Sending timeslot of ISO14443a frame + sync_time = (sync_time & 0xfffffff8 ) + sync_cycles + catch_up_cycles; + catch_up_cycles = 0; + + // if we missed the sync time already, advance to the next nonce repeat + while( GetCountSspClk() > sync_time) { + ++elapsed_prng_sequences; + sync_time = (sync_time & 0xfffffff8 ) + sync_cycles; + } + + // Transmit MIFARE_CLASSIC_AUTH at synctime. Should result in returning the same tag nonce (== nt_attacked) + ReaderTransmit(mf_auth, sizeof(mf_auth), &sync_time); + + // Receive the (4 Byte) "random" nonce from TAG + if (!ReaderReceive(receivedAnswer, receivedAnswerPar)) + continue; + + previous_nt = nt; + nt = bytes_to_num(receivedAnswer, 4); + + // Transmit reader nonce with fake par + ReaderTransmitPar(mf_nr_ar, sizeof(mf_nr_ar), par, NULL); + + // we didn't calibrate our clock yet, + // iceman: has to be calibrated every time. + if (previous_nt && !nt_attacked) { + + nt_distance = dist_nt(previous_nt, nt); + + // if no distance between, then we are in sync. + if (nt_distance == 0) { + nt_attacked = nt; + } else { + if (nt_distance == -99999) { // invalid nonce received + ++unexpected_random; + if (unexpected_random > MAX_UNEXPECTED_RANDOM) { + isOK = -3; // Card has an unpredictable PRNG. Give up + break; + } else { + if (sync_cycles <= 0) sync_cycles += PRNG_SEQUENCE_LENGTH; + LED_B_OFF(); + continue; // continue trying... + } + } + + if (++sync_tries > MAX_SYNC_TRIES) { + isOK = -4; // Card's PRNG runs at an unexpected frequency or resets unexpectedly + break; + } + + sync_cycles = (sync_cycles - nt_distance)/elapsed_prng_sequences; + + if (sync_cycles <= 0) + sync_cycles += PRNG_SEQUENCE_LENGTH; + + if (MF_DBGLEVEL >= 4) + Dbprintf("calibrating in cycle %d. nt_distance=%d, elapsed_prng_sequences=%d, new sync_cycles: %d\n", i, nt_distance, elapsed_prng_sequences, sync_cycles); - if(!iso14443a_select_card(uid, NULL, &cuid)) continue; - - // Transmit MIFARE_CLASSIC_AUTH - ReaderTransmit(mf_auth, sizeof(mf_auth)); - - // Receive the (16 bit) "random" nonce - if (!ReaderReceive(receivedAnswer)) continue; - memcpy(nt, receivedAnswer, 4); - - // Transmit reader nonce and reader answer - ReaderTransmitPar(mf_nr_ar, sizeof(mf_nr_ar),par); - - // Receive 4 bit answer - if (ReaderReceive(receivedAnswer)) - { - if (nt_diff == 0) - { - LED_A_ON(); - memcpy(nt_attacked, nt, 4); - par_mask = 0xf8; - par_low = par & 0x07; + LED_B_OFF(); + continue; } + } + LED_B_OFF(); + + if ( (nt != nt_attacked) && nt_attacked) { // we somehow lost sync. Try to catch up again... + + catch_up_cycles = ABS(dist_nt(nt_attacked, nt)); + if (catch_up_cycles == 99999) { // invalid nonce received. Don't resync on that one. + catch_up_cycles = 0; + continue; + } + // average? + catch_up_cycles /= elapsed_prng_sequences; + + if (catch_up_cycles == last_catch_up) { + ++consecutive_resyncs; + } else { + last_catch_up = catch_up_cycles; + consecutive_resyncs = 0; + } + + if (consecutive_resyncs < 3) { + if (MF_DBGLEVEL >= 4) + Dbprintf("Lost sync in cycle %d. nt_distance=%d. Consecutive Resyncs = %d. Trying one time catch up...\n", i, catch_up_cycles, consecutive_resyncs); + } else { + sync_cycles += catch_up_cycles; + + if (MF_DBGLEVEL >= 4) + Dbprintf("Lost sync in cycle %d for the fourth time consecutively (nt_distance = %d). Adjusting sync_cycles to %d.\n", i, catch_up_cycles, sync_cycles); - if (memcmp(nt, nt_attacked, 4) != 0) continue; + last_catch_up = 0; + catch_up_cycles = 0; + consecutive_resyncs = 0; + } + continue; + } + + // Receive answer. This will be a 4 Bit NACK when the 8 parity bits are OK after decoding + if (ReaderReceive(receivedAnswer, receivedAnswerPar)) { + catch_up_cycles = 8; // the PRNG is delayed by 8 cycles due to the NAC (4Bits = 0x05 encrypted) transfer + + if (nt_diff == 0) + par_low = par[0] & 0xE0; // there is no need to check all parities for other nt_diff. Parity Bits for mf_nr_ar[0..2] won't change - led_on = !led_on; - if(led_on) LED_B_ON(); else LED_B_OFF(); - par_list[nt_diff] = par; - ks_list[nt_diff] = receivedAnswer[0] ^ 0x05; + par_list[nt_diff] = SwapBits(par[0], 8); + ks_list[nt_diff] = receivedAnswer[0] ^ 0x05; // xor with NACK value to get keystream // Test if the information is complete if (nt_diff == 0x07) { @@ -1752,558 +2362,811 @@ void ReaderMifare(uint32_t parameter) } nt_diff = (nt_diff + 1) & 0x07; - mf_nr_ar[3] = nt_diff << 5; - par = par_low; + mf_nr_ar[3] = (mf_nr_ar[3] & 0x1F) | (nt_diff << 5); + par[0] = par_low; + } else { - if (nt_diff == 0) - { - par++; + // No NACK. + if (nt_diff == 0 && first_try) { + par[0]++; + if (par[0] == 0x00) { // tried all 256 possible parities without success. Card doesn't send NACK. + isOK = -2; + break; + } } else { - par = (((par >> 3) + 1) << 3) | par_low; + // Why this? + par[0] = ((par[0] & 0x1F) + 1) | par_low; } } - } + + // reset the resyncs since we got a complete transaction on right time. + consecutive_resyncs = 0; + } // end for loop - LogTrace(nt, 4, 0, GetParity(nt, 4), TRUE); - LogTrace(par_list, 8, 0, GetParity(par_list, 8), TRUE); - LogTrace(ks_list, 8, 0, GetParity(ks_list, 8), TRUE); + mf_nr_ar[3] &= 0x1F; - UsbCommand ack = {CMD_ACK, {isOK, 0, 0}}; - memcpy(ack.d.asBytes + 0, uid, 4); - memcpy(ack.d.asBytes + 4, nt, 4); - memcpy(ack.d.asBytes + 8, par_list, 8); - memcpy(ack.d.asBytes + 16, ks_list, 8); + if (MF_DBGLEVEL >= 4) Dbprintf("Number of sent auth requestes: %u", i); + + uint8_t buf[28] = {0x00}; + memset(buf, 0x00, sizeof(buf)); + num_to_bytes(cuid, 4, buf); + num_to_bytes(nt, 4, buf + 4); + memcpy(buf + 8, par_list, 8); + memcpy(buf + 16, ks_list, 8); + memcpy(buf + 24, mf_nr_ar, 4); - LED_B_ON(); - UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand)); - LED_B_OFF(); + cmd_send(CMD_ACK, isOK, 0, 0, buf, sizeof(buf) ); - // Thats it... FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LEDsoff(); - tracing = TRUE; - -// DbpString("COMMAND mifare FINISHED"); + set_tracing(FALSE); } -//----------------------------------------------------------------------------- -// Select, Authenticaate, Read an MIFARE tag. -// read block -//----------------------------------------------------------------------------- -void MifareReadBlock(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain) -{ - // params - uint8_t blockNo = arg0; - uint8_t keyType = arg1; - uint64_t ui64Key = 0; - ui64Key = bytes_to_num(datain, 6); - - // variables - byte_t isOK = 0; - byte_t dataoutbuf[16]; - uint8_t uid[7]; - uint32_t cuid; + +/** + *MIFARE 1K simulate. + * + *@param flags : + * FLAG_INTERACTIVE - In interactive mode, we are expected to finish the operation with an ACK + * FLAG_4B_UID_IN_DATA - use 4-byte UID in the data-section + * FLAG_7B_UID_IN_DATA - use 7-byte UID in the data-section + * FLAG_10B_UID_IN_DATA - use 10-byte UID in the data-section + * FLAG_UID_IN_EMUL - use 4-byte UID from emulator memory + * FLAG_NR_AR_ATTACK - collect NR_AR responses for bruteforcing later + *@param exitAfterNReads, exit simulation after n blocks have been read, 0 is inifite + */ +void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *datain) { + + // init pseudorand + fast_prand( GetTickCount() ); + + int cardSTATE = MFEMUL_NOFIELD; + int _UID_LEN = 0; // 4, 7, 10 + int vHf = 0; // in mV + int res = 0; + uint32_t selTimer = 0; + uint32_t authTimer = 0; + uint16_t len = 0; + uint8_t cardWRBL = 0; + uint8_t cardAUTHSC = 0; + uint8_t cardAUTHKEY = 0xff; // no authentication + uint32_t cuid = 0; + uint32_t ans = 0; + uint32_t cardINTREG = 0; + uint8_t cardINTBLOCK = 0; struct Crypto1State mpcs = {0, 0}; struct Crypto1State *pcs; pcs = &mpcs; - - // clear trace - traceLen = 0; -// tracing = false; - - iso14443a_setup(); - - LED_A_ON(); - LED_B_OFF(); - LED_C_OFF(); - - while (true) { - if(!iso14443a_select_card(uid, NULL, &cuid)) { - Dbprintf("Can't select card"); - break; - }; - - if(mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST)) { - Dbprintf("Auth error"); - break; - }; - - if(mifare_classic_readblock(pcs, cuid, blockNo, dataoutbuf)) { - Dbprintf("Read block error"); - break; - }; - - if(mifare_classic_halt(pcs, cuid)) { - Dbprintf("Halt error"); - break; - }; - - isOK = 1; - break; - } + uint32_t numReads = 0; // Counts numer of times reader read a block + uint8_t receivedCmd[MAX_MIFARE_FRAME_SIZE] = {0x00}; + uint8_t receivedCmd_par[MAX_MIFARE_PARITY_SIZE] = {0x00}; + uint8_t response[MAX_MIFARE_FRAME_SIZE] = {0x00}; + uint8_t response_par[MAX_MIFARE_PARITY_SIZE] = {0x00}; - // ----------------------------- crypto1 destroy - crypto1_destroy(pcs); + uint8_t atqa[] = {0x04, 0x00}; // Mifare classic 1k + uint8_t sak_4[] = {0x0C, 0x00, 0x00}; // CL1 - 4b uid + uint8_t sak_7[] = {0x0C, 0x00, 0x00}; // CL2 - 7b uid + uint8_t sak_10[] = {0x0C, 0x00, 0x00}; // CL3 - 10b uid + // uint8_t sak[] = {0x09, 0x3f, 0xcc }; // Mifare Mini -// DbpString("READ BLOCK FINISHED"); - - // add trace trailer - uid[0] = 0xff; - uid[1] = 0xff; - uid[2] = 0xff; - uid[3] = 0xff; - LogTrace(uid, 4, 0, 0, TRUE); - - UsbCommand ack = {CMD_ACK, {isOK, 0, 0}}; - memcpy(ack.d.asBytes, dataoutbuf, 16); + uint8_t rUIDBCC1[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; + uint8_t rUIDBCC2[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; + uint8_t rUIDBCC3[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; + + // TAG Nonce - Authenticate response + uint8_t rAUTH_NT[4]; + uint32_t nonce = prand(); + num_to_bytes(nonce, 4, rAUTH_NT); - LED_B_ON(); - UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand)); - LED_B_OFF(); - - - // Thats it... - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - LEDsoff(); -// tracing = TRUE; - -} - -//----------------------------------------------------------------------------- -// Select, Authenticaate, Read an MIFARE tag. -// read sector (data = 4 x 16 bytes = 64 bytes) -//----------------------------------------------------------------------------- -void MifareReadSector(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain) -{ - // params - uint8_t sectorNo = arg0; - uint8_t keyType = arg1; - uint64_t ui64Key = 0; - ui64Key = bytes_to_num(datain, 6); - - // variables - byte_t isOK = 0; - byte_t dataoutbuf[16 * 4]; - uint8_t uid[8]; - uint32_t cuid; - struct Crypto1State mpcs = {0, 0}; - struct Crypto1State *pcs; - pcs = &mpcs; - - // clear trace - traceLen = 0; -// tracing = false; - - iso14443a_setup(); - - LED_A_ON(); - LED_B_OFF(); - LED_C_OFF(); - - while (true) { - if(!iso14443a_select_card(uid, NULL, &cuid)) { - Dbprintf("Can't select card"); - break; - }; + // uint8_t rAUTH_NT[] = {0x55, 0x41, 0x49, 0x92};// nonce from nested? why this? + uint8_t rAUTH_AT[] = {0x00, 0x00, 0x00, 0x00}; + + // Here, we collect CUID, NT, NR, AR, CUID2, NT2, NR2, AR2 + // This can be used in a reader-only attack. + nonces_t ar_nr_nonces[ATTACK_KEY_COUNT]; + memset(ar_nr_nonces, 0x00, sizeof(ar_nr_nonces)); + + // -- Determine the UID + // Can be set from emulator memory or incoming data + // Length: 4,7,or 10 bytes + if ( (flags & FLAG_UID_IN_EMUL) == FLAG_UID_IN_EMUL) + emlGetMemBt(datain, 0, 10); // load 10bytes from EMUL to the datain pointer. to be used below. + + if ( (flags & FLAG_4B_UID_IN_DATA) == FLAG_4B_UID_IN_DATA) { + memcpy(rUIDBCC1, datain, 4); + _UID_LEN = 4; + } else if ( (flags & FLAG_7B_UID_IN_DATA) == FLAG_7B_UID_IN_DATA) { + memcpy(&rUIDBCC1[1], datain, 3); + memcpy( rUIDBCC2, datain+3, 4); + _UID_LEN = 7; + } else if ( (flags & FLAG_10B_UID_IN_DATA) == FLAG_10B_UID_IN_DATA) { + memcpy(&rUIDBCC1[1], datain, 3); + memcpy(&rUIDBCC2[1], datain+3, 3); + memcpy( rUIDBCC3, datain+6, 4); + _UID_LEN = 10; + } - if(mifare_classic_auth(pcs, cuid, sectorNo * 4, keyType, ui64Key, AUTH_FIRST)) { - Dbprintf("Auth error"); - break; - }; - - if(mifare_classic_readblock(pcs, cuid, sectorNo * 4 + 0, dataoutbuf + 16 * 0)) { - Dbprintf("Read block 0 error"); - break; - }; - if(mifare_classic_readblock(pcs, cuid, sectorNo * 4 + 1, dataoutbuf + 16 * 1)) { - Dbprintf("Read block 1 error"); + switch (_UID_LEN) { + case 4: + sak_4[0] &= 0xFB; + // save CUID + cuid = bytes_to_num(rUIDBCC1, 4); + // BCC + rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3]; + if (MF_DBGLEVEL >= 2) { + Dbprintf("4B UID: %02x%02x%02x%02x", + rUIDBCC1[0], + rUIDBCC1[1], + rUIDBCC1[2], + rUIDBCC1[3] + ); + } break; - }; - if(mifare_classic_readblock(pcs, cuid, sectorNo * 4 + 2, dataoutbuf + 16 * 2)) { - Dbprintf("Read block 2 error"); + case 7: + atqa[0] |= 0x40; + sak_7[0] &= 0xFB; + // save CUID + cuid = bytes_to_num(rUIDBCC2, 4); + // CascadeTag, CT + rUIDBCC1[0] = 0x88; + // BCC + rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3]; + rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3]; + if (MF_DBGLEVEL >= 2) { + Dbprintf("7B UID: %02x %02x %02x %02x %02x %02x %02x", + rUIDBCC1[1], + rUIDBCC1[2], + rUIDBCC1[3], + rUIDBCC2[0], + rUIDBCC2[1], + rUIDBCC2[2], + rUIDBCC2[3] + ); + } break; - }; - if(mifare_classic_readblock(pcs, cuid, sectorNo * 4 + 3, dataoutbuf + 16 * 3)) { - Dbprintf("Read block 3 error"); + case 10: + atqa[0] |= 0x80; + sak_10[0] &= 0xFB; + // save CUID + cuid = bytes_to_num(rUIDBCC3, 4); + // CascadeTag, CT + rUIDBCC1[0] = 0x88; + rUIDBCC2[0] = 0x88; + // BCC + rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3]; + rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3]; + rUIDBCC3[4] = rUIDBCC3[0] ^ rUIDBCC3[1] ^ rUIDBCC3[2] ^ rUIDBCC3[3]; + + if (MF_DBGLEVEL >= 2) { + Dbprintf("10B UID: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x", + rUIDBCC1[1], + rUIDBCC1[2], + rUIDBCC1[3], + rUIDBCC2[1], + rUIDBCC2[2], + rUIDBCC2[3], + rUIDBCC3[0], + rUIDBCC3[1], + rUIDBCC3[2], + rUIDBCC3[3] + ); + } break; - }; - - if(mifare_classic_halt(pcs, cuid)) { - Dbprintf("Halt error"); + default: break; - }; - - isOK = 1; - break; } + // calc some crcs + ComputeCrc14443(CRC_14443_A, sak_4, 1, &sak_4[1], &sak_4[2]); + ComputeCrc14443(CRC_14443_A, sak_7, 1, &sak_7[1], &sak_7[2]); + ComputeCrc14443(CRC_14443_A, sak_10, 1, &sak_10[1], &sak_10[2]); - // ----------------------------- crypto1 destroy - crypto1_destroy(pcs); - -// DbpString("READ BLOCK FINISHED"); + // We need to listen to the high-frequency, peak-detected path. + iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN); - // add trace trailer - uid[0] = 0xff; - uid[1] = 0xff; - uid[2] = 0xff; - uid[3] = 0xff; - LogTrace(uid, 4, 0, 0, TRUE); + // free eventually allocated BigBuf memory but keep Emulator Memory + BigBuf_free_keep_EM(); + clear_trace(); + set_tracing(TRUE); - UsbCommand ack = {CMD_ACK, {isOK, 0, 0}}; - memcpy(ack.d.asBytes, dataoutbuf, 16 * 2); - - LED_B_ON(); - UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand)); + bool finished = FALSE; + while (!BUTTON_PRESS() && !finished && !usb_poll_validate_length()) { + WDT_HIT(); - SpinDelay(100); - - memcpy(ack.d.asBytes, dataoutbuf + 16 * 2, 16 * 2); - UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand)); - LED_B_OFF(); + // find reader field + if (cardSTATE == MFEMUL_NOFIELD) { + vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10; + if (vHf > MF_MINFIELDV) { + cardSTATE_TO_IDLE(); + LED_A_ON(); + } + } + if (cardSTATE == MFEMUL_NOFIELD) continue; + + // Now, get data + res = EmGetCmd(receivedCmd, &len, receivedCmd_par); + if (res == 2) { //Field is off! + cardSTATE = MFEMUL_NOFIELD; + LEDsoff(); + continue; + } else if (res == 1) { + break; // return value 1 means button press + } + + // REQ or WUP request in ANY state and WUP in HALTED state + // this if-statement doesn't match the specification above. (iceman) + if (len == 1 && ((receivedCmd[0] == ISO14443A_CMD_REQA && cardSTATE != MFEMUL_HALTED) || receivedCmd[0] == ISO14443A_CMD_WUPA)) { + selTimer = GetTickCount(); + EmSendCmdEx(atqa, sizeof(atqa)); + cardSTATE = MFEMUL_SELECT1; + crypto1_destroy(pcs); + cardAUTHKEY = 0xff; + LEDsoff(); + nonce = prand(); + continue; + } + + switch (cardSTATE) { + case MFEMUL_NOFIELD: + case MFEMUL_HALTED: + case MFEMUL_IDLE:{ + LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + break; + } + case MFEMUL_SELECT1:{ + if (len == 2 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT && receivedCmd[1] == 0x20)) { + if (MF_DBGLEVEL >= 4) Dbprintf("SELECT ALL received"); + EmSendCmd(rUIDBCC1, sizeof(rUIDBCC1)); + break; + } + // select card + if (len == 9 && + ( receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT && + receivedCmd[1] == 0x70 && + memcmp(&receivedCmd[2], rUIDBCC1, 4) == 0)) { + + // SAK 4b + EmSendCmd(sak_4, sizeof(sak_4)); + switch(_UID_LEN){ + case 4: + cardSTATE = MFEMUL_WORK; + LED_B_ON(); + if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol1 time: %d", GetTickCount() - selTimer); + continue; + case 7: + case 10: + cardSTATE = MFEMUL_SELECT2; + continue; + default:break; + } + } else { + cardSTATE_TO_IDLE(); + } + break; + } + case MFEMUL_SELECT2:{ + if (!len) { + LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + break; + } + if (len == 2 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2 && receivedCmd[1] == 0x20)) { + EmSendCmd(rUIDBCC2, sizeof(rUIDBCC2)); + break; + } + if (len == 9 && + (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2 && + receivedCmd[1] == 0x70 && + memcmp(&receivedCmd[2], rUIDBCC2, 4) == 0) ) { + + EmSendCmd(sak_7, sizeof(sak_7)); + switch(_UID_LEN){ + case 7: + cardSTATE = MFEMUL_WORK; + LED_B_ON(); + if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol2 time: %d", GetTickCount() - selTimer); + continue; + case 10: + cardSTATE = MFEMUL_SELECT3; + continue; + default:break; + } + } + cardSTATE_TO_IDLE(); + break; + } + case MFEMUL_SELECT3:{ + if (!len) { + LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + break; + } + if (len == 2 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_3 && receivedCmd[1] == 0x20)) { + EmSendCmd(rUIDBCC3, sizeof(rUIDBCC3)); + break; + } + if (len == 9 && + (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_3 && + receivedCmd[1] == 0x70 && + memcmp(&receivedCmd[2], rUIDBCC3, 4) == 0) ) { + + EmSendCmd(sak_10, sizeof(sak_10)); + cardSTATE = MFEMUL_WORK; + LED_B_ON(); + if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol3 time: %d", GetTickCount() - selTimer); + break; + } + cardSTATE_TO_IDLE(); + break; + } + case MFEMUL_AUTH1:{ + if( len != 8) { + cardSTATE_TO_IDLE(); + LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + break; + } - // Thats it... - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - LEDsoff(); -// tracing = TRUE; + uint32_t nr = bytes_to_num(receivedCmd, 4); + uint32_t ar = bytes_to_num(&receivedCmd[4], 4); + + // Collect AR/NR per keytype & sector + if ( (flags & FLAG_NR_AR_ATTACK) == FLAG_NR_AR_ATTACK ) { + + int8_t index = -1; + int8_t empty = -1; + for (uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) { + // find which index to use + if ( (cardAUTHSC == ar_nr_nonces[i].sector) && (cardAUTHKEY == ar_nr_nonces[i].keytype)) + index = i; + + // keep track of empty slots. + if ( ar_nr_nonces[i].state == EMPTY) + empty = i; + } + // if no empty slots. Choose first and overwrite. + if ( index == -1 ) { + if ( empty == -1 ) { + index = 0; + ar_nr_nonces[index].state = EMPTY; + } else { + index = empty; + } + } -} + switch(ar_nr_nonces[index].state) { + case EMPTY: { + // first nonce collect + ar_nr_nonces[index].cuid = cuid; + ar_nr_nonces[index].sector = cardAUTHSC; + ar_nr_nonces[index].keytype = cardAUTHKEY; + ar_nr_nonces[index].nonce = nonce; + ar_nr_nonces[index].nr = nr; + ar_nr_nonces[index].ar = ar; + ar_nr_nonces[index].state = FIRST; + break; + } + case FIRST : { + // second nonce collect + ar_nr_nonces[index].nonce2 = nonce; + ar_nr_nonces[index].nr2 = nr; + ar_nr_nonces[index].ar2 = ar; + ar_nr_nonces[index].state = SECOND; + + // send to client + cmd_send(CMD_ACK, CMD_SIMULATE_MIFARE_CARD, 0, 0, &ar_nr_nonces[index], sizeof(nonces_t)); + + ar_nr_nonces[index].state = EMPTY; + ar_nr_nonces[index].sector = 0; + ar_nr_nonces[index].keytype = 0; + break; + } + default: break; + } + } -//----------------------------------------------------------------------------- -// Select, Authenticaate, Read an MIFARE tag. -// read block -//----------------------------------------------------------------------------- -void MifareWriteBlock(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain) -{ - // params - uint8_t blockNo = arg0; - uint8_t keyType = arg1; - uint64_t ui64Key = 0; - byte_t blockdata[16]; - - ui64Key = bytes_to_num(datain, 6); - memcpy(blockdata, datain + 10, 16); - - // variables - byte_t isOK = 0; - uint8_t uid[8]; - uint32_t cuid; - struct Crypto1State mpcs = {0, 0}; - struct Crypto1State *pcs; - pcs = &mpcs; + crypto1_word(pcs, nr , 1); + uint32_t cardRr = ar ^ crypto1_word(pcs, 0, 0); + + //test if auth OK + if (cardRr != prng_successor(nonce, 64)){ + + if (MF_DBGLEVEL >= 3) { + Dbprintf("AUTH FAILED for sector %d with key %c. [nr=%08x cardRr=%08x] [nt=%08x succ=%08x]" + , cardAUTHSC + , (cardAUTHKEY == 0) ? 'A' : 'B' + , nr + , cardRr + , nonce // nt + , prng_successor(nonce, 64) + ); + } + // Shouldn't we respond anything here? + // Right now, we don't nack or anything, which causes the + // reader to do a WUPA after a while. /Martin + // -- which is the correct response. /piwi + cardSTATE_TO_IDLE(); + LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + break; + } + + ans = prng_successor(nonce, 96) ^ crypto1_word(pcs, 0, 0); + num_to_bytes(ans, 4, rAUTH_AT); + EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT)); + LED_C_ON(); + + if (MF_DBGLEVEL >= 1) { + Dbprintf("AUTH COMPLETED for sector %d with key %c. time=%d", + cardAUTHSC, + cardAUTHKEY == 0 ? 'A' : 'B', + GetTickCount() - authTimer + ); + } + cardSTATE = MFEMUL_WORK; + break; + } + case MFEMUL_WORK:{ + if (len == 0) { + LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + break; + } + bool encrypted_data = (cardAUTHKEY != 0xFF) ; - // clear trace - traceLen = 0; -// tracing = false; + if(encrypted_data) + mf_crypto1_decrypt(pcs, receivedCmd, len); + + if (len == 4 && (receivedCmd[0] == MIFARE_AUTH_KEYA || + receivedCmd[0] == MIFARE_AUTH_KEYB) ) { + + authTimer = GetTickCount(); + cardAUTHSC = receivedCmd[1] / 4; // received block -> sector + cardAUTHKEY = receivedCmd[0] & 0x1; + crypto1_destroy(pcs); + + // load key into crypto + crypto1_create(pcs, emlGetKey(cardAUTHSC, cardAUTHKEY)); + + if (!encrypted_data) { + // first authentication + // Update crypto state init (UID ^ NONCE) + crypto1_word(pcs, cuid ^ nonce, 0); + num_to_bytes(nonce, 4, rAUTH_AT); + } else { + // nested authentication + ans = nonce ^ crypto1_word(pcs, cuid ^ nonce, 0); + num_to_bytes(ans, 4, rAUTH_AT); + + if (MF_DBGLEVEL >= 3) Dbprintf("Reader doing nested authentication for block %d (0x%02x) with key %c", receivedCmd[1], receivedCmd[1], cardAUTHKEY == 0 ? 'A' : 'B'); + } - iso14443a_setup(); + EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT)); + cardSTATE = MFEMUL_AUTH1; + break; + } + + // rule 13 of 7.5.3. in ISO 14443-4. chaining shall be continued + // BUT... ACK --> NACK + if (len == 1 && receivedCmd[0] == CARD_ACK) { + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); + break; + } + + // rule 12 of 7.5.3. in ISO 14443-4. R(NAK) --> R(ACK) + if (len == 1 && receivedCmd[0] == CARD_NACK_NA) { + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK)); + break; + } + + if(len != 4) { + LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + break; + } - LED_A_ON(); - LED_B_OFF(); - LED_C_OFF(); + if ( receivedCmd[0] == ISO14443A_CMD_READBLOCK || + receivedCmd[0] == ISO14443A_CMD_WRITEBLOCK || + receivedCmd[0] == MIFARE_CMD_INC || + receivedCmd[0] == MIFARE_CMD_DEC || + receivedCmd[0] == MIFARE_CMD_RESTORE || + receivedCmd[0] == MIFARE_CMD_TRANSFER ) { + + if (receivedCmd[1] >= 16 * 4) { + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); + if (MF_DBGLEVEL >= 4) Dbprintf("Reader tried to operate (0x%02) on out of range block: %d (0x%02x), nacking",receivedCmd[0],receivedCmd[1],receivedCmd[1]); + break; + } - while (true) { - if(!iso14443a_select_card(uid, NULL, &cuid)) { - Dbprintf("Can't select card"); - break; - }; + if (receivedCmd[1] / 4 != cardAUTHSC) { + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); + if (MF_DBGLEVEL >= 4) Dbprintf("Reader tried to operate (0x%02) on block (0x%02x) not authenticated for (0x%02x), nacking",receivedCmd[0],receivedCmd[1],cardAUTHSC); + break; + } + } + // read block + if (receivedCmd[0] == ISO14443A_CMD_READBLOCK) { + if (MF_DBGLEVEL >= 4) Dbprintf("Reader reading block %d (0x%02x)", receivedCmd[1], receivedCmd[1]); + + emlGetMem(response, receivedCmd[1], 1); + AppendCrc14443a(response, 16); + mf_crypto1_encrypt(pcs, response, 18, response_par); + EmSendCmdPar(response, 18, response_par); + numReads++; + if(exitAfterNReads > 0 && numReads >= exitAfterNReads) { + Dbprintf("%d reads done, exiting", numReads); + finished = true; + } + break; + } + // write block + if (receivedCmd[0] == ISO14443A_CMD_WRITEBLOCK) { + if (MF_DBGLEVEL >= 4) Dbprintf("RECV 0xA0 write block %d (%02x)", receivedCmd[1], receivedCmd[1]); + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK)); + cardSTATE = MFEMUL_WRITEBL2; + cardWRBL = receivedCmd[1]; + break; + } + // increment, decrement, restore + if ( receivedCmd[0] == MIFARE_CMD_INC || + receivedCmd[0] == MIFARE_CMD_DEC || + receivedCmd[0] == MIFARE_CMD_RESTORE) { - if(mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST)) { - Dbprintf("Auth error"); - break; - }; - - if(mifare_classic_writeblock(pcs, cuid, blockNo, blockdata)) { - Dbprintf("Write block error"); - break; - }; + if (MF_DBGLEVEL >= 4) Dbprintf("RECV 0x%02x inc(0xC1)/dec(0xC0)/restore(0xC2) block %d (%02x)",receivedCmd[0], receivedCmd[1], receivedCmd[1]); - if(mifare_classic_halt(pcs, cuid)) { - Dbprintf("Halt error"); - break; - }; - - isOK = 1; - break; + if (emlCheckValBl(receivedCmd[1])) { + if (MF_DBGLEVEL >= 4) Dbprintf("Reader tried to operate on block, but emlCheckValBl failed, nacking"); + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); + break; + } + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK)); + if (receivedCmd[0] == MIFARE_CMD_INC) cardSTATE = MFEMUL_INTREG_INC; + if (receivedCmd[0] == MIFARE_CMD_DEC) cardSTATE = MFEMUL_INTREG_DEC; + if (receivedCmd[0] == MIFARE_CMD_RESTORE) cardSTATE = MFEMUL_INTREG_REST; + cardWRBL = receivedCmd[1]; + break; + } + // transfer + if (receivedCmd[0] == MIFARE_CMD_TRANSFER) { + if (MF_DBGLEVEL >= 4) Dbprintf("RECV 0x%02x transfer block %d (%02x)", receivedCmd[0], receivedCmd[1], receivedCmd[1]); + if (emlSetValBl(cardINTREG, cardINTBLOCK, receivedCmd[1])) + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); + else + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK)); + break; + } + // halt + if (receivedCmd[0] == ISO14443A_CMD_HALT && receivedCmd[1] == 0x00) { + LED_B_OFF(); + LED_C_OFF(); + cardSTATE = MFEMUL_HALTED; + if (MF_DBGLEVEL >= 4) Dbprintf("--> HALTED. Selected time: %d ms", GetTickCount() - selTimer); + LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + break; + } + // RATS + if (receivedCmd[0] == ISO14443A_CMD_RATS) { + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); + break; + } + // command not allowed + if (MF_DBGLEVEL >= 4) Dbprintf("Received command not allowed, nacking"); + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); + break; + } + case MFEMUL_WRITEBL2:{ + if (len == 18) { + mf_crypto1_decrypt(pcs, receivedCmd, len); + emlSetMem(receivedCmd, cardWRBL, 1); + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK)); + cardSTATE = MFEMUL_WORK; + } else { + cardSTATE_TO_IDLE(); + LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + } + break; + } + case MFEMUL_INTREG_INC:{ + mf_crypto1_decrypt(pcs, receivedCmd, len); + memcpy(&ans, receivedCmd, 4); + if (emlGetValBl(&cardINTREG, &cardINTBLOCK, cardWRBL)) { + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); + cardSTATE_TO_IDLE(); + break; + } + LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + cardINTREG = cardINTREG + ans; + cardSTATE = MFEMUL_WORK; + break; + } + case MFEMUL_INTREG_DEC:{ + mf_crypto1_decrypt(pcs, receivedCmd, len); + memcpy(&ans, receivedCmd, 4); + if (emlGetValBl(&cardINTREG, &cardINTBLOCK, cardWRBL)) { + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); + cardSTATE_TO_IDLE(); + break; + } + LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + cardINTREG = cardINTREG - ans; + cardSTATE = MFEMUL_WORK; + break; + } + case MFEMUL_INTREG_REST:{ + mf_crypto1_decrypt(pcs, receivedCmd, len); + memcpy(&ans, receivedCmd, 4); + if (emlGetValBl(&cardINTREG, &cardINTBLOCK, cardWRBL)) { + EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); + cardSTATE_TO_IDLE(); + break; + } + LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + cardSTATE = MFEMUL_WORK; + break; + } + } } - - // ----------------------------- crypto1 destroy - crypto1_destroy(pcs); - -// DbpString("WRITE BLOCK FINISHED"); - - // add trace trailer - uid[0] = 0xff; - uid[1] = 0xff; - uid[2] = 0xff; - uid[3] = 0xff; - LogTrace(uid, 4, 0, 0, TRUE); - UsbCommand ack = {CMD_ACK, {isOK, 0, 0}}; + if (MF_DBGLEVEL >= 1) + Dbprintf("Emulator stopped. Tracing: %d trace length: %d ", tracing, BigBuf_get_traceLen()); - LED_B_ON(); - UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand)); - LED_B_OFF(); - - - // Thats it... - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + cmd_send(CMD_ACK,1,0,0,0,0); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LEDsoff(); -// tracing = TRUE; - -} - -// Return 1 if the nonce is invalid else return 0 -int valid_nonce(uint32_t Nt, uint32_t NtEnc, uint32_t Ks1, byte_t * parity) { - return ((oddparity((Nt >> 24) & 0xFF) == ((parity[0]) ^ oddparity((NtEnc >> 24) & 0xFF) ^ BIT(Ks1,16))) & \ - (oddparity((Nt >> 16) & 0xFF) == ((parity[1]) ^ oddparity((NtEnc >> 16) & 0xFF) ^ BIT(Ks1,8))) & \ - (oddparity((Nt >> 8) & 0xFF) == ((parity[2]) ^ oddparity((NtEnc >> 8) & 0xFF) ^ BIT(Ks1,0)))) ? 1 : 0; + set_tracing(FALSE); } //----------------------------------------------------------------------------- -// MIFARE nested authentication. +// MIFARE sniffer. // +// if no activity for 2sec, it sends the collected data to the client. //----------------------------------------------------------------------------- -void MifareNested(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain) -{ - // params - uint8_t blockNo = arg0; - uint8_t keyType = arg1; - uint64_t ui64Key = 0; - - ui64Key = bytes_to_num(datain, 6); - - // variables - uint8_t targetBlockNo = blockNo + 1; - int rtr, i, m, len; - int davg, dmin, dmax; - uint8_t uid[8]; - uint32_t cuid, nt1, nt2, nttmp, nttest, par, ks1; - uint8_t par_array[4]; - nestedVector nvector[3][10]; - int nvectorcount[3] = {10, 10, 10}; - int ncount = 0; - struct Crypto1State mpcs = {0, 0}; - struct Crypto1State *pcs; - pcs = &mpcs; - uint8_t* receivedAnswer = mifare_get_bigbufptr(); - - // clear trace - traceLen = 0; - tracing = false; +// "hf mf sniff" +void RAMFUNC SniffMifare(uint8_t param) { - iso14443a_setup(); + LEDsoff(); - LED_A_ON(); - LED_B_ON(); - LED_C_OFF(); + // free eventually allocated BigBuf memory + BigBuf_free(); BigBuf_Clear_ext(false); + clear_trace(); + set_tracing(TRUE); + + // The command (reader -> tag) that we're receiving. + uint8_t receivedCmd[MAX_MIFARE_FRAME_SIZE] = {0x00}; + uint8_t receivedCmdPar[MAX_MIFARE_PARITY_SIZE] = {0x00}; + + // The response (tag -> reader) that we're receiving. + uint8_t receivedResponse[MAX_MIFARE_FRAME_SIZE] = {0x00}; + uint8_t receivedResponsePar[MAX_MIFARE_PARITY_SIZE] = {0x00}; + + iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER); + + // allocate the DMA buffer, used to stream samples from the FPGA + // [iceman] is this sniffed data unsigned? + uint8_t *dmaBuf = BigBuf_malloc(DMA_BUFFER_SIZE); + uint8_t *data = dmaBuf; + uint8_t previous_data = 0; + int maxDataLen = 0; + int dataLen = 0; + bool ReaderIsActive = FALSE; + bool TagIsActive = FALSE; + + // Set up the demodulator for tag -> reader responses. + DemodInit(receivedResponse, receivedResponsePar); + + // Set up the demodulator for the reader -> tag commands + UartInit(receivedCmd, receivedCmdPar); + + // Setup and start DMA. + // set transfer address and number of bytes. Start transfer. + if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, DMA_BUFFER_SIZE) ){ + if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting"); + return; + } - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelay(200); - - davg = dmax = 0; - dmin = 2000; + LED_D_OFF(); - // test nonce distance - for (rtr = 0; rtr < 10; rtr++) { - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelay(100); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD); + MfSniffInit(); - // Test if the action was cancelled - if(BUTTON_PRESS()) { - break; - } + // And now we loop, receiving samples. + for(uint32_t sniffCounter = 0;; ) { - if(!iso14443a_select_card(uid, NULL, &cuid)) { - Dbprintf("Can't select card"); - break; - }; - - if(mifare_classic_authex(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST, &nt1)) { - Dbprintf("Auth1 error"); - break; - }; - - if(mifare_classic_authex(pcs, cuid, blockNo, keyType, ui64Key, AUTH_NESTED, &nt2)) { - Dbprintf("Auth2 error"); + LED_A_ON(); + WDT_HIT(); + + if(BUTTON_PRESS()) { + DbpString("cancelled by button"); break; - }; - - nttmp = prng_successor(nt1, 500); - for (i = 501; i < 2000; i++) { - nttmp = prng_successor(nttmp, 1); - if (nttmp == nt2) break; + } + + if ((sniffCounter & 0x0000FFFF) == 0) { // from time to time + // check if a transaction is completed (timeout after 2000ms). + // if yes, stop the DMA transfer and send what we have so far to the client + if (MfSniffSend(2000)) { + // Reset everything - we missed some sniffed data anyway while the DMA was stopped + sniffCounter = 0; + data = dmaBuf; + maxDataLen = 0; + ReaderIsActive = FALSE; + TagIsActive = FALSE; + // Setup and start DMA. set transfer address and number of bytes. Start transfer. + if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, DMA_BUFFER_SIZE) ){ + if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting"); + return; + } + } } - if (i != 2000) { - davg += i; - if (dmin > i) dmin = i; - if (dmax < i) dmax = i; -// Dbprintf("r=%d nt1=%08x nt2=%08x distance=%d", rtr, nt1, nt2, i); + int register readBufDataP = data - dmaBuf; // number of bytes we have processed so far + int register dmaBufDataP = DMA_BUFFER_SIZE - AT91C_BASE_PDC_SSC->PDC_RCR; // number of bytes already transferred + + if (readBufDataP <= dmaBufDataP) // we are processing the same block of data which is currently being transferred + dataLen = dmaBufDataP - readBufDataP; // number of bytes still to be processed + else + dataLen = DMA_BUFFER_SIZE - readBufDataP + dmaBufDataP; // number of bytes still to be processed + + // test for length of buffer + if(dataLen > maxDataLen) { // we are more behind than ever... + maxDataLen = dataLen; + if(dataLen > (9 * DMA_BUFFER_SIZE / 10)) { + Dbprintf("blew circular buffer! dataLen=0x%x", dataLen); + break; + } } - } - - if (rtr == 0) return; - - davg = davg / rtr; - Dbprintf("distance: min=%d max=%d avg=%d", dmin, dmax, davg); - - LED_B_OFF(); - - tracing = true; - - LED_C_ON(); - - // get crypted nonces for target sector - for (rtr = 0; rtr < 4; rtr++) { - Dbprintf("------------------------------"); + if(dataLen < 1) continue; - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelay(100); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD); - - // Test if the action was cancelled - if(BUTTON_PRESS()) { - break; - } - - if(!iso14443a_select_card(uid, NULL, &cuid)) { - Dbprintf("Can't select card"); - break; - }; - - if(mifare_classic_authex(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST, &nt1)) { - Dbprintf("Auth1 error"); - break; - }; + // primary buffer was stopped ( <-- we lost data! + if (!AT91C_BASE_PDC_SSC->PDC_RCR) { + AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) dmaBuf; + AT91C_BASE_PDC_SSC->PDC_RCR = DMA_BUFFER_SIZE; + Dbprintf("RxEmpty ERROR, data length:%d", dataLen); // temporary + } + // secondary buffer sets as primary, secondary buffer was stopped + if (!AT91C_BASE_PDC_SSC->PDC_RNCR) { + AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) dmaBuf; + AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE; + } - // nested authentication - len = mifare_sendcmd_shortex(pcs, AUTH_NESTED, 0x60 + (keyType & 0x01), targetBlockNo, receivedAnswer, &par); - if (len != 4) { - Dbprintf("Auth2 error len=%d", len); - break; - }; - - nt2 = bytes_to_num(receivedAnswer, 4); - Dbprintf("r=%d nt1=%08x nt2enc=%08x nt2par=%08x", rtr, nt1, nt2, par); + LED_A_OFF(); -// ----------------------- test -/* uint32_t d_nt, d_ks1, d_ks2, d_ks3, reader_challenge; - byte_t ar[4]; + if (sniffCounter & 0x01) { - ar[0] = 0x55; - ar[1] = 0x41; - ar[2] = 0x49; - ar[3] = 0x92; + // no need to try decoding tag data if the reader is sending + if(!TagIsActive) { + uint8_t readerdata = (previous_data & 0xF0) | (*data >> 4); + if(MillerDecoding(readerdata, (sniffCounter-1)*4)) { + LED_C_INV(); - crypto1_destroy(pcs); - crypto1_create(pcs, ui64Key); + if (MfSniffLogic(receivedCmd, Uart.len, Uart.parity, Uart.bitCount, TRUE)) break; - // decrypt nt with help of new key - d_nt = crypto1_word(pcs, nt2 ^ cuid, 1) ^ nt2; - - reader_challenge = d_nt;//(uint32_t)bytes_to_num(ar, 4); - d_ks1 = crypto1_word(pcs, reader_challenge, 0); - d_ks2 = crypto1_word(pcs, 0, 0); - d_ks3 = crypto1_word(pcs, 0,0); - - Dbprintf("TST: ks1=%08x nt=%08x", d_ks1, d_nt);*/ -// ----------------------- test - - // Parity validity check - for (i = 0; i < 4; i++) { - par_array[i] = (oddparity(receivedAnswer[i]) != ((par & 0x08) >> 3)); - par = par << 1; - } - - ncount = 0; - for (m = dmin - 10; m < dmax + 10; m++) { - nttest = prng_successor(nt1, m); - ks1 = nt2 ^ nttest; - -//-------------------------------------- test -/* if (nttest == d_nt){ - Dbprintf("nttest=d_nt! m=%d ks1=%08x nttest=%08x", m, ks1, nttest); - }*/ -//-------------------------------------- test - if (valid_nonce(nttest, nt2, ks1, par_array) && (ncount < 11)){ - - nvector[2][ncount].nt = nttest; - nvector[2][ncount].ks1 = ks1; - ncount++; - nvectorcount[2] = ncount; - - Dbprintf("valid m=%d ks1=%08x nttest=%08x", m, ks1, nttest); + UartInit(receivedCmd, receivedCmdPar); + DemodReset(); + } + ReaderIsActive = (Uart.state != STATE_UNSYNCD); } + + // no need to try decoding tag data if the reader is sending + if(!ReaderIsActive) { + uint8_t tagdata = (previous_data << 4) | (*data & 0x0F); + if(ManchesterDecoding(tagdata, 0, (sniffCounter-1)*4)) { + LED_C_INV(); - } - - // select vector with length less than got - m = 2; - if (nvectorcount[2] < nvectorcount[1]) m = 1; - if (nvectorcount[2] < nvectorcount[0]) m = 0; - if (m != 2) { - for (i = 0; i < nvectorcount[m]; i++) { - nvector[m][i] = nvector[2][i]; + if (MfSniffLogic(receivedResponse, Demod.len, Demod.parity, Demod.bitCount, FALSE)) break; + + DemodReset(); + UartInit(receivedCmd, receivedCmdPar); + } + TagIsActive = (Demod.state != DEMOD_UNSYNCD); } - nvectorcount[m] = nvectorcount[2]; } - - Dbprintf("vector count: 1=%d 2=%d 3=%d", nvectorcount[0], nvectorcount[1], nvectorcount[2]); - } - LED_C_OFF(); + previous_data = *data; + sniffCounter++; + data++; - - // ----------------------------- crypto1 destroy - crypto1_destroy(pcs); - - // add trace trailer - uid[0] = 0xff; - uid[1] = 0xff; - uid[2] = 0xff; - uid[3] = 0xff; - LogTrace(uid, 4, 0, 0, TRUE); + if(data == dmaBuf + DMA_BUFFER_SIZE) + data = dmaBuf; - for (i = 0; i < 2; i++) { - ncount = nvectorcount[i]; - if (ncount > 5) ncount = 5; //!!!!! needs to be 2 packets x 5 pairs (nt,ks1) - - // isEOF = 0 - UsbCommand ack = {CMD_ACK, {0, ncount, targetBlockNo}}; - memcpy(ack.d.asBytes, &cuid, 4); - for (m = 0; m < 5; m++) { - memcpy(ack.d.asBytes + 4 + m * 8 + 0, &nvector[i][m].nt, 4); - memcpy(ack.d.asBytes + 4 + m * 8 + 4, &nvector[i][m].ks1, 4); - } + } // main cycle - LED_B_ON(); - UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand)); - LED_B_OFF(); - } - - // finalize list - // isEOF = 1 - UsbCommand ack = {CMD_ACK, {1, 0, 0}}; + if (MF_DBGLEVEL >= 1) Dbprintf("maxDataLen=%x, Uart.state=%x, Uart.len=%x", maxDataLen, Uart.state, Uart.len); - LED_B_ON(); - UsbSendPacket((uint8_t *)&ack, sizeof(UsbCommand)); - LED_B_OFF(); - - DbpString("NESTED FINISHED"); - - // Thats it... + FpgaDisableSscDma(); + MfSniffEnd(); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LEDsoff(); -// tracing = TRUE; - -} - -//----------------------------------------------------------------------------- -// MIFARE 1K simulate. -// -//----------------------------------------------------------------------------- -void Mifare1ksim(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain) -{ + set_tracing(FALSE); }