From: iceman1001 Date: Fri, 23 Sep 2016 14:35:26 +0000 (+0200) Subject: FIX: This commit fixes the broken LF since I change the spindelay calls. The origin... X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/commitdiff_plain/24c49d36ba3ea8acb9be21bdbb51503969a5a113 FIX: This commit fixes the broken LF since I change the spindelay calls. The original problem is that spindelayus calls is incremented with21.3us each step, making it very hard to find exact timings found in the datasheets for T55x7, HID etcetc. When @marshmellow and I looked into this 2014, I had this on my back of my mind but forgot it since I didn't know how the source code / pm3 worked. This behavior in spindelayus has given the bit-period for ON/OFF measured in (us) very hard to find. Its kind of magic that it worked so far so good. Well until I started to look into the "hf legic" bitbanging ASK ON/OFF keying and that one needs a much more precis timer. Same goes for the PCF7931 code. I've added a precise timer in the new files ticks.c and moved some older stuff from util.c to have a solid base for this. UNTESTED, and the timings measured for t55x7 in lfops.c and other parts has not been adjusted to this "correct" timer. --- diff --git a/armsrc/lfops.c b/armsrc/lfops.c index 9290007c..ab86f931 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -60,19 +60,19 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t periods, uint3 while(*command != '\0' && *command != ' ') { FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); - SpinDelayUs(delay_off); + WaitUS(delay_off); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); LED_D_ON(); if(*(command++) == '0') - SpinDelayUs(period_0); // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(period_0); else - SpinDelayUs(period_1); // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(period_1); } FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); - SpinDelayUs(delay_off); // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(delay_off); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); @@ -225,20 +225,20 @@ void WriteTIbyte(uint8_t b) // modulate 8 bits out to the antenna for (i=0; i<8; i++) { - if (b&(1<> 10); - // where to save it - - SpinDelayCountUs(delay); // ICEMAN: problem with (us) clock is 21.3us increments + + // Give it a bit of time for the resonant antenna to settle. + WaitUS(delay); } // Write one bit to card @@ -1154,7 +1153,7 @@ void T55xxWriteBit(int bit) { else TurnReadLFOn(WRITE_1); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelayCountUs(WRITE_GAP); // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(WRITE_GAP); } // Send T5577 reset command then read stream (see if we can identify the start of the stream) @@ -1168,7 +1167,7 @@ void T55xxResetRead(void) { // Trigger T55x7 in mode. FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelayCountUs(START_GAP); // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(START_GAP); // reset tag - op code 00 T55xxWriteBit(0); @@ -1198,7 +1197,7 @@ void T55xxWriteBlockExt(uint32_t Data, uint8_t Block, uint32_t Pwd, uint8_t arg) // Trigger T55x7 in mode. FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelayCountUs(START_GAP); // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(START_GAP); // Opcode 10 T55xxWriteBit(1); @@ -1258,7 +1257,7 @@ void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) { // Trigger T55x7 Direct Access Mode with start gap FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelayCountUs(START_GAP); // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(START_GAP); // Opcode 1[page] T55xxWriteBit(1); @@ -1298,7 +1297,7 @@ void T55xxWakeUp(uint32_t Pwd){ // Trigger T55x7 Direct Access Mode FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelayCountUs(START_GAP); // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(START_GAP); // Opcode 10 T55xxWriteBit(1); @@ -1629,20 +1628,20 @@ void SendForward(uint8_t fwd_bit_count) { fwd_bit_sz--; //prepare next bit modulation fwd_write_ptr++; FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off - SpinDelayUs(55*8); //55 cycles off (8us each)for 4305 // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(55*8); //55 cycles off (8us each)for 4305 // ICEMAN: problem with (us) clock is 21.3us increments FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on - SpinDelayUs(16*8); //16 cycles on (8us each) // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(16*8); //16 cycles on (8us each) // ICEMAN: problem with (us) clock is 21.3us increments // now start writting while(fwd_bit_sz-- > 0) { //prepare next bit modulation if(((*fwd_write_ptr++) & 1) == 1) - SpinDelayUs(32*8); //32 cycles at 125Khz (8us each) // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(32*8); //32 cycles at 125Khz (8us each) // ICEMAN: problem with (us) clock is 21.3us increments else { //These timings work for 4469/4269/4305 (with the 55*8 above) FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off - SpinDelayUs(23*8); //16-4 cycles off (8us each) // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(23*8); //16-4 cycles off (8us each) // ICEMAN: problem with (us) clock is 21.3us increments FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on - SpinDelayUs(9*8); //16 cycles on (8us each) // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(9*8); //16 cycles on (8us each) // ICEMAN: problem with (us) clock is 21.3us increments } } } diff --git a/armsrc/lfsampling.c b/armsrc/lfsampling.c index 8a6e6b05..a272e153 100644 --- a/armsrc/lfsampling.c +++ b/armsrc/lfsampling.c @@ -6,17 +6,11 @@ // Miscellaneous routines for low frequency sampling. //----------------------------------------------------------------------------- -#include "proxmark3.h" -#include "apps.h" -#include "util.h" -#include "string.h" -#include "usb_cdc.h" // for usb_poll_validate_length #include "lfsampling.h" sample_config config = { 1, 8, 1, 95, 0 } ; -void printConfig() -{ +void printConfig() { Dbprintf("LF Sampling config: "); Dbprintf(" [q] divisor: %d ", config.divisor); Dbprintf(" [b] bps: %d ", config.bits_per_sample); @@ -37,8 +31,7 @@ void printConfig() * @brief setSamplingConfig * @param sc */ -void setSamplingConfig(sample_config *sc) -{ +void setSamplingConfig(sample_config *sc) { if(sc->divisor != 0) config.divisor = sc->divisor; if(sc->bits_per_sample != 0) config.bits_per_sample = sc->bits_per_sample; if(sc->decimation != 0) config.decimation = sc->decimation; @@ -51,8 +44,7 @@ void setSamplingConfig(sample_config *sc) printConfig(); } -sample_config* getSamplingConfig() -{ +sample_config* getSamplingConfig() { return &config; } @@ -67,8 +59,7 @@ typedef struct { * @param stream * @param bit */ -void pushBit( BitstreamOut* stream, uint8_t bit) -{ +void pushBit( BitstreamOut* stream, uint8_t bit) { int bytepos = stream->position >> 3; // divide by 8 int bitpos = stream->position & 7; *(stream->buffer+bytepos) |= (bit > 0) << (7 - bitpos); @@ -83,8 +74,7 @@ void pushBit( BitstreamOut* stream, uint8_t bit) * 0 or 95 ==> 125 KHz * **/ -void LFSetupFPGAForADC(int divisor, bool lf_field) -{ +void LFSetupFPGAForADC(int divisor, bool lf_field) { FpgaDownloadAndGo(FPGA_BITSTREAM_LF); if ( (divisor == 1) || (divisor < 0) || (divisor > 255) ) FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz @@ -101,6 +91,9 @@ void LFSetupFPGAForADC(int divisor, bool lf_field) SpinDelay(50); // Now set up the SSC to get the ADC samples that are now streaming at us. FpgaSetupSsc(); + + // start a 1.5ticks is 1us + StartTicks(); } /** @@ -118,8 +111,7 @@ void LFSetupFPGAForADC(int divisor, bool lf_field) * @param silent - is true, now outputs are made. If false, dbprints the status * @return the number of bits occupied by the samples. */ -uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averaging, int trigger_threshold,bool silent) -{ +uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averaging, int trigger_threshold,bool silent) { //bigbuf, to hold the aquired raw data signal uint8_t *dest = BigBuf_get_addr(); uint16_t bufsize = BigBuf_max_traceLen(); @@ -210,12 +202,10 @@ uint32_t DoAcquisition(uint8_t decimation, uint32_t bits_per_sample, bool averag * @param silent * @return number of bits sampled */ -uint32_t DoAcquisition_default(int trigger_threshold, bool silent) -{ +uint32_t DoAcquisition_default(int trigger_threshold, bool silent) { return DoAcquisition(1,8,0,trigger_threshold,silent); } -uint32_t DoAcquisition_config( bool silent) -{ +uint32_t DoAcquisition_config( bool silent) { return DoAcquisition(config.decimation ,config.bits_per_sample ,config.averaging @@ -223,11 +213,10 @@ uint32_t DoAcquisition_config( bool silent) ,silent); } -uint32_t ReadLF(bool activeField, bool silent) -{ - if (!silent) printConfig(); +uint32_t ReadLF(bool activeField, bool silent) { + if (!silent) + printConfig(); LFSetupFPGAForADC(config.divisor, activeField); - // Now call the acquisition routine return DoAcquisition_config(silent); } @@ -235,8 +224,7 @@ uint32_t ReadLF(bool activeField, bool silent) * Initializes the FPGA for reader-mode (field on), and acquires the samples. * @return number of bits sampled **/ -uint32_t SampleLF(bool printCfg) -{ +uint32_t SampleLF(bool printCfg) { return ReadLF(true, printCfg); } /** @@ -253,23 +241,22 @@ uint32_t SnoopLF() { **/ void doT55x7Acquisition(size_t sample_size) { - #define T55xx_READ_UPPER_THRESHOLD 128+60 // 60 grph - #define T55xx_READ_LOWER_THRESHOLD 128-60 // -60 grph - #define T55xx_READ_TOL 5 - + #define T55xx_READ_UPPER_THRESHOLD 128+40 // 60 grph + #define T55xx_READ_LOWER_THRESHOLD 128-40 // -60 grph + #define T55xx_READ_TOL 2 + uint8_t *dest = BigBuf_get_addr(); uint16_t bufsize = BigBuf_max_traceLen(); if ( bufsize > sample_size ) bufsize = sample_size; - uint16_t i = 0; + uint8_t curSample = 0, lastSample = 0; + uint16_t i = 0, skipCnt = 0; bool startFound = false; bool highFound = false; bool lowFound = false; - uint8_t curSample = 0; - uint8_t lastSample = 0; - uint16_t skipCnt = 0; + while(!BUTTON_PRESS() && !usb_poll_validate_length() && skipCnt < 1000 && (i < bufsize) ) { WDT_HIT(); if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) { @@ -301,7 +288,7 @@ void doT55x7Acquisition(size_t sample_size) { // skip until first high samples begin to change - if (startFound || curSample > T55xx_READ_LOWER_THRESHOLD+T55xx_READ_TOL){ + if (startFound || curSample > T55xx_READ_LOWER_THRESHOLD + T55xx_READ_TOL){ // if just found start - recover last sample if (!startFound) { dest[i++] = lastSample; diff --git a/armsrc/lfsampling.h b/armsrc/lfsampling.h index bd8ad1d0..cf1bb45d 100644 --- a/armsrc/lfsampling.h +++ b/armsrc/lfsampling.h @@ -1,6 +1,13 @@ #ifndef LFSAMPLING_H #define LFSAMPLING_H +#include "proxmark3.h" +#include "apps.h" +#include "util.h" +#include "string.h" +#include "usb_cdc.h" // for usb_poll_validate_length +#include "ticks.h" // for StartTicks + /** * acquisition of T55x7 LF signal. Similart to other LF, but adjusted with @marshmellows thresholds * the data is collected in BigBuf. diff --git a/armsrc/ticks.c b/armsrc/ticks.c index 43b006ff..4aaa9c98 100644 --- a/armsrc/ticks.c +++ b/armsrc/ticks.c @@ -48,7 +48,6 @@ void SpinDelay(int ms) { // SpinDelay(1000); // ti = GetTickCount() - ti; // Dbprintf("timer(1s): %d t=%d", ti, GetTickCount()); - void StartTickCount() { // This timer is based on the slow clock. The slow clock frequency is between 22kHz and 40kHz. // We can determine the actual slow clock frequency by looking at the Main Clock Frequency Register. @@ -88,7 +87,7 @@ void StartCountUS() { AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; AT91C_BASE_TCB->TCB_BCR = 1; - while (AT91C_BASE_TC1->TC_CV >= 1); + while (AT91C_BASE_TC1->TC_CV > 1); } uint32_t RAMFUNC GetCountUS(){ @@ -100,22 +99,9 @@ void ResetUSClock(void) { //enable clock of timer and software trigger AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; - while (AT91C_BASE_TC1->TC_CV >= 1); + while (AT91C_BASE_TC1->TC_CV > 1); } -// attempt at high resolution microsecond timer -// beware: timer counts in 21.3uS increments (1024/48Mhz) -void SpinDelayCountUs(uint32_t us) { - if (us < 8) return; - us += GetCountUS(); - while ( GetCountUS() < us ){} -} -// static uint32_t GlobalUsCounter = 0; -// uint32_t RAMFUNC GetDeltaCountUS(){ - // uint32_t g_cnt = GetCountUS(); - // uint32_t g_res = g_cnt - GlobalUsCounter; - // GlobalUsCounter = g_cnt; - // return g_res; -// } + // ------------------------------------------------------------------------- // Timer for iso14443 commands. Uses ssp_clk from FPGA // ------------------------------------------------------------------------- @@ -174,7 +160,7 @@ void StartCountSspClk() { // The high word of the counter (TC2) will not reset until the low word (TC0) overflows. // Therefore need to wait quite some time before we can use the counter. - while (AT91C_BASE_TC2->TC_CV >= 1); + while (AT91C_BASE_TC2->TC_CV > 1); } void ResetSspClk(void) { //enable clock of timer and software trigger @@ -192,17 +178,16 @@ uint32_t RAMFUNC GetCountSspClk(){ } +// ------------------------------------------------------------------------- +// Timer for bitbanging, or LF stuff when you need a very precis timer +// 1us = 1.5ticks +// ------------------------------------------------------------------------- void StartTicks(void){ //initialization of the timer AT91C_BASE_PMC->PMC_PCER |= (1 << 12) | (1 << 13) | (1 << 14); AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_TIOA0 | AT91C_TCB_TC2XC2S_NONE; - - // fast clock TC0 - // tick=1.5mks - AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; // timer disable + AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; AT91C_BASE_TC0->TC_CMR = AT91C_TC_CLKS_TIMER_DIV3_CLOCK; //clock at 48/32 MHz - - // Enable and reset timer AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; AT91C_BASE_TCB->TCB_BCR = 1; // wait until timer becomes zero.