}
void clear_trace() {
- uint8_t *trace = BigBuf_get_addr();
- uint16_t max_traceLen = BigBuf_max_traceLen();
- memset(trace, 0x44, max_traceLen);
traceLen = 0;
}
traceLen += iLen;
// parity bytes
- if (parity != NULL && iLen != 0) {
- memcpy(trace + traceLen, parity, num_paritybytes);
+ if (iLen != 0) {
+ if (parity != NULL) {
+ memcpy(trace + traceLen, parity, num_paritybytes);
+ } else {
+ memset(trace + traceLen, 0x00, num_paritybytes);
+ }
}
traceLen += num_paritybytes;
return TRUE;
}
+
+
// Emulator memory
uint8_t emlSet(uint8_t *data, uint32_t offset, uint32_t length){
uint8_t* mem = BigBuf_get_EM_addr();
ComputeCrc14443(CRC_14443_A,data,len,data+len,data+len+1);
}
+void AppendCrc14443b(uint8_t* data, int len)
+{
+ ComputeCrc14443(CRC_14443_B,data,len,data+len,data+len+1);
+}
+
+
//=============================================================================
// ISO 14443 Type A - Miller decoder
//=============================================================================
static tUart Uart;
// Lookup-Table to decide if 4 raw bits are a modulation.
-// We accept two or three consecutive "0" in any position with the rest "1"
+// We accept the following:
+// 0001 - a 3 tick wide pause
+// 0011 - a 2 tick wide pause, or a three tick wide pause shifted left
+// 0111 - a 2 tick wide pause shifted left
+// 1001 - a 2 tick wide pause shifted right
const bool Mod_Miller_LUT[] = {
- TRUE, TRUE, FALSE, TRUE, FALSE, FALSE, FALSE, FALSE,
- TRUE, TRUE, FALSE, FALSE, TRUE, FALSE, FALSE, FALSE
+ FALSE, TRUE, FALSE, TRUE, FALSE, FALSE, FALSE, TRUE,
+ FALSE, TRUE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE
};
-#define IsMillerModulationNibble1(b) (Mod_Miller_LUT[(b & 0x00F0) >> 4])
-#define IsMillerModulationNibble2(b) (Mod_Miller_LUT[(b & 0x000F)])
+#define IsMillerModulationNibble1(b) (Mod_Miller_LUT[(b & 0x000000F0) >> 4])
+#define IsMillerModulationNibble2(b) (Mod_Miller_LUT[(b & 0x0000000F)])
void UartReset()
{
Uart.parityLen = 0; // number of decoded parity bytes
Uart.shiftReg = 0; // shiftreg to hold decoded data bits
Uart.parityBits = 0; // holds 8 parity bits
- Uart.twoBits = 0x0000; // buffer for 2 Bits
- Uart.highCnt = 0;
Uart.startTime = 0;
Uart.endTime = 0;
}
{
Uart.output = data;
Uart.parity = parity;
+ Uart.fourBits = 0x00000000; // clear the buffer for 4 Bits
UartReset();
}
static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time)
{
- Uart.twoBits = (Uart.twoBits << 8) | bit;
+ Uart.fourBits = (Uart.fourBits << 8) | bit;
if (Uart.state == STATE_UNSYNCD) { // not yet synced
- if (Uart.highCnt < 2) { // wait for a stable unmodulated signal
- if (Uart.twoBits == 0xffff) {
- Uart.highCnt++;
- } else {
- Uart.highCnt = 0;
- }
- } else {
- Uart.syncBit = 0xFFFF; // not set
- // we look for a ...1111111100x11111xxxxxx pattern (the start bit)
- if ((Uart.twoBits & 0xDF00) == 0x1F00) Uart.syncBit = 8; // mask is 11x11111 xxxxxxxx,
- // check for 00x11111 xxxxxxxx
- else if ((Uart.twoBits & 0xEF80) == 0x8F80) Uart.syncBit = 7; // both masks shifted right one bit, left padded with '1'
- else if ((Uart.twoBits & 0xF7C0) == 0xC7C0) Uart.syncBit = 6; // ...
- else if ((Uart.twoBits & 0xFBE0) == 0xE3E0) Uart.syncBit = 5;
- else if ((Uart.twoBits & 0xFDF0) == 0xF1F0) Uart.syncBit = 4;
- else if ((Uart.twoBits & 0xFEF8) == 0xF8F8) Uart.syncBit = 3;
- else if ((Uart.twoBits & 0xFF7C) == 0xFC7C) Uart.syncBit = 2;
- else if ((Uart.twoBits & 0xFFBE) == 0xFE3E) Uart.syncBit = 1;
- if (Uart.syncBit != 0xFFFF) { // found a sync bit
- Uart.startTime = non_real_time?non_real_time:(GetCountSspClk() & 0xfffffff8);
- Uart.startTime -= Uart.syncBit;
- Uart.endTime = Uart.startTime;
- Uart.state = STATE_START_OF_COMMUNICATION;
- }
+ Uart.syncBit = 9999; // not set
+ // The start bit is one ore more Sequence Y followed by a Sequence Z (... 11111111 00x11111). We need to distinguish from
+ // Sequence X followed by Sequence Y followed by Sequence Z (111100x1 11111111 00x11111)
+ // we therefore look for a ...xx11111111111100x11111xxxxxx... pattern
+ // (12 '1's followed by 2 '0's, eventually followed by another '0', followed by 5 '1's)
+ #define ISO14443A_STARTBIT_MASK 0x07FFEF80 // mask is 00000111 11111111 11101111 10000000
+ #define ISO14443A_STARTBIT_PATTERN 0x07FF8F80 // pattern is 00000111 11111111 10001111 10000000
+ if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 0)) == ISO14443A_STARTBIT_PATTERN >> 0) Uart.syncBit = 7;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 1)) == ISO14443A_STARTBIT_PATTERN >> 1) Uart.syncBit = 6;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 2)) == ISO14443A_STARTBIT_PATTERN >> 2) Uart.syncBit = 5;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 3)) == ISO14443A_STARTBIT_PATTERN >> 3) Uart.syncBit = 4;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 4)) == ISO14443A_STARTBIT_PATTERN >> 4) Uart.syncBit = 3;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 5)) == ISO14443A_STARTBIT_PATTERN >> 5) Uart.syncBit = 2;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 6)) == ISO14443A_STARTBIT_PATTERN >> 6) Uart.syncBit = 1;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 7)) == ISO14443A_STARTBIT_PATTERN >> 7) Uart.syncBit = 0;
+
+ if (Uart.syncBit != 9999) { // found a sync bit
+ Uart.startTime = non_real_time?non_real_time:(GetCountSspClk() & 0xfffffff8);
+ Uart.startTime -= Uart.syncBit;
+ Uart.endTime = Uart.startTime;
+ Uart.state = STATE_START_OF_COMMUNICATION;
}
} else {
- if (IsMillerModulationNibble1(Uart.twoBits >> Uart.syncBit)) {
- if (IsMillerModulationNibble2(Uart.twoBits >> Uart.syncBit)) { // Modulation in both halves - error
+ if (IsMillerModulationNibble1(Uart.fourBits >> Uart.syncBit)) {
+ if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation in both halves - error
UartReset();
} else { // Modulation in first half = Sequence Z = logic "0"
if (Uart.state == STATE_MILLER_X) { // error - must not follow after X
}
}
} else {
- if (IsMillerModulationNibble2(Uart.twoBits >> Uart.syncBit)) { // Modulation second half = Sequence X = logic "1"
+ if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation second half = Sequence X = logic "1"
Uart.bitCount++;
Uart.shiftReg = (Uart.shiftReg >> 1) | 0x100; // add a 1 to the shiftreg
Uart.state = STATE_MILLER_X;
return TRUE; // we are finished with decoding the raw data sequence
} else {
UartReset(); // Nothing received - start over
- Uart.highCnt = 1;
}
}
if (Uart.state == STATE_START_OF_COMMUNICATION) { // error - must not follow directly after SOC
UartReset();
- Uart.highCnt = 1;
} else { // a logic "0"
Uart.bitCount++;
Uart.shiftReg = (Uart.shiftReg >> 1); // add a 0 to the shiftreg
LEDsoff();
- // We won't start recording the frames that we acquire until we trigger;
- // a good trigger condition to get started is probably when we see a
- // response from the tag.
- // triggered == FALSE -- to wait first for card
- bool triggered = !(param & 0x03);
-
+ iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
+
// Allocate memory from BigBuf for some buffers
// free all previous allocations first
BigBuf_free();
bool TagIsActive = FALSE;
bool ReaderIsActive = FALSE;
- iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
-
// Set up the demodulator for tag -> reader responses.
DemodInit(receivedResponse, receivedResponsePar);
// Setup and start DMA.
FpgaSetupSscDma((uint8_t *)dmaBuf, DMA_BUFFER_SIZE);
+ // We won't start recording the frames that we acquire until we trigger;
+ // a good trigger condition to get started is probably when we see a
+ // response from the tag.
+ // triggered == FALSE -- to wait first for card
+ bool triggered = !(param & 0x03);
+
// And now we loop, receiving samples.
for(uint32_t rsamples = 0; TRUE; ) {
// And ready to receive another response.
DemodReset();
+ // And reset the Miller decoder including itS (now outdated) input buffer
+ UartInit(receivedCmd, receivedCmdPar);
+
LED_C_OFF();
}
TagIsActive = (Demod.state != DEMOD_UNSYNCD);
.modulation_n = 0
};
+ // We need to listen to the high-frequency, peak-detected path.
+ iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
+
BigBuf_free_keep_EM();
// allocate buffers:
int happened2 = 0;
int cmdsRecvd = 0;
- // We need to listen to the high-frequency, peak-detected path.
- iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
-
cmdsRecvd = 0;
tag_response_info_t* p_response;
}
// Only transmit parity bit if we transmitted a complete byte
- if (j == 8) {
+ if (j == 8 && parity != NULL) {
// Get the parity bit
if (parity[i>>3] & (0x80 >> (i&0x0007))) {
// Sequence X
}
}
+
void ReaderTransmitBitsPar(uint8_t* frame, uint16_t bits, uint8_t *par, uint32_t *timing)
{
CodeIso14443aBitsAsReaderPar(frame, bits, par);
}
}
+
void ReaderTransmitPar(uint8_t* frame, uint16_t len, uint8_t *par, uint32_t *timing)
{
ReaderTransmitBitsPar(frame, len*8, par, timing);
}
+
void ReaderTransmitBits(uint8_t* frame, uint16_t len, uint32_t *timing)
{
// Generate parity and redirect
ReaderTransmitBitsPar(frame, len, par, timing);
}
+
void ReaderTransmit(uint8_t* frame, uint16_t len, uint32_t *timing)
{
// Generate parity and redirect
memset(uid_ptr,0,10);
}
+ // check for proprietary anticollision:
+ if ((resp[0] & 0x1F) == 0) {
+ return 3;
+ }
+
// OK we will select at least at cascade 1, lets see if first byte of UID was 0x88 in
// which case we need to make a cascade 2 request and select - this is a long UID
// While the UID is not complete, the 3nd bit (from the right) is set in the SAK.
if(param & ISO14A_RAW) {
if(param & ISO14A_APPEND_CRC) {
- AppendCrc14443a(cmd,len);
+ if(param & ISO14A_TOPAZMODE) {
+ AppendCrc14443b(cmd,len);
+ } else {
+ AppendCrc14443a(cmd,len);
+ }
len += 2;
if (lenbits) lenbits += 16;
}
- if(lenbits>0) {
- GetParity(cmd, lenbits/8, par);
- ReaderTransmitBitsPar(cmd, lenbits, par, NULL);
- } else {
- ReaderTransmit(cmd,len, NULL);
+ if(lenbits>0) { // want to send a specific number of bits (e.g. short commands)
+ if(param & ISO14A_TOPAZMODE) {
+ int bits_to_send = lenbits;
+ uint16_t i = 0;
+ ReaderTransmitBitsPar(&cmd[i++], MIN(bits_to_send, 7), NULL, NULL); // first byte is always short (7bits) and no parity
+ bits_to_send -= 7;
+ while (bits_to_send > 0) {
+ ReaderTransmitBitsPar(&cmd[i++], MIN(bits_to_send, 8), NULL, NULL); // following bytes are 8 bit and no parity
+ bits_to_send -= 8;
+ }
+ } else {
+ GetParity(cmd, lenbits/8, par);
+ ReaderTransmitBitsPar(cmd, lenbits, par, NULL); // bytes are 8 bit with odd parity
+ }
+ } else { // want to send complete bytes only
+ if(param & ISO14A_TOPAZMODE) {
+ uint16_t i = 0;
+ ReaderTransmitBitsPar(&cmd[i++], 7, NULL, NULL); // first byte: 7 bits, no paritiy
+ while (i < len) {
+ ReaderTransmitBitsPar(&cmd[i++], 8, NULL, NULL); // following bytes: 8 bits, no paritiy
+ }
+ } else {
+ ReaderTransmit(cmd,len, NULL); // 8 bits, odd parity
+ }
}
arg0 = ReaderReceive(buf, par);
cmd_send(CMD_ACK,arg0,0,0,buf,sizeof(buf));
nttmp1 = prng_successor(nttmp1, 1);
if (nttmp1 == nt2) return i;
nttmp2 = prng_successor(nttmp2, 1);
- if (nttmp2 == nt1) return -i;
+ if (nttmp2 == nt1) return -i;
}
return(-99999); // either nt1 or nt2 are invalid nonces
uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE];
uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE];
+ if (first_try) {
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
+ }
+
// free eventually allocated BigBuf memory. We want all for tracing.
BigBuf_free();
if (first_try) {
mf_nr_ar3 = 0;
- iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
sync_time = GetCountSspClk() & 0xfffffff8;
sync_cycles = 65536; // theory: Mifare Classic's random generator repeats every 2^16 cycles (and so do the nonces).
nt_attacked = 0;
LED_B_OFF();
LED_C_OFF();
-
+
+ #define DARKSIDE_MAX_TRIES 32 // number of tries to sync on PRNG cycle. Then give up.
+ uint16_t unsuccessfull_tries = 0;
+
for(uint16_t i = 0; TRUE; i++) {
+ LED_C_ON();
WDT_HIT();
// Test if the action was cancelled
if(BUTTON_PRESS()) {
+ isOK = -1;
break;
}
- LED_C_ON();
-
if(!iso14443a_select_card(uid, NULL, &cuid)) {
if (MF_DBGLEVEL >= 1) Dbprintf("Mifare: Can't select card");
continue;
nt_attacked = nt;
}
else {
- if (nt_distance == -99999) { // invalid nonce received, try again
- continue;
+ if (nt_distance == -99999) { // invalid nonce received
+ unsuccessfull_tries++;
+ if (!nt_attacked && unsuccessfull_tries > DARKSIDE_MAX_TRIES) {
+ isOK = -3; // Card has an unpredictable PRNG. Give up
+ break;
+ } else {
+ continue; // continue trying...
+ }
}
sync_cycles = (sync_cycles - nt_distance);
if (MF_DBGLEVEL >= 3) Dbprintf("calibrating in cycle %d. nt_distance=%d, Sync_cycles: %d\n", i, nt_distance, sync_cycles);
if (nt_diff == 0 && first_try)
{
par[0]++;
+ if (par[0] == 0x00) { // tried all 256 possible parities without success. Card doesn't send NACK.
+ isOK = -2;
+ break;
+ }
} else {
par[0] = ((par[0] & 0x1F) + 1) | par_low;
}
memcpy(buf + 16, ks_list, 8);
memcpy(buf + 24, mf_nr_ar, 4);
- cmd_send(CMD_ACK,isOK,0,0,buf,28);
+ cmd_send(CMD_ACK, isOK, 0, 0, buf, 28);
// Thats it...
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0};
uint8_t ar_nr_collected = 0;
- // free eventually allocated BigBuf memory but keep Emulator Memory
- BigBuf_free_keep_EM();
-
- // clear trace
- clear_trace();
- set_tracing(TRUE);
-
// Authenticate response - nonce
uint32_t nonce = bytes_to_num(rAUTH_NT, 4);
if (_7BUID) {
rATQA[0] = 0x44;
rUIDBCC1[0] = 0x88;
+ rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3];
}
- // We need to listen to the high-frequency, peak-detected path.
- iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
-
-
if (MF_DBGLEVEL >= 1) {
if (!_7BUID) {
Dbprintf("4B UID: %02x%02x%02x%02x",
}
}
+ // We need to listen to the high-frequency, peak-detected path.
+ iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
+
+ // free eventually allocated BigBuf memory but keep Emulator Memory
+ BigBuf_free_keep_EM();
+
+ // clear trace
+ clear_trace();
+ set_tracing(TRUE);
+
+
bool finished = FALSE;
while (!BUTTON_PRESS() && !finished) {
WDT_HIT();
|| receivedCmd[0] == 0xB0) { // transfer
if (receivedCmd[1] >= 16 * 4) {
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
- if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate (0x%02) on out of range block: %d (0x%02x), nacking",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
+ if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate (0x%02x) on out of range block: %d (0x%02x), nacking",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
break;
}
if (receivedCmd[1] / 4 != cardAUTHSC) {
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
- if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate (0x%02) on block (0x%02x) not authenticated for (0x%02x), nacking",receivedCmd[0],receivedCmd[1],cardAUTHSC);
+ if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate (0x%02x) on block (0x%02x) not authenticated for (0x%02x), nacking",receivedCmd[0],receivedCmd[1],cardAUTHSC);
break;
}
}
uint8_t receivedResponse[MAX_MIFARE_FRAME_SIZE];
uint8_t receivedResponsePar[MAX_MIFARE_PARITY_SIZE];
- // As we receive stuff, we copy it from receivedCmd or receivedResponse
- // into trace, along with its length and other annotations.
- //uint8_t *trace = (uint8_t *)BigBuf;
-
+ iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
+
// free eventually allocated BigBuf memory
BigBuf_free();
// allocate the DMA buffer, used to stream samples from the FPGA
bool ReaderIsActive = FALSE;
bool TagIsActive = FALSE;
- iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
-
// Set up the demodulator for tag -> reader responses.
DemodInit(receivedResponse, receivedResponsePar);
if (MfSniffLogic(receivedCmd, Uart.len, Uart.parity, Uart.bitCount, TRUE)) break;
/* And ready to receive another command. */
- UartReset();
+ UartInit(receivedCmd, receivedCmdPar);
/* And also reset the demod code */
DemodReset();
// And ready to receive another response.
DemodReset();
+ // And reset the Miller decoder including its (now outdated) input buffer
+ UartInit(receivedCmd, receivedCmdPar);
}
TagIsActive = (Demod.state != DEMOD_UNSYNCD);
}
CC=gcc
CXX=g++
#COMMON_FLAGS = -m32
- VPATH = ../common
+ VPATH = ../common ../zlib
OBJDIR = obj
- LDLIBS = -L/opt/local/lib -L/usr/local/lib ../liblua/liblua.a -lreadline -lpthread -lm
+ LDLIBS = -L/opt/local/lib -L/usr/local/lib -lreadline -lpthread -lm
+ LUALIB = ../liblua/liblua.a
LDFLAGS = $(COMMON_FLAGS)
- CFLAGS = -std=c99 -I. -I../include -I../common -I/opt/local/include -I../liblua -Wall $(COMMON_FLAGS) -g -O4
+ CFLAGS = -std=c99 -I. -I../include -I../common -I../zlib -I/opt/local/include -I../liblua -Wall $(COMMON_FLAGS) -g -O4
LUAPLATFORM = generic
ifneq (,$(findstring MINGW,$(platform)))
else
CXXFLAGS = $(shell pkg-config --cflags QtCore QtGui 2>/dev/null) -Wall -O4
QTLDLIBS = $(shell pkg-config --libs QtCore QtGui 2>/dev/null)
+ LUALIB += -ldl
MOC = $(shell pkg-config --variable=moc_location QtCore)
- LDLIBS += -ldl
# Below is a variant you can use if you have problems compiling with QT5 on ubuntu. see http://www.proxmark.org/forum/viewtopic.php?id=1661 for more info.
#MOC = /usr/lib/x86_64-linux-gnu/qt4/bin/moc
LUAPLATFORM = linux
endif
-
ifneq ($(QTLDLIBS),)
QTGUI = $(OBJDIR)/proxgui.o $(OBJDIR)/proxguiqt.o $(OBJDIR)/proxguiqt.moc.o
CFLAGS += -DHAVE_GUI
CMDSRCS = nonce2key/crapto1.c\
-- nonce2key/crypto1.c\
-- nonce2key/nonce2key.c\
-- loclass/cipher.c \
-- loclass/cipherutils.c \
-- loclass/des.c \
-- loclass/ikeys.c \
-- loclass/elite_crack.c\
-- loclass/fileutils.c\
- mifarehost.c\
- crc.c \
- crc16.c \
- iso14443crc.c \
- iso15693tools.c \
- data.c \
- graph.c \
- ui.c \
- cmddata.c \
- lfdemod.c \
- cmdhf.c \
- cmdhf14a.c \
- cmdhf14b.c \
- cmdhf15.c \
- cmdhfepa.c \
- cmdhflegic.c \
- cmdhficlass.c \
- cmdhfmf.c \
- cmdhfmfu.c \
- cmdhftopaz.c \
- cmdhw.c \
- cmdlf.c \
- cmdlfio.c \
- cmdlfhid.c \
- cmdlfem4x.c \
- cmdlfhitag.c \
- cmdlfti.c \
- cmdparser.c \
- cmdmain.c \
- cmdlft55xx.c \
- cmdlfpcf7931.c\
- pm3_binlib.c\
- scripting.c\
- cmdscript.c\
- pm3_bitlib.c\
- aes.c\
- protocols.c
++ nonce2key/crypto1.c\
++ nonce2key/nonce2key.c\
++ loclass/cipher.c \
++ loclass/cipherutils.c \
++ loclass/des.c \
++ loclass/ikeys.c \
++ loclass/elite_crack.c\
++ loclass/fileutils.c\
+ mifarehost.c\
+ crc.c \
+ crc16.c \
+ crc64.c \
+ iso14443crc.c \
+ iso15693tools.c \
+ data.c \
+ graph.c \
+ ui.c \
+ cmddata.c \
+ lfdemod.c \
+ cmdhf.c \
+ cmdhf14a.c \
+ cmdhf14b.c \
+ cmdhf15.c \
+ cmdhfepa.c \
+ cmdhflegic.c \
+ cmdhficlass.c \
+ cmdhfmf.c \
+ cmdhfmfu.c \
++ cmdhftopaz.c \
+ cmdhw.c \
+ cmdlf.c \
+ cmdlfio.c \
+ cmdlfhid.c \
+ cmdlfem4x.c \
+ cmdlfhitag.c \
+ cmdlfti.c \
+ cmdparser.c \
+ cmdmain.c \
+ cmdlft55xx.c \
+ cmdlfpcf7931.c\
+ pm3_binlib.c\
+ scripting.c\
+ cmdscript.c\
+ pm3_bitlib.c\
+ aes.c\
+ protocols.c\
+ sha1.c\
+
+ ZLIBSRCS = deflate.c adler32.c trees.c zutil.c inflate.c inffast.c inftrees.c
+ ZLIB_FLAGS = -DZ_SOLO -DZ_PREFIX -DNO_GZIP -DZLIB_PM3_TUNED
+ #-DDEBUG -Dverbose=1
+
COREOBJS = $(CORESRCS:%.c=$(OBJDIR)/%.o)
CMDOBJS = $(CMDSRCS:%.c=$(OBJDIR)/%.o)
+ ZLIBOBJS = $(ZLIBSRCS:%.c=$(OBJDIR)/%.o)
RM = rm -f
- BINS = proxmark3 flasher #snooper cli
- CLEAN = cli cli.exe flasher flasher.exe proxmark3 proxmark3.exe snooper snooper.exe $(CMDOBJS) $(OBJDIR)/*.o *.o *.moc.cpp
+ BINS = proxmark3 flasher fpga_compress #snooper cli
+ CLEAN = cli cli.exe flasher flasher.exe proxmark3 proxmark3.exe fpga_compress fpga_compress.exe snooper snooper.exe $(CMDOBJS) $(OBJDIR)/*.o *.o *.moc.cpp
all: lua_build $(BINS)
all-static: LDLIBS:=-static $(LDLIBS)
- all-static: snooper cli flasher
-
- proxmark3: LDLIBS+=$(QTLDLIBS)
+ all-static: snooper cli flasher fpga_compress
+
+ proxmark3: LDLIBS+=$(LUALIB) $(QTLDLIBS)
proxmark3: $(OBJDIR)/proxmark3.o $(COREOBJS) $(CMDOBJS) $(QTGUI)
$(CXX) $(CXXFLAGS) $^ $(LDLIBS) -o $@
flasher: $(OBJDIR)/flash.o $(OBJDIR)/flasher.o $(COREOBJS)
$(CXX) $(CXXFLAGS) $^ $(LDLIBS) -o $@
+ fpga_compress: $(OBJDIR)/fpga_compress.o $(ZLIBOBJS)
+ $(CXX) $(CXXFLAGS) $(ZLIB_FLAGS) $^ $(LDLIBS) -o $@
+
$(OBJDIR)/%.o: %.c
- $(CC) $(CFLAGS) -c -o $@ $<
+ $(CC) $(CFLAGS) $(ZLIB_FLAGS) -c -o $@ $<
$(OBJDIR)/%.o: %.cpp
$(CXX) $(CXXFLAGS) -c -o $@ $<
#include "cmdhficlass.h"
#include "cmdhfmf.h"
#include "cmdhfmfu.h"
+#include "cmdhftopaz.h"
#include "protocols.h"
static int CmdHelp(const char *Cmd);
case MIFARE_CMD_DEC: snprintf(exp,size,"DEC(%d)",cmd[1]); break;
case MIFARE_CMD_RESTORE: snprintf(exp,size,"RESTORE(%d)",cmd[1]); break;
case MIFARE_CMD_TRANSFER: snprintf(exp,size,"TRANSFER(%d)",cmd[1]); break;
- case MIFARE_AUTH_KEYA: snprintf(exp,size,"AUTH-A(%d)",cmd[1]); break;
+ case MIFARE_AUTH_KEYA:{
+ if ( cmdsize > 3)
+ snprintf(exp,size,"AUTH-A(%d)",cmd[1]);
+ else
+ // case MIFARE_ULEV1_VERSION : both 0x60.
+ snprintf(exp,size,"EV1 VERSION");
+ break;
+ }
case MIFARE_AUTH_KEYB: snprintf(exp,size,"AUTH-B(%d)",cmd[1]); break;
case MIFARE_MAGICWUPC1: snprintf(exp,size,"MAGIC WUPC1"); break;
case MIFARE_MAGICWUPC2: snprintf(exp,size,"MAGIC WUPC2"); break;
case MIFARE_MAGICWIPEC: snprintf(exp,size,"MAGIC WIPEC"); break;
+ case MIFARE_ULC_AUTH_1: snprintf(exp,size,"AUTH "); break;
+ case MIFARE_ULC_AUTH_2: snprintf(exp,size,"AUTH_ANSW"); break;
+ case MIFARE_ULEV1_AUTH:
+ if ( cmdsize == 7 )
+ snprintf(exp,size,"PWD-AUTH KEY: 0x%02x%02x%02x%02x", cmd[1], cmd[2], cmd[3], cmd[4] );
+ else
+ snprintf(exp,size,"PWD-AUTH");
+ break;
+ case MIFARE_ULEV1_FASTREAD:{
+ if ( cmdsize >=3 && cmd[2] <= 0xE6)
+ snprintf(exp,size,"READ RANGE (%d-%d)",cmd[1],cmd[2]);
+ else
+ snprintf(exp,size,"?");
+ break;
+ }
+ case MIFARE_ULC_WRITE:{
+ if ( cmd[1] < 0x21 )
+ snprintf(exp,size,"WRITEBLOCK(%d)",cmd[1]);
+ else
+ snprintf(exp,size,"?");
+ break;
+ }
+ case MIFARE_ULEV1_READ_CNT:{
+ if ( cmd[1] < 5 )
+ snprintf(exp,size,"READ CNT(%d)",cmd[1]);
+ else
+ snprintf(exp,size,"?");
+ break;
+ }
+ case MIFARE_ULEV1_INCR_CNT:{
+ if ( cmd[1] < 5 )
+ snprintf(exp,size,"INCR(%d)",cmd[1]);
+ else
+ snprintf(exp,size,"?");
+ break;
+ }
+ case MIFARE_ULEV1_READSIG: snprintf(exp,size,"READ_SIG"); break;
+ case MIFARE_ULEV1_CHECKTEAR: snprintf(exp,size,"CHK_TEARING(%d)",cmd[1]); break;
+ case MIFARE_ULEV1_VCSL: snprintf(exp,size,"VCSL"); break;
default: snprintf(exp,size,"?"); break;
}
return;
}
}
+
+void annotateTopaz(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize)
+{
+ switch(cmd[0]) {
+ case TOPAZ_REQA :snprintf(exp, size, "REQA");break;
+ case TOPAZ_WUPA :snprintf(exp, size, "WUPA");break;
+ case TOPAZ_RID :snprintf(exp, size, "RID");break;
+ case TOPAZ_RALL :snprintf(exp, size, "RALL");break;
+ case TOPAZ_READ :snprintf(exp, size, "READ");break;
+ case TOPAZ_WRITE_E :snprintf(exp, size, "WRITE-E");break;
+ case TOPAZ_WRITE_NE :snprintf(exp, size, "WRITE-NE");break;
+ case TOPAZ_RSEG :snprintf(exp, size, "RSEG");break;
+ case TOPAZ_READ8 :snprintf(exp, size, "READ8");break;
+ case TOPAZ_WRITE_E8 :snprintf(exp, size, "WRITE-E8");break;
+ case TOPAZ_WRITE_NE8 :snprintf(exp, size, "WRITE-NE8");break;
+ default: snprintf(exp,size,"?"); break;
+ }
+}
+
+
/**
06 00 = INITIATE
0E xx = SELECT ID (xx = Chip-ID)
}
/**
- * @brief iso14443B_CRC_Ok Checks CRC in command or response
+ * @brief iso14443A_CRC_check Checks CRC in command or response
+ * @param isResponse
+ * @param data
+ * @param len
+ * @return 0 : CRC-command, CRC not ok
+ * 1 : CRC-command, CRC ok
+ * 2 : Not crc-command
+ */
+
+uint8_t iso14443A_CRC_check(bool isResponse, uint8_t* data, uint8_t len)
+{
+ uint8_t b1,b2;
+
+ if(len <= 2) return 2;
+
+ if(isResponse & (len < 6)) return 2;
+
+ ComputeCrc14443(CRC_14443_A, data, len-2, &b1, &b2);
+ if (b1 != data[len-2] || b2 != data[len-1]) {
+ return 0;
+ } else {
+ return 1;
+ }
+}
+
+
+/**
+ * @brief iso14443B_CRC_check Checks CRC in command or response
* @param isResponse
* @param data
* @param len
ComputeCrc14443(CRC_14443_B, data, len-2, &b1, &b2);
if(b1 != data[len-2] || b2 != data[len-1]) {
- return 0;
+ return 0;
+ } else {
+ return 1;
}
- return 1;
}
/**
}
}
-uint16_t printTraceLine(uint16_t tracepos, uint16_t traceLen, uint8_t *trace, uint8_t protocol, bool showWaitCycles)
+
+bool is_last_record(uint16_t tracepos, uint8_t *trace, uint16_t traceLen)
{
- bool isResponse;
- uint16_t duration, data_len, parity_len;
+ return(tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) >= traceLen);
+}
+
+
+bool next_record_is_response(uint16_t tracepos, uint8_t *trace)
+{
+ uint16_t next_records_datalen = *((uint16_t *)(trace + tracepos + sizeof(uint32_t) + sizeof(uint16_t)));
+
+ return(next_records_datalen & 0x8000);
+}
+
+
+bool merge_topaz_reader_frames(uint32_t timestamp, uint32_t *duration, uint16_t *tracepos, uint16_t traceLen, uint8_t *trace, uint8_t *frame, uint8_t *topaz_reader_command, uint16_t *data_len)
+{
+
+#define MAX_TOPAZ_READER_CMD_LEN 16
+
+ uint32_t last_timestamp = timestamp + *duration;
+
+ if ((*data_len != 1) || (frame[0] == TOPAZ_WUPA) || (frame[0] == TOPAZ_REQA)) return false;
+ memcpy(topaz_reader_command, frame, *data_len);
+
+ while (!is_last_record(*tracepos, trace, traceLen) && !next_record_is_response(*tracepos, trace)) {
+ uint32_t next_timestamp = *((uint32_t *)(trace + *tracepos));
+ *tracepos += sizeof(uint32_t);
+ uint16_t next_duration = *((uint16_t *)(trace + *tracepos));
+ *tracepos += sizeof(uint16_t);
+ uint16_t next_data_len = *((uint16_t *)(trace + *tracepos)) & 0x7FFF;
+ *tracepos += sizeof(uint16_t);
+ uint8_t *next_frame = (trace + *tracepos);
+ *tracepos += next_data_len;
+ if ((next_data_len == 1) && (*data_len + next_data_len <= MAX_TOPAZ_READER_CMD_LEN)) {
+ memcpy(topaz_reader_command + *data_len, next_frame, next_data_len);
+ *data_len += next_data_len;
+ last_timestamp = next_timestamp + next_duration;
+ } else {
+ // rewind and exit
+ *tracepos = *tracepos - next_data_len - sizeof(uint16_t) - sizeof(uint16_t) - sizeof(uint32_t);
+ break;
+ }
+ uint16_t next_parity_len = (next_data_len-1)/8 + 1;
+ *tracepos += next_parity_len;
+ }
+
+ *duration = last_timestamp - timestamp;
+
+ return true;
+}
+
+
+uint16_t printTraceLine(uint16_t tracepos, uint16_t traceLen, uint8_t *trace, uint8_t protocol, bool showWaitCycles, bool markCRCBytes)
+{
+ bool isResponse;
+ uint16_t data_len, parity_len;
+ uint32_t duration;
+ uint8_t topaz_reader_command[9];
uint32_t timestamp, first_timestamp, EndOfTransmissionTimestamp;
char explanation[30] = {0};
uint8_t *parityBytes = trace + tracepos;
tracepos += parity_len;
+ if (protocol == TOPAZ && !isResponse) {
+ // topaz reader commands come in 1 or 9 separate frames with 7 or 8 Bits each.
+ // merge them:
+ if (merge_topaz_reader_frames(timestamp, &duration, &tracepos, traceLen, trace, frame, topaz_reader_command, &data_len)) {
+ frame = topaz_reader_command;
+ }
+ }
+
//Check the CRC status
uint8_t crcStatus = 2;
if (data_len > 2) {
- uint8_t b1, b2;
- if(protocol == ICLASS)
- {
- crcStatus = iclass_CRC_check(isResponse, frame, data_len);
-
- }else if (protocol == ISO_14443B)
- {
- crcStatus = iso14443B_CRC_check(isResponse, frame, data_len);
- }
- else if (protocol == ISO_14443A){//Iso 14443a
-
- ComputeCrc14443(CRC_14443_A, frame, data_len-2, &b1, &b2);
-
- if (b1 != frame[data_len-2] || b2 != frame[data_len-1]) {
- if(!(isResponse & (data_len < 6)))
- {
- crcStatus = 0;
- }
- }
+ switch (protocol) {
+ case ICLASS:
+ crcStatus = iclass_CRC_check(isResponse, frame, data_len);
+ break;
+ case ISO_14443B:
+ case TOPAZ:
+ crcStatus = iso14443B_CRC_check(isResponse, frame, data_len);
+ break;
+ case ISO_14443A:
+ crcStatus = iso14443A_CRC_check(isResponse, frame, data_len);
+ break;
+ default:
+ break;
}
}
//0 CRC-command, CRC not ok
oddparity ^= (((frame[j] & 0xFF) >> k) & 0x01);
}
uint8_t parityBits = parityBytes[j>>3];
- if (isResponse && (oddparity != ((parityBits >> (7-(j&0x0007))) & 0x01))) {
- snprintf(line[j/16]+(( j % 16) * 4), 110, " %02x!", frame[j]);
+ if (protocol != ISO_14443B && isResponse && (oddparity != ((parityBits >> (7-(j&0x0007))) & 0x01))) {
+ snprintf(line[j/16]+(( j % 16) * 4),110, "%02x! ", frame[j]);
-
} else {
- snprintf(line[j/16]+(( j % 16) * 4),110, "%02x ", frame[j]);
+ snprintf(line[j/16]+(( j % 16) * 4), 110, " %02x ", frame[j]);
}
}
- if(crcStatus == 1)
- {//CRC-command
- char *pos1 = line[(data_len-2)/16]+(((data_len-2) % 16) * 4)-1;
- (*pos1) = '[';
- char *pos2 = line[(data_len)/16]+(((data_len) % 16) * 4)-2;
- (*pos2) = ']';
+
+ if (markCRCBytes) {
+ if(crcStatus == 0 || crcStatus == 1)
+ {//CRC-command
+ char *pos1 = line[(data_len-2)/16]+(((data_len-2) % 16) * 4);
+ (*pos1) = '[';
+ char *pos2 = line[(data_len)/16]+(((data_len) % 16) * 4);
+ sprintf(pos2, "%c", ']');
+ }
}
+
if(data_len == 0)
{
if(data_len == 0){
if(!isResponse)
{
- if(protocol == ICLASS)
- annotateIclass(explanation,sizeof(explanation),frame,data_len);
- else if (protocol == ISO_14443A)
- annotateIso14443a(explanation,sizeof(explanation),frame,data_len);
- else if(protocol == ISO_14443B)
- annotateIso14443b(explanation,sizeof(explanation),frame,data_len);
+ switch(protocol) {
+ case ICLASS: annotateIclass(explanation,sizeof(explanation),frame,data_len); break;
+ case ISO_14443A: annotateIso14443a(explanation,sizeof(explanation),frame,data_len); break;
+ case ISO_14443B: annotateIso14443b(explanation,sizeof(explanation),frame,data_len); break;
+ case TOPAZ: annotateTopaz(explanation,sizeof(explanation),frame,data_len); break;
+ default: break;
+ }
}
int num_lines = MIN((data_len - 1)/16 + 1, 16);
for (int j = 0; j < num_lines ; j++) {
if (j == 0) {
- PrintAndLog(" %9d | %9d | %s | %-64s| %s| %s",
+ PrintAndLog(" %10d | %10d | %s |%-64s | %s| %s",
(timestamp - first_timestamp),
(EndOfTransmissionTimestamp - first_timestamp),
(isResponse ? "Tag" : "Rdr"),
(j == num_lines-1) ? crc : " ",
(j == num_lines-1) ? explanation : "");
} else {
- PrintAndLog(" | | | %-64s| %s| %s",
+ PrintAndLog(" | | |%-64s | %s| %s",
line[j],
- (j == num_lines-1)?crc:" ",
+ (j == num_lines-1) ? crc : " ",
(j == num_lines-1) ? explanation : "");
}
}
- if (tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) > traceLen) return traceLen;
+ if (is_last_record(tracepos, trace, traceLen)) return traceLen;
- bool next_isResponse = *((uint16_t *)(trace + tracepos + 6)) & 0x8000;
-
- if (showWaitCycles && !isResponse && next_isResponse) {
+ if (showWaitCycles && !isResponse && next_record_is_response(tracepos, trace)) {
uint32_t next_timestamp = *((uint32_t *)(trace + tracepos));
- if (next_timestamp != 0x44444444) {
- PrintAndLog(" %9d | %9d | %s | fdt (Frame Delay Time): %d",
- (EndOfTransmissionTimestamp - first_timestamp),
- (next_timestamp - first_timestamp),
- " ",
- (next_timestamp - EndOfTransmissionTimestamp));
- }
+ PrintAndLog(" %9d | %9d | %s | fdt (Frame Delay Time): %d",
+ (EndOfTransmissionTimestamp - first_timestamp),
+ (next_timestamp - first_timestamp),
+ " ",
+ (next_timestamp - EndOfTransmissionTimestamp));
}
return tracepos;
int CmdHFList(const char *Cmd)
{
bool showWaitCycles = false;
+ bool markCRCBytes = false;
char type[40] = {0};
int tlen = param_getstr(Cmd,0,type);
- char param = param_getchar(Cmd, 1);
+ char param1 = param_getchar(Cmd, 1);
+ char param2 = param_getchar(Cmd, 2);
bool errors = false;
uint8_t protocol = 0;
//Validate params
- if(tlen == 0)
- {
+
+ if(tlen == 0) {
errors = true;
}
- if(param == 'h' || (param !=0 && param != 'f'))
- {
+
+ if(param1 == 'h'
+ || (param1 != 0 && param1 != 'f' && param1 != 'c')
+ || (param2 != 0 && param2 != 'f' && param2 != 'c')) {
errors = true;
}
- if(!errors)
- {
- if(strcmp(type, "iclass") == 0)
- {
+
+ if(!errors) {
+ if(strcmp(type, "iclass") == 0) {
protocol = ICLASS;
- }else if(strcmp(type, "14a") == 0)
- {
+ } else if(strcmp(type, "14a") == 0) {
protocol = ISO_14443A;
- }
- else if(strcmp(type, "14b") == 0)
- {
+ } else if(strcmp(type, "14b") == 0) {
protocol = ISO_14443B;
- }else if(strcmp(type,"raw")== 0)
- {
+ } else if(strcmp(type,"topaz")== 0) {
+ protocol = TOPAZ;
+ } else if(strcmp(type,"raw")== 0) {
protocol = -1;//No crc, no annotations
- }else{
+ } else {
errors = true;
}
}
if (errors) {
PrintAndLog("List protocol data in trace buffer.");
- PrintAndLog("Usage: hf list <protocol> [f]");
+ PrintAndLog("Usage: hf list <protocol> [f][c]");
PrintAndLog(" f - show frame delay times as well");
+ PrintAndLog(" c - mark CRC bytes");
PrintAndLog("Supported <protocol> values:");
PrintAndLog(" raw - just show raw data without annotations");
PrintAndLog(" 14a - interpret data as iso14443a communications");
PrintAndLog(" 14b - interpret data as iso14443b communications");
PrintAndLog(" iclass - interpret data as iclass communications");
+ PrintAndLog(" topaz - interpret data as topaz communications");
PrintAndLog("");
PrintAndLog("example: hf list 14a f");
PrintAndLog("example: hf list iclass");
}
- if (param == 'f') {
+ if (param1 == 'f' || param2 == 'f') {
showWaitCycles = true;
}
+ if (param1 == 'c' || param2 == 'c') {
+ markCRCBytes = true;
+ }
uint8_t *trace;
uint16_t tracepos = 0;
PrintAndLog("iso14443a - All times are in carrier periods (1/13.56Mhz)");
PrintAndLog("iClass - Timings are not as accurate");
PrintAndLog("");
- PrintAndLog(" Start | End | Src | Data (! denotes parity error) | CRC | Annotation |");
- PrintAndLog("-----------|-----------|-----|-----------------------------------------------------------------|-----|--------------------|");
+ PrintAndLog(" Start | End | Src | Data (! denotes parity error) | CRC | Annotation |");
+ PrintAndLog("------------|------------|-----|-----------------------------------------------------------------|-----|--------------------|");
while(tracepos < traceLen)
{
- tracepos = printTraceLine(tracepos, traceLen, trace, protocol, showWaitCycles);
+ tracepos = printTraceLine(tracepos, traceLen, trace, protocol, showWaitCycles, markCRCBytes);
}
free(trace);
return 0;
}
+ int CmdHFSearch(const char *Cmd){
+ int ans = 0;
+ PrintAndLog("");
+ ans = CmdHF14AReader("s");
+ if (ans > 0) {
+ PrintAndLog("\nValid ISO14443A Tag Found - Quiting Search\n");
+ return ans;
+ }
+ ans = HF14BInfo(false);
+ if (ans) {
+ PrintAndLog("\nValid ISO14443B Tag Found - Quiting Search\n");
+ return ans;
+ }
+ ans = HFiClassReader("", false, false);
+ if (ans) {
+ PrintAndLog("\nValid iClass Tag (or PicoPass Tag) Found - Quiting Search\n");
+ return ans;
+ }
+ ans = HF15Reader("", false);
+ if (ans) {
+ PrintAndLog("\nValid ISO15693 Tag Found - Quiting Search\n");
+ return ans;
+ }
+ PrintAndLog("\nno known/supported 13.56 MHz tags found\n");
+ return 0;
+ }
static command_t CommandTable[] =
{
++<<<<<<< HEAD
+ {"help", CmdHelp, 1, "This help"},
+ {"14a", CmdHF14A, 1, "{ ISO14443A RFIDs... }"},
+ {"14b", CmdHF14B, 1, "{ ISO14443B RFIDs... }"},
+ {"15", CmdHF15, 1, "{ ISO15693 RFIDs... }"},
+ {"epa", CmdHFEPA, 1, "{ German Identification Card... }"},
+ {"legic", CmdHFLegic, 0, "{ LEGIC RFIDs... }"},
+ {"iclass", CmdHFiClass, 1, "{ ICLASS RFIDs... }"},
+ {"mf", CmdHFMF, 1, "{ MIFARE RFIDs... }"},
+ {"mfu", CmdHFMFUltra, 1, "{ MIFARE Ultralight RFIDs... }"},
+ {"topaz", CmdHFTopaz, 1, "{ TOPAZ (NFC Type 1) RFIDs... }"},
+ {"tune", CmdHFTune, 0, "Continuously measure HF antenna tuning"},
+ {"list", CmdHFList, 1, "List protocol data in trace buffer"},
+ {NULL, NULL, 0, NULL}
++=======
+ {"help", CmdHelp, 1, "This help"},
+ {"14a", CmdHF14A, 1, "{ ISO14443A RFIDs... }"},
+ {"14b", CmdHF14B, 1, "{ ISO14443B RFIDs... }"},
+ {"15", CmdHF15, 1, "{ ISO15693 RFIDs... }"},
+ {"epa", CmdHFEPA, 1, "{ German Identification Card... }"},
+ {"legic", CmdHFLegic, 0, "{ LEGIC RFIDs... }"},
+ {"iclass", CmdHFiClass, 1, "{ ICLASS RFIDs... }"},
+ {"mf", CmdHFMF, 1, "{ MIFARE RFIDs... }"},
+ {"mfu", CmdHFMFUltra, 1, "{ MIFARE Ultralight RFIDs... }"},
+ {"tune", CmdHFTune, 0, "Continuously measure HF antenna tuning"},
+ {"list", CmdHFList, 1, "List protocol data in trace buffer"},
+ {"search", CmdHFSearch, 1, "Search for known HF tags [preliminary]"},
+ {NULL, NULL, 0, NULL}
++>>>>>>> master
};
int CmdHF(const char *Cmd)
#include "common.h"
#include "cmdmain.h"
#include "mifare.h"
+ #include "cmdhfmfu.h"
static int CmdHelp(const char *Cmd);
static void waitCmd(uint8_t iLen);
iso14a_card_select_t card;
memcpy(&card, (iso14a_card_select_t *)resp.d.asBytes, sizeof(iso14a_card_select_t));
- uint64_t select_status = resp.arg[0]; // 0: couldn't read, 1: OK, with ATS, 2: OK, no ATS
+ uint64_t select_status = resp.arg[0]; // 0: couldn't read, 1: OK, with ATS, 2: OK, no ATS, 3: proprietary Anticollision
if(select_status == 0) {
- PrintAndLog("iso14443a card select failed");
+ if (Cmd[0] != 's') PrintAndLog("iso14443a card select failed");
// disconnect
c.arg[0] = 0;
c.arg[1] = 0;
return 0;
}
-
- PrintAndLog("ATQA : %02x %02x", card.atqa[1], card.atqa[0]);
PrintAndLog(" UID : %s", sprint_hex(card.uid, card.uidlen));
+ PrintAndLog("ATQA : %02x %02x", card.atqa[1], card.atqa[0]);
PrintAndLog(" SAK : %02x [%d]", card.sak, resp.arg[0]);
- // Double & triple sized UID, can be mapped to a manufacturer.
- // HACK: does this apply for Ultralight cards?
- if ( card.uidlen > 4 ) {
- PrintAndLog("MANUFACTURER : %s", getTagInfo(card.uid[0]));
- }
-
switch (card.sak) {
- case 0x00: PrintAndLog("TYPE : NXP MIFARE Ultralight | Ultralight C"); break;
+ case 0x00:
+
+ //***************************************test****************
+ // disconnect
+ c.arg[0] = 0;
+ c.arg[1] = 0;
+ c.arg[2] = 0;
+ SendCommand(&c);
+
+ uint32_t tagT = GetHF14AMfU_Type();
+ ul_print_type(tagT, 0);
+
+ //reconnect for further tests
+ c.arg[0] = ISO14A_CONNECT | ISO14A_NO_DISCONNECT;
+ c.arg[1] = 0;
+ c.arg[2] = 0;
+
+ SendCommand(&c);
+
+ UsbCommand resp;
+ WaitForResponse(CMD_ACK,&resp);
+
+ memcpy(&card, (iso14a_card_select_t *)resp.d.asBytes, sizeof(iso14a_card_select_t));
+
+ select_status = resp.arg[0]; // 0: couldn't read, 1: OK, with ATS, 2: OK, no ATS
+
+ if(select_status == 0) {
+ //PrintAndLog("iso14443a card select failed");
+ // disconnect
+ c.arg[0] = 0;
+ c.arg[1] = 0;
+ c.arg[2] = 0;
+ SendCommand(&c);
+ return 0;
+ }
+
+ /* orig
+ // check if the tag answers to GETVERSION (0x60)
+ c.arg[0] = ISO14A_RAW | ISO14A_APPEND_CRC | ISO14A_NO_DISCONNECT;
+ c.arg[1] = 1;
+ c.arg[2] = 0;
+ c.d.asBytes[0] = 0x60;
+ SendCommand(&c);
+ WaitForResponse(CMD_ACK,&resp);
+
+ uint8_t version[10] = {0};
+ memcpy(version, resp.d.asBytes, resp.arg[0] < sizeof(version) ? resp.arg[0] : sizeof(version));
+ uint8_t len = resp.arg[0] & 0xff;
+ switch ( len ){
+ // todo, identify "Magic UL-C tags". // they usually have a static nonce response to 0x1A command.
+ // UL-EV1, size, check version[6] == 0x0b (smaller) 0x0b * 4 == 48
+ case 0x0A:PrintAndLog("TYPE : NXP MIFARE Ultralight EV1 %d bytes", (version[6] == 0xB) ? 48 : 128);break;
+ case 0x01:PrintAndLog("TYPE : NXP MIFARE Ultralight C");break;
+ case 0x00:PrintAndLog("TYPE : NXP MIFARE Ultralight");break;
+ }
+ */
+ break;
case 0x01: PrintAndLog("TYPE : NXP TNP3xxx Activision Game Appliance"); break;
case 0x04: PrintAndLog("TYPE : NXP MIFARE (various !DESFire !DESFire EV1)"); break;
case 0x08: PrintAndLog("TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1"); break;
default: ;
}
+ // Double & triple sized UID, can be mapped to a manufacturer.
+ // HACK: does this apply for Ultralight cards?
+ if ( card.uidlen > 4 ) {
+ PrintAndLog("MANUFACTURER : %s", getTagInfo(card.uid[0]));
+ }
+
// try to request ATS even if tag claims not to support it
if (select_status == 2) {
uint8_t rats[] = { 0xE0, 0x80 }; // FSDI=8 (FSD=256), CID=0
SendCommand(&c);
WaitForResponse(CMD_ACK,&resp);
- memcpy(&card.ats, resp.d.asBytes, resp.arg[0]);
+ memcpy(card.ats, resp.d.asBytes, resp.arg[0]);
card.ats_len = resp.arg[0]; // note: ats_len includes CRC Bytes
}
return 0;
}
+
int CmdHF14ACmdRaw(const char *cmd) {
UsbCommand c = {CMD_READER_ISO_14443a, {0, 0, 0}};
- uint8_t reply=1;
- uint8_t crc=0;
- uint8_t power=0;
- uint8_t active=0;
- uint8_t active_select=0;
- uint16_t numbits=0;
- uint32_t timeout=0;
- uint8_t bTimeout=0;
+ bool reply=1;
+ bool crc = FALSE;
+ bool power = FALSE;
+ bool active = FALSE;
+ bool active_select = FALSE;
+ uint16_t numbits = 0;
+ bool bTimeout = FALSE;
+ uint32_t timeout = 0;
+ bool topazmode = FALSE;
char buf[5]="";
- int i=0;
+ int i = 0;
uint8_t data[USB_CMD_DATA_SIZE];
- uint16_t datalen=0;
+ uint16_t datalen = 0;
uint32_t temp;
if (strlen(cmd)<2) {
PrintAndLog(" -s active signal field ON with select");
PrintAndLog(" -b number of bits to send. Useful for send partial byte");
PrintAndLog(" -t timeout in ms");
+ PrintAndLog(" -T use Topaz protocol to send command");
return 0;
}
+
// strip
while (*cmd==' ' || *cmd=='\t') cmd++;
if (cmd[i]=='-') {
switch (cmd[i+1]) {
case 'r':
- reply=0;
+ reply = FALSE;
break;
case 'c':
- crc=1;
+ crc = TRUE;
break;
case 'p':
- power=1;
+ power = TRUE;
break;
case 'a':
- active=1;
+ active = TRUE;
break;
case 's':
- active_select=1;
+ active_select = TRUE;
break;
case 'b':
sscanf(cmd+i+2,"%d",&temp);
i-=2;
break;
case 't':
- bTimeout=1;
+ bTimeout = TRUE;
sscanf(cmd+i+2,"%d",&temp);
timeout = temp;
i+=3;
while(cmd[i]!=' ' && cmd[i]!='\0') { i++; }
i-=2;
break;
+ case 'T':
+ topazmode = TRUE;
+ break;
default:
PrintAndLog("Invalid option");
return 0;
PrintAndLog("Invalid char on input");
return 0;
}
+
if(crc && datalen>0 && datalen<sizeof(data)-2)
{
uint8_t first, second;
- ComputeCrc14443(CRC_14443_A, data, datalen, &first, &second);
+ if (topazmode) {
+ ComputeCrc14443(CRC_14443_B, data, datalen, &first, &second);
+ } else {
+ ComputeCrc14443(CRC_14443_A, data, datalen, &first, &second);
+ }
data[datalen++] = first;
data[datalen++] = second;
}
}
if(bTimeout){
- #define MAX_TIMEOUT 40542464 // (2^32-1) * (8*16) / 13560000Hz * 1000ms/s =
+ #define MAX_TIMEOUT 40542464 // = (2^32-1) * (8*16) / 13560000Hz * 1000ms/s
c.arg[0] |= ISO14A_SET_TIMEOUT;
if(timeout > MAX_TIMEOUT) {
timeout = MAX_TIMEOUT;
}
c.arg[2] = 13560000 / 1000 / (8*16) * timeout; // timeout in ETUs (time to transfer 1 bit, approx. 9.4 us)
}
+
if(power)
c.arg[0] |= ISO14A_NO_DISCONNECT;
- if(datalen>0)
+
+ if(datalen > 0)
c.arg[0] |= ISO14A_RAW;
+ if(topazmode)
+ c.arg[0] |= ISO14A_TOPAZMODE;
+
// Max buffer is USB_CMD_DATA_SIZE
c.arg[1] = (datalen & 0xFFFF) | (numbits << 16);
memcpy(c.d.asBytes,data,datalen);
return 0;
}
+
static void waitCmd(uint8_t iSelect)
{
uint8_t *recv;
if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
recv = resp.d.asBytes;
uint8_t iLen = iSelect ? resp.arg[1] : resp.arg[0];
- PrintAndLog("received %i octets",iLen);
+ PrintAndLog("received %i octets", iLen);
if(!iLen)
return;
hexout = (char *)malloc(iLen * 3 + 1);
AS = $(CROSS)as
LD = $(CROSS)ld
OBJCOPY = $(CROSS)objcopy
+ GZIP=gzip
OBJDIR = obj
endif
- # Also search prerequisites in the common directory (for usb.c), and the fpga directory (for fpga.bit)
- VPATH = . ../common/ ../fpga/
+ # Also search prerequisites in the common directory (for usb.c), the fpga directory (for fpga.bit), and the zlib directory
+ VPATH = . ../common ../fpga ../zlib
INCLUDES = ../include/proxmark3.h ../include/at91sam7s512.h ../include/config_gpio.h ../include/usb_cmd.h $(APP_INCLUDES)
-CFLAGS = -c $(INCLUDE) -Wall -Werror -pedantic -std=c99 $(APP_CFLAGS) -Os
+CFLAGS = -c $(INCLUDE) -Wall -Werror -pedantic -std=c99 -Os $(APP_CFLAGS)
LDFLAGS = -nostartfiles -nodefaultlibs -Wl,-gc-sections -n
LIBS = -lgcc
- THUMBOBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(THUMBSRC))
- ARMOBJ = $(ARMSRC:%.c=$(OBJDIR)/%.o)
- ASMOBJ = $(patsubst %.s,$(OBJDIR)/%.o,$(ASMSRC))
+ THUMBOBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(notdir $(THUMBSRC)))
+ ARMOBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(notdir $(ARMSRC)))
+ ASMOBJ = $(patsubst %.s,$(OBJDIR)/%.o,$(notdir $(ASMSRC)))
VERSIONOBJ = $(OBJDIR)/version.o
$(THUMBOBJ): $(OBJDIR)/%.o: %.c $(INCLUDES)
$(patsubst %.s,$(OBJDIR)/%.d,$(notdir $(ASMSRC)))
$(DEPENDENCY_FILES): Makefile ../common/Makefile.common
+
$(patsubst %.o,%.d,$(THUMBOBJ) $(ARMOBJ)): $(OBJDIR)/%.d: %.c
@$(CC) -MM -MT "$(@) $(@:.d=.o)" $(CFLAGS) $< > $@
$(patsubst %.o,%.d,$(ASMOBJ)):$(OBJDIR)/%.d: %.s
#define MIFARE_CMD_RESTORE 0xC2
#define MIFARE_CMD_TRANSFER 0xB0
- #define MIFARE_ULC_WRITE 0xA0
+ #define MIFARE_ULC_WRITE 0xA2
+ //#define MIFARE_ULC__COMP_WRITE 0xA0
#define MIFARE_ULC_AUTH_1 0x1A
- #define MIFARE_ULC_AUTH_2 0xAF
+ #define MIFARE_ULC_AUTH_2 0xAF
+
+ #define MIFARE_ULEV1_AUTH 0x1B
+ #define MIFARE_ULEV1_VERSION 0x60
+ #define MIFARE_ULEV1_FASTREAD 0x3A
+ //#define MIFARE_ULEV1_WRITE 0xA2
+ //#define MIFARE_ULEV1_COMP_WRITE 0xA0
+ #define MIFARE_ULEV1_READ_CNT 0x39
+ #define MIFARE_ULEV1_INCR_CNT 0xA5
+ #define MIFARE_ULEV1_READSIG 0x3C
+ #define MIFARE_ULEV1_CHECKTEAR 0x3E
+ #define MIFARE_ULEV1_VCSL 0x4B
/**
06 00 = INITIATE
#define ISO15693_READ_MULTI_SECSTATUS 0x2C
-#define ISO_14443A 0
-#define ICLASS 1
-#define ISO_14443B 2
+// Topaz command set:
+#define TOPAZ_REQA 0x26 // Request
+#define TOPAZ_WUPA 0x52 // WakeUp
+#define TOPAZ_RID 0x78 // Read ID
+#define TOPAZ_RALL 0x00 // Read All (all bytes)
+#define TOPAZ_READ 0x01 // Read (a single byte)
+#define TOPAZ_WRITE_E 0x53 // Write-with-erase (a single byte)
+#define TOPAZ_WRITE_NE 0x1a // Write-no-erase (a single byte)
+// additional commands for Dynamic Memory Model
+#define TOPAZ_RSEG 0x10 // Read segment
+#define TOPAZ_READ8 0x02 // Read (eight bytes)
+#define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes)
+#define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes)
+
+
+#define ISO_14443A 0
+#define ICLASS 1
+#define ISO_14443B 2
+#define TOPAZ 3
//-- Picopass fuses
#define FUSE_FPERS 0x80
projects / proxmark3-svn / commitdiff