From: Iceman Date: Sun, 26 Nov 2017 05:15:48 +0000 (+0100) Subject: Merge pull request #494 from qaisjp/patch-1 X-Git-Tag: v3.1.0~116 X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/commitdiff_plain/14971507b18dce66fd5c1b03d808b4bf684928e5?hp=45eb1383e3029d887549161b4125f33550c23de6 Merge pull request #494 from qaisjp/patch-1 Make README file markdown --- diff --git a/README.md b/README.md new file mode 100644 index 00000000..7258f918 --- /dev/null +++ b/README.md @@ -0,0 +1,74 @@ +# proxmark3: the official Proxmark repository! + +The proxmark3 is a powerful general purpose RFID tool, the size of a deck +of cards, designed to snoop, listen and emulate everything from +**Low Frequency (125kHz)** to **High Frequency (13.56MHz)** tags. + +This repository contains enough software, logic (for the FPGA), and design +documentation for the hardware that you could, at least in theory, +do something useful with a proxmark3. + +## Resources + +* [This repository!](https://github.com/Proxmark/proxmark3) +* [The Wiki](https://github.com/Proxmark/proxmark3/wiki) +* [The GitHub Pages website](http://proxmark.github.io/proxmark3/) +* [The Forum](http://www.proxmark.org/forum) +* The IRC channel: irc.freenode.org #proxmark3 ([chat in your browser](http://webchat.freenode.net/?channels=#proxmark3)) +* [The Homebrew formula repository](https://github.com/Proxmark/homebrew-proxmark3) + +## Development + +The tools required to build or run the project will vary depending on +your operating system. Please refer to [the wiki](https://github.com/Proxmark/proxmark3/wiki) for details. + +## Obtaining hardware + +The Proxmark3 is available for purchase (assembled and tested) from the +following locations: + +* [RyscCorp](https://proxmark3.com/) (US) +* [Elechouse](http://www.elechouse.com/) (HK) +* [Lab401](https://lab401.com/) (FR) +* [RFxSecure](http://www.rfxsecure.com/) (SG) +* [IceSQL](http://proxmark3.tictail.com/) (SE) + +Most of the ultra-low-volume contract assemblers could put +something like this together with a reasonable yield. A run of around +a dozen units is probably cost-effective. The BOM includes (possibly- +outdated) component pricing, and everything is available from Digikey +and the usual distributors. + +If you've never assembled a modern circuit board by hand, then this is +not a good place to start. Some of the components (e.g. the crystals) +must not be assembled with a soldering iron, and require hot air. + +The schematics are included; the component values given are not +necessarily correct for all situations, but it should be possible to do +nearly anything you would want with appropriate population options. + +The printed circuit board artwork is also available, as Gerbers and an +Excellon drill file. + + +## License + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + +Jonathan Westhues +user jwesthues, at host cq.cx + +May 2007, Cambridge MA diff --git a/README.txt b/README.txt deleted file mode 100644 index c8cac497..00000000 --- a/README.txt +++ /dev/null @@ -1,93 +0,0 @@ -NOTICE: -(2014-03-26) -This is now the official Proxmark repository! - -INTRODUCTION: - -The proxmark3 is a powerful general purpose RFID tool, the size of a deck -of cards, designed to snoop, listen and emulate everything from -Low Frequency (125kHz) to High Frequency (13.56MHz) tags. - -This repository contains enough software, logic (for the FPGA), and design -documentation for the hardware that you could, at least in theory, -do something useful with a proxmark3. - -RESOURCES: - - * This repository! - https://github.com/Proxmark/proxmark3 - - * The Wiki - https://github.com/Proxmark/proxmark3/wiki - - * The GitHub page - http://proxmark.github.io/proxmark3/ - - * The Forum - http://www.proxmark.org/forum - - * The IRC chanel - irc.freenode.org #proxmark3 - -or- - http://webchat.freenode.net/?channels=#proxmark3 - - * The Homebrew formula repository - https://github.com/Proxmark/homebrew-proxmark3 - -DEVELOPMENT: - -The tools required to build or run the project will vary depending on -your operating system. Please refer to the Wiki for details. - - * https://github.com/Proxmark/proxmark3/wiki - -OBTAINING HARDWARE: - -The Proxmark3 is available for purchase (assembled and tested) from the -following locations: - - * https://proxmark3.com/ - RyscCorp (us) - * http://www.elechouse.com/ - Elechouse (HK) - * https://lab401.com/ - Lab401 (FR) - * http://www.rfxsecure.com/ - RFxSecure (SG) - * http://proxmark3.tictail.com/ - IceSQL (SE) - -Most of the ultra-low-volume contract assemblers could put -something like this together with a reasonable yield. A run of around -a dozen units is probably cost-effective. The BOM includes (possibly- -outdated) component pricing, and everything is available from Digikey -and the usual distributors. - -If you've never assembled a modern circuit board by hand, then this is -not a good place to start. Some of the components (e.g. the crystals) -must not be assembled with a soldering iron, and require hot air. - -The schematics are included; the component values given are not -necessarily correct for all situations, but it should be possible to do -nearly anything you would want with appropriate population options. - -The printed circuit board artwork is also available, as Gerbers and an -Excellon drill file. - - -LICENSING: - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - - -Jonathan Westhues -user jwesthues, at host cq.cx - -May 2007, Cambridge MA