X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/faabfafe3017e88766b26bfd5917d81f83a8dc52..f6e01a34931850973012854318ac25a8cf623f06:/armsrc/legicrf.c diff --git a/armsrc/legicrf.c b/armsrc/legicrf.c index 5b0cccf0..19f12a95 100644 --- a/armsrc/legicrf.c +++ b/armsrc/legicrf.c @@ -1,5 +1,6 @@ //----------------------------------------------------------------------------- // (c) 2009 Henryk Plötz +// 2016 Iceman // // This code is licensed to you under the terms of the GNU GPL, version 2 or, // at your option, any later version. See the LICENSE.txt file for the text of @@ -10,7 +11,7 @@ #include "legicrf.h" static struct legic_frame { - int bits; + uint8_t bits; uint32_t data; } current_frame; @@ -68,15 +69,11 @@ static void setup_timer(void) { */ // At TIMER_CLOCK3 (MCK/32) -//#define RWD_TIME_1 150 /* RWD_TIME_PAUSE off, 80us on = 100us */ -//#define RWD_TIME_0 90 /* RWD_TIME_PAUSE off, 40us on = 60us */ -//#define RWD_TIME_PAUSE 30 /* 20us */ - // testing calculating in (us) microseconds. #define RWD_TIME_1 120 // READER_TIME_PAUSE 20us off, 80us on = 100us 80 * 1.5 == 120ticks #define RWD_TIME_0 60 // READER_TIME_PAUSE 20us off, 40us on = 60us 40 * 1.5 == 60ticks #define RWD_TIME_PAUSE 30 // 20us == 20 * 1.5 == 30ticks */ -#define TAG_BIT_PERIOD 150 // 100us == 100 * 1.5 == 150ticks +#define TAG_BIT_PERIOD 142 // 100us == 100 * 1.5 == 150ticks #define TAG_FRAME_WAIT 495 // 330us from READER frame end to TAG frame start. 330 * 1.5 == 495 #define RWD_TIME_FUZZ 20 // rather generous 13us, since the peak detector + hysteresis fuzz quite a bit @@ -89,14 +86,12 @@ static void setup_timer(void) { #define FUZZ_EQUAL(value, target, fuzz) ((value) > ((target)-(fuzz)) && (value) < ((target)+(fuzz))) #ifndef SHORT_COIL -# define SHORT_COIL LOW(GPIO_SSC_DOUT); +# define SHORT_COIL LOW(GPIO_SSC_DOUT); #endif #ifndef OPEN_COIL # define OPEN_COIL HIGH(GPIO_SSC_DOUT); #endif -uint32_t sendFrameStop = 0; - // Pause pulse, off in 20us / 30ticks, // ONE / ZERO bit pulse, // one == 80us / 120ticks @@ -108,7 +103,7 @@ uint32_t sendFrameStop = 0; WaitTicks( (RWD_TIME_PAUSE) ); \ OPEN_COIL; \ WaitTicks((x)); \ - } while (0) + } while (0); #endif // ToDo: define a meaningful maximum size for auth_table. The bigger this is, the lower will be the available memory for traces. @@ -146,14 +141,13 @@ static void frame_clean(struct legic_frame * const f) { /* Generate Keystream */ uint32_t get_key_stream(int skip, int count) { - uint32_t key = 0; + int i; // Use int to enlarge timer tc to 32bit legic_prng_bc += prng_timer->TC_CV; // reset the prng timer. - ResetTimer(prng_timer); /* If skip == -1, forward prng time based */ if(skip == -1) { @@ -167,55 +161,41 @@ uint32_t get_key_stream(int skip, int count) { i = (count == 6) ? -1 : legic_read_count; - /* Write Time Data into LOG */ - // uint8_t *BigBuf = BigBuf_get_addr(); - // BigBuf[OFFSET_LOG+128+i] = legic_prng_count(); - // BigBuf[OFFSET_LOG+256+i*4] = (legic_prng_bc >> 0) & 0xff; - // BigBuf[OFFSET_LOG+256+i*4+1] = (legic_prng_bc >> 8) & 0xff; - // BigBuf[OFFSET_LOG+256+i*4+2] = (legic_prng_bc >>16) & 0xff; - // BigBuf[OFFSET_LOG+256+i*4+3] = (legic_prng_bc >>24) & 0xff; - // BigBuf[OFFSET_LOG+384+i] = count; + // log + //uint8_t cmdbytes[] = {bits, BYTEx(data, 0), BYTEx(data, 1), BYTEx(send, 0), BYTEx(send, 1), legic_prng_count()}; + //LogTrace(cmdbytes, sizeof(cmdbytes), starttime, GET_TICKS, NULL, TRUE); /* Generate KeyStream */ - for(i=0; iPIO_OER = GPIO_SSC_DOUT; AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; - /* Use time to crypt frame */ - if(crypt) { - legic_prng_forward(2); /* TAG_FRAME_WAIT -> shift by 2 */ - response ^= legic_prng_get_bits(bits); - } + /* TAG_FRAME_WAIT -> shift by 2 */ + legic_prng_forward(2); + response ^= legic_prng_get_bits(bits); /* Wait for the frame start */ - WaitUS( TAG_FRAME_WAIT ); + WaitTicks( TAG_FRAME_WAIT ); - uint8_t bit = 0; - for(int i = 0; i < bits; i++) { - - bit = response & 1; - response >>= 1; - - if (bit) - HIGH(GPIO_SSC_DOUT); + for (; mask < BITMASK(bits); mask <<= 1) { + if (response & mask) + OPEN_COIL else - LOW(GPIO_SSC_DOUT); - - WaitUS(100); + SHORT_COIL + WaitTicks(TAG_BIT_PERIOD); } - LOW(GPIO_SSC_DOUT); + SHORT_COIL; } /* Send a frame in reader mode, the FPGA must have been set up by @@ -225,33 +205,23 @@ void frame_sendAsReader(uint32_t data, uint8_t bits){ uint32_t starttime = GET_TICKS, send = 0; uint16_t mask = 1; - uint8_t prngstart = legic_prng_count() ; // xor lsfr onto data. send = data ^ legic_prng_get_bits(bits); for (; mask < BITMASK(bits); mask <<= 1) { - if (send & mask) { - COIL_PULSE(RWD_TIME_1); - } else { - COIL_PULSE(RWD_TIME_0); - } + if (send & mask) + COIL_PULSE(RWD_TIME_1) + else + COIL_PULSE(RWD_TIME_0) } // Final pause to mark the end of the frame COIL_PULSE(0); - sendFrameStop = GET_TICKS; - uint8_t cmdbytes[] = { - bits, - BYTEx(data, 0), - BYTEx(data, 1), - 0x00, - 0x00, - prngstart, - legic_prng_count() - }; - LogTrace(cmdbytes, sizeof(cmdbytes), starttime, sendFrameStop, NULL, TRUE); + // log + uint8_t cmdbytes[] = {bits, BYTEx(data, 0), BYTEx(data, 1), BYTEx(send, 0), BYTEx(send, 1)}; + LogTrace(cmdbytes, sizeof(cmdbytes), starttime, GET_TICKS, NULL, TRUE); } /* Receive a frame from the card in reader emulation mode, the FPGA and @@ -277,46 +247,31 @@ void frame_sendAsReader(uint32_t data, uint8_t bits){ */ static void frame_receiveAsReader(struct legic_frame * const f, uint8_t bits) { - frame_clean(f); if ( bits > 32 ) return; uint8_t i = bits, edges = 0; - uint16_t lsfr = 0; - uint32_t the_bit = 1, next_bit_at = 0, data; - - int old_level = 0, level = 0; + uint32_t the_bit = 1, next_bit_at = 0, data = 0; + uint32_t old_level = 0; + volatile uint32_t level = 0; + frame_clean(f); + AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; // calibrate the prng. - // legic_prng_forward(2); - - // precompute the cipher - uint8_t prngstart = legic_prng_count() ; - - data = lsfr = legic_prng_get_bits(bits); + data = legic_prng_get_bits(bits); //FIXED time between sending frame and now listening frame. 330us - // 387 = 0x19 0001 1001 - // 480 = 0x19 - // 500 = 0x1C 0001 1100 uint32_t starttime = GET_TICKS; - //uint16_t mywait = TAG_FRAME_WAIT - (starttime - sendFrameStop); - uint16_t mywait = 495 - (starttime - sendFrameStop); - if ( bits == 6) - WaitTicks( 495 - 9 ); - else { - //Dbprintf("WAIT %d", mywait ); - WaitTicks( mywait ); - } + // its about 9+9 ticks delay from end-send to here. + WaitTicks( 477 ); - next_bit_at = GET_TICKS + TAG_BIT_PERIOD; + next_bit_at = GET_TICKS + TAG_BIT_PERIOD; while ( i-- ){ edges = 0; - uint8_t adjust = 0; while ( GET_TICKS < next_bit_at) { level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); @@ -325,17 +280,11 @@ static void frame_receiveAsReader(struct legic_frame * const f, uint8_t bits) { ++edges; old_level = level; - - if(edges > 20 && adjust == 0) { - next_bit_at -= 15; - adjust = 1; - } } next_bit_at += TAG_BIT_PERIOD; - // We expect 42 edges == ONE - //if (edges > 20 && edges < 64) + // We expect 42 edges (ONE) if ( edges > 20 ) data ^= the_bit; @@ -346,15 +295,8 @@ static void frame_receiveAsReader(struct legic_frame * const f, uint8_t bits) { f->data = data; f->bits = bits; - uint8_t cmdbytes[] = { - bits, - BYTEx(data,0), - BYTEx(data,1), - BYTEx(data, 0) ^ BYTEx(lsfr,0), - BYTEx(data, 1) ^ BYTEx(lsfr,1), - prngstart, - legic_prng_count() - }; + // log + uint8_t cmdbytes[] = {bits, BYTEx(data, 0), BYTEx(data, 1)}; LogTrace(cmdbytes, sizeof(cmdbytes), starttime, GET_TICKS, NULL, FALSE); } @@ -363,7 +305,7 @@ static uint32_t setup_phase_reader(uint8_t iv) { // Switch on carrier and let the tag charge for 1ms HIGH(GPIO_SSC_DOUT); - WaitUS(1000); + WaitUS(5000); ResetTicks(); @@ -378,9 +320,10 @@ static uint32_t setup_phase_reader(uint8_t iv) { frame_receiveAsReader(¤t_frame, 6); - // fixed delay before sending ack. - WaitTicks(366); // 244us - legic_prng_forward(1); //240us / 100 == 2.4 iterations + // 292us (438t) - fixed delay before sending ack. + // minus log and stuff 100tick? + WaitTicks(338); + legic_prng_forward(3); // Send obsfuscated acknowledgment frame. // 0x19 = 0x18 MIM22, 0x01 LSB READCMD @@ -391,6 +334,8 @@ static uint32_t setup_phase_reader(uint8_t iv) { case 0x3D: frame_sendAsReader(0x39, 6); break; default: break; } + + legic_prng_forward(2); return current_frame.data; } @@ -406,7 +351,7 @@ static void LegicCommonInit(void) { AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; // reserve a cardmem, meaning we can use the tracelog function in bigbuff easier. - cardmem = BigBuf_malloc(LEGIC_CARD_MEMSIZE); + cardmem = BigBuf_get_EM_addr(); memset(cardmem, 0x00, LEGIC_CARD_MEMSIZE); clear_trace(); @@ -419,48 +364,41 @@ static void LegicCommonInit(void) { // Switch off carrier, make sure tag is reset static void switch_off_tag_rwd(void) { LOW(GPIO_SSC_DOUT); - WaitUS(200); + WaitUS(20); WDT_HIT(); - Dbprintf("Exit Switch_off_tag_rwd"); } // calculate crc4 for a legic READ command -// 5,8,10 address size. -static uint32_t legic4Crc(uint8_t legicCmd, uint16_t byte_index, uint8_t value, uint8_t cmd_sz) { +static uint32_t legic4Crc(uint8_t cmd, uint16_t byte_index, uint8_t value, uint8_t cmd_sz) { crc_clear(&legic_crc); - //uint32_t temp = (value << cmd_sz) | (byte_index << 1) | legicCmd; - //crc_update(&legic_crc, temp, cmd_sz + 8 ); - crc_update(&legic_crc, 1, 1); /* CMD_READ */ - crc_update(&legic_crc, byte_index, cmd_sz-1); - crc_update(&legic_crc, value, 8); + uint32_t temp = (value << cmd_sz) | (byte_index << 1) | cmd; + crc_update(&legic_crc, temp, cmd_sz + 8 ); return crc_finish(&legic_crc); } -int legic_read_byte(int byte_index, int cmd_sz) { - - // (us)| ticks - // ------------- - // 330 | 495 - // 460 | 690 - // 258 | 387 - // 244 | 366 - WaitTicks(387); - legic_prng_forward(4); // 460 / 100 = 4.6 iterations - - uint8_t byte = 0, crc = 0, calcCrc = 0; - uint32_t cmd = (byte_index << 1) | LEGIC_READ; +int legic_read_byte( uint16_t index, uint8_t cmd_sz) { + uint8_t byte, crc, calcCrc = 0; + uint32_t cmd = (index << 1) | LEGIC_READ; + + // 90ticks = 60us (should be 100us but crc calc takes time.) + //WaitTicks(330); // 330ticks prng(4) - works + WaitTicks(240); // 240ticks prng(3) - works + frame_sendAsReader(cmd, cmd_sz); frame_receiveAsReader(¤t_frame, 12); + // CRC check. byte = BYTEx(current_frame.data, 0); - calcCrc = legic4Crc(LEGIC_READ, byte_index, byte, cmd_sz); crc = BYTEx(current_frame.data, 1); + calcCrc = legic4Crc(LEGIC_READ, index, byte, cmd_sz); if( calcCrc != crc ) { Dbprintf("!!! crc mismatch: expected %x but got %x !!!", calcCrc, crc); return -1; } + + legic_prng_forward(3); return byte; } @@ -469,58 +407,55 @@ int legic_read_byte(int byte_index, int cmd_sz) { * - wait until the tag sends back an ACK ('1' bit unencrypted) * - forward the prng based on the timing */ -//int legic_write_byte(int byte, int addr, int addr_sz, int PrngCorrection) { -int legic_write_byte(uint8_t byte, uint16_t addr, uint8_t addr_sz) { - - //do not write UID, CRC at offset 0-4. - if (addr <= 4) return 0; +int legic_write_byte(uint16_t index, uint8_t byte, uint8_t addr_sz) { // crc crc_clear(&legic_crc); crc_update(&legic_crc, 0, 1); /* CMD_WRITE */ - crc_update(&legic_crc, addr, addr_sz); + crc_update(&legic_crc, index, addr_sz); crc_update(&legic_crc, byte, 8); uint32_t crc = crc_finish(&legic_crc); - - uint32_t crc2 = legic4Crc(LEGIC_WRITE, addr, byte, addr_sz+1); - if ( crc != crc2 ) + uint32_t crc2 = legic4Crc(LEGIC_WRITE, index, byte, addr_sz+1); + if ( crc != crc2 ) { Dbprintf("crc is missmatch"); - + return 1; + } // send write command uint32_t cmd = ((crc <<(addr_sz+1+8)) //CRC |(byte <<(addr_sz+1)) //Data - |(addr <<1) //Address - | LEGIC_WRITE); //CMD = Write + |(index <<1) //index + | LEGIC_WRITE); //CMD = Write uint32_t cmd_sz = addr_sz+1+8+4; //crc+data+cmd - legic_prng_forward(2); /* we wait anyways */ + legic_prng_forward(2); - WaitUS(TAG_FRAME_WAIT); + WaitTicks(330); frame_sendAsReader(cmd, cmd_sz); - - // wllm-rbnt doesnt have these + + // wait for ack AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; - // wait for ack int t, old_level = 0, edges = 0; int next_bit_at = 0; - WaitUS(TAG_FRAME_WAIT); + // ACK 3.6ms = 3600us * 1.5 = 5400ticks. + WaitTicks(5360); for( t = 0; t < 80; ++t) { edges = 0; next_bit_at += TAG_BIT_PERIOD; while(timer->TC_CV < next_bit_at) { - int level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); + volatile uint32_t level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); if(level != old_level) edges++; old_level = level; } - if(edges > 20 && edges < 60) { /* expected are 42 edges */ + /* expected are 42 edges (ONE) */ + if(edges > 20 ) { int t = timer->TC_CV; int c = t / TAG_BIT_PERIOD; @@ -530,63 +465,39 @@ int legic_write_byte(uint8_t byte, uint16_t addr, uint8_t addr_sz) { } } - ResetTimer(timer); return -1; } -int LegicRfReader(int offset, int bytes, int iv) { +int LegicRfReader(uint16_t offset, uint16_t len, uint8_t iv) { - uint16_t byte_index = 0; - uint8_t cmd_sz = 0, isOK = 1; - int card_sz = 0; - - LegicCommonInit(); - - uint32_t tag_type = setup_phase_reader(iv); + uint16_t i = 0; + uint8_t isOK = 1; + legic_card_select_t card; - switch_off_tag_rwd(); + LegicCommonInit(); - switch(tag_type) { - case 0x0d: - if ( MF_DBGLEVEL >= 2) DbpString("MIM22 card found, reading card"); - cmd_sz = 6; - card_sz = 22; - break; - case 0x1d: - if ( MF_DBGLEVEL >= 2) DbpString("MIM256 card found, reading card"); - cmd_sz = 9; - card_sz = 256; - break; - case 0x3d: - if ( MF_DBGLEVEL >= 2) DbpString("MIM1024 card found, reading card"); - cmd_sz = 11; - card_sz = 1024; - break; - default: - if ( MF_DBGLEVEL >= 1) Dbprintf("Unknown card format: %x", tag_type); - isOK = 0; - goto OUT; - break; + if ( legic_select_card_iv(&card, iv) ) { + isOK = 0; + goto OUT; } - if (bytes == -1) - bytes = card_sz; - if (bytes + offset >= card_sz) - bytes = card_sz - offset; + switch_off_tag_rwd(); + + if (len + offset >= card.cardsize) + len = card.cardsize - offset; - // Start setup and read bytes. setup_phase_reader(iv); - + LED_B_ON(); - while (byte_index < bytes) { - int r = legic_read_byte(byte_index + offset, cmd_sz); + while (i < len) { + int r = legic_read_byte(offset + i, card.cmdsize); if (r == -1 || BUTTON_PRESS()) { - if ( MF_DBGLEVEL >= 3) DbpString("operation aborted"); + if ( MF_DBGLEVEL >= 2) DbpString("operation aborted"); isOK = 0; goto OUT; } - cardmem[++byte_index] = r; + cardmem[i++] = r; WDT_HIT(); } @@ -594,186 +505,175 @@ OUT: WDT_HIT(); switch_off_tag_rwd(); LEDsoff(); - uint8_t len = (bytes & 0x3FF); - cmd_send(CMD_ACK,isOK,len,0,cardmem,len); + cmd_send(CMD_ACK, isOK, len, 0, cardmem, len); return 0; } -/*int _LegicRfWriter(int offset, int bytes, int addr_sz, uint8_t *BigBuf, int RoundBruteforceValue) { - int byte_index=0; - - LED_B_ON(); - setup_phase_reader(iv); - //legic_prng_forward(2); - while(byte_index < bytes) { - int r; - - //check if the DCF should be changed - if ( (offset == 0x05) && (bytes == 0x02) ) { - //write DCF in reverse order (addr 0x06 before 0x05) - r = legic_write_byte(BigBuf[(0x06-byte_index)], (0x06-byte_index), addr_sz, RoundBruteforceValue); - //legic_prng_forward(1); - if(r == 0) { - byte_index++; - r = legic_write_byte(BigBuf[(0x06-byte_index)], (0x06-byte_index), addr_sz, RoundBruteforceValue); - } - //legic_prng_forward(1); - } - else { - r = legic_write_byte(BigBuf[byte_index+offset], byte_index+offset, addr_sz, RoundBruteforceValue); - } - if((r != 0) || BUTTON_PRESS()) { - Dbprintf("operation aborted @ 0x%03.3x", byte_index); - switch_off_tag_rwd(); - LED_B_OFF(); - LED_C_OFF(); - return -1; - } - - WDT_HIT(); - byte_index++; - if(byte_index & 0x10) LED_C_ON(); else LED_C_OFF(); - } - LED_B_OFF(); - LED_C_OFF(); - DbpString("write successful"); - return 0; -}*/ - -void LegicRfWriter(int offset, int bytes, int iv) { +void LegicRfWriter(uint16_t offset, uint16_t len, uint8_t iv, uint8_t *data) { - int byte_index = 0, addr_sz = 0; - - LegicCommonInit(); + uint8_t isOK = 1; - if ( MF_DBGLEVEL >= 2) DbpString("setting up legic card"); + // UID not is writeable. + if ( offset <= 4 ) { + isOK = 0; + goto OUT; + } - uint32_t tag_type = setup_phase_reader(iv); + legic_card_select_t card; - switch_off_tag_rwd(); + LegicCommonInit(); - switch(tag_type) { - case 0x0d: - if(offset+bytes > 22) { - Dbprintf("Error: can not write to 0x%03.3x on MIM22", offset + bytes); - return; - } - addr_sz = 5; - if ( MF_DBGLEVEL >= 2) Dbprintf("MIM22 card found, writing 0x%02.2x - 0x%02.2x ...", offset, offset + bytes); - break; - case 0x1d: - if(offset+bytes > 0x100) { - Dbprintf("Error: can not write to 0x%03.3x on MIM256", offset + bytes); - return; - } - addr_sz = 8; - if ( MF_DBGLEVEL >= 2) Dbprintf("MIM256 card found, writing 0x%02.2x - 0x%02.2x ...", offset, offset + bytes); - break; - case 0x3d: - if(offset+bytes > 0x400) { - Dbprintf("Error: can not write to 0x%03.3x on MIM1024", offset + bytes); - return; - } - addr_sz = 10; - if ( MF_DBGLEVEL >= 2) Dbprintf("MIM1024 card found, writing 0x%03.3x - 0x%03.3x ...", offset, offset + bytes); - break; - default: - Dbprintf("No or unknown card found, aborting"); - return; + if ( legic_select_card_iv(&card, iv) ) { + isOK = 0; + goto OUT; } + + if (len + offset >= card.cardsize) + len = card.cardsize - offset; - LED_B_ON(); setup_phase_reader(iv); - int r = 0; - while(byte_index < bytes) { - //check if the DCF should be changed - if ( ((byte_index+offset) == 0x05) && (bytes >= 0x02) ) { - //write DCF in reverse order (addr 0x06 before 0x05) - r = legic_write_byte(cardmem[(0x06-byte_index)], (0x06-byte_index), addr_sz); - - // write second byte on success... - if(r == 0) { - byte_index++; - r = legic_write_byte(cardmem[(0x06-byte_index)], (0x06-byte_index), addr_sz); - } - } - else { - r = legic_write_byte(cardmem[byte_index+offset], byte_index+offset, addr_sz); - } + LED_B_ON(); + int r = 0; + // how about we write backwards instead. no need for this extra DCF check. + // index = len - cardsize + // stops uid 01234, + /* + len = 20 + offset = 5 + + index = 20+5 = 25 + if ( index > cardsize ) return -1; + + loop + write( cardmem[index], index , card.addrsize); + --index; + end loop + */ + uint16_t index = len; + while(index > 4) { + + r = legic_write_byte( index, cardmem[ index ], card.addrsize); - if ((r != 0) || BUTTON_PRESS()) { - Dbprintf("operation aborted @ 0x%03.3x", byte_index); - switch_off_tag_rwd(); - LEDsoff(); - return; + if ( r ) { + Dbprintf("operation aborted @ 0x%03.3x", index); + isOK = 0; + goto OUT; } - - WDT_HIT(); - byte_index++; + --index; + WDT_HIT(); } - LEDsoff(); - if ( MF_DBGLEVEL >= 1) DbpString("write successful"); + +OUT: + cmd_send(CMD_ACK, isOK, 0,0,0,0); + switch_off_tag_rwd(); + LEDsoff(); } -void LegicRfRawWriter(int address, int byte, int iv) { +int legic_select_card_iv(legic_card_select_t *p_card, uint8_t iv){ - int byte_index = 0, addr_sz = 0; + if ( p_card == NULL ) return 1; - LegicCommonInit(); + p_card->tagtype = setup_phase_reader(iv); - if ( MF_DBGLEVEL >= 2) DbpString("setting up legic card"); - - uint32_t tag_type = setup_phase_reader(iv); - - switch_off_tag_rwd(); - - switch(tag_type) { + switch(p_card->tagtype) { case 0x0d: - if(address > 22) { - Dbprintf("Error: can not write to 0x%03.3x on MIM22", address); - return; - } - addr_sz = 5; - if ( MF_DBGLEVEL >= 2) Dbprintf("MIM22 card found, writing at addr 0x%02.2x - value 0x%02.2x ...", address, byte); + p_card->cmdsize = 6; + p_card->addrsize = 5; + p_card->cardsize = 22; break; case 0x1d: - if(address > 0x100) { - Dbprintf("Error: can not write to 0x%03.3x on MIM256", address); - return; - } - addr_sz = 8; - if ( MF_DBGLEVEL >= 2) Dbprintf("MIM256 card found, writing at addr 0x%02.2x - value 0x%02.2x ...", address, byte); + p_card->cmdsize = 9; + p_card->addrsize = 8; + p_card->cardsize = 256; break; case 0x3d: - if(address > 0x400) { - Dbprintf("Error: can not write to 0x%03.3x on MIM1024", address); - return; - } - addr_sz = 10; - if ( MF_DBGLEVEL >= 2) Dbprintf("MIM1024 card found, writing at addr 0x%03.3x - value 0x%03.3x ...", address, byte); + p_card->cmdsize = 11; + p_card->addrsize = 10; + p_card->cardsize = 1024; break; - default: - Dbprintf("No or unknown card found, aborting"); - return; + default: + p_card->cmdsize = 0; + p_card->addrsize = 0; + p_card->cardsize = 0; + return 2; } + return 0; +} +int legic_select_card(legic_card_select_t *p_card){ + return legic_select_card_iv(p_card, 0x01); +} + +//----------------------------------------------------------------------------- +// Work with emulator memory +// +// Note: we call FpgaDownloadAndGo(FPGA_BITSTREAM_HF) here although FPGA is not +// involved in dealing with emulator memory. But if it is called later, it might +// destroy the Emulator Memory. +//----------------------------------------------------------------------------- +// arg0 = offset +// arg1 = num of bytes +void LegicEMemSet(uint32_t arg0, uint32_t arg1, uint8_t *data) { + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); + legic_emlset_mem(data, arg0, arg1); +} +// arg0 = offset +// arg1 = num of bytes +void LegicEMemGet(uint32_t arg0, uint32_t arg1) { + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); + uint8_t buf[USB_CMD_DATA_SIZE] = {0x00}; + legic_emlget_mem(buf, arg0, arg1); + LED_B_ON(); + cmd_send(CMD_ACK, arg0, arg1, 0, buf, USB_CMD_DATA_SIZE); + LED_B_OFF(); +} +void legic_emlset_mem(uint8_t *data, int offset, int numofbytes) { + cardmem = BigBuf_get_EM_addr(); + memcpy(cardmem + offset, data, numofbytes); +} +void legic_emlget_mem(uint8_t *data, int offset, int numofbytes) { + cardmem = BigBuf_get_EM_addr(); + memcpy(data, cardmem + offset, numofbytes); +} + +void LegicRfInfo(void){ + + int r; - Dbprintf("integer value: %d address: %d addr_sz: %d", byte, address, addr_sz); - LED_B_ON(); + uint8_t buf[sizeof(legic_card_select_t)] = {0x00}; + legic_card_select_t *card = (legic_card_select_t*) buf; - setup_phase_reader(iv); - - int r = legic_write_byte(byte, address, addr_sz); - - if((r != 0) || BUTTON_PRESS()) { - Dbprintf("operation aborted @ 0x%03.3x (%1d)", byte_index, r); - switch_off_tag_rwd(); - LEDsoff(); - return; + LegicCommonInit(); + + if ( legic_select_card(card) ) { + cmd_send(CMD_ACK,0,0,0,0,0); + goto OUT; } - LEDsoff(); - if ( MF_DBGLEVEL >= 1) DbpString("write successful"); + // read UID bytes + for ( uint8_t i = 0; i < sizeof(card->uid); ++i) { + r = legic_read_byte(i, card->cmdsize); + if ( r == -1 ) { + cmd_send(CMD_ACK,0,0,0,0,0); + goto OUT; + } + card->uid[i] = r & 0xFF; + } + + // MCC byte. + r = legic_read_byte(4, card->cmdsize); + uint32_t calc_mcc = CRC8Legic(card->uid, 4);; + if ( r != calc_mcc) { + cmd_send(CMD_ACK,0,0,0,0,0); + goto OUT; + } + + // OK + cmd_send(CMD_ACK, 1, 0, 0, buf, sizeof(legic_card_select_t)); + +OUT: + switch_off_tag_rwd(); + LEDsoff(); } /* Handle (whether to respond) a frame in tag mode @@ -783,26 +683,26 @@ static void frame_handle_tag(struct legic_frame const * const f) { uint8_t *BigBuf = BigBuf_get_addr(); - /* First Part of Handshake (IV) */ - if(f->bits == 7) { + /* First Part of Handshake (IV) */ + if(f->bits == 7) { + + LED_C_ON(); - LED_C_ON(); - // Reset prng timer ResetTimer(prng_timer); - - legic_prng_init(f->data); - frame_send_tag(0x3d, 6, 1); /* 0x3d^0x26 = 0x1B */ - legic_state = STATE_IV; - legic_read_count = 0; - legic_prng_bc = 0; - legic_prng_iv = f->data; - - + + legic_prng_init(f->data); + frame_send_tag(0x3d, 6); /* 0x3d^0x26 = 0x1B */ + legic_state = STATE_IV; + legic_read_count = 0; + legic_prng_bc = 0; + legic_prng_iv = f->data; + + ResetTimer(timer); WaitUS(280); - return; - } + return; + } /* 0x19==??? */ if(legic_state == STATE_IV) { @@ -836,7 +736,7 @@ static void frame_handle_tag(struct legic_frame const * const f) //Dbprintf("Data:%03.3x, key:%03.3x, addr: %03.3x, read_c:%u", f->data, key, addr, read_c); legic_prng_forward(legic_reqresp_drift); - frame_send_tag(hash | data, 12, 1); + frame_send_tag(hash | data, 12); ResetTimer(timer); legic_prng_forward(2); @@ -1082,6 +982,7 @@ void LegicRfSimulate(int phase, int frame, int reqresp) // The software UART that receives commands from the reader, and its state // variables. //----------------------------------------------------------------------------- +/* static struct { enum { STATE_UNSYNCD, @@ -1096,7 +997,7 @@ static struct { int posCnt; uint8_t *output; } Uart; - +*/ /* Receive & handle a bit coming from the reader. * * This function is called 4 times per bit (every 2 subcarrier cycles). @@ -1221,7 +1122,7 @@ static struct { // return FALSE; // } - +/* static void UartReset() { Uart.byteCntMax = 3; @@ -1231,7 +1132,7 @@ static void UartReset() { Uart.posCnt = 0; memset(Uart.output, 0x00, 3); } - +*/ // static void UartInit(uint8_t *data) { // Uart.output = data; // UartReset(); @@ -1243,7 +1144,7 @@ static void UartReset() { // tag's response, which we leave in the buffer to be demodulated on the // PC side. //============================================================================= - +/* static struct { enum { DEMOD_UNSYNCD, @@ -1262,7 +1163,7 @@ static struct { int sumI; int sumQ; } Demod; - +*/ /* * Handles reception of a bit from the tag * @@ -1277,32 +1178,8 @@ static struct { * false if we are still waiting for some more * */ - - #ifndef SUBCARRIER_DETECT_THRESHOLD - # define SUBCARRIER_DETECT_THRESHOLD 8 - #endif - // Subcarrier amplitude v = sqrt(ci^2 + cq^2), approximated here by max(abs(ci),abs(cq)) + 1/2*min(abs(ci),abs(cq))) -#ifndef CHECK_FOR_SUBCARRIER -# define CHECK_FOR_SUBCARRIER() { v = MAX(ai, aq) + MIN(halfci, halfcq); } -#endif - -// The soft decision on the bit uses an estimate of just the -// quadrant of the reference angle, not the exact angle. -// Subcarrier amplitude v = sqrt(ci^2 + cq^2), approximated here by max(abs(ci),abs(cq)) + 1/2*min(abs(ci),abs(cq))) -#define MAKE_SOFT_DECISION() { \ - if(Demod.sumI > 0) \ - v = ci; \ - else \ - v = -ci; \ - \ - if(Demod.sumQ > 0) \ - v += cq; \ - else \ - v -= cq; \ - \ - } - +/* static RAMFUNC int HandleLegicSamplesDemod(int ci, int cq) { int v = 0; @@ -1457,7 +1334,8 @@ static RAMFUNC int HandleLegicSamplesDemod(int ci, int cq) } return FALSE; } - +*/ +/* // Clear out the state of the "UART" that receives from the tag. static void DemodReset() { Demod.len = 0; @@ -1475,13 +1353,17 @@ static void DemodInit(uint8_t *data) { Demod.output = data; DemodReset(); } +*/ /* * Demodulate the samples we received from the tag, also log to tracebuffer * quiet: set to 'TRUE' to disable debug output */ + + /* #define LEGIC_DMA_BUFFER_SIZE 256 -static void GetSamplesForLegicDemod(int n, bool quiet) + + static void GetSamplesForLegicDemod(int n, bool quiet) { int max = 0; bool gotFrame = FALSE; @@ -1556,9 +1438,13 @@ static void GetSamplesForLegicDemod(int n, bool quiet) LogTrace(Demod.output, Demod.len, 0, 0, parity, FALSE); } } + +*/ + //----------------------------------------------------------------------------- // Transmit the command (to the tag) that was placed in ToSend[]. //----------------------------------------------------------------------------- +/* static void TransmitForLegic(void) { int c; @@ -1605,12 +1491,13 @@ static void TransmitForLegic(void) } LED_B_OFF(); } - +*/ //----------------------------------------------------------------------------- // Code a layer 2 command (string of octets, including CRC) into ToSend[], // so that it is ready to transmit to the tag using TransmitForLegic(). //----------------------------------------------------------------------------- +/* static void CodeLegicBitsAsReader(const uint8_t *cmd, uint8_t cmdlen, int bits) { int i, j; @@ -1642,11 +1529,12 @@ static void CodeLegicBitsAsReader(const uint8_t *cmd, uint8_t cmdlen, int bits) // Convert from last character reference to length ++ToSendMax; } - +*/ /** Convenience function to encode, transmit and trace Legic comms **/ -static void CodeAndTransmitLegicAsReader(const uint8_t *cmd, uint8_t cmdlen, int bits) +/* + static void CodeAndTransmitLegicAsReader(const uint8_t *cmd, uint8_t cmdlen, int bits) { CodeLegicBitsAsReader(cmd, cmdlen, bits); TransmitForLegic(); @@ -1656,58 +1544,9 @@ static void CodeAndTransmitLegicAsReader(const uint8_t *cmd, uint8_t cmdlen, int } } -int ice_legic_select_card() -{ - //int cmd_size=0, card_size=0; - uint8_t wakeup[] = { 0x7F }; - uint8_t getid[] = {0x19}; - - //legic_prng_init(SESSION_IV); - - // first, wake up the tag, 7bits - CodeAndTransmitLegicAsReader(wakeup, sizeof(wakeup), 7); - - GetSamplesForLegicDemod(1000, TRUE); - - //frame_receiveAsReader(¤t_frame, 6, 1); - - legic_prng_forward(1); /* we wait anyways */ - - //while(timer->TC_CV < 387) ; /* ~ 258us */ - //frame_sendAsReader(0x19, 6); - CodeAndTransmitLegicAsReader(getid, sizeof(getid), 8); - GetSamplesForLegicDemod(1000, TRUE); - - //if (Demod.len < 14) return 2; - Dbprintf("CARD TYPE: %02x LEN: %d", Demod.output[0], Demod.len); - - switch(Demod.output[0]) { - case 0x1d: - DbpString("MIM 256 card found"); - // cmd_size = 9; - // card_size = 256; - break; - case 0x3d: - DbpString("MIM 1024 card found"); - // cmd_size = 11; - // card_size = 1024; - break; - default: - return -1; - } - - // if(bytes == -1) - // bytes = card_size; - - // if(bytes + offset >= card_size) - // bytes = card_size - offset; - - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - set_tracing(FALSE); - return 1; -} - +*/ // Set up LEGIC communication +/* void ice_legic_setup() { // standard things. @@ -1736,4 +1575,5 @@ void ice_legic_setup() { // initalize prng legic_prng_init(0); -} \ No newline at end of file +} +*/ \ No newline at end of file