+[[
+THIS IS WORK IN PROGREESS, very much not finished.
+
+This library utilises other libraries under the hood, but can be used as a generic reader for 13.56MHz tags.
+]]
+
+local reader14443A = require('read14a')
+
+local function sendToDevice(command, ignoreresponse)
+ core.clearCommandBuffer()
+ local err = core.SendCommand(command:getBytes())
+ if err then
+ print(err)
+ return nil, err
+ end
+ if ignoreresponse then return nil,nil end
+
+ local response = core.WaitForResponseTimeout(cmds.CMD_ACK,TIMEOUT)
+ return response,nil
+end
+
+-------------------------------------------------------
+-- This will be moved to a separate 14443B library
+-------------------------------------------------------
+
+local function read14443B()
+ return nil, "Not implemented"
+end
+local reader14443B = {
+ read = read14443B
+}
+
+
+-------------------------------------------------------
+-- This will be moved to a separate 1593 library
+-------------------------------------------------------
+
+local function errorString15693(number)
+ local errors = {
+ 0x01 : "The command is not supported",
+ 0x02 : "The command is not recognised",
+ 0x03 : "The option is not supported.",
+ 0x0f : "Unknown error.",
+ 0x10 : "The specified block is not available (doesn’t exist).",
+ 0x11 : "The specified block is already -locked and thus cannot be locked again",
+ 0x12 : "The specified block is locked and its content cannot be changed.",
+ 0x13 : "The specified block was not successfully programmed.",
+ 0x14 : "The specified block was not successfully locked.",
+ }
+ return errors[number] or "Reserved for Future Use or Custom command error."
+end
+-------------------------------------------------------
+-- This will be moved to a separate 1593 library
+-------------------------------------------------------
+
+local function parse15693(data)
+ -- From common/iso15693tools.h :
+ --[[
+ #define ISO15_CRC_CHECK ((uint16_t)(~0xF0B8 & 0xFFFF)) // use this for checking of a correct crc
+ --]]
+ -- But that is very strange. Basically what is says is:
+ -- define ISO15_CRC_CHECK 0F47
+ -- So we can just use that directly...
+ -- The following code is based on cmdhf15.c around line 666 (NoTB!) and onwards
+ if core.iso15693_crc(data, string.len(data)) ~= 0xF47 then
+ return nil, "CRC failed"
+ else if data[1] % 2 == 1 then
+ -- Above is a poor-mans bit check:
+ -- recv[0] & ISO15_RES_ERROR //(0x01)
+ local err = "Tag returned error %i: %s"
+ err = string.format(err, data[1],errorString15693(data[1]))
+ return nil, err
+ end
+ -- Finally, let the parsing begin...
+ -- the UID is just the data in reverse... almost:
+ -- 0FC481FF70000104E001001B0301
+ -- 8877665544332211
+ -- UID = E004010070FF81C4
+ -- 1122334455667788
+ -- So, cut out the relevant part and reverse it
+ local uid = data:sub(2,9):reverse()
+ local uidStr = bin.unpack("H8", uid)
+
+ local _,manufacturer_code = bin.unpack("s",uid:sub(2,2))
+ local _,tag_size = bin.unpack(">I",data:sub(12,13))
+ local _,micref_modelcode = bin.unpack("s",data:sub(14,14))
+
+ return {
+ uid = uidStr,
+ manufacturer_code = manufacturer_code,
+ tag_size = tag_size,
+ micref_modelcode = micref_modelcode,
+ }
+end
+-------------------------------------------------------
+-- This will be moved to a separate 1593 library
+-------------------------------------------------------
+
+local function read15693()
+ [[
+
+ We start by trying this command:
+
+ proxmark3> hf 15 cmd sysinfo -2 u
+ 0F C4 81 FF 70 00 01 04 E0 01 00 1B 03 01
+ UID = E004010070FF81C4
+ Philips; IC SL2 ICS20
+ DSFID supported, set to 01
+ AFI supported, set to 000
+ Tag provides info on memory layout (vendor dependent)
+ 4 (or 3) bytes/page x 28 pages
+ IC reference given: 01
+
+ This command is not always present in ISO15693 tags (it is an optional standard command) but if it is present usually the tags contain all the "colored" info above.
+
+ If the above command doesn't give an answer (see example below):
+
+ proxmark3> hf 15 cmd sysinfo -2 u
+ timeout: no
+
+ we must send the MANDATORY (present in ALL iso15693 tags) command (the example below is sent to a tag different from the above one):
+
+ proxmark3> hf 15 cmd inquiry
+ UID=E007C1A257394244
+ Tag Info: Texas Instrument; Tag-it HF-I Standard; 8x32bit
+ proxmark3>
+
+ From which we obtain less information than the above one.
+ ]]
+
+ local command, result, info, err, data
+ local data = "02"
+ local datalen = string.len(data) / 2
+ local speed = 1
+ local recv = 1
+ command = Command:new{cmd = cmds.CMD_ISO_15693_COMMAND,
+ arg1 = datalen,arg2 = speed,arg3 =recv, data=data}
+ -- These are defined in common/iso15693tools.h
+
+ -- #define ISO15_REQ_SUBCARRIER_SINGLE 0x00 // Tag should respond using one subcarrier (ASK)
+ -- #define ISO15_REQ_DATARATE_HIGH 0x02 // Tag should respond using high data rate
+ -- #define ISO15_REQ_NONINVENTORY 0x00
+
+ local result,err = sendToDevice(command)
+
+ if not result then
+ print(err)
+ return nil, "15693 sysinfo: no answer"
+ end
+
+ local count,cmd,recvLen,arg1,arg2 = bin.unpack('LLLL',result)
+ data = string.sub(result,recvlen)
+ info, err = parse15693(data)
+
+ if err then
+ return nil, err
+ end
+
+ return info
+end
+
+
+}
+local reader15693 = {
+ read = read15693
+}
+
+
+---
+-- This method library can be set waits or a 13.56 MHz tag, and when one is found, returns info about
+-- what tag it is.
+--
+-- @return if successfull: an table containing card info
+-- @return if unsuccessfull : nil, error
+local function waitForTag()
+ print("Waiting for card... press any key to quit")
+ local readers = [reader14443A, reader14443B, readerISO15693]
+ local r
+ while not core.ukbhit() do
+ for _, r in ipairs(readers) do
+ res, err = r.read()
+ if res then return res end
+ -- err means that there was no response from card
+ end
+ return nil, "Aborted by user"
+end
\ No newline at end of file
projects / proxmark3-svn / commitdiff