From: Adam Laurie Date: Tue, 21 Feb 2017 17:53:56 +0000 (+0000) Subject: buspirate config for debricking X-Git-Tag: v3.0.0~70^2 X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/commitdiff_plain/a386043fa9d1bbe2bb981be940d34e2372671f3e buspirate config for debricking --- diff --git a/tools/at91sam7s512-buspirate.cfg b/tools/at91sam7s512-buspirate.cfg new file mode 100644 index 00000000..64473667 --- /dev/null +++ b/tools/at91sam7s512-buspirate.cfg @@ -0,0 +1,52 @@ +# Ports +telnet_port 4444 +gdb_port 3333 + +# Interface +interface buspirate +buspirate_port /dev/ttyUSB0 +adapter_khz 1000 + +# Communication speed +buspirate_speed normal # or fast + +# Voltage regulator: enabled = 1 or disabled = 0 +buspirate_vreg 1 + +# Pin mode: normal or open-drain +buspirate_mode normal + +# Pull-up state: enabled = 1 or disabled = 0 +buspirate_pullup 1 + +# use combined on interfaces or targets that can't set TRST/SRST separately +reset_config srst_only srst_pulls_trst + +jtag newtap sam7x cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x3f0f0f0f + +target create sam7x.cpu arm7tdmi -endian little -chain-position sam7x.cpu + +sam7x.cpu configure -event reset-init { + soft_reset_halt + mww 0xfffffd00 0xa5000004 # RSTC_CR: Reset peripherals + mww 0xfffffd44 0x00008000 # WDT_MR: disable watchdog + mww 0xfffffd08 0xa5000001 # RSTC_MR enable user reset + mww 0xfffffc20 0x00005001 # CKGR_MOR : enable the main oscillator + sleep 10 + mww 0xfffffc2c 0x000b1c02 # CKGR_PLLR: 16MHz * 12/2 = 96MHz + sleep 10 + mww 0xfffffc30 0x00000007 # PMC_MCKR : MCK = PLL / 2 = 48 MHz + sleep 10 + mww 0xffffff60 0x00480100 # MC_FMR: flash mode (FWS=1,FMCN=72) + sleep 100 + +} + +gdb_memory_map enable +#gdb_breakpoint_override hard +#armv4_5 core_state arm + +sam7x.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0 +flash bank sam7x512.flash.0 at91sam7 0 0 0 0 sam7x.cpu 0 0 0 0 0 0 0 18432 +flash bank sam7x512.flash.1 at91sam7 0 0 0 0 sam7x.cpu 1 0 0 0 0 0 0 18432 +