From: Martin Holst Swende Date: Mon, 31 Mar 2014 15:57:14 +0000 (+0200) Subject: Refactoring low frequency operations, now 'lf hid fskdemod' is more stable. Also... X-Git-Tag: v2.0.0-rc1~87^2~1^2~4 X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/commitdiff_plain/07976a256df582dbaf8b51a414e1a0c2188d06fb?ds=inline;hp=-c Refactoring low frequency operations, now 'lf hid fskdemod' is more stable. Also did changes to handling ioprox tags, this is yet untested, so until it's been tested it should be kept off 'stable' branch --- 07976a256df582dbaf8b51a414e1a0c2188d06fb diff --git a/armsrc/lfops.c b/armsrc/lfops.c index 072961a2..397ea847 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -605,55 +605,16 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol) if (ledcontrol) LED_A_OFF(); } -void setup_for_125khz() -{ - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); - - // Connect the A/D to the peak-detected low-frequency path. - SetAdcMuxFor(GPIO_MUXSEL_LOPKD); - - // Give it a bit of time for the resonant antenna to settle. - SpinDelay(50); - - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); - -} -void get_samples(int ledcontrol, uint8_t* dest, int size) -{ - int i = 0; - - memset(dest,128,size); - for(;;) { - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { - AT91C_BASE_SSC->SSC_THR = 0x43; - if (ledcontrol) LED_D_ON(); - } - if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { - dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR; - // we don't care about actual value, only if it's more or less than a - // threshold essentially we capture zero crossings for later analysis - if(dest[i] < 127) dest[i] = 0; else dest[i] = 1; - i++; - if (ledcontrol) LED_D_OFF(); - if(i >= size) { - break; - } - } - } -} -uint8_t fsk_demod(uint8_t * dest, int size) +size_t fsk_demod(uint8_t * dest, size_t size) { - uint8_t last_transition = 0; - uint8_t idx = 1; + uint32_t last_transition = 0; + uint32_t idx = 1; // we don't care about actual value, only if it's more or less than a // threshold essentially we capture zero crossings for later analysis uint8_t threshold_value = 127; - WDT_HIT(); // sync to first lo-hi transition, and threshold @@ -661,12 +622,11 @@ uint8_t fsk_demod(uint8_t * dest, int size) if(dest[0] < threshold_value) dest[0] = 0; else dest[0] = 1; - uint8_t numBits = 0; + size_t numBits = 0; // count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8) // or 10 (fc/10) cycles but in practice due to noise etc we may end up with with anywhere // between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10 for(idx = 1; idx < size; idx++) { - // threshold current value if (dest[idx] < threshold_value) dest[idx] = 0; else dest[idx] = 1; @@ -686,12 +646,13 @@ uint8_t fsk_demod(uint8_t * dest, int size) return numBits; //Actually, it returns the number of bytes, but each byte represents a bit: 1 or 0 } -uint8_t aggregate_bits(uint8_t *dest,uint8_t size, uint8_t h2l_crossing_value,uint8_t l2h_crossing_value, uint8_t maxConsequtiveBits ) + +size_t aggregate_bits(uint8_t *dest,size_t size, uint8_t h2l_crossing_value,uint8_t l2h_crossing_value, uint8_t maxConsequtiveBits ) { uint8_t lastval=dest[0]; - uint8_t idx=0; - uint8_t numBits=0; - uint8_t n=1, i=0; + uint32_t idx=0; + size_t numBits=0; + uint32_t n=1; for( idx=1; idx < size; idx++) { @@ -700,14 +661,16 @@ uint8_t aggregate_bits(uint8_t *dest,uint8_t size, uint8_t h2l_crossing_value,ui continue; } //if lastval was 1, we have a 1->0 crossing - if ( lastval ) { - n=(n+1)/7; + if ( dest[idx-1] ) { + n=(n+1) / h2l_crossing_value; } else {// 0->1 crossing - n=(n+1)/6; + n=(n+1) / l2h_crossing_value; } - if(n < 13) + if (n == 0) n = 1; + + if(n < maxConsequtiveBits) { - memset(dest+i, lastval ^ 1, n); + memset(dest+numBits, dest[idx-1] , n); numBits += n; } n=0; @@ -722,34 +685,26 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) { uint8_t *dest = (uint8_t *)BigBuf; - int size=0, idx=0, found=0; + size_t size=0,idx=0; //, found=0; uint32_t hi2=0, hi=0, lo=0; - // Configure to go in 125Khz listen mode - SetupToAcquireRawAdcSamples(0); - for(;;) { - WDT_HIT(); - if (ledcontrol) - LED_A_ON(); - if(BUTTON_PRESS()) { - DbpString("Stopped"); - if (ledcontrol) - LED_A_OFF(); - return; - } + while(!BUTTON_PRESS()) { + // Configure to go in 125Khz listen mode + SetupToAcquireRawAdcSamples(0); + + WDT_HIT(); + if (ledcontrol) LED_A_ON(); DoAcquisition125k_internal(true); size = sizeof(BigBuf); // FSK demodulator size = fsk_demod(dest, size); - WDT_HIT(); // we now have a set of cycle counts, loop over previous results and aggregate data into bit patterns - // 1->0 : fc/8 in sets of 6 // 0->1 : fc/10 in sets of 5 size = aggregate_bits(dest,size, 6,5,5); @@ -759,36 +714,32 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) // final loop, go over previously decoded manchester data and decode into usable tag ID // 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0 uint8_t frame_marker_mask[] = {1,1,1,0,0,0}; + int numshifts = 0; + idx = 0; + while( idx + sizeof(frame_marker_mask) < size) { + // search for a start of frame marker + if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0) + { // frame marker found + idx+=sizeof(frame_marker_mask); - for( idx=0; idx < size-sizeof(frame_marker_mask); idx++) { - - if (found) { - if(dest[idx] == dest[idx+1]) - {// 1 1 or 00 - found=0; - hi2=0; - hi=0; - lo=0; - }else - { - //Shift in a bit. Start by shifting high registers + while(dest[idx] != dest[idx+1] && idx < size-2) + { // Keep going until next frame marker (or error) + // Shift in a bit. Start by shifting high registers hi2 = (hi2<<1)|(hi>>31); hi = (hi<<1)|(lo>>31); //Then, shift in a 0 or one into low if (dest[idx] && !dest[idx+1]) // 1 0 lo=(lo<<1)|0; else // 0 1 - lo=(lo<<1)|1; + lo=(lo<<1)| + 1; + numshifts ++; + idx += 2; } - idx++; - } - - // search for a start of frame marker - if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0) - { // Found start of frame marker - found=1; - idx+=sizeof(frame_marker_mask); - if (found && (hi2|hi|lo)) { + //Dbprintf("Num shifts: %d ", numshifts); + // Hopefully, we read a tag and hit upon the next frame marker + if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0) + { if (hi2 != 0){ Dbprintf("TAG ID: %x%08x%08x (%d)", (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); @@ -797,22 +748,21 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) Dbprintf("TAG ID: %x%08x (%d)", (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); } - /* if we're only looking for one tag */ - if (findone) - { - *high = hi; - *low = lo; - return; - } - hi2=0; - hi=0; - lo=0; - found=0; } + + // reset + hi2 = hi = lo = 0; + numshifts = 0; + }else + { + idx++; } } WDT_HIT(); + } + DbpString("Stopped"); + if (ledcontrol) LED_A_OFF(); } uint32_t bytebits_to_byte(uint8_t* src, int numbits) @@ -830,22 +780,18 @@ uint32_t bytebits_to_byte(uint8_t* src, int numbits) void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) { uint8_t *dest = (uint8_t *)BigBuf; - int size=0, idx=0; + + size_t size=0, idx=0; uint32_t code=0, code2=0; - //uint32_t hi2=0, hi=0, lo=0; - setup_for_125khz(); - for(;;) { + while(!BUTTON_PRESS()) { + + // Configure to go in 125Khz listen mode + SetupToAcquireRawAdcSamples(0); + WDT_HIT(); - if (ledcontrol) - LED_A_ON(); - if(BUTTON_PRESS()) { - DbpString("Stopped"); - if (ledcontrol) - LED_A_OFF(); - return; - } + if (ledcontrol) LED_A_ON(); DoAcquisition125k_internal(true); size = sizeof(BigBuf); @@ -853,6 +799,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) // FSK demodulator size = fsk_demod(dest, size); WDT_HIT(); + // we now have a set of cycle counts, loop over previous results and aggregate data into bit patterns // 1->0 : fc/8 in sets of 7 // 0->1 : fc/10 in sets of 6 @@ -860,6 +807,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) WDT_HIT(); + //Handle the data uint8_t mask[] = {0,0,0,0,0,0,0,0,0,1}; for( idx=0; idx < size - 64; idx++) { @@ -890,8 +838,10 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) return; } } + WDT_HIT(); } - WDT_HIT(); + DbpString("Stopped"); + if (ledcontrol) LED_A_OFF(); } /*------------------------------ diff --git a/client/proxmark3.c b/client/proxmark3.c index 528cae34..bf0f3817 100644 --- a/client/proxmark3.c +++ b/client/proxmark3.c @@ -47,7 +47,11 @@ void SendCommand(UsbCommand *c) { PrintAndLog("Sending bytes to proxmark failed - offline"); return; } - + /** + The while-loop below causes hangups at times, when the pm3 unit is unresponsive + or disconnected. The main console thread is alive, but comm thread just spins here. + Not good.../holiman + **/ while(txcmd_pending); txcmd = *c; txcmd_pending = true;