From: jmorsch Date: Thu, 11 Jul 2019 17:01:36 +0000 (-0400) Subject: whitespace cleaning X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/commitdiff_plain/347efc12741e72e6ce3a3c4f3ed554fae0cefc73?ds=sidebyside;hp=--cc whitespace cleaning --- 347efc12741e72e6ce3a3c4f3ed554fae0cefc73 diff --git a/armsrc/lfops.c b/armsrc/lfops.c index ed83df48..c9947d97 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -1264,7 +1264,7 @@ T55xx_Timing T55xx_Timing_1of4 = { 31 * 8 , 20 * 8 , 18 * 8 , 34 * 8 , 5 #define T55xx_DLMode_Fixed 0 // Default Mode #define T55xx_DLMode_LLR 1 // Long Leading Reference #define T55xx_DLMode_Leading0 2 // Leading Zero -#define T55xx_DLMode_1of4 3 // 1 of 4 +#define T55xx_DLMode_1of4 3 // 1 of 4 #define T55xx_LongLeadingReference 4 // Value to tell Write Bit to send long reference // Macro for code readability #define BitStream_Byte(X) ((X) >> 3) @@ -1281,14 +1281,14 @@ void TurnReadLFOn(int delay) { void T55xxWriteBit(int bit, T55xx_Timing *Timings) { // If bit = 4 Send Long Leading Reference which is 138 + WRITE_0 - // Dbprintf ("Bits : %d",bit); + // Dbprintf ("Bits : %d",bit); switch (bit){ case 0 : TurnReadLFOn(Timings->WRITE_0); break; // Send bit 0/00 case 1 : TurnReadLFOn(Timings->WRITE_1); break; // Send bit 1/01 case 2 : TurnReadLFOn(Timings->WRITE_2); break; // Send bits 10 - case 3 : TurnReadLFOn(Timings->WRITE_3); break; // Send bits 11 - case 4 : TurnReadLFOn(Timings->WRITE_0 + (136 * 8)); break; // Send Long Leading Reference - } + case 3 : TurnReadLFOn(Timings->WRITE_3); break; // Send bits 11 + case 4 : TurnReadLFOn(Timings->WRITE_0 + (136 * 8)); break; // Send Long Leading Reference + } FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); WaitUS(Timings->WRITE_GAP); } @@ -1303,31 +1303,31 @@ void T55xxWriteBit(int bit, T55xx_Timing *Timings) { //int T55xx_SetBits (uint8_t *bit_array, int start_offset, uint32_t data , int num_bits, int max_len) int T55xx_SetBits (uint8_t *BitStream, uint8_t start_offset, uint32_t data , uint8_t num_bits, uint8_t max_len) { - int8_t offset; - int8_t NextOffset = start_offset; - - // Check if data will fit. - if ((start_offset + num_bits) <= (max_len*8)) { - // Loop through the data and store - for (offset = (num_bits-1); offset >= 0; offset--) { - - if ((data >> offset) & 1) BitStream[BitStream_Byte(NextOffset)] |= (1 << BitStream_Bit(NextOffset)); // Set the bit to 1 - else BitStream[BitStream_Byte(NextOffset)] &= (0xff ^ (1 << BitStream_Bit(NextOffset))); // Set the bit to 0 - - NextOffset++; - } - } - else{ - // Note: This should never happen unless some code changes cause it. - // So short message for coders when testing. - Dbprintf ("T55 too many bits"); - } - return NextOffset; + int8_t offset; + int8_t NextOffset = start_offset; + + // Check if data will fit. + if ((start_offset + num_bits) <= (max_len*8)) { + // Loop through the data and store + for (offset = (num_bits-1); offset >= 0; offset--) { + + if ((data >> offset) & 1) BitStream[BitStream_Byte(NextOffset)] |= (1 << BitStream_Bit(NextOffset)); // Set the bit to 1 + else BitStream[BitStream_Byte(NextOffset)] &= (0xff ^ (1 << BitStream_Bit(NextOffset))); // Set the bit to 0 + + NextOffset++; + } + } + else { + // Note: This should never happen unless some code changes cause it. + // So short message for coders when testing. + Dbprintf ("T55 too many bits"); + } + return NextOffset; } // Send one downlink command to the card void T55xx_SendCMD (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { - + /* arg bits xxxxxxx1 0x01 PwdMode @@ -1337,32 +1337,32 @@ void T55xx_SendCMD (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { xx1xxxxx 0x20 !reg_readmode x1xxxxxx 0x40 called for a read, so no data packet 1xxxxxxx 0x80 reset - + */ - bool PwdMode = ((arg & 0x01) == 0x01); - bool Page = (arg & 0x02); - bool testMode = ((arg & 0x04) == 0x04); - uint8_t downlink_mode = (arg >> 3) & 0x03; - bool reg_readmode = ((arg & 0x20) == 0x20); - bool read_cmd = ((arg & 0x40) == 0x40); - bool reset = (arg & 0x80); - - uint8_t i = 0; + bool PwdMode = ((arg & 0x01) == 0x01); + bool Page = (arg & 0x02); + bool testMode = ((arg & 0x04) == 0x04); + uint8_t downlink_mode = (arg >> 3) & 0x03; + bool reg_readmode = ((arg & 0x20) == 0x20); + bool read_cmd = ((arg & 0x40) == 0x40); + bool reset = (arg & 0x80); + + uint8_t i = 0; uint8_t BitStream[10]; // Max Downlink Command size ~74 bits, so 10 bytes (80 bits) uint8_t BitStreamLen; T55xx_Timing *Timing; uint8_t SendBits; - + // Assigning Downlink Timeing for write switch (downlink_mode) { case T55xx_DLMode_Fixed : Timing = &T55xx_Timing_FixedBit; break; - case T55xx_DLMode_LLR : Timing = &T55xx_Timing_LLR; break; + case T55xx_DLMode_LLR : Timing = &T55xx_Timing_LLR; break; case T55xx_DLMode_Leading0 : Timing = &T55xx_Timing_Leading0; break; case T55xx_DLMode_1of4 : Timing = &T55xx_Timing_1of4; break; default: Timing = &T55xx_Timing_FixedBit; - } + } // Build Bit Stream to send. memset (BitStream,0x00,sizeof(BitStream)); @@ -1370,42 +1370,42 @@ void T55xx_SendCMD (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { BitStreamLen = 0; // Ensure 0 bit index to start. // Add Leading 0 and 1 of 4 reference bit - if ((downlink_mode == T55xx_DLMode_Leading0) || (downlink_mode == T55xx_DLMode_1of4)) + if ((downlink_mode == T55xx_DLMode_Leading0) || (downlink_mode == T55xx_DLMode_1of4)) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream)); // Add extra reference 0 for 1 of 4 - if (downlink_mode == T55xx_DLMode_1of4) + if (downlink_mode == T55xx_DLMode_1of4) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream)); // Add Opcode - if (reset) { - // Reset : r*) 00 - BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 2,sizeof(BitStream)); - } - else - { - if (testMode) Dbprintf("TestMODE"); - BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 0 : 1 , 1,sizeof(BitStream)); - BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 1 : Page , 1,sizeof(BitStream)); - - if (PwdMode) { - // Leading 0 and 1 of 4 00 fixed bits if passsword used - if ((downlink_mode == T55xx_DLMode_Leading0) || (downlink_mode == T55xx_DLMode_1of4)) { - BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 2,sizeof(BitStream)); - } - BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Pwd, 32,sizeof(BitStream)); - } - - // Add Lock bit 0 - if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream)); - - // Add Data if a write command - if (!read_cmd) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Data, 32,sizeof(BitStream)); - - // Add Address - if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Block, 3,sizeof(BitStream)); - } - + if (reset) { + // Reset : r*) 00 + BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 2,sizeof(BitStream)); + } + else + { + if (testMode) Dbprintf("TestMODE"); + BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 0 : 1 , 1,sizeof(BitStream)); + BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 1 : Page , 1,sizeof(BitStream)); + + if (PwdMode) { + // Leading 0 and 1 of 4 00 fixed bits if passsword used + if ((downlink_mode == T55xx_DLMode_Leading0) || (downlink_mode == T55xx_DLMode_1of4)) { + BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 2,sizeof(BitStream)); + } + BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Pwd, 32,sizeof(BitStream)); + } + + // Add Lock bit 0 + if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream)); + + // Add Data if a write command + if (!read_cmd) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Data, 32,sizeof(BitStream)); + + // Add Address + if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Block, 3,sizeof(BitStream)); + } + // Send Bits to T55xx // Set up FPGA, 125kHz LFSetupFPGAForADC(95, true); @@ -1420,18 +1420,18 @@ void T55xx_SendCMD (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { if (downlink_mode == T55xx_DLMode_LLR) T55xxWriteBit (T55xx_LongLeadingReference,Timing); // Send Long Leading Start Reference - if ((downlink_mode == T55xx_DLMode_1of4) && (BitStreamLen > 0)) { // 1 of 4 need to send 2 bits at a time + if ((downlink_mode == T55xx_DLMode_1of4) && (BitStreamLen > 0)) { // 1 of 4 need to send 2 bits at a time for ( i = 0; i < BitStreamLen-1; i+=2 ) { SendBits = (BitStream[BitStream_Byte(i )] >> (BitStream_Bit(i )) & 1) << 1; // Bit i - SendBits += (BitStream[BitStream_Byte(i+1)] >> (BitStream_Bit(i+1)) & 1); // Bit i+1; + SendBits += (BitStream[BitStream_Byte(i+1)] >> (BitStream_Bit(i+1)) & 1); // Bit i+1; T55xxWriteBit (SendBits & 3,Timing); } } else { for (i = 0; i < BitStreamLen; i++) { - SendBits = (BitStream[BitStream_Byte(i)] >> BitStream_Bit(i)); + SendBits = (BitStream[BitStream_Byte(i)] >> BitStream_Bit(i)); T55xxWriteBit (SendBits & 1,Timing); - } + } } } @@ -1439,11 +1439,11 @@ void T55xx_SendCMD (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { void T55xxResetRead(void) { LED_A_ON(); - // send r* 00 - uint8_t arg = 0x80; // SendCMD will add correct reference mode based on flags (when added). + // send r* 00 + uint8_t arg = 0x80; // SendCMD will add correct reference mode based on flags (when added). - // Add in downlink_mode when ready - // arg |= 0x00; // dlmode << 3 (00 default - 08 leading 0 - 10 Fixed - 18 1 of 4 ) + // Add in downlink_mode when ready + // arg |= 0x00; // dlmode << 3 (00 default - 08 leading 0 - 10 Fixed - 18 1 of 4 ) //clear buffer now so it does not interfere with timing later BigBuf_Clear_keep_EM(); @@ -1474,7 +1474,7 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { 1xxxxxxx 0x80 reset */ - bool testMode = ((arg & 0x04) == 0x04); + bool testMode = ((arg & 0x04) == 0x04); arg &= (0xff ^ 0x40); // Called for a write, so ensure it is clear/0 LED_A_ON (); @@ -1509,7 +1509,7 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { } // turn field off FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - + cmd_send(CMD_ACK,0,0,0,0,0); LED_A_OFF (); @@ -1517,7 +1517,7 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { // Read one card block in page [page] void T55xxReadBlock (uint16_t arg0, uint8_t Block, uint32_t Pwd) {//, struct T55xx_Timing *Timing) { - + LED_A_ON(); /* @@ -1530,11 +1530,11 @@ void T55xxReadBlock (uint16_t arg0, uint8_t Block, uint32_t Pwd) {//, struct T55 x1xxxxxx 0x40 called for a read, so no data packet 1xxxxxxx 0x80 reset */ - + // Set Read Flag to ensure SendCMD does not add "data" to the packet arg0 |= 0x40; - // RegRead Mode true of block 0xff + // RegRead Mode true of block 0xff if (Block == 0xff) arg0 |= 0x20; //make sure block is at max 7 @@ -1542,7 +1542,7 @@ void T55xxReadBlock (uint16_t arg0, uint8_t Block, uint32_t Pwd) {//, struct T55 //clear buffer now so it does not interfere with timing later BigBuf_Clear_ext(false); - + T55xx_SendCMD (0, Block, Pwd, arg0); //, true); // Turn field on to read the response @@ -1573,13 +1573,13 @@ void T55xxWakeUp(uint32_t Pwd){ x1xxxxxx 0x40 called for a read, so no data packet 1xxxxxxx 0x80 reset */ - - // r* 10 (00) r* for llr , L0 and 1/4 - (00) for L0 and 1/4 - All handled in SendCMD - // So, default Opcode 10 and pwd. - uint8_t arg = 0x01 | 0x40 | 0x20; //Password Read Call no data | reg_read no block - - // Add in downlink_mode when ready - // arg |= 0x00; // dlmode << 3 (00 default - 08 leading 0 - 10 Fixed - 18 1 of 4 ) + + // r* 10 (00) r* for llr , L0 and 1/4 - (00) for L0 and 1/4 - All handled in SendCMD + // So, default Opcode 10 and pwd. + uint8_t arg = 0x01 | 0x40 | 0x20; //Password Read Call no data | reg_read no block + + // Add in downlink_mode when ready + // arg |= 0x00; // dlmode << 3 (00 default - 08 leading 0 - 10 Fixed - 18 1 of 4 ) T55xx_SendCMD (0, 0, Pwd, arg); //, true); @@ -1592,8 +1592,8 @@ void T55xxWakeUp(uint32_t Pwd){ void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) { // write last block first and config block last (if included) for (uint8_t i = numblocks+startblock; i > startblock; i--) { - T55xxWriteBlock(blockdata[i-1],i-1,0,0);//,false); //,&T55xx_Timing_FixedBit); - // T55xx_SendCMD (blockdata[i-1],i-1,0,0);//,false); //,&T55xx_Timing_FixedBit); + T55xxWriteBlock(blockdata[i-1],i-1,0,0);//,false); //,&T55xx_Timing_FixedBit); + //T55xx_SendCMD (blockdata[i-1],i-1,0,0);//,false); //,&T55xx_Timing_FixedBit); } }