X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/ff7bb4ef177ba1c680dd9af5a1e30d4f7f29c65f..16a372ab75c10b0ffb3786adc4029cd1df2f6066:/armsrc/iclass.c

diff --git a/armsrc/iclass.c b/armsrc/iclass.c
index bfa4a730..4d005dbc 100644
--- a/armsrc/iclass.c
+++ b/armsrc/iclass.c
@@ -41,10 +41,12 @@
 #include "util.h"
 #include "string.h"
 #include "common.h"
+#include "cmd.h"
 // Needed for CRC in emulation mode;
 // same construction as in ISO 14443;
 // different initial value (CRC_ICLASS)
 #include "iso14443crc.h"
+#include "iso15693tools.h"
 
 static int timeout = 4096;
 
@@ -986,71 +988,32 @@ static void CodeIClassTagSOF()
 	ToSendMax++;
 }
 
-/**
- * @brief SimulateIClass simulates an iClass card.
- * @param arg0 type of simulation
- *			- 0 uses the first 8 bytes in usb data as CSN
- *			- 2 "dismantling iclass"-attack. This mode iterates through all CSN's specified
- *			in the usb data. This mode collects MAC from the reader, in order to do an offline
- *			attack on the keys. For more info, see "dismantling iclass" and proxclone.com.
- *			- Other : Uses the default CSN (031fec8af7ff12e0)
- * @param arg1 - number of CSN's contained in datain (applicable for mode 2 only)
- * @param arg2
- * @param datain
- */
-void SimulateIClass(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain)
+//-----------------------------------------------------------------------------
+// Simulate iClass Card
+// Only CSN (Card Serial Number)
+// 
+//-----------------------------------------------------------------------------
+void SimulateIClass(uint8_t arg0, uint8_t *datain)
 {
-	uint32_t simType = arg0;
-	uint32_t numberOfCSNS = arg1;
-
-	// Enable and clear the trace
-	iso14a_set_tracing(TRUE);
-	iso14a_clear_trace();
-
-	uint8_t csn_crc[] = { 0x03, 0x1f, 0xec, 0x8a, 0xf7, 0xff, 0x12, 0xe0, 0x00, 0x00 };
+	uint8_t simType = arg0;
 
-	if(simType == 0) {
-		// Use the CSN from commandline
-		memcpy(csn_crc, datain, 8);
-		doIClassSimulation(csn_crc,0);
-	}else if(simType == 1)
-	{
-		doIClassSimulation(csn_crc,0);
-	}
-	else if(simType == 2)
-	{
-		// In this mode, a number of csns are within datain. We'll simulate each one, one at a time
-		// in order to collect MAC's from the reader. This can later be used in an offlne-attack
-		// in order to obtain the keys, as in the "dismantling iclass"-paper.
-		for(int i = 0 ; i < numberOfCSNS && i*8+8 < USB_CMD_DATA_SIZE; i++)
-		{
-			// The usb data is 512 bytes, fitting 65 8-byte CSNs in there.
-
-			memcpy(csn_crc, datain+(i*8), 8);
-			doIClassSimulation(csn_crc,1);
-		}
-	}else{
-		// We may want a mode here where we hardcode the csns to use (from proxclone).
-		// That will speed things up a little, but not required just yet.
-		Dbprintf("The mode is not implemented, reserved for future use");
-	}
+  // Enable and clear the trace
+	tracing = TRUE;
+	traceLen = 0;
+  memset(trace, 0x44, TRACE_SIZE);
 
-}
-/**
- * @brief Does the actual simulation
- * @param csn - csn to use
- * @param breakAfterMacReceived if true, returns after reader MAC has been received.
- */
-void doIClassSimulation(uint8_t csn[], int breakAfterMacReceived)
-{
 	// CSN followed by two CRC bytes
 	uint8_t response2[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-	uint8_t response3[] = { 0,0,0,0,0,0,0,0,0,0};
-	memcpy(response3,csn,sizeof(response3));
+	uint8_t response3[] = { 0x03, 0x1f, 0xec, 0x8a, 0xf7, 0xff, 0x12, 0xe0, 0x00, 0x00 };
 
 	// e-Purse
 	uint8_t response4[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
 
+	if(simType == 0) {
+		// Use the CSN from commandline
+		memcpy(response3, datain, 8);
+	}
+
 	// Construct anticollision-CSN
 	rotateCSN(response3,response2);
 
@@ -1058,7 +1021,6 @@ void doIClassSimulation(uint8_t csn[], int breakAfterMacReceived)
 	ComputeCrc14443(CRC_ICLASS, response2, 8, &response2[8], &response2[9]);
 	ComputeCrc14443(CRC_ICLASS, response3, 8, &response3[8], &response3[9]);
 
-	int exitLoop = 0;
 	// Reader 0a
 	// Tag    0f
 	// Reader 0c
@@ -1092,7 +1054,7 @@ void doIClassSimulation(uint8_t csn[], int breakAfterMacReceived)
 	int resp4Len;
 
 	// + 1720..
-	uint8_t *receivedCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET);
+  uint8_t *receivedCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET);
 	memset(receivedCmd, 0x44, RECV_CMD_SIZE);
 	int len;
 
@@ -1123,7 +1085,7 @@ void doIClassSimulation(uint8_t csn[], int breakAfterMacReceived)
 	int cmdsRecvd = 0;
 
 	LED_A_ON();
-	while(!exitLoop) {
+	for(;;) {
 		LED_B_OFF();
 		if(!GetIClassCommandFromReader(receivedCmd, &len, 100)) {
 			DbpString("button press");
@@ -1159,21 +1121,24 @@ void doIClassSimulation(uint8_t csn[], int breakAfterMacReceived)
 			LED_B_ON();
 		} else if(receivedCmd[0] == 0x05) {
 			// Reader random and reader MAC!!!
+			// Lets store this ;-)
+/*
+			Dbprintf("                CSN: %02x %02x %02x %02x %02x %02x %02x %02x",
+			response3[0], response3[1], response3[2],
+			response3[3], response3[4], response3[5],
+			response3[6], response3[7]);
+*/			
+			Dbprintf("READER AUTH (len=%02d): %02x %02x %02x %02x %02x %02x %02x %02x %02x",
+			len,
+			receivedCmd[0], receivedCmd[1], receivedCmd[2],
+			receivedCmd[3], receivedCmd[4], receivedCmd[5],
+			receivedCmd[6], receivedCmd[7], receivedCmd[8]);
+
 			// Do not respond
 			// We do not know what to answer, so lets keep quit
 			resp = resp1; respLen = 0; //order = 5;
 			respdata = NULL;
 			respsize = 0;
-			if (breakAfterMacReceived){
-				// TODO, actually return this to the caller instead of just
-				// dbprintf:ing ...
-				Dbprintf("CSN: %02x %02x %02x %02x %02x %02x %02x %02x");
-				Dbprintf("RDR:  (len=%02d): %02x %02x %02x %02x %02x %02x %02x %02x %02x",len,
-						 receivedCmd[0], receivedCmd[1], receivedCmd[2],
-						receivedCmd[3], receivedCmd[4], receivedCmd[5],
-						receivedCmd[6], receivedCmd[7], receivedCmd[8]);
-				exitLoop = true;
-			}
 		} else if(receivedCmd[0] == 0x00 && len == 1) {
 			// Reader ends the session
 			resp = resp1; respLen = 0; //order = 0;
@@ -1214,6 +1179,7 @@ void doIClassSimulation(uint8_t csn[], int breakAfterMacReceived)
 				break;
 			}
 		}
+
 		memset(receivedCmd, 0x44, RECV_CMD_SIZE);
 	}
 
@@ -1458,7 +1424,7 @@ void ReaderIClass(uint8_t arg0) {
 	uint8_t* resp = (((uint8_t *)BigBuf) + 3560);	// was 3560 - tied to other size changes
 
 	// Reset trace buffer
-	memset(trace, 0x44, RECV_CMD_OFFSET);
+    	memset(trace, 0x44, RECV_CMD_OFFSET);
 	traceLen = 0;
 
 	// Setup SSC
@@ -1512,4 +1478,245 @@ void ReaderIClass(uint8_t arg0) {
 	LED_A_OFF();
 }
 
+void ReaderIClass_Replay(uint8_t arg0, uint8_t *MAC) {
+	uint8_t act_all[]     = { 0x0a };
+	uint8_t identify[]    = { 0x0c };
+	uint8_t select[]      = { 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+	uint8_t readcheck_cc[]= { 0x88, 0x02 };
+	uint8_t check[]       = { 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+	uint8_t read[]        = { 0x0c, 0x00, 0x00, 0x00 };
+	
+    uint16_t crc = 0;
+	uint8_t cardsize=0;
+	bool read_success=false;
+	uint8_t mem=0;
+	
+	static struct memory_t{
+	  int k16;
+	  int book;
+	  int k2;
+	  int lockauth;
+	  int keyaccess;
+	} memory;
+	
+	uint8_t* resp = (((uint8_t *)BigBuf) + 3560);	// was 3560 - tied to other size changes
+
+	// Reset trace buffer
+    memset(trace, 0x44, RECV_CMD_OFFSET);
+	traceLen = 0;
+
+	// Setup SSC
+	FpgaSetupSsc();
+	// Start from off (no field generated)
+	// Signal field is off with the appropriate LED
+	LED_D_OFF();
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+	SpinDelay(200);
+
+	SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
+
+	// Now give it time to spin up.
+	// Signal field is on with the appropriate LED
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
+	SpinDelay(200);
+
+	LED_A_ON();
+
+	for(int i=0;i<1;i++) {
+	
+		if(traceLen > TRACE_SIZE) {
+			DbpString("Trace full");
+			break;
+		}
+		
+		if (BUTTON_PRESS()) break;
+
+		// Send act_all
+		ReaderTransmitIClass(act_all, 1);
+		// Card present?
+		if(ReaderReceiveIClass(resp)) {
+			ReaderTransmitIClass(identify, 1);
+			if(ReaderReceiveIClass(resp) == 10) {
+				// Select card          
+				memcpy(&select[1],resp,8);
+				ReaderTransmitIClass(select, sizeof(select));
+
+				if(ReaderReceiveIClass(resp) == 10) {
+					Dbprintf("     Selected CSN: %02x %02x %02x %02x %02x %02x %02x %02x",
+					resp[0], resp[1], resp[2],
+					resp[3], resp[4], resp[5],
+					resp[6], resp[7]);
+				}
+				// Card selected
+				Dbprintf("Readcheck on Sector 2");
+				ReaderTransmitIClass(readcheck_cc, sizeof(readcheck_cc));
+				if(ReaderReceiveIClass(resp) == 8) {
+				   Dbprintf("     CC: %02x %02x %02x %02x %02x %02x %02x %02x",
+					resp[0], resp[1], resp[2],
+					resp[3], resp[4], resp[5],
+					resp[6], resp[7]);
+				}else return;
+				Dbprintf("Authenticate");
+				//for now replay captured auth (as cc not updated)
+				memcpy(check+5,MAC,4);
+				Dbprintf("     AA: %02x %02x %02x %02x",
+					check[5], check[6], check[7],check[8]);
+				ReaderTransmitIClass(check, sizeof(check));
+				if(ReaderReceiveIClass(resp) == 4) {
+				   Dbprintf("     AR: %02x %02x %02x %02x",
+					resp[0], resp[1], resp[2],resp[3]);
+				}else {
+				  Dbprintf("Error: Authentication Fail!");
+				  return;
+				}
+				Dbprintf("Dump Contents");
+				//first get configuration block
+				read_success=false;
+				read[1]=1;
+				uint8_t *blockno=&read[1];
+				crc = iclass_crc16((char *)blockno,1);
+				read[2] = crc >> 8;
+				read[3] = crc & 0xff;
+				while(!read_success){
+				      ReaderTransmitIClass(read, sizeof(read));
+				      if(ReaderReceiveIClass(resp) == 10) {
+					 read_success=true;
+					 mem=resp[5];
+					 memory.k16= (mem & 0x80);
+					 memory.book= (mem & 0x20);
+					 memory.k2= (mem & 0x8);
+					 memory.lockauth= (mem & 0x2);
+					 memory.keyaccess= (mem & 0x1);
+
+				      }
+				}
+				if (memory.k16){
+				  cardsize=255;
+				}else cardsize=32;
+				//then loop around remaining blocks
+				for(uint8_t j=0; j<cardsize; j++){
+				    read_success=false;
+				    uint8_t *blockno=&j;
+				    //crc_data[0]=j;
+				    read[1]=j;
+				    crc = iclass_crc16((char *)blockno,1);
+				    read[2] = crc >> 8;
+				    read[3] = crc & 0xff;
+				    while(!read_success){
+				      ReaderTransmitIClass(read, sizeof(read));
+				      if(ReaderReceiveIClass(resp) == 10) {
+					 read_success=true;
+				         Dbprintf("     %02x: %02x %02x %02x %02x %02x %02x %02x %02x",
+					  j, resp[0], resp[1], resp[2],
+					  resp[3], resp[4], resp[5],
+					  resp[6], resp[7]);
+				      }
+				    }
+				}
+			}
+		}
+		WDT_HIT();
+	}
+	
+	LED_A_OFF();
+}
+
+//1. Create Method to Read sectors/blocks 0,1,2 and Send to client
+void IClass_iso14443A_GetPublic(uint8_t arg0) {
+	uint8_t act_all[]     = { 0x0a };
+	uint8_t identify[]    = { 0x0c };
+	uint8_t select[]      = { 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+	uint8_t readcheck_cc[]= { 0x88, 0x02 };	
+	//uint8_t read[]        = { 0x0c, 0x00, 0x00, 0x00 };	
+	uint8_t card_data[24]={0};
+	
+	//bool read_success=false;
+	uint8_t* resp = (((uint8_t *)BigBuf) + 3560);	// was 3560 - tied to other size changes
+
+	// Reset trace buffer
+    memset(trace, 0x44, RECV_CMD_OFFSET);
+	traceLen = 0;
+
+	// Setup SSC
+	FpgaSetupSsc();
+	// Start from off (no field generated)
+	// Signal field is off with the appropriate LED
+	LED_D_OFF();
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+	SpinDelay(200);
+
+	SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
+
+	// Now give it time to spin up.
+	// Signal field is on with the appropriate LED
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
+	SpinDelay(200);
+
+	LED_A_ON();
+
+	for(int i=0;i<1;i++) {
+	
+		if(traceLen > TRACE_SIZE) {
+			DbpString("Trace full");
+			break;
+		}
+		
+		if (BUTTON_PRESS()) break;
+
+		// Send act_all
+		ReaderTransmitIClass(act_all, 1);
+		// Card present?
+		if(ReaderReceiveIClass(resp)) {
+			ReaderTransmitIClass(identify, 1);
+			if(ReaderReceiveIClass(resp) == 10) {
+				// Select card          
+				memcpy(&select[1],resp,8);
+				ReaderTransmitIClass(select, sizeof(select));
+
+				if(ReaderReceiveIClass(resp) == 10) {
+					Dbprintf("     Selected CSN: %02x %02x %02x %02x %02x %02x %02x %02x",
+					resp[0], resp[1], resp[2],
+					resp[3], resp[4], resp[5],
+					resp[6], resp[7]);
+				}
+				memcpy(card_data,resp,8);
+				// Card selected
+				Dbprintf("Readcheck on Sector 2");
+				ReaderTransmitIClass(readcheck_cc, sizeof(readcheck_cc));
+				if(ReaderReceiveIClass(resp) == 8) {
+				   Dbprintf("     CC: %02x %02x %02x %02x %02x %02x %02x %02x",
+					resp[0], resp[1], resp[2],
+					resp[3], resp[4], resp[5],
+					resp[6], resp[7]);
+				}
+				memcpy(card_data+8,resp,8);
+				//prep to read config block
+				/*  read card configuration block
+				  while(!read_success){
+				  uint8_t sector_config=0x01;
+				  memcpy(read+1,&sector_config,1);
+				  ReaderTransmitIClass(read, sizeof(read));
+				  if(ReaderReceiveIClass(resp) == 8) {
+				    Dbprintf("     CC: %02x %02x %02x %02x %02x %02x %02x %02x",
+					resp[0], resp[1], resp[2],
+					resp[3], resp[4], resp[5],
+					resp[6], resp[7]);
+					read_success=true;
+                    memcpy(card_data+16,resp,8);
+				  }
+				}*/
+			}
+		}
+		WDT_HIT();
+	}
+	//Dbprintf("DEBUG: %02x%02x%02x%02x%02x%02x%02x%02x",card_data[0],card_data[1],card_data[2],card_data[3],card_data[4],card_data[5],card_data[6],card_data[7]);
+	//Dbprintf("DEBUG: %02x%02x%02x%02x%02x%02x%02x%02x",card_data[8],card_data[9],card_data[10],card_data[11],card_data[12],card_data[13],card_data[14],card_data[15]);
+	LED_A_OFF();
+	LED_B_ON();
+	//send data back to the client
+    cmd_send(CMD_ACK,0,0,0,card_data,16);
+	LED_B_OFF();
+}
+
+//TODO: Create Write method