Added iso14443b_setup and iso14443b_apdu for general setup and
communication with ISO 14443 type B tags.
Updated EPA (German electronic ID card) functionality to support both
card types.
pwpiwi [Mon, 29 Jun 2015 07:07:54 +0000 (09:07 +0200)]
- fix: ensure that FpgaDownloadAndGo() is always called before requesting
any memory from BigBuf[]. This is required because FpgaDownloadAndGo() might
allocate, use, and free most of BigBuf[] when decompressing FPGA configs.
- cleanup: remove rests of deprecated "end of trace markers" (0x44)
pwpiwi [Wed, 24 Jun 2015 06:29:59 +0000 (08:29 +0200)]
fix: fpga_compressor file size check
- commit 61611f5 fixed the check in case of correct filesizes but fails
in case of files which are too big to fit in fpga_config[]
- fix exit codes and Makefile to handle errors correctly during make
marshmellow42 [Tue, 23 Jun 2015 16:16:23 +0000 (12:16 -0400)]
fix bug in pskdemod return value if no samples...
... caused crash in data psknexwatchdemod if no samples were in the
graphbuffer.
also fixed hf mfu wrbl and rdbl to allow printing of help without a tag
being present.
Frederik Möllers [Mon, 22 Jun 2015 12:20:13 +0000 (14:20 +0200)]
Add PACE replay functionality
This function allows the user to specify APDUs which are sent to a card
supporting the PACE protocol. The response times are measured and
printed.
The code was pulled from the old Google Code repository (branch "epa")
and modified to fit into the new code base.
pwpiwi [Fri, 12 Jun 2015 05:43:00 +0000 (07:43 +0200)]
fixing iso14443b (issue #103):
- fix: IQ demodulator (FPGA)
- fix: approximately align reader signal delay to tag response delay (FPGA)
- fix: remove deprecated RSSI calculation to improve decoder speed (iso14443b.c)
- fix: better approximation of signal amplitude to avoid false carrier detection (iso14443b.c)
- fix: remove initial power off in iso14443b raw command (iso14443b.c)
- add: enable tracing for iso14443b raw command (iso14443b.c)
- fix: client crashed when checking CRC for incomplete responses (iso14433b.c)
- speeding up snoop to avoid circular buffer overflow
- added some comments for better documentation
- rename functions (iso14443 -> iso14443b)
- remove unused code in hi_read_rx_xcorr.v
pwpiwi [Tue, 2 Jun 2015 20:27:14 +0000 (22:27 +0200)]
fixing iso14443b (issue #103):
- most significant bit of tag data (which happens to be the sign bit)
had been dropped when snooping (FPGA change)
- avoid trying to decode both tag and reader data when snooping (we don't
have the time to do so).
marshmellow42 [Wed, 27 May 2015 16:24:13 +0000 (12:24 -0400)]
clean up mfu device side code
+ add xor calc to util (prep for desfire)
commented out MifareUWriteBlockCompat as it isn't used in client
currently (it is a command we could support.. but why?)
relabeled a few device side mfu functions to be clearer.
pwpiwi [Tue, 26 May 2015 05:37:50 +0000 (07:37 +0200)]
also delete *.bin and fpga_compressor when "make clean".
Add target to make fpga_compressor when client is not yet compiled.
Get version information and cache it when client starts (avoids clearing
BigBuf when calling hw version).
Add some comments and remove debugging printouts.
Add version info and ChangeLog in modified zlib.
pwpiwi [Fri, 8 May 2015 06:17:40 +0000 (08:17 +0200)]
Compress the .data section as well (saves another 4KBytes and comes for free)
zlib tuning: prevent fpga_compress from generating fixed code blocks
armsrc/Makefile: replace osimage with fullimage
fpga_compress: interleave (combine) fpga_lf.bit and fpga_hf.bit before compression.
fpga_loader.c: change to unweave fpga_lf and fpga_hf accordingly
prepare fpga_compress, fpga_loader and Makefile to handle more than two FPGA config files
revert removal of fullimage Makefile target. Remove osimage instead.
replaced gzip with an own compressor tool (fpga_compress.c, based on zlib)
This allows to remove the gzip header support and the z_crc32.[ch] files
(which saves more than 2KBytes of the ARM's flash memory)
Finish support for compressed FPGA images in fpgaloader.c
- move zlib source files to separate directory zlib
- rename zlib/crc32.[ch] to zlib/z_crc32.[ch]
add: hw ver: show FPGA versions for both HF and LF FPGA configs
add: hw ver: show used and free flash memory
chg: prepare fpgaloader for compressed FPGA configs